Drew a blank with my audio device in Xubuntu... (module snd-fm801)
Switched from Windows ME to Xubuntu...
I've been trying all I could for 2 months, but my system is still without audio.
Here's the output of my Terminal shell:
-------
maria@ubuntu-
WARNING: you should run this program as super-user.
*-multimedia
description: Multimedia audio controller
product: Xwave QS3000A [FM801]
vendor: Fortemedia, Inc
physical id: b
bus info: pci@0000:00:0b.0
version: b1
width: 32 bits
clock: 33MHz
-------
And here's my alsa base file:
-------
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; : ; }
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe -Qb snd-seq ; }
install snd-pcm /sbin/modprobe --ignore-install snd-pcm && { /sbin/modprobe --quiet snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer && { /sbin/modprobe --quiet snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq && { /sbin/modprobe --quiet snd-seq-midi ; /sbin/modprobe --quiet snd-seq-oss ; : ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq ; }
# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe -Qb saa7134-alsa ; : ; }
# Load snd-seq for devices that don't have hardware midi;
# Ubuntu #26283, #43682, #56005; works around Ubuntu #34831 for
# non-Creative Labs PCI hardware
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe -Qb snd-seq ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-usx2y index=-2
options snd-usb-caiaq index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
-------
After posting questions on this forum I edited the "etc/modules" (I used sudo vi)...
Now it looks so:
-------
maria@
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
loop
lp
fuse
snd-fm801
-------
I used "sudo alsamixer" and pressed M to change the "MM" under each column in "00"
and the UP-arrow to set the volume at a high level (something like 70%-100%, with more attempts)...
The "PC Speak" column was set by me at 100 (0 dB) at first... now it's at 80 (-9 dB, I can read the output in dB in the row "Item")
Pressed ESC... restarted the system... opened a Terminal window to check if the alsamixer settings had been saved... Ok...
However... after restarting the System, I can't still hear anything!
I also tried adding this line at the end of the alsabase file:
options snd-fm801 index=0
asking to load my ForteMedia Audio801 as default soundcard... No Results!
What more should ɪ tryʔ Anyone knows how to fix this???
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Can you help with this problem?
Provide an answer of your own, or ask mir4ge for more information if necessary.