my internet (wifi) connection keeps disconnecting. It work ok with fedora.
Just installed ubuntu 10.04 and my wifi keeps getting disconnected. It always worked with fedora 12.
The connection stops during file downloads etc
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
downloads or updates or firefox it makes no diffence
|
Revision history for this message
|
#2 |
When it dosconnects run:
dmesg | tail
What is output.
The fact it works in fedora is interesting s both are the same OS, Linux. Hopefully the dmesg output will be helpful
|
Revision history for this message
|
#3 |
Hi, It disconnected again and then I did:
dmesg | tail
[ 384.904011] wlan0: direct probe to AP 00:15:63:80:66:10 (try 3)
[ 385.104510] wlan0: direct probe to AP 00:15:63:80:66:10 timed out
[ 390.478827] wlan0: direct probe to AP 00:15:63:80:66:10 (try 1)
[ 390.676081] wlan0: direct probe to AP 00:15:63:80:66:10 (try 2)
[ 390.876016] wlan0: direct probe to AP 00:15:63:80:66:10 (try 3)
[ 391.076511] wlan0: direct probe to AP 00:15:63:80:66:10 timed out
[ 396.454607] wlan0: direct probe to AP 00:15:63:80:66:10 (try 1)
[ 396.652011] wlan0: direct probe to AP 00:15:63:80:66:10 (try 2)
[ 396.852012] wlan0: direct probe to AP 00:15:63:80:66:10 (try 3)
[ 397.052021] wlan0: direct probe to AP 00:15:63:80:66:10 timed out
An another strange thing is that today(the second day i'm running ubuntu) I don't see the wifi icon on the top panel, instead I see 2 volume icons. Only one of these seems to work, the other does nothing!
Thanks
David
--- On Thu, 17/6/10, actionparsnip <email address hidden> wrote:
From: actionparsnip <email address hidden>
Subject: Re: [Question #114919]: my internet (wifi) connection keeps disconnecting. It work ok with fedora.
To: <email address hidden>
Date: Thursday, 17 June, 2010, 18:54
Your question #114919 on firefox in ubuntu changed:
https:/
Status: Open => Needs information
actionparsnip requested for more information:
When it dosconnects run:
dmesg | tail
What is output.
The fact it works in fedora is interesting s both are the same OS,
Linux. Hopefully the dmesg output will be helpful
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
You received this question notification because you are a direct
subscriber of the question.
|
Revision history for this message
|
#4 |
Sounds like a bug to me. Can you reboot and give the output of
dmesg > ~/dmesg.txt; gedit ~/dmesg.txt; rm ~/dmesg.txt
Thanks
|
Revision history for this message
|
#5 |
hi, here is the file
thanks
--- On Fri, 18/6/10, actionparsnip <email address hidden> wrote:
From: actionparsnip <email address hidden>
Subject: Re: [Question #114919]: my internet (wifi) connection keeps disconnecting. It work ok with fedora.
To: <email address hidden>
Date: Friday, 18 June, 2010, 12:11
Your question #114919 on gnome-nettool in ubuntu changed:
https:/
Status: Open => Needs information
actionparsnip requested for more information:
Sounds like a bug to me. Can you reboot and give the output of
dmesg > ~/dmesg.txt; gedit ~/dmesg.txt; rm ~/dmesg.txt
Thanks
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
You received this question notification because you are a direct
subscriber of the question.
|
Revision history for this message
|
#6 |
Please rerun the command and paste the text here, It's ok to post reams of text as an update.
Thanks
|
Revision history for this message
|
#7 |
here is the file again
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd87e000 (usable)
[ 0.000000] BIOS-e820: 00000000bd87e000 - 00000000bd901000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd901000 - 00000000bda43000 (reserved)
[ 0.000000] BIOS-e820: 00000000bda43000 - 00000000bda57000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bda57000 - 00000000bdb55000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb55000 - 00000000bdb5e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdb5e000 - 00000000bdb68000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb68000 - 00000000bdb89000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb89000 - 00000000bdb8f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb8f000 - 00000000bdd00000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbdd00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BDD00000 mask FFFF00000 write-through
[ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 5 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009ec00 (usable)
[ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bd87e000 (usable)
[ 0.000000] modified: 00000000bd87e000 - 00000000bd901000 (ACPI NVS)
[ 0.000000] modified: 00000000bd901000 - 00000000bda43000 (reserved)
[ 0.000000] modified: 00000000bda43000 - 00000000bda57000 (ACPI NVS)
[ 0.000000] modified: 00000000bda57000 - 00000000bdb55000 (reserved)
[ 0.000000] modified: 00000000bdb55000 - 00000000bdb5e000 (ACPI data)
[ 0.000000] modified: 00000000bdb5e000 - 00000000bdb68000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb68000 - 00000000bdb89000 (reserved)
[ 0.000000] modified: 00000000bdb89000 - 00000000bdb8f000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb8f000 - 00000000bdd00000 (usable)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37857000 - 37fefdfc
[ 0.000000] Allocated new RAMDISK: 008de000 - 01076dfc
[ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fefdfb to 008de000 - 01076dfb
[ 0.000000] ACPI: RSDP 000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT bdb5ce18 00044 (v01 INTEL DG41MJ 00000006 MSFT 00010013)
[ 0.000000] ACPI: FACP bdb5bd98 000F4 (v04 INTEL DG41RQ 00000006 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BDB5FF40/
[ 0.000000] ACPI: DSDT bdb55018 05983 (v01 INTEL DG41MJ 00000006 INTL 20051117)
[ 0.000000] ACPI: FACS bdb5ff40 00040
[ 0.000000] ACPI: APIC bdb5bf18 0006C (v02 INTEL DG41MJ 00000006 MSFT 00010013)
[ 0.000000] ACPI: MCFG bdb66e18 0003C (v01 INTEL DG41MJ 00000006 MSFT 00000097)
[ 0.000000] ACPI: HPET bdb66d98 00038 (v01 INTEL DG41MJ 00000006 AMI. 00000003)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2149MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd19c] BRK ==> [00008da000 - 00008dd19c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008de000 - 0001076dfc] NEW RAMDISK ==> [00008de000 - 0001076dfc]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00fd650] fd650
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bdd00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd87e
[ 0.000000] 0: 0x000bdb8f -> 0x000bdd00
[ 0.000000] On node 0 totalpages: 776585
[ 0.000000] free_area_
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4299 pages used for memmap
[ 0.000000] HighMem zone: 545062 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at bdd00000 (gap: bdd00000:40f00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770510
[ 0.000000] Kernel command line: BOOT_IMAGE=
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 15549440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bdd00)
[ 0.000000] Memory: 3048696k/3109888k available (4673k kernel code, 56464k reserved, 2121k data, 656k init, 2197444k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3166.558 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6333.11 BogoMIPS (lpj=12666232)
[ 0.004015] Security Framework initialized
[ 0.004030] AppArmor: AppArmor initialized
[ 0.004035] Mount-cache hash table entries: 512
[ 0.004121] Initializing cgroup subsys ns
[ 0.004124] Initializing cgroup subsys cpuacct
[ 0.004126] Initializing cgroup subsys memory
[ 0.004131] Initializing cgroup subsys devices
[ 0.004132] Initializing cgroup subsys freezer
[ 0.004134] Initializing cgroup subsys net_cls
[ 0.004148] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004149] CPU: L2 cache: 6144K
[ 0.004151] CPU: Physical Processor ID: 0
[ 0.004152] CPU: Processor Core ID: 0
[ 0.004155] mce: CPU supports 6 MCE banks
[ 0.004161] CPU0: Thermal monitoring enabled (TM2)
[ 0.004163] using mwait in idle threads.
[ 0.004167] Performance Events: Core2 events, Intel PMU driver.
[ 0.004173] ... version: 2
[ 0.004174] ... bit width: 40
[ 0.004175] ... generic registers: 2
[ 0.004177] ... value mask: 000000ffffffffff
[ 0.004178] ... max period: 000000007fffffff
[ 0.004179] ... fixed-purpose events: 3
[ 0.004180] ... event mask: 0000000700000003
[ 0.004184] Checking 'hlt' instruction... OK.
[ 0.021982] ACPI: Core revision 20090903
[ 0.028142] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028145] ftrace: allocating 21771 entries in 43 pages
[ 0.032035] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032280] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.074459] CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.160027] CPU1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
[ 0.160034] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164014] Brought up 2 CPUs
[ 0.164016] Total of 2 processors activated (12666.31 BogoMIPS).
[ 0.164730] CPU0 attaching sched-domain:
[ 0.164733] domain 0: span 0-1 level MC
[ 0.164734] groups: 0 1
[ 0.164739] CPU1 attaching sched-domain:
[ 0.164740] domain 0: span 0-1 level MC
[ 0.164742] groups: 1 0
[ 0.164814] devtmpfs: initialized
[ 0.164814] regulator: core version 0.5
[ 0.164814] Time: 13:34:46 Date: 06/18/10
[ 0.164814] NET: Registered protocol family 16
[ 0.164814] Trying to unpack rootfs image as initramfs...
[ 0.164814] EISA bus registered
[ 0.164814] ACPI: bus type pci registered
[ 0.164814] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164814] PCI: Not using MMCONFIG.
[ 0.184350] PCI: Using configuration type 1 for base access
[ 0.196123] bio: create slab <bio-0> at 0
[ 0.196596] ACPI: EC: Look up EC in DSDT
[ 0.198240] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.200255] ACPI: BIOS _OSI(Linux) query ignored
[ 0.201415] ACPI: Interpreter enabled
[ 0.201421] ACPI: (supports S0 S3 S4 S5)
[ 0.201434] ACPI: Using IOAPIC for interrupt routing
[ 0.201470] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.201520] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.201521] PCI: Using MMCONFIG for extended config space
[ 0.205952] ACPI: No dock devices found.
[ 0.206113] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.206185] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.206188] pci 0000:00:01.0: PME# disabled
[ 0.206207] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-
[ 0.206212] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-
[ 0.206215] pci 0000:00:02.0: reg 20 io port: [0xf140-0xf147]
[ 0.206241] pci 0000:00:02.1: reg 10 64bit mmio: [0xd0400000-
[ 0.206303] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0600000-
[ 0.206336] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.206338] pci 0000:00:1b.0: PME# disabled
[ 0.206387] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.206390] pci 0000:00:1c.0: PME# disabled
[ 0.206442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.206445] pci 0000:00:1c.1: PME# disabled
[ 0.206484] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f]
[ 0.206523] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f]
[ 0.206561] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f]
[ 0.206600] pci 0000:00:1d.3: reg 20 io port: [0xf020-0xf03f]
[ 0.206644] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0604000-
[ 0.206685] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.206689] pci 0000:00:1d.7: PME# disabled
[ 0.206789] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.206792] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.206795] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.206830] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.206835] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.206840] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.206845] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.206850] pci 0000:00:1f.1: reg 20 io port: [0xf0f0-0xf0ff]
[ 0.206881] pci 0000:00:1f.2: reg 10 io port: [0xf0e0-0xf0e7]
[ 0.206885] pci 0000:00:1f.2: reg 14 io port: [0xf0d0-0xf0d3]
[ 0.206889] pci 0000:00:1f.2: reg 18 io port: [0xf0c0-0xf0c7]
[ 0.206894] pci 0000:00:1f.2: reg 1c io port: [0xf0b0-0xf0b3]
[ 0.206898] pci 0000:00:1f.2: reg 20 io port: [0xf0a0-0xf0af]
[ 0.206916] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.206918] pci 0000:00:1f.2: PME# disabled
[ 0.206955] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.207079] pci 0000:03:00.0: reg 10 io port: [0xe000-0xe0ff]
[ 0.207096] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xd0514000-
[ 0.207108] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xd0510000-
[ 0.207115] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xd0500000-
[ 0.207150] pci 0000:03:00.0: supports D1 D2
[ 0.207151] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207155] pci 0000:03:00.0: PME# disabled
[ 0.207202] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.207205] pci 0000:00:1c.1: bridge 32bit mmio: [0xd0500000-
[ 0.207247] pci 0000:00:1e.0: transparent bridge
[ 0.207266] pci_bus 0000:00: on NUMA node 0
[ 0.207268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.207335] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.207395] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.207427] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.214043] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.214109] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.214175] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.214241] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.214305] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.214374] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.214440] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.214505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.214574] vgaarb: device added: PCI:0000:
[ 0.214582] vgaarb: loaded
[ 0.214668] SCSI subsystem initialized
[ 0.214721] libata version 3.00 loaded.
[ 0.214766] usbcore: registered new interface driver usbfs
[ 0.214774] usbcore: registered new interface driver hub
[ 0.214790] usbcore: registered new device driver usb
[ 0.214867] ACPI: WMI: Mapper loaded
[ 0.214868] PCI: Using ACPI for IRQ routing
[ 0.214970] NetLabel: Initializing
[ 0.214971] NetLabel: domain hash size = 128
[ 0.214972] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.214980] NetLabel: unlabeled traffic allowed by default
[ 0.215001] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.215004] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.220059] Switching to clocksource tsc
[ 0.221365] AppArmor: AppArmor Filesystem Enabled
[ 0.221371] pnp: PnP ACPI init
[ 0.221377] ACPI: bus type pnp registered
[ 0.223461] pnp: PnP ACPI: found 13 devices
[ 0.223463] ACPI: ACPI bus type pnp unregistered
[ 0.223466] PnPBIOS: Disabled by ACPI PNP
[ 0.223473] system 00:01: iomem range 0xfed14000-
[ 0.223475] system 00:01: iomem range 0xe0000000-
[ 0.223479] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.223481] system 00:02: ioport range 0x480-0x4bf has been reserved
[ 0.223483] system 00:02: iomem range 0xfec00000-
[ 0.223485] system 00:02: iomem range 0xfee00000-
[ 0.223486] system 00:02: iomem range 0xfed1c000-
[ 0.223488] system 00:02: iomem range 0xfed20000-
[ 0.223490] system 00:02: iomem range 0xff000000-
[ 0.223497] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.258141] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.258143] pci 0000:00:01.0: IO window: disabled
[ 0.258146] pci 0000:00:01.0: MEM window: disabled
[ 0.258148] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.258151] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.258153] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.258156] pci 0000:00:1c.0: MEM window: 0xd0700000-
[ 0.258160] pci 0000:00:1c.0: PREFETCH window: 0x000000d090000
[ 0.258164] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.258166] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.258170] pci 0000:00:1c.1: MEM window: 0xd0500000-
[ 0.258173] pci 0000:00:1c.1: PREFETCH window: 0x000000d0b0000
[ 0.258178] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.258179] pci 0000:00:1e.0: IO window: disabled
[ 0.258182] pci 0000:00:1e.0: MEM window: disabled
[ 0.258185] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.258197] alloc irq_desc for 16 on node -1
[ 0.258199] alloc kstat_irqs on node -1
[ 0.258205] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.258208] pci 0000:00:01.0: setting latency timer to 64
[ 0.258215] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.258218] pci 0000:00:1c.0: setting latency timer to 64
[ 0.258225] alloc irq_desc for 17 on node -1
[ 0.258227] alloc kstat_irqs on node -1
[ 0.258229] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.258232] pci 0000:00:1c.1: setting latency timer to 64
[ 0.258236] pci 0000:00:1e.0: setting latency timer to 64
[ 0.258240] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.258241] pci_bus 0000:00: resource 1 mem: [0x000000-
[ 0.258243] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.258245] pci_bus 0000:02: resource 1 mem: [0xd0700000-
[ 0.258247] pci_bus 0000:02: resource 2 pref mem [0xd0900000-
[ 0.258248] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.258250] pci_bus 0000:03: resource 1 mem: [0xd0500000-
[ 0.258251] pci_bus 0000:03: resource 2 pref mem [0xd0b00000-
[ 0.258253] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.258255] pci_bus 0000:04: resource 4 mem: [0x000000-
[ 0.258281] NET: Registered protocol family 2
[ 0.258353] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.258559] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.258904] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.259063] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.259064] TCP reno registered
[ 0.259109] NET: Registered protocol family 1
[ 0.259120] pci 0000:00:02.0: Boot video device
[ 0.287801] cpufreq-nforce2: No nForce2 chipset.
[ 0.287819] Scanning for low memory corruption every 60 seconds
[ 0.287890] audit: initializing netlink socket (disabled)
[ 0.287898] type=2000 audit(127686808
[ 0.294262] highmem bounce pool size: 64 pages
[ 0.294265] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.295227] VFS: Disk quotas dquot_6.5.2
[ 0.295264] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.295635] fuse init (API version 7.13)
[ 0.295696] msgmni has been set to 1664
[ 0.295834] alg: No test for stdrng (krng)
[ 0.295867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.295870] io scheduler noop registered
[ 0.295871] io scheduler anticipatory registered
[ 0.295872] io scheduler deadline registered
[ 0.295896] io scheduler cfq registered (default)
[ 0.295978] alloc irq_desc for 24 on node -1
[ 0.295979] alloc kstat_irqs on node -1
[ 0.295985] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.295990] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.296061] alloc irq_desc for 25 on node -1
[ 0.296062] alloc kstat_irqs on node -1
[ 0.296067] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.296073] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.296154] alloc irq_desc for 26 on node -1
[ 0.296156] alloc kstat_irqs on node -1
[ 0.296160] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.296166] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.296227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.296241] Firmware did not grant requested _OSC control
[ 0.296254] Firmware did not grant requested _OSC control
[ 0.296270] Firmware did not grant requested _OSC control
[ 0.296277] Firmware did not grant requested _OSC control
[ 0.296286] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.296351] input: Power Button as /devices/
[ 0.296358] ACPI: Power Button [PWRB]
[ 0.296386] input: Power Button as /devices/
[ 0.296388] ACPI: Power Button [PWRF]
[ 0.296672] ACPI: SSDT bdb5fc18 002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 0.296954] processor LNXCPU:00: registered as cooling_device0
[ 0.297103] processor LNXCPU:01: registered as cooling_device1
[ 0.299423] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.299504] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.299755] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.300465] brd: module loaded
[ 0.300762] loop: module loaded
[ 0.300809] input: Macintosh mouse button emulation as /devices/
[ 0.300859] ata_piix 0000:00:1f.1: version 2.13
[ 0.300866] alloc irq_desc for 18 on node -1
[ 0.300867] alloc kstat_irqs on node -1
[ 0.300870] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.300895] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.300948] scsi0 : ata_piix
[ 0.300992] scsi1 : ata_piix
[ 0.301741] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
[ 0.301742] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
[ 0.301755] alloc irq_desc for 19 on node -1
[ 0.301756] alloc kstat_irqs on node -1
[ 0.301759] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.301762] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.301783] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.301814] isapnp: Scanning for PnP cards...
[ 0.302174] Freeing initrd memory: 7779k freed
[ 0.304368] scsi2 : ata_piix
[ 0.350727] scsi3 : ata_piix
[ 0.351569] ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
[ 0.351572] ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
[ 0.351802] Fixed MDIO Bus: probed
[ 0.351825] PPP generic driver version 2.4.2
[ 0.351876] tun: Universal TUN/TAP device driver, 1.6
[ 0.351877] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.351942] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.351961] alloc irq_desc for 23 on node -1
[ 0.351962] alloc kstat_irqs on node -1
[ 0.351967] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.351981] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.351983] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.352003] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.352017] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.352025] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.355897] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.355912] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0604000
[ 0.359834] ata2: port disabled. ignoring.
[ 0.371703] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.371769] usb usb1: configuration #1 chosen from 1 choice
[ 0.371789] hub 1-0:1.0: USB hub found
[ 0.371794] hub 1-0:1.0: 8 ports detected
[ 0.371837] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.371845] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.371878] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.371884] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.371886] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.371905] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.371924] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 0.371980] usb usb2: configuration #1 chosen from 1 choice
[ 0.371996] hub 2-0:1.0: USB hub found
[ 0.372000] hub 2-0:1.0: 2 ports detected
[ 0.372032] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.372038] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.372040] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.372061] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.372079] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 0.372135] usb usb3: configuration #1 chosen from 1 choice
[ 0.372150] hub 3-0:1.0: USB hub found
[ 0.372154] hub 3-0:1.0: 2 ports detected
[ 0.372182] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.372186] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.372188] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.372207] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.372230] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 0.372288] usb usb4: configuration #1 chosen from 1 choice
[ 0.372303] hub 4-0:1.0: USB hub found
[ 0.372307] hub 4-0:1.0: 2 ports detected
[ 0.372334] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.372339] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.372341] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.372365] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.372388] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 0.372441] usb usb5: configuration #1 chosen from 1 choice
[ 0.372457] hub 5-0:1.0: USB hub found
[ 0.372461] hub 5-0:1.0: 2 ports detected
[ 0.372521] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.372523] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.372989] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.373036] mice: PS/2 mouse device common for all mice
[ 0.373104] rtc_cmos 00:08: RTC can wake from S4
[ 0.373128] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.373148] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.373211] device-mapper: uevent: version 1.0.3
[ 0.373266] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 0.373303] device-mapper: multipath: version 1.1.0 loaded
[ 0.373305] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.373371] EISA: Probing bus 0 at eisa.0
[ 0.373374] Cannot allocate resource for EISA slot 1
[ 0.373390] EISA: Detected 0 cards.
[ 0.373434] cpuidle: using governor ladder
[ 0.373436] cpuidle: using governor menu
[ 0.373720] TCP cubic registered
[ 0.373817] NET: Registered protocol family 10
[ 0.374121] lo: Disabled Privacy Extensions
[ 0.374335] NET: Registered protocol family 17
[ 0.374530] Using IPI No-Shortcut mode
[ 0.374573] PM: Resume from disk failed.
[ 0.374581] registered taskstats version 1
[ 0.374783] Magic number: 14:758:584
[ 0.374838] rtc_cmos 00:08: setting system clock to 2010-06-18 13:34:46 UTC (1276868086)
[ 0.374840] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.374841] EDD information not available.
[ 0.445382] input: AT Translated Set 2 keyboard as /devices/
[ 0.531181] ata3.00: ATA-8: WDC WD3200BEVT-00A0RT0, 01.01A01, max UDMA/133
[ 0.531183] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.544206] ata3.00: configured for UDMA/133
[ 0.654798] isapnp: No Plug & Play device found
[ 0.654897] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-0 01.0 PQ: 0 ANSI: 5
[ 0.654973] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.654974] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.655006] sd 2:0:0:0: [sda] Write Protect is off
[ 0.655008] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.655023] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.655115] sda: sda1 sda2 sda3
[ 0.719581] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 0.724313] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.724321] Freeing unused kernel memory: 656k freed
[ 0.724576] Write protecting the kernel text: 4676k
[ 0.724602] Write protecting the kernel read-only data: 1840k
[ 0.734407] udev: starting version 151
[ 0.778877] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.778894] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.778923] r8169 0000:03:00.0: setting latency timer to 64
[ 0.778960] alloc irq_desc for 27 on node -1
[ 0.778962] alloc kstat_irqs on node -1
[ 0.778973] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 0.779394] eth0: RTL8168d/8111d at 0xf8052000, 00:27:0e:24:9b:3f, XID 081000c0 IRQ 27
[ 0.852292] usb 1-5: configuration #1 chosen from 1 choice
[ 1.136009] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 1.155712] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 1.312507] usb 5-1: configuration #1 chosen from 1 choice
[ 9.560617] udev: starting version 151
[ 9.608822] Adding 9835512k swap on /dev/sda3. Priority:-1 extents:1 across:9835512k
[ 9.686000] Linux agpgart interface v0.103
[ 9.687767] agpgart-intel 0000:00:00.0: Intel G41 Chipset
[ 9.688964] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 9.689428] intel_rng: Firmware space is locked read-only. If you can't or
[ 9.689429] intel_rng: don't want to disable this in firmware setup, and if
[ 9.689430] intel_rng: you are certain that your system has a functional
[ 9.689430] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 9.698733] parport_pc 00:06: reported by Plug and Play ACPI
[ 9.698831] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,
[ 9.733174] lp: driver loaded but no devices found
[ 9.744787] [drm] Initialized drm 1.1.0 20060810
[ 9.748513] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 9.749287] cfg80211: Calling CRDA to update world regulatory domain
[ 9.750288] ppdev: user-space parallel port driver
[ 9.781112] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.781116] i915 0000:00:02.0: setting latency timer to 64
[ 9.785195] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 9.785198] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 9.785228] alloc irq_desc for 28 on node -1
[ 9.785229] alloc kstat_irqs on node -1
[ 9.785236] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 9.785239] [drm] set up 31M of stolen space
[ 9.792136] lp0: using parport0 (interrupt-driven).
[ 9.804113] cfg80211: World regulatory domain updated:
[ 9.804115] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.804117] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.804118] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.804120] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.804121] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.804123] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.804318] type=1505 audit(127686809
[ 9.804746] type=1505 audit(127686809
[ 9.804977] type=1505 audit(127686809
[ 9.840385] usbcore: registered new interface driver hiddev
[ 9.852746] input: Logitech USB-PS/2 Optical Mouse as /devices/
[ 9.852808] generic-usb 0003:046D:
[ 9.852821] usbcore: registered new interface driver usbhid
[ 9.852823] usbhid: v2.6:USB HID core driver
[ 9.892509] usb 1-5: reset high speed USB device using ehci_hcd and address 2
[ 9.964716] fb0: inteldrmfb frame buffer device
[ 9.964718] registered panic notifier
[ 9.964768] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20090903/
[ 9.964842] input: Video Bus as /devices/
[ 9.964911] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 9.965318] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.965346] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.965359] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.967780] vga16fb: initializing
[ 9.967782] vga16fb: mapped to 0xc00a0000
[ 9.967784] vga16fb: not registering due to another framebuffer present
[ 10.027999] phy0: Selected rate control algorithm 'minstrel'
[ 10.028457] zd1211rw 1-5:1.0: phy0
[ 10.028473] usbcore: registered new interface driver zd1211rw
[ 10.042751] hda_codec: ALC888: BIOS auto-probing.
[ 10.044018] input: HDA Digital PCBeep as /devices/
[ 10.075422] Console: switching to colour frame buffer device 160x64
[ 10.762492] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 10.861847] r8169: eth0: link down
[ 10.861973] ADDRCONF(
[ 10.872787] usb 1-5: firmware: requesting zd1211/zd1211b_ub
[ 10.927434] type=1505 audit(127686809
[ 10.928440] type=1505 audit(127686809
[ 10.928893] type=1505 audit(127686809
[ 10.929127] type=1505 audit(127686809
[ 10.931081] type=1505 audit(127686809
[ 10.936613] type=1505 audit(127686809
[ 10.939988] type=1505 audit(127686809
[ 11.118027] usb 1-5: firmware: requesting zd1211/zd1211b_uphr
[ 11.161039] zd1211rw 1-5:1.0: firmware version 4725
[ 11.202042] zd1211rw 1-5:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
[ 11.204423] cfg80211: Calling CRDA for country: DE
[ 11.205807] cfg80211: Regulatory domain changed to country: DE
[ 11.205809] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.205811] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.205812] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.205814] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 11.332670] ADDRCONF(
[ 11.702774] CPU0 attaching NULL sched-domain.
[ 11.702778] CPU1 attaching NULL sched-domain.
[ 11.720543] CPU0 attaching sched-domain:
[ 11.720545] domain 0: span 0-1 level MC
[ 11.720547] groups: 0 1
[ 11.720551] CPU1 attaching sched-domain:
[ 11.720552] domain 0: span 0-1 level MC
[ 11.720554] groups: 1 0
[ 12.885350] CPU0 attaching NULL sched-domain.
[ 12.885355] CPU1 attaching NULL sched-domain.
[ 12.904553] CPU0 attaching sched-domain:
[ 12.904556] domain 0: span 0-1 level MC
[ 12.904558] groups: 0 1
[ 12.904562] CPU1 attaching sched-domain:
[ 12.904563] domain 0: span 0-1 level MC
[ 12.904565] groups: 1 0
[ 48.818184] wlan0: deauthenticating from 00:15:63:80:66:10 by local choice (reason=3)
[ 48.829144] wlan0: direct probe to AP 00:15:63:80:66:10 (try 1)
[ 48.832549] wlan0: direct probe responded
[ 48.832551] wlan0: authenticate with AP 00:15:63:80:66:10 (try 1)
[ 48.834385] wlan0: authenticated
[ 48.834399] wlan0: associate with AP 00:15:63:80:66:10 (try 1)
[ 48.837138] wlan0: RX AssocResp from 00:15:63:80:66:10 (capab=0x421 status=0 aid=15)
[ 48.837140] wlan0: associated
[ 48.837480] ADDRCONF(
[ 48.837517] cfg80211: Calling CRDA for country: GB
[ 48.849641] cfg80211: Received country IE:
[ 48.849643] cfg80211: Regulatory domain: GB
[ 48.849644] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.849646] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
[ 48.849647] cfg80211: CRDA thinks this should applied:
[ 48.849649] cfg80211: Regulatory domain: GB
[ 48.849650] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.849652] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.849653] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.849655] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.849656] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 48.849657] cfg80211: We intersect both of these and get:
[ 48.849658] cfg80211: Regulatory domain: 98
[ 48.849659] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.849661] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 48.849664] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
[ 48.849667] cfg80211: Current regulatory domain updated by AP to: GB
[ 48.849668] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.849669] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 59.744004] wlan0: no IPv6 routers present
--- On Fri, 18/6/10, actionparsnip <email address hidden> wrote:
From: actionparsnip <email address hidden>
Subject: Re: [Question #114919]: my internet (wifi) connection keeps disconnecting. It work ok with fedora.
To: <email address hidden>
Date: Friday, 18 June, 2010, 12:11
Your question #114919 on gnome-nettool in ubuntu changed:
https:/
Status: Open => Needs information
actionparsnip requested for more information:
Sounds like a bug to me. Can you reboot and give the output of
dmesg > ~/dmesg.txt; gedit ~/dmesg.txt; rm ~/dmesg.txt
Thanks
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
You received this question notification because you are a direct
subscriber of the question.
|
Revision history for this message
|
#8 |
[ 11.118027] usb 1-5: firmware: requesting zd1211/zd1211b_uphr
[ 11.161039] zd1211rw 1-5:1.0: firmware version 4725
Is there a later version of the firmware you are using?
|
Revision history for this message
|
#9 |
I've installed all the updates using the updatemanager! Not sure how else I could test for most uptodate firmware?
--- On Fri, 18/6/10, actionparsnip <email address hidden> wrote:
From: actionparsnip <email address hidden>
Subject: Re: [Question #114919]: my internet (wifi) connection keeps disconnecting. It work ok with fedora.
To: <email address hidden>
Date: Friday, 18 June, 2010, 14:56
Your question #114919 on gnome-nettool in ubuntu changed:
https:/
Status: Open => Needs information
actionparsnip requested for more information:
[ 11.118027] usb 1-5: firmware: requesting zd1211/zd1211b_uphr
[ 11.161039] zd1211rw 1-5:1.0: firmware version 4725
Is there a later version of the firmware you are using?
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
You received this question notification because you are a direct
subscriber of the question.
|
Revision history for this message
|
#10 |
It will not reconnect until I remove the usb dongle and reinsert it!
after the disconnection I get:
dmesg | tail
[ 2892.672015] wlan0: direct probe to AP 00:15:63:80:66:10 (try 3)
[ 2892.872014] wlan0: direct probe to AP 00:15:63:80:66:10 timed out
[ 2898.246346] wlan0: direct probe to AP 00:15:63:80:66:10 (try 1)
[ 2898.444013] wlan0: direct probe to AP 00:15:63:80:66:10 (try 2)
[ 2898.644093] wlan0: direct probe to AP 00:15:63:80:66:10 (try 3)
[ 2898.844016] wlan0: direct probe to AP 00:15:63:80:66:10 timed out
[ 2904.218459] wlan0: direct probe to AP 00:15:63:80:66:10 (try 1)
[ 2904.416015] wlan0: direct probe to AP 00:15:63:80:66:10 (try 2)
[ 2904.616018] wlan0: direct probe to AP 00:15:63:80:66:10 (try 3)
[ 2904.816013] wlan0: direct probe to AP 00:15:63:80:66:10 timed out
--- On Fri, 18/6/10, actionparsnip <email address hidden> wrote:
From: actionparsnip <email address hidden>
Subject: Re: [Question #114919]: my internet (wifi) connection keeps disconnecting. It work ok with fedora.
To: <email address hidden>
Date: Friday, 18 June, 2010, 14:56
Your question #114919 on gnome-nettool in ubuntu changed:
https:/
Status: Open => Needs information
actionparsnip requested for more information:
[ 11.118027] usb 1-5: firmware: requesting zd1211/zd1211b_uphr
[ 11.161039] zd1211rw 1-5:1.0: firmware version 4725
Is there a later version of the firmware you are using?
--
To answer this request for more information, you can either reply to
this email or enter your reply at the following page:
https:/
You received this question notification because you are a direct
subscriber of the question.
|
Revision history for this message
|
#11 |
Websearches to find the file.... maybe there is a revised firmware which is more solid.
Can you help with this problem?
Provide an answer of your own, or ask david fairhurst for more information if necessary.
