Qualcomm Atheros QCA9377 not connecting to eduroam WiFi network

Output says its disabled. Do you have a shortcut key or switch to turn WiFi off/on? If so... Press it

Hello,
It was off because i could not connect to the network through wifi, I assure you that I tried to switch it on and off multiple times.

Please re-run the command with the device enabled (even if not working).
Do I understand correctly - at home WLAN is working well, just for eduroam it is failing?

Hi,

Yes, you are correct.

It works with every other WLAN, I think it might have something to do with the authentication method.

However, the credentials are correct because I can connect with my android phone.

I re-ran the command and the output is as follows:

Hit:1 http://pt.archive.ubuntu.com/ubuntu bionic InRelease
Get:2 http://pt.archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]
Hit:3 http://archive.canonical.com/ubuntu bionic InRelease
Get:4 http://security.ubuntu.com/ubuntu bionic-security InRelease [88,7 kB]
Get:5 http://pt.archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]
Get:6 http://pt.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [601 kB]
Get:7 https://deb.opera.com/opera-stable stable InRelease [2591 B]
Get:8 https://deb.opera.com/opera-stable stable/non-free amd64 Packages [1814 B]
Get:9 http://security.ubuntu.com/ubuntu bionic-security/main i386 Packages [390 kB]
Get:10 http://pt.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [768 kB]
Get:11 http://security.ubuntu.com/ubuntu bionic-security/main amd64 Packages [545 kB]
Get:12 http://pt.archive.ubuntu.com/ubuntu bionic-updates/main Translation-en [275 kB]
Get:13 http://pt.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [295 kB]
Get:14 http://pt.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [73,8 kB]
Get:15 http://pt.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [143 kB]
Get:16 http://pt.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages [985 kB]
Get:17 http://security.ubuntu.com/ubuntu bionic-security/main Translation-en [182 kB]
Get:18 http://pt.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [1018 kB]
Get:19 http://security.ubuntu.com/ubuntu bionic-security/main amd64 DEP-11 Metadata [38,5 kB]
Get:20 http://security.ubuntu.com/ubuntu bionic-security/main DEP-11 48x48 Icons [17,6 kB]
Get:21 http://pt.archive.ubuntu.com/ubuntu bionic-updates/universe Translation-en [313 kB]
Get:22 http://security.ubuntu.com/ubuntu bionic-security/main DEP-11 64x64 Icons [41,5 kB]
Get:23 http://pt.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata [254 kB]
Get:24 http://pt.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons [193 kB]
Get:25 http://pt.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons [439 kB]
Get:26 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 Packages [617 kB]
Get:27 http://pt.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 DEP-11 Metadata [2464 B]
Get:28 http://pt.archive.ubuntu.com/ubuntu bionic-backports/universe i386 Packages [4028 B]
Get:29 http://pt.archive.ubuntu.com/ubuntu bionic-backports/universe amd64 Packages [4024 B]
Get:30 http://pt.archive.ubuntu.com/ubuntu bionic-backports/universe amd64 DEP-11 Metadata [7920 B]
Get:31 http://security.ubuntu.com/ubuntu bionic-security/universe i386 Packages [595 kB]
Get:32 http://security.ubuntu.com/ubuntu bionic-security/universe Translation-en [206 kB]
Get:33 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 DEP-11 Metadata [42,1 kB]
Get:34 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 48x48 Icons [16,4 kB]
Get:35 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 64x64 Icons [113 kB]
Get:36 http://security.ubuntu.com/ubuntu bionic-security/multiverse amd64 DEP-11 Metadata [2464 B]
Fetched 8437 kB in 1min 25s (98,8 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
usbutils is already the newest version (1:007-4build1).
hwinfo is already the newest version (21.52-1).
grep is already the newest version (3.1-2build1).
pciutils is already the newest version (1:3.5.2-1ubuntu1.1).
rfkill is already the newest version (2.31.1-0.4ubuntu3.4).
0 upgraded, 0 newly installed, 0 to remove and 14 not upgraded.
  *-network
       description: Wireless interface
       product: QCA9377 802.11ac Wireless Network Adapter
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlp2s0
       version: 31
       serial: 00:f4:8d:f3:31:4b
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath10k_pci driverversion=5.0.0-32-generic firmware=WLAN.TF.2.1-00021-QCARMSWP-1 latency=0 link=no multicast=yes wireless=IEEE 802.11
       resources: irq:128 memory:b2000000-b21fffff
  *-network
       description: Ethernet interface
       physical id: 3
       logical name: bnep0
       serial: 00:f4:8d:f3:31:4c
       capabilities: ethernet physical
       configuration: broadcast=yes ip=192.168.44.177 multicast=yes
0: ideapad_wlan: Wireless LAN
 Soft blocked: no
 Hard blocked: no
1: ideapad_bluetooth: Bluetooth
 Soft blocked: no
 Hard blocked: no
2: ideapad_3g: Wireless WAN
 Soft blocked: no
 Hard blocked: no
3: hci0: Bluetooth
 Soft blocked: no
 Hard blocked: no
4: phy0: Wireless LAN
 Soft blocked: no
 Hard blocked: no
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    ESSID:"Laranjo"
                    Channel:36
                    Frequency:5.18 GHz (Channel 36)
                    ESSID:"eduroam5G"
                    Channel:64
                    Frequency:5.32 GHz (Channel 64)
                    ESSID:"eduroam5G"
                    Channel:100
                    Frequency:5.5 GHz (Channel 100)
bnep0 Interface doesn't support scanning.

                    ESSID:"eduroam"
lo Interface doesn't support scanning.

                    Channel:100
                    Frequency:5.5 GHz (Channel 100)
                    ESSID:"eduroam5G"
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    ESSID:"eduroam"
                    Channel:64
                    Frequency:5.32 GHz (Channel 64)
                    ESSID:"eduroam"
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    ESSID:"eduroam"
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    ESSID:"eduroam"
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.3 LTS"
02:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
 Subsystem: Lenovo QCA9377 802.11ac Wireless Network Adapter [17aa:0901]
 Kernel driver in use: ath10k_pci
 Kernel modules: ath10k_pci, wl
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b61e Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 0cf3:e500 Qualcomm Atheros Communications
Bus 001 Device 004: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN
connected full enabled enabled enabled enabled
H/W path Device Class Description
====================================================
                          system 81F5 (LENOVO_MT_81F5_BU_idea_FM_ideapad
/0 bus LNVNB161216
/0/0 memory 128KiB BIOS
/0/4 processor Intel(R) Core(TM) i5-8250U CPU @ 1.60GH
/0/4/5 memory 256KiB L1 cache
/0/4/6 memory 1MiB L2 cache
/0/4/7 memory 6MiB L3 cache
/0/25 memory 8GiB System Memory
/0/25/0 memory 4GiB SODIMM DDR4 Synchronous Unbuffered
/0/25/1 memory 4GiB SODIMM DDR4 Synchronous Unbuffered
/0/100 bridge Xeon E3-1200 v6/7th Gen Core Processor
/0/100/2 display UHD Graphics 620
/0/100/4 generic Xeon E3-1200 v5/E3-1500 v5/6th Gen Core
/0/100/14 bus Sunrise Point-LP USB 3.0 xHCI Controlle
/0/100/14/0 usb1 bus xHCI Host Controller
/0/100/14/0/1 input Microsoft 3-Button Mouse with IntelliEy
/0/100/14/0/4 communication Bluetooth wireless interface
/0/100/14/0/7 multimedia Integrated Camera
/0/100/14/1 usb2 bus xHCI Host Controller
/0/100/14.2 generic Sunrise Point-LP Thermal subsystem
/0/100/15 generic Sunrise Point-LP Serial IO I2C Controll
/0/100/16 communication Sunrise Point-LP CSME HECI #1
/0/100/17 storage Sunrise Point-LP SATA Controller [AHCI
/0/100/1c bridge Sunrise Point-LP PCI Express Root Port
/0/100/1c/0 display Topaz XT [Radeon R7 M260/M265 / M340/M3
/0/100/1c.5 bridge Sunrise Point-LP PCI Express Root Port
/0/100/1c.5/0 wlp2s0 network QCA9377 802.11ac Wireless Network Adapt
/0/100/1f bridge Sunrise Point LPC Controller/eSPI Contr
/0/100/1f.2 memory Memory controller
/0/100/1f.3 multimedia Sunrise Point-LP HD Audio
/0/100/1f.4 bus Sunrise Point-LP SMBus
/0/1 scsi0 storage
/0/1/0.0.0 /dev/sda disk 256GB SAMSUNG MZ7LN256
/0/1/0.0.0/1 volume 511MiB Windows FAT volume
/0/1/0.0.0/2 /dev/sda2 volume 237GiB EXT4 volume
/1 power CRB Battery 0
/2 power OEM Define 5
/3 bnep0 network Ethernet interface
Linux marmeirais-Lenovo-ideapad-330S-15IKB 5.0.0-32-generic #34~18.04.2-Ubuntu SMP Thu Oct 10 10:36:02 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.020673] No NUMA configuration found
[ 0.166947] APIC: Switch to symmetric I/O mode setup
[ 0.168632] Switched APIC routing to cluster x2apic.
[ 0.204590] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.204591] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.298962] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.585916] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[ 0.585957] pci 0000:02:00.0: reg 0x10: [mem 0xb2000000-0xb21fffff 64bit]
[ 0.586117] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.620526] usbcore: registered new interface driver usbfs
[ 0.620526] usbcore: registered new interface driver hub
[ 0.620526] usbcore: registered new device driver usb
[ 0.706964] clocksource: Switched to clocksource tsc-early
[ 0.760796] pnp: PnP ACPI: found 8 devices
[ 1.655313] clocksource: Switched to clocksource tsc
[ 1.717601] Console: switching to colour frame buffer device 170x48
[ 1.718499] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:00/PNP0C0D:00/input/input0
[ 1.718514] ACPI: Lid Switch [LID0]
[ 1.731683] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.731721] No Arguments are initialized for method [FNCL]
[ 1.731723] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.731732] ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.743638] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.743677] No Arguments are initialized for method [FNCL]
[ 1.743679] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.743688] ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.755654] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.755693] No Arguments are initialized for method [FNCL]
[ 1.755695] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.755703] ACPI Error: Method parse/execution failed \_TZ.FN01._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.767655] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.767693] No Arguments are initialized for method [FNCL]
[ 1.767695] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.767704] ACPI Error: Method parse/execution failed \_TZ.FN01._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.779640] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.779679] No Arguments are initialized for method [FNCL]
[ 1.779681] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.779689] ACPI Error: Method parse/execution failed \_TZ.FN02._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.791665] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.791704] No Arguments are initialized for method [FNCL]
[ 1.791706] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.791714] ACPI Error: Method parse/execution failed \_TZ.FN02._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.803697] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.803735] No Arguments are initialized for method [FNCL]
[ 1.803737] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.803746] ACPI Error: Method parse/execution failed \_TZ.FN03._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.815711] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.815749] No Arguments are initialized for method [FNCL]
[ 1.815752] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.815760] ACPI Error: Method parse/execution failed \_TZ.FN03._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.827714] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.827752] No Arguments are initialized for method [FNCL]
[ 1.827754] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.827763] ACPI Error: Method parse/execution failed \_TZ.FN04._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.839679] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.LPCB.HEC.ECMD], AE_NOT_FOUND (20181213/psargs-330)
               Initialized Local Variables for Method [FNCL]:
[ 1.839717] No Arguments are initialized for method [FNCL]
[ 1.839719] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)
[ 1.839728] ACPI Error: Method parse/execution failed \_TZ.FN04._ON, AE_NOT_FOUND (20181213/psparse-531)
[ 1.871211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.871213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.871215] usb usb1: Product: xHCI Host Controller
[ 1.871216] usb usb1: Manufacturer: Linux 5.0.0-32-generic xhci-hcd
[ 1.871217] usb usb1: SerialNumber: 0000:00:14.0
[ 1.871393] hub 1-0:1.0: USB hub found
[ 1.873602] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[ 1.873603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.873605] usb usb2: Product: xHCI Host Controller
[ 1.873606] usb usb2: Manufacturer: Linux 5.0.0-32-generic xhci-hcd
[ 1.873608] usb usb2: SerialNumber: 0000:00:14.0
[ 1.873766] hub 2-0:1.0: USB hub found
[ 1.874635] usb: port power management may be unreliable
[ 1.933015] RAS: Correctable Errors collector initialized.
[ 1.972703] No architecture policies found
[ 2.027103] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.033644] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.211042] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 2.360797] usb 1-4: New USB device found, idVendor=0cf3, idProduct=e500, bcdDevice= 0.01
[ 2.360807] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.487531] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 2.671164] usb 1-7: New USB device found, idVendor=04f2, idProduct=b61e, bcdDevice= 4.25
[ 2.671165] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.671166] usb 1-7: Product: Integrated Camera
[ 2.671167] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.671167] usb 1-7: SerialNumber: 0001
[ 2.979246] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.982087] lp: driver loaded but no devices found
[ 3.232826] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 3.235119] usbcore: registered new interface driver btusb
[ 3.275275] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.282301] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.288240] i2c_hid i2c-ALPS07AP:00: i2c-ALPS07AP:00 supply vdd not found, using dummy regulator
[ 3.288258] i2c_hid i2c-ALPS07AP:00: i2c-ALPS07AP:00 supply vddl not found, using dummy regulator
[ 3.294612] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b61e)
[ 3.298190] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input4
[ 3.298235] usbcore: registered new interface driver uvcvideo
[ 3.320198] fb0: switching to inteldrmfb from EFI VGA
[ 3.320226] Console: switching to colour dummy device 80x25
[ 3.326805] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 3.331768] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 3.331955] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 3.331960] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3.331963] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 3.367363] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 3.367370] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3.367374] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 3.373442] Console: switching to colour frame buffer device 170x48
[ 3.374974] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 3.375262] CRAT table not found
[ 3.375610] vga_switcheroo: enabled
[ 3.465205] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 3.465213] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3.465216] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 3.499290] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 3.499298] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3.499301] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 3.499338] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 3.499343] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3.499344] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 3.532260] wl: loading out-of-tree module taints kernel.
[ 3.532262] wl: module license 'MIXED/Proprietary' taints kernel.
[ 3.563431] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 3.612660] intel_rapl: Found RAPL domain package
[ 3.612661] intel_rapl: Found RAPL domain core
[ 3.612662] intel_rapl: Found RAPL domain uncore
[ 3.619167] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[ 3.619168] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 3.619588] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[ 3.683677] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 3.757865] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[ 3.776301] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 3.863945] ath: EEPROM regdomain: 0x6c
[ 3.863946] ath: EEPROM indicates we should expect a direct regpair map
[ 3.863947] ath: Country alpha2 being used: 00
[ 3.863948] ath: Regpair used: 0x6c
[ 3.875396] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.514207] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.589392] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 4.589443] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 4.589482] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 4.589527] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 4.589571] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 4.589616] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 4.589661] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.691091] audit: type=1400 audit(1572551402.216:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=783 comm="apparmor_parser"
[ 4.946158] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 4.946164] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4.946166] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 4.980780] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 4.980786] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4.980788] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 4.980818] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.169915] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[ 21.487471] usb 1-1: new low-speed USB device number 4 using xhci_hcd
[ 21.641229] usb 1-1: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
[ 21.641237] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 21.641242] usb 1-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 21.641246] usb 1-1: Manufacturer: Microsoft
[ 21.665207] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:0040.0002/input/input19
[ 21.665400] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-1/input0
[ 21.665465] usbcore: registered new interface driver usbhid
[ 21.665465] usbhid: USB HID core driver
[ 48.181757] wlp2s0: authenticate with cc:d5:39:e3:c3:7f
[ 48.216920] wlp2s0: send auth to cc:d5:39:e3:c3:7f (try 1/3)
[ 48.217684] wlp2s0: authenticated
[ 48.219032] wlp2s0: associate with cc:d5:39:e3:c3:7f (try 1/3)
[ 48.220708] wlp2s0: RX AssocResp from cc:d5:39:e3:c3:7f (capab=0x1111 status=0 aid=181)
[ 48.224051] wlp2s0: associated
[ 48.224327] ath: EEPROM regdomain: 0x826c
[ 48.224328] ath: EEPROM indicates we should expect a country code
[ 48.224329] ath: doing EEPROM country->regdmn map search
[ 48.224331] ath: country maps to regdmn code: 0x37
[ 48.224331] ath: Country alpha2 being used: PT
[ 48.224332] ath: Regpair used: 0x37
[ 48.224333] ath: regdomain 0x826c dynamically updated by country element
[ 48.297845] wlp2s0: Limiting TX power to 17 dBm as advertised by cc:d5:39:e3:c3:7f
[ 69.000254] wlp2s0: deauthenticating from cc:d5:39:e3:c3:7f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 77.290523] wlp2s0: authenticate with cc:d5:39:e3:c3:7f
[ 77.324982] wlp2s0: send auth to cc:d5:39:e3:c3:7f (try 1/3)
[ 77.325856] wlp2s0: authenticated
[ 77.326944] wlp2s0: associate with cc:d5:39:e3:c3:7f (try 1/3)
[ 77.328444] wlp2s0: RX AssocResp from cc:d5:39:e3:c3:7f (capab=0x1111 status=0 aid=181)
[ 77.330630] wlp2s0: associated
[ 77.330695] ath: EEPROM regdomain: 0x826c
[ 77.330695] ath: EEPROM indicates we should expect a country code
[ 77.330696] ath: doing EEPROM country->regdmn map search
[ 77.330697] ath: country maps to regdmn code: 0x37
[ 77.330697] ath: Country alpha2 being used: PT
[ 77.330698] ath: Regpair used: 0x37
[ 77.330699] ath: regdomain 0x826c dynamically updated by country element
[ 77.334565] wlp2s0: Limiting TX power to 17 dBm as advertised by cc:d5:39:e3:c3:7f
[ 98.005587] wlp2s0: deauthenticating from cc:d5:39:e3:c3:7f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 105.433309] wlp2s0: authenticate with cc:d5:39:e3:c3:7f
[ 105.467841] wlp2s0: send auth to cc:d5:39:e3:c3:7f (try 1/3)
[ 105.468776] wlp2s0: authenticated
[ 105.471023] wlp2s0: associate with cc:d5:39:e3:c3:7f (try 1/3)
[ 105.472661] wlp2s0: RX AssocResp from cc:d5:39:e3:c3:7f (capab=0x1111 status=0 aid=181)
[ 105.475477] wlp2s0: associated
[ 105.475601] ath: EEPROM regdomain: 0x826c
[ 105.475602] ath: EEPROM indicates we should expect a country code
[ 105.475603] ath: doing EEPROM country->regdmn map search
[ 105.475603] ath: country maps to regdmn code: 0x37
[ 105.475604] ath: Country alpha2 being used: PT
[ 105.475604] ath: Regpair used: 0x37
[ 105.475605] ath: regdomain 0x826c dynamically updated by country element
[ 105.536739] wlp2s0: Limiting TX power to 17 dBm as advertised by cc:d5:39:e3:c3:7f
[ 126.003090] wlp2s0: deauthenticating from cc:d5:39:e3:c3:7f by local choice (Reason: 3=DEAUTH_LEAVING)
 Release Date: 08/21/2018
 Manufacturer: LENOVO
 Product Name: 81F5
 Serial Number: YD063HQH
 Manufacturer: LENOVO
 Product Name: LNVNB161216
 Serial Number: YD063HQH
 Manufacturer: LENOVO
 Serial Number: YD063HQH
 Manufacturer: Intel(R) Corporation
 Serial Number: To Be Filled By O.E.M.
 Port Type: Serial Port 16550A Compatible
 Manufacturer: Samsung
 Serial Number: 00000000
 Manufacturer: Samsung
 Serial Number: 95796963
 Manufacturer: -Virtual Battery 0-
 Manufacture Date: 08/08/2010
 Serial Number: Battery 0
 Manufacturer: OEM Define 2
 Serial Number: OEM Define 3
  Debug Use USB(Disabled:Serial)
wlp2s0 IEEE 802.11 ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=17 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Power Management:on

bnep0 no wireless extensions.

lo no wireless extensions.

/etc/modprobe.d/alsa-base.conf:install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
/etc/modprobe.d/ath10k_core.conf:options ath10k_core skip_otp=y
/etc/modprobe.d/blacklist-ath_pci.conf:# which ath5k cannot recover. To prevent this condition, stop
/etc/modprobe.d/blacklist-ath_pci.conf:blacklist ath_pci
/etc/modprobe.d/blacklist-bcm43.conf:# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43legacy
/etc/modprobe.d/blacklist-bcm43.conf:blacklist bcm43xx
/etc/modprobe.d/blacklist-bcm43.conf:blacklist brcm80211
/etc/modprobe.d/blacklist-bcm43.conf:blacklist brcmfmac
/etc/modprobe.d/blacklist-bcm43.conf:blacklist brcmsmac
/etc/modprobe.d/blacklist-bcm43.conf:blacklist bcma
/etc/modprobe.d/blacklist.conf:blacklist eth1394
/etc/modprobe.d/blacklist.conf:# replaced by p54pci
/etc/modprobe.d/blacklist.conf:blacklist prism54
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist.conf:blacklist bcm43xx
/etc/modprobe.d/blacklist-oss.conf:blacklist uart6850
/etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
/etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system. When removing iwlwifi, first
/etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi.
/etc/modprobe.d/iwlwifi.conf:remove iwlwifi \
/etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
/etc/modprobe.d/iwlwifi.conf:&& /sbin/modprobe -r mac80211
/etc/modprobe.d/QCA9377.conf:options QCA9377 fwlps=N
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
11: PCI 200.0: 0282 WLAN controller
  [Created at pci.378]
  Unique ID: qru8.uBUKI35slGC
  Parent ID: HnsE.PS2ePd53EO2
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter"
  Vendor: pci 0x168c "Qualcomm Atheros"
  Device: pci 0x0042 "QCA9377 802.11ac Wireless Network Adapter"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x0901
  Revision: 0x31
  Driver: "ath10k_pci"
  Driver Modules: "ath10k_pci"
  Device File: wlp2s0
  Features: WLAN
  Memory Range: 0xb2000000-0xb21fffff (rw,non-prefetchable)
  IRQ: 128 (2688 events)
  HW Address: 00:f4:8d:f3:31:4b
  Permanent HW Address: 00:f4:8d:f3:31:4b
  Link detected: no
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v0000168Cd00000042sv000017AAsd00000901bc02sc80i00"
  Driver Info #0:
    Driver Status: ath10k_pci is active
    Driver Activation Cmd: "modprobe ath10k_pci"
  Driver Info #1:
    Driver Status: wl is active
    Driver Activation Cmd: "modprobe wl"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)
root 860 0.0 0.2 177640 17292 ? Ssl 19:50 0:00 /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
root 885 0.0 0.1 45608 8680 ? Ss 19:50 0:00 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
root 886 0.2 0.2 580760 19148 ? Ssl 19:50 0:00 /usr/sbin/NetworkManager --no-daemon
root 2283 0.0 0.0 25988 6332 ? S 19:52 0:00 /sbin/dhclient -d -q -sf /usr/lib/NetworkManager/nm-dhcp-helper -pf /run/dhclient-bnep0.pid -lf /var/lib/NetworkManager/dhclient-c7869a4a-f6d6-4cf0-9d50-501ac81d0ba1-bnep0.lease -cf /var/lib/NetworkManager/dhclient-bnep0.conf bnep0
marmeir+ 3858 0.0 0.0 21532 1000 pts/0 S+ 19:56 0:00 grep --color=auto -E wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.44.1 0.0.0.0 UG 0 0 0 bnep0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 bnep0
192.168.44.0 0.0.0.0 255.255.255.0 U 0 0 0 bnep0
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "systemd-resolve --status" to see details about the uplink DNS servers
# currently in use.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.

nameserver 127.0.0.53
options edns0
total 105180
262145 drwxr-xr-x 4 root root 4096 out 26 16:31 .
     2 drwxr-xr-x 24 root root 4096 out 25 21:25 ..
262157 -rw-r--r-- 1 root root 224447 set 30 23:23 config-5.0.0-31-generic
262164 -rw-r--r-- 1 root root 224447 out 10 11:02 config-5.0.0-32-generic
     1 drwx------ 3 root root 4096 jan 1 1970 efi
262147 drwxr-xr-x 5 root root 4096 out 25 21:25 grub
262163 -rw-r--r-- 1 root root 40269423 out 19 16:46 initrd.img-5.0.0-31-generic
262148 -rw-r--r-- 1 root root 40268102 out 26 16:31 initrd.img-5.0.0-32-generic
262150 -rw-r--r-- 1 root root 182704 jan 28 2016 memtest86+.bin
262151 -rw-r--r-- 1 root root 184380 jan 28 2016 memtest86+.elf
262152 -rw-r--r-- 1 root root 184840 jan 28 2016 memtest86+_multiboot.bin
262156 -rw------- 1 root root 4294610 set 30 23:23 System.map-5.0.0-31-generic
262159 -rw------- 1 root root 4295198 out 10 11:02 System.map-5.0.0-32-generic
262158 -rw------- 1 root root 8769272 out 1 03:27 vmlinuz-5.0.0-31-generic
262165 -rw------- 1 root root 8769272 out 10 11:04 vmlinuz-5.0.0-32-generic
Support status summary of 'marmeirais-Lenovo-ideapad-330S-15IKB':

You have 1804 packages (83.8%) supported until abril 2023 (Canonical - 5y)
You have 125 packages (5.8%) supported until abril 2021 (Community - 3y)
You have 3 packages (0.1%) supported until abril 2021 (Canonical - 3y)

You have 0 packages (0.0%) that can not/no-longer be downloaded
You have 221 packages (10.3%) that are unsupported

Your Hardware Enablement Stack (HWE) is supported until abril 2023.

Run with --show-unsupported, --show-supported or --show-all to see more details
Downloaded daily snapshot dated 2019-10-30 18:30:25
--2019-10-31 19:56:29-- http://www.linux-usb.org/usb.ids
Resolving www.linux-usb.org (www.linux-usb.org)... 216.105.38.10
Connecting to www.linux-usb.org (www.linux-usb.org)|216.105.38.10|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 614186 (600K) [text/plain]
Saving to: ‘/var/lib/usbutils/usb.ids.new’

/var/lib/usbutils/u 100%[===================>] 599,79K 106KB/s in 6,5s

2019-10-31 19:56:37 (92,4 KB/s) - ‘/var/lib/usbutils/usb.ids.new’ saved [614186/614186]

Done.
Module Size Used by
cmac 16384 1
usbhid 53248 0
rfcomm 77824 4
bnep 24576 3
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 114688 1
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
ledtrig_audio 16384 2 snd_hda_codec_generic,snd_hda_codec_realtek
arc4 16384 2
joydev 28672 0
intel_rapl 24576 0
snd_soc_skl 106496 0
snd_soc_hdac_hda 24576 1 snd_soc_skl
snd_hda_ext_core 28672 2 snd_soc_hdac_hda,snd_soc_skl
snd_soc_skl_ipc 65536 1 snd_soc_skl
x86_pkg_temp_thermal 20480 0
snd_soc_sst_ipc 20480 1 snd_soc_skl_ipc
intel_powerclamp 20480 0
snd_soc_sst_dsp 36864 1 snd_soc_skl_ipc
coretemp 20480 0
snd_soc_acpi_intel_match 28672 1 snd_soc_skl
wl 6447104 0
snd_soc_acpi 16384 2 snd_soc_acpi_intel_match,snd_soc_skl
snd_soc_core 233472 2 snd_soc_hdac_hda,snd_soc_skl
snd_compress 24576 1 snd_soc_core
ac97_bus 16384 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
nls_iso8859_1 16384 1
snd_hda_intel 49152 6
hid_multitouch 28672 0
hid_generic 16384 0
snd_hda_codec 135168 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek,snd_soc_hdac_hda
snd_hda_core 86016 8 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_soc_hdac_hda,snd_soc_skl
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 102400 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_core,snd_soc_skl,snd_hda_core,snd_pcm_dmaengine
crct10dif_pclmul 16384 1
crc32_pclmul 16384 0
snd_seq_midi 20480 0
snd_seq_midi_event 16384 1 snd_seq_midi
ghash_clmulni_intel 16384 0
ath10k_pci 40960 0
amdgpu 3522560 1
snd_rawmidi 36864 1 snd_seq_midi
ath10k_core 438272 1 ath10k_pci
i915 1818624 24
ath 32768 1 ath10k_core
mac80211 819200 1 ath10k_core
snd_seq 69632 2 snd_seq_midi,snd_seq_midi_event
uvcvideo 94208 0
aesni_intel 372736 2
videobuf2_vmalloc 20480 1 uvcvideo
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer 36864 2 snd_seq,snd_pcm
kvmgt 28672 0
aes_x86_64 20480 1 aesni_intel
videobuf2_memops 20480 1 videobuf2_vmalloc
crypto_simd 16384 1 aesni_intel
videobuf2_v4l2 24576 1 uvcvideo
vfio_mdev 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper 16384 1 aesni_intel
mdev 24576 2 kvmgt,vfio_mdev
videobuf2_common 45056 2 videobuf2_v4l2,uvcvideo
input_leds 16384 0
vfio_iommu_type1 28672 0
intel_cstate 20480 0
intel_rapl_perf 16384 0
vfio 32768 3 kvmgt,vfio_mdev,vfio_iommu_type1
snd 86016 25 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
chash 16384 1 amdgpu
serio_raw 20480 0
videodev 204800 3 videobuf2_v4l2,uvcvideo,videobuf2_common
wmi_bmof 16384 0
intel_wmi_thunderbolt 20480 0
amd_iommu_v2 20480 1 amdgpu
kvm 630784 1 kvmgt
cfg80211 679936 4 wl,ath,mac80211,ath10k_core
media 53248 4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
gpu_sched 32768 1 amdgpu
soundcore 16384 1 snd
ttm 102400 1 amdgpu
irqbypass 16384 1 kvm
btusb 49152 0
drm_kms_helper 180224 2 amdgpu,i915
btrtl 20480 1 btusb
idma64 20480 0
btbcm 16384 1 btusb
btintel 24576 1 btusb
virt_dma 20480 1 idma64
mei_me 40960 0
bluetooth 557056 35 btrtl,btintel,btbcm,bnep,btusb,rfcomm
drm 483328 20 gpu_sched,drm_kms_helper,amdgpu,i915,ttm
mei 106496 1 mei_me
i2c_algo_bit 16384 2 amdgpu,i915
fb_sys_fops 16384 1 drm_kms_helper
processor_thermal_device 20480 0
ecdh_generic 28672 2 bluetooth
syscopyarea 16384 1 drm_kms_helper
int340x_thermal_zone 16384 1 processor_thermal_device
intel_xhci_usb_role_switch 16384 0
sysfillrect 16384 1 drm_kms_helper
intel_lpss_pci 20480 0
roles 16384 1 intel_xhci_usb_role_switch
intel_pch_thermal 16384 0
intel_soc_dts_iosf 20480 1 processor_thermal_device
intel_lpss 16384 1 intel_lpss_pci
sysimgblt 16384 1 drm_kms_helper
ideapad_laptop 20480 0
sparse_keymap 16384 1 ideapad_laptop
int3400_thermal 20480 0
acpi_thermal_rel 16384 1 int3400_thermal
acpi_pad 184320 0
mac_hid 16384 0
sch_fq_codel 20480 2
parport_pc 36864 0
ppdev 24576 0
lp 20480 0
parport 53248 3 parport_pc,lp,ppdev
ip_tables 32768 0
x_tables 40960 1 ip_tables
autofs4 45056 2
ahci 40960 2
libahci 32768 1 ahci
wmi 28672 3 intel_wmi_thunderbolt,wmi_bmof,ideapad_laptop
i2c_hid 28672 0
hid 126976 4 i2c_hid,usbhid,hid_multitouch,hid_generic
video 49152 2 ideapad_laptop,i915

Thanks

Comw configurare la chiavetta vodafone mobile broadband k5160 in banda larga mobile su ubuntu 18.04

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Hello.

I still need your help, the computer doesn't connect.

Thanks

A sábado, 16 de nov de 2019, 09:29, Launchpad Janitor <
<email address hidden>> escreveu:

> Your question #685460 on gnome-nettool in Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+source/gnome-nettool/+question/685460
>
> Status: Open => Expired
>
> Launchpad Janitor expired the question:
> This question was expired because it remained in the 'Open' state
> without activity for the last 15 days.
>
> --
> If you're still having this problem, you can reopen your question either
> by replying to this email or by going to the following page and
> entering more information about your problem:
> https://answers.launchpad.net/ubuntu/+source/gnome-nettool/+question/685460
>
> You received this question notification because you asked the question.
>

This question was expired because it remained in the 'Open' state without activity for the last 15 days.