I conducted a fresh install of xubuntu on a compaq persario 1200 and following I can not see my CD ROM drive. Device manager sees the drive and lists it correctly however places does not. It is listed in the fstub file however I understand that it should be mounted dynamically by HAL. mount -a command retruns nothing and I do not know what to do to reinstall the drive. presario description: Computer width: 32 bits *-core description: Motherboard physical id: 0 *-memory description: System memory physical id: 1 size: 311MiB *-cpu product: Pentium III (Coppermine) vendor: Intel Corp. physical id: 2 bus info: cpu@0 version: 6.8.6 size: 800MHz width: 32 bits capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pse36 mmx fxsr sse up *-cache:0 description: L1 cache physical id: 0 size: 32KiB *-cache:1 description: L2 cache physical id: 1 size: 256KiB *-pci description: Host bridge product: VT8601 [Apollo ProMedia] vendor: VIA Technologies, Inc. physical id: 100 bus info: pci@0000:00:00.0 version: 05 width: 32 bits clock: 33MHz configuration: driver=agpgart-via resources: irq:0 memory:f8000000-fbffffff(prefetchable) *-pci description: PCI bridge product: VT8601 [Apollo ProMedia AGP] vendor: VIA Technologies, Inc. physical id: 1 bus info: pci@0000:00:01.0 version: 00 width: 32 bits clock: 66MHz capabilities: pci bus_master cap_list resources: memory:f4100000-f57fffff memory:1c000000-1c0fffff(prefetchable) *-display UNCLAIMED description: VGA compatible controller product: CyberBlade i1 vendor: Trident Microsystems physical id: 0 bus info: pci@0000:01:00.0 version: 6a width: 32 bits clock: 66MHz capabilities: bus_master cap_list configuration: latency=64 resources: memory:f5000000-f57fffff memory:f4100000-f411ffff memory:f4800000-f4ffffff memory:1c000000-1c00ffff(prefetchable) *-isa:0 description: ISA bridge product: VT82C686 [Apollo Super South] vendor: VIA Technologies, Inc. physical id: 7 bus info: pci@0000:00:07.0 version: 22 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=parport_pc latency=0 resources: irq:0 *-ide description: IDE interface product: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE vendor: VIA Technologies, Inc. physical id: 7.1 bus info: pci@0000:00:07.1 version: 10 width: 32 bits clock: 33MHz capabilities: ide bus_master cap_list configuration: driver=pata_via latency=64 resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1420(size=16) *-usb description: USB Controller product: VT82xxxxx UHCI USB 1.1 Controller vendor: VIA Technologies, Inc. physical id: 7.2 bus info: pci@0000:00:07.2 version: 10 width: 32 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=uhci_hcd latency=64 resources: irq:11 ioport:1400(size=32) *-isa:1 description: ISA bridge product: VT82C686 [Apollo Super ACPI] vendor: VIA Technologies, Inc. physical id: 7.4 bus info: pci@0000:00:07.4 version: 30 width: 32 bits clock: 33MHz capabilities: isa cap_list configuration: latency=0 *-multimedia description: Multimedia audio controller product: VT82C686 AC97 Audio Controller vendor: VIA Technologies, Inc. physical id: 7.5 bus info: pci@0000:00:07.5 version: 20 width: 32 bits clock: 33MHz capabilities: cap_list configuration: driver=VIA 82xx Audio latency=0 resources: irq:9 ioport:1000(size=256) ioport:1434(size=4) ioport:1430(size=4) *-communication UNCLAIMED description: Communication controller product: HSF 56k Data/Fax Modem vendor: Conexant Systems, Inc. physical id: 9 bus info: pci@0000:00:09.0 version: 01 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=64 resources: memory:f4000000-f400ffff ioport:1438(size=8) *-pcmcia description: CardBus bridge product: PCI1410 PC card Cardbus Controller vendor: Texas Instruments physical id: a bus info: pci@0000:00:0a.0 version: 01 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 resources: irq:9 memory:1c100000-1c100fff ioport:1800(size=256) ioport:1c00(size=256) memory:14000000-17ffffff(prefetchable) memory:18000000-1bffffff *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:02:44:48:2c:d8 width: 32 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical configuration: broadcast=yes driver=8139too driverversion=0.9.28 ip=10.1.1.9 latency=64 maxlatency=64 mingnt=32 multicast=yes resources: irq:9 ioport:1800(size=256) memory:18000000-180001ff sudo dmesg [sudo] password for anthony: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 (Ubuntu 2.6.31-17.54-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000137f0000 (usable) [ 0.000000] BIOS-e820: 00000000137f0000 - 00000000137ffc00 (ACPI data) [ 0.000000] BIOS-e820: 00000000137ffc00 - 0000000013800000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x137f0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FFE000000 write-back [ 0.000000] 2 base 012000000 mask FFF000000 write-back [ 0.000000] 3 base 013000000 mask FFF800000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ea000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000137f0000 (usable) [ 0.000000] modified: 00000000137f0000 - 00000000137ffc00 (ACPI data) [ 0.000000] modified: 00000000137ffc00 - 0000000013800000 (ACPI NVS) [ 0.000000] modified: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000137f0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0013400000 page 2M [ 0.000000] 0013400000 - 00137f0000 page 4k [ 0.000000] kernel direct mapping tables up to 137f0000 @ 10000-15000 [ 0.000000] RAMDISK: 0e2eb000 - 0ea33691 [ 0.000000] ACPI: RSDP 000f72a0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 137fc7c0 00028 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 137ffb8c 00074 (v01 COMPAQ Wrangler 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 137fc7e8 033A4 (v01 Compaq Wrangler 06040000 MSFT 0100000B) [ 0.000000] ACPI: FACS 137fffc0 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 311MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 137f0000 [ 0.000000] low ram: 0 - 137f0000 [ 0.000000] node 0 low ram: 00000000 - 137f0000 [ 0.000000] node 0 bootmap 00011000 - 00013700 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00137f0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000e2eb000 - 000ea33691] RAMDISK ==> [000e2eb000 - 000ea33691] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac180] BRK ==> [00008a9000 - 00008ac180] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000014000] BOOTMAP ==> [0000011000 - 0000014000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000137f0 [ 0.000000] HighMem 0x000137f0 -> 0x000137f0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000137f0 [ 0.000000] On node 0 totalpages: 79743 [ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 592 pages used for memmap [ 0.000000] Normal zone: 75168 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000 [ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 13800000 (gap: 13800000:ec7e0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1272000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 79119 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=ce1d6551-6bb5-49ba-991f-35abf10def87 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1596800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 298864k/319424k available (4566k kernel code, 19860k reserved, 2142k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd3ff0000 - 0xff7fe000 ( 696 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd37f0000 ( 311 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575a64 - 0xc078d408 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575a64 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 797.090 MHz processor. [ 0.001884] Console: colour VGA+ 80x25 [ 0.001898] console [tty0] enabled [ 0.002071] Calibrating delay loop (skipped), value calculated using timer frequency.. 1594.18 BogoMIPS (lpj=3188360) [ 0.002138] Security Framework initialized [ 0.002229] AppArmor: AppArmor initialized [ 0.002257] Mount-cache hash table entries: 512 [ 0.002713] Initializing cgroup subsys ns [ 0.002727] Initializing cgroup subsys cpuacct [ 0.002742] Initializing cgroup subsys memory [ 0.002772] Initializing cgroup subsys freezer [ 0.002783] Initializing cgroup subsys net_cls [ 0.002836] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.002846] CPU: L2 cache: 256K [ 0.002856] CPU serial number disabled. [ 0.002871] mce: CPU supports 5 MCE banks [ 0.002919] Performance Counters: [ 0.002928] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.002935] no hardware sampling interrupt available. [ 0.002942] p6 PMU driver. [ 0.002991] ... version: 0 [ 0.002998] ... bit width: 32 [ 0.003004] ... generic counters: 2 [ 0.003011] ... value mask: 00000000ffffffff [ 0.003019] ... max period: 000000007fffffff [ 0.003026] ... fixed-purpose counters: 0 [ 0.003033] ... counter mask: 0000000000000003 [ 0.003049] Checking 'hlt' instruction... OK. [ 0.017710] SMP alternatives: switching to UP code [ 0.028105] Freeing SMP alternatives: 19k freed [ 0.028170] ACPI: Core revision 20090521 [ 0.039076] ACPI: setting ELCR to 0400 (from 0a00) [ 0.040342] weird, boot CPU (#0) not listed by the BIOS. [ 0.040352] SMP motherboard not detected. [ 0.040364] Local APIC not detected. Using dummy APIC emulation. [ 0.040371] SMP disabled [ 0.041000] Brought up 1 CPUs [ 0.041024] Total of 1 processors activated (1594.18 BogoMIPS). [ 0.041103] CPU0 attaching NULL sched-domain. [ 0.042416] Booting paravirtualized kernel on bare hardware [ 0.044121] regulator: core version 0.5 [ 0.044191] Time: 9:00:31 Date: 02/05/10 [ 0.044439] NET: Registered protocol family 16 [ 0.044962] EISA bus registered [ 0.045035] ACPI: bus type pci registered [ 0.047296] PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1 [ 0.047306] PCI: Using configuration type 1 for base access [ 0.050725] bio: create slab at 0 [ 0.052074] ACPI: EC: Look up EC in DSDT [ 0.061024] ACPI: Interpreter enabled [ 0.061044] ACPI: (supports S0 S1 S4 S5) [ 0.061102] ACPI: Using PIC for interrupt routing [ 0.062092] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.076656] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 0.076667] ACPI: EC: driver started in interrupt mode [ 0.076982] ACPI: No dock devices found. [ 0.077265] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.077407] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] [ 0.077635] pci 0000:00:07.1: reg 20 io port: [0x1420-0x142f] [ 0.077727] pci 0000:00:07.2: reg 20 io port: [0x1400-0x141f] [ 0.077841] pci 0000:00:07.4: quirk: region 8000-80ff claimed by vt82c586 ACPI [ 0.077856] pci 0000:00:07.4: BAR 15: address space collision on of bridge [0x8080-0x808f] [ 0.077866] pci 0000:00:07.4: quirk: region 8080-808f claimed by vt82c686 SMB [ 0.077935] pci 0000:00:07.5: reg 10 io port: [0x1000-0x10ff] [ 0.077949] pci 0000:00:07.5: reg 14 io port: [0x1434-0x1437] [ 0.077962] pci 0000:00:07.5: reg 18 io port: [0x1430-0x1433] [ 0.078047] pci 0000:00:09.0: reg 10 32bit mmio: [0xf4000000-0xf400ffff] [ 0.078061] pci 0000:00:09.0: reg 14 io port: [0x1438-0x143f] [ 0.078108] pci 0000:00:09.0: PME# supported from D3hot D3cold [ 0.078120] pci 0000:00:09.0: PME# disabled [ 0.078166] pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.078192] pci 0000:00:0a.0: supports D1 D2 [ 0.078199] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.078209] pci 0000:00:0a.0: PME# disabled [ 0.078300] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf57fffff] [ 0.078314] pci 0000:01:00.0: reg 14 32bit mmio: [0xf4100000-0xf411ffff] [ 0.078328] pci 0000:01:00.0: reg 18 32bit mmio: [0xf4800000-0xf4ffffff] [ 0.078355] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.078385] pci 0000:01:00.0: supports D1 D2 [ 0.078441] pci 0000:00:01.0: bridge 32bit mmio: [0xf4100000-0xf57fffff] [ 0.078479] pci_bus 0000:00: on NUMA node 0 [ 0.078493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.082734] ACPI: PCI Interrupt Link [LNKA] (IRQs 7 9 *11 12) [ 0.083001] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled. [ 0.083324] ACPI: PCI Interrupt Link [LNKC] (IRQs 7 *9 11 12) [ 0.083643] ACPI: PCI Interrupt Link [LNKD] (IRQs 7 9 *11 12) [ 0.084356] SCSI subsystem initialized [ 0.084629] libata version 3.00 loaded. [ 0.084899] usbcore: registered new interface driver usbfs [ 0.084957] usbcore: registered new interface driver hub [ 0.085048] usbcore: registered new device driver usb [ 0.085496] ACPI: WMI: Mapper loaded [ 0.085504] PCI: Using ACPI for IRQ routing [ 0.085891] Bluetooth: Core ver 2.15 [ 0.086028] NET: Registered protocol family 31 [ 0.086035] Bluetooth: HCI device and connection manager initialized [ 0.086046] Bluetooth: HCI socket layer initialized [ 0.086053] NetLabel: Initializing [ 0.086058] NetLabel: domain hash size = 128 [ 0.086063] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.086110] NetLabel: unlabeled traffic allowed by default [ 0.095471] pnp: PnP ACPI init [ 0.095586] ACPI: bus type pnp registered [ 0.098080] pnp 00:06: io resource (0x8000-0x808f) overlaps 0000:00:07.4 BAR 13 (0x8000-0x80ff), disabling [ 0.103471] pnp: PnP ACPI: found 11 devices [ 0.103482] ACPI: ACPI bus type pnp unregistered [ 0.103496] PnPBIOS: Disabled by ACPI PNP [ 0.103540] system 00:05: iomem range 0x0-0x9ffff could not be reserved [ 0.103552] system 00:05: iomem range 0xdc000-0xdffff has been reserved [ 0.103563] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 0.103575] system 00:05: iomem range 0xfffe0000-0xffffffff has been reserved [ 0.103586] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.103610] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.103621] system 00:06: ioport range 0x220-0x22f has been reserved [ 0.103631] system 00:06: ioport range 0x388-0x38b has been reserved [ 0.103642] system 00:06: ioport range 0x9050-0x9051 has been reserved [ 0.138804] AppArmor: AppArmor Filesystem Enabled [ 0.138891] pci 0000:00:07.4: BAR 15: bogus alignment [0x8080-0x808f] flags 0x100 [ 0.138932] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.138940] pci 0000:00:01.0: IO window: disabled [ 0.138954] pci 0000:00:01.0: MEM window: 0xf4100000-0xf57fffff [ 0.138966] pci 0000:00:01.0: PREFETCH window: 0x1c000000-0x1c0fffff [ 0.138979] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 [ 0.138987] pci 0000:00:0a.0: IO window: 0x001800-0x0018ff [ 0.138998] pci 0000:00:0a.0: IO window: 0x001c00-0x001cff [ 0.139008] pci 0000:00:0a.0: PREFETCH window: 0x14000000-0x17ffffff [ 0.139019] pci 0000:00:0a.0: MEM window: 0x18000000-0x1bffffff [ 0.139053] pci 0000:00:01.0: setting latency timer to 64 [ 0.139216] pci 0000:00:0a.0: power state changed by ACPI to D0 [ 0.139783] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 0.139794] PCI: setting IRQ 9 as level-triggered [ 0.139808] pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 0.139826] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.139835] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.139845] pci_bus 0000:01: resource 1 mem: [0xf4100000-0xf57fffff] [ 0.139854] pci_bus 0000:01: resource 2 pref mem [0x1c000000-0x1c0fffff] [ 0.139864] pci_bus 0000:02: resource 0 io: [0x1800-0x18ff] [ 0.139872] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff] [ 0.139881] pci_bus 0000:02: resource 2 pref mem [0x14000000-0x17ffffff] [ 0.139890] pci_bus 0000:02: resource 3 mem: [0x18000000-0x1bffffff] [ 0.140085] NET: Registered protocol family 2 [ 0.140463] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.141490] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.142107] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.142826] TCP: Hash tables configured (established 16384 bind 16384) [ 0.142838] TCP reno registered [ 0.143416] NET: Registered protocol family 1 [ 0.143745] Trying to unpack rootfs image as initramfs... [ 0.640085] Switched to high resolution mode on CPU 0 [ 0.855096] Freeing initrd memory: 7457k freed [ 0.885777] cpufreq-nforce2: No nForce2 chipset. [ 0.885894] Scanning for low memory corruption every 60 seconds [ 0.886373] audit: initializing netlink socket (disabled) [ 0.886450] type=2000 audit(1265360431.884:1): initialized [ 0.914763] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.920586] VFS: Disk quotas dquot_6.5.2 [ 0.920852] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.922965] fuse init (API version 7.12) [ 0.923276] msgmni has been set to 598 [ 0.924160] alg: No test for stdrng (krng) [ 0.924217] io scheduler noop registered [ 0.924225] io scheduler anticipatory registered [ 0.924232] io scheduler deadline registered [ 0.924452] io scheduler cfq registered (default) [ 0.924500] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.924514] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.924572] pci 0000:01:00.0: Boot video device [ 0.924810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.924885] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.926137] ACPI: AC Adapter [AC] (off-line) [ 0.926370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.926385] ACPI: Power Button [PWRF] [ 0.926551] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.926567] ACPI: Power Button [PWRB] [ 0.926708] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.926718] ACPI: Sleep Button [SLPB] [ 0.927160] Marking TSC unstable due to TSC halts in idle [ 0.927207] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.927293] processor LNXCPU:00: registered as cooling_device0 [ 0.937085] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.937118] ACPI: Thermal Zone [THRM] (33 C) [ 0.937292] isapnp: Scanning for PnP cards... [ 1.292516] isapnp: No Plug & Play device found [ 1.296664] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.301082] brd: module loaded [ 1.302677] loop: module loaded [ 1.303056] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.305318] pata_via 0000:00:07.1: version 0.3.4 [ 1.305981] scsi0 : pata_via [ 1.306639] scsi1 : pata_via [ 1.306760] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x1420 irq 14 [ 1.306771] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x1428 irq 15 [ 1.308083] Fixed MDIO Bus: probed [ 1.308221] PPP generic driver version 2.4.2 [ 1.308605] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.308682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.308733] uhci_hcd: USB Universal Host Controller Interface driver [ 1.309577] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.309589] PCI: setting IRQ 11 as level-triggered [ 1.309603] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.309631] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 1.309880] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 1.309938] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001400 [ 1.310243] usb usb1: configuration #1 chosen from 1 choice [ 1.310347] hub 1-0:1.0: USB hub found [ 1.310381] hub 1-0:1.0: 2 ports detected [ 1.310730] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.313469] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.313495] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.313777] mice: PS/2 mouse device common for all mice [ 1.314307] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.314358] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 1.314823] device-mapper: uevent: version 1.0.3 [ 1.315514] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [ 1.315796] device-mapper: multipath: version 1.1.0 loaded [ 1.315809] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.316480] EISA: Probing bus 0 at eisa.0 [ 1.316502] Cannot allocate resource for EISA slot 1 [ 1.316550] Cannot allocate resource for EISA slot 8 [ 1.316557] EISA: Detected 0 cards. [ 1.316887] cpuidle: using governor ladder [ 1.317032] cpuidle: using governor menu [ 1.319107] TCP cubic registered [ 1.319731] NET: Registered protocol family 10 [ 1.321416] lo: Disabled Privacy Extensions [ 1.322635] NET: Registered protocol family 17 [ 1.322717] Bluetooth: L2CAP ver 2.13 [ 1.322724] Bluetooth: L2CAP socket layer initialized [ 1.322734] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.322740] Bluetooth: SCO socket layer initialized [ 1.322900] Bluetooth: RFCOMM TTY layer initialized [ 1.322911] Bluetooth: RFCOMM socket layer initialized [ 1.322918] Bluetooth: RFCOMM ver 1.11 [ 1.323032] Using IPI No-Shortcut mode [ 1.323307] PM: Resume from disk failed. [ 1.323352] registered taskstats version 1 [ 1.323688] Magic number: 14:263:19 [ 1.323915] rtc_cmos 00:02: setting system clock to 2010-02-05 09:00:32 UTC (1265360432) [ 1.323926] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.323933] EDD information not available. [ 1.341512] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.342549] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. [ 1.378255] ACPI: Battery Slot [BAT0] (battery present) [ 1.476785] ata1.00: ATA-5: FUJITSU MHM2150AT, 3722, max UDMA/66 [ 1.476796] ata1.00: 29498112 sectors, multi 16: LBA [ 1.492657] ata1.00: configured for UDMA/66 [ 1.493074] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHM2150A 3722 PQ: 0 ANSI: 5 [ 1.493512] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.493662] sd 0:0:0:0: [sda] 29498112 512-byte logical blocks: (15.1 GB/14.0 GiB) [ 1.493840] sd 0:0:0:0: [sda] Write Protect is off [ 1.493850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.493941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.494420] sda: sda1 sda2 < sda5 > [ 1.547505] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.648300] ata2.01: NODEV after polling detection [ 1.656386] ata2.00: ATAPI: SR243T, L01G, max UDMA/33 [ 1.672355] ata2.00: configured for UDMA/33 [ 1.674848] scsi 1:0:0:0: CD-ROM MITSUMI CD-ROM SR243T L01G PQ: 0 ANSI: 5 [ 1.683188] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 1.683201] Uniform CD-ROM driver Revision: 3.20 [ 1.683538] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.683771] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.683882] Freeing unused kernel memory: 540k freed [ 1.686057] Write protecting the kernel text: 4568k [ 1.686186] Write protecting the kernel read-only data: 1836k [ 2.326183] Linux agpgart interface v0.103 [ 2.407572] agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset [ 2.457713] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 2.698881] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5 [ 2.699028] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.710529] Floppy drive(s): fd0 is 1.44M [ 2.728565] FDC 0 is a post-1991 82077 [ 4.443247] PM: Starting manual resume from disk [ 4.443271] PM: Resume from partition 8:5 [ 4.443277] PM: Checking hibernation image. [ 4.444314] PM: Resume from disk failed. [ 4.490745] EXT4-fs (sda1): barriers enabled [ 4.513349] kjournald2 starting: pid 284, dev sda1:8, commit interval 5 seconds [ 4.513430] EXT4-fs (sda1): delayed allocation enabled [ 4.513442] EXT4-fs: file extents enabled [ 4.518766] EXT4-fs: mballoc enabled [ 4.518841] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.973447] type=1505 audit(1265360437.148:2): operation="profile_load" pid=307 name=/sbin/dhclient3 [ 5.974870] type=1505 audit(1265360437.148:3): operation="profile_load" pid=307 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.975648] type=1505 audit(1265360437.148:4): operation="profile_load" pid=307 name=/usr/lib/connman/scripts/dhclient-script [ 6.109595] type=1505 audit(1265360437.284:5): operation="profile_load" pid=308 name=/usr/bin/evince [ 6.138837] type=1505 audit(1265360437.312:6): operation="profile_load" pid=308 name=/usr/bin/evince-previewer [ 6.156792] type=1505 audit(1265360437.332:7): operation="profile_load" pid=308 name=/usr/bin/evince-thumbnailer [ 6.231151] type=1505 audit(1265360437.404:8): operation="profile_load" pid=310 name=/usr/lib/cups/backend/cups-pdf [ 6.233111] type=1505 audit(1265360437.408:9): operation="profile_load" pid=310 name=/usr/sbin/cupsd [ 6.277490] type=1505 audit(1265360437.452:10): operation="profile_load" pid=311 name=/usr/sbin/tcpdump [ 18.481826] Adding 666656k swap on /dev/sda5. Priority:-1 extents:1 across:666656k [ 18.946041] EXT4-fs (sda1): internal journal on sda1:8 [ 19.444974] udev: starting version 147 [ 21.153122] lp: driver loaded but no devices found [ 21.187068] parport_pc: VIA 686A/8231 detected [ 21.187081] parport_pc: probing current configuration [ 21.187110] parport_pc: Current parallel port base: 0x378 [ 21.187214] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 21.244231] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.278626] ppdev: user-space parallel port driver [ 21.288976] lp0: using parport0 (interrupt-driven). [ 21.288990] parport_pc: VIA parallel port: io=0x378, irq=7 [ 21.498923] ACPI: I/O resource vt596_smbus [0x8080-0x8087] conflicts with ACPI region SMIO [0x8080-0x8086] [ 21.498942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 21.542077] via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr [ 21.572919] Synaptics Touchpad, model: 1, fw: 4.6, id: 0xf42a1, caps: 0x80471b/0x0 [ 21.636169] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 21.937433] yenta_cardbus 0000:00:0a.0: CardBus bridge found [0e11:b103] [ 21.937467] yenta_cardbus 0000:00:0a.0: Enabling burst memory read transactions [ 21.937478] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI [ 21.937487] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI [ 21.937499] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x01001002, devctl 0x64 [ 21.992445] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.168416] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0018, PCI irq 9 [ 22.168432] yenta_cardbus 0000:00:0a.0: Socket status: 30000020 [ 22.816559] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 22.816641] pci 0000:02:00.0: reg 10 io port: [0x00-0xff] [ 22.816657] pci 0000:02:00.0: reg 14 32bit mmio: [0x000000-0x0001ff] [ 22.816731] pci 0000:02:00.0: supports D1 D2 [ 22.816740] pci 0000:02:00.0: PME# supported from D1 D2 D3hot [ 22.816752] pci 0000:02:00.0: PME# disabled [ 23.163679] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 [ 23.166804] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 23.168229] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 23.169381] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 23.170967] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 23.438172] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 23.438280] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 23.652854] 8139too Fast Ethernet driver 0.9.28 [ 23.652997] 8139too 0000:02:00.0: enabling device (0000 -> 0003) [ 23.653030] 8139too 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 23.653067] 8139too 0000:02:00.0: setting latency timer to 64 [ 23.655687] eth0: RealTek RTL8139 at 0x1800, 00:02:44:48:2c:d8, IRQ 9 [ 23.988451] epl: module is from the staging directory, the quality is unknown, you have been warned. [ 24.000384] EPL: + EplLinInit... [ 24.000396] EPL: Driver build: Dec 10 2009 / 17:10:09 [ 24.000404] EPL: Installing Driver 'systec_epl', Version V1.3 r0... [ 24.000416] EPL: Driver 'systec_epl' installed successful, assigned MajorNumber=250 [ 24.000476] EPL: - EplLinInit (iRet=0) [ 24.628735] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 26.054381] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 26.054401] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 26.054567] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64 [ 27.181391] type=1505 audit(1265360458.356:11): operation="profile_replace" pid=772 name=/sbin/dhclient3 [ 27.182817] type=1505 audit(1265360458.356:12): operation="profile_replace" pid=772 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 27.183603] type=1505 audit(1265360458.356:13): operation="profile_replace" pid=772 name=/usr/lib/connman/scripts/dhclient-script [ 27.226176] type=1505 audit(1265360458.400:14): operation="profile_replace" pid=773 name=/usr/bin/evince [ 27.272434] type=1505 audit(1265360458.448:15): operation="profile_replace" pid=773 name=/usr/bin/evince-previewer [ 27.292198] type=1505 audit(1265360458.468:16): operation="profile_replace" pid=773 name=/usr/bin/evince-thumbnailer [ 27.327192] type=1505 audit(1265360458.500:17): operation="profile_replace" pid=778 name=/usr/lib/cups/backend/cups-pdf [ 27.333050] type=1505 audit(1265360458.508:18): operation="profile_replace" pid=778 name=/usr/sbin/cupsd [ 27.343063] type=1505 audit(1265360458.516:19): operation="profile_replace" pid=779 name=/usr/sbin/tcpdump [ 35.320180] eth0: no IPv6 routers present [ 3579.568083] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 3579.746490] usb 1-1: configuration #1 chosen from 1 choice [ 3580.171862] usbcore: registered new interface driver hiddev [ 3580.189330] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/input/input7 [ 3580.189749] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1/input0 [ 3580.189835] usbcore: registered new interface driver usbhid [ 3580.189847] usbhid: v2.6:USB HID core driver anthony@Presario:~$ modprobe cdrom sr-mod FATAL: Module cdrom not found. lspci -v 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) Flags: bus master, medium devsel, latency 0 Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: Kernel driver in use: agpgart-via Kernel modules: via-agp 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f4100000-f57fffff Prefetchable memory behind bridge: 1c000000-1c0fffff Kernel modules: shpchp 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) Subsystem: VIA Technologies, Inc. Device 0000 Flags: bus master, stepping, medium devsel, latency 0 Kernel driver in use: parport_pc Kernel modules: parport_pc 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) Flags: bus master, medium devsel, latency 64 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at 1420 [size=16] Capabilities: Kernel driver in use: pata_via 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) Subsystem: First International Computer, Inc. Device 1234 Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 1400 [size=32] Capabilities: Kernel driver in use: uhci_hcd 00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) Flags: medium devsel, IRQ 10 Capabilities: Kernel modules: via686a, i2c-viapro 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20) Subsystem: Compaq Computer Corporation Device b194 Flags: medium devsel, IRQ 9 I/O ports at 1000 [size=256] I/O ports at 1434 [size=4] I/O ports at 1430 [size=4] Capabilities: Kernel driver in use: VIA 82xx Audio Kernel modules: snd-via82xx 00:09.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem (rev 01) Subsystem: Compaq Computer Corporation Device b1be Flags: medium devsel, IRQ 11 Memory at f4000000 (32-bit, non-prefetchable) [size=64K] I/O ports at 1438 [size=8] Capabilities: 00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) Subsystem: Compaq Computer Corporation Device b103 Flags: bus master, medium devsel, latency 168, IRQ 9 Memory at 1c100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 14000000-17fff000 (prefetchable) Memory window 1: 18000000-1bfff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade i1 (rev 6a) Subsystem: Compaq Computer Corporation Device b16e Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 64, IRQ 9 Memory at f5000000 (32-bit, non-prefetchable) [size=8M] Memory at f4100000 (32-bit, non-prefetchable) [size=128K] Memory at f4800000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 1c000000 [disabled] [size=64K] Capabilities: Kernel modules: tridentfb 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Surecom Technology Device 0428 Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 1800 [size=256] Memory at 18000000 (32-bit, non-prefetchable) [size=512] Capabilities: Kernel driver in use: 8139too Kernel modules: epl, 8139too, 8139cp anthony@Presario:~$ sudo modprobe piix FATAL: Module piix not found. So I ran XUBUNTU 9.10 setup from a CD ROM only to find at completion linux boots and can no longer see an media inserted into the CD drive? How do I troubleshoot and resolve?

When	Who	Action	New State
2010-02-05	A. Denton	Answer	Answered
2010-02-06	TonyR	Reopen	Open
2010-02-07	A. Denton	Answer	Answered
2010-02-08	TonyR	Reopen	Open
2010-02-09	A. Denton	Answer	Answered
2010-02-09	TonyR	Confirm	Solved

Ubuntuyelp package

History of question #99985

Ubuntu
yelp package