Ubuntu

No Mic With Feisty

Asked by RichPicker

I apologize if this is a redundant report. I don't know if a bug has been filed, or only questions asked and answered

My mic worked with Edgy, after some help from you. Then an upgrade killed it. I waited for Feisty, installed Feisty, and the mic still does not work.

I am a new person to Linux. Forgive me if I am not reporting this correctly. I am using a Dell laptop, Intel 386

Below is the information requested here: https://help.ubuntu.com/community/DebuggingSoundProblems

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
Cesare Tirabassi
Solved:
Last query:
Last reply:

This question was reopened

Revision history for this message
RichPicker (rich-braden) said : 		#1

rich@rich-laptop:~$ sudo tail -2 /proc/asound/oss/sndstat
Password:
Mixers:
0: SigmaTel STAC9200
rich@rich-laptop:~$

Revision history for this message
RichPicker (rich-braden) said : 		#2

rich@rich-laptop:~$ sudo amixer
Password:
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 7 [23%] [-36.00dB] [on]
  Front Right: Playback 7 [23%] [-36.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 15
  Front Left: Capture 14 [93%] [21.00dB] [on]
  Front Right: Capture 14 [93%] [21.00dB] [on]
Simple mixer control 'Capture Mux',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 4
  Front Left: 4 [100%] [40.00dB]
  Front Right: 4 [100%] [40.00dB]
Simple mixer control 'Input Source',0
  Capabilities: enum
  Items: 'Mic' 'Line'
  Item0: 'Mic'
rich@rich-laptop:~$

Revision history for this message
RichPicker (rich-braden) said : 		#3

rich@rich-laptop:~$ sudo lspci -nv
Password:
00:00.0 0600: 8086:2590 (rev 03)
        Subsystem: 1028:01c9
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:02.0 0300: 8086:2592 (rev 03) (prog-if 00 [VGA])
        Subsystem: 1028:01c9
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at eff8 [size=8]
        Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: [d0] Power Management version 2

00:02.1 0380: 8086:2792 (rev 03)
        Subsystem: 1028:01c9
        Flags: bus master, fast devsel, latency 0
        Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: [d0] Power Management version 2

00:1b.0 0403: 8086:2668 (rev 03)
        Subsystem: 1028:01c9
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at dfebc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 0604: 8086:2660 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: 0000:0000
        Capabilities: [a0] Power Management version 2

00:1c.3 0604: 8086:2666 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: dfc00000-dfdfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: 0000:0000
        Capabilities: [a0] Power Management version 2

00:1d.0 0c03: 8086:2658 (rev 03) (prog-if 00 [UHCI])
        Subsystem: 1028:01c9
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at bf80 [size=32]

00:1d.1 0c03: 8086:2659 (rev 03) (prog-if 00 [UHCI])
        Subsystem: 1028:01c9
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at bf60 [size=32]

00:1d.2 0c03: 8086:265a (rev 03) (prog-if 00 [UHCI])
        Subsystem: 1028:01c9
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at bf40 [size=32]

00:1d.3 0c03: 8086:265b (rev 03) (prog-if 00 [UHCI])
        Subsystem: 1028:01c9
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at bf20 [size=32]

00:1d.7 0c03: 8086:265c (rev 03) (prog-if 20 [EHCI])
        Subsystem: 1028:01c9
        Flags: bus master, medium devsel, latency 0, IRQ 16
        Memory at b0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 0604: 8086:2448 (rev d3) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        Memory behind bridge: dfb00000-dfbfffff
        Capabilities: [50] Subsystem: 1028:01c9

00:1f.0 0601: 8086:2641 (rev 03)
        Subsystem: 1028:01c9
        Flags: bus master, medium devsel, latency 0

00:1f.1 0101: 8086:266f (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: 1028:01c9
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at bfa0 [size=16]

02:00.0 0200: 14e4:170c (rev 02)
        Subsystem: 1028:01c9
        Flags: bus master, fast devsel, latency 64, IRQ 19
        Memory at dfbfe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [40] Power Management version 2

02:03.0 0280: 8086:4220 (rev 05)
        Subsystem: 8086:2721
        Flags: bus master, medium devsel, latency 64, IRQ 18
        Memory at dfbfd000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2

rich@rich-laptop:~$

Revision history for this message
RichPicker (rich-braden) said : 		#4

rich@rich-laptop:~$ sudo asoundconf list
Password:
Names of available sound cards:
Intel
rich@rich-laptop:~$

Revision history for this message
RichPicker (rich-braden) said : 		#5

rich@rich-laptop:~$ sudo cat /etc/asound.conf ~/.asoundrc*
Password:
cat: /etc/asound.conf: No such file or directory
cat: /home/rich/.asoundrc*: No such file or directory
rich@rich-laptop:~$

Revision history for this message
RichPicker (rich-braden) said : 		#6

rich@rich-laptop:~$ sudo dmesg
Password:
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f6d3800 end: 000000001f7d3800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001f7d3800 size: 000000000082c800 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010007000 end: 00000000f0007000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 00000000000f0000 end: 00000000fee10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7d3800 (usable)
[ 0.000000] BIOS-e820: 000000001f7d3800 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 128979) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128979
[ 0.000000] HighMem 128979 -> 128979
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128979
[ 0.000000] On node 0 totalpages: 128979
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123908 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc970
[ 0.000000] ACPI: RSDT (v001 DELL D05 0x27d6041b ASL 0x00000061) @ 0x1f7d3fd3
[ 0.000000] ACPI: FADT (v001 DELL D05 0x27d6041b ASL 0x00000061) @ 0x1f7d4c00
[ 0.000000] ACPI: MADT (v001 DELL D05 0x27d6041b ASL 0x00000047) @ 0x1f7d5400
[ 0.000000] ACPI: MCFG (v016 DELL D05 0x27d6041b ASL 0x00000061) @ 0x1f7d53c0
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1f7d43e2
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1f7d420a
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x1f7d400f
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Detected 1695.852 MHz processor.
[ 6.649258] Built 1 zonelists. Total pages: 127972
[ 6.649262] Kernel command line: root=UUID=a9fd0dee-1e0d-445a-b3ca-9d8984fd57bb ro quiet splash
[ 6.649428] mapped APIC to ffffd000 (fee00000)
[ 6.649430] mapped IOAPIC to ffffc000 (fec00000)
[ 6.649434] Enabling fast FPU save and restore... done.
[ 6.649437] Enabling unmasked SIMD FPU exception support... done.
[ 6.649445] Initializing CPU#0
[ 6.649521] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 6.651485] Console: colour VGA+ 80x25
[ 6.651700] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.651942] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 6.664515] Memory: 500544k/515916k available (1992k kernel code, 14880k reserved, 893k data, 328k init, 0k highmem)
[ 6.664527] virtual kernel memory layout:
[ 6.664528] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 6.664529] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 6.664531] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 6.664532] lowmem : 0xc0000000 - 0xdf7d3000 ( 503 MB)
[ 6.664533] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 6.664534] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 6.664536] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 6.664539] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 6.741406] Calibrating delay using timer specific routine.. 3395.31 BogoMIPS (lpj=6790629)
[ 6.741449] Security Framework v1.0.0 initialized
[ 6.741457] SELinux: Disabled at boot.
[ 6.741473] Mount-cache hash table entries: 512
[ 6.741619] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[ 6.741631] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 6.741634] CPU: L2 cache: 2048K
[ 6.741637] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
[ 6.741647] Compat vDSO mapped to ffffe000.
[ 6.741651] Remapping vsyscall page to ffffe000
[ 6.741662] Checking 'hlt' instruction... OK.
[ 6.757485] SMP alternatives: switching to UP code
[ 6.757688] Freeing SMP alternatives: 11k freed
[ 6.757868] Early unpacking initramfs... done
[ 7.085605] ACPI: Core revision 20060707
[ 7.093290] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 7.095603] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08
[ 7.095627] Total of 1 processors activated (3395.31 BogoMIPS).
[ 7.095817] ENABLING IO-APIC IRQs
[ 7.096020] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.240778] Brought up 1 CPUs
[ 7.241019] Booting paravirtualized kernel on bare hardware
[ 7.241095] Time: 4:05:49 Date: 04/11/107
[ 7.241122] NET: Registered protocol family 16
[ 7.241204] EISA bus registered
[ 7.241209] ACPI: bus type pci registered
[ 7.271846] PCI: PCI BIOS revision 2.10 entry at 0xfba7e, last bus=13
[ 7.271849] PCI: Using configuration type 1
[ 7.271850] Setting up standard PCI resources
[ 7.287827] ACPI: Interpreter enabled
[ 7.287830] ACPI: Using IOAPIC for interrupt routing
[ 7.289031] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 7.289039] PCI: Probing PCI hardware (bus 00)
[ 7.289126] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 7.302410] Boot video device is 0000:00:02.0
[ 7.302995] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 7.302999] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 7.303464] PCI: Transparent bridge - 0000:00:1e.0
[ 7.303522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 7.321503] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 7.321758] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 7.322007] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 7.322254] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[ 7.322491] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 7.322731] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 7.322970] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 7.323692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 7.323986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 7.324372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 7.324780] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.324792] pnp: PnP ACPI init
[ 7.355074] pnp: PnP ACPI: found 11 devices
[ 7.355079] PnPBIOS: Disabled by ACPI PNP
[ 7.355118] PCI: Using ACPI for IRQ routing
[ 7.355123] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 7.383582] NET: Registered protocol family 8
[ 7.383584] NET: Registered protocol family 20
[ 7.399735] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 7.399738] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[ 7.399742] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[ 7.399746] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 7.399749] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 7.399752] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 7.399755] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 7.399758] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 7.399761] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 7.399767] pnp: 00:08: ioport range 0x900-0x90f has been reserved
[ 7.399769] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 7.399772] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 7.399774] pnp: 00:08: ioport range 0x930-0x93f has been reserved
[ 7.399777] pnp: 00:08: ioport range 0x940-0x97f has been reserved
[ 7.400022] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 7.400026] PCI: Bridge: 0000:00:1c.0
[ 7.400027] IO window: disabled.
[ 7.400034] MEM window: disabled.
[ 7.400038] PREFETCH window: disabled.
[ 7.400044] PCI: Bridge: 0000:00:1c.3
[ 7.400047] IO window: d000-dfff
[ 7.400054] MEM window: dfc00000-dfdfffff
[ 7.400058] PREFETCH window: d0000000-d01fffff
[ 7.400065] PCI: Bridge: 0000:00:1e.0
[ 7.400066] IO window: disabled.
[ 7.400072] MEM window: dfb00000-dfbfffff
[ 7.400077] PREFETCH window: disabled.
[ 7.400106] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.400115] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 7.400138] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 7.400144] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 7.400157] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 7.400178] NET: Registered protocol family 2
[ 7.436518] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 7.436591] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 7.436696] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 7.436750] TCP: Hash tables configured (established 16384 bind 8192)
[ 7.436753] TCP reno registered
[ 7.448554] checking if image is initramfs... it is
[ 8.096901] Freeing initrd memory: 6752k freed
[ 8.097400] audit: initializing netlink socket (disabled)
[ 8.097419] audit(1178856349.532:1): initialized
[ 8.097557] VFS: Disk quotas dquot_6.5.1
[ 8.097579] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.097640] io scheduler noop registered
[ 8.097643] io scheduler anticipatory registered
[ 8.097646] io scheduler deadline registered
[ 8.097658] io scheduler cfq registered (default)
[ 8.097919] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.097976] assign_interrupt_mode Found MSI capability
[ 8.097980] Allocate Port Service[0000:00:1c.0:pcie00]
[ 8.098013] Allocate Port Service[0000:00:1c.0:pcie02]
[ 8.098129] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 8.098183] assign_interrupt_mode Found MSI capability
[ 8.098185] Allocate Port Service[0000:00:1c.3:pcie00]
[ 8.098215] Allocate Port Service[0000:00:1c.3:pcie02]
[ 8.098384] isapnp: Scanning for PnP cards...
[ 8.452187] isapnp: No Plug & Play device found
[ 8.476993] Real Time Clock Driver v1.12ac
[ 8.477060] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 8.477741] mice: PS/2 mouse device common for all mice
[ 8.478285] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 8.478531] input: Macintosh mouse button emulation as /class/input/input0
[ 8.478563] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 8.478568] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 8.478801] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.478928] i8042.c: Warning: Keylock active.
[ 8.481049] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.481053] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.481174] EISA: Probing bus 0 at eisa.0
[ 8.481184] Cannot allocate resource for EISA slot 1
[ 8.481212] EISA: Detected 0 cards.
[ 8.511282] TCP cubic registered
[ 8.511294] NET: Registered protocol family 1
[ 8.511317] Using IPI No-Shortcut mode
[ 8.511394] ACPI: (supports S0 S3 S4 S5)
[ 8.511446] Magic number: 7:752:59
[ 8.511776] Freeing unused kernel memory: 328k freed
[ 8.512362] input: AT Translated Set 2 keyboard as /class/input/input1
[ 8.515015] Time: tsc clocksource has been installed.
[ 9.719582] Capability LSM initialized
[ 9.752454] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 9.752460] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 9.752467] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 9.757184] ACPI: Thermal Zone [THM] (38 C)
[ 10.070377] usbcore: registered new interface driver usbfs
[ 10.070399] usbcore: registered new interface driver hub
[ 10.070418] usbcore: registered new device driver usb
[ 10.071202] USB Universal Host Controller Interface driver v3.0
[ 10.071254] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.071267] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 10.071271] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.071433] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.071465] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 10.071558] usb usb1: configuration #1 chosen from 1 choice
[ 10.071578] hub 1-0:1.0: USB hub found
[ 10.071583] hub 1-0:1.0: 2 ports detected
[ 10.172947] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 10.172962] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 10.172967] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.172989] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 10.173022] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60
[ 10.173112] usb usb2: configuration #1 chosen from 1 choice
[ 10.173135] hub 2-0:1.0: USB hub found
[ 10.173141] hub 2-0:1.0: 2 ports detected
[ 10.276787] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 10.276801] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 10.276806] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 10.276827] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 10.276860] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
[ 10.276955] usb usb3: configuration #1 chosen from 1 choice
[ 10.276979] hub 3-0:1.0: USB hub found
[ 10.276984] hub 3-0:1.0: 2 ports detected
[ 3.556000] Time: acpi_pm clocksource has been installed.
[ 3.636000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 3.636000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.636000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.636000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.636000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20
[ 3.636000] usb usb4: configuration #1 chosen from 1 choice
[ 3.636000] hub 4-0:1.0: USB hub found
[ 3.636000] hub 4-0:1.0: 2 ports detected
[ 3.740000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.740000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.740000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.740000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.740000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.740000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.740000] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xb0000000
[ 3.744000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.744000] usb usb5: configuration #1 chosen from 1 choice
[ 3.744000] hub 5-0:1.0: USB hub found
[ 3.744000] hub 5-0:1.0: 8 ports detected
[ 3.852000] SCSI subsystem initialized
[ 3.856000] b44.c:v1.01 (Jun 16, 2006)
[ 3.856000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 3.860000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:22:ab:33:17
[ 3.860000] libata version 2.20 loaded.
[ 3.864000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.864000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.864000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.864000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 3.864000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 3.864000] scsi0 : ata_piix
[ 4.304000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
[ 4.304000] ata1.00: ATA-6: ST960822A, 8.03, max UDMA/100
[ 4.304000] ata1.00: 117210240 sectors, multi 8: LBA48
[ 4.304000] ata1.01: ATAPI, max UDMA/33
[ 4.312000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
[ 4.312000] ata1.00: configured for UDMA/100
[ 4.476000] ata1.01: configured for UDMA/33
[ 4.476000] scsi1 : ata_piix
[ 4.476000] ata2: port disabled. ignoring.
[ 4.476000] scsi 0:0:0:0: Direct-Access ATA ST960822A 8.03 PQ: 0 ANSI: 5
[ 4.476000] scsi 0:0:1:0: CD-ROM SONY DVD+-RW DW-Q58A UDS1 PQ: 0 ANSI: 5
[ 4.488000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 4.488000] sda: Write Protect is off
[ 4.488000] sda: Mode Sense: 00 3a 00 00
[ 4.488000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.488000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 4.488000] sda: Write Protect is off
[ 4.488000] sda: Mode Sense: 00 3a 00 00
[ 4.488000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.488000] sda: sda1 sda2 < sda5 >
[ 4.536000] sd 0:0:0:0: Attached scsi disk sda
[ 4.536000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.536000] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.544000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.544000] Uniform CD-ROM driver Revision: 3.20
[ 4.544000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 4.724000] Attempting manual resume
[ 4.724000] swsusp: Resume From Partition 8:5
[ 4.724000] PM: Checking swsusp image.
[ 4.724000] PM: Resume from disk failed.
[ 4.764000] kjournald starting. Commit interval 5 seconds
[ 4.764000] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.272000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.276000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.432000] NET: Registered protocol family 17
[ 18.532000] Linux agpgart interface v0.102 (c) Dave Jones
[ 18.536000] agpgart: Detected an Intel 915GM Chipset.
[ 18.536000] agpgart: Detected 7932K stolen memory.
[ 18.552000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 18.816000] iTCO_vendor_support: vendor-support=0
[ 18.852000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 18.852000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 18.852000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.900000] intel_rng: FWH not detected
[ 19.092000] input: PC Speaker as /class/input/input2
[ 19.168000] ieee80211_crypt: registered algorithm 'NULL'
[ 19.172000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.172000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 19.236000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 19.236000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 19.252000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 19.252000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 19.456000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 19.648000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.648000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 19.672000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x200000
[ 19.712000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 20.244000] lp: driver loaded but no devices found
[ 20.264000] Adding 1485972k swap on /dev/disk/by-uuid/eea6a311-63af-4c21-9b43-f0ea7310911c. Priority:-1 extents:1 across:1485972k
[ 20.328000] EXT3 FS on sda1, internal journal
[ 24.716000] ACPI: AC Adapter [AC] (on-line)
[ 25.024000] ACPI: Battery Slot [BAT0] (battery present)
[ 25.080000] input: Lid Switch as /class/input/input4
[ 25.084000] ACPI: Lid Switch [LID]
[ 25.124000] input: Power Button (CM) as /class/input/input5
[ 25.128000] ACPI: Power Button (CM) [PBTN]
[ 25.168000] input: Sleep Button (CM) as /class/input/input6
[ 25.172000] ACPI: Sleep Button (CM) [SBTN]
[ 25.188000] Using specific hotkey driver
[ 25.216000] No dock devices found.
[ 25.276000] ibm_acpi: ec object not found
[ 25.384000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 25.384000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 25.408000] pcc_acpi: loading...
[ 29.624000] [drm] Initialized drm 1.1.0 20060810
[ 29.628000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.632000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 30.352000] ppdev: user-space parallel port driver
[ 31.380000] apm: BIOS not found.
[ 32.096000] Bluetooth: Core ver 2.11
[ 32.096000] NET: Registered protocol family 31
[ 32.096000] Bluetooth: HCI device and connection manager initialized
[ 32.096000] Bluetooth: HCI socket layer initialized
[ 32.188000] Bluetooth: L2CAP ver 2.8
[ 32.188000] Bluetooth: L2CAP socket layer initialized
[ 32.328000] Bluetooth: RFCOMM socket layer initialized
[ 32.328000] Bluetooth: RFCOMM TTY layer initialized
[ 32.328000] Bluetooth: RFCOMM ver 1.8
[ 45.056000] NET: Registered protocol family 10
[ 45.056000] lo: Disabled Privacy Extensions
[ 45.056000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 55.644000] eth1: no IPv6 routers present
[ 1399.444000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1399.556000] ISO 9660 Extensions: RRIP_1991A
rich@rich-laptop:~$

Revision history for this message
RichPicker (rich-braden) said : 		#7

rich@rich-laptop:~$ sudo cat /proc/interrupts
Password:
           CPU0
  0: 787980 IO-APIC-edge timer
  1: 3976 IO-APIC-edge i8042
  8: 3 IO-APIC-edge rtc
  9: 4 IO-APIC-fasteoi acpi
 12: 692014 IO-APIC-edge i8042
 14: 40606 IO-APIC-edge libata
 15: 0 IO-APIC-edge libata
 16: 193121 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0
 17: 0 IO-APIC-fasteoi uhci_hcd:usb4
 18: 53601 IO-APIC-fasteoi uhci_hcd:usb2, ipw2200
 19: 0 IO-APIC-fasteoi uhci_hcd:usb3, eth0
NMI: 0
LOC: 787857
ERR: 0
MIS: 0
rich@rich-laptop:~$

Revision history for this message
RichPicker (rich-braden) said : 		#8

It is an external mic that plugs in next to the headphone in the side of the sound card. I have checked that all capture volumes are on max, nothing is muted, the mic works itself, and it is plugged in correctly. It does not work with Sound Recorder or Audacity. Thank you.

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#9

Thanks for your detailed report Rich. After having a look at it, I would kindly ask you for a couple of additional info:

1) the output od an lspci -v command
2) the output of an lsmod command
3) the output of an ls -la /dev/snd/* command
3) the output of a cat /tmp/alsainfo/alsa-hda-intel.tmp command

I would also ask you to check in Menu->System->Preferences->Sound what is selected in the Sound Capture entry, what entries are available and if you tested them all.

Can I assume that you have no other sound problem except this?
Can I also assume that you checked this is not an hardware error (ie. everything works with another OS)?

Revision history for this message
RichPicker (rich-braden) said : 		#10

Cesare:
Thank you for your prompt reply.

The 4 outputs are attached as plain text documents.

In System>Preferences>Sound Preferences I have the
following Sound Capture options:

STAC92xx Analog
ALSA - Advanced Linux Sound Architecture
OSS - Open Sound System
Test Sound
Silence

I have tested each of these.

I am 99.99% positive the microphone functions
correctly. Just to be sure, I will perform another
test after I send this email, and then reply with
those test results.

Thank you.

--- Cesare Tirabassi
<email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Status: Open => Answered
>
> Cesare Tirabassi proposed the following answer:
> Thanks for your detailed report Rich. After having a
> look at it, I would
> kindly ask you for a couple of additional info:
>
> 1) the output od an lspci -v command
> 2) the output of an lsmod command
> 3) the output of an ls -la /dev/snd/* command
> 3) the output of a cat
> /tmp/alsainfo/alsa-hda-intel.tmp command
>
> I would also ask you to check in
> Menu->System->Preferences->Sound what
> is selected in the Sound Capture entry, what entries
> are available and
> if you tested them all.
>
> Can I assume that you have no other sound problem
> except this?
> Can I also assume that you checked this is not an
> hardware error (ie. everything works with another
> OS)?
>
>
_______________________________________________________________________
> If this answers your question, please go to the
> following page to let us
> know that it is solved:
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=8
>
> If you still need help, you can reply to this email
> or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/6414
>

____________________________________________________________________________________Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
http://farechase.yahoo.com/

Revision history for this message
RichPicker (rich-braden) said : 		#11

I'm not sure if the attachments were posted. I will
include the test results here:
------------------------
rich@rich-laptop:~$ sudo lspci -v
Password:
00:00.0 Host bridge: Intel Corporation Mobile
915GM/PM/GMS/910GML Express Processor to DRAM
Controller (rev 03)
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation
Mobile 915GM/GMS/910GML Express Graphics Controller
(rev 03) (prog-if 00 [VGA])
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, fast devsel, latency 0, IRQ
16
        Memory at dff00000 (32-bit, non-prefetchable)
[size=512K]
        I/O ports at eff8 [size=8]
        Memory at c0000000 (32-bit, prefetchable)
[size=256M]
        Memory at dfec0000 (32-bit, non-prefetchable)
[size=256K]
        Capabilities: [d0] Power Management version 2

00:02.1 Display controller: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller (rev 03)
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, fast devsel, latency 0
        Memory at dff80000 (32-bit, non-prefetchable)
[size=512K]
        Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition
Audio Controller (rev 03)
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, fast devsel, latency 0, IRQ
16
        Memory at dfebc000 (64-bit, non-prefetchable)
[size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled
Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 PCI bridge: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1
(rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0b, subordinate=0b,
sec-latency=0
        Capabilities: [40] Express Root Port (Slot+)
IRQ 0
        Capabilities: [80] Message Signalled
Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: Gammagraphx,
Inc. Unknown device 0000
        Capabilities: [a0] Power Management version 2

00:1c.3 PCI bridge: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4
(rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0c, subordinate=0d,
sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: dfc00000-dfdfffff
        Prefetchable memory behind bridge:
00000000d0000000-00000000d01fffff
        Capabilities: [40] Express Root Port (Slot+)
IRQ 0
        Capabilities: [80] Message Signalled
Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [90] Subsystem: Gammagraphx,
Inc. Unknown device 0000
        Capabilities: [a0] Power Management version 2

00:1d.0 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev
03) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, medium devsel, latency 0,
IRQ 16
        I/O ports at bf80 [size=32]

00:1d.1 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev
03) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, medium devsel, latency 0,
IRQ 18
        I/O ports at bf60 [size=32]

00:1d.2 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev
03) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, medium devsel, latency 0,
IRQ 19
        I/O ports at bf40 [size=32]

00:1d.3 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev
03) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, medium devsel, latency 0,
IRQ 17
        I/O ports at bf20 [size=32]

00:1d.7 USB Controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI
Controller (rev 03) (prog-if 20 [EHCI])
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, medium devsel, latency 0,
IRQ 16
        Memory at b0000000 (32-bit, non-prefetchable)
[size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI
Bridge (rev d3) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02,
sec-latency=32
        Memory behind bridge: dfb00000-dfbfffff
        Capabilities: [50] Subsystem: Dell Unknown
device 01c9

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M)
LPC Interface Bridge (rev 03)
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller
(rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, medium devsel, latency 0,
IRQ 16
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at bfa0 [size=16]

02:00.0 Ethernet controller: Broadcom Corporation
BCM4401-B0 100Base-TX (rev 02)
        Subsystem: Dell Unknown device 01c9
        Flags: bus master, fast devsel, latency 64,
IRQ 19
        Memory at dfbfe000 (32-bit, non-prefetchable)
[size=8K]
        Capabilities: [40] Power Management version 2

02:03.0 Network controller: Intel Corporation
PRO/Wireless 2200BG Network Connection (rev 05)
        Subsystem: Intel Corporation Unknown device
2721
        Flags: bus master, medium devsel, latency 64,
IRQ 18
        Memory at dfbfd000 (32-bit, non-prefetchable)
[size=4K]
        Capabilities: [dc] Power Management version 2

rich@rich-laptop:~$
------------------------
rich@rich-laptop:~$ sudo lsmod
Password:
Module Size Used by
isofs 36284 1
udf 85252 0
ipv6 268704 8
binfmt_misc 12680 1
rfcomm 40856 0
l2cap 25728 5 rfcomm
bluetooth 55908 4 rfcomm,l2cap
ppdev 10116 0
i915 24448 2
drm 81044 3 i915
acpi_cpufreq 10056 1
cpufreq_userspace 5408 0
cpufreq_stats 7360 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9228 1
freq_table 5792 3
acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 8200 0
tc1100_wmi 8068 0
pcc_acpi 13184 0
dev_acpi 12292 0
sony_acpi 6284 0
video 16388 0
sbs 15652 0
i2c_ec 5888 1 sbs
i2c_core 22784 1 i2c_ec
dock 10268 0
button 8720 0
battery 10756 0
container 5248 0
ac 6020 0
asus_acpi 17308 0
backlight 7040 1 asus_acpi
parport_pc 36388 0
lp 12452 0
parport 36936 3 ppdev,parport_pc,lp
joydev 10816 0
snd_hda_intel 21912 1
snd_hda_codec 205440 1 snd_hda_intel
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_pcm 79876 3
snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
ipw2200 148040 0
ieee80211 34760 1 ipw2200
ieee80211_crypt 7040 1 ieee80211
snd_seq_midi 9600 0
snd_rawmidi 25472 1 snd_seq_midi
snd_seq_midi_event 8448 2
snd_seq_oss,snd_seq_midi
snd_seq 52592 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 23684 2 snd_pcm,snd_seq
snd_seq_device 9100 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
pcspkr 4224 0
iTCO_wdt 11812 0
iTCO_vendor_support 4868 1 iTCO_wdt
af_packet 23816 6
serio_raw 7940 0
psmouse 38920 0
snd 54020 12
snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8672 1 snd
intel_agp 25116 1
shpchp 34324 0
pci_hotplug 32576 1 shpchp
snd_page_alloc 10888 2 snd_hda_intel,snd_pcm
agpgart 35400 3 drm,intel_agp
evdev 11008 4
tsdev 8768 0
ext3 133128 1
jbd 59816 1 ext3
mbcache 9604 1 ext3
sg 36252 0
sr_mod 17060 1
cdrom 37664 1 sr_mod
sd_mod 23428 3
ata_piix 15492 3
ata_generic 9092 0
libata 125720 2 ata_piix,ata_generic
scsi_mod 142348 4
sg,sr_mod,sd_mod,libata
generic 5124 0 [permanent]
b44 28044 0
mii 6528 1 b44
ehci_hcd 34188 0
uhci_hcd 25360 0
usbcore 134280 3 ehci_hcd,uhci_hcd
thermal 14856 0
processor 31048 2 acpi_cpufreq,thermal
fan 5636 0
fbcon 42656 0
tileblit 3584 1 fbcon
font 9216 1 fbcon
bitblit 6912 1 fbcon
softcursor 3200 1 bitblit
vesafb 9220 0
capability 5896 0
commoncap 8192 1 capability
rich@rich-laptop:~$
------------------------
rich@rich-laptop:~$ sudo ls -la /dev/snd/*
crw-rw---- 1 root audio 116, 6 2007-05-11 08:36
/dev/snd/controlC0
crw-rw---- 1 root audio 116, 5 2007-05-11 08:36
/dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 4 2007-05-11 08:36
/dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 3 2007-05-11 08:36
/dev/snd/seq
crw-rw---- 1 root audio 116, 2 2007-05-11 08:36
/dev/snd/timer
rich@rich-laptop:~$
------------------------
rich@rich-laptop:~$ sudo cat
/tmp/alsainfo/alsa-hda-intel.tmp
cat: /tmp/alsainfo/alsa-hda-intel.tmp: No such file or
directory
rich@rich-laptop:~$

--- Cesare Tirabassi
<email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Status: Open => Answered
>
> Cesare Tirabassi proposed the following answer:
> Thanks for your detailed report Rich. After having a
> look at it, I would
> kindly ask you for a couple of additional info:
>
> 1) the output od an lspci -v command
> 2) the output of an lsmod command
> 3) the output of an ls -la /dev/snd/* command
> 3) the output of a cat
> /tmp/alsainfo/alsa-hda-intel.tmp command
>
> I would also ask you to check in
> Menu->System->Preferences->Sound what
> is selected in the Sound Capture entry, what entries
> are available and
> if you tested them all.
>
> Can I assume that you have no other sound problem
> except this?
> Can I also assume that you checked this is not an
> hardware error (ie. everything works with another
> OS)?
>
>
_______________________________________________________________________
> If this answers your question, please go to the
> following page to let us
> know that it is solved:
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=8
>
> If you still need help, you can reply to this email
> or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/6414
>

____________________________________________________________________________________Got a little couch potato?
Check out fun summer activities for kids.
http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#12

>In System>Preferences>Sound Preferences I have the following Sound Capture options:
>
>STAC92xx Analog
>ALSA - Advanced Linux Sound Architecture
>OSS - Open Sound System
>Test Sound
>Silence

This is strange indeed, there are no capture devices explicitely listed.
All the rest seems ok, I need to investigate this further.

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#13

It is possible that the model is not detected correctly. Here is a list of possible modes applicable to your codec chip:

ref Reference board
3stack D945 3stack
5stack D945 5stack + SPDIF

I think you can try ref first and then one of the other two if ref doesn't work (I assume you have a Dell D945).

This needs to be added to the file /etc/modprobe.d/options as a new line:

options snd-hda-intel model=XXX

where XXX is one of ref, 3stack, 5stack.

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#14

Forgot to mention it, you need to restart after each modification.

Revision history for this message
RichPicker (rich-braden) said : 		#15

It is a Dell Inspiron 1300., Intel. does that make a
difference?

I don't fully understand how to add these to the
modprobe file, but I will do my best.

I bought a new microphone from Circuit City, and
tested it in the store, and it worked on the PC in the
store, but not on my laptop. So, the mic itself is
good.

I will edit the modprobe.

--- Cesare Tirabassi
<email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Cesare Tirabassi proposed the following answer:
> It is possible that the model is not detected
> correctly. Here is a list
> of possible modes applicable to your codec chip:
>
> ref Reference board
> 3stack D945 3stack
> 5stack D945 5stack + SPDIF
>
> I think you can try ref first and then one of the
> other two if ref
> doesn't work (I assume you have a Dell D945).
>
> This needs to be added to the file
> /etc/modprobe.d/options as a new
> line:
>
> options snd-hda-intel model=XXX
>
> where XXX is one of ref, 3stack, 5stack.
>
>
_______________________________________________________________________
> If this answers your question, please go to the
> following page to let us
> know that it is solved:
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=12
>
> If you still need help, you can reply to this email
> or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/6414
>

____________________________________________________________________________________Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.
http://smallbusiness.yahoo.com/webhosting

Revision history for this message
RichPicker (rich-braden) said : 		#16

That did it. THANK YOU THANK YOU.

I am soooo stupid. Instead of adding this:
options snd-hda-intel model=ref

I added this:
options snd-hda-intel model-ref

Just that ONE character off, and I caused you and
others your precious time.

Thank you for your help. Please forgive my lack of
ability.

Richard

--- Cesare Tirabassi
<email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Cesare Tirabassi proposed the following answer:
> It is possible that the model is not detected
> correctly. Here is a list
> of possible modes applicable to your codec chip:
>
> ref Reference board
> 3stack D945 3stack
> 5stack D945 5stack + SPDIF
>
> I think you can try ref first and then one of the
> other two if ref
> doesn't work (I assume you have a Dell D945).
>
> This needs to be added to the file
> /etc/modprobe.d/options as a new
> line:
>
> options snd-hda-intel model=XXX
>
> where XXX is one of ref, 3stack, 5stack.
>
>
_______________________________________________________________________
> If this answers your question, please go to the
> following page to let us
> know that it is solved:
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=12
>
> If you still need help, you can reply to this email
> or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/6414
>

____________________________________________________________________________________Yahoo! oneSearch: Finally, mobile search
that gives answers, not web links.
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC

Revision history for this message
RichPicker (rich-braden) said : 		#17

Please close the bug. Thank you for your help.

--- Cesare Tirabassi
<email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Cesare Tirabassi proposed the following answer:
> It is possible that the model is not detected
> correctly. Here is a list
> of possible modes applicable to your codec chip:
>
> ref Reference board
> 3stack D945 3stack
> 5stack D945 5stack + SPDIF
>
> I think you can try ref first and then one of the
> other two if ref
> doesn't work (I assume you have a Dell D945).
>
> This needs to be added to the file
> /etc/modprobe.d/options as a new
> line:
>
> options snd-hda-intel model=XXX
>
> where XXX is one of ref, 3stack, 5stack.
>
>
_______________________________________________________________________
> If this answers your question, please go to the
> following page to let us
> know that it is solved:
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=12
>
> If you still need help, you can reply to this email
> or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/6414
>

____________________________________________________________________________________
Expecting? Get great news right away with email Auto-Check.
Try the Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#18

Believe it or not, we can't close it.Only you have the powers to mark it solved ......

Revision history for this message
RichPicker (rich-braden) said : 		#19

Thanks Cesare Tirabassi, that solved my question.

Revision history for this message
Ressor (mrdetweiler) said : 		#20

I've had this same issue and tried adding the appropriate line to my /etc/modprobe.d/options but when I reboot and attempt to access the sound device with arecord -d5 -fcd -twav m.wav I see errors.

Below is some system info:

root@system-m:~# cd /proc/asound/
root@system-m:/proc/asound# ls
card0 cards devices I82801BAICH2 modules oss pcm seq timers version
root@system-m:/proc/asound# cat cards
 0 [I82801BAICH2 ]: ICH - Intel 82801BA-ICH2
                      Intel 82801BA-ICH2 with AD1881A at 0x1c00, irq 9
root@system-m:/proc/asound# cat devices
  2: : timer
  3: : sequencer
  4: [ 0- 1]: digital audio capture
  5: [ 0- 0]: digital audio playback
  6: [ 0- 0]: digital audio capture
  7: [ 0] : control
root@system-m:/proc/asound# cat I82801BAICH2
cat: I82801BAICH2: Is a directory
root@system-m:/proc/asound# ls I82801BAICH2
codec97#0 id intel8x0 oss_mixer pcm0c pcm0p pcm1c
root@system-m:/proc/asound# cat modules
 0 snd_intel8x0
root@system-m:/proc/asound# cat pcm
00-01: Intel ICH - MIC ADC : Intel 82801BA-ICH2 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801BA-ICH2 : playback 1 : capture 1
root@system-m:/proc/asound# cat version
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
root@system-m:/proc/asound# ls oss
devices sndstat
root@system-m:/proc/asound# cat oss/devices
  0: [0- 0]: mixer
  1: : sequencer
  3: [0- 0]: digital audio
  4: [0- 0]: digital audio
  8: : sequencer
 12: [0- 1]: digital audio
root@system-m:/proc/asound# cat oss/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.14rc1 emulation code)
Kernel: Linux system-m 2.6.20-15-server #2 SMP Sun Apr 15 07:41:34 UTC 2007 i686
Config options: 0

Installed drivers:
Type 10: ALSA emulation

Card config:
Intel 82801BA-ICH2 with AD1881A at 0x1c00, irq 9

Audio devices:
0: Intel 82801BA-ICH2 (DUPLEX)

Synth devices: NOT ENABLED IN CONFIG

Midi devices: NOT ENABLED IN CONFIG

Timers:
31: system timer

Mixers:
0: Analog Devices AD1881A

Revision history for this message
RichPicker (rich-braden) said : 		#21

I added the line to this file:
sudo cp /etc/modprobe.d/alsa-base

--- Ressor <email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Ressor posted a new comment:
> I've had this same issue and tried adding the
> appropriate line to my
> /etc/modprobe.d/options but when I reboot and
> attempt to access the
> sound device with arecord -d5 -fcd -twav m.wav I see
> errors.
>
> Below is some system info:
>
> root@system-m:~# cd /proc/asound/
> root@system-m:/proc/asound# ls
> card0 cards devices I82801BAICH2 modules oss
> pcm seq timers version
> root@system-m:/proc/asound# cat cards
> 0 [I82801BAICH2 ]: ICH - Intel 82801BA-ICH2
> Intel 82801BA-ICH2 with
> AD1881A at 0x1c00, irq 9
> root@system-m:/proc/asound# cat devices
> 2: : timer
> 3: : sequencer
> 4: [ 0- 1]: digital audio capture
> 5: [ 0- 0]: digital audio playback
> 6: [ 0- 0]: digital audio capture
> 7: [ 0] : control
> root@system-m:/proc/asound# cat I82801BAICH2
> cat: I82801BAICH2: Is a directory
> root@system-m:/proc/asound# ls I82801BAICH2
> codec97#0 id intel8x0 oss_mixer pcm0c pcm0p
> pcm1c
> root@system-m:/proc/asound# cat modules
> 0 snd_intel8x0
> root@system-m:/proc/asound# cat pcm
> 00-01: Intel ICH - MIC ADC : Intel 82801BA-ICH2 -
> MIC ADC : capture 1
> 00-00: Intel ICH : Intel 82801BA-ICH2 : playback 1 :
> capture 1
> root@system-m:/proc/asound# cat version
> Advanced Linux Sound Architecture Driver Version
> 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
> root@system-m:/proc/asound# ls oss
> devices sndstat
> root@system-m:/proc/asound# cat oss/devices
> 0: [0- 0]: mixer
> 1: : sequencer
> 3: [0- 0]: digital audio
> 4: [0- 0]: digital audio
> 8: : sequencer
> 12: [0- 1]: digital audio
> root@system-m:/proc/asound# cat oss/sndstat
> Sound Driver:3.8.1a-980706 (ALSA v1.0.14rc1
> emulation code)
> Kernel: Linux system-m 2.6.20-15-server #2 SMP Sun
> Apr 15 07:41:34 UTC 2007 i686
> Config options: 0
>
> Installed drivers:
> Type 10: ALSA emulation
>
> Card config:
> Intel 82801BA-ICH2 with AD1881A at 0x1c00, irq 9
>
> Audio devices:
> 0: Intel 82801BA-ICH2 (DUPLEX)
>
> Synth devices: NOT ENABLED IN CONFIG
>
> Midi devices: NOT ENABLED IN CONFIG
>
> Timers:
> 31: system timer
>
> Mixers:
> 0: Analog Devices AD1881A
>

____________________________________________________________________________________
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and hotel bargains.
http://farechase.yahoo.com/promo-generic-14795097

Revision history for this message
Ressor (mrdetweiler) said : 		#22

I've actually tried both and it seems that it causes errors no matter where I put the line.

options snd_intel8x0 model-ref

Revision history for this message
RichPicker (rich-braden) said : 		#23

I don't know any more. I'm still learning, too. One of
the developers should be able to help more than me.

--- Ressor <email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Ressor posted a new comment:
> I've actually tried both and it seems that it causes
> errors no matter
> where I put the line.
>
> options snd_intel8x0 model-ref
>

____________________________________________________________________________________Yahoo! oneSearch: Finally, mobile search
that gives answers, not web links.
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC

Revision history for this message
[euchrid] (euchrid) said : 		#24

Updating the Alsa driver worked for me.

I put more information and instructions here: http://ubuntuforums.org/showthread.php?p=2798055#post2798055

Revision history for this message
RichPicker (rich-braden) said : 		#25

Sorry to bother you again. After re-installing Feisty yesterday, and rebuilding my system I can NOT get the mic to work again.

I have added the correct line of text to /etc/modprobe.d/alsa-base
I have configured System>Preferences>Sound
But no mic. And Audacity locks up when I try to record.

One thing I notice that's not right is Volume Control has only one tab - the Playback tab.
It should have Playback, Capture, Switches, and Record.

I downloaded a driver from the Alsa site. It's a folder on my desktop, but I don't know how to install it from the desktop, or with the Archive Manager.
So, I followed the steps here: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/88570/comments/19
But I get this in the terminal when I enter the ./configure command

rich@rich-laptop:~/alsa-driver-1.0.14rc4$ ./configure
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
rich@rich-laptop:~/alsa-driver-1.0.14rc4$

I will send the config.log if you wish. To me it seems to say the same thing "cannot create executables"

Thanks again for your help.

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#26

Wouldn't be better to open a new question instead of adding to an old one?

Have a look at this on how to install the drivers from ALSA:

https://help.ubuntu.com/community/HdaIntelSoundHowto

Revision history for this message
RichPicker (rich-braden) said : 		#27

I'm trying to hide it at the bottom of an existing
question, because I'm embarrassed that I'm so totally
stupid with this.

I don't know how to download it to a directory (eg.
~/downloads). When I click the link I get 2 choices,
Open with Archive Mangager, and Save to Disc. I don't
know what to do with it in Archive Manager, and when
it saves to disc it puts it on the desktop.

The instructions are simple, but I lack so much basic
understanding I get lost quickly,.

--- Cesare Tirabassi
<email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Status: Open => Answered
>
> Cesare Tirabassi proposed the following answer:
> Wouldn't be better to open a new question instead of
> adding to an old
> one?
>
> Have a look at this on how to install the drivers
> from ALSA:
>
> https://help.ubuntu.com/community/HdaIntelSoundHowto
>
>
_______________________________________________________________________
> If this answers your question, please go to the
> following page to let us
> know that it is solved:
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=25
>
> If you still need help, you can reply to this email
> or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/6414
>

      ____________________________________________________________________________________
Luggage? GPS? Comic books?
Check out fitting gifts for grads at Yahoo! Search
http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz

Revision history for this message
Best Cesare Tirabassi (norsetto) said : 		#28

If it saves to Desktop use ~/Desktop instead of ~/downloads

Revision history for this message
RichPicker (rich-braden) said : 		#29

It gives the same error:

rich@rich-laptop:/usr/src/alsa/alsa-driver-1.0.14rc4$
sudo ./configure --with-cards=hda-intel
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
rich@rich-laptop:/usr/src/alsa/alsa-driver-1.0.14rc4$

I'll start a new question.

--- Cesare Tirabassi
<email address hidden> wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Status: Open => Answered
>
> Cesare Tirabassi proposed the following answer:
> If it saves to Desktop use ~/Desktop instead of
> ~/downloads
>
>
_______________________________________________________________________
> If this answers your question, please go to the
> following page to let us
> know that it is solved:
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=27
>
> If you still need help, you can reply to this email
> or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/6414
>

____________________________________________________________________________________
Get the free Yahoo! toolbar and rest assured with the added security of spyware protection.
http://new.toolbar.yahoo.com/toolbar/features/norton/index.php

Revision history for this message
RichPicker (rich-braden) said : 		#30

It worked. I left out the first 2 steps. Thanks for
your help.

--- RichPicker <email address hidden>
wrote:

> Your question #6414 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/6414
>
> Status: Answered => Open
>
> You are still having a problem:
> It gives the same error:
>
>
rich@rich-laptop:/usr/src/alsa/alsa-driver-1.0.14rc4$
> sudo ./configure --with-cards=hda-intel
> checking for gcc... gcc
> checking for C compiler default output file name...
> configure: error: C compiler cannot create
> executables
> See `config.log' for more details.
>
rich@rich-laptop:/usr/src/alsa/alsa-driver-1.0.14rc4$
>
>
> I'll start a new question.
>
>
> --- Cesare Tirabassi
> <email address hidden> wrote:
>
> > Your question #6414 on Ubuntu changed:
> >
> https://answers.launchpad.net/ubuntu/+question/6414
> >
> > Status: Open => Answered
> >
> > Cesare Tirabassi proposed the following answer:
> > If it saves to Desktop use ~/Desktop instead of
> > ~/downloads
> >
> >
>
_______________________________________________________________________
> > If this answers your question, please go to the
> > following page to let us
> > know that it is solved:
> >
>
https://answers.launchpad.net/ubuntu/+question/6414/+confirm?answer_id=27
> >
> > If you still need help, you can reply to this
> email
> > or go to the
> > following page to enter your feedback:
> >
> https://answers.launchpad.net/ubuntu/+question/6414
> >
>
>
>
>
____________________________________________________________________________________
> Get the free Yahoo! toolbar and rest assured with
> the added security of spyware protection.
>
http://new.toolbar.yahoo.com/toolbar/features/norton/index.php
>

____________________________________________________________________________________
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
http://games.yahoo.com/games/front

Revision history for this message
RichPicker (rich-braden) said : 		#31

Thanks Cesare Tirabassi, that solved my question.