499: old priorty 0, new priorty -20

I can confirm a similar problem with an update Edge->Feisty on a Dell M90. I can somewhat provoke the issue by scrolling the window in firefox using either the keyboard or mouse scrollbutton. The firefox-screen gets covered in green and black stripes and all consoles get the following message:

Message from syslogd@Adventure at Mon Apr 30 15:14:46 2007 ...
Adventure kernel: [11832.996000] Uhhuh. NMI received for unknown reason b1 on CPU 0.

Message from syslogd@Adventure at Mon Apr 30 15:14:46 2007 ...
Adventure kernel: [11832.996000] You have some hardware problem, likely on the PCI bus.

Message from syslogd@Adventure at Mon Apr 30 15:14:46 2007 ...
Adventure kernel: [11832.996000] Dazed and confused, but trying to continue

Usually there aren't much more to it, but sometimes the wifi-network dies (impossible to remove the associated modules) and more often than convenient the screen locks up everything but the mouse. No keyboard combinations seems to work. I run gnome+beryl and beside the strange scrolling behavior and dying wifi-network everything runs very smooth, even games like Day of defeat.

This is my dmesg:

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007fd87c00 end: 000000007fe87c00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fe87c00 size: 0000000000178400 end: 0000000080000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004007000 end: 00000000f4007000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f4008000 size: 0000000000004000 end: 00000000f400c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe87c00 (usable)
[ 0.000000] BIOS-e820: 000000007fe87c00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 523911) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523911
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523911
[ 0.000000] On node 0 totalpages: 523911
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 292234 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc090
[ 0.000000] ACPI: RSDT (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x7fe8818a
[ 0.000000] ACPI: FADT (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x7fe89000
[ 0.000000] ACPI: HPET (v001 DELL M07 0x00000001 ASL 0x00000061) @ 0x7fe89700
[ 0.000000] ACPI: MADT (v001 DELL M07 0x27d60c12 ASL 0x00000047) @ 0x7fe89800
[ 0.000000] ACPI: ASF! (v016 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x7fe89400
[ 0.000000] ACPI: MCFG (v016 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x7fe897c0
[ 0.000000] ACPI: SLIC (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x7fe8989c
[ 0.000000] ACPI: TCPA (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x7fe89b00
[ 0.000000] >>> ERROR: Invalid checksum
[ 0.000000] ACPI: BOOT (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x7fe893c0
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe88215
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] Detected 1995.042 MHz processor.
[ 9.618029] Built 1 zonelists. Total pages: 519818
[ 9.618035] Kernel command line: root=UUID=b01fa7fb-9fbc-46f3-bd9b-eb35aa05d3cf ro quiet splash
[ 9.618271] mapped APIC to ffffd000 (fee00000)
[ 9.618275] mapped IOAPIC to ffffc000 (fec00000)
[ 9.618279] Enabling fast FPU save and restore... done.
[ 9.618283] Enabling unmasked SIMD FPU exception support... done.
[ 9.618293] Initializing CPU#0
[ 9.618366] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 9.620898] Console: colour VGA+ 80x25
[ 9.621229] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.621665] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.729346] Memory: 2066656k/2095644k available (1992k kernel code, 27680k reserved, 893k data, 328k init, 1178140k highmem)
[ 9.729360] virtual kernel memory layout:
[ 9.729362] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 9.729364] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.729365] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.729367] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.729369] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 9.729371] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 9.729373] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 9.729378] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.729589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 9.729597] hpet0: 3 64-bit timers, 14318180 Hz
[ 9.730603] Using HPET for base-timer
[ 9.809549] Calibrating delay using timer specific routine.. 3995.00 BogoMIPS (lpj=7990010)
[ 9.809608] Security Framework v1.0.0 initialized
[ 9.809616] SELinux: Disabled at boot.
[ 9.809639] Mount-cache hash table entries: 512
[ 9.809833] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 9.809844] monitor/mwait feature present.
[ 9.809847] using mwait in idle threads.
[ 9.809854] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 9.809858] CPU: L2 cache: 4096K
[ 9.809862] CPU: Physical Processor ID: 0
[ 9.809864] CPU: Processor Core ID: 0
[ 9.809867] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 9.809882] Compat vDSO mapped to ffffe000.
[ 9.809887] Remapping vsyscall page to ffffe000
[ 9.809905] Checking 'hlt' instruction... OK.
[ 9.825686] SMP alternatives: switching to UP code
[ 9.826204] Early unpacking initramfs... done
[ 10.353290] ACPI: Core revision 20060707
[ 10.369767] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 10.373842] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 10.373867] SMP alternatives: switching to SMP code
[ 10.373955] Booting processor 1/1 eip 3000
[ 12.326913] Initializing CPU#1
[ 12.404504] Calibrating delay using timer specific routine.. 3990.16 BogoMIPS (lpj=7980326)
[ 12.404514] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 12.404522] monitor/mwait feature present.
[ 12.404527] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 12.404530] CPU: L2 cache: 4096K
[ 12.404533] CPU: Physical Processor ID: 0
[ 12.404535] CPU: Processor Core ID: 1
[ 12.404538] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 10.466341] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 10.466371] Total of 2 processors activated (7985.16 BogoMIPS).
[ 10.466574] ENABLING IO-APIC IRQs
[ 10.466790] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.613105] checking TSC synchronization across 2 CPUs:
[ 0.000003] CPU#0 had -970193 usecs TSC skew, fixed it up.
[ 0.000006] CPU#1 had 970193 usecs TSC skew, fixed it up.
[ 0.004002] Brought up 2 CPUs
[ 0.094362] migration_cost=42
[ 0.094750] Booting paravirtualized kernel on bare hardware
[ 0.094862] Time: 9:57:34 Date: 03/30/107
[ 0.094903] NET: Registered protocol family 16
[ 0.095019] EISA bus registered
[ 0.095026] ACPI: bus type pci registered
[ 0.123610] PCI: PCI BIOS revision 2.10 entry at 0xfaed6, last bus=14
[ 0.123613] PCI: Using configuration type 1
[ 0.123616] Setting up standard PCI resources
[ 0.164539] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ LMPWR] OemTableId [ DELLLOM] [20060707]
[ 0.164673] ACPI: Interpreter enabled
[ 0.164676] ACPI: Using IOAPIC for interrupt routing
[ 0.166208] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.166223] PCI: Probing PCI hardware (bus 00)
[ 0.166550] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.188341] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.188348] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.188671] Boot video device is 0000:01:00.0
[ 0.190238] PCI: Transparent bridge - 0000:00:1e.0
[ 0.190369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.265310] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
[ 0.265742] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[ 0.266169] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[ 0.266604] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 0.267033] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.267463] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.267905] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.268342] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.269096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.270370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.271696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.272108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.272504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
[ 0.272803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.273532] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.273550] pnp: PnP ACPI init
[ 0.342244] pnp: PnP ACPI: found 13 devices
[ 0.342250] PnPBIOS: Disabled by ACPI PNP
[ 0.342318] PCI: Using ACPI for IRQ routing
[ 0.342322] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.410634] NET: Registered protocol family 8
[ 0.410637] NET: Registered protocol family 20
[ 0.441287] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.441293] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[ 0.441298] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[ 0.441307] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.441311] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 0.441316] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 0.441320] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 0.441324] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.441329] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.441341] pnp: 00:08: ioport range 0xc80-0xcaf has been reserved
[ 0.441345] pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved
[ 0.441349] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 0.441353] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 0.441357] pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
[ 0.441361] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[ 0.441376] pnp: 00:0c: ioport range 0xcb0-0xcbb has been reserved
[ 0.441844] PCI: Bridge: 0000:00:01.0
[ 0.441849] IO window: e000-efff
[ 0.441855] MEM window: ed000000-efefffff
[ 0.441861] PREFETCH window: d0000000-dfffffff
[ 0.441867] PCI: Bridge: 0000:00:1c.0
[ 0.441869] IO window: disabled.
[ 0.441876] MEM window: disabled.
[ 0.441882] PREFETCH window: disabled.
[ 0.441890] PCI: Bridge: 0000:00:1c.1
[ 0.441892] IO window: disabled.
[ 0.441900] MEM window: ecf00000-ecffffff
[ 0.441906] PREFETCH window: disabled.
[ 0.441914] PCI: Bridge: 0000:00:1c.2
[ 0.441916] IO window: disabled.
[ 0.441924] MEM window: ece00000-ecefffff
[ 0.441930] PREFETCH window: disabled.
[ 0.441937] PCI: Bridge: 0000:00:1c.3
[ 0.441942] IO window: d000-dfff
[ 0.441950] MEM window: ecc00000-ecdfffff
[ 0.441957] PREFETCH window: e0000000-e01fffff
[ 0.441965] PCI: Bridge: 0000:00:1e.0
[ 0.441968] IO window: disabled.
[ 0.441976] MEM window: ecb00000-ecbfffff
[ 0.441982] PREFETCH window: disabled.
[ 0.442005] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.442013] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.442042] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.442051] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.442082] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.442090] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.442121] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.442129] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.442160] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.442168] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.442187] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.442227] NET: Registered protocol family 2
[ 0.487787] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.487916] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.488565] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.488892] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.488896] TCP reno registered
[ 0.503888] checking if image is initramfs... it is
[ 1.546316] Freeing initrd memory: 6750k freed
[ 1.546561] Simple Boot Flag at 0x79 set to 0x1
[ 1.547260] audit: initializing netlink socket (disabled)
[ 1.547281] audit(1177927055.512:1): initialized
[ 1.547428] highmem bounce pool size: 64 pages
[ 1.547555] VFS: Disk quotas dquot_6.5.1
[ 1.547581] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.547652] io scheduler noop registered
[ 1.547656] io scheduler anticipatory registered
[ 1.547660] io scheduler deadline registered
[ 1.547677] io scheduler cfq registered (default)
[ 1.548014] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.548073] assign_interrupt_mode Found MSI capability
[ 1.548077] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.548219] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.548292] assign_interrupt_mode Found MSI capability
[ 1.548296] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.548352] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.548519] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.548592] assign_interrupt_mode Found MSI capability
[ 1.548596] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.548648] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.548810] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.548883] assign_interrupt_mode Found MSI capability
[ 1.548887] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.548937] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.549100] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.549172] assign_interrupt_mode Found MSI capability
[ 1.549176] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.549231] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.549486] isapnp: Scanning for PnP cards...
[ 1.904264] isapnp: No Plug & Play device found
[ 1.937468] Real Time Clock Driver v1.12ac
[ 1.937557] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.938471] mice: PS/2 mouse device common for all mice
[ 1.939337] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.939653] input: Macintosh mouse button emulation as /class/input/input0
[ 1.939706] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.939711] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.940016] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.943928] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.943934] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.944105] EISA: Probing bus 0 at eisa.0
[ 1.944111] EISA: Cannot allocate resource for mainboard
[ 1.944115] Cannot allocate resource for EISA slot 1
[ 1.944155] EISA: Detected 0 cards.
[ 1.974261] TCP cubic registered
[ 1.974273] NET: Registered protocol family 1
[ 1.974303] Starting balanced_irq
[ 1.974313] Using IPI No-Shortcut mode
[ 1.974429] ACPI: (supports S0 S3 S4 S5)
[ 1.974454] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.974496] Magic number: 3:637:981
[ 1.974506] hash matches device ttyc8
[ 1.974758] Freeing unused kernel memory: 328k freed
[ 1.977665] Time: tsc clocksource has been installed.
[ 3.309645] Capability LSM initialized
[ 3.373427] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 3.373734] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 3.374081] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.374089] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.374853] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 3.375139] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 3.375559] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.375567] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.160000] ACPI: Thermal Zone [THM] (25 C)
[ 4.168000] Time: hpet clocksource has been installed.
[ 4.704000] SCSI subsystem initialized
[ 4.712000] usbcore: registered new interface driver usbfs
[ 4.712000] usbcore: registered new interface driver hub
[ 4.712000] usbcore: registered new device driver usb
[ 4.712000] USB Universal Host Controller Interface driver v3.0
[ 4.712000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 4.712000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.712000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.712000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.712000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[ 4.712000] usb usb1: configuration #1 chosen from 1 choice
[ 4.712000] hub 1-0:1.0: USB hub found
[ 4.712000] hub 1-0:1.0: 2 ports detected
[ 4.712000] libata version 2.20 loaded.
[ 4.816000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 4.816000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4.816000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.816000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 4.816000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[ 4.816000] usb usb2: configuration #1 chosen from 1 choice
[ 4.816000] hub 2-0:1.0: USB hub found
[ 4.816000] hub 2-0:1.0: 2 ports detected
[ 4.884000] ieee1394: Initialized config rom entry `ip1394'
[ 4.920000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 4.920000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4.920000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.920000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 4.920000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[ 4.920000] usb usb3: configuration #1 chosen from 1 choice
[ 4.920000] hub 3-0:1.0: USB hub found
[ 4.920000] hub 3-0:1.0: 2 ports detected
[ 5.024000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 5.024000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 5.024000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.024000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 5.024000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[ 5.024000] usb usb4: configuration #1 chosen from 1 choice
[ 5.024000] hub 4-0:1.0: USB hub found
[ 5.024000] hub 4-0:1.0: 2 ports detected
[ 5.056000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 5.128000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 5.128000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.128000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.128000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 5.128000] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.128000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 5.128000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[ 5.132000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.132000] usb usb5: configuration #1 chosen from 1 choice
[ 5.132000] hub 5-0:1.0: USB hub found
[ 5.132000] hub 5-0:1.0: 8 ports detected
[ 5.236000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 5.292000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ecbff800-ecbfffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 5.296000] tg3.c:v3.72 (January 8, 2007)
[ 5.296000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 5.296000] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 5.316000] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:c2:2a:96
[ 5.316000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 5.316000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 5.316000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 5.316000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 5.316000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.316000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.316000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 5.316000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 5.316000] scsi0 : ata_piix
[ 5.480000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
[ 5.480000] ata1.00: ATA-7: Hitachi HTS721010G9SA00, MCZOC10H, max UDMA/100
[ 5.480000] ata1.00: 195371568 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 5.488000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
[ 5.488000] ata1.00: configured for UDMA/100
[ 5.488000] scsi1 : ata_piix
[ 5.580000] usb 1-1: device not accepting address 2, error -71
[ 5.824000] ata2.00: ATAPI, max UDMA/33
[ 6.012000] ata2.00: configured for UDMA/33
[ 6.012000] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72101 MCZO PQ: 0 ANSI: 5
[ 6.028000] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5
[ 6.040000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 6.040000] sda: Write Protect is off
[ 6.040000] sda: Mode Sense: 00 3a 00 00
[ 6.040000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.040000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 6.040000] sda: Write Protect is off
[ 6.040000] sda: Mode Sense: 00 3a 00 00
[ 6.040000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.040000] sda:<6>usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 6.064000] sda1 sda2 < sda5 >
[ 6.088000] sd 0:0:0:0: Attached scsi disk sda
[ 6.108000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.108000] Uniform CD-ROM driver Revision: 3.20
[ 6.108000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.112000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.112000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.220000] usb 1-1: configuration #1 chosen from 1 choice
[ 6.220000] hub 1-1:1.0: USB hub found
[ 6.224000] hub 1-1:1.0: 4 ports detected
[ 6.328000] Attempting manual resume
[ 6.328000] swsusp: Resume From Partition 8:5
[ 6.328000] PM: Checking swsusp image.
[ 6.328000] PM: Resume from disk failed.
[ 6.368000] kjournald starting. Commit interval 5 seconds
[ 6.368000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.552000] usb 1-1.2: new full speed USB device using uhci_hcd and address 5
[ 6.568000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[444fc0001b98e850]
[ 6.664000] usb 1-1.2: configuration #1 chosen from 1 choice
[ 6.668000] hub 1-1.2:1.0: USB hub found
[ 6.668000] hub 1-1.2:1.0: 3 ports detected
[ 6.980000] usb 1-1.2.2: new full speed USB device using uhci_hcd and address 6
[ 7.100000] usb 1-1.2.2: configuration #1 chosen from 1 choice
[ 17.912000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.984000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.320000] Linux agpgart interface v0.102 (c) Dave Jones
[ 18.324000] agpgart: Detected an Intel 945GM Chipset.
[ 18.348000] agpgart: AGP aperture is 256M @ 0x0
[ 18.404000] input: PC Speaker as /class/input/input2
[ 18.860000] iTCO_vendor_support: vendor-support=0
[ 18.864000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 18.940000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa44713/0x200000
[ 18.980000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 18.984000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 18.984000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.012000] intel_rng: FWH not detected
[ 19.072000] nvidia: module license 'NVIDIA' taints kernel.
[ 19.328000] ieee80211_crypt: registered algorithm 'NULL'
[ 19.328000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.328000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 19.328000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 19.360000] sdhci: Secure Digital Host Controller Interface driver
[ 19.360000] sdhci: Copyright(c) Pierre Ossman
[ 19.360000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[ 19.360000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
[ 19.360000] mmc0: SDHCI at 0xecbff400 irq 18 DMA
[ 19.452000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.452000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 19.544000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[ 19.544000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 19.556000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.556000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 19.556000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 19.572000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 19.572000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 20.396000] lp: driver loaded but no devices found
[ 20.464000] Adding 3984080k swap on /dev/disk/by-uuid/414c2f40-e01d-4081-9e2f-7374f0ea8f39. Priority:-1 extents:1 across:3984080k
[ 20.536000] EXT3 FS on sda1, internal journal
[ 21.416000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 22.244000] NET: Registered protocol family 17
[ 25.672000] ACPI: AC Adapter [AC] (on-line)
[ 25.784000] ACPI: Battery Slot [BAT0] (battery present)
[ 25.812000] input: Lid Switch as /class/input/input4
[ 25.812000] ACPI: Lid Switch [LID]
[ 25.812000] input: Power Button (CM) as /class/input/input5
[ 25.812000] ACPI: Power Button (CM) [PBTN]
[ 25.840000] input: Sleep Button (CM) as /class/input/input6
[ 25.840000] ACPI: Sleep Button (CM) [SBTN]
[ 25.912000] Using specific hotkey driver
[ 25.964000] ACPI: ACPI Dock Station Driver
[ 26.032000] ibm_acpi: ec object not found
[ 26.172000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 26.208000] pcc_acpi: loading...
[ 29.380000] PM: Writing back config space on device 0000:09:00.0 at offset c (was 531e0000, writing 0)
[ 31.072000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 31.252000] usb 3-2: configuration #1 chosen from 1 choice
[ 31.380000] usbcore: registered new interface driver hiddev
[ 31.396000] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input7
[ 31.396000] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2
[ 31.396000] usbcore: registered new interface driver usbhid
[ 31.396000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 32.452000] ppdev: user-space parallel port driver
[ 33.292000] apm: BIOS not found.
[ 35.056000] Bluetooth: Core ver 2.11
[ 35.056000] NET: Registered protocol family 31
[ 35.056000] Bluetooth: HCI device and connection manager initialized
[ 35.056000] Bluetooth: HCI socket layer initialized
[ 35.080000] Bluetooth: L2CAP ver 2.8
[ 35.080000] Bluetooth: L2CAP socket layer initialized
[ 35.352000] Bluetooth: RFCOMM socket layer initialized
[ 35.352000] Bluetooth: RFCOMM TTY layer initialized
[ 35.352000] Bluetooth: RFCOMM ver 1.8
[ 65.048000] NET: Registered protocol family 10
[ 65.048000] lo: Disabled Privacy Extensions
[ 65.048000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.048000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 133.192000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 137.164000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 147.636000] eth1: no IPv6 routers present
[11832.996000] Uhhuh. NMI received for unknown reason b1 on CPU 0.
[11832.996000] You have some hardware problem, likely on the PCI bus.
[11832.996000] Dazed and confused, but trying to continue

Hi!
for me, I noticed the error message just at start up. Anyway, I realized I don't get the message always. Sometimes, usually after the computer has been turned off for a while, the boot up happen without any problem. I thought it may help to have the dmseg of a no-error boot up.
Thanks

sorry! Here is the dmesg of a boot up without error messages

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fed3800 end: 000000003ffd3800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffd3800 size: 000000000002c800 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010007000 end: 00000000f0007000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 00000000000f0000 end: 00000000fee10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd3800 (usable)
[ 0.000000] BIOS-e820: 000000003ffd3800 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262099) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262099
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262099
[ 0.000000] On node 0 totalpages: 262099
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32468 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc9b0
[ 0.000000] ACPI: RSDT (v001 DELL CPi R 0x27d5061b ASL 0x00000061) @ 0x3ffd3fd3
[ 0.000000] ACPI: FADT (v001 DELL CPi R 0x27d5061b ASL 0x00000061) @ 0x3ffd4c00
[ 0.000000] ACPI: MADT (v001 DELL CPi R 0x27d5061b ASL 0x00000047) @ 0x3ffd5400
[ 0.000000] ACPI: MCFG (v016 DELL CPi R 0x27d5061b ASL 0x00000061) @ 0x3ffd53c0
[ 0.000000] ACPI: BOOT (v001 DELL CPi R 0x27d5061b ASL 0x00000061) @ 0x3ffd4fc0
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3ffd43e6
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3ffd420e
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x3ffd4013
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1995.145 MHz processor.
[ 5.346281] Built 1 zonelists. Total pages: 260052
[ 5.346285] Kernel command line: root=UUID=b40eb942-e70e-43c9-bf70-a073b78fc4a0 ro quiet splash noapic
[ 5.346427] Found and enabled local APIC!
[ 5.346429] mapped APIC to ffffd000 (fee00000)
[ 5.346432] Enabling fast FPU save and restore... done.
[ 5.346435] Enabling unmasked SIMD FPU exception support... done.
[ 5.346443] Initializing CPU#0
[ 5.346516] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 5.347720] Console: colour VGA+ 80x25
[ 5.348036] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 5.348415] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 5.374601] Memory: 1027948k/1048396k available (1992k kernel code, 19696k reserved, 893k data, 328k init, 130892k highmem)
[ 5.374609] virtual kernel memory layout:
[ 5.374610] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 5.374611] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 5.374612] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 5.374613] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 5.374614] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 5.374616] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 5.374617] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 5.374620] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 5.454469] Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988287)
[ 5.454504] Security Framework v1.0.0 initialized
[ 5.454511] SELinux: Disabled at boot.
[ 5.454525] Mount-cache hash table entries: 512
[ 5.454641] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[ 5.454651] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 5.454653] CPU: L2 cache: 2048K
[ 5.454655] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
[ 5.454663] Compat vDSO mapped to ffffe000.
[ 5.454667] Remapping vsyscall page to ffffe000
[ 5.454676] Checking 'hlt' instruction... OK.
[ 5.470537] SMP alternatives: switching to UP code
[ 5.470693] Freeing SMP alternatives: 11k freed
[ 5.470841] Early unpacking initramfs... done
[ 5.758110] ACPI: Core revision 20060707
[ 5.766626] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 5.767873] ACPI: setting ELCR to 0200 (from 0e80)
[ 5.769881] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
[ 5.769904] Total of 1 processors activated (3994.14 BogoMIPS).
[ 5.874303] Brought up 1 CPUs
[ 5.874500] Booting paravirtualized kernel on bare hardware
[ 5.874568] Time: 0:33:09 Date: 04/01/107
[ 5.874593] NET: Registered protocol family 16
[ 5.874661] EISA bus registered
[ 5.874665] ACPI: bus type pci registered
[ 5.912237] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
[ 5.912239] PCI: Using configuration type 1
[ 5.912240] Setting up standard PCI resources
[ 5.928176] ACPI: Interpreter enabled
[ 5.928178] ACPI: Using PIC for interrupt routing
[ 5.929347] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 5.929354] PCI: Probing PCI hardware (bus 00)
[ 5.929424] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 5.940636] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 5.940640] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 5.940827] Boot video device is 0000:01:00.0
[ 5.941242] PCI: Transparent bridge - 0000:00:1e.0
[ 5.941298] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
[ 5.941301] Please report the result to linux-kernel to fix this permanently
[ 5.941327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 5.957870] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 5.958074] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 5.958288] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 5.958492] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[ 5.958684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 5.958879] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 5.959077] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 5.959413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 5.960324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 5.960711] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 5.960718] pnp: PnP ACPI init
[ 5.985579] pnp: PnP ACPI: found 11 devices
[ 5.985583] PnPBIOS: Disabled by ACPI PNP
[ 5.985616] PCI: Using ACPI for IRQ routing
[ 5.985618] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 6.011498] NET: Registered protocol family 8
[ 6.011499] NET: Registered protocol family 20
[ 6.024829] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 6.024832] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[ 6.024835] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[ 6.024839] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 6.024842] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 6.024844] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 6.024846] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 6.024849] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 6.024851] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 6.024856] pnp: 00:08: ioport range 0x900-0x90f has been reserved
[ 6.024858] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 6.024860] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 6.024863] pnp: 00:08: ioport range 0x930-0x93f has been reserved
[ 6.024865] pnp: 00:08: ioport range 0x940-0x97f has been reserved
[ 6.025071] PCI: Bridge: 0000:00:01.0
[ 6.025074] IO window: d000-dfff
[ 6.025077] MEM window: dfd00000-dfefffff
[ 6.025080] PREFETCH window: d0000000-d7ffffff
[ 6.025088] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 6.025090] IO window: 00002000-000020ff
[ 6.025094] IO window: 00002400-000024ff
[ 6.025099] PREFETCH window: 50000000-53ffffff
[ 6.025103] MEM window: 54000000-57ffffff
[ 6.025107] PCI: Bridge: 0000:00:1e.0
[ 6.025110] IO window: 2000-2fff
[ 6.025115] MEM window: dfc00000-dfcfffff
[ 6.025120] PREFETCH window: 50000000-53ffffff
[ 6.025277] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 6.025280] PCI: setting IRQ 11 as level-triggered
[ 6.025284] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 6.025290] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 6.025301] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 6.025316] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[ 6.025455] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
[ 6.025457] PCI: setting IRQ 7 as level-triggered
[ 6.025461] ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[ 6.025483] NET: Registered protocol family 2
[ 6.062214] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 6.062302] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 6.063005] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 6.063461] TCP: Hash tables configured (established 131072 bind 65536)
[ 6.063464] TCP reno registered
[ 6.074292] checking if image is initramfs... it is
[ 6.642404] Freeing initrd memory: 7008k freed
[ 6.642613] Simple Boot Flag at 0x79 set to 0x1
[ 6.642798] audit: initializing netlink socket (disabled)
[ 6.642812] audit(1177979589.380:1): initialized
[ 6.642877] highmem bounce pool size: 64 pages
[ 6.642933] VFS: Disk quotas dquot_6.5.1
[ 6.642952] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 6.642999] io scheduler noop registered
[ 6.643002] io scheduler anticipatory registered
[ 6.643003] io scheduler deadline registered
[ 6.643012] io scheduler cfq registered (default)
[ 6.643249] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 6.643276] assign_interrupt_mode Found MSI capability
[ 6.643279] Allocate Port Service[0000:00:01.0:pcie00]
[ 6.643392] isapnp: Scanning for PnP cards...
[ 6.998139] isapnp: No Plug & Play device found
[ 7.020316] Real Time Clock Driver v1.12ac
[ 7.020367] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 7.021127] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 7.021131] PCI: setting IRQ 5 as level-triggered
[ 7.021136] ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 7.021145] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 7.021224] mice: PS/2 mouse device common for all mice
[ 7.021704] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 7.021891] input: Macintosh mouse button emulation as /class/input/input0
[ 7.021918] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 7.021921] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 7.022129] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 7.027579] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.027584] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.027738] EISA: Probing bus 0 at eisa.0
[ 7.027746] Cannot allocate resource for EISA slot 1
[ 7.027748] Cannot allocate resource for EISA slot 2
[ 7.027771] EISA: Detected 0 cards.
[ 7.057846] TCP cubic registered
[ 7.057854] NET: Registered protocol family 1
[ 7.057901] Testing NMI watchdog ... OK.
[ 7.097607] Using IPI No-Shortcut mode
[ 7.097656] Time: tsc clocksource has been installed.
[ 7.097667] ACPI: (supports S0 S3 S4 S5)
[ 7.097705] Magic number: 7:93:556
[ 7.097758] hash matches device ptya2
[ 7.097976] Freeing unused kernel memory: 328k freed
[ 7.099078] input: AT Translated Set 2 keyboard as /class/input/input1
[ 8.281783] Capability LSM initialized
[ 8.310053] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 8.310059] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 8.310065] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 8.314295] ACPI: Thermal Zone [THM] (38 C)
[ 8.591783] usbcore: registered new interface driver usbfs
[ 8.591803] usbcore: registered new interface driver hub
[ 8.591818] usbcore: registered new device driver usb
[ 8.592481] USB Universal Host Controller Interface driver v3.0
[ 8.592522] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 8.592534] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 8.592537] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.592667] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 8.592695] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 8.592781] usb usb1: configuration #1 chosen from 1 choice
[ 8.592803] hub 1-0:1.0: USB hub found
[ 8.592807] hub 1-0:1.0: 2 ports detected
[ 8.669020] ieee1394: Initialized config rom entry `ip1394'
[ 8.693018] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 8.693031] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 8.693036] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.693058] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 8.693088] uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000bf60
[ 8.693167] usb usb2: configuration #1 chosen from 1 choice
[ 8.693189] hub 2-0:1.0: USB hub found
[ 8.693194] hub 2-0:1.0: 2 ports detected
[ 8.797167] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 8.797171] PCI: setting IRQ 9 as level-triggered
[ 8.797174] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 8.797186] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 8.797189] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.797209] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 8.797235] uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
[ 8.797313] usb usb3: configuration #1 chosen from 1 choice
[ 8.797333] hub 3-0:1.0: USB hub found
[ 8.797338] hub 3-0:1.0: 2 ports detected
[ 3.404000] Time: acpi_pm clocksource has been installed.
[ 3.456000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[ 3.456000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.456000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.456000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.456000] uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
[ 3.456000] usb usb4: configuration #1 chosen from 1 choice
[ 3.456000] hub 4-0:1.0: USB hub found
[ 3.456000] hub 4-0:1.0: 2 ports detected
[ 3.560000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 3.560000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.560000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.560000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.560000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.560000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.560000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffa80800
[ 3.564000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.564000] usb usb5: configuration #1 chosen from 1 choice
[ 3.564000] hub 5-0:1.0: USB hub found
[ 3.564000] hub 5-0:1.0: 8 ports detected
[ 3.668000] b44.c:v1.01 (Jun 16, 2006)
[ 3.668000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 3.668000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:e1:93:cb
[ 3.668000] ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 3.724000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.736000] SCSI subsystem initialized
[ 3.740000] libata version 2.20 loaded.
[ 3.740000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 3.740000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.896000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 3.896000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.896000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 3.896000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 3.896000] scsi0 : ata_piix
[ 4.060000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 4.060000] ata1.00: ATA-6: TOSHIBA MK8026GAX, PA002D, max UDMA/100
[ 4.060000] ata1.00: 156301488 sectors, multi 8: LBA
[ 4.060000] ata1.00: applying bridge limits
[ 4.068000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 4.068000] ata1.00: configured for UDMA/100
[ 4.068000] scsi1 : ata_piix
[ 4.304000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.388000] ata2.00: ATAPI, max UDMA/33
[ 4.476000] usb 4-2: configuration #1 chosen from 1 choice
[ 4.488000] usbcore: registered new interface driver hiddev
[ 4.504000] input: Logitech USB Receiver as /class/input/input2
[ 4.504000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2
[ 4.504000] usbcore: registered new interface driver usbhid
[ 4.504000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 4.556000] ata2.00: configured for UDMA/33
[ 4.556000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5
[ 4.556000] scsi 1:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AD15 PQ: 0 ANSI: 5
[ 4.572000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.572000] sda: Write Protect is off
[ 4.572000] sda: Mode Sense: 00 3a 00 00
[ 4.572000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.572000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.572000] sda: Write Protect is off
[ 4.572000] sda: Mode Sense: 00 3a 00 00
[ 4.572000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.572000] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.588000] Uniform CD-ROM driver Revision: 3.20
[ 4.588000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.592000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.592000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.632000] sda1 sda2 < sda5 >
[ 4.652000] sd 0:0:0:0: Attached scsi disk sda
[ 4.900000] Attempting manual resume
[ 4.900000] swsusp: Resume From Partition 8:5
[ 4.900000] PM: Checking swsusp image.
[ 4.900000] PM: Resume from disk failed.
[ 4.940000] kjournald starting. Commit interval 5 seconds
[ 4.940000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.000000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc0002c549101]
[ 15.232000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.232000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.724000] Linux agpgart interface v0.102 (c) Dave Jones
[ 15.736000] agpgart: Detected an Intel 915GM Chipset.
[ 15.752000] agpgart: AGP aperture is 256M @ 0x0
[ 15.772000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188]
[ 15.900000] Yenta: ISA IRQ mask 0x0418, PCI irq 7
[ 15.900000] Socket status: 30000006
[ 15.900000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 15.900000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 15.900000] cs: IO port probe 0x2000-0x2fff: clean.
[ 15.900000] pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff
[ 15.900000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 16.024000] sdhci: Secure Digital Host Controller Interface driver
[ 16.024000] sdhci: Copyright(c) Pierre Ossman
[ 16.024000] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
[ 16.024000] ACPI: PCI Interrupt 0000:03:01.2[C] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 16.024000] mmc0: SDHCI at 0xdfcfc700 irq 5 DMA
[ 16.124000] intel_rng: FWH not detected
[ 16.152000] iTCO_vendor_support: vendor-support=0
[ 16.152000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 16.232000] ieee80211_crypt: registered algorithm 'NULL'
[ 16.232000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 16.232000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 16.276000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 16.276000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 16.276000] ACPI: PCI Interrupt 0000:03:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 16.276000] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 16.472000] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
[ 16.484000] input: PS/2 Mouse as /class/input/input3
[ 16.504000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[ 16.516000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.516000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.516000] input: PC Speaker as /class/input/input5
[ 16.624000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 16.624000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 16.796000] cs: IO port probe 0x100-0x3af: clean.
[ 16.800000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 16.800000] cs: IO port probe 0x820-0x8ff: clean.
[ 16.800000] cs: IO port probe 0xc00-0xcf7: clean.
[ 16.800000] cs: IO port probe 0xa00-0xaff: clean.
[ 17.444000] intel8x0_measure_ac97_clock: measured 55503 usecs
[ 17.444000] intel8x0: clocking to 48000
[ 17.616000] fuse init (API version 7.8)
[ 17.668000] lp: driver loaded but no devices found
[ 17.696000] Adding 3028212k swap on /dev/disk/by-uuid/ed82de3a-5a4b-4d2b-8e31-5b0dafbbe595. Priority:-1 extents:1 across:3028212k
[ 17.872000] NET: Registered protocol family 17
[ 17.876000] EXT3 FS on sda1, internal journal
[ 18.348000] NET: Registered protocol family 10
[ 18.348000] lo: Disabled Privacy Extensions
[ 22.492000] ACPI: Battery Slot [BAT0] (battery present)
[ 22.508000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 22.508000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 22.508000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 22.524000] ibm_acpi: ec object not found
[ 22.568000] No dock devices found.
[ 22.620000] input: Lid Switch as /class/input/input6
[ 22.620000] ACPI: Lid Switch [LID]
[ 22.652000] input: Power Button (CM) as /class/input/input7
[ 22.652000] ACPI: Power Button (CM) [PBTN]
[ 22.680000] input: Sleep Button (CM) as /class/input/input8
[ 22.684000] ACPI: Sleep Button (CM) [SBTN]
[ 22.728000] ACPI: AC Adapter [AC] (off-line)
[ 22.748000] Using specific hotkey driver
[ 22.780000] pcc_acpi: loading...
[ 26.348000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.076000] [drm] Initialized drm 1.1.0 20060810
[ 27.084000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 27.088000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 28.500000] ppdev: user-space parallel port driver
[ 28.524000] [drm] Setting GART location based on new memory map
[ 28.524000] [drm] Loading R300 Microcode
[ 28.524000] [drm] writeback test succeeded in 1 usecs
[ 29.488000] apm: BIOS not found.
[ 63.496000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 79.128000] eth1: no IPv6 routers present

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Hi!
I'm still having the problem I described, but I can't think of any
additional info.
So I would like to keep the question open in the hope someone can
eventually answer.
Thanks

Launchpad Answers Janitor wrote:
> Your question #5847 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/5847
>
> Status: Open => Expired
>
> Launchpad Answers Janitor expired the question:
> This question was expired because it remained in the 'Open' state
> without activity for the last 15 days.
>
> _______________________________________________________________________
> If you're still having this problem, you can reopen your question either
> by replying to this email or by going to the following page and
> entering more information about your problem:
> https://answers.launchpad.net/ubuntu/+question/5847
>
>

There's bug #116752. You might want to add your dmesg output to the bug report.

Hi there.

I'm running Ubuntu on dual-boot with Windows XP on my Samsung NP-R50 laptop, Intel Centrino 1,73Ghz, 512 MB (well, right now my Ubuntu says I have 502 MB, go figure), 48 GB of harddisk, ATI Mobility Radeon X300. I've been observing the same problem you mentioned since yesterday. The last events before my PC complained about being "dazed and confused" were some tweaks to my xorg.conf and the installation of Beryl, Kiba-dock and AWN (these last two from third-party repos), for I was trying to see which one worked best. Right now I'm with AWN, but what's important is that the Update Manager started to mention there were some updates to Compiz which I was not able to do, at least not integrally. After a partial update which did not come to its end, Synaptic reported I could not install nor remove any program further on, which was solved after I typed "sudo apt-get install -f" in a terminal. Synaptic was not corrupted anymore, but the newer updates of Compiz got installed too. Anyway, I did not worry about it. Later on I had to do a force reboot after a crash (Beryl, you know), and on the reboot I had that message you reported. I only got to understand what was written after several crashes, because the message disappeared in a fraction of seconds and I only could read parts of it each time.

Right now I did some more tinkerings and, though I did not save my dmesg from one of the previous problematic boots, I'm attaching the dmesg of the current session, which booted with no errors, and my current xorg.conf too.

I still don't think this is a real hardware issue. In my opinion (which is useless in actually solving the problem, but anyway I don't have enough knowledge to do so entirely on my own), the answer might be or on the xorg.conf configuration, or on a corrupted file, or on some conflict between libraries (BTW, I uninstalled the newer Compiz and reinstalled the version that comes with Feisty, after deactivating the third-party repos, but that did not solve the issue right away). This annoys me, since it is almost like a hit or a miss. I can also confirm it did not present that error message after the first today's boot, better said, after the PC was off for some hours. The error repeated itself again later and now it does not appear anymore after I made some changes in my current configuration. Thus the attachments.

P.S.: I just had a crash while I was writing this post. and after that my PC rebooted again (with Ctrl+Alt+Sys+[...]B) and the error message appeared again. So, I ran dmesg again and I'm attaching it too. Then I had another crash, which I could only solve with a forced reboot, and this time it didn't present any problem. And since the forums have limits even for the size of .TXT files, here it goes:

Clean boot DMESG:

Quote:
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fda0000 end: 000000001fea0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fea0000 size: 0000000000011000 end: 000000001feb1000 type: 3
[ 0.000000] copy_e820_map() start: 000000001feb1000 size: 000000000004f000 end: 000000001ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010006000 end: 00000000f0006000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fea0000 (usable)
[ 0.000000] BIOS-e820: 000000001fea0000 - 000000001feb1000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001feb1000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130720) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130720
[ 0.000000] HighMem 130720 -> 130720
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130720
[ 0.000000] On node 0 totalpages: 130720
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125635 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7860
[ 0.000000] ACPI: RSDT (v001 PTLTD Ohlone00 0x06040000 LTP 0x00000000) @ 0x1feabecf
[ 0.000000] ACPI: FADT (v001 SEC MAGIC 0x06040000 PTL 0x0000005f) @ 0x1feb0e88
[ 0.000000] ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1feb0efc
[ 0.000000] ACPI: HPET (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1feb0f64
[ 0.000000] ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1feb0f9c
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1feb0fd8
[ 0.000000] ACPI: SSDT (v001 SataRe SataAhci 0x00001000 INTL 0x20030224) @ 0x1feac6f5
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1feac1ca
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1feabfe0
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1feabf17
[ 0.000000] ACPI: DSDT (v001 SEC MAGIC 0x06040000 INTL 0x20030224) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Detected 1729.111 MHz processor.
[ 5.697352] Built 1 zonelists. Total pages: 129699
[ 5.697356] Kernel command line: root=UUID=ffeee1af-68e1-44ad-8ec5-80d725c2b0c1 ro quiet splash
[ 5.697513] mapped APIC to ffffd000 (fee00000)
[ 5.697515] mapped IOAPIC to ffffc000 (fec00000)
[ 5.697519] Enabling fast FPU save and restore... done.
[ 5.697521] Enabling unmasked SIMD FPU exception support... done.
[ 5.697529] Initializing CPU#0
[ 5.697599] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 5.698736] Console: colour VGA+ 80x25
[ 5.698904] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 5.699102] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 5.712270] Memory: 507320k/522880k available (1992k kernel code, 14964k reserved, 900k data, 328k init, 0k highmem)
[ 5.712280] virtual kernel memory layout:
[ 5.712281] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 5.712282] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 5.712283] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 5.712284] lowmem : 0xc0000000 - 0xdfea0000 ( 510 MB)
[ 5.712286] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 5.712287] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 5.712288] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 5.712292] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 5.712436] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 5.712441] hpet0: 3 64-bit timers, 14318180 Hz
[ 5.713447] Using HPET for base-timer
[ 5.792406] Calibrating delay using timer specific routine.. 3461.50 BogoMIPS (lpj=6923006)
[ 5.792445] Security Framework v1.0.0 initialized
[ 5.792452] SELinux: Disabled at boot.
[ 5.792466] Mount-cache hash table entries: 512
[ 5.792593] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[ 5.792604] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 5.792606] CPU: L2 cache: 2048K
[ 5.792609] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000180 00000000 00000000
[ 5.792618] Compat vDSO mapped to ffffe000.
[ 5.792621] Remapping vsyscall page to ffffe000
[ 5.792632] Checking 'hlt' instruction... OK.
[ 5.808484] SMP alternatives: switching to UP code
[ 5.808645] Freeing SMP alternatives: 11k freed
[ 5.808809] Early unpacking initramfs... done
[ 6.132295] ACPI: Core revision 20060707
[ 6.132643] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 6.136151] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 6.136173] Total of 1 processors activated (3461.50 BogoMIPS).
[ 6.136380] ENABLING IO-APIC IRQs
[ 6.136573] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 6.284231] Brought up 1 CPUs
[ 6.284453] Booting paravirtualized kernel on bare hardware
[ 6.284528] Time: 13:46:25 Date: 06/29/107
[ 6.284553] NET: Registered protocol family 16
[ 6.284625] EISA bus registered
[ 6.284629] ACPI: bus type pci registered
[ 6.284966] PCI: PCI BIOS revision 2.10 entry at 0xfd91e, last bus=6
[ 6.284968] PCI: Using configuration type 1
[ 6.284970] Setting up standard PCI resources
[ 6.296045] ACPI: Interpreter enabled
[ 6.296047] ACPI: Using IOAPIC for interrupt routing
[ 6.297781] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 6.297789] PCI: Probing PCI hardware (bus 00)
[ 6.299570] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 6.299575] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 6.299764] Boot video device is 0000:01:00.0
[ 6.300410] PCI: Transparent bridge - 0000:00:1e.0
[ 6.300469] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[ 6.300472] Please report the result to linux-kernel to fix this permanently
[ 6.300513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 6.306376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 6.307127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 6.307747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 6.308543] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 *10 11)
[ 6.308755] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 10 *11)
[ 6.308966] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 10 *11)
[ 6.309174] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 *10 11)
[ 6.309382] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 *10 11)
[ 6.309589] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 10 11) *0, disabled.
[ 6.309804] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 10 *11)
[ 6.310012] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 6 10 11)
[ 6.311098] ACPI: Power Resource [CFAN] (on)
[ 6.311189] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 6.311196] pnp: PnP ACPI init
[ 6.313094] pnp: PnP ACPI: found 10 devices
[ 6.313098] PnPBIOS: Disabled by ACPI PNP
[ 6.313131] PCI: Using ACPI for IRQ routing
[ 6.313134] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 6.332487] NET: Registered protocol family 8
[ 6.332489] NET: Registered protocol family 20
[ 6.332831] PCI: Bridge: 0000:00:01.0
[ 6.332834] IO window: 3000-3fff
[ 6.332838] MEM window: c0100000-c01fffff
[ 6.332841] PREFETCH window: d0000000-d7ffffff
[ 6.332844] PCI: Bridge: 0000:00:1c.0
[ 6.332847] IO window: 4000-4fff
[ 6.332853] MEM window: c4000000-c7ffffff
[ 6.332857] PREFETCH window: d8000000-dbffffff
[ 6.332869] PCI: Bus 7, cardbus bridge: 0000:06:09.0
[ 6.332871] IO window: 00005000-000050ff
[ 6.332875] IO window: 00005400-000054ff
[ 6.332880] PREFETCH window: 30000000-33ffffff
[ 6.332885] MEM window: 34000000-37ffffff
[ 6.332889] PCI: Bridge: 0000:00:1e.0
[ 6.332892] IO window: 5000-5fff
[ 6.332898] MEM window: c8000000-c80fffff
[ 6.332903] PREFETCH window: 30000000-33ffffff
[ 6.332918] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.332923] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 6.332943] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 6.332949] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 6.332962] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 6.333014] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.333038] NET: Registered protocol family 2
[ 6.364211] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 6.364277] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 6.364370] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 6.364418] TCP: Hash tables configured (established 16384 bind 8192)
[ 6.364420] TCP reno registered
[ 6.376252] checking if image is initramfs... it is
[ 7.008585] Freeing initrd memory: 6768k freed
[ 7.008803] Simple Boot Flag at 0x36 set to 0x1
[ 7.009025] audit: initializing netlink socket (disabled)
[ 7.009039] audit(1185716785.380:1): initialized
[ 7.009159] VFS: Disk quotas dquot_6.5.1
[ 7.009178] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.009224] io scheduler noop registered
[ 7.009227] io scheduler anticipatory registered
[ 7.009229] io scheduler deadline registered
[ 7.009239] io scheduler cfq registered (default)
[ 7.009504] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 7.009532] assign_interrupt_mode Found MSI capability
[ 7.009535] Allocate Port Service[0000:00:01.0cie00]
[ 7.009606] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 7.009657] assign_interrupt_mode Found MSI capability
[ 7.009660] Allocate Port Service[0000:00:1c.0cie00]
[ 7.009688] Allocate Port Service[0000:00:1c.0cie02]
[ 7.009847] isapnp: Scanning for PnP cards...
[ 7.363764] isapnp: No Plug & Play device found
[ 7.386245] Real Time Clock Driver v1.12ac
[ 7.386456] hpet_resources: 0xfed00000 is busy
[ 7.386471] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 7.387109] ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 20 (level, low) -> IRQ 18
[ 7.387117] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 7.387191] mice: PS/2 mouse device common for all mice
[ 7.387688] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 7.387968] input: Macintosh mouse button emulation as /class/input/input0
[ 7.388000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 7.388004] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 7.388226] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 7.391091] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 7.392508] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.392511] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 7.392514] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 7.392516] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 7.392519] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 7.392628] EISA: Probing bus 0 at eisa.0
[ 7.392636] Cannot allocate resource for EISA slot 1
[ 7.392639] Cannot allocate resource for EISA slot 2
[ 7.392641] Cannot allocate resource for EISA slot 3
[ 7.392643] Cannot allocate resource for EISA slot 4
[ 7.392646] Cannot allocate resource for EISA slot 5
[ 7.392659] EISA: Detected 0 cards.
[ 7.422743] TCP cubic registered
[ 7.422752] NET: Registered protocol family 1
[ 7.422772] Using IPI No-Shortcut mode
[ 7.422829] ACPI: (supports S0 S3 S4 S5)
[ 7.422875] Magic number: 15:798:787
[ 7.422877] hash matches drivers/base/power/resume.c:46
[ 7.422964] hash matches device ptyq9
[ 7.423149] Freeing unused kernel memory: 328k freed
[ 7.423730] Time: tsc clocksource has been installed.
[ 7.437010] input: AT Translated Set 2 keyboard as /class/input/input1
[ 8.620097] Capability LSM initialized
[ 8.647446] ACPI: Fan [FAN1] (on)
[ 8.650903] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 8.650908] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 8.652126] ACPI: Thermal Zone [THRM] (52 C)
[ 8.945415] usbcore: registered new interface driver usbfs
[ 8.945437] usbcore: registered new interface driver hub
[ 8.945455] usbcore: registered new device driver usb
[ 8.946219] USB Universal Host Controller Interface driver v3.0
[ 8.946267] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 8.946277] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 8.946281] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.946429] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 8.946460] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 8.946551] usb usb1: configuration #1 chosen from 1 choice
[ 8.946572] hub 1-0:1.0: USB hub found
[ 8.946576] hub 1-0:1.0: 2 ports detected
[ 9.029058] SCSI subsystem initialized
[ 9.034020] libata version 2.20 loaded.
[ 9.047214] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[ 9.047226] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 9.047231] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.047251] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 9.047285] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 9.047369] usb usb2: configuration #1 chosen from 1 choice
[ 9.047391] hub 2-0:1.0: USB hub found
[ 9.047396] hub 2-0:1.0: 2 ports detected
[ 9.073655] ieee1394: Initialized config rom entry `ip1394'
[ 9.151154] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 9.151167] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 9.151172] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.151192] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 9.151224] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840
[ 9.151306] usb usb3: configuration #1 chosen from 1 choice
[ 9.151330] hub 3-0:1.0: USB hub found
[ 9.151335] hub 3-0:1.0: 2 ports detected
[ 9.255098] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 9.255110] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 9.255115] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 9.255135] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 9.255167] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 9.255255] usb usb4: configuration #1 chosen from 1 choice
[ 9.255277] hub 4-0:1.0: USB hub found
[ 9.255282] hub 4-0:1.0: 2 ports detected
[ 3.452000] Time: hpet clocksource has been installed.
[ 3.548000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.548000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.548000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.548000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.548000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.548000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.548000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xc0000000
[ 3.552000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.552000] usb usb5: configuration #1 chosen from 1 choice
[ 3.552000] hub 5-0:1.0: USB hub found
[ 3.552000] hub 5-0:1.0: 8 ports detected
[ 3.656000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.656000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[ 3.656000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.656000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118c0 irq 14
[ 3.656000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118c8 irq 15
[ 3.656000] scsi0 : ata_piix
[ 3.984000] ata1.00: ata_hpa_resize 1: sectors = 102022014, hpa_sectors = 117210240
[ 3.984000] ata1.00: Host Protected Area detected.
[ 3.984000] current size : 102022014 sectors (52235 MB)
[ 3.984000] native size : 117210240 sectors (60011 MB)
[ 3.984000] ata1.00: SET of native returned 0, expected 117210240
[ 3.984000] ata1.00: ATA-6: HTS541060G9AT00, MB3OA60A, max UDMA/100
[ 3.984000] ata1.00: 102022014 sectors, multi 16: LBA48
[ 3.984000] ata1.01: ATAPI, max UDMA/33
[ 3.992000] ata1.00: ata_hpa_resize 1: sectors = 102022014, hpa_sectors = 117210240
[ 3.992000] ata1.00: Host Protected Area detected.
[ 3.992000] current size : 102022014 sectors (52235 MB)
[ 3.992000] native size : 117210240 sectors (60011 MB)
[ 3.992000] ata1.00: SET of native returned 0, expected 117210240
[ 3.992000] ata1.00: configured for UDMA/100
[ 4.156000] ata1.01: configured for UDMA/33
[ 4.156000] scsi1 : ata_piix
[ 4.156000] ata2: port disabled. ignoring.
[ 4.156000] scsi 0:0:0:0: Direct-Access ATA HTS541060G9AT00 MB3O PQ: 0 ANSI: 5
[ 4.156000] scsi 0:0:1:0: CD-ROM TEAC DV-W28EA S.0A PQ: 0 ANSI: 5
[ 4.160000] b44.c:v1.01 (Jun 16, 2006)
[ 4.160000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 4.164000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:00:f0:7c:b0:c8
[ 4.164000] ACPI: PCI Interrupt 0000:06:09.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 4.216000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[c8001000-c80017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.252000] SCSI device sda: 102022014 512-byte hdwr sectors (52235 MB)
[ 4.264000] sda: Write Protect is off
[ 4.264000] sda: Mode Sense: 00 3a 00 00
[ 4.284000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.284000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.284000] Uniform CD-ROM driver Revision: 3.20
[ 4.284000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 4.288000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.288000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.292000] SCSI device sda: 102022014 512-byte hdwr sectors (52235 MB)
[ 4.292000] sda: Write Protect is off
[ 4.292000] sda: Mode Sense: 00 3a 00 00
[ 4.316000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.316000] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 4.388000] sd 0:0:0:0: Attached scsi disk sda
[ 4.692000] Attempting manual resume
[ 4.692000] swsusp: Resume From Partition 8:5
[ 4.692000] PM: Checking swsusp image.
[ 4.692000] PM: Resume from disk failed.
[ 4.724000] kjournald starting. Commit interval 5 seconds
[ 4.724000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.496000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f041200d7c1e]
[ 16.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.268000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.288000] intel_rng: FWH not detected
[ 16.328000] iTCO_vendor_support: vendor-support=0
[ 16.328000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 16.328000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.328000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.732000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.804000] NET: Registered protocol family 17
[ 16.808000] agpgart: Detected an Intel 915GM Chipset.
[ 16.824000] agpgart: AGP aperture is 256M @ 0x0
[ 17.012000] sdhci: Secure Digital Host Controller Interface driver
[ 17.012000] sdhci: Copyright(c) Pierre Ossman
[ 17.012000] sdhci: SDHCI controller found at 0000:06:09.2 [1180:0822] (rev 17)
[ 17.012000] ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 17.012000] mmc0: SDHCI at 0xc8001800 irq 21 DMA
[ 17.040000] Yenta: CardBus bridge found at 0000:06:09.0 [144d:b035]
[ 17.168000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[ 17.168000] Socket status: 30000006
[ 17.168000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 17.168000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 17.168000] cs: IO port probe 0x5000-0x5fff: clean.
[ 17.168000] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
[ 17.168000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 17.212000] ieee80211_crypt: registered algorithm 'NULL'
[ 17.220000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 17.220000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 17.252000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 17.252000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 17.252000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 17.252000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 17.532000] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 17.964000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17
[ 17.964000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 18.024000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000
[ 18.060000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 18.092000] cs: IO port probe 0x100-0x3af: clean.
[ 18.096000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.096000] cs: IO port probe 0x820-0x8ff: clean.
[ 18.096000] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.096000] cs: IO port probe 0xa00-0xaff: clean.
[ 18.128000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 18.128000] b44: eth0: Flow control is off for TX and off for RX.
[ 18.784000] intel8x0_measure_ac97_clock: measured 55529 usecs
[ 18.784000] intel8x0: clocking to 48000
[ 18.892000] fuse init (API version 7.
[ 18.944000] lp: driver loaded but no devices found
[ 18.984000] Adding 1028120k swap on /dev/disk/by-uuid/52f3275b-5e16-45bc-acec-2497ccfd28e3. Priority:-1 extents:1 across:1028120k
[ 19.204000] EXT3 FS on sda3, internal journal
[ 24.284000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 24.400000] NTFS volume version 3.1.
[ 28.716000] input: Power Button (FF) as /class/input/input3
[ 28.720000] ACPI: Power Button (FF) [PWRF]
[ 28.752000] input: Lid Switch as /class/input/input4
[ 28.756000] ACPI: Lid Switch [LID0]
[ 28.788000] input: Power Button (CM) as /class/input/input5
[ 28.792000] ACPI: Power Button (CM) [PWRB]
[ 28.828000] input: Sleep Button (CM) as /class/input/input6
[ 28.832000] ACPI: Sleep Button (CM) [SLPB]
[ 28.844000] ACPI: AC Adapter [ADP1] (on-line)
[ 28.952000] ACPI: Battery Slot [BAT1] (battery present)
[ 29.036000] Using specific hotkey driver
[ 29.072000] ibm_acpi: ec object not found
[ 29.096000] No dock devices found.
[ 29.128000] ACPI: Video Device [ATIM] (multi-head: yes rom: no post: no)
[ 29.128000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 29.164000] pcc_acpi: loading...
[ 31.380000] [drm] Initialized drm 1.1.0 20060810
[ 31.392000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.392000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 32.628000] ppdev: user-space parallel port driver
[ 32.716000] [drm] Setting GART location based on new memory map
[ 32.720000] [drm] Loading R300 Microcode
[ 32.720000] [drm] writeback test succeeded in 1 usecs
[ 33.460000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 33.460000] apm: overridden by ACPI.
[ 33.624000] Bluetooth: Core ver 2.11
[ 33.624000] NET: Registered protocol family 31
[ 33.624000] Bluetooth: HCI device and connection manager initialized
[ 33.624000] Bluetooth: HCI socket layer initialized
[ 33.668000] Bluetooth: L2CAP ver 2.8
[ 33.668000] Bluetooth: L2CAP socket layer initialized
[ 33.860000] Bluetooth: RFCOMM socket layer initialized
[ 33.860000] Bluetooth: RFCOMM TTY layer initialized
[ 33.860000] Bluetooth: RFCOMM ver 1.8
Error boot DMESG:

Quote:
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fda0000 end: 000000001fea0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fea0000 size: 0000000000011000 end: 000000001feb1000 type: 3
[ 0.000000] copy_e820_map() start: 000000001feb1000 size: 000000000004f000 end: 000000001ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010006000 end: 00000000f0006000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fea0000 (usable)
[ 0.000000] BIOS-e820: 000000001fea0000 - 000000001feb1000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001feb1000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130720) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130720
[ 0.000000] HighMem 130720 -> 130720
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130720
[ 0.000000] On node 0 totalpages: 130720
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125635 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7860
[ 0.000000] ACPI: RSDT (v001 PTLTD Ohlone00 0x06040000 LTP 0x00000000) @ 0x1feabecf
[ 0.000000] ACPI: FADT (v001 SEC MAGIC 0x06040000 PTL 0x0000005f) @ 0x1feb0e88
[ 0.000000] ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1feb0efc
[ 0.000000] ACPI: HPET (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1feb0f64
[ 0.000000] ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1feb0f9c
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1feb0fd8
[ 0.000000] ACPI: SSDT (v001 SataRe SataAhci 0x00001000 INTL 0x20030224) @ 0x1feac6f5
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1feac1ca
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1feabfe0
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1feabf17
[ 0.000000] ACPI: DSDT (v001 SEC MAGIC 0x06040000 INTL 0x20030224) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Detected 1729.036 MHz processor.
[ 10.247002] Built 1 zonelists. Total pages: 129699
[ 10.247007] Kernel command line: root=UUID=ffeee1af-68e1-44ad-8ec5-80d725c2b0c1 ro quiet splash
[ 10.247163] mapped APIC to ffffd000 (fee00000)
[ 10.247165] mapped IOAPIC to ffffc000 (fec00000)
[ 10.247169] Enabling fast FPU save and restore... done.
[ 10.247171] Enabling unmasked SIMD FPU exception support... done.
[ 10.247179] Initializing CPU#0
[ 10.247248] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 10.248387] Console: colour VGA+ 80x25
[ 10.248553] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.248750] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 10.261904] Memory: 507320k/522880k available (1992k kernel code, 14964k reserved, 900k data, 328k init, 0k highmem)
[ 10.261913] virtual kernel memory layout:
[ 10.261914] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 10.261916] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.261917] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 10.261918] lowmem : 0xc0000000 - 0xdfea0000 ( 510 MB)
[ 10.261919] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 10.261921] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 10.261922] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 10.261925] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.262070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.262076] hpet0: 3 64-bit timers, 14318180 Hz
[ 10.263081] Using HPET for base-timer
[ 10.342041] Calibrating delay using timer specific routine.. 3461.45 BogoMIPS (lpj=6922910)
[ 10.342078] Security Framework v1.0.0 initialized
[ 10.342086] SELinux: Disabled at boot.
[ 10.342100] Mount-cache hash table entries: 512
[ 10.342228] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[ 10.342239] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.342241] CPU: L2 cache: 2048K
[ 10.342244] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000180 00000000 00000000
[ 10.342253] Compat vDSO mapped to ffffe000.
[ 10.342257] Remapping vsyscall page to ffffe000
[ 10.342267] Checking 'hlt' instruction... OK.
[ 10.358120] SMP alternatives: switching to UP code
[ 10.358280] Freeing SMP alternatives: 11k freed
[ 10.358445] Early unpacking initramfs... done
[ 10.682544] ACPI: Core revision 20060707
[ 10.682889] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 10.686207] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 10.686230] Total of 1 processors activated (3461.45 BogoMIPS).
[ 10.686419] ENABLING IO-APIC IRQs
[ 10.686613] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.833866] Brought up 1 CPUs
[ 10.834088] Booting paravirtualized kernel on bare hardware
[ 10.834162] Time: 17:16:13 Date: 06/29/107
[ 10.834187] NET: Registered protocol family 16
[ 10.834258] EISA bus registered
[ 10.834262] ACPI: bus type pci registered
[ 10.834599] PCI: PCI BIOS revision 2.10 entry at 0xfd91e, last bus=6
[ 10.834601] PCI: Using configuration type 1
[ 10.834603] Setting up standard PCI resources
[ 10.845679] ACPI: Interpreter enabled
[ 10.845681] ACPI: Using IOAPIC for interrupt routing
[ 10.847419] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.847427] PCI: Probing PCI hardware (bus 00)
[ 10.849204] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 10.849209] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 10.849398] Boot video device is 0000:01:00.0
[ 10.850045] PCI: Transparent bridge - 0000:00:1e.0
[ 10.850104] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[ 10.850107] Please report the result to linux-kernel to fix this permanently
[ 10.850149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.855549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 10.856301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 10.856920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 10.857711] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 *10 11)
[ 10.857943] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 10 *11)
[ 10.858154] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 10 *11)
[ 10.858363] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 *10 11)
[ 10.858572] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 *10 11)
[ 10.858779] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 10 11) *0, disabled.
[ 10.858993] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 10 *11)
[ 10.859202] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 6 10 11)
[ 10.860313] ACPI: Power Resource [CFAN] (on)
[ 10.860404] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.860412] pnp: PnP ACPI init
[ 10.862307] pnp: PnP ACPI: found 10 devices
[ 10.862311] PnPBIOS: Disabled by ACPI PNP
[ 10.862345] PCI: Using ACPI for IRQ routing
[ 10.862348] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.881705] NET: Registered protocol family 8
[ 10.881708] NET: Registered protocol family 20
[ 10.882057] PCI: Bridge: 0000:00:01.0
[ 10.882060] IO window: 3000-3fff
[ 10.882064] MEM window: c0100000-c01fffff
[ 10.882067] PREFETCH window: d0000000-d7ffffff
[ 10.882070] PCI: Bridge: 0000:00:1c.0
[ 10.882073] IO window: 4000-4fff
[ 10.882079] MEM window: c4000000-c7ffffff
[ 10.882083] PREFETCH window: d8000000-dbffffff
[ 10.882095] PCI: Bus 7, cardbus bridge: 0000:06:09.0
[ 10.882097] IO window: 00005000-000050ff
[ 10.882102] IO window: 00005400-000054ff
[ 10.882107] PREFETCH window: 30000000-33ffffff
[ 10.882112] MEM window: 34000000-37ffffff
[ 10.882116] PCI: Bridge: 0000:00:1e.0
[ 10.882119] IO window: 5000-5fff
[ 10.882125] MEM window: c8000000-c80fffff
[ 10.882129] PREFETCH window: 30000000-33ffffff
[ 10.882144] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.882150] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 10.882170] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 10.882176] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.882189] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.882243] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.882266] NET: Registered protocol family 2
[ 10.909849] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 10.909914] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 10.910008] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 10.910055] TCP: Hash tables configured (established 16384 bind 8192)
[ 10.910058] TCP reno registered
[ 10.921891] checking if image is initramfs... it is
[ 11.554630] Freeing initrd memory: 6768k freed
[ 11.554849] Simple Boot Flag at 0x36 set to 0x1
[ 11.555070] audit: initializing netlink socket (disabled)
[ 11.555084] audit(1185729373.376:1): initialized
[ 11.555204] VFS: Disk quotas dquot_6.5.1
[ 11.555223] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.555270] io scheduler noop registered
[ 11.555272] io scheduler anticipatory registered
[ 11.555275] io scheduler deadline registered
[ 11.555284] io scheduler cfq registered (default)
[ 11.555548] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 11.555576] assign_interrupt_mode Found MSI capability
[ 11.555580] Allocate Port Service[0000:00:01.0cie00]
[ 11.555646] Uhhuh. NMI received for unknown reason a1 on CPU 0.
[ 11.555693] You have some hardware problem, likely on the PCI bus.
[ 11.555735] Dazed and confused, but trying to continue
[ 11.555792] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.555843] assign_interrupt_mode Found MSI capability
[ 11.555846] Allocate Port Service[0000:00:1c.0cie00]
[ 11.555874] Allocate Port Service[0000:00:1c.0cie02]
[ 11.556035] isapnp: Scanning for PnP cards...
[ 11.909975] isapnp: No Plug & Play device found
[ 11.932379] Real Time Clock Driver v1.12ac
[ 11.932591] hpet_resources: 0xfed00000 is busy
[ 11.932605] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 11.933251] ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 20 (level, low) -> IRQ 18
[ 11.933259] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 11.933330] mice: PS/2 mouse device common for all mice
[ 11.933859] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 11.934050] input: Macintosh mouse button emulation as /class/input/input0
[ 11.934083] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 11.934087] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 11.934312] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.937302] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 11.938878] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.938882] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 11.938884] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 11.938887] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 11.938889] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 11.939004] EISA: Probing bus 0 at eisa.0
[ 11.939011] Cannot allocate resource for EISA slot 1
[ 11.939014] Cannot allocate resource for EISA slot 2
[ 11.939016] Cannot allocate resource for EISA slot 3
[ 11.939018] Cannot allocate resource for EISA slot 4
[ 11.939021] Cannot allocate resource for EISA slot 5
[ 11.939034] EISA: Detected 0 cards.
[ 11.969119] TCP cubic registered
[ 11.969128] NET: Registered protocol family 1
[ 11.969148] Using IPI No-Shortcut mode
[ 11.969205] ACPI: (supports S0 S3 S4 S5)
[ 11.969252] Magic number: 15:707:290
[ 11.969266] hash matches device ttyz4
[ 11.969353] hash matches device tty23
[ 11.969359] Time: tsc clocksource has been installed.
[ 11.969531] Freeing unused kernel memory: 328k freed
[ 11.983341] input: AT Translated Set 2 keyboard as /class/input/input1
[ 13.169826] Capability LSM initialized
[ 13.197142] ACPI: Fan [FAN1] (on)
[ 13.200592] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.200597] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 13.201838] ACPI: Thermal Zone [THRM] (60 C)
[ 13.498817] usbcore: registered new interface driver usbfs
[ 13.498839] usbcore: registered new interface driver hub
[ 13.498857] usbcore: registered new device driver usb
[ 13.499631] USB Universal Host Controller Interface driver v3.0
[ 13.499677] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 13.499688] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 13.499692] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.499848] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 13.499877] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 13.499967] usb usb1: configuration #1 chosen from 1 choice
[ 13.499988] hub 1-0:1.0: USB hub found
[ 13.499993] hub 1-0:1.0: 2 ports detected
[ 13.566477] SCSI subsystem initialized
[ 13.588823] libata version 2.20 loaded.
[ 13.600836] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
[ 13.600849] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 13.600853] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.600878] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 13.600911] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 13.600991] usb usb2: configuration #1 chosen from 1 choice
[ 13.601013] hub 2-0:1.0: USB hub found
[ 13.601019] hub 2-0:1.0: 2 ports detected
[ 13.704765] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 13.704777] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 13.704782] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 13.704806] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 13.704838] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840
[ 13.704916] usb usb3: configuration #1 chosen from 1 choice
[ 13.704942] hub 3-0:1.0: USB hub found
[ 13.704946] hub 3-0:1.0: 2 ports detected
[ 13.712777] ieee1394: Initialized config rom entry `ip1394'
[ 3.448000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.448000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.448000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.448000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.448000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 3.448000] usb usb4: configuration #1 chosen from 1 choice
[ 3.448000] hub 4-0:1.0: USB hub found
[ 3.448000] hub 4-0:1.0: 2 ports detected
[ 3.452000] Time: hpet clocksource has been installed.
[ 3.552000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.552000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.552000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.552000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.552000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.552000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.552000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xc0000000
[ 3.556000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.556000] usb usb5: configuration #1 chosen from 1 choice
[ 3.556000] hub 5-0:1.0: USB hub found
[ 3.556000] hub 5-0:1.0: 8 ports detected
[ 3.660000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.660000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[ 3.660000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.660000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118c0 irq 14
[ 3.660000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118c8 irq 15
[ 3.660000] scsi0 : ata_piix
[ 3.988000] ata1.00: ata_hpa_resize 1: sectors = 102022014, hpa_sectors = 117210240
[ 3.988000] ata1.00: Host Protected Area detected.
[ 3.988000] current size : 102022014 sectors (52235 MB)
[ 3.988000] native size : 117210240 sectors (60011 MB)
[ 3.988000] ata1.00: SET of native returned 0, expected 117210240
[ 3.988000] ata1.00: ATA-6: HTS541060G9AT00, MB3OA60A, max UDMA/100
[ 3.988000] ata1.00: 102022014 sectors, multi 16: LBA48
[ 3.988000] ata1.01: ATAPI, max UDMA/33
[ 3.996000] ata1.00: ata_hpa_resize 1: sectors = 102022014, hpa_sectors = 117210240
[ 3.996000] ata1.00: Host Protected Area detected.
[ 3.996000] current size : 102022014 sectors (52235 MB)
[ 3.996000] native size : 117210240 sectors (60011 MB)
[ 3.996000] ata1.00: SET of native returned 0, expected 117210240
[ 3.996000] ata1.00: configured for UDMA/100
[ 4.160000] ata1.01: configured for UDMA/33
[ 4.160000] scsi1 : ata_piix
[ 4.160000] ata2: port disabled. ignoring.
[ 4.160000] scsi 0:0:0:0: Direct-Access ATA HTS541060G9AT00 MB3O PQ: 0 ANSI: 5
[ 4.160000] scsi 0:0:1:0: CD-ROM TEAC DV-W28EA S.0A PQ: 0 ANSI: 5
[ 4.164000] b44.c:v1.01 (Jun 16, 2006)
[ 4.164000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 4.168000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:00:f0:7c:b0:c8
[ 4.168000] ACPI: PCI Interrupt 0000:06:09.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 4.220000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[c8001000-c80017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.240000] SCSI device sda: 102022014 512-byte hdwr sectors (52235 MB)
[ 4.240000] sda: Write Protect is off
[ 4.240000] sda: Mode Sense: 00 3a 00 00
[ 4.240000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.240000] SCSI device sda: 102022014 512-byte hdwr sectors (52235 MB)
[ 4.240000] sda: Write Protect is off
[ 4.240000] sda: Mode Sense: 00 3a 00 00
[ 4.240000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.240000] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 4.280000] sd 0:0:0:0: Attached scsi disk sda
[ 4.280000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.280000] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.352000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.352000] Uniform CD-ROM driver Revision: 3.20
[ 4.352000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 4.780000] Attempting manual resume
[ 4.780000] swsusp: Resume From Partition 8:5
[ 4.780000] PM: Checking swsusp image.
[ 4.780000] PM: Resume from disk failed.
[ 4.804000] kjournald starting. Commit interval 5 seconds
[ 4.804000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.500000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f041200d7c1e]
[ 16.244000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.248000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.596000] intel_rng: FWH not detected
[ 16.640000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.644000] NET: Registered protocol family 17
[ 16.660000] agpgart: Detected an Intel 915GM Chipset.
[ 16.676000] agpgart: AGP aperture is 256M @ 0x0
[ 16.900000] iTCO_vendor_support: vendor-support=0
[ 16.900000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 16.900000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.900000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.916000] ieee80211_crypt: registered algorithm 'NULL'
[ 16.916000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 16.916000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 16.928000] sdhci: Secure Digital Host Controller Interface driver
[ 16.928000] sdhci: Copyright(c) Pierre Ossman
[ 16.928000] sdhci: SDHCI controller found at 0000:06:09.2 [1180:0822] (rev 17)
[ 16.928000] ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 16.928000] mmc0: SDHCI at 0xc8001800 irq 21 DMA
[ 16.984000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 16.984000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 16.984000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 16.984000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 17.740000] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 17.740000] Yenta: CardBus bridge found at 0000:06:09.0 [144d:b035]
[ 17.812000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000
[ 17.848000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 17.868000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[ 17.868000] Socket status: 30000006
[ 17.868000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 17.868000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 17.868000] cs: IO port probe 0x5000-0x5fff: clean.
[ 17.868000] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
[ 17.868000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 17.872000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17
[ 17.872000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 18.180000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 18.180000] b44: eth0: Flow control is off for TX and off for RX.
[ 18.184000] cs: IO port probe 0x100-0x3af: clean.
[ 18.184000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.184000] cs: IO port probe 0x820-0x8ff: clean.
[ 18.184000] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.188000] cs: IO port probe 0xa00-0xaff: clean.
[ 18.692000] intel8x0_measure_ac97_clock: measured 55532 usecs
[ 18.692000] intel8x0: clocking to 48000
[ 18.816000] fuse init (API version 7.
[ 18.868000] lp: driver loaded but no devices found
[ 18.908000] Adding 1028120k swap on /dev/disk/by-uuid/52f3275b-5e16-45bc-acec-2497ccfd28e3. Priority:-1 extents:1 across:1028120k
[ 19.136000] EXT3 FS on sda3, internal journal
[ 24.492000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 24.568000] NTFS volume version 3.1.
[ 28.764000] input: Power Button (FF) as /class/input/input3
[ 28.768000] ACPI: Power Button (FF) [PWRF]
[ 28.800000] input: Lid Switch as /class/input/input4
[ 28.804000] ACPI: Lid Switch [LID0]
[ 28.840000] input: Power Button (CM) as /class/input/input5
[ 28.840000] ACPI: Power Button (CM) [PWRB]
[ 28.876000] input: Sleep Button (CM) as /class/input/input6
[ 28.876000] ACPI: Sleep Button (CM) [SLPB]
[ 28.888000] ACPI: AC Adapter [ADP1] (on-line)
[ 29.008000] ACPI: Battery Slot [BAT1] (battery present)
[ 29.112000] Using specific hotkey driver
[ 29.148000] ibm_acpi: ec object not found
[ 29.172000] No dock devices found.
[ 29.200000] ACPI: Video Device [ATIM] (multi-head: yes rom: no post: no)
[ 29.200000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 29.248000] pcc_acpi: loading...
[ 31.252000] [drm] Initialized drm 1.1.0 20060810
[ 31.264000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.264000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 32.536000] ppdev: user-space parallel port driver
[ 32.544000] [drm] Setting GART location based on new memory map
[ 32.548000] [drm] Loading R300 Microcode
[ 32.548000] [drm] writeback test succeeded in 1 usecs
[ 33.332000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 33.332000] apm: overridden by ACPI.
[ 33.412000] Bluetooth: Core ver 2.11
[ 33.412000] NET: Registered protocol family 31
[ 33.412000] Bluetooth: HCI device and connection manager initialized
[ 33.412000] Bluetooth: HCI socket layer initialized
[ 33.432000] Bluetooth: L2CAP ver 2.8
[ 33.432000] Bluetooth: L2CAP socket layer initialized
[ 33.632000] Bluetooth: RFCOMM socket layer initialized
[ 33.632000] Bluetooth: RFCOMM TTY layer initialized
[ 33.632000] Bluetooth: RFCOMM ver 1.8
My current xorg.conf:

Quote:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pt"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc M22 [Radeon Mobility M300]"
Driver "ati"
BusID "PCI:1:0:0"
Option "DisableGLXRootClipping" "true"
Option "AddARGBGLXVisuals" "true"
Option "XAANoOffscreenPixmaps"
Option "TripleBuffer" "true"
Option "ColorTiling" "on"
Option "AllowGLXWithComposite" "true"
Option "EnablePageFlip" "true"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc M22 [Radeon Mobility M300]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
Option "AIGLX" "true"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection
Thanks for the attention. Let us hope this issue gets solved soon.

i've the same today, just started, Latitude D610, Ati M300, 1.6Ghz, 512 mb, feisty fawn.

[33502.500000] Uhhuh. NMI received for unknown reason b0 on CPU 0.
[33502.500000] You have some hardware problem, likely on the PCI bus.
[33502.500000] Dazed and confused, but trying to continue

lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
03:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
03:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller
03:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)

Section "Files"
 FontPath "/usr/share/fonts/X11/misc"
 FontPath "/usr/share/fonts/X11/cyrillic"
 FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/Type1"
 FontPath "/usr/share/fonts/X11/100dpi"
 FontPath "/usr/share/fonts/X11/75dpi"
 # path to defoma fonts
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
 Load "i2c"
 Load "bitmap"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "vbe"
 Load "dbe"
EndSection

Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver "kbd"
 Option "CoreKeyboard"
 Option "XkbRules" "xorg"
 Option "XkbModel" "pc105"
 Option "XkbLayout" "us"
 Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
 Identifier "Configured Mouse"
 Driver "mouse"
 Option "CorePointer"
 Option "Device" "/dev/input/mice"
 Option "Protocol" "ImPS/2"
 Option "Buttons" "7"
 Option "ZAxisMapping" "4 5"
 Option "ButtonMapping" "1 2 3 6 7"
 Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
 Identifier "Synaptics Touchpad"
 Driver "synaptics"
 Option "SendCoreEvents" "true"
 Option "Device" "/dev/psaux"
 Option "Protocol" "auto-dev"
 Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
 Driver "wacom"
 Identifier "stylus"
 Option "Device" "/dev/input/wacom"
 Option "Type" "stylus"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
 Driver "wacom"
 Identifier "eraser"
 Option "Device" "/dev/input/wacom"
 Option "Type" "eraser"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
 Driver "wacom"
 Identifier "cursor"
 Option "Device" "/dev/input/wacom"
 Option "Type" "cursor"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
 Identifier "Generic Video Card"
 Driver "ati"
 BusID "PCI:1:0:0"
 #Option "DRI" "true"
 Option "ColorTiling" "on"
 #Option "EnablePageFlip" "true"
 Option "AccelMethod" "XAA"
 Option "XAANoOffscreenPixmaps"
 Option "RenderAccel" "true"
EndSection

Section "Monitor"
 Identifier "Generic Monitor"
 Option "DPMS"
 HorizSync 28-51
 VertRefresh 43-60
EndSection

Section "Screen"
 Identifier "Default Screen"
 Device "Generic Video Card"
 Monitor "Generic Monitor"
 DefaultDepth 24
 SubSection "Display"
  Depth 1
  Modes "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 4
  Modes "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 8
  Modes "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 15
  Modes "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 16
  Modes "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 24
  Modes "1024x768" "800x600" "640x480"
 EndSubSection
EndSection

Section "ServerLayout"
        Option "AIGLX" "true"
 Identifier "Default Layout"
 Screen "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
 InputDevice "stylus" "SendCoreEvents"
 InputDevice "cursor" "SendCoreEvents"
 InputDevice "eraser" "SendCoreEvents"
 InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
 Mode 0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection

Hi all,

I have an Acer Aspire 1802WSMI, 2Go RAM, ATI X600 Mobility, Wifi (NDISWrapper), Pentium 4 HT 3.0GHz, Ubuntu Feisty.

I had the same problem; Although freezed (as described in previous posts) sometimes the computer was still remotely (ssh...) accessible sometimes not.

Though it did not entirely solved the issue, this helped:
1/ add kernel directive "noapic" in the kernel's startup options (/boot/grub/menu.lst).
2/ stop using Beryl...

Since I did 1/; the problem never occurred when not running Beryl!!!
When using Beryl, it still occurs, but far less frequently.

SIDE EFFECT: sometimes, the synaptic hardware (touchpad & laptop's keyboard) do not initialise properly at boot time! As a result, I end up in front the GDM screen without being able to log in or do anything whatsoever (no keyboard). Luckily, as I'm using an external usb mouse, I still have some control and I'm able to reboot. Note that sometimes I need to do it several times before it succeeds to initialise the synaptic hardware... This problem occurs almost systematically when I have my external usb HDD connected to the laptop. Unplugging the HDD helps reducing the frequency of this nasty side effect.
For now I live with this problem because I prefer it to random freezes...

Hope this will help.
Cheers,
Manu

I got "Uhhuh. NMI received for unknown reason a1 on CPU 0." on a Dell Mini 10v netbook, the very first time I ran the Ubuntu Karmic beta UNR (from a USB SD card, without installing it on the hard drive). FYI.