-
autopkgtest (5.35) unstable; urgency=medium
[ Christian Kastner ]
* qemu: Drop ifupdown from image creation
[ Florent 'Skia' Jacquet ]
* tools/a-b-lxd: make sure the reboot happens when needed
* ssh-setup/nova: explicitely set 'fqdn' in cloud-init
[ Paride Legovini ]
* install_apt: drop broken debugging stage
* find_source_version_to_download: do not consider udebs
* Resolve and install test dependencies using apt-get satisfy
* d/control: bump Build-Depends: python3 to >= 3.8
* d/control: bump versioned Suggests: vmdb2 to >= 0.25-1.
Thanks to Christian Kastner
* d/control: drop build-dependency on python3-mock (Closes: #1060447)
* d/control: make Build-Depends required by tests <!nocheck>
* tests: add pre-commit-config and yamllint configuration
* tests: unshare: skip test (exit 77) if simple unshare command fails
* tests: unshare: skip test if kernel.apparmor_restrict_unprivileged_userns=1
* tests: docker: make the docker daemon inherit the proxy settings
* tests: schroot: use default value (DIRECT) for $https_proxy
* tests: when dpkg-vendor is Ubuntu, test on Ubuntu containers
* tests: make the lxd test work on Ubuntu
* Assume that if root-on-testbed then we can use apt (Closes: #1042971)
* autopkgtest-build-lx*: fix shellcheck warnings and check in pre-commit
* ssh-setup/nova: fix shellcheck warnings and check in pre-commit
[ Frode Nordahl ]
* autopkgtest-build-lxd: Extract lxc client version correctly.
* autopkgtest-build-lxd: Add missing remote prefix in get_boot_id().
[ Paul Gevers ]
* runner/autopkgtest: virt-ssh gets confused by newlines in create_command
* tests: skip test_copy_timeout (Addresses: #1068363)
[ Luca Boccassi ]
* lxc: define /tmp mount via lxc-start
-- Paul Gevers <email address hidden> Sun, 12 May 2024 09:27:10 +0200
-
autopkgtest (5.34) unstable; urgency=medium
[ Victor Westerhuis ]
* Let vmdb2 write /etc/fstab in autopkgtest-build-qemu
[ Nick Rosbrook ]
* add support for deb822 sources (LP: #2052639)
[ Julian Andres Klode ]
* ssh: Set ConnectionAttempts=20 in auxverb
* lxd: Increase various timeouts
[ Paride Legovini ]
* install_apt: drop retry loop on AptDownloadError
* build-dep: improve error handling
* runner: rely on package versions to select which src package to download
[ Paul Gevers ]
* autopkgtest-build-lxc: repair proxy detection for lxc.network deprecation
(Closes: #1067406)
* autopkgtest-build-lxc*: add support to not have apt proxy autodetected
(Closes: #933064)
[ Antonio Terceiro ]
* autopkgtest-virt-lxc: add option to choose container location
-- Paride Legovini <email address hidden> Wed, 03 Apr 2024 11:06:34 +0200
-
autopkgtest (5.33) unstable; urgency=medium
[ Antonio Russo ]
* virt-schroot: config, val splits on = exactly once
[ Frode Nordahl ]
* autopkgtest-build-lxd: Await boot before setup on VM build.
* autopkgtest-build-lxd: Add remote support.
[ Paul Gevers ]
* autopkgtest-virt-lxc: remove ancient code path
* tests: completely disable podman-init autopkgtest as it fails nasty
[ Arnaud Rebillout ]
* setup-testbed: Add non-free-firmware component for Debian and Debian-like
[ Paride Legovini ]
* On package build, use apt-get build-dep (if available on the testbed)
* Assume that dpkg-query (which is Essential) is available
* Makefile: fully clean package build artifacts
* autopkgtest-build-lxd: fix unbound variable error
* autopkgtest-buildvm-ubuntu-cloud: drop workaround for LP: #1427999
* autopkgtest-buildvm-ubuntu-cloud: default to 2GB of RAM (LP: #1973628)
* CI: include jobs from the salsa-ci-team Debian pipeline
* CI: also run the NullRunner-like tests on the Ubuntu devel release
* Add myself to Uploaders
[ Christian Kastner ]
* qemu: Don't attempt poweroff on uninitialized VM
[ Florent 'Skia' Jacquet ]
* d/t/unshare: make test runnable on Ubuntu
* l/adtlog: fix deadlock when low on free space
* tests: add a testcase for testbed deadlock when running low on free space
[ Iain Lane ]
* ssh-setup/nova: Use `openstack network show` in preference to `nova`
[ Stefano Rivera ]
* Document some more possible errors in summary (Closes: #1059881)
[ Luca Boccassi ]
* apt build-dep: use --env (Closes: #956931)
[ Heinrich Schuchardt ]
* qemu: use device-tree for booting riscv64 (LP: #2056764)
* qemu: boot riscv64 via EFI (LP: #2056764)
-- Paride Legovini <email address hidden> Thu, 14 Mar 2024 12:18:38 +0100
-
autopkgtest (5.32) unstable; urgency=medium
[ Florent 'Skia' Jacquet ]
* d/t/schroot: better use of existing variables
* d/t/schroot: allow running behind a proxy
[ Simon McVittie ]
* testarchive: Fix a pycodestyle warning
* Standards-Version: 4.6.2 (no changes required)
* qemu: Use 4M OVMF images if available
[ Stefano Rivera ]
* Testbed: Kill with SIGKILL if SIGTERM doesn't do the job in 10 seconds
(Closes: #1059444)
[ Paul Gevers ]
* tests: increase sleep in test_timeout() for lxd test (Closes: #1020634)
* autopkgtest-virt-qemu: raise time for command prompt return
* virt-qemu: add context to several timeout errors
[ Michael Biebl ]
* Bump default ram-size for virt-qemu to 2048 (Closes: #1059840)
[ Colin Watson ]
* Add Incus support
[ Santiago Ruano Rincón ]
* Make autopkgtest-build-qemu pass mirror info to setup-testbed
(Closes: #1060426)
[ Paul Gevers ]
* tests: increase --timeout-build to accommodate for riscv64
* tests: mark podman-init autopkgtest flaky for now
-- Paul Gevers <email address hidden> Thu, 11 Jan 2024 14:06:22 +0100
-
autopkgtest (5.31.2) unstable; urgency=medium
[ Florent 'Skia' Jacquet ]
* d/control: add genisoimage as suggested package.
It's used in `autopkgtest-buildvm-ubuntu-cloud`.
[ Paul Gevers ]
* autopkgtest-build-qemu: drop use of qemu-debootstrap.
This is not needed in Debian 11 or newer. (Closes: #1038826)
[ Simon McVittie ]
* d/rules: Don't fail the build if a lint check fails (Closes: #1058550)
* qemu, testdesc: Convert "# type:" comments into variable annotations.
This avoids unused import warnings with current versions of pyflakes.
-- Simon McVittie <email address hidden> Sun, 24 Dec 2023 16:50:37 +0000
-
autopkgtest (5.31.1) unstable; urgency=medium
* runner: fix architecture wildcard support broken in 30d5aa7
* runner: fail badpkg in case no source was found like before 30d5aa7
-- Paul Gevers <email address hidden> Sun, 12 Nov 2023 21:35:20 +0100
-
autopkgtest (5.31) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* lib/autopkgtest_qemu.py: use -machine type=virt,gic-version=max when
running natively on arm64 for kvm acceleration
[ Tim Andersson ]
* add ssh connect timeout to ssh-setup/nova
* setup-testbed: Set apt error mode as any
[ Paul Gevers ]
* adt_testbed: factor out add-apt-sources
* adt_testbed: factor out get-default-release
* adt_testbed: factor out shell code to create sources.lists
* Rewrite of source version selection in Python
* create-sources.list-for-pocket: minor logical improvements
* add-apt-sources: some checks of input arguments
[ Jochen Sprickerhof ]
* Update resolv.conf in unshare chroot
[ Samuel Thibault ]
* Fix hyphens in manpages
[ Mateus Rodrigues de Morais ]
* Add --cpus to buildvm-ubuntu-cloud tool
[ Christian Kastner ]
* qemu: Add option to poweroff gracefully
-- Paul Gevers <email address hidden> Mon, 06 Nov 2023 20:40:32 +0100
-
autopkgtest (5.30) unstable; urgency=medium
[ Christian Kastner ]
* Set umask while initializing DebBinaries, fixing permissions errors
when running virt-podman with a restrictive umask (Closes: #1032487)
[ Helmut Grohne ]
* virt-qemu: Use a lock file to resolve a race condition when allocating
a port for ssh
* build-{qemu,lxc}, buildvm-ubuntu-cloud: Explicitly pass RELEASE to
setup-testbed when known
* build-qemu: Don't use ext4 features unsupported in the target release
[ Jochen Sprickerhof ]
* qemu: Better riscv64 support
- Use -machine=virt on riscv64
- Specify a riscv64-compatible network device for all architectures
[ Stefano Rivera ]
* build-lxd: Explicitly reuse aliases with lxd >= 5.14, which will no
longer overwrite an existing alias by default
[ Simon McVittie ]
* d/README.source: Add a policy for autopkgtest dependencies:
- Host system: aiming to support latest Debian stable or Ubuntu LTS,
and the previous stable/LTS if it's straightforward to do so
- Testbed: aiming to support Debian 8+ or Ubuntu 14.04+
* testbed: Use sudo -n true instead of sudo -n -v to detect
ability to run sudo without password, resulting in it being detected
successfully in more cases
* testbed: Move more environmental setup into wrapper.sh
* testbed: Factor out Perl code to parse dependencies
* setup-testbed:
- Remove code that was only needed for Ubuntu 12.04 on armhf
- Only auto-detect RELEASE, MIRROR when necessary
* tests:
- Add a convenience `make check` target
- Fix a failing qemu test
- Run more tests in CI and during package build
- d/tests/lxd: Fix test failure by installing recommended dnsmasq-base
package
- d/tests/lxd: Use stable image, fixing testing while
images.linuxcontainers.org doesn't provide an image for trixie yet
- Remove stale reference to SchrootClickRunner tests, which were removed
in mid 2022
- CI: Use testing instead of unstable, to avoid temporary regressions
such as #1042498
- CI: Test the unshare backend on stable instead of unstable
- CI: Run basic tests on Debian 11
* Fix some shellcheck warnings
[ Paride Legovini, Simon McVittie ]
* testbed: Install satdep using apt-get install /path/to/*.deb if possible
(apt >= 1.1, available in Debian 9+ or Ubuntu 16.04+), falling back to
using dpkg --unpack and apt-get -f install as before for Debian 8 and
Ubuntu 14.04
[ Gioele Barabucci ]
* lib/VirtSubproc: Use explicit paths for commands in downtmp,
fixing testbed failure if the default shell is changed to busybox
during testing
[ Antonio Terceiro ]
* Add --timeout option, which sets a global timeout for all commands
that are controlled by the source package being tested
(the build if the needs-build restriction is present, and the tests
themselves).
[ Raphaël Hertzog ]
* debian: Depend on mawk >= 1.3.4 for systime() function, required
since 5.29
-- Paul Gevers <email address hidden> Sun, 30 Jul 2023 19:31:21 +0200
-
autopkgtest (5.29) unstable; urgency=medium
[ Brian Murray ]
* Fix a typo
[ Paride Legovini ]
* Prevent --apt-pocket from setting the wrong default release
(Closes: #1032314) (LP: #2009191)
[ Antonio Terceiro ]
* autopkgtest-virt-lxc: call timeout sudo instead of sudo timeout
[ Helmut Grohne ]
* autopkgtest-build-qemu: add --keyring argument
* autopkgtest-build-lxc: add --keyring option for consistency with qemu
* setup-testbed: check the testbed for init-availability
* setup-testbed: reliably deny starting services
[ Tim Andersson ]
* Fix docker build command not returning 1 on failure, causing test to fail
and not be marked as skippable when run behind a proxy
* Add timestamps to logfile
-- Antonio Terceiro <email address hidden> Wed, 14 Jun 2023 20:23:45 -0300
-
autopkgtest (5.28) unstable; urgency=medium
[ Jochen Sprickerhof ]
* virt-unshare: use rbind to mount subtrees
[ Christian Kastner ]
* QEMU: Enable virtio-serial exactly once (Closes: #1003002)
[ Paride Legovini ]
* Pin pockets with Pin-Priority: 500
[ Paul Gevers ]
* virt/podmon: don't fail on stderr while stopping container
[ Ryan Tandy ]
* Fix qemu failing to boot raw base image (Closes: #1004226)
[ Jelmer Vernooij ]
* Print nicer error message when cleaning up schroot times out.
-- Paul Gevers <email address hidden> Mon, 30 Jan 2023 19:29:59 +0100
-
autopkgtest (5.27) unstable; urgency=medium
[ Julian Gilbey ]
* Add timezone to initial informative line
[ Johannes Schauer Marin Rodrigues ]
* setup-commands/setup-testbed: support running in d-i
[ Simon McVittie ]
* setup-testbed: Remove /usr/sbin/policy-rc.d when setting up init
* setup-testbed: Install procps along with sysv-rc or openrc
[ Emanuele Rocca ]
* qemu-system-aarch64: use read-only=on
* Add zerofree to Suggests, needed by autopkgtest-build-qemu
[ Paul Gevers ]
* Improve Architecture field documentation
* Retry lxc-copy and lxc-start if they fail
* adt_testbed: fix logical error
-- Paul Gevers <email address hidden> Wed, 26 Oct 2022 22:11:34 +0200
-
autopkgtest (5.26) unstable; urgency=medium
[ Simon McVittie ]
* Add a needs-sudo restriction.
This can be used by packages like gvfs to run tests that need to be run
as an ordinary user, but also require the ability to elevate privileges
to do setup and/or teardown steps. (Closes: #906424)
* Fix a long-standing race condition in test stdout/stderr reporting,
which particularly affects the unshare backend (Closes: #1017974)
* await-boot: Fix a regression in 5.25 which affected tests that
reboot into a sysvinit environment, such as munin
* Start factoring out shell code that runs in the testbed into scripts
lib/in-testbed/*.sh, so that we can include comments, run lint checks
and other useful QA things
* testbed: Make reboot-request detection clearer by not relying on
compensating errors
* testbed, runner: Remove leftover bits of support for install-tmp mode,
which was removed in 5.12
* d/README.source: Document how to run snap lxd via sudo
* doc: Sort restrictions and capabilities in alphabetical order
* runner: Fix a pycodestyle warning
* d/tests/lxd: Update to work with the version in Debian unstable
- Add more test-dependencies
- Modernize use of `lxd init`
- Run as a user in the appropriate group
- Use Debian testing instead of EOL Ubuntu 16.04 (Closes: #1016912)
* d/tests/schroot: Ensure hostname resolves promptly
* tests: Improve debug output for tests that reboot
* tests: Avoid polluting stderr with diagnostic output
* tests: Treat AUTOPKGTEST_TEST_INSTALLED= as uninstalled
* tests: Make a test cope with custom arguments to virt backend
* tests: Don't assert that there is no debug output from virt backend
* tests: Get more debug info from SchrootRunner.test_foreign_arch_deps
* tests: Get more debug info from DebTestsVirtContainer.test_timeout
* tests: Get extra debug information from test_copy_timeout
* tests: Skip test_timeout on lxd backend.
This currently fails, which seems to be reliable, lxd-specific, and
not a recent regression in autopkgtest. (Mitigates: #1020634)
[ Paul Gevers ]
* testbed: Fix creation of apt preferences for suites with a dot in
the name
[ Paride Legovini ]
* qemu: Detect ppc64le host as able to run ppc64le qemu with KVM
enabled (Closes: #1019189, LP: #1988527)
-- Simon McVittie <email address hidden> Sun, 25 Sep 2022 10:35:21 +0100
-
autopkgtest (5.25) unstable; urgency=medium
[ Antonio Terceiro ]
* tests/autopkgtest: Fix test failure if the user has per-user
containers in ~/.local/share for both lxc and the podman ecosystem
[ Simon McVittie ]
* Improve reliability of waiting for lxc, lxd, podman containers to
boot an init system (Closes: #1017753)
* On non-amd64 architectures, skip a test that assumes i386 can be a
foreign architecture
* Clarify documentation for Restrictions:
- isolation-container implies a service manager (init system) such as
systemd or sysv-rc
- isolation-container does not guarantee logind
- isolation-machine provides the same things as isolation-container
- needs-root is at least root in a container, but not always global root
Thanks: Paride Legovini
-- Simon McVittie <email address hidden> Wed, 24 Aug 2022 09:49:01 +0100
-
autopkgtest (5.24) unstable; urgency=medium
[ Jochen Sprickerhof ]
* Install unshare-helper, fixing virt-unshare regression in 5.23
[ Antonio Terceiro ]
* virt-lxc: fix handling of --sudo when waiting for testbed to boot
(Closes: #1017017)
[ David Kalnischkies ]
* virt-unshare: Create mount point for --bind if necessary
[ Simon McVittie ]
* testdesc: Represent restrictions and features as sets
* testdesc: Check restrictions vs. capabilities in a data-driven way
* build-docker(1): Fix an invalid groff macro (thanks, Lintian)
* ssh-setup/maas: Silence a Lintian false positive
* Test coverage for regressions in 5.23:
- Test virt-unshare as an autopkgtest to exercise "as-installed" use
- Test virt-lxc as an ordinary user, to detect regressions like #1017017
- Test virt-unshare --bind
* Test reliability:
- Use testing in preference to unstable to avoid transient failures
during transitions
* Packaging updates:
- Update syntax of Lintian overrides
- Add myself to Uploaders
- Standards-Version: 4.6.1 (no changes required)
- d/tests: Correct SPDX license name
-- Simon McVittie <email address hidden> Fri, 12 Aug 2022 09:39:40 +0100
-
autopkgtest (5.23) unstable; urgency=medium
[ Iñaki Malerba, Chris Kuehl, Felipe Sateler, Simon McVittie ]
* Add support for docker.io virtualization (Closes: #747909)
[ Simon McVittie ]
* virt-docker, build-docker: Allow running as virt-podman, build-podman
* virt-podman, build-podman: Add --init option.
Docker is designed to be used for "app containers", which are like a
better-isolated chroot. Podman can be used like this, but can also be
used to run traditional full-system containers in the same way as lxc
and lxd, and in particular it has special support for running systemd
as the container's init system.
When we're running a service manager like systemd, sysv-rc or openrc,
we can provide the isolation-container capability.
* autopkgtest: Make --test-name repeatable (Closes: #1015921)
* build-podman, build-qemu: Optionally swap or force the init system:
systemd (+ logind), sysv-rc (+ elogind) or openrc (+ elogind).
For qemu, the default is what debootstrap provides, usually systemd.
For podman, the default is no init system at all.
* Automatically create an unprivileged user to run tests if the testbed
is expendable.
This avoids needing to create an unprivileged user when building
container and VM images, which build-lxc and build-podman don't do.
(Closes: #1011202)
* Load setup commands from the source tree if running uninstalled
* Don't recurse or crash if auxverb_debug_fail fails
* virt-lxc, virt-lxd: Factor out code to wait for container to boot.
virt-lxc, virt-lxd and podman --init all want to do the same thing.
* virt-unshare: Factor out unshare-helper into a shell script
* Improve setup-testbed script:
- Stop installing gpg.
We've been installing this since 2018, but it seems we haven't needed
it since we switched from apt-key to [trusted=yes] in 2015.
- Only install dbus, rng-tools if we have an init system
- Only install libpam-systemd if systemd is installed
- Only set up ifupdown if it's installed
- If we overwrite sources.list, also empty sources.list.d
- Don't crash if unable to read /etc/apt/sources.list
- Have a separate proxy setting for setup-testbed itself
- Don't use /usr/share/doc to check package status
- Silence a new shellcheck warning
* Add a test that asserts tests can access pseudo-terminals
* Run more tests on Gitlab-CI and from autopkgtest:
- autopkgtest-virt-docker (can run via docker:dind or in qemu)
- autopkgtest-virt-lxc (can run under privileged Docker or qemu)
- autopkgtest-virt-podman (can run under privileged Docker or in qemu)
- autopkgtest-virt-podman --init (can run in qemu)
- autopkgtest-virt-schroot (can run under privileged Docker, lxc or qemu)
* Test fixes, particularly for running tests that require privileges:
- Fix ChrootRunner failure with glibc 2.34
- Make dependencies more complete
- Skip test_apt_autodep8_with_control if autodep8 not installed
- Speed up test_git_source_build
- Update for perl autodep8 behaviour changes in bullseye
- Test the installed autopkgtest runner so autopkgtest doesn't break
its own specification
- Don't run lint-style tests as an autopkgtest, notably pyflakes
- Accept more variations of apt output
- Fix build of mock test package if a second binary is added
- Cope with schroot not always having AUTOPKGTEST_NORMAL_USER
- Make test failures easier to debug
- Tolerate output before first explicit setup command
- Cope with XDG basedirs environment variables being set
- Speed up testing source package from apt by using a simpler package
(src:tap.py rather than src:gdk-pixbuf)
- Speed up testing schroot backend by repeating fewer tests
- Speed up testing schroot backend by using /var/lib/schroot/unpack
(schroot users should mount a fast filesystem in that location,
ideally a tmpfs if they have enough RAM available)
- Speed up testing schroot backend by using an uncompressed tarball
- Ignore absence of /dev/pts while testing the virt-chroot backend
- Make Podman containers available in mock home directory
- Never completely clear the environment
- Make the test apt archive readable by everyone, fixing failures with
some virtualization backends
- Install libpam-elogind instead of libpam-systemd in VMs and system
containers that boot with a non-systemd init
* Documentation:
- d/README.source: Refer to latest Debian stable and Ubuntu LTS
- d/README.source: Don't recommend manual setup for lxc networking,
no longer needed
- d/README.source: Describe how to run unit tests
- Fix name of build-needed restriction in man page
* Clean up dead code:
- Remove support for click and Ubuntu Mobile.
These technologies are no longer maintained, and none of the
autopkgtest maintainers test autopkgtest's support for them, so
it's very likely that this doesn't actually work anyway.
(Closes: #1011207)
- Remove internal support for obsolete actions from the pre-2017
adt-run CLI
[ Jochen Sprickerhof ]
* virt-unshare: add /dev/{stdin,stdout,stderr}
* virt-unshare: support bind mounts
* virt-unshare: reduce redundancy
[ Paride Legovini ]
* virt-lxd: Add support for LXD VMs
* buildvm-ubuntu-cloud: fix Xenial disk image name
[ Guilhem Moulin ]
* Fix "UnboundLocalError: local variable 'n' referenced before assignment"
(Closes: #1010338)
[ Johannes Schauer Marin Rodrigues ]
* virt-unshare: Mount a new instance of /dev/pts, fixing ability to
use script(1) and other users of pseudo-terminals
-- Simon McVittie <email address hidden> Wed, 10 Aug 2022 20:50:12 +0100
-
autopkgtest (5.22) unstable; urgency=medium
[ Luca Boccassi ]
* Add --skip-test command line option
[ Jochen Sprickerhof ]
* Add unshare backend
[ Simon McVittie ]
* Avoid more uses of which(1)
* buildvm-ubuntu-cloud: Don't rely on a global variable
* buildvm-ubuntu-cloud: Trim unused space from the image if possible
* buildvm-ubuntu-cloud: Optionally compress the final image
[ Jochen Sprickerhof ]
* [unshare] support suggested-normal-user
[ Paul Gevers ]
* Support current oldstable/updates which is need for security
-- Paul Gevers <email address hidden> Sat, 14 May 2022 12:55:32 +0200
-
autopkgtest (5.21) unstable; urgency=medium
[ Paul Gevers ]
* testdesc.py: reduce_restrictions instead of only reduce_arch
(Closes: #1008192)
* spec: improve wording of skip-not-installable
* testdesc: work around variables in d/control
* spec: be more specific what @recommends@ means
[ Antonio Terceiro ]
* autopkgtest-build-lxc: update container configuration (Closes: #979450)
-- Paul Gevers <email address hidden> Mon, 28 Mar 2022 21:20:12 +0200
-
autopkgtest (5.20) unstable; urgency=medium
* Determine build-needed by parsing the control (Closes: #1002477)
* Implement support for @recommends@ in test dependencies (Closes: #896698)
* Update documentation
* Convert `needs-recommends` to @recommends@ and drop all other code
related to it
-- Paul Gevers <email address hidden> Thu, 24 Feb 2022 20:29:51 +0100
-
autopkgtest (5.19) unstable; urgency=medium
[ Simon Chopin ]
* buildvm-ubuntu-cloud: add a --ram-size option
* buildvm-ubuntu-cloud: add support for non-x86 architectures
[ Paul Gevers ]
* autopkgtest-virt-lxc: cleanup if lxc-start fails after lxc-copy
[ Athos Ribeiro ]
* Force xz compression for satdep.deb
[ Sergio Durigan Junior ]
* Make sure we add a newline to the end of /etc/environment
-- Antonio Terceiro <email address hidden> Tue, 07 Dec 2021 09:28:26 -0300
-
autopkgtest (5.18) unstable; urgency=medium
[ Romain Porte ]
* Fix qemu deprecation warnings for short-form booleans (Closes: #996705)
[ Brian Murray ]
* Add support for building VMs of End of Life ubuntu releases.
-- Antonio Terceiro <email address hidden> Sat, 13 Nov 2021 11:44:27 -0300
-
autopkgtest (5.17) unstable; urgency=medium
[ Ryutaroh Matsumoto ]
* Use 32-bit OVMF EFI firmware for qemu-system-i386 (Closes: #973522)
* qemu: Explicitly assign unit numbers for pflash devices
[ Iain Lane ]
* lxd: Fix a race condition while rebooting
* buildvm-ubuntu-cloud: Update for compatibility with other changes
mentioned below
* ssh-setup/nova: Quote arguments to `tr`
[ Simon McVittie ]
* VirtSubproc: Allow expecting multiple options
* virt-qemu: Cope with passwordless shell (blank password)
* virt-qemu: Don't rely on exiting from a shell printing "logout"
* virt-qemu: Preseed debconf questions so we can upgrade grub-pc, if
installed (Closes: #982296)
* virt-qemu: Add --qemu-architecture, --dpkg-architecture options
* virt-qemu: Load virtio_console in initramfs to make sure it's ready
when systemd-getty-generator(8) looks for it (workaround for #689962)
* virt-qemu: Improve reliability of interactions with serial console shell
* build-qemu: Automatically run under fakemachine if not uid 0
* build-qemu: Convert image into an absolute path.
This helps when we're sharing directories as "volumes" with fakemachine.
The working directory inside fakemachine isn't necessarily the same as
the working directory outside, leading to the output image being
written somewhere unintended.
* build-qemu: Show the log from vmdb2 if it fails
* build-qemu: Placate pycodestyle
* build-qemu: Never set http_proxy to DIRECT.
The special keyword DIRECT is understood by apt, but not by generic
http clients, and in particular not understood by wget (used by
debootstrap).
* Use `command -v` in preference to `which`.
In Debian, which(1) is provided by the Essential debianutils package,
which recently deprecated it. Silence the resulting warnings by doing
this in a slightly less obvious way.
[ Simon McVittie, Ryutaroh Matsumoto ]
* setup-testbed: Try to put Linux console on both ttyS0 and hvc0.
ttyS0 is PC-specific, hvc0 is a generic hypervisor console available
on multiple hypervisors.
* setup-testbed: Put root shells on both ttyS1 and hvc1 if they exist.
ttyS1 is PC-specific, hvc1 is a generic hypervisor console available
on multiple hypervisors.
* virt-qemu: Only -enable-kvm if VM is compatible with host architecture
* virt-qemu: Add --boot=efi (formerly --efi)
* build-qemu: Add --boot=efi to build images bootable with EFI.
This requires vmdb2 0.22-1~ or newer.
* qemu: armhf and aarch64 support (Closes: #973038, #973663)
- Boot with EFI by default
- Build images with EFI by default (Closes: #990415)
- Use ttyAMA0 as the ARM equivalent of ttyS0
- Default to -machine virt, since there is no default in qemu
- Default to qemu-system-aarch64 -cpu host,aarch64=off -enable-kvm
for armhf on aarch64 host, because qemu-system-arm -enable-kvm is
not available on aarch64 hosts
- Default to -cpu host -enable-kvm for aarch64 on aarch64 host
- Default to -cpu cortex-a53 for aarch64 on non-aarch64 host
since that CPU seems to work well
Thanks to Christian Kastner, Peter Maydell and Steve McIntyre.
[ Simon McVittie, Thierry Fauck, Ryutaroh Matsumoto ]
* qemu: ppc64el support (Closes: #926945)
- Install grub-ieee1275 by default
- Avoid trying to allocate hvc0 as a virtio console.
The default serial port of a pSeries machine appears as /dev/hvc0,
and the virtio consoles start from hvc1.
Thanks to Christian Kastner
[ Christian Kastner ]
* qemu: Use -machine q35 on i386 or amd64 when booting with EFI.
Empirically, it seems to be the minimum required for EFI-booting on
i386; bump the machine on amd64 too, for consistency.
[ Julian Andres Klode ]
* setup-testbed: Remove needrestart so its dpkg hook does not interfere
with the apt test suite
* setup-testbed: Set Acquire::Retries 10, like debci does
* setup-testbed: Always include phased updates
-- Paul Gevers <email address hidden> Mon, 04 Oct 2021 21:04:48 +0200
-
autopkgtest (5.16) unstable; urgency=medium
[ Paul Gevers ]
* Fix reported arch in Unsupported message
[ Simon McVittie ]
* tests/ssh-setup-lxd: Fix a typo
* shell scripts: Quote more defensively
* tests/pycodestyle: Prefer command -v instead of which
* shell scripts: Prefer $() instead of backticks
* setup-testbed: Avoid test -a
* setup-testbed: Silence some shellcheck false-positives
* setup-testbed: Be more careful with printf
* setup-testbed: Ensure that $proxy is always initialized
* setup-testbed: Prefer POSIX grep -E over GNU-specific egrep
* setup-testbed: Quote trap command differently
* tests: Add shellcheck test
* tests: Silence some mypy warnings
* tests: Add test that runs mypy across the codebase
* d/copyright: Update
* Use shlex.quote in preference to undocumented pipes.quote
[ Ryutaroh Matsumoto ]
* autopkgtest-build-qemu: Install a PAE kernel on i386 (Closes: #973662)
* autopkgtest-build-qemu: Install LPAE kernel on armhf (Closes: #973592)
[ Simon McVittie ]
* lib: Factor out qemu virtual machine setup
* autopkgtest_qemu: Add QemuImage objects
* buildvm-ubuntu-cloud: Use Qemu object
* autopkgtest-build-qemu: Rewrite in Python
* autopkgtest-buildvm-ubuntu-cloud: Make return of None explicit
* autopkgtest-buildvm-ubuntu-cloud: Fail if release cannot be determined
* autopkgtest-buildvm-ubuntu-cloud: Replace which(1) with shutil.which
* autopkgtest_qemu: Set workdir before preparing overlay
[ Ryutaroh Matsumoto ]
* qemu: Forward stdout, stderr to stderr of parent process
* qemu: Extend timeout for checking python availability
* qemu: Enable discard operation on virtio disk devices
[ Simon McVittie ]
* qemu: Allow passing `uname -m` output to get_default_qemu_command
* tests: Add a unit test for qemu library code
* qemu: Select qemu-system-arm for ARM CPUs
[ Graham Inggs ]
* autpkgtest_args: autoremove after dist-upgrade
[ Balint Reczey ]
* Handle exception thrown by create_testinfo() (Closes: #927146)
(LP: #1907803)
[ Sébastien Delafond ]
* virt-lxc: attempt to cleanly shutdown the container first, and only
then pass --force to lxc-destroy (Closes: #979238)
-- Paul Gevers <email address hidden> Sun, 24 Jan 2021 21:15:20 +0100
-
autopkgtest (5.15) unstable; urgency=medium
[ Sebastien Delafond ]
* Remove left over .new containers before trying to generate a new one
(Closes: #971749)
[ Antonio Terceiro ]
* virt-lxc: extract common initial argument list for lxc-copy
* virt-lxc: add option to limit disk usage by tests
[ Paul Gevers ]
* tests/lxd: mark test skippable and exit 77 in stead of 0 in case of
balling-out
* Add support for Architecture field (Closes: #970513)
* Check for empty Tests field (Closes: #918882)
* With --test-name, don't report when other tests are skipped
(Closes: #960267)
[ Simon McVittie ]
* Check restrictions with testbed compat, not during initialization
* Allow restrictions to be ignored from the command line
[ Ivo De Decker ]
* Assume root-on-testbed with autopkgtest-virt-ssh and improve debugging
(Closes: #958727)
-- Paul Gevers <email address hidden> Mon, 26 Oct 2020 21:27:25 +0100
-
autopkgtest (5.14) unstable; urgency=medium
[ Christian Kastner ]
* autopkgtest-build-qemu: Support for vmdb2->qemu-debootstrap
(Closes: #959389)
[ Antonio Terceiro ]
* autopkgtest-build-qemu: make sure VM can resolve its own hostname
(Closes: #959713)
* autopkgtest: add --validate option
[ Iain Lane ]
* autopkgtest-virt-ssh: Give the wait_port_down socket a timeout
[ Simon McVittie ]
* Avoid using 'l' as a variable name
* qemu: Guess format of main disk image (Closes: #968598)
* tools: Don't make qemu guess what format the disk image is
[ Paul Gevers ]
* Bump standards
* Bump debhelper compat to 13 via debhelper-compat BD
* Add Rules-Requires-Root: no
* Drop postinst script as all supported releases have higher versions
-- Paul Gevers <email address hidden> Tue, 01 Sep 2020 21:28:29 +0200
-
autopkgtest (5.13.1) unstable; urgency=medium
* autopkgtest-build-qemu: revert commit that broke image creation
(Closes: #956659)
-- Antonio Terceiro <email address hidden> Fri, 17 Apr 2020 22:02:07 -0300
-
autopkgtest (5.13) unstable; urgency=medium
[ Gordon Ball ]
* Use pyflakes3 instead of pyflakes (Closes: #956338)
[ Paul Gevers ]
* Add support for needs-internet restriction
* Add note about ftp-master ruling (Closes: #954157)
* README.package-tests.rst: add documentation about needs-internet
restriction
* Update 5.12 changelog entry with bug number for qemu on ppc64el item
-- Paul Gevers <email address hidden> Thu, 16 Apr 2020 21:07:58 +0200
-
autopkgtest (5.12.1) unstable; urgency=medium
[ Antonio Terceiro ]
* adt_testbed: ignore debian/control when checking for dependencies. This
fixes a regression observed in the debci test suite.
-- Antonio Terceiro <email address hidden> Sat, 04 Apr 2020 12:20:17 -0300
-
autopkgtest (5.12) unstable; urgency=medium
[ Dan Streetman ]
* tools/autopkgtest-build-lxd: pass /dev/null on stdin to lxc launch
(LP: #1845037)
* autopkgtest: When finding src pkg, skip binary pkgs for other archs
(LP: #1845157) (Closes: #939790)
* autopkgtest: when checking binary pkg arch, allow *-$ARCH-* values also
[ Antonio Terceiro ]
* Drop unpacking of dependencies to temporary dir
[ Iain Lane ]
* setup-testbed: Install rng-tools
* lib/adt_testbed.py, runner/autopkgtest: Run --shell-fail in more situations
* adt_testbed: Run the debug-fail command in more circumstances
[ Sébastien Delafond ]
* Add kali support
[ Simon McVittie ]
* lxd: Actually exit the awk loop after the first apt source
* build-lxd: Quote MIRROR and RELEASE properly
* d/README.source: Document how to test various backends
[ Paul Gevers ]
* adt_testbed.py: add date to the start of log so we always have it
(Closes: #954366)
* Do not ignore distributions that have dashes in their name
* lxc/lxd: wait for sysvinit services to finish
Thanks to Lars Kruse (Closes: #953655)
* lxc: increase timeout around reboot
* tests/lxd: add skip-not-installable (Closes: #952594)
[ Jelmer Vernooij ]
* Document that $HOME will exist and will be writeable.
[ Thierry Fauck ]
* autopkgtest-build-qemu: create primary partition of type Prep to
support ppc64el with grub2
* Add proper kernel release name for ppc64el
-- Paul Gevers <email address hidden> Thu, 02 Apr 2020 10:36:09 +0200
-
autopkgtest (5.11) unstable; urgency=medium
[ Dan Streetman ]
* autopkgtest-buildvm-ubuntu-cloud: work with precise and trusty
(LP: #1822331) (Closes: #925966)
[ Sébastien Delafond ]
* Add an optional 6th parameter to autopkgtest-build-qemu, to force a
specific image size
[ Julian Andres Klode ]
* ssh-setup/nova: Run nova show after console-log in debug_failure
[ Iain Lane ]
* setup-testbed: Add the -security pocket for Ubuntu releases
* nova: Use glanceclient to find images
* nova: --key_name is actually --key-name
* setup-testbed: Write preserve_sources_list in the new format
* nova: trim whitespace from server UUID
[ Simon McVittie ]
* autopkgtest-build-qemu: Parse named parameters
* autopkgtest-build-qemu: Allow overriding apt proxy via command-line
[ Simon McVittie ]
* testdesc: Report each unsupported test individually (Closes: #851232)
* setup-testbed: Provide more options for handling /etc/apt/sources.list
(Closes: #933062)
[ Dan Streetman ]
* ssh-setup/nova: allow specifying --image with name or uuid
[ Valentin Vidic ]
* autopkgtest-virt-lxc: accept lxc arguments for ephemeral containers
[ Michael Biebl ]
* Use virtio-rng to passthrough RNG to qemu runner and drop haveged
[ Raphaël Hertzog ]
* qemu: Forward VM's ssh port only to localhost (Closes: #931219)
-- Paul Gevers <email address hidden> Thu, 05 Sep 2019 09:32:10 +0200
-
autopkgtest (5.10) unstable; urgency=medium
* autopkgtest-build-qemu: use UUID in fstab (Closes: #922671)
-- Antonio Terceiro <email address hidden> Mon, 25 Feb 2019 11:05:15 -0300
-
autopkgtest (5.9) unstable; urgency=medium
[ Iain Lane ]
* Add spaces around "[ trusted=yes ]"
[ Antonio Terceiro ]
* autopkgtest-build-qemu: document ARCHITECTURE parameter
* autopkgtest-build-qemu: call user script directly
* autopkgtest-build-qemu: create fstab (Closes: #916407)
* autopkgtest-build-qemu: fix setup of APT proxy
* autopkgtest-build-qemu: update to work with newer vmdb2
(Closes: #922501)
[ Christian Kastner ]
* autopkgtest-build-lxc: lxc/default.conf: lxc.network.type is now
lxc.net.0.type (Closes: #922171)
-- Antonio Terceiro <email address hidden> Mon, 18 Feb 2019 22:48:48 -0300
-
autopkgtest (5.8) unstable; urgency=medium
[ Simon McVittie ]
* qemu: Use socket.sendall() to push text into AF_UNIX sockets
[ Niko Tyni ]
* Ensure that autocleaned TempPath file names are unique (Closes:
#916499)
[ Thadeu Lima de Souza Cascardo ]
* qemu: close sockets after being done with them (Closes: #916428)
[ Iain Lane ]
* runner: Fix sed command for escaping special characters in package
names
[ Julian Andres Klode ]
* Minor fixes for the lxd test.
Thanks to Stéphane Graber <email address hidden>
-- Paul Gevers <email address hidden> Thu, 10 Jan 2019 18:33:45 +0100
-
autopkgtest (5.7) unstable; urgency=medium
[ Paul Gevers ]
* doc: remove confusing text about future systems
* runner/autopkgtest: initialize variable (Closes: #914191)
* doc: document test-name syntax (Closes: #915913)
* Also run autodep8 when d/control says so (Closes: #904776)
[ Martin Pitt ]
* Support foreign architecture test dependencies (Closes: #913082)
* lib/testdesc.py: Fix typo in regular expression
* autopkgtest-build-qemu: Fix uninitialized proxy_cmd variable
(Closes: #911963)
[ Iain Lane ]
* autopkgtest-build-lxd hack: mask <email address hidden>
* Re-enable apt-cache fallback for --only-source as needed in trusty
[ Christian Ehrhardt ]
* Better debugging info for failures due to non-installable test
dependencies
-- Paul Gevers <email address hidden> Thu, 13 Dec 2018 12:03:13 +0100
-
autopkgtest (5.6) unstable; urgency=medium
[ Simon McVittie ]
* Restore ability to boot pre-stretch systemd systems (Closes: #906227)
* runner: Document exit status 8 for "all tests skipped"
* Implement superficial as a test restriction (Closes: #904979)
* man page: Document that PASS can now be followed by details too
* Ignore pycodestyle W504 "line break after binary operator"
* tests/pycodestyle: Print all warnings before exiting unsuccessfully
* Fix most pycodestyle warnings for invalid escape sequences
[ Martin Pitt ]
* autopkgtest-buildvm-ubuntu-cloud: Drop obsolete Ubuntu release names
* doc: Clarify scope of tests
* Adjust lxd Suggests: (LP: #1788040)
[ Paul Gevers ]
* doc: deprecate needs-recommends
* Improve documentation of --no-apt-fallback
* runner/autopkgtest: improve apt-source for Debian
[ Antonio Terceiro ]
* autopkgtest-build-qemu: build VM images with vmdb2 (Closes: #904972)
-- Paul Gevers <email address hidden> Mon, 15 Oct 2018 20:35:36 +0200
-
autopkgtest (5.5) unstable; urgency=medium
[ Antonio Terceiro ]
* Different implementation to make sure to never pass an empty string as
username to `su`
* When using systemd, reboot via systemd-run
* test_breaks_testbed: allow output on stderr
[ Paul Gevers ]
* Fix whitespace in old parts of d/changelog
* Add gitlab pipelines to autopkgtest
* Fixes to be conform pycodestyle
* tests: replace encoding='utf-8' by universal_newlines=True for
python3.5 (stretch)
* Fix missing empty line in commit 30470603
* Add option to disable the apt fallback when dependencies can't be
installed due to pinning
* Make autopkgtest Build-Depends-Arch aware (Closes: #903398)
* Add skip-not-installable restriction (Closes: #905311)
* Drop ancient X-Python3-Version (thanks lintian)
[ Ian Jackson ]
* doc/README.package-tests.rst: document hint-testsuite-triggers
(Closes: #905310)
[ Simon McVittie ]
* runner: Document exit status 14 as possible
* tests: Don't rely on being able to install B-D as non-root (Closes:
#905677)
* tests: Skip test_tree_build_needed_success if necessary
* runner: Exit 8 if every test was skipped or otherwise ignored
(Closes: #901804)
-- Paul Gevers <email address hidden> Fri, 10 Aug 2018 20:27:40 +0200
-
autopkgtest (5.4.2) unstable; urgency=medium
[ Martin Pitt ]
* doc: Document "test-name" feature
* doc/README.package-tests.rst: Fix formatting of previous commit
[ Niko Tyni ]
* Fix versioned provides test dependency handling
* Refactor _synthesize_deps() parameters
* Properly handle virtual packages in alternative test dependencies
(Closes: #903975)
* Add test cases for alternative test dependencies improvements
[ Antonio Terceiro ]
* Always pass a non-empty user string to `su` (Closes: #904870)
-- Antonio Terceiro <email address hidden> Sun, 29 Jul 2018 12:13:06 -0300
-
autopkgtest (5.4.1) unstable; urgency=medium
* README.package-tests.rst: explain that architecture qualifiers are
allowed in Test-Depends
* SchrootRunner: add testcases for arch qualifiers in Test-Depends
* Fix regression on arch-specific packages with '@' in Test-Depends
(Closes: #903000)
-- Paul Gevers <email address hidden> Fri, 06 Jul 2018 20:05:39 +0200
-
autopkgtest (5.4) unstable; urgency=medium
[ Simon McVittie ]
* README.package-tests.rst: Document AUTOPKGTEST_NORMAL_USER
* d/tests/lxd: Don't assume all test-runners set AUTOPKGTEST_NORMAL_USER
* qemu: Only set up base image device if requested
* qemu: Document --baseimage
* qemu: Update test for --baseimage no longer being the default
* qemu, lxc, lxd: Look for a user account in the 1000-59999 range
(Closes: #897170)
* qemu: Add a shortcut for running tests on an EFI-booted image
* doc: Describe how to parse Features, Restrictions, Classes
* Add support for flaky tests (Closes: #851558)
* Add support for tests declaring themselves to have been skipped
* autopkgtest(1): Document FLAKY as a possible summary status
[ Balint Reczey ]
* Fix bashism in retrying apt update
[ Paul Gevers ]
* Enable testing to continue after badpkg (Closes: #832751)
* adt_testbed.py fix missed piece of regular expression in commit a7e1dad
* d/tests/autopkgtest Update SchrootRunner
* runner/autopkgtest: Drop Ubuntu 12.04 fallback
* manpage: make ordering consistent with --help (Closes: #901643)
[ Julian Andres Klode ]
* ssh-setup/nova: Add support for keystone v3 auth (LP: #1767433)
[ Rafael Laboissiere ]
* Set Maintainer email address to <email address hidden>
[ Niko Tyni ]
* Add a couple of testcases for versioned provides support
* Ensure synthesized test dependencies are not satisfied by versioned Provides
(Closes: #867081)
* Remove the old '(>= 0)' hack for ensuring '@' pulls in real packages
-- Paul Gevers <email address hidden> Mon, 02 Jul 2018 11:50:21 +0200
-
autopkgtest (5.3.1) unstable; urgency=medium
[ Iain Lane ]
* Fix typo in previous upload, preventing apt-get fallback to work
properly
[ Paul Gevers ]
* Sort os.listdir output in tests as the order is undefined, fixing
failures on i386 and s390x (Closes: #895824)
-- Paul Gevers <email address hidden> Sun, 22 Apr 2018 15:55:27 +0200
-
autopkgtest (5.3) unstable; urgency=medium
* Fix autopkgtest: update reference
* Use apt pinning instead of APT::Default-Release (Closes: #893754)
Thanks to Iain Lane for the initial patch.
* adt_testbed: pin default release to archive name for pocket use
(Closes: #894094)
-- Paul Gevers <email address hidden> Thu, 12 Apr 2018 15:20:15 +0200
-
autopkgtest (5.2) unstable; urgency=medium
[ Martin Pitt ]
* setup-commands/setup-testbed: Skip ifupdown configuration with netplan
[ Iain Lane ]
* lxc, lxd: If we're running systemd, wait until the network is up
(LP: #1749736)
* setup-testbed: Add gpg (or fall back to gnupg2)
[ Paul Gevers ]
* Escape single quotes when printing test command in testbed (Closes:
#893035)
* Add myself to uploaders
* adt_testbed: don't fail on non-UTF-8 characters in stderr (Closes:
#893599)
[ Antonio Terceiro ]
* Generalize regular expressions for parsing sources.list
-- Paul Gevers <email address hidden> Tue, 20 Mar 2018 13:05:31 +0100
-
autopkgtest (5.1) unstable; urgency=medium
[ Paul Gevers ]
* Error out when apt-get update fails for three times in a row
* Add release- to help text of apt-pocket
* Apply patch by Simon McVittie from bug #851568 (Closes: #851568)
* Improve man page for --setup-commands, as both examples are now supported
natively
* Use APT:Default-Release i.s.o. most pinning and add option
--apt-default-release
* Add --pin-packages option to enable Debian to run in testing with packages
from sid
[ Antonio Terceiro ]
* Simplify check for need to run setup commands
* Extract "add APT source" into its own method
* Add --add-apt-release option
-- Antonio Terceiro <email address hidden> Wed, 22 Nov 2017 20:12:39 -0200
-
autopkgtest (5.0.4) unstable; urgency=medium
* setup-commands/setup-testbed: also handle the case where resolv.conf is
*not* a symlink
* Bump Standards-Version to 4.1.1; no changes needed.
* debian/rules: reuse /usr/share/dpkg/pkg-info.mk instead of calling
dpkg-parsechangelog to get package version
-- Antonio Terceiro <email address hidden> Wed, 25 Oct 2017 22:42:22 -0200
-
autopkgtest (5.0.2) unstable; urgency=medium
* test: Adjust ChrootRunner tests for changed apt-get source invocation.
Commit 762397342b changed the invocation of `apt-get source` and
`dpkg-source -x`. Adjust ChrootRunner test mock commands accordingly.
-- Martin Pitt <email address hidden> Mon, 16 Oct 2017 11:53:55 +0200
-
autopkgtest (5.0.1) unstable; urgency=medium
[ Jiri Palecek ]
* qemu: Improve race condition with reading data after VM process ended.
Finish reading all data from stdin before checking the "running" flag,
to mitigate "tar: Unexpected EOF in archive in copyup()" race
conditions. (Closes: #829753, LP: #1384706)
[ Martin Pitt ]
* Use short package directory path for dsc and apt source.
Packages with long names can otherwise create too long paths for
sockets. Based on patch by Balint Reczey. (Closes: #860554)
* setup-commands/setup-testbed: Get along with resolv.conf symlink
debootstrap already copies the host's /etc/resolv.conf into the chroot,
but this does not help if that's a symlink. Copy the actual content
instead. Based on patch by SZALAY Attila. (Closes: #845925, LP: #1659541)
-- Martin Pitt <email address hidden> Sun, 08 Oct 2017 23:07:15 +0200
-
autopkgtest (5.0) unstable; urgency=medium
[ Martin Pitt ]
* Drop obsolete adt-* CLI
autopkgtest 4.0 with its "autopkgtest" program has been around for a
year, Debian's and Ubuntu's CI moved to that, and the Debian 9.0 release
is behind us. Drop "adt-run" and the corresponding adt-virt-* and
adt-build-* command line interfaces now.
Add Breaks: for debci for versions that still relied on adt-*.
* lxc, qemu, ssh: Shorten path of shared directory.
This helps to reduce socket path lengths in tests.
(See Debian #860554, LP: #1680577)
* Drop obsolete ubuntu-touch-session setup script.
This hasn't been maintained/tested for ages, and with the demise of
Ubuntu Touch this is now completely obsolete. (Closes: #835836)
* Avoid bare "except:" clauses
* tests/autopkgtest_args: pyflakes/pycodestyle fixes
* tests: Don't run LXC tests with --ephemeral.
It's not the default and ephemeral containers tend to fail to start too
often.
* tests/testpkg: Update Standards-Version and debhelper level.
Priority "extra" is deprecated, so move to "optional".
* README.package-tests.rst: Clarify role of control file, add simple
examples (Closes: #870654)
* README.package-tests.rst: Update Testsuite: documentation.
All supported Debian releases now have a new enough dpkg, and Ubuntu
14.04 will not get new tests any more. (Closes: #876008)
* Run apt-ftparchive for local debs on testbed instead of host.
This is slightly more correct as it will produce the format that the
testbed's apt expects (although that doesn't matter much). It also
allows autopkgtest to be run on non-Debian hosts.
As apt-utils is not essential, install it if necessary.
* README.package-tests.rst: Clarify Testsuite: values
`autopkgtest` is not any more the only defined value for Testsuite:, as
the paragraph below already explains.
* setup-commands/setup-testbed: Look at /etc/os-release for determining
distribution name. Stop hardcoding "debian|ubuntu|kali" and get this
information from os-release's ID field. (Closes: #868678)
* debian/rules: Drop obsolete pysupport override.
Not necessary any more since dh compat level 9.
* Bump Standards-Version to 4.1.0. (No changes necessary.)
[ Stéphane Graber ]
* debian/tests/lxd: Update to support LXD network/storage API
[ Steve Langasek ]
* Fix release name parsing with arch-qualified sources.list
(Closes: #870393)
[ Antonio Terceiro ]
* autopkgtest-build-lxc: Correctly clean cache for Debian containers
-- Martin Pitt <email address hidden> Sun, 17 Sep 2017 16:50:21 +0200
-
autopkgtest (4.4) unstable; urgency=medium
[ Martin Pitt ]
* doc/README.package-tests.rst: Document network access (Closes: #851556)
* qemu: Robustify ssh port locks.
Stop assuming that /run/lock is user-writable (it is not in non-Debian
systems). Instead create the lock file in /tmp and use 'x' to avoid
/tmp file races.
* tests/autopkgtest: Fix crashes when running on non-apt system
* Fix candidate version detection for packages containing regexp operators
'+' and '.' are valid characters in a Debian package name. Escape them
in the call to apt-cache policy so that we get what we want to know.
(Closes: #855954)
[ Iain Lane ]
* Fix build_source to work if "Package-List" is the last line in the apt
output (Closes: #851899)
* autopkgtest-virt-lxd: Check uptime for reboot waiting. (LP: #1654025)
* Add a debug-fail hook and implement it for autopkgtest-virt-ssh.
At the minute, this is mainly so that the nova script can have its
failure information (`nova console-log') propagated up to the output, so
that in the case of kernel panics or other random failures we get useful
output that the driver of autopkgtest (e.g. autopkgtest-cloud) can look
at. (LP: #1630578)
* autopkgtest-build-lxd: Allow overriding the target release by setting
RELEASE=. This will cause the container to be dist-upgraded to the new
release. Useful for the very early stages of a release when the LXD
images on images.linuxcontainers.org don't exist yet.
[ Barry Warsaw ]
* Pass Dpkg::Options::=--force-confnew to apt-get install.
This avoids dpkg from prompting for conffile installation when you always
want the new conffile in the testbed anyway. (Closes: #852475)
-- Martin Pitt <email address hidden> Sun, 30 Apr 2017 19:09:57 +0200
-
autopkgtest (4.3) unstable; urgency=medium
[ SZALAY Attila ]
* Respect --shell-on-failure on test dep install failure (Closes: #844255)
[ Barry Warsaw ]
* Use a test name that won't collide with my $HOME.
* Shorten the name in response to review
* testdesc.py: Feature: test-name=foobar added for better Test-Command names
(Closes: #839253)
* autopkgtest: Support --test-name and deprecate --testname
[ Paul Gevers ]
* tests: Use valid Debian architecture in ChrootRunner tests
(Closes: #849676)
-- Martin Pitt <email address hidden> Wed, 11 Jan 2017 12:34:09 +0100
-
autopkgtest (4.2.2) unstable; urgency=medium
* tests/adt-run: Adjust expected cpu_model in
NullRunner.test_tree_output_dir()
* autopkgtest-buildvm-ubuntu-cloud: Run setup script with -x in verbose
mode. This provides more useful information when updating/adjusting
setup-testbed.
* setup-commands/setup-testbed: Run all apt operations with
DEBIAN_FRONTEND=noninteractive.
-- Martin Pitt <email address hidden> Tue, 29 Nov 2016 09:11:05 +0100
-
autopkgtest (4.2.1) unstable; urgency=medium
* Fix trailing '\' in test command with ssh runner
* ssh: Filter out trailing spaces from commands in auxverb
* Apply patches for tests with unbuilt-tree (Closes: #844454)
* setup-commands/setup-testbed: Install dpkg-dev
* Fix stray ')' in --apt-pocket handling
* Adjust expected cpu_model in NullRunner.test_tree_output_dir()
* PEP-8 fixes
* Robustify tests against kernel versions with trailing space
-- Martin Pitt <email address hidden> Wed, 23 Nov 2016 22:49:59 +0100
-
autopkgtest (4.2) unstable; urgency=medium
[ Martin Pitt ]
* ssh: Fix result of tests that break the testbed. (LP: #1630578)
* qemu: Fix user/password login mode without a ttyS1 root shell.
- Concatenate bytes with each other, not a str to a byte.
- Sync/flush console after sending password and ttyS1 shell command, wait
until login is complete before continuing.
- Send password to sudo for ttyS1 shell command, to also work with
password-requiring sudo. (LP: #1630963)
* qemu: Fix reboot in user/password login mode.
* ssh: Add --capability option.
This is useful to run tests which require an isolation level or have
breaks-testbed without a setup script.
* autopkgtest-build-lxd: Ask "lxc profile" for default bridge instead of
/etc/default/lxd-bridge. The latter went away in recent LXD versions, and
"lxc profile show default" also works in earlier versions.
* Make --apt-upgrade consider a "404" error as test failure.
Previously all errors from "apt-get update" were considered temporary
failures, i. e. the setup command always exited with 1. But if we specify
e. g. a nonexisting release from a distro or a PPA, this won't just go
away by itself -- we want the test to actually fail instead of getting
stuck in an eternal "retry on temporary failures" loop.
* schroot: Don't fail on stderr of schroot as long as it succeeds.
(LP: #1637898)
* qemu: Hide detected udev file system properties on /dev/baseimage.
(Closes: #842299)
[ Simon McVittie ]
* VirtSubproc: open arbitrary files in binary mode.
* VirtSubproc: if check_exec status is nonzero, include stderr in message.
* qemu: put the shared directory in /run. If the virtual machine's root
filesystem is read-only, we won't be able to create /autopkgtest.
* qemu: Move eofcat into /tmp. This avoids having to write it to /bin, which
might be read-only. Re-create eofcat on every boot for this.
* source_rules_command: log the result we got if it is not as expected
(Closes: #842302)
* Add 'needs-reboot' restriction. This allows tests to be explicit about
needing to reboot the machine, rather than assuming that
'isolation-machine' is enough. It is plumbed into the existing 'reboot'
capability, which is distinct from 'isolation-machine'.
(Closes: #842300)
* Add --setup-commands-boot for commands that must be run at every boot.
This can be used for doing "mount -o remount,rw /" before any dpkg
operation, or transient setup like writing files into /run/.
(Closes: #842091)
-- Martin Pitt <email address hidden> Tue, 01 Nov 2016 23:12:55 +0200
-
autopkgtest (4.1) unstable; urgency=medium
[ Martin Pitt ]
* ssh-setup/nova: Move to python3 and to current -novaclient API
* schroot: Bump end-session timeout to 5 minutes.
30 seconds might not be enough when running big schroots on slow disks.
* ssh-setup/nova: Add --nova-reboot option.
In some clouds using "nova reboot --poll" waits several minutes until
after the machine is actually up again. OTOH a simple "reboot" inside some
other clouds causes network to break after "reboot". As there is no method
that works everywhere, default to the autopkgtest-virt-ssh behaviour again
("reboot" and wait for ssh), and add an option to use "nova reboot"
instead.
[ Stéphane Graber ]
* debian/tests/lxd: Update bridge setup to work with LXD 2.3 and higher.
This moves from /etc/default/lxd-bridge to lxd-internal configuration.
[ Barry Warsaw ]
* Support url#refspec format.
Fix the bug in the previously supported url#branch syntax, where the code
expected a space separator but the documentation described the # separator.
Generalize the approach with an explicit fetch/checkout so that GitHub style PR
refspecs like "refs/pull/21/head" also work as branch name.
(Closes: #839072)
-- Martin Pitt <email address hidden> Sat, 01 Oct 2016 10:55:16 +0200
-
autopkgtest (4.0.5) unstable; urgency=medium
* setup-commands/setup-testbed: Don't configure ifupdown when using
networkd, as done by latest vmdebootstrap.
* autopkgtest-chroot.1: Fix typo
* Drop broken and unmaintained ssh-setup/snappy setup script.
This hasn't ever been used in production and stopped working long ago.
* Run tests/autopkgtest_args during package build
* Put virt servers back into $PATH.
The virt servers were originally intended to be public API (even though not
documented as such) and other packages might provide virt servers. Put them
back into /usr/bin, with an "autopkgtest-virt-" prefix to mirror the original
"adt-virt-" naming. Rename the manpages to match the binaries.
(Closes: #835204)
* tests/autopkgtest: Relax checks for testpkg.deb from local repository
apt 1.3 changes the format, so be less picky about it.
* Fix "apt-get source" version detection for single-line "Package-List:"
-- Martin Pitt <email address hidden> Mon, 29 Aug 2016 08:35:00 +0200
-
autopkgtest (4.0.4) unstable; urgency=medium
[ Antonio Terceiro ]
* autopkgtest-build-lxc: Add new optional argument for a customization script
[ Martin Pitt ]
* Add /usr/bin/adt-virt-* backwards compatibility symlinks (Closes: #833407)
* Add pyflakes3 build dependency to run pyflakes test at build time
(Closes: #833502)
* tools/autopkgtest-build-lxd: Drop running poweroff before "lxc stop"
[ Ondřej Nový ]
* Prefer pycodestyle over pep8 (Closes: #834076)
-- Martin Pitt <email address hidden> Fri, 12 Aug 2016 11:07:10 +0200
-
autopkgtest (4.0.3) unstable; urgency=medium
[ Christian Kastner ]
* autopkgtest.1: Replace remaining "---" with "--" (Closes: #831035)
[ Martin Pitt ]
* Fix UnicodeDecodeError on invalid UTF-8 characters in debian/changelog with a built tree
* qemu: Add new --timeout-reboot option.
Lower default timeout from 5 to 1 minute.
* setup-commands/setup-testbed: Add systemd unit for ttyS1 root shell.
* setup-commands/setup-testbed: Ignore I/O errors on ttyS1 in autopkgtest.service.
* tools/autopkgtest-build-lxd: Run poweroff before "lxc stop"
This works around hanging containers when a container has systemd >= 231-1 but
the host LXC does not yet have <https://github.com/lxc/lxc/pull/1086>.
-- Martin Pitt <email address hidden> Tue, 02 Aug 2016 09:30:29 +0200
-
autopkgtest (4.0.2) unstable; urgency=medium
* If --setup-commands exits with code 100, consider this as a bad package
(autopkgtest exit code 12) instead of a transient testbed failure (exit
code 16). This allows setup commands to detect errors which should be
attributed to the tested package itself (like dist-upgrading to the new
version). Change standard "apt-get update" setup commands to exit with
code 1 to continue treating that as a temporary failure.
* setup-commands/setup-testbed: Remove ubuntu-core-launcher and
snap-confine.
* Fix some leftover "adt" → "autopkgtest" in manpages.
* debian/tests/lxd: Move from adt-build-lxd to autopkgtest-build-lxd.
* ssh-setup/nova: Use "autopkgtest*" instance name instead of "adt*".
* Rename temporary "adt-satdep" package to "autopkgtest-satdep".
* autopkgtest.1: Point out that if a .changes contains only debs, a
corresponding .dsc must still be provided on the command line.
(Closes: #828025)
* autopkgtest.1: Document that if no source is given on the command line,
the current directory will be tested.
* debian/tests/installed: Fall back to old $ADT_TMP if $AUTOPKGTEST_TMP is
not set, to work in debci (which runs an older autopkgtest).
* Disable SchrootClickRunner.test_setup_ubuntu_touch_session for now, it
breaks schroots and needs to move into a container.
-- Martin Pitt <email address hidden> Fri, 01 Jul 2016 20:19:58 +0200
-
autopkgtest (4.0.1) unstable; urgency=medium
* Skip tests/autopkgtest NullRunner.test_apt_source_nonexisting test instead
of failing if there are no deb-src apt sources configured on the host.
* Add test for correctly parsing version number with less common characters.
* autopkgtest: If the test argument is a legal apt source name, prefer
testing that apt source name over testing that directory. If the latter
is wanted, it can always be prefixed with ./ to disambiguate. Update the
manpage accordingly.
* autopkgtest.1: Update separator. (LP: #1591179)
* Fix "apt-get source" version detection for source packages whose versions
in different pockets have disjoint sets of binary packages (like Ubuntu's
linux-raspi2).
* ssh-setup/nova: If the normal "nova reboot" does not finish after five
minutes, use the bigger "reboot --hard" hammer. This works around reboot
bugs on some architectures.
* Fix "apt-get source" version detection for old (Ubuntu precise) apts which
does not yet understand --only-source, by ignoring other sources in awk.
-- Martin Pitt <email address hidden> Fri, 17 Jun 2016 12:08:55 +0300
-
autopkgtest (4.0) unstable; urgency=medium
* Add new "autopkgtest" CLI. This provides a simplified CLI compared to the
now deprecated adt-run:
- It accepts only exactly one tested source package, and gives a proper
error if none or more than one (often unintend) is given
- It defaults to the current directory if that is a Debian source package
- The order of arguments is not relevant any more
- Built vs. unbuilt tree is now automatically detected
- The explicit --source, --click-source etc. options are gone, the type of
tested source/binary packages is detected automatically
- The virtualization server is now separated with a double instead of a
tripe dash, as the former is standard Unix syntax.
- The virtualization server must be specified with its "short" name only,
e. g. "ssh" instead of "adt-virt-ssh".
The old "adt-run" CLI will still be available for some time.
(Closes: #795274, LP: #1453509)
* Rename adt-build* tools to autopkgtest-build* and build images prefixed
with"autopkgtest" instead of "adt". Keep compatibility symlink for the old
commands, and when being called through them, also produce images with the
old adt* names.
* Rename public ADT_* env vars to AUTOPKGTEST_*:
- AUTOPKGTEST_APT_PROXY
- AUTOPKGTEST_ARTIFACTS
- AUTOPKGTEST_AUTOPILOT_MODULE
- AUTOPKGTEST_NORMAL_USER
- AUTOPKGTEST_REBOOT_MARK
- AUTOPKGTEST_TMP
As these are being used in existing tests and tools, also export/check
those under their old ADT_* name.
-- Martin Pitt <email address hidden> Wed, 08 Jun 2016 10:13:01 +0200
-
autopkgtest (3.20.9) unstable; urgency=medium
* Fix "apt-get source" version detection for very old source packages that
don't have "Package-List:" yet. (LP: #1588199)
* Skip NullRunner.test_apt_source_nonexisting test instead of failing if
there are no deb-src apt sources configured on the host.
-- Martin Pitt <email address hidden> Thu, 02 Jun 2016 22:22:45 +0200
-
autopkgtest (3.20.8) unstable; urgency=medium
* adt-build-lxd: Fix "ADT_APT_PROXY: parameter not set" failure if host's
apt proxy is not on localhost.
* debian/tests/lxd: Set up LXD bridge, so that the test can actually work
with current LXD.
* Set $ADT_NORMAL_USER during tests that run as root.
* Re-enable lxd autopkgtest, now that LP: #1557161 is fixed.
* debian/tests/lxd: Enable MSS clamping, to work around broken PTMU in
Canonical's Scalingstack: Avoids lost IP packets due to MTU mismatches.
* adt-build-lx{c,d}: Pass on $MIRROR to setup-testbed.
* adt-virt-qemu: Replace deprecated -redir QEMU option with
"-net user,hostfwd=".
* adt-buildvm-ubuntu-cloud: Provide more user friedly error if no image
exists for the chosen release/architecture. (LP: #1586322)
* Put back apt-cache showsrc --only-source option, as otherwise we'll catch
binaries from unrelated sources. Add a fallback for Ubuntu 12.04 to re-try
without --only-source.
-- Martin Pitt <email address hidden> Wed, 01 Jun 2016 12:39:50 +0200
-
autopkgtest (3.20.7) unstable; urgency=medium
* Use "gdk-pixbuf" as example package in tests and documentation instead of
libpng. The latter recently got renamed.
* setup-commands/setup-testbed: Don't install haveged into containers.
* tests/adt-run: Make SchrootClickRunner tests work with a standard schroot
(i. e. no click and SDK preinstalled), by installing the packages via
--setup-command.
* tools/adt-buildvm-ubuntu-cloud: Adjust to new cloud image names from
Ubuntu 16.10.
* Exit with 12 ("bad package") instead of 16 ("temporary testbed failure")
when --apt-source package does not exist.
* Move installed python modules from /usr/share/autopkgtest/python to
../lib, to use the same name as in the source tree.
* setup-commands/setup-testbed: Call all apt-get commands with /dev/null
stdin, to avoid them seizing stdin. Fixes adt-build-lxc for Ubuntu trusty.
-- Martin Pitt <email address hidden> Thu, 26 May 2016 21:03:07 +0200
-
autopkgtest (3.20.6) unstable; urgency=medium
* Fix OSError when running a shell is requested but /dev/tty does not exist;
just log an error instead.
* Fix parsing of candidate versions from "apt-cache policy" to always use
the precise given package name. By default it falls back to a
substring/regexp search (undocumented).
* adt-build-lxd: Check the LXD configuration for the LXD bridge instead of
the old LXC bridge, for apt proxy auto-detection. (LP: #1577968)
* Generalize the apt proxy detection in adt-build* and setup-testbed to
work for arbitrary proxies, not just apt-cacher-ng. (LP: #1577966)
* Eliminate the need to set $AUTOPKGTEST_BASE to execute runner/adt-run from
a git checkout. This also makes ./run-from-checkout obsolete, call
runner/adt-run directly.
-- Martin Pitt <email address hidden> Tue, 17 May 2016 22:32:46 +0200
-
autopkgtest (3.20.5) unstable; urgency=medium
[ Martin Packman ]
* Fix ssh virt server example and testbed error.
[ Martin Pitt ]
* If git clone fails with "--git-source" the first time, retry after 15
seconds. This should defend short temporary network glitches.
(LP: #1571979)
* adt-virt-qemu: Call eofcat helper with PYTHONHASHSEED=0 to avoid long
hangs after booting the VM until the RNG gets initialized. (See #822431
for details) (Closes: #821778)
* adt-virt-ssh: Fix UnboundLocalError crash when logging in as root.
* Fix running for multiple actions in one command line: (Closes: #822285)
- Close the summary stream after the last test, not after the first.
- Clean up the test tree on the testbed between actions.
* Fix NullRunner.test_timeout_no_output to work with multiple parallel runs.
(Closes: #816398)
-- Martin Pitt <email address hidden> Mon, 25 Apr 2016 00:14:05 +0200
-
autopkgtest (3.20.4) unstable; urgency=medium
* setup-commands/setup-testbed: Fix kernel header installation for
precise/armhf, which does not yet have linux-headers-generic.
* Use "nproc" to determine the number of processors available, which is both
more correct in a cgroup world, and also simpler.
* Add new --build-parallel=N option to explicitly set the "parallel=N"
$DEB_BUILD_OPTION for building packages, to override the default of
"number of available CPUs". This is mostly useful in containers where you
can restrict the available RAM, but not restrict the number of CPUs.
(LP: #1569750)
* setup-commands/setup-testbed: ubuntu-snappy got renamed to snapd, adjust
package name.
* adt-build-lxd: Set "distribution", "release", and "architecture"
properties of generated images.
* adt-build-lxd: Clean up all old images of the same distro/release/arch,
not just the previous one. Also fix cleanup to work in non-English
locales.
* setup-commands/setup-testbed: Call apt-get purge only once with the list
of all packages, instead of once per package. This is much faster.
* SchrootClickRunner tests: Chown click dir in /opt after creating the user.
* Bump Standards-Version to 3.9.8 (no changes necessary).
* Update Vcs-* URLs.
-- Martin Pitt <email address hidden> Mon, 18 Apr 2016 11:19:45 +0200
-
autopkgtest (3.20.3) unstable; urgency=medium
* Makefile: Install SKELETON after the programs (which use an [a-z] glob),
as the latter behaves differently in different locales. Thanks Alexis
Bienvenüe! (Closes: #820148)
* adt-buildvm-ubuntu-cloud: Use https for cloud image download.
(LP: #1566846)
* setup-commands/setup-testbed: Purge ubuntu-snappy.
* adt-virt-qemu: On AMD CPUs, default to -cpu host instead of
"kvm64,+svm,+lahf_lm". This introduces more jitter, but is the only -cpu
mode that actually allows nested QEMU with current QEMU versions.
* adt-build-lxd: Force-delete preparation container at the end, even if it
is running.
* adt-build-lxd: Disable apt proxy configuration with ADT_APT_PROXY=="none".
-- Martin Pitt <email address hidden> Mon, 11 Apr 2016 16:27:09 +0200
-
autopkgtest (3.20.2) unstable; urgency=medium
* setup-commands/setup-testbed: Purge lxc-common for testbed preparation.
* adt-buildvm-ubuntu-cloud: Use the same code for determining the default
qemu-system-* command as adt-virt-qemu. This adds support for ppc64el and
other architectures. (Closes: #818892)
* adt-buildvm-ubuntu-cloud: If ifnames was disabled for the initial boot,
keep it disabled for subsequent boots instead of changing to ens3. This
fixes building images for Ubuntu 15.04.
* lib/VirtSubproc.py, cmd_reboot(): Drop workaround for dhclient hanging on
reboot, LP #1556175 got fixed.
* setup-commands/setup-testbed: Ensure that purging packages does not hang
eternally on debconf prompts.
* setup-commands/setup-testbed: Drop purging of xkb-data.
* setup-commands/setup-testbed: Apply "vmalloc=512M" grub change also when
using as a --setup-commands with adt-run, not only with building images.
Fixes tests like udisks2 on i386 when using standard cloud images.
-- Martin Pitt <email address hidden> Tue, 05 Apr 2016 14:53:01 +0200
-
autopkgtest (3.20.1) unstable; urgency=medium
* When testing click packages, don't regenerate all AppArmor profiles if
/var/cache/apparmor/click-ap.rules already exists. That way the profiles
can be pre-adjusted once in a testbed instead of once for each test run,
which greatly speeds up iterations. (LP: #1553797)
* Move SshRunner* tests from lxc to lxd.
* NullRunner.test_tree_output_dir test: Only check for cpu_{model,flags} on
x86 and ARM, as these need parsing adjustments on other architectures.
* Disable lxd autopkgtest for now, this still needs some way to set a proxy.
* lib/VirtSubproc.py, cmd_reboot(): Add workaround for dhclient hanging on
reboot (see LP #1556175).
* Fix regular expression for removing profile guarded dependencies on hosts
that don't support build profiles.
* adt-virt-lxc: Suppress lxc-copy's stdout in the "no btrfs" fallback case.
(Closes: #818185)
-- Martin Pitt <email address hidden> Mon, 14 Mar 2016 22:35:54 +0100
-
autopkgtest (3.20) unstable; urgency=medium
New features/behaviour changes:
[Martin Pitt]
* adt-virt-lxd: Launch containers in ephemeral mode.
* adt-virt-lxc: Use the new lxc-copy if available, as lxc-clone and
lxc-start-ephemeral got deprecated by that. This now supports reboots in
ephemeral mode.
* adt-virt-lxc: Add --name option. This allows CI systems to use a more
expressive name than the autogenerated adt-virt-lxc-XXXXXX, to make it
easier to map a container to a running test.
* Add CPU information to testinfo.json: "nproc" (#cpus), "cpu_model", and
"cpu_flags". (LP: #1552129)
* Add autopkgtest for adt-build-lxd and the lxd runner.
[ Christian Seiler ]
* Support nested KVM by default by emulating a CPU with VMX/SVM support on
x86_64. (Closes: #800845, part 1)
* adt-virt-qemu: Provide read-only version of the VM image to the test as
/dev/baseimage, for tests that want to run nested QEMU. (Closes: #800845)
Bug fixes:
[ Martin Pitt ]
* setup-commands/setup-testbed: Ensure that removing cruft does not remove
cloud-init. (LP: #1539126)
* setup-commands/setup-testbed: Purge lxd and lxc.
* adt-virt-lxc: Don't fail on deprecation warnings of lxc-clone and
lxc-start-ephemeral. (LP: #1549995)
* Run external commands with /dev/null as stdin. This has always been
intended, but has not actually been done for a while.
* Drop support for hook_forked_inchild() in virt-runners. This has never
been used.
* ssh-setup/nova: Try and prefer novaclient.v2 API first, and fall back to
v1_1. (LP: #1552730)
* Correctly ignore positive and negative build profiles with too old
libdpkg-perl that does not support them yet.
* tests/run-parallel: Don't run NullRunner and SchrootRunner tests in
parallel, as they collide with a bind-mounted /tmp.
* test_reboot_prepare testcase: Don't compare the host and guest kernel
versions in the QemuRunner.
* Keep and export $ADTTMP and $ADT_ARTIFACTS in debug shells.
(Closes: #814115)
* setup-commands/*: Add shebang headers to quiesce lintian.
* Bump Standards-Version to 3.9.7 (no changes necessary).
* Add debian/source/format (3.0 native).
* debian/control: Use https Vcs-* links.
* Bump debhelper compat level to 9.
* adt-virt-qemu: Don't assert result of "runlevel" for connection test. This
is a race condition under systemd as getty starts before default.target
is fully finished.
* tests/adt-run SchrootClickRunner: Ensure that the "click" system user
exists in the schroot, so that it doesn't need to exist on the host.
* Adjust SchrootRunner.test_apt_pocket_pkg_with_proposed_dep test case for
apt 1.1.
* Latest LXD now adds an "images" remote for images.linuxcontainers.org by
default. Adjust adt-build-lxd.1 and adt-virt-lxd.1 accordingly.
* Respect $TMPDIR when creating the downtmp and some other directory/files.
(Closes: #817190)
* tests/adt-run: Symlink real ~/.config/lxc into the temporary $HOME, to
avoid regenerating the LXD client certificate for each test.
[ Christian Seiler ]
* setup-testbed: reduce grub timeout on images that don't already configure
this in /etc/default/grub.d (like vmdeboostrap).
* adt-virt-qemu: Use correct qemu-system-i386 command on i[3456]86 systems.
* Fix spelling errors in manpages.
-- Martin Pitt <email address hidden> Fri, 11 Mar 2016 10:05:08 +0100
-
autopkgtest (3.19.3) unstable; urgency=medium
* setup-commands/setup-testbed: Avoid dpkg conffile prompts.
* adt-virt-lxc: Call lxc-stop and lxc-destroy with --quiet, to fix breakage
due to unexpected output with LXC 2.0.
* adt-virt-lxc: Redirect lxc-destroy stdout, to work around LP #1543016.
* Ignore build profiles on too old libdpkg-perl versions also when building
the tested package.
* adt-virt-lxd.1: Standard images from linuxcontainers.org stopped having
"deb-src" apt lines by default. Document that standard setup commands are
required for this and adjust examples accordingly.
* adt-virt-lxc: Factorize cleanup code.
* adt-virt-lxc: Run lxc-{start,stop} under "timeout" when running through
sudo, as killing these on timeout does not work.
* ssh-setup/nova: Wait until instance is actually ready before sending
access info.
* ssh-setup/nova: Show instance's console log on ssh or cloud-init timeouts,
as that's very useful for debugging.
* adt-virt-lxd: Drop redundant "lxc stop", just call "lxc delete --force".
* adt-buildvm-ubuntu-cloud: Bump default image size from 4 to 20 GB.
* runner/adt-run: Install ca-certificates along with git, to ensure that
https URLs can be cloned.
* tools/adt-build-lxd: Add workaround for broken "lxc file push" permissions
(LP: #1548878)
-- Martin Pitt <email address hidden> Tue, 23 Feb 2016 17:56:45 +0100
-
autopkgtest (3.19.2) unstable; urgency=medium
* Fix "apt-get source" version detection:
- Ignore source record "Binary:" entries which are not actually binaries
of that source.
- Take the highest source version of all encountered binaries. In other
words, as soon as apt pinning uses one package from -proposed, use the
tests from -proposed too.
- Only consider binaries which exist in all releases. This avoids newly
introduced binaries (library transitions, new kernel versions) to skew
the intended apt pinning as they would always win the "highest version"
check from above.
* Install /usr/share/autopkgtest/setup-commands/* scripts as executable, to
make them work for vmdebootstrap --customize. (Closes: #810862)
* ssh-setup/nova: Use extended RE for matching --image pattern.
* setup-commands/setup-testbed: Fix handling of options in sources.list.
* tools/adt-build-lxd: Fix parsing of release name from apt sources with
options if lsb_release is not available.
* setup-commands/setup-testbed: Regenerate initramfs when adding udev rule
for disabling ifnames (for chroots).
* adt-buildvm-ubuntu-cloud: Drop duplicate sed of cloud-init.prerm.
* adt-buildvm-ubuntu-cloud: Don't try to run "None" if --post-command is not
given.
* adt-virt-lxc: Add timeouts to all LXC operations.
* Fix chowning for "rw-build-tree" restriction: run it as root if available,
and otherwise ignore it entirely. (LP: #1535234)
* Drop apt-cache showsrc --only-source option, as this is not yet understood
by Ubuntu 12.04's apt.
* VirtSubproc.py, execute_timeout(): Avoid UnicodeDecodeErrors when called
programs send gibberish. Decode manually with "replace" error mode
instead. (LP: #1535741)
* adt-virt-lxc: Avoid unnecessary reading and decoding of program outputs if
we don't actually use it.
* ssh-setup/nova: Use the image with the latest "created" time, instead of
the last lexicographic name.
-- Martin Pitt <email address hidden> Thu, 21 Jan 2016 13:30:40 +0100
-
autopkgtest (3.19.1) unstable; urgency=medium
* adt-virt-qemu: If the executed command exits with 255, translate that to
253 in the auxverb wrapper, as 255 is the exit code for failures of the
auxverb itself. This avoids considering ordinary test failures as
temporary testbed failures. This makes the QEMU runner behave the same way
as the container ones.
* tests/adt-run: Factorize common tests into superclasses.
* doc/README.package-tests.rst: Point out that "Test-Command:" is also
useful for running the same test script under different interpreters or
different dependencies. (Closes: #809442)
* Set summary_stream to None after closing it, to avoid trying to write
late error messages from cleanup into it.
* Gracefully handle failure to kill a timed out process.
* ssh-setup/nova: Use image UUID instead of its name for "nova boot". This
avoids failures if multiple images have the same name. (LP: #1524216)
* adt-build-{lxc,lxd}: Run testbed setup scripts also if they are not
executable. Thanks Antonio Terceiro! (Closes: #809917)
* setup-commands/setup-testbed: Run apt-get autoremove when builing images.
* setup-commands/setup-testbed: Handle options in sources.list. Thanks
Antonio Terceiro!
* tools/adt-build-lxd: Fix error message if apt does not have a proxy set.
* setup-commands/setup-testbed: Install linux-headers-generic if there is no
kernel (for containers), to make DKMS tests work when not being triggered
by a kernel. (LP: #1531488)
* tools/adt-build-lxc: Fix removal of LXC caches on btrfs.
* tools/adt-build-lxc: Use "-B best" for lxc-create, for better performance
on btrfs or LVM.
* tools/adt-build-lxc: Fix hostname for updating containers to not end in
".new".
* adt-virt-lxc: Opportunistically try lxc-clone with "-B btrfs", and fall
back to default backing store if it fails. lxc-clone should do this by
itself, but currently doesn't (LP #1532125).
* adt-virt-lxc: Don't fail on stderr of lxc-start, it sometimes prints
warnings.
* When using --apt-source with --apt-pocket= with an explicit package list,
let apt-get source download the source version that matches the pinning.
This avoids running tests from -proposed against packages in -release.
(LP: #1517426)
* setup-commands/setup-testbed: Don't purge perl and python2.7. This works
in sid and xenial, but is too greedy for older releases.
-- Martin Pitt <email address hidden> Tue, 12 Jan 2016 09:23:16 +0100
-
autopkgtest (3.19) unstable; urgency=medium
New features/behaviour changes:
* Add adt-virt-lxd runner for LXD. (LP: #1519677)
* Add adt-build-lxd tool for building or updating an LXD image with
standard autopkgtest customizations applied. This is similar to
adt-build-lxc.
* Unify test bed setup scripts for VMs (adt-setup-vm), containers (in
adt-build-lxc) and cloud (setup-commands/cloud-vm-setup) into a common
script setup-commands/setup-testbed. This will work both for image
building (VM, cloud, LXC, LXD) and as --setup-commands (in which case some
actions are skipped).
* setup-commands/setup-testbed: Clean up many more packages. Only do this
when building an image, to avoid accidentally destroying testbeds which
are not minimal autopkgtest ones.
* Make --env apply to package builds too. With that you can e. g. set
DEB_BUILD_OPTIONS.
* Add new action type --git-source which installs git (unless already
present), checks out a remote branch, and then behaves like
--unbuilt-tree.
* adt-virt-lxc.1: Mention adt-build-lxc in "Requirements".
Bug fixes:
* If apt-get fails when installing test dependencies and apt
pinning is in use, also retry without pinning. This was already done in
the case of apt-get succeeding but removing our "satdep" dummy package
(the common case), but this does not cover upgrades of Priority: >=
important packages which make apt-get exit with non-zero.
* Set $TERM in testbed to the host's value when starting an interactive
shell in the testbed. This fixes broken shells with the LXC/LXD runners.
-- Martin Pitt <email address hidden> Thu, 17 Dec 2015 16:45:54 +0100
-
autopkgtest (3.18.2) unstable; urgency=medium
[ Martin Pitt ]
* tools/adt-build-lxc: Install libpam-systemd; some tests expect to have an
$XDG_RUNTIME_DIR.
* Fix --apt-pocket=proposed=pkgname.. to set up the apt pinning before
running setup-commands (in particular, dist-upgrade), as otherwise the
dist-ugprade will install package versions that conflict with the pinning.
Change --apt-pocket to download (only) the apt indexes for the given
pocket, so that we can set up the pinning correctly.
* ssh-setup-nova: Separately track server UUID, to avoid resetting the
originally given --name on testbed revert.
* If apt-get fails for --apt-pocket ("Hash sum mismatch"!), retry up to
three times.
* Fix parsing of "apt-cache showsrc" to not get broken by wrapped lines.
Thanks Andy Whitcroft! (LP: #1522469)
* Don't try to "cd ." on testbeds in source rules commands, as this might be
inaccessible in some cases. Default to '/' instead. Thanks Christopher
Baine!
* ssh-setup/nova: Treat --image value as a regexp pattern and use the
greatest (by string sorting) result. This avoids having to put date stamps
into the command line, and also avoids completely falling over if two
images have the same name.
* Add a new ssh setup script command "debug-failure" which is called when
the setup script fails with nonzero or on timeouts waiting for ssh or
reboot.
* ssh-setup/nova: Implement "debug-failure" command with "nova console-log".
* tools/adt-build-lxc: Only install libpam-systemd if that exists (e. g. not
on Ubuntu 12.04).
* setup-commands/cloud-vm-setup: Don't rm the /etc/cron.daily/apt conffile
to avoid breaking apt upgrades. Instead, create
/etc/apt/apt.conf.d/02periodic.
* Create a testinfo.json for "badpkg" and other exit codes as well.
* Set stdin to /dev/null when running commands in the testbed. This avoids
hanging tests on interactive questions and also fixes auxverbs which check
if stdin is a PTY (like "lxc exec").
* tests/testarchive.py: Don't include the "Release" file into itself.
* Fix SchrootRunner.test_apt_pocket_* test cases to include "Sources" into
Release file. This makes the tests work with apt 1.1.
[ Max Brustkern ]
* adt-buildvm-ubuntu-cloud: Add timeout option.
[ Antonio Terceiro ]
* adt-build-lxc: Don't hardcode bridge interface.
-- Martin Pitt <email address hidden> Wed, 09 Dec 2015 12:38:13 +0100
-
autopkgtest (3.18.1) unstable; urgency=medium
* With --apt-pocket=POCKET=pkgname,... also include <release>-updates.
* cloud-vm-setup, adt-setup-vm: Disable /etc/cron.daily/apt.
* Detect if apt fails to download packages (as opposed to installing them),
retry up to three times, and eventually fail with exit code 16. This
avoids failing tests due to DNS/infrastructure problems and handling them
as tmpfails instead.
* Add test case for multiple Tests: with --apt-pocket=proposed=pkg
selection and nonexisting dependency.
* Properly keep track of apt pinnings across testbed resets.
* cloud-vm-setup, adt-setup-vm: Purge open-iscsi.
* Treat apt errors (exit code 100) from source download/extraction as
tmpfail.
* ssh-setup/nova: Stop adding apt sources for restricted/multiverse, as
current images now have them by default (see LP #1177432). This avoids
duplicate apt sources which cause stderr failure with some tests.
* Recognize negative architecture restrictions in test Depends:.
(LP: #1516959)
* tools/adt-buildvm-ubuntu-cloud: Counter-hack LP #1510345 harder by
checking /proc/cmdline instead of /etc/default/grub.
-- Martin Pitt <email address hidden> Wed, 18 Nov 2015 12:18:23 +0100
-
autopkgtest (3.18) unstable; urgency=medium
Behaviour changes/improvements:
* adt-virt-lxc: Drop --eatmydata option. Conceptually this isn't specific to
the LXC runner, it should always be used for package installation (when
available) with all runners, but never for tests.
* setup-commands/cloud-vm-setup, tools/adt-setup-vm: Install and use
eatmydata.
* Use eatmydata for --apt-upgrade and installing test dependencies, if
available.
* ssh-setup/nova: Provide custom implementation of "wait-reboot" using "nova
reboot --poll". This works more reliably on some clouds.
* ssh-setup/nova: Call "nova boot" with --debug to better be able to
diagnose failures.
* Extend --apt-pocket=POCKET option to accept an additional
"=pkgname1,src:srcname1,..." package list. An entry "src:srcname" expands
to all binary packages built by that source. If given, set up apt pinning
to use only those packages from POCKET, so that package updates in that
pocket can be tested independently from each other for better isolation.
(LP: #1503150)
* Add ssh-setup/maas: Acquire and Deploy a machine via MAAS to use as an
autopkgtest testbed. It assumes that MaaS is already set up, machines are
commissioned to it, and you added your ssh key to it.
Bug fixes:
* ssh-setup/nova: Drop "Warning: PoC", we've been using this in production
for a long time.
* tools/adt-setup-vm: Check if we already have a configuration for the
specific network interface that we are configuring, not just any
interface.
* tools/adt-buildvm-ubuntu-cloud: Counter-hack the Ubuntu livecd-rootfs
workaround for LP #1510345 by creating a configuration for ens3 and
removing the one for eth0.
-- Martin Pitt <email address hidden> Wed, 11 Nov 2015 10:11:48 +0100
-
autopkgtest (3.17.4) unstable; urgency=medium
* Fix --apt-pocket for apt sources with [options].
* Add tests/testarchive.py module for creating dynamic archives of mock
debs, and add a full integration test for --apt-pocket.
* Fix version in adt-run output (@version@ moved to adt_testbed.py).
* adt-setup-vm, cloud-vm-setup: Purge lxc/lxd.
* tests/testdesc: Skip Debian.test_builddeps_profiles test if dpkg is too
old to support build profiles.
-- Martin Pitt <email address hidden> Wed, 21 Oct 2015 07:33:04 +0200
-
autopkgtest (3.17.3) unstable; urgency=medium
* Set DEB_BUILD_OPTIONS=parallel=<#cpu> for builds and tests (as they
sometimes build packages). (LP: #1399177)
* If copying up files/artifacts through shared dir fails because of
inaccessible files, fall back to piping them through the auxverb.
* adt-build-lxc: Install dbus; a lot of software indirectly expects it
(e. g. calling systemctl as user).
* tools/adt-setup-vm, setup-commands/cloud-vm-setup: Purge
libcpan-changes-perl, it breaks some Perl autopkgtests.
* tools/adt-setup-vm, setup-commands/cloud-vm-setup: Purge git, it breaks
Ruby's autopkgtests.
* NullRunner.test_tmp_install: Explicitly require Json 1.0 GI version, to
silence warning with current pygobject.
-- Martin Pitt <email address hidden> Tue, 06 Oct 2015 08:13:09 +0200
-
autopkgtest (3.17.2) unstable; urgency=medium
* ssh-setup/nova: Use instance UUIDs instead of names after initial "nova
boot", to avoid name collisions. (LP: #1495788)
* adt-setup-vm: Drop "pin eth0 name" hack, this was fixed properly in
systemd 226-2.
* adt-setup-vm: Generalize ethernet ifupdown setup for net.ifnames.
* adt_binaries.py: Fix resetting of testbed (regression in 3.17).
-- Martin Pitt <email address hidden> Sun, 20 Sep 2015 17:23:41 +0200
-
autopkgtest (3.17.1) unstable; urgency=medium
* Add new private python modules to Makefile, to actually ship them.
* tests/adt-run: Fix test regression when $ADT_TEST* are not set.
-- Martin Pitt <email address hidden> Tue, 15 Sep 2015 08:38:54 +0200
-
autopkgtest (3.17) unstable; urgency=medium
* setup-commands/cloud-vm-setup: Provide fallback for Ubuntu 12.04 which
does not yet have /etc/default/grub.cfg.d/.
* adt-virt-ssh: Add --timeout-ssh option. Thanks Leo Arias for the initial
patch. (LP: #1488358)
* adt-run: Add --env option to pass arbitrary environment variables to the
test.
* adt-virt-lxc: In the auxverb, clean up leaked background processes which
share the same stdout/stderr, to avoid eternal hangs. (LP: #1488359)
* Move Testbed class and related logic into separate module
lib/adt_testbed.py, and clean up some unnecessary code interdependencies
and error handling. This will make it easier to write alternative CLI
frontents. This also handles test timeouts in a better way: There now is a
proper "summary" report as "FAIL timed out", and subsequent tests will now
run. (Closes: #741322)
* Drop the --leave-lang option. Please use the explicit option --set-lang
instead, to avoid weakly defined behaviour.
* Move Binaries class into separate module lib/adt_binaries.py.
* Testbed.execute(): Explicitly decode output of programs as UTF-8, instead
of relying on the host locale's encoding.
* tools/adt-setup-vm: Only configure eth0 in ifupdown if it actually exists,
and then make sure it does not get renamed any more.
* Add @builddeps@ build profile parsing fallback for libdpkg-perl < 1.04;
just ignore all build profiles.
* ssh-setup/nova: Add workaroud for cloud-init bug writing a wrong
/etc/hosts. (LP #1494678)
* adt-run: Log running kernel after each boot. (part of LP #1491865)
* Track initial kernel version after test bed setup and when a test/reboot
changes the running kernel version. Log these, and create a new
"testinfo.json" in the output dir with this information. (LP: #1491865)
* If --env options are specified, add these as list of name=value strings as
"custom_environment" key to testinfo.json.
* Put vserver arguments into testinfo.json.
-- Martin Pitt <email address hidden> Mon, 14 Sep 2015 15:02:39 +0200
-
autopkgtest (3.16.3) unstable; urgency=medium
* adt-setup-vm: Use /etc/cloud.cfg.d/ to avoid conffile prompts on upgrades.
(LP: #1477626)
* Don't invoke QEMU with -localtime. QEMU defaults to and Linux prefers the
hw clock in UTC. This avoids large time jumps when doing NTP.
* adt-setup-vm: Start autopkgtest shell after all other SysV init
scripts/facilities, to avoid a too early start of tests while boot is
still in progress.
* doc/README.package-tests.rst: Use comma separator in examples.
* VirtSubproc.check_exec(): Actually error out on stderr as documented.
* adt-virt-ssh: Verify that sudo does not write errors, as that
interferes with auxverbs and generally is a sign of host mis-configuration
(typically wrong hostname).
* ssh-setup-nova: Set hostname to "adt". This avoids overly long host names
from defaulting to nova instance names (which can be very long).
* ssh-setup/nova: Fix parsing of IP address from "nova show" to avoid
tripping over instance names containing "network". (LP: #1481574)
* Fix error message and code for "invalid test depends" errors.
* tests/pep8: Ignore E402 ("module level import not at top of file"), as
that's impossible to satisfy; we have to set sys.path before.
* ssh-setup/nova: In cleanup(), wait until the instance gets deleted. This
avoids name collisions and instance quota overflow.
* adt-run: Always show summary at the end, which is particularly helpful for
multiple tests. (LP: #1484991)
* adt-run.1: Clarify that without any logging options adt-run only logs to
stderr. (LP: #1485661)
* adt-virt-lxc: If the executed command exits with 255, translate that to
253 in the auxverb wrapper, as 255 is the exit code for failures of the
auxverb itself. This avoids considering ordinary test failures as
temporary testbed failures.
* adt-run: Show host name, to more easily identify hosts with frequent
failures.
* adt-virt-lxc: Always call lxc-stop with --kill, as the containers are not
precious and normal shutdown might hang.
* adt-virt-lxc: In cleanup, stop LXC container before removing the shared
downtmp, to ensure that we always clean up the running container. Also
don't fail on errors. (LP: #1488879)
* ssh-setup/nova: Add missing apt sources for -updates/-security
restricted/multiverse pockets.
-- Martin Pitt <email address hidden> Thu, 27 Aug 2015 19:54:51 +0200
-
autopkgtest (3.16.2) unstable; urgency=medium
* Exit with code 4 ("test failure") if a test times out, instead of 16
("testbed failure").
* Exit with code 12 ("erroneous package") if test dependencies are
unsatisfiable and put badpkg/blame into summary, instead of exiting with
code 20 ("other unexpected failures including bad usage").
* Exit with code 12 ("erroneous package") and a proper error message if
debian/tests/<testname> does not exist, instead of code 20 and a confusing
message about chmod failing and *-stderr missing.
* Exit with code 12 ("erroneous package") instead of 20 if test dependency
package install fails.
* adt-virt-ssh: If the executed command exits with 255, translate that to
253 in the auxverb wrapper, as 255 is ssh's (and auxverb's) exit code if
something with the connection failed. This avoids considering ordinary
test failures as temporary testbed failures. (LP: #1475679)
-- Martin Pitt <email address hidden> Fri, 17 Jul 2015 17:08:03 +0200
-
autopkgtest (3.16.1) unstable; urgency=medium
* setup-commands/cloud-vm-setup: Fix installation of linux-generic on
Ubuntu.
* ssh-setup/nova: Clean up userdata temp file on failed nova boot.
* If the test fails with exit code 127 (usually "command not found"),
consider this a test failure (code 4), not a testbed failure (code 16).
* doc/README.package-tests.rst: Document that "Tests:" and similar fields
can be comma separated too, like everywhere else in Debian's control
files.
* ssh-setup/nova: Show name of created nova instance, so that it's easier to
map instances to a test.
* run-from-checkout: Exec adt-run to avoid keeping the shell wrapper process
around.
* ssh-setup/snappy: Fix check whether --image and --channel are specified
together. (LP: #1474735)
* ssh-setup/nova: Allow selecting net IDs by name.
-- Martin Pitt <email address hidden> Fri, 17 Jul 2015 11:11:36 +0200
-
autopkgtest (3.16) unstable; urgency=medium
Behaviour changes and improvements:
* ssh-setup/nova: Re-try nova boot up to three times if it fails, and sleep
5 minutes in between. This occasionally fails due to exceeding quota or
temporary glitches.
* Drop gpg-signing local archive and mark it as [trusted=yes] instead. This
gets rid of the requirement to generate a gpg key on first run. Drop
corresponding --gnupg-home option. (LP: #1472691)
* Drop long-obsolete --tmp-dir backwards compat option.
* ssh-setup/snappy: Adjust ubuntu-device-flash arguments to new
release/channel structure from Ubuntu 15.10, and default to rolling/edge.
Add new --release option.
Bug fixes:
* ssh-setup/nova: Silence "invalid command wait-reboot" warning.
* setup-commands/cloud-vm-setup: Purge cloud-init too. It sometimes causes
longer hangs on boot and might interfere with tests in other ways, and we
only need it for first-time initialization anyway.
* adt-virt-qemu: adt-buildvm-ubuntu-cloud: Don't use -enable-kvm QEMU option
if /dev/kvm does not exist. (Closes: #790650)
* Quiesce warnings from tar. Avoids "time stamp is in the future" log spew.
(LP: #1468868)
* Move apt sources setup from setup-commands/cloud-vm-setup to
ssh-setup/nova. --apt-pocket does not work with the former as that runs
too late.
* Use Dpkg::Deps to evaluate/reduce build dependencies for expanding
"@builddeps@". This handles build profiles. (Closes: #787093)
* Resolve build profiles when installing build dependencies to build tested
package.
* Adjust NullRunner.test_tmp_install_perl test case to use
libtest-requires-perl instead of libtest-tester-perl; the latter got
removed from Debian.
-- Martin Pitt <email address hidden> Fri, 10 Jul 2015 11:26:36 +0200
-
autopkgtest (3.15.1) unstable; urgency=medium
* adt-buildvm-ubuntu-cloud: Fix lsb_release fallback if python3-distro-info
is not available.
* adt-buildvm-ubuntu-cloud: Don't move the uninitialized image to final
location if QEMU failed.
* adt-buildvm-ubuntu-cloud: Check availability of genisoimage and access of
/dev/kvm before downloading image. (LP: #1466486)
* Get along with dpkg-query not existing, such as in latest Ubuntu Snappy
images. Skip generation of testbed-packages artifact in that case.
(LP: #1469647)
* Adjust NullRunner.test_tmp_install test case to work with pygobject 3.16.
-- Martin Pitt <email address hidden> Mon, 29 Jun 2015 13:07:34 +0200
-
autopkgtest (3.15) unstable; urgency=medium
Behaviour changes and improvements:
* The specified --output-dir now must not exist or be empty. If it is
non-empty, adt-run now will refuse to use it instead of cleaning it. This
is safer, to avoid accidentally using the home directory or similarly
precious data. (LP: #1463561)
* Add --no-auto-control option to disable autodep8. (Closes: #788659)
* ssh-setup/nova: Add -e/--env option to append to /etc/environment. This is
mostly useful to configure $http_proxy and friends.
* ssh-setup/nova: Add --mirror option.
* Add setup-commands/cloud-vm-setup: --setup-commands script for cloud
instances to prepare them for running autopkgtests. This is similar to
adt-setup-vm, but won't configure serial console or networking.
Bug fixes:
* adt-setup-vm: Print a warning if calling update-grub fails, instead of
aborting. This fixes vmdebootstrap --grub, as that installs grub after
running the customization script. Adjust adt-virt-qemu.1 manpage to
recommend the --grub option of vmdebootstrap.
* testdesc.py, parse_rfc822(): Entirely ignore lines which only contain
whitespace after filtering out intra-line comments. They break
continuation line parsing in python-debian >= 0.1.23. (Closes: #784942)
* adt-setup-vm: Add inclusion of interfaces.d/ to /etc/network/interfaces.
This belongs into vmdebootstrap (#788792), but fix that locally for the
time being.
* adt-run.1: Document --testname.
-- Martin Pitt <email address hidden> Sun, 28 Jun 2015 11:55:34 +0200
-
autopkgtest (3.14.3) unstable; urgency=medium
* adt-virt-lxc: Don't try to set up a shared downtmp with unprivileged
(user) containers. This is full of permission errors due to the mapped
UIDs.
* tests/adt-run LxcRunner: Use $ADT_TEST_LXC as unprivileged user container
if it exists.
* adt-buildvm-ubuntu-cloud: Check at the beginning if QEMU command is
available and exit with proper error message if not. (LP: #1460066)
* If auxverb fails with exit code 126, 127, 254, or 255, consider this a
failure of auxverb/the testbed itself, not of the program run under it.
(As specified in doc/README.virtualisation-server.rst) (LP: #1462540)
-- Martin Pitt <email address hidden> Sat, 06 Jun 2015 13:09:50 +0200
-
autopkgtest (3.14.2) unstable; urgency=medium
* Add tests/testpkg-{simple,reboot,reboot-prepare}: Very simple stub
packages for manual testing.
* VirtSubproc, cmd_reboot(): Disconnect the backgrounded reboot command from
stdout/err, to avoid it getting killed by the ssh runner. (LP: #1454735)
-- Martin Pitt <email address hidden> Tue, 19 May 2015 14:45:34 +0200
-
autopkgtest (3.14.1) unstable; urgency=medium
* Go back to using the backgrounded reboot command as we had before 3.14.
Just calling "reboot" is prone to hangs and timeouts in case reboot is too
fast and shuts down our communication channel.
* Fix --override-control option in adt-run(1). (LP: #1453495)
* Fail with an error if --override-control file does not exist.
(LP: #1453503)
* ssh-setup/snappy: Add -b/--show-boot option to direct boot and console
messages to stdout. (LP: #1453154)
* adt-virt-qemu.1: Document --show-boot option.
* Add test case for using a @ command line include file for a virt runner.
* Strip leading and trailing space from argument lines in '@' included
command line argument files. (LP: #1453498)
-- Martin Pitt <email address hidden> Wed, 13 May 2015 14:45:43 +0200
-
autopkgtest (3.14) unstable; urgency=medium
Improvements:
* adt-virt-ssh: Add --reboot option to indicate that testbed can be
rebooted. This is useful when running without a setup script (which can
already declare capabilities).
* Simplify reboot implementation: Just call "reboot" as root in the testbed
to trigger rebooting, and replace the former hook_reboot() in adt-virt-*
with hook_wait_reboot() which merely waits for the testbed to go down and
come back up. This also replaces the "reboot" command for ssh setup
scripts to "wait-reboot" and in most cases it is not needed to implement
this at all (except for the "adb" script).
* Add /tmp/autopkgtest-reboot-prepare script for testbeds which support
rebooting. This saves the current state but leaves the actual reboot to
the test itself. This is useful if rebooting should happen with unusual
means (e. g. kexec) or as part of testing something else (like a system
upgrade). (LP: #1445819)
* Log complete command line invocation, for easier local reproduction,
comparison of log files, and clarifying which options were used.
(LP: #1449413)
Bug fixes:
* Update Vcs-Git: field for anonscm.debian.org.
* Drop obsolete XS-Testsuite: control field.
* adt-setup-vm: Fix script error if $ADT_SETUP_VM_POST_COMMAND is not set.
* README.click-tests.rst: Describe x-source manifest entry.
* Mark test dependencies as manually installed, so that they don't go away
if a test calls "apt-get autoremove".
* Set DEBIAN_FRONTEND=noninteractive for tests. This avoids stderr messages
about "unable to open stdin" and similar when tests call apt-get install.
-- Martin Pitt <email address hidden> Tue, 05 May 2015 10:14:23 +0200
-
autopkgtest (3.13) unstable; urgency=medium
* ssh-setup/adb: Add --keep-screen-active option to keep
"powerd-cli display" running after the tests. Use with caution!
(LP: #1441023)
* adt-buildvm-ubuntu-cloud: Add --post-command for running a shell command
after setup for additional customization.
* ssh-setup/adb: Quote tr arguments.
* click tests: Look into app/tests/autopilot/ for tests as well if no
explicit path is given. This is the default location of the Ubuntu cmake
templates.
-- Martin Pitt <email address hidden> Wed, 22 Apr 2015 11:50:18 +0100
-
autopkgtest (3.12.1) unstable; urgency=medium
[ Didier Roche ]
* setup-commands/ubuntu-touch-session: Use "upstart" instead of "init".
(LP: #1422681)
[ Martin Pitt ]
* adt-build-lxc: When removing the old root file system, remove btrfs
subvolumes in it.
* README.package-tests.rst: Document that '#' can be used for comments.
(Part of LP #1434543)
* Ignore debian/tests/control stanzas with unknown fields, as documented.
(LP: #1434543)
* adt-buildvm-ubuntu-cloud: Drop workaround for LP #1428495, it got fixed in
cloud-init a while ago.
* adt-buildvm-ubuntu-cloud: Fix cloud-init's prerm hacking to apply after
dist-upgrades.
-- Martin Pitt <email address hidden> Tue, 07 Apr 2015 07:26:27 +0200
-
autopkgtest (3.12) unstable; urgency=medium
* ssh-setup/adb: Re-enable ssh after reboot, in case an upgrade disables it.
* ssh-setup/adb: Try to create /userdata/.adb_onlock, to get adb after
rebooting without human interaction.
* Fix apt-get install --simulate version parsing with third-party sources.
(LP: #1430017)
* ssh-setup-nova: Add --security-groups option. (LP: #1429862)
* adt-buildvm-ubuntu-cloud: Avoid non-blocking reads from the socket in
verbose mode, this sometimes causes hangs. Go back to blocking reads, but
don't wait between them.
* Fix UnicodeDecodeError on .deb package name reading. (LP: #1430773)
* adt-virt-ssh: Export $SUDO_ASKPASS to tests if sudo is available.
(LP: #1431421)
-- Martin Pitt <email address hidden> Fri, 13 Mar 2015 12:52:49 +0100
-
autopkgtest (3.11.1) unstable; urgency=medium
* Fix autopkgtest-reboot to also work when being called through sudo, and
for forking test scripts.
* Avoid failure if /var/cache/apparmor/click-ap.rules does not exist any
more after a reboot, like on snappy.
* adt-buildvm-ubuntu-cloud: Avoid cloud-init's prerm stopping cloud-init's
services while we are still running them. This makes it possible to purge
cloud-init from user-data, and avoids killing apt/dpkg underneath us. This
needs a cleaner solution, but is a good enough workaround for now.
(LP: #1427999)
* adt-buildvm-ubuntu-cloud: Don't wait between serial console reads while
we have data. Provides faster/smoother output in --verbose mode.
* ssh-setup/nova: Fix error message on missing keypair, the command is
"keypair-add", not "keypair-create". Thanks Thomi Richards! (LP: #1428433)
* adt-buildvm-ubuntu-cloud: Add workaround for recent cloud-init regression
that disables ssh (LP #1428495)
* adt-run: Suggest common reason for unsatisfiable test dependencies.
Suggest using a current image, or run apt-get update/-U (for apt-get) or
--setup-commands ro-apt-update (for temp dir install mode). (LP: #1425682)
* Quiesce confusing "failed to create symbolic link
/sbin/autopkgtest-reboot" warning on read-only testbeds.
-- Martin Pitt <email address hidden> Thu, 05 Mar 2015 13:33:12 +0100
-
autopkgtest (3.11) unstable; urgency=medium
Improvements:
* Add action argument --testname to run only one individual test from the
next package.
Bug fixes:
* Restore click AppArmor profiles after a test, if we modified them before
the test.
* When running a deb test in a click+AppArmor environment, update AppArmor
rules for all clicks for introspectability and temporary test
dependencies. This takes about a minute before the test, and another one
after the test, but is necessary for use cases like ubuntu-sanity-tests.
(LP: #1424889)
-- Martin Pitt <email address hidden> Fri, 27 Feb 2015 07:02:52 +0100
-
autopkgtest (3.10) unstable; urgency=medium
Improvements:
* adt-virt-lxc: Add reboot support for non-ephemeral containers.
* tests/run-parallel: Don't run all test classes in parallel, it creates too
much load. Serialize test classes which use the same runner.
Bug fixes:
* VirtSubproc.py, cmd_reboot(): Fix debug message.
* tests/adt-run: Avoid re-downloading ubuntu-device-flash images by
symlinking ~/.cache/ubuntuimages from the temp $HOME into the real user's
$HOME.
* adt-virt-lxc: Fix check for eatmydata when using --eatmydata.
* adt-virt-qemu: Synchronize ttyS0 output before writing eofcat.
* adt-virt-qemu, adt-virt-lxc: Asynchronously call reboot, to avoid eternal
hangs when it reboots too fast for us to notice that it finished.
-- Martin Pitt <email address hidden> Tue, 24 Feb 2015 11:40:42 +0100
-
autopkgtest (3.9.7) unstable; urgency=medium
* Include "Package-Type: deb" marked packages for testing. Fixes regression
with testing paramiko.
* adt-virt-qemu: Robustify setupup of shared /autopkgtest directory.
* VirtSubProc.expect(): Read data without delay as long as we have some.
* adt-virt-qemu: Add --show-boot option to show boot messages from serial
console.
* adt-setup-vm: Configure "console=ttyS0" boot option in grub on non-i386
architectures too, to fix serial consoles with systemd images. Create
/etc/default/grub.d/ if necessary.
* adt-setup-vm: Only configure grub if update-grub is available.
(Closes: #778907)
* adt-virt-qemu: Increase reboot and dpkg-reconfigure timeouts; on loaded
machines these might take longer than 5s.
* adt-run: Unless --leave-lang is given, unset $LANGUAGE and all $LC_* for
tests, to avoid clobbering the testbed locale with the host's.
(LP: #1423359)
-- Martin Pitt <email address hidden> Sun, 22 Feb 2015 13:30:35 +0100
-
autopkgtest (3.9.6) unstable; urgency=medium
* Skip test_tmp_install_imagemagick test case if python3-wand is not
available.
* adt-virt-ssh: Ignore errors when cleaning up the work dir. This races with
sshd cleaning up its control socket, don't stumble over that.
(LP: #1420355)
* Implement --timeout-factor, which was forgotten with the rewrite in
version 3.2. (LP: #1420540)
* ssh-setup/adb: Fix waiting for the desktop to boot: Lower D-Bus call
timeout to 5 seconds, and fix retry loop to time out afer 5 minutes of
real time instead of a fixed number of retries (as the duration of the
D-Bus call is not very reliable).
* virt-subproc/adt-virt-ssh: Don't try to exit the ssh muxer if we don't
have a ssh command yet. This happens when the setup script fails to open
the testbed.
-- Martin Pitt <email address hidden> Fri, 13 Feb 2015 12:55:29 +0100
-
autopkgtest (3.9.5) unstable; urgency=medium
* adt-run install_tmp(): If we have Python and Perl modules, don't specify
the Python modules in $PERL5LIB.
* Recognize udev rules from packages in temp dir install mode. Copy them to
/run/udev/rules.d/ and trigger them. (LP: #1417966)
* setup-commands/ubuntu-touch-session: Don't fail on udevadm failure, which
cannot work in schroots.
* adt-virt-qemu: Ensure that python3 or python is available (which is
required for the auxverb helper) and exit with a meaningful error message
if it isn't. Adjust the manpage accordingly. Fix adt-setup-vm to install
python3-minimal if no Python is already installed. Thanks to Christian
Kastner for the initial patch! (Closes: #777478)
* Support temp dir install mode for python[3]-wand's really broken way of
finding the imagemagick shared libraries. (LP: #1419024)
-- Martin Pitt <email address hidden> Tue, 10 Feb 2015 16:53:01 +0100
-
autopkgtest (3.9.4) unstable; urgency=medium
* Recognize modern "Package-Type:" control field in addition to
XC-Package-Type.
* ssh-setup/adb: Guard adb wait-for-device with a 5 min timeout.
(LP: #1414939)
* README.running-tests.rst: Fix mis-spelled ro-apt setup command.
* Add setup-commands/ro-apt-update: Shortcut for temporarily mounting a
readonly root file system writable and run apt-get. This allows tests to
download/unpack test dependencies on older images whose apt indexes are
out of date. (LP: #1408350)
* Export temp dir install mode variables in the test run script instead of
merely running it under that environment, so that we trump non-extending
LD_LIBRARY_PATHs in /etc/environment. (LP: #1407949)
* setup-commands/ubuntu-touch-session: Ensure that /dev/uinput is always
accessible, as we don't necessarily have local logind sessions during
tests. (part of LP #1415514)
* setup-commands/ubuntu-touch-session: Unset UPSTART_JOB (which crept into
the environment from a recent upstart version) when calling initctl, to
fix querying the session D-BUS address. (LP: #1415514)
-- Martin Pitt <email address hidden> Thu, 29 Jan 2015 19:01:41 +0100
-
autopkgtest (3.9.3) unstable; urgency=medium
[ Christian Kastner ]
* Clean up /etc/dpkg/dpkg.cfg.d/autopkgtest on upgrades if its contents are
just "force-unsafe-io", indicating that this file was generated by the
above bug.
-- Martin Pitt <email address hidden> Sun, 11 Jan 2015 13:45:28 +0100
-
autopkgtest (3.9) unstable; urgency=medium
Improvements:
* Add "snappy" ssh setup script to run tests in an Ubuntu Snappy
(http://www.ubuntu.com/snappy) testbed in QEMU. This uses a given image
with -i/--image, or constructs a temporary one using ubuntu-device-flash
(which caches its downloads and is fast).
* adt-run autopkgtest: Install ubuntu-device-flash and qemu-kvm if
available, to run the snappy ssh script tests under autopkgtest in Ubuntu.
* ssh setup script "reboot" commands can now simply "exit 10" if they want
adt-run to just call "reboot" through ssh, instead of having a custom
implementation.
Bug fixes:
* tools/adt-setup-vm: Avoid debconf prompts during dist-upgrade.
* adt-virt-ssh: Wait for ssh to become available before checking for sudo.
Fixes root capability detection for setup scripts which don't already wait
for ssh themselves.
* VirtSubproc.cmd_reboot: Avoid multi-line shell command so that this also
gets along with the ssh runner.
* Fix FileNotFoundError if built tree does not have a debian/changelog file.
Simply skip detection of source package version in this case.
-- Martin Pitt <email address hidden> Mon, 05 Jan 2015 18:09:03 +0100
-
autopkgtest (3.8.1) unstable; urgency=medium
* If the testbed does not have root privileges (e. g. missing sudo
password), install click packages with pkcon and skip the AppArmor rule
adjustment. This makes non-root click tests at least work for
non-Autopilot cases. (LP: #1384417)
* Make --shell-fail also apply to test dependency installation failure.
* Run root tests through "su" as well (if possible), to ensure that these
also get a proper PAM/logind session with all runners. (LP: #1393474)
* Skip the test_tmp_install tests if apt-get download does not work. This
might happen in some build environments which completely disable
networking or don't have working apt-get download for some reason.
(Closes: #769687)
* Don't put the log FIFO into the output directory. This avoids keeping it
in --output-dir, which fails if the output dir happens to be in the tested
tree itself. (LP: #1393426)
* adt-setup-vm: Don't purge man-db. It uninstalls way too much on images
which aren't just minimal environments.
* adt-setup-vm: Drop bogus "X-Start-Before" line in generated init.d script.
(Closes: #770517)
* Respect DEB_BUILD_OPTIONS=nocheck (side issue in #769687)
-- Martin Pitt <email address hidden> Thu, 27 Nov 2014 10:54:02 +0100
-
autopkgtest (3.8) unstable; urgency=medium
Improvements:
* adt-build-lxc: Configure unsafe dpkg I/O and disable apt's download of
package translations, like adt-setup-vm.
* adt-build-lxc: Use eatmydata for lxc-create if available, and install
eatmydata into containers. For Ubuntu, stop installing the default
$packages_template (which is ssh,vim).
* adt-virt-lxc: Pass any additional options/arguments (after --) verbatim to
lxc-start{,-ephemeral}.
* adt-virt-lxc: Stop running ephemeral containers with --keep-data by
default, as this makes them unnecessarily slow due to running on disk.
Environments with little RAM are instead advised to explicitly supply this
or --storage-type as extra arguments.
Bug fixes:
* Create autopkgtest-reboot command in /tmp, as /sbin/ might be read-only
(and /run is usually "noexec", so we can't put it there either). Write it
with "noclobber" to guard against symlink attacks.
* During reboot, if /var/cache/ isn't writable (as on Ubuntu touch images,
argh), fall back to saving the current temp dir in /home.
* adt-virt-ssh: Recreate the sudo wrapper after reboot, as it is in /tmp.
* ssh-setup/adb: Setup adb port forwarding again after rebooting.
* Fix error message if /tmp/autopkgtest-reboot already exists.
* Fix extra space in apt-get option, which breaks apt-get's option parsing
in some circumstances.
* adt-build-lxc: Fix hardcoded "utopic" release name for cache cleanup on
btrfs, use the actual release name from the command line. (LP: #1392589)
-- Martin Pitt <email address hidden> Fri, 14 Nov 2014 08:40:28 +0100
-
autopkgtest (3.7.1) unstable; urgency=medium
* NullRunner.test_tmp_install_perl: Use a package from Ubuntu main, to fix
FTBFS in Ubuntu's buildds.
* Fix AppArmor rule adjustment for a local click package.
* When executing a command in the testbed times out, don't wait for it
after killing if the auxverb includes "sudo". We can't kill those
processes, so we'd wait forever; we can only hope that they eventually
terminate themselves after we stop the testbed. Fixes non-working timeouts
for LXC runner with the --sudo option.
* Show "set -x" trace of AppArmor reconfiguration in debug mode.
* Use "install" instead of "short" time out for downloading and unpacking
dependencies in "temp dir" mode.
* ssh-setup/adb: Retry connecting with ssh a few times, the first time
doesn't always succeed immediately after enabling ssh.
* tools/adt-setup-vm: Prevent subsequent cloud-init runs from modifying the
apt sources again.
-- Martin Pitt <email address hidden> Tue, 11 Nov 2014 07:54:40 +0100
-
autopkgtest (3.7) unstable; urgency=medium
Improvements/cleanup:
* When not logging to a file, colorize adt-run debug/info/warning/error
messages to better tell them apart from from apt and test output.
* adt-virt-schroot: Simplify determination of schroot session location.
* adt-virt-chroot: Drop support for dchroot arguments. dchroot has been
obsoleted by schroot for a long time now, and isn't being tested by the
developers. Allow relative chroot paths.
* adt-virt-ssh: Rewrite adt-ssh-wrapper to not call the readlink command on
every single /proc/*/fd/*. This is too slow on devices like Ubuntu Touch,
where it adds an extra ~ 5 seconds to every command.
* ssh-setup/adb: Drop --rw and --apt-update options. They stopped working
when adb switched to running as user, and can be done with
--setup-commands.
* Recognize Perl modules in temp dir install mode.
* Consider programs in the temp dir install tree for preparing the source
package. This makes it possible to run --source or --apt-source tests in
read-only environments without dpkg-dev installed. (LP: #1383878)
* With --apt-upgrade, retry apt-get update a third time after one minute.
With just a second try we still get occasional hash sum mismatches.
* Recognize Qt plugins in the temp dir install tree, so that autopilot tests
work on images which don't have autopilot-qt installed any more.
* Remove the "adt-satdep" package after test installation finished, to avoid
tests being confused about an unexpected package.
* ssh-setup/adb: Drop "autopilot --dbus-probe enable" call. It wastes some
1.5 minutes and is not needed any more, as we now reconfigure AppArmor for
the particular clicks that we want to test.
Bug fixes:
* adt-virt-ssh: Terminate the ssh connection muxer on cleanup. Fixes eternal
hangs on waiting for tee with the --output-dir option, as the muxer
inherits our stderr. (LP: #1384324)
* Fix crash when running from a git checkout, but git is not installed.
* ssh-setup/adb: Robustify powerd-cli invocation. It previously failed
randomly.
* ssh-setup/adb: Quiesce some noise from various phablet-config/gdbus/adb
commands.
* ssh-setup/adb: If the welcome wizard is already running, just kill that
instead of the entire session. In particular, this avoids killing adb on
both the host and the device.
-- Martin Pitt <email address hidden> Thu, 30 Oct 2014 10:47:16 +0100
-
autopkgtest (3.6) unstable; urgency=medium
[ Antonio Terceiro ]
* README.package-tests.rst: Make references to the control field consistent.
[ Martin Pitt ]
* When parsing .changes files, always register the debs before the dscs and
stop assuming Files: having this order already. (Closes: #764795)
* Drop the builtin synthesis of Perl/Ruby tests and use autodep8 instead.
Update the spec accordingly, and add a Recommends: autodep8.
(Closes: #763847)
* adt-build-lxc: Implement LXC cache cleanup for btrfs by removing the image
snapshots instead of rm -r'ing the cache dir, as the latter will fail.
* adt-setup-vm: Fix missing hashbang of generated /etc/init.d/autopkgtest.
(Regression from 3.5.5)
-- Martin Pitt <email address hidden> Thu, 16 Oct 2014 16:36:11 +0200
-
autopkgtest (3.5.5) unstable; urgency=medium
* adt-virt-ssh: Be more liberal when parsing the setup script's
capabilities, accept spaces and commas.
* adt-virt-ssh: Refactor code so that setup script's "revert" commands can
update/refresh the ssh config. Often revert translates to close and
re-open, which changes the IP. Update manpage and ssh-setup/SKELETON
accordingly.
* ssh-setup/nova: Make parsing commands work with mawk too, to avoid
depending on gawk.
* ssh-setup/nova: Implement a simple revert by a simple teardown/providing a
new instance. (This might become more efficient in the future with using
snapshots.)
* adt-buildvm-ubuntu-cloud: Put vmalloc kernel commandline config into
separate grub.d/ directory, to avoid subsequent cloud-init invocations
overwriting it.
* tools/adt-setup-vm: Add setup steps that adt-buildvm-ubuntu-cloud does, so
that vmdebootstrap generated VMs are functionally on par with the Ubuntu
cloud images: Set up serial console, dpkg unsafe-io, install some
additional packages, remove unnecessary packages, bump vmalloc on i386.
* adt-buildvm-ubuntu-cloud: Remove most of the setup steps from user-data,
and call adt-setup-vm instead. This keeps the knowledge of how to set up
VM testbeds in one single place.
-- Martin Pitt <email address hidden> Thu, 09 Oct 2014 15:20:15 +0200
-
autopkgtest (3.5.4) unstable; urgency=medium
adt-run fixes:
* Make apt-get source calls again show what's being downloaded, but not all
the other noise around it.
* Avoid copying down the tests tree into the testbed if it already exists
there. This is the common case for the first test in unbuilt trees, and
avoids one round of expensive large copying for the ssh and qemu runners.
* Fix relative --override-control paths: They should not be relative to the
source dir but relative to the current dir where adt-run is called.
ssh-setup/nova fixes:
* Add -N/--net-id argument for OpenStack deployments which require setting
an explicit --nic net-id.
* Stop using nova boot's --file option, it does not work any more (see
LP#1376176); use --user-data instead. Also set some go-faster apt options.
* Wait until ssh is available and cloud-init is done.
* Stop making --keyname mandatory. If not given, use the first one from
"nova keypair-list".
* Fix crash if ~/.ssh/known_hosts does not exist.
ssh-setup/adb fixes:
* Drop the sudo'ing for unlocking the screen. It stopped working and is not
necessary, now that we don't have images with adb running as root any
more.
* Fix unity8 restart after disabling first-time wizard to work on current
Ubuntu Touch images.
* Wait until com.canonical.UnityGreeter becomes available. This is a better
way to wait for the desktop to be started up, and also reliably unlocks
the greeter.
* During revert, don't fail if there are no configured networks.
* Add -b/--reboot option to reboot the device before running the test.
* Disable --reset option for now; it is broken as it does not restore the
password and developer mode. Point towards using --reboot, which should be
good enough for most cases in r/o mode.
adt-virt-ssh fixes:
* Implement reboot.
* Tests or builds sometimes leak background processes which might still be
connected to ssh's stdout/err; create and use a wrapper script that kills
these after the main program (build or test script) finishes, otherwise we
get eternal hangs as ssh waits until nothing is connected to its tty any
more.
Other fixes:
* adt-buildvm-ubuntu-cloud: Purge more unnecessary packages.
-- Martin Pitt <email address hidden> Wed, 08 Oct 2014 09:22:17 +0200
-
autopkgtest (3.5.3) unstable; urgency=medium
* ssh-setup/adb: Use the new "phablet-config network" to save/restore wifi
connections, which also works with non-root adb.
* Give adt-run's tee processes some time to catch up between printing
results and stderr, to avoid scrambled logs. (LP: #1373441)
* Fix NullRunner.test_timeout_no_output for older Python versions.
* tests/pyflakes: Skip test if pyflakes3 is not available (for backports).
* Bump Standards version to 3.9.6 (no changes necessary).
* NullRunner.test_timeout_no_output: Slightly relax time bound to make
failures less likely on loaded/slow machines.
* Install clicks with --allow-unauthenticated to support local developer
generated packages. (LP: #1372640)
-- Martin Pitt <email address hidden> Sun, 28 Sep 2014 12:16:16 +0200
-
autopkgtest (3.5.2) unstable; urgency=medium
[ Martin Pitt ]
* Make apt-get source and package unpack output a bit less verbose.
* Avoid "grep: debian/tests/control: No such file or directory" warning for
packages with implicit test control. (Closes: #762009)
* Adjust "unpack into temp dir" mode for multi-archified typelib locations
introduced in gobject-introspection 1.41.4-1.
[ Niko Tyni ]
* Test perl packages that include test.pl, not just t/. (Closes: #762013)
-- Martin Pitt <email address hidden> Tue, 23 Sep 2014 09:31:29 +0200
-
autopkgtest (3.5.1) unstable; urgency=medium
* Fix apt cleanup to remove configuration files before apt-get update.
* When using local binaries, tell apt-get to only download our
autopkgtest.list, not all apt lists again.
* Move autopkgtest gpg directory from ~/.autopkgtest/gpg to
~/.cache/autopkgtest/. Check the former location for backwards
compatiblity.
* Invoke gpg with --no-random-seed-file to avoid VCS noise when using
tests/home/.
* run-from-checkout: Use --gnupg-home with our tests/home to avoid GPG key
generation.
* adt-run: Defer GPG key creation until binary publishing time. This avoids
key creation entirely for the common case of not using any local or built
binaries.
* tests: Use apt-doc instead of cpp-doc, as the latter is in Debian contrib
only. (Closes: #761417)
* When determining whether a testbed reset is necessary in between tests,
also consider if recommends were/will be installed. (Closes: #761420)
* README.package-tests.rst: Packages with implicit test control (ruby/perl)
should use a different Testsuite: value, namely
autopkgtest-pkg-{ruby,perl}, to avoid breaking compatibility with the
specification and to other implementations like sadt.
* autopkgtest-reboot: Switch from SIGPIPE to SIGKILL, as that is much more
reliable.
* Reorganize NullRunner tests so that most run also as normal user (and
hence during package build); only keep four tests in NullRunnerRoot which
actually do need root privileges.
* Improve NullRunner.test_timeout_no_output test case to ensure that the
test is properly killed after timing out.
* Fix invocation of tests so that they retain the default SIGINT handler.
This changes cleanup after a timeout, add new procps dependency for this.
(Closes: #761596)
-- Martin Pitt <email address hidden> Wed, 17 Sep 2014 06:09:30 +0200
-
autopkgtest (3.5) unstable; urgency=medium
Improvements:
* VirtSubProc.cmd_reboot(): Save/restore downtmp instead of creating a new
one. This is more useful for reboot scenarios within tests.
* Support tests that want to reboot the testbed (for runners which support
rebooting). Document this in doc/README.package-tests.rst.
* tests/testdesc: Add test case for Debian packages without a test control.
* If there is no Debian test control file, synthesize one for Ruby and Perl
packages, using gem2deb-test-runner and pkg-perl-autopkgtest. Thanks to
Antonio Terceiro!
* ssh-setup/adb: Unlock the greeter before running tests.
Bug fixes:
* qemu: Reconfigure tzdata after copying /etc/timezone, to make that change
actually active.
* qemu: Wait an additional 3 seconds after the login prompt appears on
ttyS0. Without that, the system time is wrong, causing bad file
timestamps. Unfortunately polling runlevel or the "hwclock" status file
doesn't help.
* Always keep the same downtmp even after resetting the testbed. Some built
trees/tests use absolute path names and break when being moved around
after a reset. This already worked in most cases by accident due to a bug,
but now clean up the code to be explicit about it.
* Expand '@' to quasi-versioned (>= 0~) dependencies to avoid satisfying
them by virtual packages. (Closes: #761003)
* Ensure that the build tree is world-readable. Fixes permission error when
running adt-run as non-root with a different --user and a tight umask.
(Closes: #761049)
* lxc: Ensure the container root directory is accessible to non-root users.
Works around lxc-start-ephemeral bug with tight umasks.
(https://launchpad.net/bugs/1367730)
* lxc: Fix lxc-clone option (--new, not --name).
-- Martin Pitt <email address hidden> Thu, 11 Sep 2014 11:05:16 +0200
-
autopkgtest (3.4.1) unstable; urgency=medium
* adt-buildvm-ubuntu-cloud: Use host's http[s] proxy in the VM, rewriting
localhost addresses accordingly.
* qemu: Accept any runlevel between 2 and 5 as "booted", to also work with
systemd. (Closes: #760060)
* adt-run: Read built tree changelogs with UTF-8 encoding. (Closes: #759752)
* adt-virt-lxc: Source /etc/profile as well, to get $PATH in Debian
environments.
-- Martin Pitt <email address hidden> Thu, 04 Sep 2014 07:52:12 +0200
-
autopkgtest (3.4) unstable; urgency=medium
* Produce a summary file by default when --output-dir is given.
* ssh-setup/adb: Add missing $ADBOPTS for reverting to factory state.
* Add support for retrieving a click source from bzr (from the manifest's
x-source/vcs-bzr key) if --click-source is not given.
* ssh-setup/adb: Use SystemImage D-BUS call for factory reset instead of
direct recovery commands, to also work as user.
* ssh-setup/adb: Add --password/-p option to specify a different sudo
password than "phablet".
* adt-run: Fix $USER in tests if testbed does not have root.
* adt-run: Source shell profiles if testbed does not have root. Fixes
running click tests on Ubuntu Touch without a sudo password.
* ssh-setup/adb: Try common sudo passwords for CI ("phablet" and "0000"); if
those do not work, and none is specified with --password, tests cannot run
as root (which should be fine for most cases).
* ssh-setup/adb: Stop using system-image-cli to detect an Ubuntu phone, as
that does not work as user. Check for unity8 instead, like in other parts
of the code.
* ssh-setup/adb: Fix cleaning up of first-time wizard for non-root adb.
-- Martin Pitt <email address hidden> Mon, 25 Aug 2014 16:10:01 +0200
-
autopkgtest (3.3.3) unstable; urgency=medium
* ssh-setup/adb: Always parse options, so that $ADBOPTS is also defined for
operations other than "open". Fixes failure on close when multiple devices
are present.
* adt-run manpage: Fix references to documentation. (Closes: #758016)
* README.package-tests.rst: Point out that dpkg-source >= 1.17.11 adds the
Testsuite: field automatically. Thanks to Guillem Jover!
* ssh-setup/adb: Use PropertyService to enable ssh, for future compatibility
with non-root adb.
* ssh-setup/adb: Protect against failures of ssh-keygen when pruning the
localhost fingerprint. It fails if ~/.ssh/known_hosts does not exist.
* When copying down, properly fail when there are unremovable files in an
existing directory, instead of ignoring them and making the subsequent
copytree() fail. This helps to get better error messages for #757396.
* Fix crash on undeletable files in source trees. (Closes: #757396)
* ssh-setup/adb: If there is no default ssh key, create an
~/.ssh/id_autopkgtest and use that.
* Run autopilot tests with generating a subunit stream in
<output-dir>/artifacts/<testname>.subunit, and in verbose mode.
-- Martin Pitt <email address hidden> Wed, 20 Aug 2014 20:11:17 +0200
-
autopkgtest (3.3.2) unstable; urgency=medium
* When logging output to a file, properly close the "tee" processes' stdin
and wait for them to finish, instead of just killing them. This avoids
truncated logs on heavily loaded machines.
* Fix NullRunnerNoRoot.test_tmp_install test if gir1.2-json-1.0 is already
installed.
* Use long options for calling programs except for the most common ones, for
easier comprehension.
* qemu: Read all responses from ttyS1 after sending commands. Qemu 2.1 seems
to configure serial sockets differently, and not flushing responses
confuses it.
* qemu: Use "cache=unsafe" option to improve performance when the overlay is
not on a tmpfs.
* Further robustify cleaning up the chroots in the ChrootRunner tests.
* adt-build-lxc: When updating containers, move the new rootfs completely to
the original container. The rsync approach did not reliably update all
files.
-- Martin Pitt <email address hidden> Wed, 06 Aug 2014 11:28:00 +0200
-
autopkgtest (3.3.1) unstable; urgency=medium
* Accept comma separators in Tests:, Restrictions:, and Features: fields;
this is consistent with Depends: and avoids skipping tests. (LP: #1347958)
* Generalize implementation of getting an interactive shell in testbeds.
Most runners now don't need to provide a hook_shell() any more.
* Export install environment to interactive testbed shells, so that
unpacked test depends in the temp dir are accessible. (LP: #1339103)
* lxc: Don't fail on a nonexisting /etc/environment or /etc/default/locale.
(LP: #1348749)
* adb ssh script: Add --apt-update option to run "apt-get update" (with
temporarily switching to r/w), to run tests on older development images.
(LP: #1342838)
* Drop the very short and unnecessary install timeouts from the NullRunner
tests.
-- Martin Pitt <email address hidden> Tue, 29 Jul 2014 13:45:36 +0200
-
autopkgtest (3.3) unstable; urgency=medium
Improvements:
* Define "Classes:" (Debian) / "classes" (click manifest) test control field
in the specifications. For packages whose tests should run on particular/a
set of different hardware/platforms, this can specify a list of abstract
class names such as "desktop" or "graphics-driver". Consumers of
autopkgtest can then map these class names to particular
machines/platforms/policies.
* Fall back to searching for --setup-commands files in
/usr/share/autopkgtest/setup-commands/ if they are specified without path,
to reduce typing.
* Fall back to searching adt-virt-ssh's --setup-script in
/usr/share/autopkgtest/ssh-setup/ if they don't exist in the current
directory, to reduce typing.
Bug fixes:
* When running a test as user on a root testbed, run source extraction under
set -e, to fail early at the proper error. (LP: #1346388)
* Add test case for non-existing --apt-source package name.
* Add "installed" autopkgtest to run adt-run against a simple source tree in
$ADTTMP, to avoid using Python modules from the autopkgtest source tree.
This spots grave bugs like in 3.2.1.
-- Martin Pitt <email address hidden> Wed, 23 Jul 2014 09:16:08 +0200
-
autopkgtest (3.2.2) unstable; urgency=medium
* adt-run: Fix typo that broke --apt-source with "build-needed" tests.
-- Martin Pitt <email address hidden> Mon, 21 Jul 2014 15:07:17 +0200
-
autopkgtest (3.2) unstable; urgency=medium
Improvements:
* Add --copy option to copy a file or directory into the testbed.
* Support specifying a click name like "com.example.myapp" with --click to
test an already installed click instead of a local *.click file.
(LP: #1338899)
* Introduce "autopilot_module" click test control field for specifying an
autopilot test module name. This allows tests to require additional test
dependencies, restrictions, etc. without having to specify the full
invocation of autopilot. (LP: #1338911)
* In "unpack into temp dir" mode, ignore Python 2.x test dependencies. They
are not exposed anyway as with $PYTHONPATH we can only serve one major
Python version, and we want Python 3.
* Port remaining runners from obsolete optparse to modern argparse. This
gives a consistent command line help and support for reading options from
a file with '@'.
* Port adt-run to argparse, and clean up the CLI:
- Drop rarely used and confusing options: --instantiate, --sources-tests,
--sources-no-tests, --built-binaries-filter,
--binaries{,-forbuilds,-fortests}. Add a single new --built-binaries as
the opposite of -B/--no-built-binaries.
- CLI parsing is now done in lib/adt_run_args.py, with separate unit
tests.
- This now allows any part of the command line (for adt-run itself or the
virt-server or both) to be read from a file, using the '@' prefix.
(Closes: #749241)
- Separate the options into different logical groups, in both --help and
the manpage.
* Make --override-control work for click manifests. (LP: #1342818)
* Introduce "Test-Command:" debian/tests/control field to run a shell
command instead of a "Tests" named executable. This avoids having to write
trivial one-liner scripts or allows wrapping calls to test executables.
(Closes: #741330)
Bug fixes:
* Set $USER environment variable also for tests that run as root.
(LP: #1337802)
* Add lintian override for ssh-setup/SKELETON, it's deliberately not
executable.
* Increase timeout for aa-clickhook workaround for LP#1337253, 100s is often
not enough.
* ssh-setup/adb: Disabling the first-time wizards sometimes fails due to adb
being brittle at that time. Retry up to 5 times.
* Optimize aa-clickhook workaround for LP #1337253 to only rebuild the
profile of the installed click app. This reduces the time from about a
minute to about a second.
* qemu, lxc: Use VirtSubproc subprocess wrappers to get timeout handling for
all commands.
* Rewrite build depends to not rely on builders being able to fall back to
alternatives (python >= 3.3 | python3-mock), to ease backporting.
* tests/pyflakes: Use pyflakes3.
* Only run pyflakes test during package build if pyflakes3 is available.
This unbreaks backports.
* Run "click info" as the same user as the test. (LP: #1342836)
* Keep <testname>-stderr output files for "allow-stderr" tests.
-- Martin Pitt <email address hidden> Mon, 21 Jul 2014 09:35:17 +0200
-
autopkgtest (3.1) unstable; urgency=low
Improvements:
* ssh-setup/adb: On Ubuntu phones, use phablet-config to disable first-time
wizards/intros. Implement reboot and revert. This requires phablet-config
now, either installed as package or from bzr checkout with
PHABLET_TOOLS_PATH=<checkout dir>.
* ssh-setup/adb: Save/restore NetworkManager system connections in revert.
* ssh-setup/adb: Add -r/--reset option to perform a factory reset before
running tests.
* Bring back --control-override option, with tests and documentation.
Bug fixes:
* Work around subprocess.Popen bug in Python 3.2.
* lib/testdesc.py: Change exceptions to be Python 3.2 compatible.
* Kill the actual test on timeout instead of just the wrapping shell script.
* Fix workaround for LP #1333215: Don't run with "su -l" as that causes
extra stdout spew from su for nonexisting home directories; instead just
source /etc/profile and ~/.profile as these are the parts that we need.
* Run aa-clickhook after every click install, otherwise it doesn't apply to
newly installed clicks. Works around LP #1337253.
* Open files which can potentially contain non-ASCII data with explicit
UTF-8 encoding, to avoid UnicodeDecodeErrors under C locale.
(Closes: #753582)
* Fix metavariable names in adt --help.
* ChrootRunner tests: Retry removal of temporary chroot when busy.
* Don't let a first failed apt-get update run break the test due to stderr;
it gets retried 15 seconds later.
-- Martin Pitt <email address hidden> Thu, 03 Jul 2014 13:31:16 +0200
-
autopkgtest (3.0.2) unstable; urgency=low
* Fix -s/--shell-fail to actually work again (regression in 2.19).
* Quiesce the sourcing of /etc/profile and ~/.profile to avoid "stdin: is
not a tty" clutter.
-- Martin Pitt <email address hidden> Wed, 02 Jul 2014 09:28:20 +0200
-
autopkgtest (3.0.1) unstable; urgency=low
* Install ssh setup scripts executable.
* doc/README.running-tests.rst: Add ssh runner example.
-- Martin Pitt <email address hidden> Tue, 01 Jul 2014 15:40:39 +0200
-
autopkgtest (3.0) unstable; urgency=low
Improvements:
* Add support for click packages (https://click.readthedocs.org):
- Add two new actions --click and --click-source to run tests of a click
package. For now, --click-source is mandatory as parsing/getting the
source from a click's x-source manifest entry is not yet implemented.
- Add doc/README.click-tests.rst to document test definition for click
packages.
- Add setup-commands/ubuntu-touch-session: --setup-commands script for
installing click, the Ubuntu SDK, some extra packages for autopilot, and
launching Xvfb and an user upstart session. This approximates the
environment of an Ubuntu touch device. You can also run
setup-commands/ro-apt afterwards.
* If the testbed does not have root (null runner or schroots without
root-user/group) or a writable dpkg database (as on Ubuntu system
images), fall back to unpacking test dependencies into a temporary
directory and set *_PATH environment variables accordingly. This will
make a limited number of test dependencies work in these test beds.
* Add setup-commands/ro-apt for making dpkg/apt readonly, to
approximate what happens with Ubuntu system images.
* Add adt-virt-ssh runner: Generic runner for an externally set up testbed
which assumes nothing else than a working ssh connection. This can call a
"setup script" to create/configure a testbed (such as spinning up a cloud
VM with nova or setting up SSH on a phone through ADB). See the manpage
for details. Thanks to Jean-Baptiste Lallement!
* Add ssh-setup/SKELETON for a basis to write ssh setup scripts.
* Add ssh-setup/adb: Set up an ssh connection to an adb host. If that adb
host is an Ubuntu Touch system, it also does some extra configuration like
disabling the screen timeout and allowing Autopilot to introspect running
apps. See header commends for details. Thanks to Jean-Baptiste Lallement!
* Add ssh-setup/nova: Sets up a nova instance to use as an autopkgtest
testbed. It assumes that the host system is already prepared to run nova
commands. This is not very robust at the moment and more like a proof of
concept. Thanks to Jean-Baptiste Lallement!
* Convert doc/README.* to reStructuredText and rename to *.rst. Build HTML
files from them using rst2html and install them also.
* adt-run: Never run testbed commands with newlines in them. Those make it
ridiculously hard to implement runners which can only accept shell
strings.
Bug fixes:
* lxc: Don't leak the host environment into the container (lxc-attach
currently defaults to that), but build a clean and minimal environment
from /etc/environment and /etc/default/locale.
* Fix calling a virt server with full path.
* lib/VirtSubProc.py, downtmp_remove(): Only remove the downtmp if it is
actually set. This avoids confusing error messages if something fails
during early test bed setup.
* adt-run: set APT_LISTBUGS_FRONTEND=none when installing packages. This
will avoid the apt-listbugs prompt when apt-listbugs is installed.
Thanks to Antonio Terceiro!
* schroot: Ending the schroot session sometimes fails on "Device or resource
busy". Retry 10 times before giving up instead of failing immediately.
* adt-run: Read /etc/profile and ~/.profile when running tests as user. This
emulates the bits of "su -l" that we want, until this gets cleaned up for
using "su -l" completely.
* tests/run-parallel: Get sudo password early, to avoid asking for it in
background jobs.
* Restrict --apt-pocket to *.ubuntu.com and *.debian.org sources, as
third-party repositories such as launchpad.net don't (necessarily) have
pockets. (LP: #1334332)
* Fix high adt-virt-* CPU usage on reading commands on stdin.
-- Martin Pitt <email address hidden> Tue, 01 Jul 2014 15:21:55 +0200
-
autopkgtest (2.20) unstable; urgency=medium
Improvements:
* Add "Test" argument/member for a shell string command, instead of
specifying a path to a test executable. Not currently supported by Debian
parser.
* Convert doc/README.* to Markdown, so that it's easy to format them as PDF
or HTML, e. g. with pandoc.
* If the --user option is given or the testbed specifies a normal user, pass
this to --setup-commands through $ADT_NORMAL_USER.
* Allow --setup-commands which would ordinarily reboot the testbed to
suppress this by creating a stamp file in /run. This is useful for
commands which run processes that aren't started at boot.
* Default to C.UTF-8 locale instead of C. This is supported in Debian >= 7
(wheezy) and Ubuntu >= 12.04 LTS, and much closer to reality than C.
Bug fixes:
* Don't include "adt-satdep" dummy package in <test>-packages output files.
* adt-buildvm-ubuntu-cloud: Use host timezone as default for the VM, to
avoid TZ changes during boot when running tests. Thanks Jean-Baptiste
Lallement!
* Run tests with specified locale also when they run as user.
* Fix test failure with Ubuntu's pkgbinarymangler installed.
-- Martin Pitt <email address hidden> Tue, 24 Jun 2014 16:34:36 +0200
-
autopkgtest (2.19) unstable; urgency=medium
Improvements:
* Support new argument type --changes (implied if file name ends with
".changes"). This behaves as if you specified all debs and the dsc from
the given binary changes file and implies --no-built-binaries. I. e. this
is the right thing to test a local package that you just built.
(Closes: #738552)
Bug fixes:
* schroot: Always advertise "revert" capability, as it implements revert
with simply close()/open().
* adt-run: Move warning about missing root on testbed into the correct
place.
* Install build-essential and build dependencies in one apt run, which is
slightly faster.
* Explicity specify UTF-8 encoding for reading/writing Debian control files,
to fix UnicodeDecodeError under C locale.
* Determine testpkg-version also for --built-tree tests.
* schroot: Refuse to work with non-ephemeral schroots, i. e. "directory"
type schroots without union-type. Point this out in the manpage, too.
(Closes: #751574)
* schroot: Verify that /proc is mounted, and abort with a proper error
message if not. (Closes: #751575)
* adt-buildvm-ubuntu-cloud: Don't start cloud-config with a leading newline,
not yet supported in Ubuntu 12.04's cloud-init. Thanks Jean-Baptiste
Lallement! (LP: #1330950)
* adt-buildvm-ubuntu-cloud: Don't use write_files cloud-init command, not
yet supported in Ubuntu 12.04's cloud-init. Replace with runcmd echos.
* adt-buildvm-ubuntu-cloud: Purge cloud-init and shutdown after cloud-init
is done, not while it's still running.
* adt-buildvm-ubuntu-cloud: Create upstart job for ttyS0 console unless it
already exists, for compatibility with Ubuntu 12.04.
* adt-virt-qemu: Use python3 or python for eofcat depending on which one is
available. Fixes operation with older Ubuntu versions which don't yet
install Python 3 by default.
Code cleanup:
* Unify logging functions into lib/adtlog.py, make their API easier and more
consistent, and use them in adt-run and all adt-virt-*.
* Move test control parsing and keeping data into lib/testdesc.py. This
eases factorization, abstraction for future support of other source
package formats such as click, and testing. Add new tests/testdesc
unittests. This also drops the "tree0t-" like prefixes from test names in
the results and the output file names.
* Don't read --setup-commands files multiple times.
-- Martin Pitt <email address hidden> Wed, 18 Jun 2014 10:07:46 +0200
-
autopkgtest (2.18) unstable; urgency=medium
Improvements:
* adt-run: When running from git, show the current SHA and commit summary of
HEAD.
Bug fixes:
* tests: Fix race in cleaning up ChrootRunner mounts.
* adt-run: If apt-get update fails on publishing built binaries, retry after
15 seconds.
* VirtSubproc.cleanup(): Avoid recursion if something in hook_cleanup()
bombs.
* Fix --shell to also work with --output-dir. (LP: #1317078)
Code cleanup:
* VirtSubproc: Document and cleanup execute*() functions.
* Some test robustifications, to avoid making too many assumptions about
debug output.
* adt-run: Eliminate usage of testbed "execute" command, which is too
complicated and limiting. Use "print-execute-command" directly instead.
* Drop "execute" command.
* adt-run: Unify Testbed.command() and commandr() methods and make them
stricter.
* Add prefixes to all temporary directories.
* Remove autopkgtest-xenlvm. It has been orphaned since ~ 2008, few to no
current users, and no maintainer. (Closes: #508660, #680122)
* Simplify build system.
* Drop concept of "shstring". All runners must provide an auxverb now,
possibly with a wrapper and quoting by themselves if their implementation
can only deal with shell commands. This avoids having to tell apart these
two cases in adt-run, clarifies the documentation, and greatly simplifies
the code. (Closes: #750544)
* qemu: Use low-level IO in runcmd. This avoids all the Python overhead and
buffering and is less prone to bytes vs. string issues.
* qemu: Fix text vs. binary confusion in reading and copying /etc/timezone.
* schroot: Call schroot command with -q, to avoid stderr spew if the schroot
has "message-verbosity=verbose".
* Port to Python 3.
-- Martin Pitt <email address hidden> Thu, 12 Jun 2014 07:48:58 +0200
-
autopkgtest (2.17.1) unstable; urgency=medium
* Make $ADTTMP readable and accessible to other users, for tests which use
other users through "su" and similar.
* adt-virt-qemu: Set $HOME for root also after rebooting.
* tests/adt-run: Force stdout to UTF-8 to see proper failures even in
non-UTF-8 environments, instead of crashing with UnicodeEncodeError.
* adt-run: Flush input to the stdout/err cat processes and give them some
time to catch up after the end of the test, to avoid losing the last bits
of output. (Closes: #750343)
* Add missing build-essential and debhelper test dependencies.
* adt-run: Ensure the cleanup handler for the tests tree runs also if
copying up the tests tree fails. (Closes: #749655)
* Put back the LXC runner on Debian, so that folks with manual LXC container
setups can still use it.
* adt-build-lxc: Check for default networking in /etc/lxc/default.conf. If
it's "empty", abort with an error message that container networking needs
to be set up first. Until LXC gets fixed in Debian (#747914) you need to
manually set up a bridge, dnsmasq, and the default config.
* adt-build-lxc: Support specifying $ADT_APT_PROXY. If apt-cacher-ng is
running locally, use that as a default.
-- Martin Pitt <email address hidden> Wed, 04 Jun 2014 15:03:30 +0200
-
autopkgtest (2.17) unstable; urgency=medium
New features:
* adt-buildvm-ubuntu-cloud, adt-setup-vm: If apt-cacher-ng is running
locally, use that as a default for --proxy/ADT_APT_PROXY.
* Add "reboot" testbed capability and implement it for QEMU (most other
runners don't support it conceptually). Reboot the testbed if the setup
commands affected boot relevant directories (/boot, /etc/init.d,
/etc/init/, or /{etc,lib}/systemd/system). (LP: #1324435)
Bug fixes:
* adt-setup-vm: Run the initial apt-get update without fetching
translations.
* Stop shipping the LXC runner and associated tools on Debian. It does not
work out of the box until Debian's LXC containers get proper networking by
default (see Debian #747914).
* adt-buildvm-ubuntu-cloud: Add LSB header to generated SysV init script to
avoid a warning from insserv.
* VirtSubproc: Fix generation of auxverb from shstring.
* Drop debhelper dependency, not necessary any more since 2.16.
-- Martin Pitt <email address hidden> Tue, 03 Jun 2014 11:49:32 +0200
-
autopkgtest (2.16.4) unstable; urgency=medium
* adt-build-lxc: Unset $http[s]_proxy for the post-creation apt-get update
if it refers to localhost.
* adt-build-lxc: Fix cache cleaning for upgrades.
-- Martin Pitt <email address hidden> Thu, 22 May 2014 17:52:46 +0200
-
autopkgtest (2.16.2) unstable; urgency=medium
* Support ":native" dependencies.
* Add LXC runner test case for running as different user.
* Add QEMU runner test case for performance and integrity of copying (1000
files with 100 kB each).
* copyup/down: Clean up cp process on timeout, to fix eternal hang.
* adt-virt-qemu: Disable shared downtmp. For bigger source trees 9p in
current QEMU is way too slow (in the magnitude of 2 MB/s, and max'ing out
CPU usage), so we can't use it directly as a normal file system.
* Revert "Don't extract/build source packages in shared downtmp", due to
above change. This stops penalizing other runners with extra source tree
copies.
* VirtSubproc: Clean up auxverb processes on timeout.
* adt-run: Stop testbed on TERM and QUIT signals, to avoid leaving stale
schroot/qemu/LXC processes around when e. g. stopping a job from Jenkins.
* adt-virt-qemu: Fix runcmd to make the command's stdin actually look and
behave like a pipe, instead of reading directly from the "stdin" file. The
latter leads to commands exiting prematurely when hitting the file's EOF.
(LP: #1317358)
* Convert one of the QEMU tests from source tree to dsc, to cover that case
as well.
* Add test case for QEMU with --apt-source (using libpng).
* adt-virt-qemu: Create eofcat in /bin instead of the shared /autopkgtest
mount, as running it from the latter again triggers the "invalid numerical
value" bug with 9p from older QEMU versions.
* adt-buildvm-ubuntu-cloud: Purge some unnecessary services to speed up boot
time a bit.
* @builddeps@ now includes build-essential, not just make. (LP: #1317357)
* Make -s/--shell-fail start a shell on failed builds as well.
(LP: #1317055)
-- Martin Pitt <email address hidden> Fri, 09 May 2014 10:32:27 +0200
-
autopkgtest (2.16.1) unstable; urgency=medium
* adt-buildvm-ubuntu-cloud: Configure vmalloc=512M on i386 for the udisks2
autopkgtest.
* adt-buildvm-ubuntu-cloud: Disable downloading of package translations.
* Create testpkg-version and testbed-packages before starting the builds, to
also have them when builds fail.
* Fix VirtSubproc.copyup_shareddir() for testbed paths which are not already
in the shared downtmp.
* When cleaning up a temporary testbed path fails with a permission error,
clean it in the testbed (where we usually have root privileges). This
avoids lots of "ignored OSError" spam with the schroot runner.
* Stop assuming that we can chown files in the shared downtmp, it's not true
with QEMU's 9p file system. Fall back to chmod'ing to world-writable files
as with 9p there is no other way to implement this.
* Simplify source tree/package extraction logic.
* adt-run: Don't extract/build source packages in shared downtmp, to avoid
permission/ownership problems with limited implementations like 9p.
* adt-virt-qemu: Re-enable shared downtmp, now that operation with different
UIDs is fixed.
* Don't create $ADTTMP in shared downtmp to avoid permission/ownership
problems with limited implementations like 9p.
* adt-virt-qemu: Fix exception if workdir is not currently set.
* adt-virt-qemu: Increase timeout for login prompt from 2 to 5 minutes, for
slow VMs or machines under heavy load.
* Improve error handling on copy timeouts.
* adt-virt-qemu: Remove overlay file as early as possible, to avoid leaking
large files in error conditions. Let QEMU run with the deleted inode.
* Don't run apt-get and setup commands with sending output to /dev/stdout.
When redirecting adt-run's output directly into a file this causes a
seek to start and thus partially overwriting the output file. This also
puts the apt-get output back to stdout as it used to be before 2.15.
(Closes: #747041)
-- Martin Pitt <email address hidden> Tue, 06 May 2014 13:25:21 +0200
-
autopkgtest (2.16) unstable; urgency=medium
* adt-buildvm-ubuntu-cloud: Use "-monitor null" instead of "-monitor none",
as the latter does not work with older Qemu versions.
* adt-virt-qemu: Don't call qemu-img with -q option, it doesn't exist in
older Qemu versions yet. Redirect stdout instead.
* tools/adt-setup-vm: Disable downloading of package translations to save
some bandwidth. Thanks Jean-Baptiste Lallement.
* adt-virt-qemu: Fix race condition that caused a ValueError when the exit
code file was not written yet.
* adt-virt-qemu: Automatically detect a normal user to run tests as, unless
-u is given. This works similarly to -lxc.
* Add tests for adt-virt-user with non-default users.
* adt-virt-qemu: Disable shared downtmp for now, it breaks on older Qemu
versions and the current setup does not work with different UIDs in the
testbed.
* adt-virt-qemu: Use file locks for host-side ssh port forwards to avoid
race condition.
* adt-run: Drop usage of dh_listpackages, it needs debhelper which is an
undeclared (and also unwanted) dependency. Parse debian/control directly
and make use of our existing arch tag resolution. (LP: #1312276)
* adt-virt-qemu: Copy host's timezone into VM to avoid time zone skew when
copying files.
* adt-virt-qemu: Show determined normal user instead of <user> in ssh
message, to get a fully copy&pasteable command.
* adt-virt-qemu: Ensure tests which run as root have $HOME set.
* Fix --proposed option to also apply to sources.list.d/* lists and to
multiple sources. (LP: #1313278)
* adt-buildvm-ubuntu-cloud: Install haveged, to avoid failing tests due to
running out of entropy.
* adt-virt-qemu: Add --qemu-options for passing additional options to QEMU.
Thanks Diogo Matsubara!
-- Martin Pitt <email address hidden> Sun, 27 Apr 2014 22:37:15 +0200
-
autopkgtest (2.15) unstable; urgency=medium
* Fix --apt-source mode to download the source with apt-get's
"--only-source" option, to actually get what we asked for.
* Add missing python3 build dependency for tests/adt-run. Fixes FTBFS of
backports.
* adt-buildvm-ubuntu-cloud: Add options to pass custom metadata/userdata.
Thanks Diogo Matsubara.
* Replace pbuilder-satisfydepends-classic with parsing and satisfying build
and test dependencies with libdpkg-perl and "apt-get -f install". This
gets rid of the pbuilder dependency and some nasty hacks like the
--internal-chrootexec script, and allows us to be more flexible such as
also supporting Recommends: installation. (LP: #1205110)
* Fix "specifiy" typo in error message. Thanks Jelmer Vernooij.
(Closes: #745413)
* adt-build-lxc: Stop using the -F template option to flush the cache as it
is not available in the debian template. Remove caches manually instead.
(Closes: #745415)
* adt-buildvm-ubuntu-cloud: Fall back to latest stable if there is no
development series.
* Add "needs-recommends" restriction for installation of recommended
packages for the test dependencies. This does not affect build
dependencies. (Closes: #708963)
-- Martin Pitt <email address hidden> Tue, 22 Apr 2014 09:10:40 +0200
-
autopkgtest (2.14.1) unstable; urgency=medium
* tools/adt-buildvm-ubuntu-cloud: Enable ssh login with passwords.
-- Martin Pitt <email address hidden> Wed, 09 Apr 2014 17:15:29 +0200
-
autopkgtest (2.13.1) unstable; urgency=medium
* Fix "--build-tree" typo in error message, and also add the missing
--unbuilt-tree. (Closes: #743427)
* lxc: Enable live output in clone mode.
-- Martin Pitt <email address hidden> Tue, 08 Apr 2014 12:18:00 +0200
-
autopkgtest (2.13) unstable; urgency=medium
* Split package/version list that got introduced in 2.10: Introduce a new
output file "testbed-packages" with the packages and versions of the
pristine testbed, and filter them out of "<testname>-packages", so that
the latter only contains the packages and versions that are specific to
that test. This is generally more useful, and how debci does/wants it.
-- Martin Pitt <email address hidden> Tue, 01 Apr 2014 14:43:12 +0100
-
autopkgtest (2.12) unstable; urgency=medium
[ Martin Pitt ]
New features:
* Add new options -s/--shell-fail for running a shell in the testbed after
every failed test, and --shell for running a shell in the testbed after
every test. This should make debugging tests or regressions quite a bit
simpler. This actually spawns a shell for the null, chroot, schroot, and
lxc runners, and shows how to login to the VM for qemu (this will
hopefully be improved in the future, but at least makes debugging possible
for now).
Bug fixes:
* adt-build-lxc: Fix apt proxy setting for ubuntu template; use $HTTP_PROXY,
not $APT_PROXY.
* Make PEP-8 failures non-fatal during package build. They often fail in
backports to old releases, and running them before releasing a new package
is sufficient.
* Filter out comment lines from control lines, as python-debian doesn't
properly do that (Debian #743174). Fixes lintian autopkgtest.
(LP: #1300031)
[ Antonio Terceiro ]
* adt-virt-schroot: Add new option -s/--session-id for specifying a custom
schroot session id. This is useful for debugging test suites that go crazy
on ci.debian.net, so you can `schroot --list --all-sessions` and see which
sessions are still open.
-- Martin Pitt <email address hidden> Mon, 31 Mar 2014 11:45:13 +0200
-
autopkgtest (2.11) unstable; urgency=medium
* Add tools/adt-setup-vm: Setup script for vmdebootstrap (and potentially
others) to start a root shell on tty1, set up networking for eth0, and
enable deb-src apt sources.
* adt-virt-qemu.1: Describe how to create a suitable Debian VM with
vmdebootstrap.
* doc/README.package-tests: Point out to use "build-needed" with
consideration.
* Make installation of packages/dependencies print a warning instead of
failing immediately when root is not available on the testbed. This allows
tests to be run with the "null" runner locally as user with some
restrictions. Check if dpkg-source is available before installing
dpkg-dev, to avoid the warning in that simple case. (Closes: #742242)
* Fix ugly error message if a package does not have a debian/tests/
directory. Properly fail with code 8 and "SKIP no tests in this package".
* Clean up temporary files in NullRunner tests.
-- Martin Pitt <email address hidden> Fri, 21 Mar 2014 09:36:25 +0100
-
autopkgtest (2.10) unstable; urgency=medium
* Record name and version of tested package in log and in
output-dir/testpkg-version. (first part of LP #1292431)
* Record installed packages and their versions for each test, in
<output-dir>/<test>-packages. (second half of LP: #1292431)
* Drop adt-testreport-*, adt-openbugs-*: These have been marked deprecated
for a while, haven't been used or maintained in many years, and are
superseded by jenkins/debci. (Closes: #695974)
-- Martin Pitt <email address hidden> Tue, 18 Mar 2014 16:12:24 +0100
-
autopkgtest (2.9.2) unstable; urgency=medium
* VirtSubproc.py, copydown_shareddir(): Fix "src and dest are the same file"
error when file is already in the shared downtmp.
* VirtSubproc.py, copydown_shareddir(): Remove already existing target
directory to avoid copying an updated directory into the old one.
* adt-run: Show timestamps at the beginning, start of preparation (i. e.
mostly installing dependencies), and start and end of tests.
(LP: #1290760)
* Run NullRunnerNoRoot tests during package build. Add python-debian build
dependency for that.
-- Martin Pitt <email address hidden> Wed, 12 Mar 2014 08:13:50 +0100
-
autopkgtest (2.9.1) unstable; urgency=medium
[ Martin Pitt ]
* doc/README.package-tests: Clarify syntax of test Depends:, and point to
the relevant Debian Policy specification.
* adt-build-lxc: Fall back to assuming /var/lib/lxc/ as container directory
if lxc-config does not exist. It was introduced in 1.0, but Debian
unstable still has 0.9. (Closes: #740437)
* tests: Extend test_artifacts() to multiple tests writing artifacts, also
with overwriting existing files and writing into subdirs.
* VirtSubproc: Fix copyup_shareddir() to get along with existing
directories. (LP: #1288668)
* settings.make: Switch default prefix to /usr, as our scripts hardcode that
for finding VirtSubproc.py and this is a native package. (LP: #1287264)
[ Steve Langasek ]
* Fix adt-virt-schroot to correctly return root-on-testbed when we're
running adt-run as root. (Closes: #740868)
-- Martin Pitt <email address hidden> Thu, 06 Mar 2014 13:44:07 +0100
-
autopkgtest (2.9) unstable; urgency=low
New features:
* Add "downtmp-host=<path>" testbed capability, for runners which can set up
a shared directory between host and testbed. This is used by copyupdown to
more efficiently copy files back and forth, and in many/most cases, don't
explicitly copy anything at all.
* Introduce a new testbed capability "downtmp-shared-fifo" that declares
that testbed and the host can use a FIFO in the shared downtmp for
communication. Use this to generalize live test output to all runners
which declare that, not just -null.
* Convert null, chroot, schroot, lxc, and qemu runners to use a shared
downtmp dir. Note that qemu does not support FIFO (through the 9p file
system), so that one does not get live test output.
* Don't define $TMPDIR for tests any more. Having $TMPDIR in the shared dir
isn't efficient and even breaks some tests (as they might not be able to
put sockets etc. into it), and it's an artificial difference to the
default system behaviour of just using /tmp. The documentation already was
changed a long time ago to only document $ADTTMP as a scratch directory
for tests.
* Add test restrictions "isolation-container" and "isolation-machine", and
corresponding testbed capabilities. Tests can use that to declare that
they want to start services or open ports (i. e. a simple chroot/schroot
is insufficient) or access hardware, reboot, and interact the kernel
(where even a container is insufficient), and will be skipped instead of
failing when they run in a virtualization server which does not provide
enough isolation.
* Add manpage for adt-build-lxc script.
* Ship adt-build-lxc script and its manpage in the package.
Documentation updates:
* doc/README.package-tests: Some stylistic updates, and add section headers.
* adt-virt-lxc.1: Point to, and show how to use adt-build-lxc.
* Add doc/README.running-tests: Overview of how to run adt-run, most common
scenarios, and available virtualization servers with their pros/cons.
Bug fixes:
* tests: Copy tests/home/ into a temporary dir and set $HOME to that, to
avoid cluttering the source dir.
* Don't produce empty stderr/stdout files with --output-dir. (LP: #1282866)
* adt-buildvm-ubuntu-cloud: Install linux-generic, to get the full kernel
(needed for e. g. udisks2 to get scsi_debug).
* tests: Add a broken symlink to testpkg, to ensure that copying trees
around gets along with those.
* adt-run: Always use fakeroot with adt-virt-qemu, to work around chown
failing on 9p.
* xen/initscript: Always source /lib/lsb/init-functions. (Thanks lintian)
* tests/adt-run: Increase timeout in NullRunner.test_timeout_long_build to
avoid failure on slow architectures.
* adt-build-lxc: Properly wait for finished container boot instead of a
static 10 second sleep.
* adt-build-lxc: Only flush the cache when updating an existing container.
-- Martin Pitt <email address hidden> Thu, 27 Feb 2014 11:23:32 +0100
-
autopkgtest (2.8.1) unstable; urgency=medium
* Use the install timeout instead of the short one for
--setup-commands/--apt-upgrade.
* Fix --apt-upgrade to not hang on dpkg conffile prompts.
* Use ./tests/home/ as $HOME during tests, and add a gpg key to it so that
we don't have to generate one (which often hangs due to lack of entropy).
* Make the test suite run as user, skip tests which require root (all
ChrootRunner and most NullRunner tests).
-- Martin Pitt <email address hidden> Fri, 21 Feb 2014 17:15:41 -0800
-
autopkgtest (2.8) unstable; urgency=medium
* Add adt-virt-qemu: Virtualization server using QEMU. This provides even
more isolation than containers and thus is able to run tests which
interact with the kernel. See the manpage for the requirements that VMs
need to satisfy, and how to use it. (Closes: #719215)
* Add adt-buildvm-ubuntu-cloud: This tool downloads an Ubuntu cloud image
and configures it for autopkgtest. See its manpage for how to use it.
* adt-run: Stop using a $TMPDIR for package builds. It's unnecessary
overhead, and causes problems with dpkg-deb if it is on e. g. a 9p file
system.
* Allow the virt-server argument to be given without the common "adt-virt-"
prefix, for brevity. Update the manpage accordingly, and also move
virt-server into its own heading instead of burying it in the middle of
"other options".
* tests: Show stderr output if adt-run unexpectedly fails.
* Fix endless recursion when an error happens during resetting apt.
* tests: Fix skip message if no container is given; it does not need to be
an Ubuntu cloud container any more.
* Add tools/adt-build-lxc: Script to create or upgrade a Debian/Ubuntu
container, suitable as a daily cron (or Jenkins) job. Not shipped in
package for now.
* Allow --setup-commands to be given multiple times.
* Add -U/--apt-upgrade option to run apt-get update/dist-upgrade before
running the test.
* Add --apt-pocket <pocket> option to create an additional apt source for
release-pocket.
-- Martin Pitt <email address hidden> Mon, 17 Feb 2014 21:00:58 -0800
-
autopkgtest (2.7.2) unstable; urgency=medium
* debian/copyright, CREDITS: Bump copyright year.
* Eliminate lib/Autopkgtest.py, use pipes.quote() instead of shellquote_*().
* Drop doc/README.schroot-setup. Using LVM for schroot overlays is not
recommended as it is too slow and also too hard to set up. You should
rather use overlays or unpacked tarballs on tmpfs. Adjust
adt-virt-schroot.1 to point to mk-sbuild(1) instead.
* CREDITS: Remove license information, it does not belong there and we don't
need that any more as debian/copyright file.
* adt-testreport-*, adt-openbugs-*: Add warning that these scripts are
unmaintained and deprecated in favour of http://ci.debian.net, debci,
and/or jenkins. If you still use them, please mail
<email address hidden>!
* README.package-tests: Document that @builddeps@ also installs make.
(Closes: #738129)
* Add Suggests: for schroot and lxc, and explain those in the package
description.
* NullRunner.test_timeout_long_test: Increase (unrelated) build timeout from
3 to 20 s, to cope with the bit of overhead that dpkg-buildpackage
introduced.
-- Martin Pitt <email address hidden> Sun, 09 Feb 2014 19:31:34 +0100
-
autopkgtest (2.7.1) unstable; urgency=medium
* VirtSubproc.py, command(): Intercept/retry on EAGAIN.
* runner/adt-run: Robustify cleanup of empty "binaries" output directory, it
does not always work in __del__().
* adt-run: Replace direct invocation of "debian/rules build" with
"dpkg-buildpackage -us -uc -b". dpkg-buildpackage is the de-facto
interface these days (also on the buildds), and does additional things now
such as passing build flags or cleaning the package. This also implies
dpkg-source --before build to apply patches, so remove the explicit call
to that again. (Closes: #737632)
* adt-run: If all tests get skipped, but there are some tests, don't claim
that there are none. (Closes: #737242)
* adt-run: When expanding @builddeps@, add "make" as test almost always need
it to call "make installcheck" or similar.
* Print package version as first adt-run message ("@devel@" when running out
of source tree).
* Turn VirtSubproc.Timeout into a proper exception class (RuntimeError).
* Make VirtSubproc.bomb() useful outside the mainloop, so that we can
use it in utility functions that are used outside of runners.
* VirtSubproc: Add a "timeout" context manager which plumbs timeout_start(),
timeout_end() and bomb() (if an exit message is given) or a Timeout
exception (otherwise) together in the right way, for convenience.
-- Martin Pitt <email address hidden> Fri, 07 Feb 2014 14:52:42 +0100
-
autopkgtest (2.7) unstable; urgency=medium
* adt-virt-lxc: Drop all the file-based checks for container bootup, and
replace with "lxc-attach runlevel" to wait until the container booted to a
numeric runlevel. This greatly simplifies the logic and drops the
cloud-init requirement so that this runner is now suitable for Debian or
debootstrap-based Ubuntu containers. (LP: #1273725)
* adt-virt-lxc.1: Drop --gain-root in notes/example. It's unnecessary
(adt-run will install fakeroot if missing) and confusing (as it's not
related to LXC specifically and otherwise not really used/useful).
* adt-virt-lxc.1: Add example how to create a Debian container, and some
cleanup of obsolete commentary.
* adt-virt-lxc: Add -s/--sudo option to run lxc-* commands through sudo; use
this option if you run adt-run as normal user, but need to run the
container itself as root (if you use LXC system-level containers).
This drops the hardcoded sudo commands and thus the dependency on sudo,
which is more palatable for Debian. (LP: #1273977)
* adt-virt-lxc: Add -e shortcut for --ephemeral, as this is an option which
you pretty much always want.
* adt-virt-lxc.1: Move more important options to the top.
* adt-virt-lxc: Stop hardcoding the "ubuntu" suggested normal user; instead,
call "getent passwd" to detect the first user with uid >= 500. Don't
advertise suggested-normal-user if none exists.
* adt-run: Rearrange finalizing options and reading capabilities to happen
after testbed opening. That allows the testbed to determine its full
capablities in its open hook.
* adt-run: Call dpkg-source --before-build for --unbuilt-tree arguments, to
ensure that patches are applied for "3.0 (quilt)" source trees. This is
useful to test *-buildpackage source trees where patches don't get
applied. (LP: #1212208)
-- Martin Pitt <email address hidden> Fri, 31 Jan 2014 11:14:32 +0100
-
autopkgtest (2.6.1) unstable; urgency=medium
* adt-virt-lxc: Call lxc-config through sudo as well like all the other LXC
commands. This fixes running adt-run as user with the LXC runner.
* adt-run: For copydown(), always chown the testbed files to the non-root
user (if available). This fixes a "Permission denied" error with the
schroot or LXC runners and --unbuilt-tree if the source tree has tight
permissions. (LP: #1266811)
* Adjust LxcRunner.test_tree_built_binaries to also work with current apt
(similar to commit 5798b7f for the schroot runner).
* adt-virt-lxc: Call "sudo test" and "sudo readlink" instead of os.lexists()
and os.readlink() as recent LXC now makes the default container dir
/var/lib/lxc not readably by non-users. Fixes running adt-virt-lxc/adt-run
as user. (LP: #1266809)
* Add test for --binary with --built-tree.
* adt-run.1: Clarify and fix some wrong and misleading documentation what
happens with debs produced by source packages and specified with --binary.
(LP: #1175557)
-- Martin Pitt <email address hidden> Wed, 29 Jan 2014 06:53:16 +0100
-
autopkgtest (2.6) unstable; urgency=medium
New features:
* Add --apt-source option as an alternative for --source, implied if
argument is a valid package name. It calls "apt-get source" in the testbed
instead of using a .dsc from the host, which for the common case of
testing packages in the acual archive avoids having to manually download
the source and then copying it into the testbed. This simplifies the
command line for running tests for a package in the archive to
"adt-run mypkgname --- adt-virt-[...]".
* Add --setup-commands option to run things like "apt-get update" or adding
apt sources after opening the testbed.
Bug fixes:
* adt-virt-lxc: Stop assuming that containers live in /var/lib/lxc/; ask
lxc-config about the root path instead.
* Only reset the test bed after the build stage if builds actually happened.
* Reset the test bed after running a test group, to avoid an unnecessary
setup if there is just one test.
* Don't put an empty "binaries" directory into the output directory.
New test cases:
* --timeout handling.
-- Martin Pitt <email address hidden> Thu, 23 Jan 2014 17:19:11 +0100
-
autopkgtest (2.5.6) unstable; urgency=medium
* Adjust "su" calls to explicitly specify /bin/sh as shell, as recent
base-passwd disables them now for system users. (Closes: #734740)
-- Martin Pitt <email address hidden> Thu, 09 Jan 2014 15:21:44 +0100
-
autopkgtest (2.5.5) unstable; urgency=medium
* Test that the schroot runner installs packages with --user, and that it
runs the tests as root with --user if the test has a "needs-root"
restriction. (Related to #728304)
* adt-virt-schroot: Add suggested-normal-user capability to the calling user
(unless that's root), so that tests are run as user by default.
(Closes: #728304)
* Add support for virtual "@builddeps@" test dependency, which will be
replaced with the package's B-D and B-D-I. Document in
doc/README.package-tests. (Closes: #720458)
-- Martin Pitt <email address hidden> Wed, 25 Dec 2013 21:12:38 +0100
-
autopkgtest (2.5.4) unstable; urgency=medium
* Only clean up binary if we built them ourselves. adt-run previously
removed debs specified with --binary.
-- Martin Pitt <email address hidden> Thu, 19 Dec 2013 16:18:03 +0100
-
autopkgtest (2.5.3) unstable; urgency=low
* Drop hosts/ and {onepackage,ubuntu}-config example files; these scripts
haven't been used nor maintained in years, and we won't need them anytime
soon. Ubuntu does, and Debian plans to drive autopkgtest from britney
and/or Jenkins, not from cron.
* Move adt-testreport-* scripts and manpages into autopkgtest-xenlvm
package, as they require the xen runner.
* tests/run-parallel: Immediately stop on pep8/pyflakes errors.
* Adjust SchrootRunner.test_tree_built_binaries test to also work with
current apt.
* Always write UTF-8 to stdout and summary stream, to avoid
UnicodeEncodeError crash when running in a C locale. (LP: #1259529)
* tests/pyflakes: Always use pyflakes, not pyflakes3, as the latter doesn't
get along with non-ASCII strings when running under a non-UTF-8 locale (as
in sbuild).
-- Martin Pitt <email address hidden> Wed, 11 Dec 2013 08:45:07 +0100
-
autopkgtest (2.5.2) unstable; urgency=low
* virt-subproc/adt-virt-lxc: Fix PEP-8 error.
* Explicitly kill the logging tee processes, for backwards compatibility
with Python 2.6.
* Avoid assertNotRegex() in test suite as it isn't yet available in Python
3.1.
* Skip dependency version check instead of crashing if python-debian does
not provide NativeVersion() (for wheezy/lucid).
* Fix some minor PEP-8 errors.
-- Martin Pitt <email address hidden> Fri, 29 Nov 2013 18:07:09 +0100
-
autopkgtest (2.5.1) unstable; urgency=low
* adt-virt-lxc: Drop some dead code.
* Fix ownership of test tree with --user option.
-- Martin Pitt <email address hidden> Tue, 26 Nov 2013 10:43:30 +0100
-
autopkgtest (2.5) unstable; urgency=low
Behaviour changes:
* Drop --output-dir option. It has never really been useful as it only works
for paths in the testbed, has a confusing semantics, is redundant with
--tmp-dir, and currently even crashes adt-run. (Closes: #729790)
* Rename --tmp-dir option to --output-dir, as its main purpose is really to
collect test artifacts. Keep --tmp-dir alias for backwards compatibility.
* Drop --override-control option. It complicates the code too much for its
very limited utility, and it was not even documented in the manpage.
* Drop --paths-testbed (and thus also --paths-host) options. There is no
use case for them.
* Add short options for common command line options: -B for
--no-built-binaries, -o for --output-dir, -l for --log-file,
-u for --user.
* Clean up uninteresting files from --output-dir directory.
* Tests which want to create additional artifacts can now put them into the
$ADT_ARTIFACTS directory. When using the --output-dir option, they will be
copied into <outputdir>/artifacts/. Document this new feature in
README.package-tests. (LP: #1137763)
Packaging changes:
* Drop obsolete autodebtest Conflicts/Replaces.
* Update copyright years.
* Bump Standards-Version to 3.9.5. No changes necessary.
* CREDITS: Add myself.
* Makefile: Support $DESTDIR, like automake.
* Adjust sharedir* defaults in settings.make to what we actually want, and
drop their overrides in debian/rules
* Move debian/rules to using dh.
* Add ./run-from-checkout script to run adt-run from the git checkout or
source package. Change tests/adt-run to use it.
* Add tests/run-parallel to run tests for different runners in parallel.
Bug fixes:
* Fix OSError crash if --output-dir/--tmp-dir does not exist.
(Closes: #729791)
* Pass line number to Test constructor argument, to be able to report proper
errors instead of crashing. (side issue in #698551)
* Fix exit code for "Unsupported" error.
* When encountering an unsupported test, report only this test as skipped,
not all the others in the same "Tests:" stanza.
* README.package-tests: Test names must not contain '/'. (Closes: #698551)
* Create manpage for adt-virt-schroot. (first half of #695974)
* Fix "su: must be run from a terminal" failure when running as user and
testbed doesn't provide root-on-testbed. (Closes: #648148)
* Add bandaid to avoid mixing order of stdout and stderr in the log file
when reporting results.
Code cleanup:
* Simplify logging by dropping the explicit functions for writing to stderr
plus log, and instead set up pipes so that the whole stdout/stderr will be
tee'd into the logfile.
* Replace the usage of the AutoFile classes (which are underdocumented,
magic, and hard to understand) with a more explicit and much simpler
TestbedPath class.
* Stop installing the redundant /etc/apt/apt.conf.d/90autopkgtest into
testbeds, and simplify invocation of apt-get.
New test cases:
* Access /dev/std{out,err} in a non-root test, like the "mafft" autopkgtest
does.
* --log-file test cases for chroot and schroot runners.
* schroot and LXC runner test cases for installing built binaries.
* --output-dir in schroot runner with complete package build.
* Recommends do not get installed by default.
* Test case with '/' in the name.
* --user option for schroot and null runners.
* breaks-testbed restriction for all runners.
-- Martin Pitt <email address hidden> Mon, 25 Nov 2013 07:31:22 +0100
-
autopkgtest (2.4) unstable; urgency=low
* Add adt-virt-lxc test runner, many thanks to Robie Basak for this! This
runner provides "revert" and "revert-full-system" capabilities which is
useful for packages which have the "breaks-testbed" restriction and
multiple tests. For the time being this only works with the ubuntu-cloud
template; support for general debian/ubuntu containers requires an
lxc-wait mechanism ("did the container finish booting?") and getting along
with the different user setups (debian using "root", ubuntu using an
"ubuntu" user with sudo capabilities).
* Add tests for adt-virt-lxc.
* Code cleanup to slightly improve readability:
- Drop two-letter aliases for methods.
- Consistent usage of quotes.
- Drop orphaned/unnecessary globals.
- Consistent logging methods/object names, add some docstrings.
* Install fakeroot into testbed for "build-needed". Thanks Jean-Baptiste
Lallement! (Closes: #726714, LP: #1241456)
* Create testtmp directory with 0755 permissions to fix failure with tight
umasks. Thanks Arthur de Jong! (Closes: #728057)
* Allow test control Depends: to have a trailing comma. Thanks Jean-Baptiste
Lallement for the patch!
* Make test stdout re-appear in --log-file file for realtime output.
-- Martin Pitt <email address hidden> Mon, 28 Oct 2013 11:25:30 +0100
-
autopkgtest (2.3.8) unstable; urgency=low
* Skip ChrootRunner test if running under cowdancer, as chrooting in
cowdancer doesn't work.
* Fix endless bomb/stop loop if the virt runner fails and exits
unexpectedly.
* adt-virt-schroot: Add some debugging output of the schroot config.
* Fix OSError crash with real-time output when running adt-run as non-root
on the host, and the runner bind-mounts /tmp (such as -schroot), in which
case the temporary runner dir isn't accessible to the host. This is a
quickfix, eventually we should make real-time output work properly in this
situation.
* Show stderr also for non-zero exit codes.
* Restrict live stdout/stderr to the null virt runner for now, as it does
not work properly with the schroot runner even if /tmp gets bind-mounted.
* Add tests for the schroot runner. Ad building a schroot would be too
expensive for a test, use an existing schroot if $ADT_TEST_SCHROOT is set,
otherwise skip the tests.
* Show stderr for all non-null runners with "allow-stderr".
-- Martin Pitt <email address hidden> Wed, 16 Oct 2013 14:55:39 +0200
-
autopkgtest (2.3.7) unstable; urgency=low
* tests/adt-run: Factorize a base test class with common functionality.
* lib/VirtSubproc.py, downtmp_mktemp(): Create temporary directory in the
target (which isn't the host for anything but the null runner), to fix the
schroot/chroot runners for directories.
* Only show stdout/stderr in realtime if tests run in the same file system
as the host, as otherwise we cannot create/use a named pipe. If not, fall
back to the old way of just showing the complete stdout/stderr after the
tests finished. (LP: #1235189)
* Add some test cases for adt-virt-chroot.
* Add new --timeout-copy option to make copy timeout configurable. Pass that
down to adt-virt-* via the environment ($ADT_VIRT_COPY_TIMEOUT).
(LP: #1200693)
* Fix tests to also work with Python 3.1.
* tests/testpkg: Go back to compat level 7 so that this also works on older
Debian/Ubuntu releases.
-- Martin Pitt <email address hidden> Tue, 08 Oct 2013 18:55:33 +0200
-
autopkgtest (2.3.6) unstable; urgency=low
* Always kill the tee children after a test finishes, to avoid race
condition when they get stuck in a read() call which doesn't return with
"no data".
* Fix pyflakes failure on older Debian/Ubuntu releases.
* Fix PEP-8 errors.
-- Martin Pitt <email address hidden> Thu, 26 Sep 2013 13:12:11 +0200
-
autopkgtest (2.3.5) unstable; urgency=low
* Don't show source_rules_command() "set -x" trace unless running with -d.
* Kill the tee child process if the testbed bombs out (e. g. due to a
timeout), to avoid hanging eternally. Add test case for --timeout-test
handling.
* Add test case for --summary option.
-- Martin Pitt <email address hidden> Wed, 25 Sep 2013 08:51:21 +0200
-
autopkgtest (2.3.4) unstable; urgency=low
* Add tests/testpkg/: Simple source package for testing autopkgtest.
* Add tests/adt-run: Automatic regression tests for adt-run, covering/using
the null runner.
* Add debian/tests: autopkgtest for autopkgtest, using tests/adt-run.
* Make topmost temporary directory group/world-readable and make $ADTTMP
have appropriate 1777 permissions so that users other than root can
actually use it. (Closes: #722458)
* Don't clip first stderr line to 35 characters in summary. (Side issue in
#722457)
* Don't show shell tracing of script that creates the temporary directories.
* Move unimportant messages to debug level 1, to not clutter up default
output so much.
* Drop unnecessary "trace: " from adt-run debug/progress lines.
* Show stdout/err of the running tests in realtime, which is much nicer for
watching. Don't split that realtime output, so that stderr messages appear
in the right context. Show separate stderr if and only if the allow-stderr
restriction is not set and there is stderr output. (Closes: #722457)
* For tests with "build-needed", actually run the tests in the built
directory, not in the original unbuilt tree. (Closes: #711209)
* Fix various unknown and unused symbols throughout the source, spotted by
pyflakes.
* Add tests/pyflakes: Run pyflakes over source and test code.
* Add tests/pep8: Run pep8 over source and test code.
* Support empty "Depends:" test control field, installing no dependencies in
that case.
* README.package-tests: Point out that you can use upper-case test names as
well. Update test_tree_tmp_dir() test to use these, to ensure it stays
working. (Closes: #711844)
* Some code cleanups:
- Don't rename modules on import.
- Format to be PEP-8 compliant.
- Rename first argument of methods to "self", as that's the wide
convention, gets rid of some single-letter variable names, and makes it
a bit easier to see which variables refer to foreign objects.
* Run tests/pep8 and tests/pyflakes during package build.
-- Martin Pitt <email address hidden> Mon, 23 Sep 2013 14:44:13 +0200
-
autopkgtest (2.3.3) unstable; urgency=low
* runner/adt-run: Drop "errors" keyword from decode() call to fix
compatibility with earlier Python versions. Thanks Christoph Berg.
* adt-run: Fail tests if they exit with nonzero if "allow-stderr"
restriction is set. Thanks Robie Basak! (LP: #1210503)
-- Martin Pitt <email address hidden> Mon, 09 Sep 2013 15:49:52 -0400
-
autopkgtest (2.3.2) unstable; urgency=low
* runner/adt-run: Fix "allow-stderr" restrictions to still report success,
so that this gets into the summary.log.
-- Martin Pitt <email address hidden> Fri, 26 Jul 2013 12:41:07 +0200
-
autopkgtest (2.3.1) unstable; urgency=low
* adt-run: Support older python-debian versions whose module was still
called "debian_bundle". (Closes: #717191)
* runner/adt-run: Correctly re-raise exception on some register failure
errors. Thanks Robie Basak!
* runner/adt-run: Short-circuit publishing if there are no registered built
binaries. This is the step that takes by far the longest time for short
tests, and thus speeds up test running significantly.
* runner/adt-run: Set DEBIAN_FRONTEND=noninteractive for installing build or
test dependencies, too. Thanks Robie Basak! (LP: #1204989)
-- Martin Pitt <email address hidden> Fri, 26 Jul 2013 08:02:35 +0200
-
autopkgtest (2.3) unstable; urgency=low
* runner/adt-run.1: Fix bad "affect modify" wording. (LP: #1199500)
* Drop hosts/chinstrap. We haven't actually used this in many years, it has
been replaced with https://launchpad.net/auto-package-testing, Jenkins,
and blocking migration to release until tests pass. (LP: #381210)
* Promote apt-utils from Recommends to Depends:, to avoid test failures due
to not finding apt-ftparchive. (LP: #1065874)
* Promote pbuilder from Recommends: to Depends:, as we always call
pbuilder-satisfydepends-classic. (LP: #1065874)
* runner/adt-run: Stop explicitly checking for $HOME (with broken error
message) when giving --gnupg-home, use os.path.expanduser() instead.
(LP: #1065873)
* runner/adt-run: Fix timeout --help output.
* runner/adt-run: Fix bomb() to clean up the testbed before removing it.
Afterwards (in cleanup()) we don't have a testbed object any more to run
commands in. (LP: #1157292)
* runner/adt-run: Fix UnicodeDecodeError crash if stderr contains non-ASCII
characters. (LP: #1100283)
* Add "allow-stderr" restriction for tests where re-routing or disabling
stderr is impractical. (LP: #1197005)
* runner-adt-run: Support architecture specifiers in Depends: field.
(LP: #1165128)
* runner/adt-run: Remove/fix some unused variables, spotted by pyflakes.
-- Martin Pitt <email address hidden> Fri, 19 Jul 2013 11:58:15 +0200
-
autopkgtest (2.2.5) unstable; urgency=low
[ Jean-Baptiste Lallement ]
* Fix call to atmostone(), so that Tests-Directory: actually works.
-- Martin Pitt <email address hidden> Thu, 11 Jul 2013 06:54:29 +0200
-
autopkgtest (2.2.4) unstable; urgency=low
[Jean-Baptiste Lallement]
* Fix failure with "permission denied" with option --user. Closes: #686292,
LP: #1084116
* Use debian.deb822 Python module to parse control files. This fixes parsing
of folded dependencies. Closes: #695797, LP: #1073856
* Support versioned dependencies in debian/tests/control.
Closes: #693540, LP: #1164362
[ Martin Pitt ]
* Add myself as a co-maintainer, as per mailing list discussion.
* Add machine-readable debian/copyright as per current 1.0 standard. Remove
dynamic creation of debian/copyright from debian/rules.
* Move from deprecated dh compat level 4 to 8 (supported in squeeze).
* debian/rules: Use dh_installdocs to install copyright file instead of
custom shell code.
* debian/control: Add missing ${misc:Depends}.
* Bump Standards-Version to 3.9.4.
-- Martin Pitt <email address hidden> Thu, 27 Jun 2013 13:49:25 +0200
-
autopkgtest (2.2.3+nmu1) unstable; urgency=medium
* Non-maintainer upload.
* adt-run: Catch EXDEV. Closes: #696625.
-- Christoph Berg <email address hidden> Thu, 31 Jan 2013 10:31:56 +0100
-
autopkgtest (2.2.3) unstable; urgency=medium
[ Martin Pitt ]
* Make `@' in tests' Depends work even if we're not building the
source tree. Closes: #678359. This is an important bugfix.
-- Ian Jackson <email address hidden> Sun, 08 Jul 2012 23:15:42 +0100
-
autopkgtest (2.2.2) unstable; urgency=low
[ Martin Pitt ]
* Fix hashbang lines to use python instead of python2.6, and update
debian/control to only depend on python (>= 2.6) instead of python2.6.
Closes: #644332.
-- Ian Jackson <email address hidden> Thu, 28 Jun 2012 01:03:02 +0100
-
autopkgtest (2.2.0) unstable; urgency=low
* Provide tests with ADTTMP rather than TMPDIR.
Well, actually, that's just according to the spec. In reality, for
backward compatibity, we provide each test script with both (pointing
to different directories so that tests don't need to worry about
possible filename clashes between ADTTMP and TMPDIR).
-- Ian Jackson <email address hidden> Fri, 15 Jun 2012 02:05:54 +0100
-
autopkgtest (2.1.0) unstable; urgency=low
Bugfixes:
* Remove our strange apt config on exit.
Partial fix to #648142, from Timo Lindfors.
* Suppress apt-listbugs and apt-listchanges. Michael Prokop.
* Fix parsing of "@" dependencies. Colin Watson. Closes: #667022.
* Fix NameError re "f" in restriction parsing.
Martin Pitt. Closes: #647882.
* Improve handling of schroot root-users and root-groups.
Colin Watson. Closes: #667001.
* Correctly handle quoting of copyup/copydown filenames. Fixes
but where we couldn't cope with packages' filenames containing
+ and ~. Report from Martin Pitt. Closes: #648161.
Documentation fixes:
* Clarify the spec to say that copyup/down takes encoded filenames.
* Fix the spec to refer to `breaks-testbed' rather than `breaks-computer'.
Report from Jakub Wilk. Closes: #669721.
* Manpage should refer to `*' in tests file's Depends field, not `@'.
Report from Jakub Wilk. Closes: #670648.
Packaging fixes:
* Add Recommends against pbuilder, whose dependency resolver adt-run
uses.
* Remove runner/tmp on debian/rules clean, and add it to .gitignore,
for convenience.
-- Ian Jackson <email address hidden> Mon, 11 Jun 2012 02:05:49 +0100
-
autopkgtest (2.0.1) unstable; urgency=medium
* Bugfixes:
- Python backtrace (no method "bomb") on bad tests/control syntax.
- Permit tests/control fields with medial capital letters.
- Do not duplicate previous stanzas (closes: #637333).
- Make adt-run --quiet work (closes: #637350).
- Make "build-needed" restriction work (closes: #637353).
- Fix a debugging message which was spuriously sent to stderr.
* Change Maintainer to the new list and move me to Uploaders.
-- Ian Jackson <email address hidden> Sat, 27 Aug 2011 11:21:29 +0100
-
autopkgtest (2.0.0) unstable; urgency=medium
* Incompatible test declaration spec changes: - no-build-needed is now the default; build-needed is a Restriction that tests which need it have to declare. * Incompatible virtualisation server spec changes: - print-execute-command replaced by print-{auxverb,shscript}-command. - "revert" capability split into "revert" and "revert-full-system" * New adt-virt-schroot for driving schroot. Sorry, no manpage yet. * New README.schroot-setup. * Remove dependency on python in testbed. * Update python version to 2.6. * Spec wording improvements, clarifications, editorial changes, etc. * Many bugfixes, including: - replace Python string exceptions (closes:#585226). - fix some broken formatting in adt-run manpage (closes:#636034). - fix adt-virt-chroot for simple chroots (closes:#520066). -- Ian Jackson <email address hidden> Sat, 30 Jul 2011 17:57:27 +0100
-
autopkgtest (1.2.0+nmu1) unstable; urgency=low
* Non-maintainer upload, to drop Python 2.4; thanks to Luca Falavigna for the
report and to Jakub Wilk for the patch; Closes: #562408
- debian/control
+ Depends on 'python (>= 2.4)'
- runner/adt-run, virt-subproc/adt-virt-*
+ uses the default Python interpreter instead of hard-coding python2.4;
also Closes: #548985
-- Sandro Tosi <email address hidden> Tue, 12 Jan 2010 00:52:25 +0100
-
autopkgtest (1.2.0) unstable; urgency=medium
Packaging changes:
* autopkgtest-xenlvm depends on adns-tools | libadns1-bin,
as the latter is renamed to the former in lenny. Closes:#490763.
* .bzrignore improvements.
* Maintainer is now Ian Jackson <email address hidden> -
ie I am hijacking this package from my other hat, so to speak.
adt-xenlvm changes:
* support for swap, defaulting to 5G.
This will break existing setups with insufficient LVM space.
* allow specification of LVM PVs to use.
* remove spurious mkdir of empty variable $snap.
* with-testbed: sleep 1 after xm destroy, as the latter is racy.
Configuration updates:
* hosts/magrathea/*: configuration as for pre-deployment tests
* adt-testreport-{cronjob,runloop}: new GO_ANYWAY arrangements
* adt-testreport-onepackage: default is not to upload (publish) sources
-- Ian Jackson <email address hidden> Wed, 27 Aug 2008 22:33:24 +0100
