No Wifi connection on Compaq Presario with Ubuntu
Since installing Ubuntu I can no longer connect to the internet wirelessly. I have a wireless router but currently need to connect via an ethernet cable to the router.
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu wicd Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Related FAQ:
None Link to a FAQ
Revision history for this message
|
#1 |
What is the output of:
sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep -i firm
Thanks
Revision history for this message
|
#2 |
I entered - sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill
list; dmesg
| grep -i firm
in the terminal the output was hundreds of lines of data is that what you
need?
On Wed, Feb 22, 2012 at 2:35 PM, actionparsnip <
<email address hidden>> wrote:
> Your question #188527 on wicd in Ubuntu changed:
> https:/
>
> Status: Open => Needs information
>
> actionparsnip requested more information:
> What is the output of:
>
> sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg
> | grep -i firm
>
> Thanks
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https:/
>
> You received this question notification because you asked the question.
>
--
Wes
Revision history for this message
|
#4 |
[ 0.172372] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14
15) *0, disabled.
[ 0.172430] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14
15)
[ 0.172486] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14
15)
[ 0.172595] vgaarb: device added:
PCI:0000:
[ 0.172604] vgaarb: loaded
[ 0.172606] vgaarb: bridge control possible 0000:00:02.0
[ 0.172872] SCSI subsystem initialized
[ 0.172944] libata version 3.00 loaded.
[ 0.172997] usbcore: registered new interface driver usbfs
[ 0.173013] usbcore: registered new interface driver hub
[ 0.173045] usbcore: registered new device driver usb
[ 0.173144] PCI: Using ACPI for IRQ routing
[ 0.184105] PCI: pci_cache_line_size set to 64 bytes
[ 0.184144] pci 0000:06:00.0: no compatible bridge window for [mem
0xd0000000-
[ 0.184184] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.184188] reserve RAM buffer: 000000001f680000 - 000000001fffffff
[ 0.184307] NetLabel: Initializing
[ 0.184310] NetLabel: domain hash size = 128
[ 0.184312] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184325] NetLabel: unlabeled traffic allowed by default
[ 0.184376] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer
[ 0.184384] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.184390] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.188057] Switching to clocksource hpet
[ 0.191993] Switched to NOHz mode on CPU #0
[ 0.196142] AppArmor: AppArmor Filesystem Enabled
[ 0.196191] pnp: PnP ACPI init
[ 0.196215] ACPI: bus type pnp registered
[ 0.196620] pnp 00:00: [bus 00-ff]
[ 0.196624] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.196628] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.196631] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.196638] pnp 00:00: [mem 0x000a0000-
[ 0.196641] pnp 00:00: [mem 0x000c0000-
[ 0.196644] pnp 00:00: [mem 0x000c4000-
[ 0.196647] pnp 00:00: [mem 0x000c8000-
[ 0.196650] pnp 00:00: [mem 0x000cc000-
[ 0.196653] pnp 00:00: [mem 0x000d0000-
[ 0.196656] pnp 00:00: [mem 0x000d4000-
[ 0.196659] pnp 00:00: [mem 0x000d8000-
[ 0.196662] pnp 00:00: [mem 0x000dc000-
[ 0.196665] pnp 00:00: [mem 0x000e0000-
[ 0.196668] pnp 00:00: [mem 0x000e4000-
[ 0.196671] pnp 00:00: [mem 0x000e8000-
[ 0.196674] pnp 00:00: [mem 0x000ec000-
[ 0.196677] pnp 00:00: [mem 0x000f0000-
[ 0.196680] pnp 00:00: [mem 0x20000000-
[ 0.196758] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.196792] pnp 00:01: [mem 0xe0000000-
[ 0.196796] pnp 00:01: [mem 0xfed14000-
[ 0.196798] pnp 00:01: [mem 0xfed18000-
[ 0.196801] pnp 00:01: [mem 0xfed19000-
[ 0.196804] pnp 00:01: [mem 0xfed1c000-
[ 0.196807] pnp 00:01: [mem 0xfed20000-
[ 0.196809] pnp 00:01: [mem 0xfed40000-
[ 0.196812] pnp 00:01: [mem 0xfed45000-
[ 0.196872] system 00:01: [mem 0xe0000000-
[ 0.196876] system 00:01: [mem 0xfed14000-
[ 0.196879] system 00:01: [mem 0xfed18000-
[ 0.196883] system 00:01: [mem 0xfed19000-
[ 0.196887] system 00:01: [mem 0xfed1c000-
[ 0.196890] system 00:01: [mem 0xfed20000-
[ 0.196894] system 00:01: [mem 0xfed40000-
[ 0.196897] system 00:01: [mem 0xfed45000-
[ 0.196902] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232033] pnp 00:02: [io 0x0000-0x001f]
[ 0.232036] pnp 00:02: [io 0x0081-0x0091]
[ 0.232039] pnp 00:02: [io 0x0093-0x009f]
[ 0.232041] pnp 00:02: [io 0x00c0-0x00df]
[ 0.232044] pnp 00:02: [dma 4]
[ 0.232088] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.232099] pnp 00:03: [mem 0xff000000-
[ 0.232136] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.232214] pnp 00:04: [mem 0xfed00000-
[ 0.232267] system 00:04: [mem 0xfed00000-
[ 0.232271] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01
(active)
[ 0.232291] pnp 00:05: [io 0x00f0]
[ 0.232308] pnp 00:05: [irq 13]
[ 0.232350] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.232364] pnp 00:06: [io 0x002e-0x002f]
[ 0.232367] pnp 00:06: [io 0x0061]
[ 0.232369] pnp 00:06: [io 0x0063]
[ 0.232372] pnp 00:06: [io 0x0065]
[ 0.232374] pnp 00:06: [io 0x0067]
[ 0.232376] pnp 00:06: [io 0x0070]
[ 0.232379] pnp 00:06: [io 0x0080]
[ 0.232381] pnp 00:06: [io 0x0092]
[ 0.232384] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.232386] pnp 00:06: [io 0x0800-0x080f]
[ 0.232389] pnp 00:06: [io 0x1000-0x107f]
[ 0.232392] pnp 00:06: [io 0x1180-0x11bf]
[ 0.232394] pnp 00:06: [io 0x1640-0x164f]
[ 0.232455] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.232458] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.232462] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.232465] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.232469] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232480] pnp 00:07: [io 0x0060]
[ 0.232483] pnp 00:07: [io 0x0064]
[ 0.232489] pnp 00:07: [irq 1]
[ 0.232534] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.232548] pnp 00:08: [irq 12]
[ 0.232595] pnp 00:08: Plug and Play ACPI device, IDs SYN011f SYN0100
SYN0002 PNP0f13 (active)
[ 0.232606] pnp 00:09: [io 0x0070-0x0077]
[ 0.232612] pnp 00:09: [irq 8]
[ 0.232654] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.232679] pnp: PnP ACPI: found 10 devices
[ 0.232681] ACPI: ACPI bus type pnp unregistered
[ 0.232685] PnPBIOS: Disabled by ACPI PNP
[ 0.269103] PCI: max bus depth: 1 pci_try_num: 2
[ 0.269160] pci 0000:00:1c.2: BAR 14: assigned [mem
0x20000000-
[ 0.269166] pci 0000:00:1c.2: BAR 15: assigned [mem
0x20200000-
[ 0.269171] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.269175] pci 0000:00:1c.0: BAR 14: assigned [mem
0x20400000-
[ 0.269180] pci 0000:00:1c.0: BAR 15: assigned [mem
0x20600000-
[ 0.269185] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.269189] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.269193] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.269201] pci 0000:00:1c.0: bridge window [mem 0x20400000-
[ 0.269207] pci 0000:00:1c.0: bridge window [mem 0x20600000-
64bit pref]
[ 0.269216] pci 0000:06:00.0: BAR 0: assigned [mem 0x20000000-
[ 0.269225] pci 0000:06:00.0: BAR 0: set to [mem 0x20000000-
(PCI address [0x20000000-
[ 0.269229] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 0.269233] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.269240] pci 0000:00:1c.2: bridge window [mem 0x20000000-
[ 0.269246] pci 0000:00:1c.2: bridge window [mem 0x20200000-
64bit pref]
[ 0.269255] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.269260] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.269267] pci 0000:00:1e.0: bridge window [mem 0xd0100000-
[ 0.269272] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.269287] pci 0000:00:1c.0: enabling device (0100 -> 0103)
[ 0.269303] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.269312] pci 0000:00:1c.0: setting latency timer to 64
[ 0.269320] pci 0000:00:1c.2: enabling device (0100 -> 0103)
[ 0.269328] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.269335] pci 0000:00:1c.2: setting latency timer to 64
[ 0.269344] pci 0000:00:1e.0: setting latency timer to 64
[ 0.269350] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.269353] pci_bus 0000:00: resource 1 [mem 0x00000000-
[ 0.269356] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.269359] pci_bus 0000:01: resource 1 [mem 0x20400000-
[ 0.269363] pci_bus 0000:01: resource 2 [mem 0x20600000-
pref]
[ 0.269366] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.269369] pci_bus 0000:06: resource 1 [mem 0x20000000-
[ 0.269372] pci_bus 0000:06: resource 2 [mem 0x20200000-
pref]
[ 0.269376] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
[ 0.269379] pci_bus 0000:08: resource 1 [mem 0xd0100000-
[ 0.269382] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.269385] pci_bus 0000:08: resource 5 [mem 0x00000000-
[ 0.269435] NET: Registered protocol family 2
[ 0.269514] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.269734] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.269829] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.269929] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.269932] TCP reno registered
[ 0.269935] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.269943] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.270031] NET: Registered protocol family 1
[ 0.270047] pci 0000:00:02.0: Boot video device
[ 1.868018] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 1.868052] PCI: CLS 64 bytes, default 64
[ 1.868112] Simple Boot Flag at 0x36 set to 0x1
[ 1.868420] audit: initializing netlink socket (disabled)
[ 1.868432] type=2000 audit(132993468
[ 1.893385] Trying to unpack rootfs image as initramfs...
[ 1.926032] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.932133] VFS: Disk quotas dquot_6.5.2
[ 1.932221] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.933089] fuse init (API version 7.16)
[ 1.933199] msgmni has been set to 946
[ 1.944248] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.948250] io scheduler noop registered
[ 1.948255] io scheduler deadline registered
[ 1.948302] io scheduler cfq registered (default)
[ 1.948450] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.948520] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.948612] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.948668] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 1.948780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.948810] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.948877] intel_idle: MWAIT substates: 0x1110
[ 1.948879] intel_idle: does not run on family 6 model 14
[ 1.968183] ACPI: Deprecated procfs I/F for AC is loaded, please retry
with CONFIG_
[ 1.984168] ACPI: AC Adapter [ACAD] (on-line)
[ 1.984282] input: Lid Switch as
/devices/
[ 1.984317] ACPI: Lid Switch [LID]
[ 1.984368] input: Power Button as
/devices/
[ 1.984373] ACPI: Power Button [PWRB]
[ 1.984439] input: Power Button as
/devices/
[ 1.984443] ACPI: Power Button [PWRF]
[ 1.984497] input: Sleep Button as
/devices/
[ 1.984501] ACPI: Sleep Button [SLPF]
[ 1.984510] ACPI Error: Could not enable SleepButton event
(20110413/
[ 1.984516] ACPI Warning: Could not enable fixed event 0x3
(20110413/
[ 1.984569] button: probe of LNXSLPBN:00 failed with error -22
[ 1.984592] ACPI: acpi_idle registered with cpuidle
[ 1.984909] Marking TSC unstable due to TSC halts in idle
[ 2.092397] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.092403] ACPI: Thermal Zone [TZ01] (65 C)
[ 2.092533] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.092536] ACPI: Thermal Zone [TZ02] (27 C)
[ 2.092578] ACPI: Deprecated procfs I/F for battery is loaded, please
retry with CONFIG_
[ 2.092610] ERST: Table is not found!
[ 2.092730] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.094296] Linux agpgart interface v0.103
[ 2.094367] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 2.094415] agpgart-intel 0000:00:00.0: detected gtt size: 262144K
total, 262144K mappable
[ 2.094641] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 2.094776] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 2.100375] brd: module loaded
[ 2.101069] loop: module loaded
[ 2.101269] ata_piix 0000:00:1f.1: version 2.13
[ 2.101306] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 2.101355] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.101832] isapnp: Scanning for PnP cards...
[ 2.107350] scsi0 : ata_piix
[ 2.107448] scsi1 : ata_piix
[ 2.107843] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq
14
[ 2.107847] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq
15
[ 2.108287] Fixed MDIO Bus: probed
[ 2.108320] PPP generic driver version 2.4.2
[ 2.108391] tun: Universal TUN/TAP device driver, 1.6
[ 2.108394] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 2.108501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.108532] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 2.108551] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.108556] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.108595] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 2.108623] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.108636] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.112536] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.160329] ata2: port disabled. ignoring.
[ 2.160375] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[ 2.324458] ata1.00: ATAPI: Optiarc CD-RW CRX880A, KH17, max MWDMA2
[ 2.340369] ata1.00: configured for MWDMA2
[ 2.340467] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.340679] hub 1-0:1.0: USB hub found
[ 2.340685] hub 1-0:1.0: 6 ports detected
[ 2.340835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.340857] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.340924] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 2.340937] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.340942] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.341001] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 2.341039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 2.341185] hub 2-0:1.0: USB hub found
[ 2.341190] hub 2-0:1.0: 2 ports detected
[ 2.341260] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 2.341268] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.341272] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.341310] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 2.341356] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 2.341493] hub 3-0:1.0: USB hub found
[ 2.341498] hub 3-0:1.0: 2 ports detected
[ 2.341560] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 2.341567] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.341572] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.341620] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 2.341662] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.341802] hub 4-0:1.0: USB hub found
[ 2.341806] hub 4-0:1.0: 2 ports detected
[ 2.341929] i8042: PNP: PS/2 Controller [PNP0303:
0x60,0x64 irq 1,12
[ 2.366626] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.366644] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.366842] mousedev: PS/2 mouse device common for all mice
[ 2.368423] rtc_cmos 00:09: RTC can wake from S4
[ 2.368558] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 2.368596] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.368746] device-mapper: uevent: version 1.0.3
[ 2.368835] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
<email address hidden>
[ 2.368876] EISA: Probing bus 0 at eisa.0
[ 2.368884] Cannot allocate resource for EISA slot 1
[ 2.368888] Cannot allocate resource for EISA slot 2
[ 2.368890] Cannot allocate resource for EISA slot 3
[ 2.368893] Cannot allocate resource for EISA slot 4
[ 2.368911] EISA: Detected 0 cards.
[ 2.368924] cpufreq-nforce2: No nForce2 chipset.
[ 2.368966] cpuidle: using governor ladder
[ 2.369024] cpuidle: using governor menu
[ 2.369027] EFI Variables Facility v0.08 2004-May-17
[ 2.369343] TCP cubic registered
[ 2.369513] NET: Registered protocol family 10
[ 2.370148] NET: Registered protocol family 17
[ 2.370173] Registering the dns_resolver key type
[ 2.370199] Using IPI No-Shortcut mode
[ 2.370292] PM: Hibernation image not present or could not be loaded.
[ 2.370307] registered taskstats version 1
[ 2.553473] input: AT Translated Set 2 keyboard as
/devices/
[ 2.603620] isapnp: No Plug & Play device found
[ 2.624388] ACPI: Battery Slot [BAT1] (battery present)
[ 2.649137] scsi 0:0:0:0: CD-ROM Optiarc CD-RW CRX880A
KH17 PQ: 0 ANSI: 5
[ 2.652113] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.652119] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.652272] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.652364] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.668862] Freeing initrd memory: 13328k freed
[ 2.685988] Magic number: 0:808:342
[ 2.686134] rtc_cmos 00:09: setting system clock to 2012-02-22 18:18:03
UTC (1329934683)
[ 2.686158] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.686160] EDD information not available.
[ 2.686305] Freeing unused kernel memory: 696k freed
[ 2.686647] Write protecting the kernel text: 5340k
[ 2.686694] Write protecting the kernel read-only data: 2192k
[ 2.705970] udevd[81]: starting version 173
[ 2.873364] ahci 0000:00:1f.2: version 3.0
[ 2.873386] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.873447] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 2.873530] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps
0x1 impl SATA mode
[ 2.873535] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.873541] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.879345] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,
2004)
[ 2.879377] 8139cp 0000:08:08.0: This (id 10ec:8139 rev 10) is not an
8139C+ compatible chip, use 8139too
[ 2.879875] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.879908] 8139too 0000:08:08.0: enabling device (0105 -> 0107)
[ 2.879928] 8139too 0000:08:08.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 2.897899] scsi2 : ahci
[ 2.901301] scsi3 : ahci
[ 2.901939] 8139too 0000:08:08.0: eth0: RealTek RTL8139 at 0x2000,
00:16:d4:e9:72:9e, IRQ 16
[ 2.904118] scsi4 : ahci
[ 2.906720] scsi5 : ahci
[ 2.906886] ata3: SATA max UDMA/133 abar m1024@0xd0544400 port
0xd0544500 irq 42
[ 2.906889] ata4: DUMMY
[ 2.906891] ata5: DUMMY
[ 2.906893] ata6: DUMMY
[ 3.224057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.224756] ata3.00: ACPI cmd ef/10:03:
filtered out
[ 3.224764] ata3.00: ATA-7: TOSHIBA MK8034GSX, AH301H, max UDMA/100
[ 3.224767] ata3.00: 156301488 sectors, multi 16: LBA48
[ 3.225473] ata3.00: ACPI cmd ef/10:03:
filtered out
[ 3.225479] ata3.00: configured for UDMA/100
[ 3.225623] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8034GS
AH30 PQ: 0 ANSI: 5
[ 3.225823] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.225924] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 3.225988] sd 2:0:0:0: [sda] Write Protect is off
[ 3.225992] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.226020] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.320402] sda: sda1 sda2 < sda5 >
[ 3.320737] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.664301] EXT4-fs (sda1): mounted filesystem with ordered data mode.
Opts: (null)
[ 6.771773] udevd[277]: starting version 173
[ 7.016230] Adding 513020k swap on /dev/sda5. Priority:-1 extents:1
across:513020k
[ 8.753303] lp: driver loaded but no devices found
[ 10.342230] intel_rng: FWH not detected
[ 10.478307] wmi: Mapper loaded
[ 10.504202] acpi device:05: registered as cooling_device1
[ 10.504354] input: Video Bus as
/devices/
[ 10.504460] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:
no)
[ 11.188660] [drm] Initialized drm 1.1.0 20060810
[ 11.225973] lib80211: common routines for IEEE802.11 drivers
[ 11.225978] lib80211_crypt: registered algorithm 'NULL'
[ 11.310926] leds_ss4200: no LED devices found
[ 12.083776] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.083784] i915 0000:00:02.0: setting latency timer to 64
[ 12.085942] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.085946] [drm] Driver supports precise vblank timestamp query.
[ 12.120029] vgaarb: device changed decodes:
PCI:0000:
[ 12.200455] input: HP WMI hotkeys as /devices/
[ 12.431253] [drm] initialized overlay support
[ 12.579675] fbcon: inteldrmfb (fb0) is primary device
[ 12.580831] Console: switching to colour frame buffer device 160x50
[ 12.580881] fb0: inteldrmfb frame buffer device
[ 12.580883] drm: registered panic notifier
[ 12.580926] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 12.734638] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[ 12.734707] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 12.734814] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.097507] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps:
0xa04713/
[ 13.172781] input: SynPS/2 Synaptics TouchPad as
/devices/
[ 13.449412] wl: module license 'MIXED/Proprietary' taints kernel.
[ 13.449419] Disabling lock debugging due to kernel taint
[ 13.472821] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.472832] wl 0000:06:00.0: setting latency timer to 64
[ 13.475283] malloc in abgphy done
[ 13.475427] eth%d: 5.100.82.38 driver failed with code 21
[ 14.377633] type=1400 audit(132993469
operation=
comm="apparmor_
[ 14.378170] type=1400 audit(132993469
operation=
name="/
comm="apparmor_
[ 14.378508] type=1400 audit(132993469
operation=
pid=526 comm="apparmor_
[ 14.379230] type=1400 audit(132993469
operation=
comm="apparmor_
[ 14.379764] type=1400 audit(132993469
operation=
name="/
comm="apparmor_
[ 14.380157] type=1400 audit(132993469
operation=
pid=574 comm="apparmor_
[ 45.601411] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 48.711498] ppdev: user-space parallel port driver
[ 48.792042] type=1400 audit(132993472
operation=
pid=781 comm="apparmor_
[ 48.977288] type=1400 audit(132993472
operation=
name="/
comm="apparmor_
[ 48.980833] type=1400 audit(132993472
operation=
comm="apparmor_
[ 48.981393] type=1400 audit(132993472
operation=
name="/
comm="apparmor_
[ 48.981740] type=1400 audit(132993472
operation=
pid=803 comm="apparmor_
[ 49.023898] type=1400 audit(132993472
operation=
comm="apparmor_
[ 49.024758] type=1400 audit(132993472
operation=
comm="apparmor_
[ 50.092553] type=1400 audit(132993473
operation=
comm="apparmor_
[ 50.101611] type=1400 audit(132993473
operation=
comm="apparmor_
[ 50.106094] type=1400 audit(132993473
operation=
comm="apparmor_
[ 50.826272] 8139too 0000:08:08.0: eth0: link down
[ 50.826386] ADDRCONF(
[ 51.617136] init: failsafe main process (728) killed by TERM signal
[ 51.775373] init: apport pre-start process (861) terminated with status 1
[ 51.779215] init: apport post-stop process (898) terminated with status 1
[ 51.821536] init: gdm main process (892) killed by TERM signal
[ 54.132109] vboxdrv: Found 1 processor cores.
[ 54.137380] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 54.137386] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface
0x00190000).
[ 54.288623] vboxpci: IOMMU not found (not registered)
[ 54.774822] Bluetooth: Core ver 2.16
[ 54.774869] NET: Registered protocol family 31
[ 54.774872] Bluetooth: HCI device and connection manager initialized
[ 54.774875] Bluetooth: HCI socket layer initialized
[ 54.774877] Bluetooth: L2CAP socket layer initialized
[ 54.779092] Bluetooth: SCO socket layer initialized
[ 55.207896] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 55.207902] Bluetooth: BNEP filters: protocol multicast
[ 55.208467] Bluetooth: RFCOMM TTY layer initialized
[ 55.208481] Bluetooth: RFCOMM socket layer initialized
[ 55.208484] Bluetooth: RFCOMM ver 1.11
[ 56.930109] nf_conntrack version 0.5.0 (7792 buckets, 31168 max)
[ 57.248605] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.729093] EXT4-fs (sda1): re-mounted. Opts: errors=
[ 69.150399] init: plymouth-stop pre-start process (1439) terminated with
status 1
[ 71.068621] EXT4-fs (sda1): re-mounted. Opts: errors=
[ 83.987481] Netfilter messages via NETLINK v0.30.
[ 201.664668] EXT4-fs (sda1): re-mounted. Opts:
errors=
[ 476.532855] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 476.532903] ADDRCONF(
[ 486.736020] eth0: no IPv6 routers present
wes@Lappy3000
On Wed, Feb 22, 2012 at 4:06 PM, actionparsnip <
<email address hidden>> wrote:
> Your question #188527 on wicd in Ubuntu changed:
> https:/
>
> Status: Open => Needs information
>
> actionparsnip requested more information:
> All of it please..
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https:/
>
> You received this question notification because you asked the question.
>
--
Wes
Revision history for this message
|
#5 |
You didn't run the command I gave
Revision history for this message
|
#6 |
Hi,
Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1:
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
So the methods in Unity are:
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2: Please copy-paste the following command from https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Step 4: Please also specify the exact model and make of your PC (if known) on this thread
Regards,
Mark
Revision history for this message
|
#7 |
wes@Lappy3000:~$ sudo apt-get update; sudo apt-get install hwinfo grep
rfkill; sudo lshw
[sudo] password for wes:
Sorry, try again.
[sudo] password for wes:
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Get:1 http://
Hit http://
Get:2 http://
Hit http://
Hit http://
Hit http://
Get:3 http://
Get:4 http://
Hit http://
Get:5 http://
Hit http://
Packages
Hit http://
Sources
Get:6 http://
kB]
Ign http://
TranslationIndex
Hit http://
Packages
Ign http://
TranslationIndex
Hit http://
Sources
Hit http://
Sources
Hit http://
Sources
Hit http://
Sources
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
Get:7 http://
Get:8 http://
B]
Get:9 http://
kB]
Get:10 http://
[1,645 B]
Get:11 http://
kB]
Get:12 http://
[1,337 B]
Get:13 http://
kB]
Get:14 http://
[3,662 B]
Get:15 http://
kB]
Get:16 http://
[14 B]
Get:17 http://
[29.7 kB]
Get:18 http://
[3,355 B]
Get:19 http://
[73 B]
Get:20 http://
TranslationIndex [72 B]
Get:21 http://
TranslationIndex [70 B]
Get:22 http://
TranslationIndex [73 B]
Ign http://
Translation-en_US
Ign http://
Translation-en_US
Hit http://
Translation-en
Ign http://
Translation-en
Hit http://
Translation-en
Hit http://
Translation-en
Ign http://
Translation-en
Hit http://
Translation-en
Get:23 http://
Packages [2,968 B]
Get:24 http://
[97.7 kB]
Get:25 http://
Packages [6,355 B]
Get:26 http://
[74 B]
Get:27 http://
TranslationIndex [72 B]
Get:28 http://
TranslationIndex [71 B]
Get:29 http://
TranslationIndex [73 B]
Hit http://
Hit http://
Hit http://
Hit http://
Get:30 http://
[136 kB]
Hit http://
Hit http://
Hit http://
Fetched 948 kB in 5s (183 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
lappy3000
description: Notebook
version: F.15
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=oem-specific chassis=notebook cpus=1
family=103C_5335KV sku=RZ343UA#ABA uuid=6061D3BC-
*-core
description: Motherboard
product: 30C6
vendor: Hewlett-Packard
physical id: 0
version: 78.10
serial: CND7160MNB
*-firmware
vendor: Hewlett-Packard
physical id: 0
version: F.15
date: 03/09/2007
size: 99KiB
capacity: 960KiB
bootselect int5printscreen int9keyboard int17printer int10video acpi usb
agp smartbattery biosbootspecifi
*-cpu
product: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.14.12
serial: 0000-06EC-
slot: U1
size: 1860MHz
capacity: 1860MHz
width: 32 bits
mce cx8 apic mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe
nx constant_tsc up arch_perfmon bts aperfmperf pni monitor tm2 xtpr pdcm
*-cache
slot: L2 Cache
size: 1MiB
*-memory
physical id: a
slot: System board or motherboard
size: 512MiB
capacity: 2GiB
*-bank:0
slot: M1
size: 512MiB
width: 32 bits
*-bank:1
slot: M2
*-pci
product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory
Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 03
width: 32 bits
clock: 33MHz
*-display:0
Graphics Controller
bus info: pci@0000:00:02.0
width: 32 bits
clock: 33MHz
memory:
*-display:1 UNCLAIMED
Graphics Controller
bus info: pci@0000:00:02.1
width: 32 bits
clock: 33MHz
bus info: pci@0000:00:1b.0
width: 64 bits
clock: 33MHz
*-pci:0
bus info: pci@0000:00:1c.0
width: 32 bits
clock: 33MHz
cap_list
memory:
*-pci:1
bus info: pci@0000:00:1c.2
width: 32 bits
clock: 33MHz
cap_list
memory:
bus info: pci@0000:06:00.0
*-usb:0
bus info: pci@0000:00:1d.0
width: 32 bits
clock: 33MHz
*-usb:1
bus info: pci@0000:00:1d.1
width: 32 bits
clock: 33MHz
*-usb:2
bus info: pci@0000:00:1d.2
width: 32 bits
clock: 33MHz
*-usb:3
bus info: pci@0000:00:1d.7
width: 32 bits
clock: 33MHz
*-pci:2
bus info: pci@0000:00:1e.0
width: 32 bits
clock: 33MHz
bus info: pci@0000:08:08.0
mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
driver=8139too driverversion=
link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
memory:
*-isa
bus info: pci@0000:00:1f.0
width: 32 bits
clock: 33MHz
*-ide
bus info: pci@0000:00:1f.1
width: 32 bits
clock: 33MHz
ioport:170(size=8) ioport:376 ioport:
*-cdrom
bus info: scsi@0:0.0.0
*-storage
bus info: pci@0000:00:1f.2
width: 32 bits
clock: 66MHz
emulated
ioport:18a8(size=8) ioport:18a0(size=4) ioport:
memory:
*-disk
bus info: scsi@2:0.0.0
extended_attributes large_files huge_files dir_nlink recover extents ext4
ext2 initialized
filesystem=ext4 lastmountpoint=/ modified=2012-02-22 13:18:07
mount.fstype=ext4
mount.options=
mounted=2012-02-22 18:32:11 state=mounted
partitioned:
*-serial UNCLAIMED
bus info: pci@0000:00:1f.3
width: 32 bits
clock: 33MHz
It is a Presario C500
also have sn &pn if you need.
On Thu, Feb 23, 2012 at 6:41 AM, Mark Rijckenberg <
<email address hidden>> wrote:
> Your question #188527 on wicd in Ubuntu changed:
> https:/
>
> Mark Rijckenberg requested more information:
> Hi,
>
> Please first connect your wired network adapter to the wireless router
> using an ethernet cable (also known as a LAN cable).
>
> In order to gather essential troubleshooting information about your
> wireless card, please follow this procedure:
>
> Step 1:
>
> If you are using the Gnome interface, open the Terminal console via
> "Applications-
>
> If you are using the Unity interface, the easiest way to open the
> Terminal is to use the 'search' function on the dash. Or you can click
> on the 'More Apps' button, click on the 'See more results' by the
> installed section, and find it in that list of applications. A third
> way, available after you click on the 'More Apps' button, is to go to
> the search bar, and see that the far right end of it says 'All
> Applications'. You then click on that, and you'll see the full list.
> Then you can go to Accessories > Terminal after that.
>
> So the methods in Unity are:
> Dash > Search for Terminal
> Dash > More Apps > 'See More Results' > Terminal
> Dash > More Apps > Accessories > Terminal
>
> Step 2: Please copy-paste the following command from
> https:/
> Firefox into the Linux Terminal. Do NOT copy-paste from the Email
> message into the Terminal, as that will only copy PART of the command.
> The command STARTS with the word sudo and ENDS with the word lsmod. So
> please copy-paste the ENTIRE command below from Firefox into a Terminal,
> press <enter>, then enter password when sudo asks for password, then
> press enter again.
>
> Tip: If you have a wheel mouse or 3 button mouse you do not need to type
> commands into the Terminal. Highlight the command written on the page.
> Move your cursor anywhere in the Terminal and press the wheel or middle
> button. Automatic Copy and paste! No spelling mistakes! No Typos! No
> other errors!
>
> sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw
> -C network; rfkill list; sudo iwlist scanning; cat
> /etc/network/
> lshw -short; uname -a; dmesg | egrep
>
> 'acx|at76|
> dmidecode|egrep 'anufact|
> /etc/modprobe.d/* | egrep
>
> 'acx|at76|
> cat /var/lib/
> ; ps -aux|egrep 'wpa|icd|etwork'; sudo lsmod
>
> Step 3: Please post results (copy/paste terminal output) on this thread.
> The troubleshooters here need to see the full Terminal output from
> running the above command.
>
> Step 4: Please also specify the exact model and make of your PC (if
> known) on this thread
>
> Regards,
>
> Mark
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https:/
>
> You received this question notification because you asked the question.
>
--
Wes
Revision history for this message
|
#8 |
You did not follow the instructions in step 2. Your command ends with lshw, but it should end with lsmod, as I explained before. Avoid using the Email client to copy-paste the command.
I will repeat the instructions here:
Step 2: Please copy-paste the following command from https:/
Revision history for this message
|
#9 |
I sent the command but the only way to get terminal results to you is to
copy and past into this reply. What am I doing wrong?
On Thu, Feb 23, 2012 at 4:11 PM, Wes <email address hidden> wrote:
> es@Lappy3000:~$ sudo apt-get update; sudo apt-get install hwinfo grep
> rfkill; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat
> /etc/network/
> -short; uname -a; dmesg | egrep
> 'acx|at76|
> dmidecode|egrep 'anufact|
> /etc/modprobe.d/* | egrep
> 'acx|at76|
> cat /var/lib/
> ps -aux|egrep 'wpa|icd|etwork'; sudo lsmod
> [sudo] password for wes:
> Ign http://
>
> Ign http://
> Ign http://
> Ign http://
> Hit http://
> Hit http://
>
> Hit http://
> Hit http://
> Hit http://
> Hit http://
> Ign http://
> Hit http://
> Release.gpg
> Hit http://
> Hit http://
> Packages
> Hit http://
> Sources
> Hit http://
> Release
> Hit http://
> Ign http://
> Hit http://
> Packages
> Ign http://
> TranslationIndex
> Hit http://
> Sources
> Hit http://
> Sources
> Hit http://
> Sources
> Hit http://
> Sources
> Hit http://
> Packages
> Hit http://
> Sources
> Hit http://
> Packages
> Hit http://
> Hit http://
> Hit http://
> Hit http://
> Hit http://
> TranslationIndex
> Hit http://
> Sources
> Hit http://
> Sources
> Hit http://
> Sources
> Hit http://
> Packages
> Hit http://
> Packages
> Hit http://
> TranslationIndex
> Hit http://
> Hit http://
> Hit http://
> Sources
> Hit http://
> Sources
> Hit http://
> Packages
> Hit http://
> Packages
> Hit http://
> Packages
> Hit http://
> Packages
> Hit http://
> Packages
> Hit http://
> TranslationIndex
> Hit http://
> TranslationIndex
> Hit http://
> TranslationIndex
> Hit http://
> Packages
> Hit http://
> TranslationIndex
> Hit http://
> TranslationIndex
> Hit http://
> TranslationIndex
> Hit http://
> TranslationIndex
> Hit http://
>
> Hit http://
> Hit http://
> Hit http://
>
> Hit http://
> Hit http://
> Hit http://
> Hit http://
> Hit http://
> Translation-en
> Hit http://
> Translation-en
> Hit http://
> Translation-en
> Hit http://
> Translation-en
> Hit http://
> Translation-en
> Ign http://
> Ign http://
> Ign http://
> Ign http://
> Reading package lists... Done
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> grep is already the newest version.
> rfkill is already the newest version.
> hwinfo is already the newest version.
> 0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
> *-network UNCLAIMED
> description: Network controller
> product: BCM4311 802.11b/g WLAN
> vendor: Broadcom Corporation
> physical id: 0
> bus info: pci@0000:06:00.0
> version: 01
> width: 32 bits
> clock: 33MHz
> capabilities: pm msi pciexpress bus_master cap_list
> configuration: latency=0
> resources: memory:
> *-network
> description: Ethernet interface
> product: RTL-8139/
> vendor: Realtek Semiconductor Co., Ltd.
> physical id: 8
> bus info: pci@0000:08:08.0
> logical name: eth0
> version: 10
> serial: 00:16:d4:e9:72:9e
> size: 100Mbit/s
> capacity: 100Mbit/s
> width: 32 bits
> clock: 33MHz
> capabilities: pm bus_master cap_list ethernet physical tp mii 10bt
> 10bt-fd 100bt 100bt-fd autonegotiation
> configuration: autonegotiation=on broadcast=yes driver=8139too
> driverversion=
> maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
> resources: irq:16 ioport:
> 0: hp-wifi: Wireless LAN
> Soft blocked: no
> Hard blocked: yes
> lo Interface doesn't support scanning.
>
> eth0 Interface doesn't support scanning.
>
> auto lo
> iface lo inet loopback
>
> DISTRIB_ID=Ubuntu
> DISTRIB_
> DISTRIB_
> DISTRIB_
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS,
> 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
> 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2]
> (rev 03)
> 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
> 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
> Definition Audio Controller [8086:27d8] (rev 01)
> 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> Port 1 [8086:27d0] (rev 01)
> 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> Port 3 [8086:27d4] (rev 01)
> 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #1 [8086:27c8] (rev 01)
> 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #2 [8086:27c9] (rev 01)
> 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #3 [8086:27ca] (rev 01)
> 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2
> EHCI Controller [8086:27cc] (rev 01)
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> [8086:2448] (rev e1)
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
> Interface Bridge [8086:27b9] (rev 01)
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
> Controller [8086:27df] (rev 01)
> 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7
> Family) SATA AHCI Controller [8086:27c5] (rev 01)
> 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
> [8086:27da] (rev 01)
> 06:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g
> WLAN [14e4:4311] (rev 01)
> 08:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL-8139/
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> H/W path Device Class Description
> =======
> system Notebook
> /0 bus 30C6
> /0/0 memory 99KiB BIOS
> /0/4 processor Intel(R) Celeron(R) M
> CPU
> /0/4/5 memory 1MiB L2 cache
> /0/a memory 512MiB System Memory
> /0/a/0 memory 512MiB SODIMM DDR2
> Synchronous
> /0/a/1 memory SODIMM DDR2 Synchronous
> [empty]
> /0/100 bridge Mobile 945GM/PM/GMS,
> 943/940GML a
> /0/100/2 display Mobile 945GM/GMS,
> 943/940GML Expr
> /0/100/2.1 display Mobile 945GM/GMS/GME,
> 943/940GML
> /0/100/1b multimedia N10/ICH 7 Family High
> Definition
> /0/100/1c bridge N10/ICH 7 Family PCI
> Express Port
> /0/100/1c.2 bridge N10/ICH 7 Family PCI
> Express Port
> /0/100/1c.2/0 network BCM4311 802.11b/g WLAN
> /0/100/1d bus N10/ICH 7 Family USB UHCI
> Control
> /0/100/1d.1 bus N10/ICH 7 Family USB UHCI
> Control
> /0/100/1d.2 bus N10/ICH 7 Family USB UHCI
> Control
> /0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI
> Contro
> /0/100/1e bridge 82801 Mobile PCI Bridge
> /0/100/1e/8 eth0 network RTL-8139/
> /0/100/1f bridge 82801GBM (ICH7-M) LPC
> Interface B
> /0/100/1f.1 scsi0 storage 82801G (ICH7 Family) IDE
> Controll
> /0/100/1f.1/0.0.0 /dev/cdrom disk CD-RW CRX880A
> /0/100/1f.2 scsi2 storage 82801GBM/GHM (ICH7 Family)
> SATA A
> /0/100/1f.2/0.0.0 /dev/sda disk 80GB TOSHIBA MK8034GS
> /0/100/1f.2/0.0.0/1 /dev/sda1 volume 74GiB EXT4 volume
> /0/100/1f.2/0.0.0/2 /dev/sda2 volume 501MiB Extended partition
> /0/100/
> parti
> /0/100/1f.3 bus N10/ICH 7 Family SMBus
> Controller
> Linux Lappy3000 3.0.0-16-generic #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC
> 2012 i686 i686 i386 GNU/Linux
> [ 0.000000] DMI: Hewlett-Packard Presario C500 (RZ343UA#ABA)
> /30C6, BIOS F.15 03/09/2007
> [ 0.000000] Found optimal setting for mtrr clean up
> [ 0.000000] found SMP MP-table at [c00f65c0] f65c0
> [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
> [ 0.004607] SMP alternatives: switching to UP code
> [ 0.076787] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.164908] ACPI: No dock devices found.
> [ 0.164911] HEST: Table not found.
> [ 0.172998] usbcore: registered new interface driver usbfs
>
> [ 0.173013] usbcore: registered new interface driver hub
> [ 0.173045] usbcore: registered new device driver usb
> [ 0.188057] Switching to clocksource hpet
>
> [ 0.191993] Switched to NOHz mode on CPU #0
> [ 0.232678] pnp: PnP ACPI: found 10 devices
> [ 1.976391] input: Lid Switch as
> /devices/
> [ 1.976427] ACPI: Lid Switch [LID]
> [ 2.084593] ERST: Table is not found!
> [ 2.144465] ehci_hcd 0000:00:1d.7: using broken periodic workaround
> [ 2.172263] hub 1-0:1.0: USB hub found
> [ 2.172709] hub 2-0:1.0: USB hub found
> [ 2.173017] hub 3-0:1.0: USB hub found
> [ 2.173321] hub 4-0:1.0: USB hub found
> [ 2.639149] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 2.682875] isapnp: No Plug & Play device found
> [ 2.915170] 8139too 0000:08:08.0: eth0: RealTek RTL8139 at 0x2000,
> 00:16:d4:e9:72:9e, IRQ 16
> [ 21.139184] lp: driver loaded but no devices found
> [ 23.936828] leds_ss4200: no LED devices found
> [ 25.821055] Console: switching to colour frame buffer device 160x50
> [ 26.809901] wl: module license 'MIXED/Proprietary' taints kernel.
> [ 26.837790] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 26.837800] wl 0000:06:00.0: setting latency timer to 64
> [ 26.840417] eth%d: 5.100.82.38 driver failed with code 21
> [ 29.827873] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> lpa 0x45E1
> [ 30.429093] vboxdrv: Found 1 processor cores.
> [ 30.490661] vboxpci: IOMMU not found (not registered)
> [ 40.208017] eth0: no IPv6 routers present
> [ 2211.678253] usb usb2: root hub lost power or was reset
> [ 2211.678305] usb usb3: root hub lost power or was reset
> [ 2211.678354] usb usb4: root hub lost power or was reset
> [ 2211.678394] usb usb1: root hub lost power or was reset
> [ 2217.764713] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> lpa 0x45E1
> [ 2228.344058] eth0: no IPv6 routers present
> [ 4870.645883] usb usb2: root hub lost power or was reset
> [ 4870.645934] usb usb3: root hub lost power or was reset
> [ 4870.645982] usb usb4: root hub lost power or was reset
> [ 4870.646022] usb usb1: root hub lost power or was reset
> [ 4874.633008] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
> lpa 0x0000
> [ 4885.216054] eth0: no IPv6 routers present
> [ 5429.702165] 8139too 0000:08:08.0: eth0: link down
> [ 5432.464123] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> lpa 0x45E1
> [ 6998.411759] usb usb2: root hub lost power or was reset
> [ 6998.411810] usb usb3: root hub lost power or was reset
> [ 6998.411861] usb usb4: root hub lost power or was reset
> [ 6998.411902] usb usb1: root hub lost power or was reset
> [ 7021.310728] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> lpa 0x45E1
> [ 7031.440033] eth0: no IPv6 routers present
> [10292.115912] 8139too 0000:08:08.0: eth0: link down
> [10293.414474] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
> lpa 0x0000
> [10587.787524] usb usb2: root hub lost power or was reset
> [10587.787575] usb usb3: root hub lost power or was reset
> [10587.787624] usb usb4: root hub lost power or was reset
> [10587.787665] usb usb1: root hub lost power or was reset
> [10685.065263] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> lpa 0x45E1
> [10695.104036] eth0: no IPv6 routers present
> [18648.785310] usb usb2: root hub lost power or was reset
> [18648.785362] usb usb3: root hub lost power or was reset
> [18648.785410] usb usb4: root hub lost power or was reset
> [18648.785452] usb usb1: root hub lost power or was reset
> [18773.173021] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> lpa 0x45E1
> [18783.264051] eth0: no IPv6 routers present
> Release Date: 03/09/2007
> Manufacturer: Hewlett-Packard
> Product Name: Presario C500 (RZ343UA#ABA)
> Serial Number: CND7160MNB
> Manufacturer: Hewlett-Packard
> Product Name: 30C6
> Serial Number: CND7160MNB
> Manufacturer: Hewlett-Packard
> Serial Number: None
> Manufacturer: Intel
> Serial Number: Not Specified
> Manufacturer: Not Specified
> Serial Number: Not Specified
> Manufacturer: Not Specified
> Serial Number: Not Specified
> lo no wireless extensions.
>
> eth0 no wireless extensions.
>
> install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi
> $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; :
> ; }
> # which ath5k cannot recover. To prevent this condition, stop
> blacklist ath_pci
> # Warning: This file is autogenerated by bcmwl. All changes to this file
> will be lost.
> blacklist b43
> blacklist b43legacy
> blacklist bcm43xx
> blacklist brcm80211
> blacklist eth1394
> # replaced by p54pci
> blacklist prism54
> # replaced by b43 and ssb.
> blacklist bcm43xx
> blacklist uart6850
> blacklist twl4030_wdt
>
> [main]
> NetworkingEnabl
> WirelessEnabled
> WWANEnabled=true
> > hal.1: read hal dataprocess 8227: arguments to dbus_move_error() were
> incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed
> in file ../../dbus/
> This is normally a bug in some application using the D-Bus library.
> libhal.c 3483 : Error unsubscribing to signals, error=The name
> org.freedesktop.Hal was not provided by any .service files
> 23: PCI 600.0: 0280 Network controller
> [Created at pci.318]
> Unique ID: vTuk.5D2YRgUfek7
> Parent ID: hoOk.9zUzlSyYv85
> SysFS ID: /devices/
> SysFS BusID: 0000:06:00.0
> Hardware Class: network
> Model: "Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN
> Controller"
> Vendor: pci 0x14e4 "Broadcom"
> Device: pci 0x4311 "BCM4311 802.11b/g WLAN"
> SubVendor: pci 0x103c "Hewlett-Packard Company"
> SubDevice: pci 0x1363 "BCM4311 802.11b/g Wireless LAN Controller"
> Revision: 0x01
> Memory Range: 0x20000000-
> IRQ: 18 (no events)
> Module Alias: "pci:v000014E4d
> Driver Info #0:
> Driver Status: ssb is not active
> Driver Activation Cmd: "modprobe ssb"
> Driver Info #1:
> Driver Status: wl is active
> Driver Activation Cmd: "modprobe wl"
> Config Status: cfg=new, avail=yes, need=no, active=unknown
> Attached to: #13 (PCI bridge)
>
> 24: PCI 808.0: 0200 Ethernet controller
> [Created at pci.318]
> Unique ID: rBUF.LI924rkRv88
> Parent ID: 6NW+.ZoShP53dxYC
> SysFS ID: /devices/
> SysFS BusID: 0000:08:08.0
> Hardware Class: network
> Model: "Realtek RTL-8139/
> Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
> Device: pci 0x8139 "RTL-8139/
> SubVendor: pci 0x103c "Hewlett-Packard Company"
> SubDevice: pci 0x30a5
> Revision: 0x10
> Driver: "8139too"
> Driver Modules: "8139too"
> Device File: eth0
> I/O Ports: 0x2000-0x2fff (rw)
> Memory Range: 0xd0100000-
> IRQ: 16 (1079653 events)
> HW Address: 00:16:d4:e9:72:9e
> Link detected: yes
> Module Alias: "pci:v000010ECd
> Driver Info #0:
> Driver Status: 8139too is active
> Driver Activation Cmd: "modprobe 8139too"
> Driver Info #1:
> Driver Status: 8139cp is active
> Driver Activation Cmd: "modprobe 8139cp"
> Config Status: cfg=new, avail=yes, need=no, active=unknown
> Attached to: #18 (PCI bridge)
> Warning: bad ps syntax, perhaps a bogus '-'? See
> http://
> root 774 0.0 0.2 26684 1208 ? Ssl Feb22 0:01
> NetworkManager
> root 7788 0.0 0.0 2736 352 ? S 15:32 0:00
> /sbin/dhclient -d -4 -sf /usr/lib/
> /var/run/
> /var/lib/
> /var/run/
> wes 8240 0.0 0.1 4188 780 pts/0 S+ 16:05 0:00 egrep
> --color=auto wpa|icd|etwork
> Module Size Used by
> nfnetlink_queue 17443 1
> nfnetlink 13983 2 nfnetlink_queue
> nf_conntrack_ipv4 19084 3
> nf_defrag_ipv4 12649 1 nf_conntrack_ipv4
> ipt_REJECT 12512 1
> xt_tcpudp 12531 2
> iptable_filter 12706 1
> ip_tables 18106 1 iptable_filter
> xt_iprange 12485 0
> bnep 17923 2
> xt_state 12514 3
> nf_conntrack 70103 2 nf_conntrack_
> xt_mark 12499 6
> xt_NFQUEUE 12630 3
> x_tables 21975 8
> ipt_REJECT,
> rfcomm 38408 0
> bluetooth 148839 10 bnep,rfcomm
> pci_stub 12550 1
> vboxpci 22882 0
> vboxnetadp 13328 0
> vboxnetflt 27211 0
> vboxdrv 251814 3 vboxpci,
> parport_pc 32114 0
> ppdev 12849 0
> snd_hda_
> binfmt_misc 17292 1
> snd_hda_intel 24262 2
> snd_hda_codec 91859 2 snd_hda_
> snd_hwdep 13276 1 snd_hda_codec
> snd_pcm 80435 2 snd_hda_
> snd_seq_midi 13132 0
> snd_rawmidi 25241 1 snd_seq_midi
> wl 2646601 0
> snd_seq_midi_event 14475 1 snd_seq_midi
> snd_seq 51567 2 snd_seq_
> i915 509519 3
> snd_timer 28932 2 snd_pcm,snd_seq
> snd_seq_device 14172 3 snd_seq_
> joydev 17393 0
> drm_kms_helper 32889 1 i915
> drm 192194 4 i915,drm_kms_helper
> hp_wmi 13652 0
> snd 55902 13
> snd_hda_
> lib80211 14570 1 wl
> sparse_keymap 13658 1 hp_wmi
> psmouse 73673 0
> soundcore 12600 1 snd
> i2c_algo_bit 13199 1 i915
> serio_raw 12990 0
> snd_page_alloc 14115 2 snd_hda_
> video 18908 1 i915
> wmi 18744 1 hp_wmi
> lp 17455 0
> parport 40930 3 parport_pc,ppdev,lp
> ahci 21634 2
> libahci 25727 1 ahci
> 8139too 23283 0
> 8139cp 22636 0
> wes@Lappy3000:~$
>
>
> On Thu, Feb 23, 2012 at 2:35 PM, Mark Rijckenberg <
> <email address hidden>> wrote:
>
>> Your question #188527 on wicd in Ubuntu changed:
>> https:/
>>
>> Status: Open => Needs information
>>
>> Mark Rijckenberg requested more information:
>> You did not follow the instructions in step 2. Your command ends with
>> lshw, but it should end with lsmod, as I explained before. Avoid using
>> the Email client to copy-paste the command.
>>
>> I will repeat the instructions here:
>>
>> Step 2: Please copy-paste the following command from
>> https:/
>> Firefox into the Linux Terminal. Do NOT copy-paste from the Email
>> message into the Terminal, as that will only copy PART of the command.
>> The command STARTS with the word sudo and ENDS with the word lsmod. So
>> please copy-paste the ENTIRE command below from Firefox into a Terminal,
>> press <enter>, then enter password when sudo asks for password, then
>> press enter again.
>>
>> --
>> To answer this request for more information, you can either reply to
>> this email or enter your reply at the following page:
>> https:/
>>
>> You received this question notification because you asked the question.
>>
>
>
>
> --
> Wes
>
>
--
Wes
Revision history for this message
|
#10 |
es@Lappy3000:~$ sudo apt-get update; sudo apt-get install hwinfo grep
rfkill; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat
/etc/network/
-short; uname -a; dmesg | egrep
'acx|at76|
dmidecode|egrep 'anufact|
/etc/modprobe.d/* | egrep
'acx|at76|
cat /var/lib/
ps -aux|egrep 'wpa|icd|etwork'; sudo lsmod
[sudo] password for wes:
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Release.gpg
Hit http://
Hit http://
Packages
Hit http://
Sources
Hit http://
Release
Hit http://
Ign http://
Hit http://
Packages
Ign http://
TranslationIndex
Hit http://
Sources
Hit http://
Sources
Hit http://
Sources
Hit http://
Sources
Hit http://
Packages
Hit http://
Sources
Hit http://
Packages
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
TranslationIndex
Hit http://
Sources
Hit http://
Sources
Hit http://
Sources
Hit http://
Packages
Hit http://
Packages
Hit http://
TranslationIndex
Hit http://
Hit http://
Hit http://
Sources
Hit http://
Sources
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
Packages
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Translation-en
Hit http://
Translation-en
Hit http://
Translation-en
Hit http://
Translation-en
Hit http://
Translation-en
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:06:00.0
version: 01
width: 32 bits
clock: 33MHz
resources: memory:
*-network
description: Ethernet interface
product: RTL-8139/
vendor: Realtek Semiconductor Co., Ltd.
physical id: 8
bus info: pci@0000:08:08.0
logical name: eth0
version: 10
serial: 00:16:d4:e9:72:9e
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
10bt-fd 100bt 100bt-fd autonegotiation
driverversion=
maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
resources: irq:16 ioport:
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS,
943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2]
(rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 1 [8086:27d0] (rev 01)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 3 [8086:27d4] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge [8086:27b9] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01)
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7
Family) SATA AHCI Controller [8086:27c5] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 01)
06:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g
WLAN [14e4:4311] (rev 01)
08:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
H/W path Device Class Description
=======
/0 bus 30C6
/0/0 memory 99KiB BIOS
/0/4 processor Intel(R) Celeron(R) M
CPU
/0/4/5 memory 1MiB L2 cache
/0/a memory 512MiB System Memory
/0/a/0 memory 512MiB SODIMM DDR2
Synchronous
/0/a/1 memory SODIMM DDR2 Synchronous
[empty]
/0/100 bridge Mobile 945GM/PM/GMS,
943/940GML a
/0/100/2 display Mobile 945GM/GMS, 943/940GML
Expr
/0/100/2.1 display Mobile 945GM/GMS/GME,
943/940GML
/0/100/1b multimedia N10/ICH 7 Family High
Definition
/0/100/1c bridge N10/ICH 7 Family PCI Express
Port
/0/100/1c.2 bridge N10/ICH 7 Family PCI Express
Port
/0/100/1c.2/0 network BCM4311 802.11b/g WLAN
/0/100/1d bus N10/ICH 7 Family USB UHCI
Control
/0/100/1d.1 bus N10/ICH 7 Family USB UHCI
Control
/0/100/1d.2 bus N10/ICH 7 Family USB UHCI
Control
/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI
Contro
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/8 eth0 network RTL-8139/
/0/100/1f bridge 82801GBM (ICH7-M) LPC
Interface B
/0/100/1f.1 scsi0 storage 82801G (ICH7 Family) IDE
Controll
/0/100/1f.1/0.0.0 /dev/cdrom disk CD-RW CRX880A
/0/100/1f.2 scsi2 storage 82801GBM/GHM (ICH7 Family)
SATA A
/0/100/1f.2/0.0.0 /dev/sda disk 80GB TOSHIBA MK8034GS
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 74GiB EXT4 volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 501MiB Extended partition
/0/100/
parti
/0/100/1f.3 bus N10/ICH 7 Family SMBus
Controller
Linux Lappy3000 3.0.0-16-generic #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC
2012 i686 i686 i386 GNU/Linux
[ 0.000000] DMI: Hewlett-Packard Presario C500 (RZ343UA#ABA)
/30C6, BIOS F.15 03/09/2007
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [c00f65c0] f65c0
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.004607] SMP alternatives: switching to UP code
[ 0.076787] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.164908] ACPI: No dock devices found.
[ 0.164911] HEST: Table not found.
[ 0.172998] usbcore: registered new interface driver usbfs
[ 0.173013] usbcore: registered new interface driver hub
[ 0.173045] usbcore: registered new device driver usb
[ 0.188057] Switching to clocksource hpet
[ 0.191993] Switched to NOHz mode on CPU #0
[ 0.232678] pnp: PnP ACPI: found 10 devices
[ 1.976391] input: Lid Switch as
/devices/
[ 1.976427] ACPI: Lid Switch [LID]
[ 2.084593] ERST: Table is not found!
[ 2.144465] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.172263] hub 1-0:1.0: USB hub found
[ 2.172709] hub 2-0:1.0: USB hub found
[ 2.173017] hub 3-0:1.0: USB hub found
[ 2.173321] hub 4-0:1.0: USB hub found
[ 2.639149] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.682875] isapnp: No Plug & Play device found
[ 2.915170] 8139too 0000:08:08.0: eth0: RealTek RTL8139 at 0x2000,
00:16:d4:e9:72:9e, IRQ 16
[ 21.139184] lp: driver loaded but no devices found
[ 23.936828] leds_ss4200: no LED devices found
[ 25.821055] Console: switching to colour frame buffer device 160x50
[ 26.809901] wl: module license 'MIXED/Proprietary' taints kernel.
[ 26.837790] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.837800] wl 0000:06:00.0: setting latency timer to 64
[ 26.840417] eth%d: 5.100.82.38 driver failed with code 21
[ 29.827873] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 30.429093] vboxdrv: Found 1 processor cores.
[ 30.490661] vboxpci: IOMMU not found (not registered)
[ 40.208017] eth0: no IPv6 routers present
[ 2211.678253] usb usb2: root hub lost power or was reset
[ 2211.678305] usb usb3: root hub lost power or was reset
[ 2211.678354] usb usb4: root hub lost power or was reset
[ 2211.678394] usb usb1: root hub lost power or was reset
[ 2217.764713] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 2228.344058] eth0: no IPv6 routers present
[ 4870.645883] usb usb2: root hub lost power or was reset
[ 4870.645934] usb usb3: root hub lost power or was reset
[ 4870.645982] usb usb4: root hub lost power or was reset
[ 4870.646022] usb usb1: root hub lost power or was reset
[ 4874.633008] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[ 4885.216054] eth0: no IPv6 routers present
[ 5429.702165] 8139too 0000:08:08.0: eth0: link down
[ 5432.464123] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 6998.411759] usb usb2: root hub lost power or was reset
[ 6998.411810] usb usb3: root hub lost power or was reset
[ 6998.411861] usb usb4: root hub lost power or was reset
[ 6998.411902] usb usb1: root hub lost power or was reset
[ 7021.310728] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 7031.440033] eth0: no IPv6 routers present
[10292.115912] 8139too 0000:08:08.0: eth0: link down
[10293.414474] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[10587.787524] usb usb2: root hub lost power or was reset
[10587.787575] usb usb3: root hub lost power or was reset
[10587.787624] usb usb4: root hub lost power or was reset
[10587.787665] usb usb1: root hub lost power or was reset
[10685.065263] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[10695.104036] eth0: no IPv6 routers present
[18648.785310] usb usb2: root hub lost power or was reset
[18648.785362] usb usb3: root hub lost power or was reset
[18648.785410] usb usb4: root hub lost power or was reset
[18648.785452] usb usb1: root hub lost power or was reset
[18773.173021] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[18783.264051] eth0: no IPv6 routers present
Release Date: 03/09/2007
Manufacturer: Hewlett-Packard
Product Name: Presario C500 (RZ343UA#ABA)
Serial Number: CND7160MNB
Manufacturer: Hewlett-Packard
Product Name: 30C6
Serial Number: CND7160MNB
Manufacturer: Hewlett-Packard
Serial Number: None
Manufacturer: Intel
Serial Number: Not Specified
Manufacturer: Not Specified
Serial Number: Not Specified
Manufacturer: Not Specified
Serial Number: Not Specified
lo no wireless extensions.
eth0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi
$CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; :
; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
# Warning: This file is autogenerated by bcmwl. All changes to this file
will be lost.
blacklist b43
blacklist b43legacy
blacklist bcm43xx
blacklist brcm80211
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
> hal.1: read hal dataprocess 8227: arguments to dbus_move_error() were
incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed
in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name
org.freedesktop.Hal was not provided by any .service files
23: PCI 600.0: 0280 Network controller
[Created at pci.318]
Unique ID: vTuk.5D2YRgUfek7
Parent ID: hoOk.9zUzlSyYv85
SysFS ID: /devices/
SysFS BusID: 0000:06:00.0
Hardware Class: network
Model: "Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4311 "BCM4311 802.11b/g WLAN"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x1363 "BCM4311 802.11b/g Wireless LAN Controller"
Revision: 0x01
Memory Range: 0x20000000-
IRQ: 18 (no events)
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is not active
Driver Activation Cmd: "modprobe ssb"
Driver Info #1:
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
24: PCI 808.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.LI924rkRv88
Parent ID: 6NW+.ZoShP53dxYC
SysFS ID: /devices/
SysFS BusID: 0000:08:08.0
Hardware Class: network
Model: "Realtek RTL-8139/
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8139 "RTL-8139/
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30a5
Revision: 0x10
Driver: "8139too"
Driver Modules: "8139too"
Device File: eth0
I/O Ports: 0x2000-0x2fff (rw)
Memory Range: 0xd0100000-
IRQ: 16 (1079653 events)
HW Address: 00:16:d4:e9:72:9e
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: 8139too is active
Driver Activation Cmd: "modprobe 8139too"
Driver Info #1:
Driver Status: 8139cp is active
Driver Activation Cmd: "modprobe 8139cp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See
http://
root 774 0.0 0.2 26684 1208 ? Ssl Feb22 0:01
NetworkManager
root 7788 0.0 0.0 2736 352 ? S 15:32 0:00
/sbin/dhclient -d -4 -sf /usr/lib/
/var/run/
/var/lib/
/var/run/
wes 8240 0.0 0.1 4188 780 pts/0 S+ 16:05 0:00 egrep
--color=auto wpa|icd|etwork
Module Size Used by
nfnetlink_queue 17443 1
nfnetlink 13983 2 nfnetlink_queue
nf_conntrack_ipv4 19084 3
nf_defrag_ipv4 12649 1 nf_conntrack_ipv4
ipt_REJECT 12512 1
xt_tcpudp 12531 2
iptable_filter 12706 1
ip_tables 18106 1 iptable_filter
xt_iprange 12485 0
bnep 17923 2
xt_state 12514 3
nf_conntrack 70103 2 nf_conntrack_
xt_mark 12499 6
xt_NFQUEUE 12630 3
x_tables 21975 8
ipt_REJECT,
rfcomm 38408 0
bluetooth 148839 10 bnep,rfcomm
pci_stub 12550 1
vboxpci 22882 0
vboxnetadp 13328 0
vboxnetflt 27211 0
vboxdrv 251814 3 vboxpci,
parport_pc 32114 0
ppdev 12849 0
snd_hda_
binfmt_misc 17292 1
snd_hda_intel 24262 2
snd_hda_codec 91859 2 snd_hda_
snd_hwdep 13276 1 snd_hda_codec
snd_pcm 80435 2 snd_hda_
snd_seq_midi 13132 0
snd_rawmidi 25241 1 snd_seq_midi
wl 2646601 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51567 2 snd_seq_
i915 509519 3
snd_timer 28932 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_
joydev 17393 0
drm_kms_helper 32889 1 i915
drm 192194 4 i915,drm_kms_helper
hp_wmi 13652 0
snd 55902 13
snd_hda_
lib80211 14570 1 wl
sparse_keymap 13658 1 hp_wmi
psmouse 73673 0
soundcore 12600 1 snd
i2c_algo_bit 13199 1 i915
serio_raw 12990 0
snd_page_alloc 14115 2 snd_hda_
video 18908 1 i915
wmi 18744 1 hp_wmi
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
ahci 21634 2
libahci 25727 1 ahci
8139too 23283 0
8139cp 22636 0
wes@Lappy3000:~$
On Thu, Feb 23, 2012 at 2:35 PM, Mark Rijckenberg <
<email address hidden>> wrote:
> Your question #188527 on wicd in Ubuntu changed:
> https:/
>
> Status: Open => Needs information
>
> Mark Rijckenberg requested more information:
> You did not follow the instructions in step 2. Your command ends with
> lshw, but it should end with lsmod, as I explained before. Avoid using
> the Email client to copy-paste the command.
>
> I will repeat the instructions here:
>
> Step 2: Please copy-paste the following command from
> https:/
> Firefox into the Linux Terminal. Do NOT copy-paste from the Email
> message into the Terminal, as that will only copy PART of the command.
> The command STARTS with the word sudo and ENDS with the word lsmod. So
> please copy-paste the ENTIRE command below from Firefox into a Terminal,
> press <enter>, then enter password when sudo asks for password, then
> press enter again.
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https:/
>
> You received this question notification because you asked the question.
>
--
Wes
Revision history for this message
|
#11 |
wes@Lappy3000:~$ sudo apt-get update; sudo apt-get install hwinfo grep
rfkill; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat
/etc/network/
-short; uname -a; dmesg | egrep
'acx|at76|
dmidecode|egrep 'anufact|
/etc/modprobe.d/* | egrep
'acx|at76|
cat /var/lib/
ps -aux|egrep 'wpa|icd|etwork'; sudo lsmod
[sudo] password for wes:
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Sources
Hit http://
Packages
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
TranslationIndex
Hit http://
Packages
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
TranslationIndex
Hit http://
Packages
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Translation-en
Hit http://
TranslationIndex
Hit http://
Hit http://
Hit http://
Hit http://
Sources
Hit http://
Translation-en
Hit http://
Translation-en
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
Packages
Hit http://
TranslationIndex
Hit http://
Translation-en
Hit http://
TranslationIndex
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:06:00.0
version: 01
width: 32 bits
clock: 33MHz
resources: memory:
*-network
description: Ethernet interface
product: RTL-8139/
vendor: Realtek Semiconductor Co., Ltd.
physical id: 8
bus info: pci@0000:08:08.0
logical name: eth0
version: 10
serial: 00:16:d4:e9:72:9e
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
10bt-fd 100bt 100bt-fd autonegotiation
driverversion=
maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
resources: irq:16 ioport:
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS,
943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2]
(rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 1 [8086:27d0] (rev 01)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 3 [8086:27d4] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge [8086:27b9] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01)
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7
Family) SATA AHCI Controller [8086:27c5] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 01)
06:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g
WLAN [14e4:4311] (rev 01)
08:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
H/W path Device Class Description
=======
/0 bus 30C6
/0/0 memory 99KiB BIOS
/0/4 processor Intel(R) Celeron(R) M
CPU
/0/4/5 memory 1MiB L2 cache
/0/a memory 512MiB System Memory
/0/a/0 memory 512MiB SODIMM DDR2
Synchronous
/0/a/1 memory SODIMM DDR2 Synchronous
[empty]
/0/100 bridge Mobile 945GM/PM/GMS,
943/940GML a
/0/100/2 display Mobile 945GM/GMS, 943/940GML
Expr
/0/100/2.1 display Mobile 945GM/GMS/GME,
943/940GML
/0/100/1b multimedia N10/ICH 7 Family High
Definition
/0/100/1c bridge N10/ICH 7 Family PCI Express
Port
/0/100/1c.2 bridge N10/ICH 7 Family PCI Express
Port
/0/100/1c.2/0 network BCM4311 802.11b/g WLAN
/0/100/1d bus N10/ICH 7 Family USB UHCI
Control
/0/100/1d.1 bus N10/ICH 7 Family USB UHCI
Control
/0/100/1d.2 bus N10/ICH 7 Family USB UHCI
Control
/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI
Contro
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/8 eth0 network RTL-8139/
/0/100/1f bridge 82801GBM (ICH7-M) LPC
Interface B
/0/100/1f.1 scsi0 storage 82801G (ICH7 Family) IDE
Controll
/0/100/1f.1/0.0.0 /dev/cdrom disk CD-RW CRX880A
/0/100/1f.2 scsi2 storage 82801GBM/GHM (ICH7 Family)
SATA A
/0/100/1f.2/0.0.0 /dev/sda disk 80GB TOSHIBA MK8034GS
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 74GiB EXT4 volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 501MiB Extended partition
/0/100/
parti
/0/100/1f.3 bus N10/ICH 7 Family SMBus
Controller
Linux Lappy3000 3.0.0-16-generic #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC
2012 i686 i686 i386 GNU/Linux
[ 0.000000] DMI: Hewlett-Packard Presario C500 (RZ343UA#ABA)
/30C6, BIOS F.15 03/09/2007
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [c00f65c0] f65c0
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.004607] SMP alternatives: switching to UP code
[ 0.076787] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.164908] ACPI: No dock devices found.
[ 0.164911] HEST: Table not found.
[ 0.172998] usbcore: registered new interface driver usbfs
[ 0.173013] usbcore: registered new interface driver hub
[ 0.173045] usbcore: registered new device driver usb
[ 0.188057] Switching to clocksource hpet
[ 0.191993] Switched to NOHz mode on CPU #0
[ 0.232678] pnp: PnP ACPI: found 10 devices
[ 1.976391] input: Lid Switch as
/devices/
[ 1.976427] ACPI: Lid Switch [LID]
[ 2.084593] ERST: Table is not found!
[ 2.144465] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.172263] hub 1-0:1.0: USB hub found
[ 2.172709] hub 2-0:1.0: USB hub found
[ 2.173017] hub 3-0:1.0: USB hub found
[ 2.173321] hub 4-0:1.0: USB hub found
[ 2.639149] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.682875] isapnp: No Plug & Play device found
[ 2.915170] 8139too 0000:08:08.0: eth0: RealTek RTL8139 at 0x2000,
00:16:d4:e9:72:9e, IRQ 16
[ 21.139184] lp: driver loaded but no devices found
[ 23.936828] leds_ss4200: no LED devices found
[ 25.821055] Console: switching to colour frame buffer device 160x50
[ 26.809901] wl: module license 'MIXED/Proprietary' taints kernel.
[ 26.837790] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.837800] wl 0000:06:00.0: setting latency timer to 64
[ 26.840417] eth%d: 5.100.82.38 driver failed with code 21
[ 29.827873] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 30.429093] vboxdrv: Found 1 processor cores.
[ 30.490661] vboxpci: IOMMU not found (not registered)
[ 40.208017] eth0: no IPv6 routers present
[ 2211.678253] usb usb2: root hub lost power or was reset
[ 2211.678305] usb usb3: root hub lost power or was reset
[ 2211.678354] usb usb4: root hub lost power or was reset
[ 2211.678394] usb usb1: root hub lost power or was reset
[ 2217.764713] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 2228.344058] eth0: no IPv6 routers present
[ 4870.645883] usb usb2: root hub lost power or was reset
[ 4870.645934] usb usb3: root hub lost power or was reset
[ 4870.645982] usb usb4: root hub lost power or was reset
[ 4870.646022] usb usb1: root hub lost power or was reset
[ 4874.633008] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[ 4885.216054] eth0: no IPv6 routers present
[ 5429.702165] 8139too 0000:08:08.0: eth0: link down
[ 5432.464123] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 6998.411759] usb usb2: root hub lost power or was reset
[ 6998.411810] usb usb3: root hub lost power or was reset
[ 6998.411861] usb usb4: root hub lost power or was reset
[ 6998.411902] usb usb1: root hub lost power or was reset
[ 7021.310728] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[ 7031.440033] eth0: no IPv6 routers present
[10292.115912] 8139too 0000:08:08.0: eth0: link down
[10293.414474] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[10587.787524] usb usb2: root hub lost power or was reset
[10587.787575] usb usb3: root hub lost power or was reset
[10587.787624] usb usb4: root hub lost power or was reset
[10587.787665] usb usb1: root hub lost power or was reset
[10685.065263] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[10695.104036] eth0: no IPv6 routers present
[18648.785310] usb usb2: root hub lost power or was reset
[18648.785362] usb usb3: root hub lost power or was reset
[18648.785410] usb usb4: root hub lost power or was reset
[18648.785452] usb usb1: root hub lost power or was reset
[18773.173021] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
[18783.264051] eth0: no IPv6 routers present
Release Date: 03/09/2007
Manufacturer: Hewlett-Packard
Product Name: Presario C500 (RZ343UA#ABA)
Serial Number: CND7160MNB
Manufacturer: Hewlett-Packard
Product Name: 30C6
Serial Number: CND7160MNB
Manufacturer: Hewlett-Packard
Serial Number: None
Manufacturer: Intel
Serial Number: Not Specified
Manufacturer: Not Specified
Serial Number: Not Specified
Manufacturer: Not Specified
Serial Number: Not Specified
lo no wireless extensions.
eth0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi
$CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; :
; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
# Warning: This file is autogenerated by bcmwl. All changes to this file
will be lost.
blacklist b43
blacklist b43legacy
blacklist bcm43xx
blacklist brcm80211
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
> hal.1: read hal dataprocess 8549: arguments to dbus_move_error() were
incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed
in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name
org.freedesktop.Hal was not provided by any .service files
23: PCI 600.0: 0280 Network controller
[Created at pci.318]
Unique ID: vTuk.5D2YRgUfek7
Parent ID: hoOk.9zUzlSyYv85
SysFS ID: /devices/
SysFS BusID: 0000:06:00.0
Hardware Class: network
Model: "Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4311 "BCM4311 802.11b/g WLAN"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x1363 "BCM4311 802.11b/g Wireless LAN Controller"
Revision: 0x01
Memory Range: 0x20000000-
IRQ: 18 (no events)
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is not active
Driver Activation Cmd: "modprobe ssb"
Driver Info #1:
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
24: PCI 808.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.LI924rkRv88
Parent ID: 6NW+.ZoShP53dxYC
SysFS ID: /devices/
SysFS BusID: 0000:08:08.0
Hardware Class: network
Model: "Realtek RTL-8139/
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8139 "RTL-8139/
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30a5
Revision: 0x10
Driver: "8139too"
Driver Modules: "8139too"
Device File: eth0
I/O Ports: 0x2000-0x2fff (rw)
Memory Range: 0xd0100000-
IRQ: 16 (1138446 events)
HW Address: 00:16:d4:e9:72:9e
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: 8139too is active
Driver Activation Cmd: "modprobe 8139too"
Driver Info #1:
Driver Status: 8139cp is active
Driver Activation Cmd: "modprobe 8139cp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See
http://
root 774 0.0 0.2 26684 1424 ? Ssl Feb22 0:01
NetworkManager
root 7788 0.0 0.0 2736 312 ? S 15:32 0:00
/sbin/dhclient -d -4 -sf /usr/lib/
/var/run/
/var/lib/
/var/run/
wes 8561 0.0 0.1 4188 776 pts/0 S+ 16:23 0:00 egrep
--color=auto wpa|icd|etwork
Module Size Used by
nfnetlink_queue 17443 1
nfnetlink 13983 2 nfnetlink_queue
nf_conntrack_ipv4 19084 3
nf_defrag_ipv4 12649 1 nf_conntrack_ipv4
ipt_REJECT 12512 1
xt_tcpudp 12531 2
iptable_filter 12706 1
ip_tables 18106 1 iptable_filter
xt_iprange 12485 0
bnep 17923 2
xt_state 12514 3
nf_conntrack 70103 2 nf_conntrack_
xt_mark 12499 6
xt_NFQUEUE 12630 3
x_tables 21975 8
ipt_REJECT,
rfcomm 38408 0
bluetooth 148839 10 bnep,rfcomm
pci_stub 12550 1
vboxpci 22882 0
vboxnetadp 13328 0
vboxnetflt 27211 0
vboxdrv 251814 3 vboxpci,
parport_pc 32114 0
ppdev 12849 0
snd_hda_
binfmt_misc 17292 1
snd_hda_intel 24262 2
snd_hda_codec 91859 2 snd_hda_
snd_hwdep 13276 1 snd_hda_codec
snd_pcm 80435 2 snd_hda_
snd_seq_midi 13132 0
snd_rawmidi 25241 1 snd_seq_midi
wl 2646601 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51567 2 snd_seq_
i915 509519 3
snd_timer 28932 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_
joydev 17393 0
drm_kms_helper 32889 1 i915
drm 192194 4 i915,drm_kms_helper
hp_wmi 13652 0
snd 55902 13
snd_hda_
lib80211 14570 1 wl
sparse_keymap 13658 1 hp_wmi
psmouse 73673 0
soundcore 12600 1 snd
i2c_algo_bit 13199 1 i915
serio_raw 12990 0
snd_page_alloc 14115 2 snd_hda_
video 18908 1 i915
wmi 18744 1 hp_wmi
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
ahci 21634 2
libahci 25727 1 ahci
8139too 23283 0
8139cp 22636 0
wes@Lappy3000:~$
On Thu, Feb 23, 2012 at 4:15 PM, Wes McAtee <
<email address hidden>> wrote:
> Your question #188527 on wicd in Ubuntu changed:
> https:/
>
> Status: Needs information => Open
>
> You gave more information on the question:
> I sent the command but the only way to get terminal results to you is to
> copy and past into this reply. What am I doing wrong?
>
> On Thu, Feb 23, 2012 at 4:11 PM, Wes <email address hidden> wrote:
>
> > es@Lappy3000:~$ sudo apt-get update; sudo apt-get install hwinfo grep
> > rfkill; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat
> > /etc/network/
> lshw
> > -short; uname -a; dmesg | egrep
> >
> 'acx|at76|
> > dmidecode|egrep 'anufact|
> > /etc/modprobe.d/* | egrep
> >
> 'acx|at76|
> > cat /var/lib/
> > ps -aux|egrep 'wpa|icd|etwork'; sudo lsmod
> > [sudo] password for wes:
> > Ign http://
> >
> > Ign http://
> > Ign http://
> > Ign http://
> > Hit http://
> > Hit http://
> >
> > Hit http://
> > Hit http://
> > Hit http://
> > Hit http://
> > Ign http://
> > Hit http://
> > Release.gpg
> > Hit http://
> > Hit http://
> > Packages
> > Hit http://
> > Sources
> > Hit http://
> > Release
> > Hit http://
> > Ign http://
> > Hit http://
> > Packages
> > Ign http://
> > TranslationIndex
> > Hit http://
> > Sources
> > Hit http://
> > Sources
> > Hit http://
> > Sources
> > Hit http://
> > Sources
> > Hit http://
> > Packages
> > Hit http://
> > Sources
> > Hit http://
> > Packages
> > Hit http://
> > Hit http://
> > Hit http://
> > Hit http://
> > Hit http://
> > TranslationIndex
> > Hit http://
> > Sources
> > Hit http://
> > Sources
> > Hit http://
> > Sources
> > Hit http://
> > Packages
> > Hit http://
> > Packages
> > Hit http://
> > TranslationIndex
> > Hit http://
> > Hit http://
> > Hit http://
> > Sources
> > Hit http://
> > Sources
> > Hit http://
> > Packages
> > Hit http://
> > Packages
> > Hit http://
> > Packages
> > Hit http://
> > Packages
> > Hit http://
> > Packages
> > Hit http://
> > TranslationIndex
> > Hit http://
> > TranslationIndex
> > Hit http://
> > TranslationIndex
> > Hit http://
> > Packages
> > Hit http://
> > TranslationIndex
> > Hit http://
> > TranslationIndex
> > Hit http://
> > TranslationIndex
> > Hit http://
> > TranslationIndex
> > Hit http://
> TranslationIndex
> >
> > Hit http://
> > Hit http://
> > Hit http://
> >
> > Hit http://
> > Hit http://
> > Hit http://
> Translation-en
> > Hit http://
> Translation-en
> > Hit http://
> > Translation-en
> > Hit http://
> > Translation-en
> > Hit http://
> > Translation-en
> > Hit http://
> > Translation-en
> > Hit http://
> > Translation-en
> > Ign http://
> > Ign http://
> > Ign http://
> > Ign http://
> > Reading package lists... Done
> > Reading package lists... Done
> > Building dependency tree
> > Reading state information... Done
> > grep is already the newest version.
> > rfkill is already the newest version.
> > hwinfo is already the newest version.
> > 0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
> > *-network UNCLAIMED
> > description: Network controller
> > product: BCM4311 802.11b/g WLAN
> > vendor: Broadcom Corporation
> > physical id: 0
> > bus info: pci@0000:06:00.0
> > version: 01
> > width: 32 bits
> > clock: 33MHz
> > capabilities: pm msi pciexpress bus_master cap_list
> > configuration: latency=0
> > resources: memory:
> > *-network
> > description: Ethernet interface
> > product: RTL-8139/
> > vendor: Realtek Semiconductor Co., Ltd.
> > physical id: 8
> > bus info: pci@0000:08:08.0
> > logical name: eth0
> > version: 10
> > serial: 00:16:d4:e9:72:9e
> > size: 100Mbit/s
> > capacity: 100Mbit/s
> > width: 32 bits
> > clock: 33MHz
> > capabilities: pm bus_master cap_list ethernet physical tp mii 10bt
> > 10bt-fd 100bt 100bt-fd autonegotiation
> > configuration: autonegotiation=on broadcast=yes driver=8139too
> > driverversion=
> > maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
> > resources: irq:16 ioport:
> > 0: hp-wifi: Wireless LAN
> > Soft blocked: no
> > Hard blocked: yes
> > lo Interface doesn't support scanning.
> >
> > eth0 Interface doesn't support scanning.
> >
> > auto lo
> > iface lo inet loopback
> >
> > DISTRIB_ID=Ubuntu
> > DISTRIB_
> > DISTRIB_
> > DISTRIB_
> > 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS,
> > 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
> > 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
> > 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2]
> > (rev 03)
> > 00:02.1 Display controller [0380]: Intel Corporation Mobile
> 945GM/GMS/GME,
> > 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
> > 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
> > Definition Audio Controller [8086:27d8] (rev 01)
> > 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> > Port 1 [8086:27d0] (rev 01)
> > 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> > Port 3 [8086:27d4] (rev 01)
> > 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
> UHCI
> > Controller #1 [8086:27c8] (rev 01)
> > 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
> UHCI
> > Controller #2 [8086:27c9] (rev 01)
> > 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
> UHCI
> > Controller #3 [8086:27ca] (rev 01)
> > 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2
> > EHCI Controller [8086:27cc] (rev 01)
> > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> > [8086:2448] (rev e1)
> > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
> > Interface Bridge [8086:27b9] (rev 01)
> > 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
> > Controller [8086:27df] (rev 01)
> > 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7
> > Family) SATA AHCI Controller [8086:27c5] (rev 01)
> > 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
> > [8086:27da] (rev 01)
> > 06:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g
> > WLAN [14e4:4311] (rev 01)
> > 08:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> > RTL-8139/
> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > H/W path Device Class Description
> > =======
> > system Notebook
> > /0 bus 30C6
> > /0/0 memory 99KiB BIOS
> > /0/4 processor Intel(R) Celeron(R) M
> > CPU
> > /0/4/5 memory 1MiB L2 cache
> > /0/a memory 512MiB System Memory
> > /0/a/0 memory 512MiB SODIMM DDR2
> > Synchronous
> > /0/a/1 memory SODIMM DDR2 Synchronous
> > [empty]
> > /0/100 bridge Mobile 945GM/PM/GMS,
> > 943/940GML a
> > /0/100/2 display Mobile 945GM/GMS,
> > 943/940GML Expr
> > /0/100/2.1 display Mobile 945GM/GMS/GME,
> > 943/940GML
> > /0/100/1b multimedia N10/ICH 7 Family High
> > Definition
> > /0/100/1c bridge N10/ICH 7 Family PCI
> > Express Port
> > /0/100/1c.2 bridge N10/ICH 7 Family PCI
> > Express Port
> > /0/100/1c.2/0 network BCM4311 802.11b/g WLAN
> > /0/100/1d bus N10/ICH 7 Family USB UHCI
> > Control
> > /0/100/1d.1 bus N10/ICH 7 Family USB UHCI
> > Control
> > /0/100/1d.2 bus N10/ICH 7 Family USB UHCI
> > Control
> > /0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI
> > Contro
> > /0/100/1e bridge 82801 Mobile PCI Bridge
> > /0/100/1e/8 eth0 network RTL-8139/
> > /0/100/1f bridge 82801GBM (ICH7-M) LPC
> > Interface B
> > /0/100/1f.1 scsi0 storage 82801G (ICH7 Family) IDE
> > Controll
> > /0/100/1f.1/0.0.0 /dev/cdrom disk CD-RW CRX880A
> > /0/100/1f.2 scsi2 storage 82801GBM/GHM (ICH7 Family)
> > SATA A
> > /0/100/1f.2/0.0.0 /dev/sda disk 80GB TOSHIBA MK8034GS
> > /0/100/1f.2/0.0.0/1 /dev/sda1 volume 74GiB EXT4 volume
> > /0/100/1f.2/0.0.0/2 /dev/sda2 volume 501MiB Extended partition
> > /0/100/
> Solaris
> > parti
> > /0/100/1f.3 bus N10/ICH 7 Family SMBus
> > Controller
> > Linux Lappy3000 3.0.0-16-generic #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC
> > 2012 i686 i686 i386 GNU/Linux
> > [ 0.000000] DMI: Hewlett-Packard Presario C500 (RZ343UA#ABA)
> > /30C6, BIOS F.15 03/09/2007
> > [ 0.000000] Found optimal setting for mtrr clean up
> > [ 0.000000] found SMP MP-table at [c00f65c0] f65c0
> > [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
> > [ 0.004607] SMP alternatives: switching to UP code
> > [ 0.076787] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> > [ 0.164908] ACPI: No dock devices found.
> > [ 0.164911] HEST: Table not found.
> > [ 0.172998] usbcore: registered new interface driver usbfs
> >
> > [ 0.173013] usbcore: registered new interface driver hub
> > [ 0.173045] usbcore: registered new device driver usb
> > [ 0.188057] Switching to clocksource hpet
> >
> > [ 0.191993] Switched to NOHz mode on CPU #0
> > [ 0.232678] pnp: PnP ACPI: found 10 devices
> > [ 1.976391] input: Lid Switch as
> > /devices/
> > [ 1.976427] ACPI: Lid Switch [LID]
> > [ 2.084593] ERST: Table is not found!
> > [ 2.144465] ehci_hcd 0000:00:1d.7: using broken periodic workaround
> > [ 2.172263] hub 1-0:1.0: USB hub found
> > [ 2.172709] hub 2-0:1.0: USB hub found
> > [ 2.173017] hub 3-0:1.0: USB hub found
> > [ 2.173321] hub 4-0:1.0: USB hub found
> > [ 2.639149] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> > [ 2.682875] isapnp: No Plug & Play device found
> > [ 2.915170] 8139too 0000:08:08.0: eth0: RealTek RTL8139 at 0x2000,
> > 00:16:d4:e9:72:9e, IRQ 16
> > [ 21.139184] lp: driver loaded but no devices found
> > [ 23.936828] leds_ss4200: no LED devices found
> > [ 25.821055] Console: switching to colour frame buffer device 160x50
> > [ 26.809901] wl: module license 'MIXED/Proprietary' taints kernel.
> > [ 26.837790] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
> 18
> > [ 26.837800] wl 0000:06:00.0: setting latency timer to 64
> > [ 26.840417] eth%d: 5.100.82.38 driver failed with code 21
> > [ 29.827873] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> > lpa 0x45E1
> > [ 30.429093] vboxdrv: Found 1 processor cores.
> > [ 30.490661] vboxpci: IOMMU not found (not registered)
> > [ 40.208017] eth0: no IPv6 routers present
> > [ 2211.678253] usb usb2: root hub lost power or was reset
> > [ 2211.678305] usb usb3: root hub lost power or was reset
> > [ 2211.678354] usb usb4: root hub lost power or was reset
> > [ 2211.678394] usb usb1: root hub lost power or was reset
> > [ 2217.764713] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> > lpa 0x45E1
> > [ 2228.344058] eth0: no IPv6 routers present
> > [ 4870.645883] usb usb2: root hub lost power or was reset
> > [ 4870.645934] usb usb3: root hub lost power or was reset
> > [ 4870.645982] usb usb4: root hub lost power or was reset
> > [ 4870.646022] usb usb1: root hub lost power or was reset
> > [ 4874.633008] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
> > lpa 0x0000
> > [ 4885.216054] eth0: no IPv6 routers present
> > [ 5429.702165] 8139too 0000:08:08.0: eth0: link down
> > [ 5432.464123] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> > lpa 0x45E1
> > [ 6998.411759] usb usb2: root hub lost power or was reset
> > [ 6998.411810] usb usb3: root hub lost power or was reset
> > [ 6998.411861] usb usb4: root hub lost power or was reset
> > [ 6998.411902] usb usb1: root hub lost power or was reset
> > [ 7021.310728] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> > lpa 0x45E1
> > [ 7031.440033] eth0: no IPv6 routers present
> > [10292.115912] 8139too 0000:08:08.0: eth0: link down
> > [10293.414474] 8139too 0000:08:08.0: eth0: link up, 10Mbps, half-duplex,
> > lpa 0x0000
> > [10587.787524] usb usb2: root hub lost power or was reset
> > [10587.787575] usb usb3: root hub lost power or was reset
> > [10587.787624] usb usb4: root hub lost power or was reset
> > [10587.787665] usb usb1: root hub lost power or was reset
> > [10685.065263] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> > lpa 0x45E1
> > [10695.104036] eth0: no IPv6 routers present
> > [18648.785310] usb usb2: root hub lost power or was reset
> > [18648.785362] usb usb3: root hub lost power or was reset
> > [18648.785410] usb usb4: root hub lost power or was reset
> > [18648.785452] usb usb1: root hub lost power or was reset
> > [18773.173021] 8139too 0000:08:08.0: eth0: link up, 100Mbps, full-duplex,
> > lpa 0x45E1
> > [18783.264051] eth0: no IPv6 routers present
> > Release Date: 03/09/2007
> > Manufacturer: Hewlett-Packard
> > Product Name: Presario C500 (RZ343UA#ABA)
> > Serial Number: CND7160MNB
> > Manufacturer: Hewlett-Packard
> > Product Name: 30C6
> > Serial Number: CND7160MNB
> > Manufacturer: Hewlett-Packard
> > Serial Number: None
> > Manufacturer: Intel
> > Serial Number: Not Specified
> > Manufacturer: Not Specified
> > Serial Number: Not Specified
> > Manufacturer: Not Specified
> > Serial Number: Not Specified
> > lo no wireless extensions.
> >
> > eth0 no wireless extensions.
> >
> > install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi
> > $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ;
> :
> > ; }
> > # which ath5k cannot recover. To prevent this condition, stop
> > blacklist ath_pci
> > # Warning: This file is autogenerated by bcmwl. All changes to this file
> > will be lost.
> > blacklist b43
> > blacklist b43legacy
> > blacklist bcm43xx
> > blacklist brcm80211
> > blacklist eth1394
> > # replaced by p54pci
> > blacklist prism54
> > # replaced by b43 and ssb.
> > blacklist bcm43xx
> > blacklist uart6850
> > blacklist twl4030_wdt
> >
> > [main]
> > NetworkingEnabl
> > WirelessEnabled
> > WWANEnabled=true
> > > hal.1: read hal dataprocess 8227: arguments to dbus_move_error() were
> > incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))"
> failed
> > in file ../../dbus/
> > This is normally a bug in some application using the D-Bus library.
> > libhal.c 3483 : Error unsubscribing to signals, error=The name
> > org.freedesktop.Hal was not provided by any .service files
> > 23: PCI 600.0: 0280 Network controller
> > [Created at pci.318]
> > Unique ID: vTuk.5D2YRgUfek7
> > Parent ID: hoOk.9zUzlSyYv85
> > SysFS ID: /devices/
> > SysFS BusID: 0000:06:00.0
> > Hardware Class: network
> > Model: "Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN
> > Controller"
> > Vendor: pci 0x14e4 "Broadcom"
> > Device: pci 0x4311 "BCM4311 802.11b/g WLAN"
> > SubVendor: pci 0x103c "Hewlett-Packard Company"
> > SubDevice: pci 0x1363 "BCM4311 802.11b/g Wireless LAN Controller"
> > Revision: 0x01
> > Memory Range: 0x20000000-
> > IRQ: 18 (no events)
> > Module Alias: "pci:v000014E4d
> > Driver Info #0:
> > Driver Status: ssb is not active
> > Driver Activation Cmd: "modprobe ssb"
> > Driver Info #1:
> > Driver Status: wl is active
> > Driver Activation Cmd: "modprobe wl"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> > Attached to: #13 (PCI bridge)
> >
> > 24: PCI 808.0: 0200 Ethernet controller
> > [Created at pci.318]
> > Unique ID: rBUF.LI924rkRv88
> > Parent ID: 6NW+.ZoShP53dxYC
> > SysFS ID: /devices/
> > SysFS BusID: 0000:08:08.0
> > Hardware Class: network
> > Model: "Realtek RTL-8139/
> > Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
> > Device: pci 0x8139 "RTL-8139/
> > SubVendor: pci 0x103c "Hewlett-Packard Company"
> > SubDevice: pci 0x30a5
> > Revision: 0x10
> > Driver: "8139too"
> > Driver Modules: "8139too"
> > Device File: eth0
> > I/O Ports: 0x2000-0x2fff (rw)
> > Memory Range: 0xd0100000-
> > IRQ: 16 (1079653 events)
> > HW Address: 00:16:d4:e9:72:9e
> > Link detected: yes
> > Module Alias: "pci:v000010ECd
> > Driver Info #0:
> > Driver Status: 8139too is active
> > Driver Activation Cmd: "modprobe 8139too"
> > Driver Info #1:
> > Driver Status: 8139cp is active
> > Driver Activation Cmd: "modprobe 8139cp"
> > Config Status: cfg=new, avail=yes, need=no, active=unknown
> > Attached to: #18 (PCI bridge)
> > Warning: bad ps syntax, perhaps a bogus '-'? See
> > http://
> > root 774 0.0 0.2 26684 1208 ? Ssl Feb22 0:01
> > NetworkManager
> > root 7788 0.0 0.0 2736 352 ? S 15:32 0:00
> > /sbin/dhclient -d -4 -sf /usr/lib/
> -pf
> > /var/run/
> > /var/lib/
> -cf
> > /var/run/
> > wes 8240 0.0 0.1 4188 780 pts/0 S+ 16:05 0:00 egrep
> > --color=auto wpa|icd|etwork
> > Module Size Used by
> > nfnetlink_queue 17443 1
> > nfnetlink 13983 2 nfnetlink_queue
> > nf_conntrack_ipv4 19084 3
> > nf_defrag_ipv4 12649 1 nf_conntrack_ipv4
> > ipt_REJECT 12512 1
> > xt_tcpudp 12531 2
> > iptable_filter 12706 1
> > ip_tables 18106 1 iptable_filter
> > xt_iprange 12485 0
> > bnep 17923 2
> > xt_state 12514 3
> > nf_conntrack 70103 2 nf_conntrack_
> > xt_mark 12499 6
> > xt_NFQUEUE 12630 3
> > x_tables 21975 8
> >
> ipt_REJECT,
> > rfcomm 38408 0
> > bluetooth 148839 10 bnep,rfcomm
> > pci_stub 12550 1
> > vboxpci 22882 0
> > vboxnetadp 13328 0
> > vboxnetflt 27211 0
> > vboxdrv 251814 3 vboxpci,
> > parport_pc 32114 0
> > ppdev 12849 0
> > snd_hda_
> > binfmt_misc 17292 1
> > snd_hda_intel 24262 2
> > snd_hda_codec 91859 2 snd_hda_
> > snd_hwdep 13276 1 snd_hda_codec
> > snd_pcm 80435 2 snd_hda_
> > snd_seq_midi 13132 0
> > snd_rawmidi 25241 1 snd_seq_midi
> > wl 2646601 0
> > snd_seq_midi_event 14475 1 snd_seq_midi
> > snd_seq 51567 2 snd_seq_
> > i915 509519 3
> > snd_timer 28932 2 snd_pcm,snd_seq
> > snd_seq_device 14172 3 snd_seq_
> > joydev 17393 0
> > drm_kms_helper 32889 1 i915
> > drm 192194 4 i915,drm_kms_helper
> > hp_wmi 13652 0
> > snd 55902 13
> >
> snd_hda_
> > lib80211 14570 1 wl
> > sparse_keymap 13658 1 hp_wmi
> > psmouse 73673 0
> > soundcore 12600 1 snd
> > i2c_algo_bit 13199 1 i915
> > serio_raw 12990 0
> > snd_page_alloc 14115 2 snd_hda_
> > video 18908 1 i915
> > wmi 18744 1 hp_wmi
> > lp 17455 0
> > parport 40930 3 parport_pc,ppdev,lp
> > ahci 21634 2
> > libahci 25727 1 ahci
> > 8139too 23283 0
> > 8139cp 22636 0
> > wes@Lappy3000:~$
> >
> >
> > On Thu, Feb 23, 2012 at 2:35 PM, Mark Rijckenberg <
> > <email address hidden>> wrote:
> >
> >> Your question #188527 on wicd in Ubuntu changed:
> >> https:/
> >>
> >> Status: Open => Needs information
> >>
> >> Mark Rijckenberg requested more information:
> >> You did not follow the instructions in step 2. Your command ends with
> >> lshw, but it should end with lsmod, as I explained before. Avoid using
> >> the Email client to copy-paste the command.
> >>
> >> I will repeat the instructions here:
> >>
> >> Step 2: Please copy-paste the following command from
> >> https:/
> >> Firefox into the Linux Terminal. Do NOT copy-paste from the Email
> >> message into the Terminal, as that will only copy PART of the command.
> >> The command STARTS with the word sudo and ENDS with the word lsmod. So
> >> please copy-paste the ENTIRE command below from Firefox into a Terminal,
> >> press <enter>, then enter password when sudo asks for password, then
> >> press enter again.
> >>
> >> --
> >> To answer this request for more information, you can either reply to
> >> this email or enter your reply at the following page:
> >> https:/
> >>
> >> You received this question notification because you asked the question.
> >>
> >
> >
> >
> > --
> > Wes
> >
> >
>
>
> --
> Wes
>
> You received this question notification because you asked the question.
>
--
Wes
Revision history for this message
|
#12 |
First issue is this Terminal output:
[ 26.840417] eth%d: 5.100.82.38 driver failed with code 21
This is linked to the following bugreport:
https:/
First copy-paste the following 3 commands into the Terminal.
sudo apt-get update
sudo apt-get remove bcmwl-kernel-source
sudo apt-get install firmware-
Then REBOOT your PC.
The following Terminal output (that you sent us) seems to indicate the second issue that your wireless card is having:
"
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
"
So your wireless card is probably disabled by a hardware switch, a
special key combination (Fn-F2, etc...), by incorrect BIOS settings for
wireless, or a COMBINATION of these factors...
There might also be a BIOS option that allows you to have the wireless
functionality controlled "By application"
Search for the "by application" option in the BIOS and select it (if
possible)....
Also run the following 2 Terminal commands to try to change the rfkill
state of your wireless chipset:
rfkill unblock all
sudo rfkill unblock all
Then retest wireless.
Revision history for this message
|
#13 |
I no longer use Linux, went back to Microsoft.
On Sun, Jun 9, 2013 at 3:13 PM, Adam Porter <
<email address hidden>> wrote:
> Bug #732677 status changed in CentOS:
>
> New => Invalid
>
> https:/
> "bcmwl 5.100.82.
>
> This bug is linked to #188527.
> No Wifi connection on Compaq Presario with Ubuntu
> https:/
>
> --
> You received this question notification because you asked the question.
>
--
Wes
Revision history for this message
|
#14 |
That's fine. Please mark as solved
Can you help with this problem?
Provide an answer of your own, or ask Wes McAtee for more information if necessary.