perdida de datos en disco IDE
Hola,
he intentado ya varias instalaciones de Ubuntu 8.10 Intrepid Ibex, y he tenido siempre el mismo problema: después de un par de booteos, comienza durante el proceso de carga a informar que se ha perdido datos del disco rígido, hasta que finalmente termina por arruinarse la partición.
He hecho siempre la instalación con un cd grabado con la imagen descargada desde http://
La instalación la he intentado en un PC con procesador Phenom 9950, motherboard Asus M3N78-VM, 4Gb de RAM DDR2 Supertalent 800MHz, y un disco HD IDE de 160Gb.
La instalación la he intentado primero tratando de compartir el uso del disco con una partición para MS Windows XP (NTFS), una FAT 32 para intercambio de datos, una ext3 para el root de Ubuntu y una SWAP. Posteriormente a la aparición de perdida de datos sobre la partición ext3, decidí eliminar todos los s.o. del disco rigido e intentar una instalación de Ubunutu única en todo el disco, pero al cabo de un par de reinicios (voluntarios) del sistema, igualmente comenzaban a aparecer los problemas de pérdida de datos sobre la partición ext3.
encontré un reporte de un problema similar en https:/
aunque aún no encontré solución a este problema.
gracias.
Question information
- Language:
- Spanish Edit question
- Status:
- Solved
- For:
- Ubuntu Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Guillermo Belli
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Hacé una prueba de memoria con memtest, ya sea desde el CD de Ubuntu desde el menú de inicio luego de haber instalado Ubuntu, para descartar que no sea un problema de corrupción de datos por memoria RAM defectuosa.
Si la mmeoria está bien, pasale una prueba al disco duro con un programa de SMART del fabricante, que lo podrás bajar del fabricante del disco duro. Si no, podés usar este programa que es muy bueno: http://
Si no es RAM defectuoso, y el disco duro está bien, y en efecto es algún error del kernel con tu configuración de hardware y ext3, entonces deberías probar instalando en una partición ReiserFS en lugar de ext3.
Si es problema del ext3, reportalo al hilo que mencionaste:
https:/
Siempre es bueno reportar esos errores.
Saludos.
|
Revision history for this message
|
#2 |
2008/11/18 Guillermo Belli <email address hidden>
> Question #51844 on Ubuntu changed:
> https:/
>
> Status: Open => Answered
>
> Guillermo Belli proposed the following answer:
> Hacé una prueba de memoria con memtest, ya sea desde el CD de Ubuntu
> desde el menú de inicio luego de haber instalado Ubuntu, para descartar
> que no sea un problema de corrupción de datos por memoria RAM
> defectuosa.
>
> Si la mmeoria está bien, pasale una prueba al disco duro con un programa
> de SMART del fabricante, que lo podrás bajar del fabricante del disco
> duro. Si no, podés usar este programa que es muy bueno:
> http://
>
> Si no es RAM defectuoso, y el disco duro está bien, y en efecto es algún
> error del kernel con tu configuración de hardware y ext3, entonces
> deberías probar instalando en una partición ReiserFS en lugar de ext3.
>
> Si es problema del ext3, reportalo al hilo que mencionaste:
> https:/
>
> Siempre es bueno reportar esos errores.
>
> Saludos.
>
> --
> You received this question notification because you are a member of
> Equipo de Soporte de Ubuntu-Co, which is an answer contact for Ubuntu.
>
Adicional a todas estas pruebas deberias probar tambien que el CD no tenga
errores (lo haces desde e menu del Live CD), y que la suma MD5 de la imagen
iso no tenga problemas.
|
Revision history for this message
|
#3 |
Guillermo:
(gracias por responder tan rápido)
te comento sobre tus sugerencias:
Probe la RAM y no dio fallos.
Probe el CD de instalación y no dio fallos.
Le di formato a la partición root en ext2 (no probé aún ReiserFS) y tuve los mismos inconvenientes de perdida de datos en el segundo booteo.
Además, me olvidé de comentar otro detalle: cuando termina de bootear y el s.o está listo para trabajar, Ubuntu se queda frizado varias veces durante un par de segundos, en forma aleatoria.
Dado que tenía que poner a servir una base de datos mysql en forma urgente, instalé un XP con xampp, y le di formato a las particiones en NTFS y FAT32, como resultado, hasta ahora no apareció ningún error. Desde este s.o. verifiqué la integridad del disco y no apareció ningún error. Presumo entonces que el kernel de ubuntu 8.10 no está manejando bien a los discos IDE.
No me animé a postear un mensaje en el hilo que menciono en mi mensaje de más arriba, dado que mi inglés es muy básico. Igualmente hago el intento.
Gracias nuevamente...
|
Revision history for this message
|
#4 |
Pedro,
ext2 y ext3 son casi la misma cosa, así que es muy posible que usando ReiserFS no te de ese problema. Si te da problema, puede que sea algo con el controlador de disco, en ese caso escribí "dmesg" (esto es la bitácora del kernel) en una terminal y poné la salida aquí para analizar que está pasando.
Es muy probable también que tengas problemas con el ACPI (que puede ser otra posible causa de la corrupción de datos), así que es buena idea buscar alguna actualización para el BIOS de tu tarjeta madre.
|
Revision history for this message
|
#5 |
No me había fijado que el chipset de tu tarjeta madre es un GeForce 8200; resulta que hay varios reportes similares al tuyo en internet, y casualmente estaba ayudando aquí a otra persona con un problema similar, pero que le da error arrancar del CD.
Igual, dame la salida del "dmesg", y probá actualizando tu BIOS.
Saludos.
|
Revision history for this message
|
#6 |
Guillermo,
gracias nuevamente por las indicaciones y disculpas por mi demora, pero es
que aprovecho el fin de semana para ver si puedo darle solucion a esto.
te cuento que después de haber actualizado el Bios del motherboard, instalé
nuevamente ubuntu 8.1 (amd 64 bits) en una partición ext3 del disco IDE.
Anduvo todo OK hasta que le instalé los drivers propietarios de nvidia (la
versión 177). Allí comenzaron nuevamente los problemas de "frozen" y los
booteos fallidos.
tras varios reinicios fallidos, logre que uno booteara y me mostrara al
menos la consola, te transcribo parte del dmesg (ya que no me muestra todo
el log, supongo que por problemas de configuración de la terminal en gnome)
alli va una parte:
[ 5.312817] ata7.00: failed to set max address (err_mask=0x1)
[ 5.312820] ata7.00: device aborted resize (321672960 ->
184467440736956
[ 5.312824] ata7.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
[ 5.312826] ata7.00: 321672960 sectors, multi 16: LBA48
[ 5.312832] ata7.00: Drive reports diagnostics failure. This may indicate
a drive
[ 5.312833] ata7.00: fault or invalid emulation. Contact drive vendor for
information.
[ 5.312840] ata7.01: ATAPI: SONY CD-RW CRX225E, QYB1, max UDMA/33
[ 5.312848] ata7: nv_mode_filter: 0x7f39f&
(0xc7c00000) ACPI=0x7f01f (15:60:0x15)
[ 5.312852] ata7: nv_mode_filter: 0x739f&
(0xc7c00000) ACPI=0x701f (15:60:0x15)
[ 5.328590] ata7.00: configured for UDMA/133
[ 5.344565] ata7.01: configured for UDMA/33
[ 5.344594] ata8: port disabled. ignoring.
[ 5.344662] scsi 6:0:0:0: Direct-Access ATA HDT722516DLAT80
V43O PQ: 0 ANSI: 5
[ 5.344785] scsi 6:0:0:0: Attached scsi generic sg1 type 0
[ 5.358416] scsi 6:0:1:0: CD-ROM SONY CD-RW CRX225E
QYB1 PQ: 0 ANSI: 5
[ 5.358540] scsi 6:0:1:0: Attached scsi generic sg2 type 5
[ 5.370466] Driver 'sd' needs updating - please use bus_type methods
[ 5.384915] sd 6:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
MB)
[ 5.401184] sd 6:0:0:0: [sda] Write Protect is off
[ 5.401186] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.410401] sr1: scsi3-mmc drive: 43x/52x writer cd/rw xa/form2 cdda tray
[ 5.410423] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.410500] sr 6:0:1:0: Attached scsi CD-ROM sr1
[ 5.411527] sd 6:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
MB)
[ 5.411539] sd 6:0:0:0: [sda] Write Protect is off
[ 5.411540] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.411558] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.411561] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 5.515507] sd 6:0:0:0: [sda] Attached SCSI disk
[ 6.161897] PM: Starting manual resume from disk
[ 6.161900] PM: Resume from partition 8:7
[ 6.161901] PM: Checking hibernation image.
[ 6.162345] PM: Resume from disk failed.
[ 6.197561] kjournald starting. Commit interval 5 seconds
[ 6.197571] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.995235] udevd version 124 started
[ 11.219178] input: Power Button (FF) as
/devices/
[ 11.244534] ACPI: Power Button (FF) [PWRF]
[ 11.244638] input: Power Button (CM) as
/devices/
[ 11.276583] ACPI: Power Button (CM) [PWRB]
[ 11.494400] parport_pc 00:05: reported by Plug and Play ACPI
[ 11.494446] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 11.515810] ACPI: WMI: Mapper loaded
Gracias nuevamente por todo...
2008/11/20 Guillermo Belli <email address hidden>
> Your question #51844 on Ubuntu changed:
> https:/
>
> Guillermo Belli proposed the following answer:
> No me había fijado que el chipset de tu tarjeta madre es un GeForce
> 8200; resulta que hay varios reportes similares al tuyo en internet, y
> casualmente estaba ayudando aquí a otra persona con un problema similar,
> pero que le da error arrancar del CD.
>
> Igual, dame la salida del "dmesg", y probá actualizando tu BIOS.
>
> Saludos.
>
> --
> If this answers your question, please go to the following page to let us
> know that it is solved:
> https:/
>
> If you still need help, you can reply to this email or go to the
> following page to enter your feedback:
> https:/
>
> You received this question notification because you are a direct
> subscriber of the question.
>
|
Revision history for this message
|
#7 |
Pedro, que bueno que ya pudiste instalar Ubuntu.
Para poder enviarme la salida del "dmesg" completa, podés hacer lo siguiente:
dmesg > dmesg.txt
Eso guarda la salida del comando "dmesg" a un archivo llamado dmesg.txt, el cual podés copiar luego.
Yo creo que el problema con la tarjeta gŕafica es más relacionado a los drivers de nvidia, pero también puede estar relacionado con problemas de ACPI, solo lo sabremos con la salida del dmesg completa.
Podés probar cambiando unos parámetros del kernel, presionando la tecla "e" en el menu del grub sobre la opcion de ubuntu, ahi te saldrán varias líneas, te vas a la segunda, y presionás "e" nuevamente, te vas al final de la línea y quitale lo que dice "splash", luego presionas "enter" y luego "b" para bootear.
A veces el splash causa problemas, así que con esto lo desactivamos. Con la salida del "dmesg" veremos que otro problema hay.
|
Revision history for this message
|
#8 |
Guillermo,
nuevamente, disculpas por la demora, pero recien hoy me puse con el tema..
te cuento que estuve corriendo ubuntu sin problemas, hasta que le puse los
drivers propietarios de nvidia, allí comenzaron algunos problemas como
demoras en el booteo (se queda frizada la barra que muestra el avance del
booteo), la pantalla de salida (al apagar el PC) presenta errores gráficos
(en la mitad inferior, abajo de la barra que indica el progreso, aparecen
lineas y rayas del color naranja)..
en fin, te adjunto el dmesg...
saludos...
El 24 de noviembre de 2008 15:06, Guillermo Belli <
<email address hidden>> escribió:
> Your question #51844 on Ubuntu changed:
> https:/
>
> Status: Open => Answered
>
> Guillermo Belli proposed the following answer:
> Pedro, que bueno que ya pudiste instalar Ubuntu.
>
> Para poder enviarme la salida del "dmesg" completa, podés hacer lo
> siguiente:
>
> dmesg > dmesg.txt
>
> Eso guarda la salida del comando "dmesg" a un archivo llamado dmesg.txt,
> el cual podés copiar luego.
>
> Yo creo que el problema con la tarjeta gŕafica es más relacionado a los
> drivers de nvidia, pero también puede estar relacionado con problemas de
> ACPI, solo lo sabremos con la salida del dmesg completa.
>
> Podés probar cambiando unos parámetros del kernel, presionando la tecla
> "e" en el menu del grub sobre la opcion de ubuntu, ahi te saldrán varias
> líneas, te vas a la segunda, y presionás "e" nuevamente, te vas al final
> de la línea y quitale lo que dice "splash", luego presionas "enter" y
> luego "b" para bootear.
>
> A veces el splash causa problemas, así que con esto lo desactivamos. Con
> la salida del "dmesg" veremos que otro problema hay.
>
> --
> If this answers your question, please go to the following page to let us
> know that it is solved:
> https:/
>
> If you still need help, you can reply to this email or go to the
> following page to enter your feedback:
> https:/
>
> You received this question notification because you are a direct
> subscriber of the question.
>
|
Revision history for this message
|
#9 |
paso el dmesg completo así, ya que no pude adjuntarlo como archivo..
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu 2.6.27-
[ 0.000000] Command line: root=UUID=
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbf90000 (usable)
[ 0.000000] BIOS-e820: 00000000dbf90000 - 00000000dbf9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dbf9e000 - 00000000dbfe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dbfe0000 - 00000000dbfee000 (reserved)
[ 0.000000] BIOS-e820: 00000000dbff0000 - 00000000dc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xdbf90 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00dbe00000 page 2M
[ 0.000000] 00dbe00000 - 00dbf90000 page 4k
[ 0.000000] kernel direct mapping tables up to dbf90000 @ 8000-e000
[ 0.000000] last_map_addr: dbf90000 end: dbf90000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[ 0.000000] last_map_addr: 120000000 end: 120000000
[ 0.000000] RAMDISK: 377b4000 - 37fef87a
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FB590, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT DBF90000, 0044 (r1 101508 RSDT1157 20081015 MSFT 97)
[ 0.000000] ACPI: FACP DBF90200, 0084 (r1 101508 FACP1157 20081015 MSFT 97)
[ 0.000000] ACPI: DSDT DBF90450, AE9D (r1 A1041 A1041000 0 INTL 20051117)
[ 0.000000] ACPI: FACS DBF9E000, 0040
[ 0.000000] ACPI: APIC DBF90390, 0080 (r1 101508 APIC1157 20081015 MSFT 97)
[ 0.000000] ACPI: MCFG DBF90410, 003C (r1 101508 OEMMCFG 20081015 MSFT 97)
[ 0.000000] ACPI: OEMB DBF9E040, 0072 (r1 101508 OEMB1157 20081015 MSFT 97)
[ 0.000000] ACPI: HPET DBF9B2F0, 0038 (r1 101508 OEMHPET0 20081015 MSFT 97)
[ 0.000000] ACPI: INFO DBF9E0C0, 0124 (r1 101508 AMDINFO 20081015 MSFT 97)
[ 0.000000] ACPI: NVHD DBF9E1F0, 0284 (r1 101508 NVHDCP 20081015 MSFT 97)
[ 0.000000] ACPI: SSDT DBF9B330, 0544 (r1 A_M_I_ POWERNOW 1 AMD 1)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Bootmem setup node 0 000000000000000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [000000000000d000 - 0000000000030fff] pages 24
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c]
[ 0.000000] #3 [00377b4000 - 0037fef87a] RAMDISK ==> [00377b4000 - 0037fef87a]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe200000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dbf90
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1031982
[ 0.000000] DMA zone: 2107 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 880592 pages, LIFO batch:31
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dbf90000 - 00000000dbf9e000
[ 0.000000] PM: Registered nosave memory: 00000000dbf9e000 - 00000000dbfe0000
[ 0.000000] PM: Registered nosave memory: 00000000dbfe0000 - 00000000dbfee000
[ 0.000000] PM: Registered nosave memory: 00000000dbfee000 - 00000000dbff0000
[ 0.000000] PM: Registered nosave memory: 00000000dbff0000 - 00000000dc000000
[ 0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: dc000000:22c00000)
[ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1011723
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2599.948 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 4ba6000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 3981032k/4718592k available (3112k kernel code, 146896k reserved, 1575k data, 536k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.88 BogoMIPS (lpj=10399776)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 0/0 -> Node 0
[ 0.004000] tseg: 0000000000
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] ACPI: Core revision 20080609
[ 0.007163] ACPI: Checking initramfs for custom DSDT
[ 0.263756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.303460] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.303463] Using local APIC timer interrupts.
[ 0.304020] APIC timer calibration result 12499742
[ 0.304021] Detected 12.499 MHz APIC timer.
[ 0.304123] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5200.14 BogoMIPS (lpj=10400292)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.392336] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.392346] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.396044] System has AMD C1E enabled
[ 0.396055] Switch to broadcast mode on CPU1
[ 0.396090] Booting processor 2/2 ip 6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5200.02 BogoMIPS (lpj=10400057)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 2/2 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.484368] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.484377] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.488051] Switch to broadcast mode on CPU2
[ 0.488098] Booting processor 3/3 ip 6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5200.02 BogoMIPS (lpj=10400044)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 3/3 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.576361] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.576371] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.580051] Brought up 4 CPUs
[ 0.580053] Total of 4 processors activated (20800.08 BogoMIPS).
[ 0.580055] Switch to broadcast mode on CPU3
[ 0.580129] CPU0 attaching sched-domain:
[ 0.580132] domain 0: span 0-3 level CPU
[ 0.580133] groups: 0 1 2 3
[ 0.580137] domain 1: span 0-3 level NODE
[ 0.580138] groups: 0-3
[ 0.580142] CPU1 attaching sched-domain:
[ 0.580143] domain 0: span 0-3 level CPU
[ 0.580144] groups: 1 2 3 0
[ 0.580147] domain 1: span 0-3 level NODE
[ 0.580148] groups: 0-3
[ 0.580151] CPU2 attaching sched-domain:
[ 0.580152] domain 0: span 0-3 level CPU
[ 0.580153] groups: 2 3 0 1
[ 0.580156] domain 1: span 0-3 level NODE
[ 0.580157] groups: 0-3
[ 0.580160] CPU3 attaching sched-domain:
[ 0.580161] domain 0: span 0-3 level CPU
[ 0.580162] groups: 3 0 1 2
[ 0.580165] domain 1: span 0-3 level NODE
[ 0.580166] groups: 0-3
[ 0.580266] Switch to broadcast mode on CPU0
[ 0.580266] net_namespace: 1552 bytes
[ 0.580266] Booting paravirtualized kernel on bare hardware
[ 0.580293] Time: 21:54:41 Date: 11/27/08
[ 0.580317] NET: Registered protocol family 16
[ 0.580333] node 0 link 0: io port [5000, ffffff]
[ 0.580333] node 0 link 0: io port [1000, 1fff]
[ 0.580333] TOM: 00000000e0000000 aka 3584M
[ 0.580333] Fam 10h mmconf [e0000000, efffffff]
[ 0.580333] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.580333] node 0 link 0: mmio [a0000, bffff]
[ 0.580333] node 0 link 0: mmio [e0000000, fe0bffff] ==> [f0000000, fe0bffff]
[ 0.580333] TOM2: 0000000120000000 aka 4608M
[ 0.580333] bus: [00,07] on node 0 link 0
[ 0.580333] bus: 00 index 0 io port: [2000, ffff]
[ 0.580333] bus: 00 index 1 io port: [0, 1fff]
[ 0.580333] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.580333] bus: 00 index 3 mmio: [f0000000, ffffffff]
[ 0.580333] bus: 00 index 4 mmio: [120000000, fcffffffff]
[ 0.580333] ACPI: bus type pci registered
[ 0.580333] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.580333] PCI: Not using MMCONFIG.
[ 0.580333] PCI: Using configuration type 1 for base access
[ 0.580333] PCI: Using configuration type 1 for extended access
[ 0.580333] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.580333] mtrr: probably your BIOS does not setup all CPUs.
[ 0.580333] mtrr: corrected configuration.
[ 0.581021] ACPI: EC: Look up EC in DSDT
[ 0.604323] ACPI: Interpreter enabled
[ 0.604325] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.604340] ACPI: Using IOAPIC for interrupt routing
[ 0.604422] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.616881] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.627327] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.648288] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.648288] PCI: 0000:00:01.0 reg 10 io port: [900, 9ff]
[ 0.648288] PCI: 0000:00:01.1 reg 10 io port: [e00, e3f]
[ 0.648288] PCI: 0000:00:01.1 reg 20 io port: [600, 63f]
[ 0.648288] PCI: 0000:00:01.1 reg 24 io port: [700, 73f]
[ 0.648288] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.648290] pci 0000:00:01.1: PME# disabled
[ 0.648338] PCI: 0000:00:01.3 reg 10 32bit mmio: [fce80000, fcefffff]
[ 0.648457] PCI: 0000:00:02.0 reg 10 32bit mmio: [fce7e000, fce7efff]
[ 0.648477] pci 0000:00:02.0: supports D1
[ 0.648478] pci 0000:00:02.0: supports D2
[ 0.648479] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648481] pci 0000:00:02.0: PME# disabled
[ 0.648499] PCI: 0000:00:02.1 reg 10 32bit mmio: [fce7fc00, fce7fcff]
[ 0.648522] pci 0000:00:02.1: supports D1
[ 0.648523] pci 0000:00:02.1: supports D2
[ 0.648524] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648527] pci 0000:00:02.1: PME# disabled
[ 0.648547] PCI: 0000:00:04.0 reg 10 32bit mmio: [fce7d000, fce7dfff]
[ 0.648566] pci 0000:00:04.0: supports D1
[ 0.648567] pci 0000:00:04.0: supports D2
[ 0.648569] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648571] pci 0000:00:04.0: PME# disabled
[ 0.648589] PCI: 0000:00:04.1 reg 10 32bit mmio: [fce7f800, fce7f8ff]
[ 0.648612] pci 0000:00:04.1: supports D1
[ 0.648613] pci 0000:00:04.1: supports D2
[ 0.648614] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648617] pci 0000:00:04.1: PME# disabled
[ 0.648644] PCI: 0000:00:06.0 reg 20 io port: [ffa0, ffaf]
[ 0.648675] PCI: 0000:00:07.0 reg 10 32bit mmio: [fce78000, fce7bfff]
[ 0.648697] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.648700] pci 0000:00:07.0: PME# disabled
[ 0.648740] PCI: 0000:00:09.0 reg 10 io port: [d480, d487]
[ 0.648742] PCI: 0000:00:09.0 reg 14 io port: [d400, d403]
[ 0.648745] PCI: 0000:00:09.0 reg 18 io port: [d080, d087]
[ 0.648748] PCI: 0000:00:09.0 reg 1c io port: [d000, d003]
[ 0.648751] PCI: 0000:00:09.0 reg 20 io port: [cc00, cc0f]
[ 0.648753] PCI: 0000:00:09.0 reg 24 32bit mmio: [fce76000, fce77fff]
[ 0.648784] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648786] pci 0000:00:0b.0: PME# disabled
[ 0.648957] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648964] pci 0000:00:10.0: PME# disabled
[ 0.649132] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.649144] pci 0000:00:12.0: PME# disabled
[ 0.652072] PCI: 0000:01:07.0 reg 10 32bit mmio: [fcff8000, fcffffff]
[ 0.652124] pci 0000:00:08.0: transparent bridge
[ 0.652127] PCI: bridge 0000:00:08.0 32bit mmio: [fcf00000, fcffffff]
[ 0.652143] PCI: 0000:02:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 0.652146] PCI: 0000:02:00.0 reg 14 32bit mmio: [f0000000, f7ffffff]
[ 0.652150] PCI: 0000:02:00.0 reg 1c 32bit mmio: [fa000000, fbffffff]
[ 0.652155] PCI: 0000:02:00.0 reg 24 io port: [ec00, ec7f]
[ 0.652158] PCI: 0000:02:00.0 reg 30 32bit mmio: [febe0000, febfffff]
[ 0.652177] PCI: bridge 0000:00:0b.0 io port: [e000, efff]
[ 0.652179] PCI: bridge 0000:00:0b.0 32bit mmio: [fd000000, febfffff]
[ 0.652182] PCI: bridge 0000:00:0b.0 64bit mmio pref: [f0000000, fbffffff]
[ 0.652349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.652824] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.653015] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.653160] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.653326] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.676386] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.676801] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[ 0.677205] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.677617] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.678028] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.678434] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.678846] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.679248] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.680218] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.680622] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.681031] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.681439] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.681851] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.682259] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.682668] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.683082] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.683490] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[ 0.683894] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.684307] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.684716] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.685124] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 0.685530] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.685941] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.686350] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.686759] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.687172] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.687581] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.687990] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.688425] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.688828] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.689243] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.689652] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.690061] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.690471] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.690881] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.691290] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.691701] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.692116] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[ 0.692525] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.692939] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[ 0.693351] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
[ 0.693764] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.694176] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 0.694589] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.695075] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.695488] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
[ 0.695896] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.696078] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - AE, should be A1 [20080609]
[ 0.696170] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.696177] pnp: PnP ACPI init
[ 0.696177] ACPI: bus type pnp registered
[ 0.700673] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.700675] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.711103] pnp: PnP ACPI: found 15 devices
[ 0.711105] ACPI: ACPI bus type pnp unregistered
[ 0.711119] PCI: Using ACPI for IRQ routing
[ 0.732038] NET: Registered protocol family 8
[ 0.732040] NET: Registered protocol family 20
[ 0.732050] NetLabel: Initializing
[ 0.732050] NetLabel: domain hash size = 128
[ 0.732050] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.732050] NetLabel: unlabeled traffic allowed by default
[ 0.732178] PCI-DMA: Disabling AGP.
[ 0.732586] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.732586] PCI-DMA: using GART IOMMU.
[ 0.732586] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.733372] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.733377] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.736049] Switched to high resolution mode on CPU 0
[ 0.736057] Switched to high resolution mode on CPU 3
[ 0.736059] Switched to high resolution mode on CPU 1
[ 0.736062] Switched to high resolution mode on CPU 2
[ 0.737571] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.737573] actual entries 65586
[ 0.737653] AppArmor: AppArmor Filesystem Enabled
[ 0.737682] ACPI: RTC can wake from S4
[ 0.752343] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.752345] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.752347] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.752349] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.752351] system 00:06: ioport range 0x800-0x87f could not be reserved
[ 0.752353] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.752355] system 00:06: ioport range 0xd00-0xd7f has been reserved
[ 0.752356] system 00:06: ioport range 0xd80-0xdff has been reserved
[ 0.752360] system 00:06: iomem range 0xfed04000-
[ 0.752361] system 00:06: iomem range 0xfee01000-
[ 0.752368] system 00:09: iomem range 0xfec00000-
[ 0.752369] system 00:09: iomem range 0xfee00000-
[ 0.752371] system 00:09: iomem range 0xdc000000-
[ 0.752376] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.752378] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.752380] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.752381] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.752386] system 00:0d: iomem range 0xe0000000-
[ 0.752391] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.752393] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.752394] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.752396] system 00:0e: iomem range 0x100000-0xdfffffff could not be reserved
[ 0.752398] system 00:0e: iomem range 0xfed45000-
[ 0.757454] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.757456] pci 0000:00:08.0: IO window: disabled
[ 0.757460] pci 0000:00:08.0: MEM window: 0xfcf00000-
[ 0.757462] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.757466] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.757468] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.757470] pci 0000:00:0b.0: MEM window: 0xfd000000-
[ 0.757472] pci 0000:00:0b.0: PREFETCH window: 0x000000f000000
[ 0.757475] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.757477] pci 0000:00:10.0: IO window: disabled
[ 0.757485] pci 0000:00:10.0: MEM window: disabled
[ 0.757492] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.757504] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
[ 0.757505] pci 0000:00:12.0: IO window: disabled
[ 0.757515] pci 0000:00:12.0: MEM window: disabled
[ 0.757521] pci 0000:00:12.0: PREFETCH window: disabled
[ 0.757537] pci 0000:00:08.0: setting latency timer to 64
[ 0.757542] pci 0000:00:0b.0: setting latency timer to 64
[ 0.758107] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.758117] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.758124] pci 0000:00:10.0: setting latency timer to 64
[ 0.758658] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.758664] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[ 0.758671] pci 0000:00:12.0: setting latency timer to 64
[ 0.758676] bus: 00 index 0 io port: [0, ffff]
[ 0.758677] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.758679] bus: 01 index 0 mmio: [0, 0]
[ 0.758680] bus: 01 index 1 mmio: [fcf00000, fcffffff]
[ 0.758681] bus: 01 index 2 mmio: [0, 0]
[ 0.758683] bus: 01 index 3 io port: [0, ffff]
[ 0.758684] bus: 01 index 4 mmio: [0, ffffffffffffffff]
[ 0.758687] bus: 02 index 0 io port: [e000, efff]
[ 0.758689] bus: 02 index 1 mmio: [fd000000, febfffff]
[ 0.758690] bus: 02 index 2 mmio: [f0000000, fbffffff]
[ 0.758691] bus: 02 index 3 mmio: [0, 0]
[ 0.758692] bus: 03 index 0 mmio: [0, 0]
[ 0.758693] bus: 03 index 1 mmio: [0, 0]
[ 0.758694] bus: 03 index 2 mmio: [0, 0]
[ 0.758695] bus: 03 index 3 mmio: [0, 0]
[ 0.758697] bus: 04 index 0 mmio: [0, 0]
[ 0.758698] bus: 04 index 1 mmio: [0, 0]
[ 0.758699] bus: 04 index 2 mmio: [0, 0]
[ 0.758700] bus: 04 index 3 mmio: [0, 0]
[ 0.758710] NET: Registered protocol family 2
[ 0.796155] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.797200] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.799725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.800065] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.800068] TCP reno registered
[ 0.812402] NET: Registered protocol family 1
[ 0.812500] checking if image is initramfs... it is
[ 1.321953] Freeing initrd memory: 8430k freed
[ 1.326209] audit: initializing netlink socket (disabled)
[ 1.326220] type=2000 audit(122782288
[ 1.330466] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.332805] VFS: Disk quotas dquot_6.5.1
[ 1.332878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.332961] msgmni has been set to 7791
[ 1.333064] io scheduler noop registered
[ 1.333066] io scheduler anticipatory registered
[ 1.333067] io scheduler deadline registered
[ 1.333172] io scheduler cfq registered (default)
[ 1.400235] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.400264] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.400292] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.400319] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.400374] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.400439] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 1.400482] pci 0000:02:00.0: Boot video device
[ 1.400614] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 1.400778] pcieport-driver 0000:00:10.0: found MSI capability
[ 1.400891] pci_express 0000:00:
[ 1.401134] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 1.401297] pcieport-driver 0000:00:12.0: found MSI capability
[ 1.401406] pci_express 0000:00:
[ 1.433382] hpet_resources: 0xfed00000 is busy
[ 1.433476] Linux agpgart interface v0.103
[ 1.433480] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.433612] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.434183] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.435665] brd: module loaded
[ 1.435725] input: Macintosh mouse button emulation as /devices/
[ 1.435821] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.435823] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.435943] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.452433] mice: PS/2 mouse device common for all mice
[ 1.452537] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.452593] rtc0: alarms up to one year, y3k, hpet irqs
[ 1.452626] cpuidle: using governor ladder
[ 1.452628] cpuidle: using governor menu
[ 1.452947] TCP cubic registered
[ 1.453133] registered taskstats version 1
[ 1.453238] Magic number: 0:181:956
[ 1.453269] tty ptyzd: hash matches
[ 1.453301] pci 0000:00:04.0: hash matches
[ 1.453378] rtc_cmos 00:08: setting system clock to 2008-11-27 21:54:41 UTC (1227822881)
[ 1.453380] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.453382] EDD information not available.
[ 1.453422] Freeing unused kernel memory: 536k freed
[ 1.453619] Write protecting the kernel read-only data: 4348k
[ 1.468087] input: AT Translated Set 2 keyboard as /devices/
[ 1.587107] fuse init (API version 7.9)
[ 1.601781] processor ACPI0007:00: registered as cooling_device0
[ 1.601838] processor ACPI0007:01: registered as cooling_device1
[ 1.601889] processor ACPI0007:02: registered as cooling_device2
[ 1.601943] processor ACPI0007:03: registered as cooling_device3
[ 1.808336] usbcore: registered new interface driver usbfs
[ 1.808354] usbcore: registered new interface driver hub
[ 1.808382] usbcore: registered new device driver usb
[ 1.809786] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.810366] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.810377] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 1.810388] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.810390] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.810429] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 1.810457] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfce7e000
[ 1.822674] No dock devices found.
[ 1.860323] SCSI subsystem initialized
[ 1.867628] usb usb1: configuration #1 chosen from 1 choice
[ 1.867650] hub 1-0:1.0: USB hub found
[ 1.867658] hub 1-0:1.0: 6 ports detected
[ 1.870478] libata version 3.00 loaded.
[ 2.115951] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22
[ 2.115996] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22
[ 2.116026] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 2.116043] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 2.116078] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 2.116192] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfce7d000
[ 2.170259] usb usb2: configuration #1 chosen from 1 choice
[ 2.170282] hub 2-0:1.0: USB hub found
[ 2.170291] hub 2-0:1.0: 6 ports detected
[ 2.232117] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 2.377258] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 2.377301] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 2.377330] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 2.377341] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.377380] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 2.377511] ehci_hcd 0000:00:02.1: debug port 1
[ 2.377556] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 2.377583] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfce7fc00
[ 2.420050] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.420141] usb usb3: configuration #1 chosen from 1 choice
[ 2.420164] hub 3-0:1.0: USB hub found
[ 2.420170] hub 3-0:1.0: 6 ports detected
[ 2.629672] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 2.629682] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
[ 2.629691] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 2.629693] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 2.629716] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
[ 2.629736] ehci_hcd 0000:00:04.1: debug port 1
[ 2.629740] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 2.629754] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfce7f800
[ 2.640343] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.640414] usb usb4: configuration #1 chosen from 1 choice
[ 2.640434] hub 4-0:1.0: USB hub found
[ 2.640439] hub 4-0:1.0: 6 ports detected
[ 2.817635] usb 1-3: device not accepting address 2, error -62
[ 2.849164] pata_amd 0000:00:06.0: version 0.3.10
[ 2.849200] pata_amd 0000:00:06.0: setting latency timer to 64
[ 2.849286] scsi0 : pata_amd
[ 2.850142] scsi1 : pata_amd
[ 2.851605] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.851607] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.872114] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 3.205710] ata1.00: failed to set max address (err_mask=0x1)
[ 3.205713] ata1.00: device aborted resize (321672960 -> 184467440736956
[ 3.205718] ata1.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
[ 3.205720] ata1.00: 321672960 sectors, multi 16: LBA48
[ 3.205726] ata1.00: Drive reports diagnostics failure. This may indicate a drive
[ 3.205727] ata1.00: fault or invalid emulation. Contact drive vendor for information.
[ 3.205735] ata1.01: ATAPI: SONY CD-RW CRX225E, QYB1, max UDMA/33
[ 3.205744] ata1: nv_mode_filter: 0x7f39f&
[ 3.205748] ata1: nv_mode_filter: 0x739f&
[ 3.220265] ata1.00: configured for UDMA/133
[ 3.236325] ata1.01: configured for UDMA/33
[ 3.236364] ata2: port disabled. ignoring.
[ 3.236454] scsi 0:0:0:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5
[ 3.238267] scsi 0:0:1:0: CD-ROM SONY CD-RW CRX225E QYB1 PQ: 0 ANSI: 5
[ 3.239534] ahci 0000:00:09.0: version 3.0
[ 3.240096] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 3.240099] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 3.240176] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 3.240179] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 3.240181] ahci 0000:00:09.0: setting latency timer to 64
[ 3.240453] scsi2 : ahci
[ 3.240522] scsi3 : ahci
[ 3.240571] scsi4 : ahci
[ 3.240620] scsi5 : ahci
[ 3.240667] scsi6 : ahci
[ 3.240712] scsi7 : ahci
[ 3.240789] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 2301
[ 3.240791] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 2301
[ 3.240793] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 2301
[ 3.240795] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 2301
[ 3.240796] ata7: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 2301
[ 3.240798] ata8: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 2301
[ 3.480117] usb 4-1: new high speed USB device using ehci_hcd and address 2
[ 3.560323] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.617843] usb 4-1: configuration #1 chosen from 1 choice
[ 3.880189] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.976147] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 4.185972] usb 2-3: configuration #1 chosen from 1 choice
[ 4.364175] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.367612] ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 4.371744] ata5.00: configured for UDMA/100
[ 4.492158] usb 1-3: new full speed USB device using ohci_hcd and address 4
[ 4.688075] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.706354] usb 1-3: configuration #1 chosen from 1 choice
[ 5.008258] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.328328] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.331492] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
[ 5.356229] usbcore: registered new interface driver hiddev
[ 5.360463] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.360493] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 5.360528] scsi 4:0:0:0: Attached scsi generic sg2 type 5
[ 5.362400] input: USB Mouse as /devices/
[ 5.370937] Driver 'sd' needs updating - please use bus_type methods
[ 5.371020] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[ 5.371032] sd 0:0:0:0: [sda] Write Protect is off
[ 5.371034] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.371055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.371110] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[ 5.371120] sd 0:0:0:0: [sda] Write Protect is off
[ 5.371122] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.371139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.371145] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 5.381182] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:04.0-3
[ 5.381200] usbcore: registered new interface driver usbhid
[ 5.381203] usbhid: v2.6:USB HID core driver
[ 5.385115] sda1 sda2 < sda5 sda6 sda7 >
[ 5.425035] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.426138] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 5.426141] Uniform CD-ROM driver Revision: 3.20
[ 5.426203] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 5.644646] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.644729] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 6.365982] PM: Starting manual resume from disk
[ 6.365985] PM: Resume from partition 8:7
[ 6.365986] PM: Checking hibernation image.
[ 6.366414] PM: Resume from disk failed.
[ 6.402449] kjournald starting. Commit interval 5 seconds
[ 6.402465] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.598742] udevd version 124 started
[ 11.807814] input: Power Button (FF) as /devices/
[ 11.829550] ACPI: Power Button (FF) [PWRF]
[ 11.829652] input: Power Button (CM) as /devices/
[ 11.861525] ACPI: Power Button (CM) [PWRB]
[ 12.133447] ACPI: WMI: Mapper loaded
[ 12.341410] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.346529] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.390635] parport_pc 00:05: reported by Plug and Play ACPI
[ 12.390681] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 12.401830] input: PC Speaker as /devices/
[ 12.413247] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2C17
[ 12.413268] usbcore: registered new interface driver usblp
[ 12.821679] nvidia: module license 'NVIDIA' taints kernel.
[ 13.075284] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
[ 13.075289] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22
[ 13.075294] nvidia 0000:02:00.0: setting latency timer to 64
[ 13.075427] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008
[ 17.334403] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[ 17.334414] rt61pci 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
[ 17.341358] phy0: Selected rate control algorithm 'pid'
[ 21.059814] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 21.059818] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 21.059822] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 21.059825] end_request: I/O error, dev sr0, sector 76360
[ 21.059829] Buffer I/O error on device sr0, logical block 9545
[ 22.847983] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 22.847985] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 22.847988] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 22.847990] end_request: I/O error, dev sr0, sector 76360
[ 22.847992] Buffer I/O error on device sr0, logical block 9545
[ 24.600539] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 24.600544] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 24.600547] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 24.600550] end_request: I/O error, dev sr0, sector 76360
[ 24.600554] Buffer I/O error on device sr0, logical block 9545
[ 26.351571] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 26.351574] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 26.351576] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 26.351578] end_request: I/O error, dev sr0, sector 76360
[ 26.351580] Buffer I/O error on device sr0, logical block 9545
[ 28.138071] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 28.138075] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 28.138078] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 28.138080] end_request: I/O error, dev sr0, sector 76360
[ 28.138084] Buffer I/O error on device sr0, logical block 9545
[ 29.889058] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 29.889061] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 29.889063] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 29.889065] end_request: I/O error, dev sr0, sector 76360
[ 29.889067] Buffer I/O error on device sr0, logical block 9545
[ 31.676741] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 31.676744] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 31.676747] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 31.676750] end_request: I/O error, dev sr0, sector 76360
[ 31.676753] Buffer I/O error on device sr0, logical block 9545
[ 33.606897] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 33.606902] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 33.606905] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 33.606909] end_request: I/O error, dev sr0, sector 76360
[ 33.606913] Buffer I/O error on device sr0, logical block 9545
[ 35.395129] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
[ 35.395133] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
[ 35.395135] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 35.395138] end_request: I/O error, dev sr0, sector 76360
[ 35.395142] Buffer I/O error on device sr0, logical block 9545
[ 35.806983] Registered led device: rt61pci-phy0:radio
[ 35.806995] Registered led device: rt61pci-phy0:assoc
[ 35.961389] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 35.961938] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 35.961941] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 35.961956] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 35.992349] hda-intel: no codecs initialized
[ 35.992383] HDA Intel 0000:00:07.0: PCI INT A disabled
[ 36.597838] lp0: using parport0 (interrupt-driven).
[ 36.726834] Adding 1060248k swap on /dev/sda7. Priority:-1 extents:1 across:1060248k
[ 37.273487] EXT3 FS on sda6, internal journal
[ 38.274743] type=1505 audit(122783011
[ 38.395648] type=1505 audit(122783011
[ 38.395785] type=1505 audit(122783011
[ 38.519659] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.229147] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
[ 39.229185] powernow-k8: 0 : pstate 0 (2600 MHz)
[ 39.229188] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 39.840551] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 40.026262] ppdev: user-space parallel port driver
[ 44.000344] Bluetooth: Core ver 2.13
[ 44.000466] NET: Registered protocol family 31
[ 44.000470] Bluetooth: HCI device and connection manager initialized
[ 44.000474] Bluetooth: HCI socket layer initialized
[ 44.021226] Bluetooth: L2CAP ver 2.11
[ 44.021239] Bluetooth: L2CAP socket layer initialized
[ 44.058383] Bluetooth: SCO (Voice Link) ver 0.6
[ 44.058390] Bluetooth: SCO socket layer initialized
[ 44.129315] Bluetooth: RFCOMM socket layer initialized
[ 44.129335] Bluetooth: RFCOMM TTY layer initialized
[ 44.129338] Bluetooth: RFCOMM ver 1.10
[ 44.156216] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.156224] Bluetooth: BNEP filters: protocol multicast
[ 44.190241] Bridge firewalling registered
[ 44.190478] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 48.295618] firmware: requesting rt2561s.bin
[ 48.640853] NET: Registered protocol family 17
[ 67.486550] cdrom: sr0: mrw address space DMA selected
[ 68.386986] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 68.395883] ISOFS: changing to secondary root
[ 118.199450] NET: Registered protocol family 10
[ 118.200235] lo: Disabled Privacy Extensions
[ 118.201322] ADDRCONF(
[ 142.128821] ppdev0: registered pardevice
[ 142.176536] ppdev0: unregistered pardevice
[ 142.186151] ppdev0: registered pardevice
[ 142.232339] ppdev0: unregistered pardevice
[ 142.621038] ppdev0: registered pardevice
[ 142.668267] ppdev0: unregistered pardevice
[ 154.928079] wlan0: authenticate with AP 00:03:2f:39:8c:88
[ 154.929596] wlan0: authenticated
[ 154.929607] wlan0: associate with AP 00:03:2f:39:8c:88
[ 154.932963] wlan0: RX AssocResp from 00:03:2f:39:8c:88 (capab=0x431 status=0 aid=2)
[ 154.932969] wlan0: associated
[ 154.934395] ADDRCONF(
[ 165.568407] wlan0: no IPv6 routers present
|
Revision history for this message
|
#10 |
Si esa pc la armaste por tu cuenta, si puedes abrir el gabinete y
fijarte de poner al disco rigido en una manguera independiente a otras
unidades, a su vez fijate de probar con otro cable ide. que este en el
primer lugar, y luego probar sin lectoras a ver si el problema
continua. A mi me pasaba que a veces no iniciaba y era problema de los
cables, y de como iban conectados generalmente debes usar uno solo
(ademas de que le da mas velocidad si esta independiente) no creo que
los driver nvidia tengan algo que ver solo seria una casualidad.
Tambien debes probar disco rigido solo, y placa de video y un par de
memorias. Entonces comprueba como esta conectado el ide.
2008/11/27 Pedro <email address hidden>:
> Question #51844 on Ubuntu changed:
> https:/
>
> Pedro gave more information on the question:
> paso el dmesg completo así, ya que no pude adjuntarlo como archivo..
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu 2.6.27-
> [ 0.000000] Command line: root=UUID=
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbf90000 (usable)
> [ 0.000000] BIOS-e820: 00000000dbf90000 - 00000000dbf9e000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000dbf9e000 - 00000000dbfe0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000dbfe0000 - 00000000dbfee000 (reserved)
> [ 0.000000] BIOS-e820: 00000000dbff0000 - 00000000dc000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
> [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
> [ 0.000000] last_pfn = 0xdbf90 max_arch_pfn = 0x3ffffffff
> [ 0.000000] init_memory_mapping
> [ 0.000000] 0000000000 - 00dbe00000 page 2M
> [ 0.000000] 00dbe00000 - 00dbf90000 page 4k
> [ 0.000000] kernel direct mapping tables up to dbf90000 @ 8000-e000
> [ 0.000000] last_map_addr: dbf90000 end: dbf90000
> [ 0.000000] init_memory_mapping
> [ 0.000000] 0100000000 - 0120000000 page 2M
> [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
> [ 0.000000] last_map_addr: 120000000 end: 120000000
> [ 0.000000] RAMDISK: 377b4000 - 37fef87a
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP 000FB590, 0014 (r0 ACPIAM)
> [ 0.000000] ACPI: RSDT DBF90000, 0044 (r1 101508 RSDT1157 20081015 MSFT 97)
> [ 0.000000] ACPI: FACP DBF90200, 0084 (r1 101508 FACP1157 20081015 MSFT 97)
> [ 0.000000] ACPI: DSDT DBF90450, AE9D (r1 A1041 A1041000 0 INTL 20051117)
> [ 0.000000] ACPI: FACS DBF9E000, 0040
> [ 0.000000] ACPI: APIC DBF90390, 0080 (r1 101508 APIC1157 20081015 MSFT 97)
> [ 0.000000] ACPI: MCFG DBF90410, 003C (r1 101508 OEMMCFG 20081015 MSFT 97)
> [ 0.000000] ACPI: OEMB DBF9E040, 0072 (r1 101508 OEMB1157 20081015 MSFT 97)
> [ 0.000000] ACPI: HPET DBF9B2F0, 0038 (r1 101508 OEMHPET0 20081015 MSFT 97)
> [ 0.000000] ACPI: INFO DBF9E0C0, 0124 (r1 101508 AMDINFO 20081015 MSFT 97)
> [ 0.000000] ACPI: NVHD DBF9E1F0, 0284 (r1 101508 NVHDCP 20081015 MSFT 97)
> [ 0.000000] ACPI: SSDT DBF9B330, 0544 (r1 A_M_I_ POWERNOW 1 AMD 1)
> [ 0.000000] Scanning NUMA topology in Northbridge 24
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 000000000000000
> [ 0.000000] Bootmem setup node 0 000000000000000
> [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
> [ 0.000000] bootmap [000000000000d000 - 0000000000030fff] pages 24
> [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c]
> [ 0.000000] #3 [00377b4000 - 0037fef87a] RAMDISK ==> [00377b4000 - 0037fef87a]
> [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
> [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
> [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
> [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
> [ 0.000000] [ffffe200000000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00120000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009e
> [ 0.000000] 0: 0x00000100 -> 0x000dbf90
> [ 0.000000] 0: 0x00100000 -> 0x00120000
> [ 0.000000] On node 0 totalpages: 1031982
> [ 0.000000] DMA zone: 2107 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 880592 pages, LIFO batch:31
> [ 0.000000] Normal zone: 129024 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x508
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] ACPI: IRQ14 used by override.
> [ 0.000000] ACPI: IRQ15 used by override.
> [ 0.000000] Setting APIC routing to flat
> [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
> [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000dbf90000 - 00000000dbf9e000
> [ 0.000000] PM: Registered nosave memory: 00000000dbf9e000 - 00000000dbfe0000
> [ 0.000000] PM: Registered nosave memory: 00000000dbfe0000 - 00000000dbfee000
> [ 0.000000] PM: Registered nosave memory: 00000000dbfee000 - 00000000dbff0000
> [ 0.000000] PM: Registered nosave memory: 00000000dbff0000 - 00000000dc000000
> [ 0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
> [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
> [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
> [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
> [ 0.000000] Allocating PCI resources starting at e0000000 (gap: dc000000:22c00000)
> [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1011723
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: root=UUID=
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
> [ 0.000000] TSC: using PIT calibration value
> [ 0.000000] Detected 2599.948 MHz processor.
> [ 0.004000] spurious 8259A interrupt: IRQ7.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Checking aperture...
> [ 0.004000] No AGP bridge found
> [ 0.004000] Node 0: aperture @ 4ba6000000 size 32 MB
> [ 0.004000] Aperture beyond 4GB. Ignoring.
> [ 0.004000] Your BIOS doesn't leave a aperture memory hole
> [ 0.004000] Please enable the IOMMU option in the BIOS setup
> [ 0.004000] This costs you 64 MB of RAM
> [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
> [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
> [ 0.004000] Memory: 3981032k/4718592k available (3112k kernel code, 146896k reserved, 1575k data, 536k init)
> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.004000] hpet clockevent registered
> [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.88 BogoMIPS (lpj=10399776)
> [ 0.004000] Security Framework initialized
> [ 0.004000] SELinux: Disabled at boot.
> [ 0.004000] AppArmor: AppArmor initialized
> [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.004000] Mount-cache hash table entries: 256
> [ 0.004000] Initializing cgroup subsys ns
> [ 0.004000] Initializing cgroup subsys cpuacct
> [ 0.004000] Initializing cgroup subsys memory
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 0/0 -> Node 0
> [ 0.004000] tseg: 0000000000
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 0
> [ 0.004000] using C1E aware idle routine
> [ 0.004000] ACPI: Core revision 20080609
> [ 0.007163] ACPI: Checking initramfs for custom DSDT
> [ 0.263756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.303460] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.303463] Using local APIC timer interrupts.
> [ 0.304020] APIC timer calibration result 12499742
> [ 0.304021] Detected 12.499 MHz APIC timer.
> [ 0.304123] Booting processor 1/1 ip 6000
> [ 0.004000] Initializing CPU#1
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.14 BogoMIPS (lpj=10400292)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 1/1 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.392336] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.392346] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.396044] System has AMD C1E enabled
> [ 0.396055] Switch to broadcast mode on CPU1
> [ 0.396090] Booting processor 2/2 ip 6000
> [ 0.004000] Initializing CPU#2
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.02 BogoMIPS (lpj=10400057)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 2/2 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 2
> [ 0.484368] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.484377] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> [ 0.488051] Switch to broadcast mode on CPU2
> [ 0.488098] Booting processor 3/3 ip 6000
> [ 0.004000] Initializing CPU#3
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.02 BogoMIPS (lpj=10400044)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 3/3 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 3
> [ 0.576361] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.576371] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> [ 0.580051] Brought up 4 CPUs
> [ 0.580053] Total of 4 processors activated (20800.08 BogoMIPS).
> [ 0.580055] Switch to broadcast mode on CPU3
> [ 0.580129] CPU0 attaching sched-domain:
> [ 0.580132] domain 0: span 0-3 level CPU
> [ 0.580133] groups: 0 1 2 3
> [ 0.580137] domain 1: span 0-3 level NODE
> [ 0.580138] groups: 0-3
> [ 0.580142] CPU1 attaching sched-domain:
> [ 0.580143] domain 0: span 0-3 level CPU
> [ 0.580144] groups: 1 2 3 0
> [ 0.580147] domain 1: span 0-3 level NODE
> [ 0.580148] groups: 0-3
> [ 0.580151] CPU2 attaching sched-domain:
> [ 0.580152] domain 0: span 0-3 level CPU
> [ 0.580153] groups: 2 3 0 1
> [ 0.580156] domain 1: span 0-3 level NODE
> [ 0.580157] groups: 0-3
> [ 0.580160] CPU3 attaching sched-domain:
> [ 0.580161] domain 0: span 0-3 level CPU
> [ 0.580162] groups: 3 0 1 2
> [ 0.580165] domain 1: span 0-3 level NODE
> [ 0.580166] groups: 0-3
> [ 0.580266] Switch to broadcast mode on CPU0
> [ 0.580266] net_namespace: 1552 bytes
> [ 0.580266] Booting paravirtualized kernel on bare hardware
> [ 0.580293] Time: 21:54:41 Date: 11/27/08
> [ 0.580317] NET: Registered protocol family 16
> [ 0.580333] node 0 link 0: io port [5000, ffffff]
> [ 0.580333] node 0 link 0: io port [1000, 1fff]
> [ 0.580333] TOM: 00000000e0000000 aka 3584M
> [ 0.580333] Fam 10h mmconf [e0000000, efffffff]
> [ 0.580333] node 0 link 0: mmio [e0000000, efffffff] ==> none
> [ 0.580333] node 0 link 0: mmio [a0000, bffff]
> [ 0.580333] node 0 link 0: mmio [e0000000, fe0bffff] ==> [f0000000, fe0bffff]
> [ 0.580333] TOM2: 0000000120000000 aka 4608M
> [ 0.580333] bus: [00,07] on node 0 link 0
> [ 0.580333] bus: 00 index 0 io port: [2000, ffff]
> [ 0.580333] bus: 00 index 1 io port: [0, 1fff]
> [ 0.580333] bus: 00 index 2 mmio: [a0000, bffff]
> [ 0.580333] bus: 00 index 3 mmio: [f0000000, ffffffff]
> [ 0.580333] bus: 00 index 4 mmio: [120000000, fcffffffff]
> [ 0.580333] ACPI: bus type pci registered
> [ 0.580333] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> [ 0.580333] PCI: Not using MMCONFIG.
> [ 0.580333] PCI: Using configuration type 1 for base access
> [ 0.580333] PCI: Using configuration type 1 for extended access
> [ 0.580333] mtrr: your CPUs had inconsistent fixed MTRR settings
> [ 0.580333] mtrr: probably your BIOS does not setup all CPUs.
> [ 0.580333] mtrr: corrected configuration.
> [ 0.581021] ACPI: EC: Look up EC in DSDT
> [ 0.604323] ACPI: Interpreter enabled
> [ 0.604325] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.604340] ACPI: Using IOAPIC for interrupt routing
> [ 0.604422] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> [ 0.616881] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
> [ 0.627327] PCI: Using MMCONFIG at e0000000 - efffffff
> [ 0.648288] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.648288] PCI: 0000:00:01.0 reg 10 io port: [900, 9ff]
> [ 0.648288] PCI: 0000:00:01.1 reg 10 io port: [e00, e3f]
> [ 0.648288] PCI: 0000:00:01.1 reg 20 io port: [600, 63f]
> [ 0.648288] PCI: 0000:00:01.1 reg 24 io port: [700, 73f]
> [ 0.648288] pci 0000:00:01.1: PME# supported from D3hot D3cold
> [ 0.648290] pci 0000:00:01.1: PME# disabled
> [ 0.648338] PCI: 0000:00:01.3 reg 10 32bit mmio: [fce80000, fcefffff]
> [ 0.648457] PCI: 0000:00:02.0 reg 10 32bit mmio: [fce7e000, fce7efff]
> [ 0.648477] pci 0000:00:02.0: supports D1
> [ 0.648478] pci 0000:00:02.0: supports D2
> [ 0.648479] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648481] pci 0000:00:02.0: PME# disabled
> [ 0.648499] PCI: 0000:00:02.1 reg 10 32bit mmio: [fce7fc00, fce7fcff]
> [ 0.648522] pci 0000:00:02.1: supports D1
> [ 0.648523] pci 0000:00:02.1: supports D2
> [ 0.648524] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648527] pci 0000:00:02.1: PME# disabled
> [ 0.648547] PCI: 0000:00:04.0 reg 10 32bit mmio: [fce7d000, fce7dfff]
> [ 0.648566] pci 0000:00:04.0: supports D1
> [ 0.648567] pci 0000:00:04.0: supports D2
> [ 0.648569] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648571] pci 0000:00:04.0: PME# disabled
> [ 0.648589] PCI: 0000:00:04.1 reg 10 32bit mmio: [fce7f800, fce7f8ff]
> [ 0.648612] pci 0000:00:04.1: supports D1
> [ 0.648613] pci 0000:00:04.1: supports D2
> [ 0.648614] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648617] pci 0000:00:04.1: PME# disabled
> [ 0.648644] PCI: 0000:00:06.0 reg 20 io port: [ffa0, ffaf]
> [ 0.648675] PCI: 0000:00:07.0 reg 10 32bit mmio: [fce78000, fce7bfff]
> [ 0.648697] pci 0000:00:07.0: PME# supported from D3hot D3cold
> [ 0.648700] pci 0000:00:07.0: PME# disabled
> [ 0.648740] PCI: 0000:00:09.0 reg 10 io port: [d480, d487]
> [ 0.648742] PCI: 0000:00:09.0 reg 14 io port: [d400, d403]
> [ 0.648745] PCI: 0000:00:09.0 reg 18 io port: [d080, d087]
> [ 0.648748] PCI: 0000:00:09.0 reg 1c io port: [d000, d003]
> [ 0.648751] PCI: 0000:00:09.0 reg 20 io port: [cc00, cc0f]
> [ 0.648753] PCI: 0000:00:09.0 reg 24 32bit mmio: [fce76000, fce77fff]
> [ 0.648784] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648786] pci 0000:00:0b.0: PME# disabled
> [ 0.648957] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648964] pci 0000:00:10.0: PME# disabled
> [ 0.649132] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.649144] pci 0000:00:12.0: PME# disabled
> [ 0.652072] PCI: 0000:01:07.0 reg 10 32bit mmio: [fcff8000, fcffffff]
> [ 0.652124] pci 0000:00:08.0: transparent bridge
> [ 0.652127] PCI: bridge 0000:00:08.0 32bit mmio: [fcf00000, fcffffff]
> [ 0.652143] PCI: 0000:02:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
> [ 0.652146] PCI: 0000:02:00.0 reg 14 32bit mmio: [f0000000, f7ffffff]
> [ 0.652150] PCI: 0000:02:00.0 reg 1c 32bit mmio: [fa000000, fbffffff]
> [ 0.652155] PCI: 0000:02:00.0 reg 24 io port: [ec00, ec7f]
> [ 0.652158] PCI: 0000:02:00.0 reg 30 32bit mmio: [febe0000, febfffff]
> [ 0.652177] PCI: bridge 0000:00:0b.0 io port: [e000, efff]
> [ 0.652179] PCI: bridge 0000:00:0b.0 32bit mmio: [fd000000, febfffff]
> [ 0.652182] PCI: bridge 0000:00:0b.0 64bit mmio pref: [f0000000, fbffffff]
> [ 0.652349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.652824] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.653015] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.653160] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.653326] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.676386] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
> [ 0.676801] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
> [ 0.677205] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
> [ 0.677617] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
> [ 0.678028] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
> [ 0.678434] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.678846] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.679248] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.680218] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
> [ 0.680622] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.681031] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.681439] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.681851] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
> [ 0.682259] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.682668] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.683082] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.683490] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
> [ 0.683894] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.684307] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.684716] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.685124] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
> [ 0.685530] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.685941] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.686350] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.686759] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
> [ 0.687172] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.687581] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.687990] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.688425] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
> [ 0.688828] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.689243] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.689652] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.690061] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
> [ 0.690471] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
> [ 0.690881] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
> [ 0.691290] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
> [ 0.691701] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
> [ 0.692116] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> [ 0.692525] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
> [ 0.692939] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
> [ 0.693351] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
> [ 0.693764] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
> [ 0.694176] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
> [ 0.694589] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> [ 0.695075] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
> [ 0.695488] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
> [ 0.695896] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
> [ 0.696078] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - AE, should be A1 [20080609]
> [ 0.696170] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.696177] pnp: PnP ACPI init
> [ 0.696177] ACPI: bus type pnp registered
> [ 0.700673] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
> [ 0.700675] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
> [ 0.711103] pnp: PnP ACPI: found 15 devices
> [ 0.711105] ACPI: ACPI bus type pnp unregistered
> [ 0.711119] PCI: Using ACPI for IRQ routing
> [ 0.732038] NET: Registered protocol family 8
> [ 0.732040] NET: Registered protocol family 20
> [ 0.732050] NetLabel: Initializing
> [ 0.732050] NetLabel: domain hash size = 128
> [ 0.732050] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.732050] NetLabel: unlabeled traffic allowed by default
> [ 0.732178] PCI-DMA: Disabling AGP.
> [ 0.732586] PCI-DMA: aperture base @ 20000000 size 65536 KB
> [ 0.732586] PCI-DMA: using GART IOMMU.
> [ 0.732586] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> [ 0.733372] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
> [ 0.733377] hpet0: 3 32-bit timers, 25000000 Hz
> [ 0.736049] Switched to high resolution mode on CPU 0
> [ 0.736057] Switched to high resolution mode on CPU 3
> [ 0.736059] Switched to high resolution mode on CPU 1
> [ 0.736062] Switched to high resolution mode on CPU 2
> [ 0.737571] tracer: 1286 pages allocated for 65536 entries of 80 bytes
> [ 0.737573] actual entries 65586
> [ 0.737653] AppArmor: AppArmor Filesystem Enabled
> [ 0.737682] ACPI: RTC can wake from S4
> [ 0.752343] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.752345] system 00:06: ioport range 0x800-0x80f has been reserved
> [ 0.752347] system 00:06: ioport range 0x500-0x57f has been reserved
> [ 0.752349] system 00:06: ioport range 0x580-0x5ff has been reserved
> [ 0.752351] system 00:06: ioport range 0x800-0x87f could not be reserved
> [ 0.752353] system 00:06: ioport range 0x880-0x8ff has been reserved
> [ 0.752355] system 00:06: ioport range 0xd00-0xd7f has been reserved
> [ 0.752356] system 00:06: ioport range 0xd80-0xdff has been reserved
> [ 0.752360] system 00:06: iomem range 0xfed04000-
> [ 0.752361] system 00:06: iomem range 0xfee01000-
> [ 0.752368] system 00:09: iomem range 0xfec00000-
> [ 0.752369] system 00:09: iomem range 0xfee00000-
> [ 0.752371] system 00:09: iomem range 0xdc000000-
> [ 0.752376] system 00:0b: ioport range 0x230-0x23f has been reserved
> [ 0.752378] system 00:0b: ioport range 0x290-0x29f has been reserved
> [ 0.752380] system 00:0b: ioport range 0xa00-0xa0f has been reserved
> [ 0.752381] system 00:0b: ioport range 0xa10-0xa1f has been reserved
> [ 0.752386] system 00:0d: iomem range 0xe0000000-
> [ 0.752391] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
> [ 0.752393] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
> [ 0.752394] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
> [ 0.752396] system 00:0e: iomem range 0x100000-0xdfffffff could not be reserved
> [ 0.752398] system 00:0e: iomem range 0xfed45000-
> [ 0.757454] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
> [ 0.757456] pci 0000:00:08.0: IO window: disabled
> [ 0.757460] pci 0000:00:08.0: MEM window: 0xfcf00000-
> [ 0.757462] pci 0000:00:08.0: PREFETCH window: disabled
> [ 0.757466] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
> [ 0.757468] pci 0000:00:0b.0: IO window: 0xe000-0xefff
> [ 0.757470] pci 0000:00:0b.0: MEM window: 0xfd000000-
> [ 0.757472] pci 0000:00:0b.0: PREFETCH window: 0x000000f000000
> [ 0.757475] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
> [ 0.757477] pci 0000:00:10.0: IO window: disabled
> [ 0.757485] pci 0000:00:10.0: MEM window: disabled
> [ 0.757492] pci 0000:00:10.0: PREFETCH window: disabled
> [ 0.757504] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
> [ 0.757505] pci 0000:00:12.0: IO window: disabled
> [ 0.757515] pci 0000:00:12.0: MEM window: disabled
> [ 0.757521] pci 0000:00:12.0: PREFETCH window: disabled
> [ 0.757537] pci 0000:00:08.0: setting latency timer to 64
> [ 0.757542] pci 0000:00:0b.0: setting latency timer to 64
> [ 0.758107] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
> [ 0.758117] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
> [ 0.758124] pci 0000:00:10.0: setting latency timer to 64
> [ 0.758658] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
> [ 0.758664] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
> [ 0.758671] pci 0000:00:12.0: setting latency timer to 64
> [ 0.758676] bus: 00 index 0 io port: [0, ffff]
> [ 0.758677] bus: 00 index 1 mmio: [0, ffffffffffffffff]
> [ 0.758679] bus: 01 index 0 mmio: [0, 0]
> [ 0.758680] bus: 01 index 1 mmio: [fcf00000, fcffffff]
> [ 0.758681] bus: 01 index 2 mmio: [0, 0]
> [ 0.758683] bus: 01 index 3 io port: [0, ffff]
> [ 0.758684] bus: 01 index 4 mmio: [0, ffffffffffffffff]
> [ 0.758687] bus: 02 index 0 io port: [e000, efff]
> [ 0.758689] bus: 02 index 1 mmio: [fd000000, febfffff]
> [ 0.758690] bus: 02 index 2 mmio: [f0000000, fbffffff]
> [ 0.758691] bus: 02 index 3 mmio: [0, 0]
> [ 0.758692] bus: 03 index 0 mmio: [0, 0]
> [ 0.758693] bus: 03 index 1 mmio: [0, 0]
> [ 0.758694] bus: 03 index 2 mmio: [0, 0]
> [ 0.758695] bus: 03 index 3 mmio: [0, 0]
> [ 0.758697] bus: 04 index 0 mmio: [0, 0]
> [ 0.758698] bus: 04 index 1 mmio: [0, 0]
> [ 0.758699] bus: 04 index 2 mmio: [0, 0]
> [ 0.758700] bus: 04 index 3 mmio: [0, 0]
> [ 0.758710] NET: Registered protocol family 2
> [ 0.796155] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.797200] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> [ 0.799725] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.800065] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.800068] TCP reno registered
> [ 0.812402] NET: Registered protocol family 1
> [ 0.812500] checking if image is initramfs... it is
> [ 1.321953] Freeing initrd memory: 8430k freed
> [ 1.326209] audit: initializing netlink socket (disabled)
> [ 1.326220] type=2000 audit(122782288
> [ 1.330466] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.332805] VFS: Disk quotas dquot_6.5.1
> [ 1.332878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.332961] msgmni has been set to 7791
> [ 1.333064] io scheduler noop registered
> [ 1.333066] io scheduler anticipatory registered
> [ 1.333067] io scheduler deadline registered
> [ 1.333172] io scheduler cfq registered (default)
> [ 1.400235] pci 0000:00:07.0: Enabling HT MSI Mapping
> [ 1.400264] pci 0000:00:08.0: Enabling HT MSI Mapping
> [ 1.400292] pci 0000:00:09.0: Enabling HT MSI Mapping
> [ 1.400319] pci 0000:00:0b.0: Enabling HT MSI Mapping
> [ 1.400374] pci 0000:00:10.0: Enabling HT MSI Mapping
> [ 1.400439] pci 0000:00:12.0: Enabling HT MSI Mapping
> [ 1.400482] pci 0000:02:00.0: Boot video device
> [ 1.400614] pcieport-driver 0000:00:10.0: setting latency timer to 64
> [ 1.400778] pcieport-driver 0000:00:10.0: found MSI capability
> [ 1.400891] pci_express 0000:00:
> [ 1.401134] pcieport-driver 0000:00:12.0: setting latency timer to 64
> [ 1.401297] pcieport-driver 0000:00:12.0: found MSI capability
> [ 1.401406] pci_express 0000:00:
> [ 1.433382] hpet_resources: 0xfed00000 is busy
> [ 1.433476] Linux agpgart interface v0.103
> [ 1.433480] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> [ 1.433612] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.434183] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.435665] brd: module loaded
> [ 1.435725] input: Macintosh mouse button emulation as /devices/
> [ 1.435821] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 1.435823] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [ 1.435943] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.452433] mice: PS/2 mouse device common for all mice
> [ 1.452537] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
> [ 1.452593] rtc0: alarms up to one year, y3k, hpet irqs
> [ 1.452626] cpuidle: using governor ladder
> [ 1.452628] cpuidle: using governor menu
> [ 1.452947] TCP cubic registered
> [ 1.453133] registered taskstats version 1
> [ 1.453238] Magic number: 0:181:956
> [ 1.453269] tty ptyzd: hash matches
> [ 1.453301] pci 0000:00:04.0: hash matches
> [ 1.453378] rtc_cmos 00:08: setting system clock to 2008-11-27 21:54:41 UTC (1227822881)
> [ 1.453380] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.453382] EDD information not available.
> [ 1.453422] Freeing unused kernel memory: 536k freed
> [ 1.453619] Write protecting the kernel read-only data: 4348k
> [ 1.468087] input: AT Translated Set 2 keyboard as /devices/
> [ 1.587107] fuse init (API version 7.9)
> [ 1.601781] processor ACPI0007:00: registered as cooling_device0
> [ 1.601838] processor ACPI0007:01: registered as cooling_device1
> [ 1.601889] processor ACPI0007:02: registered as cooling_device2
> [ 1.601943] processor ACPI0007:03: registered as cooling_device3
> [ 1.808336] usbcore: registered new interface driver usbfs
> [ 1.808354] usbcore: registered new interface driver hub
> [ 1.808382] usbcore: registered new device driver usb
> [ 1.809786] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.810366] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
> [ 1.810377] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
> [ 1.810388] ohci_hcd 0000:00:02.0: setting latency timer to 64
> [ 1.810390] ohci_hcd 0000:00:02.0: OHCI Host Controller
> [ 1.810429] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
> [ 1.810457] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfce7e000
> [ 1.822674] No dock devices found.
> [ 1.860323] SCSI subsystem initialized
> [ 1.867628] usb usb1: configuration #1 chosen from 1 choice
> [ 1.867650] hub 1-0:1.0: USB hub found
> [ 1.867658] hub 1-0:1.0: 6 ports detected
> [ 1.870478] libata version 3.00 loaded.
> [ 2.115951] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22
> [ 2.115996] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22
> [ 2.116026] ohci_hcd 0000:00:04.0: setting latency timer to 64
> [ 2.116043] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [ 2.116078] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
> [ 2.116192] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfce7d000
> [ 2.170259] usb usb2: configuration #1 chosen from 1 choice
> [ 2.170282] hub 2-0:1.0: USB hub found
> [ 2.170291] hub 2-0:1.0: 6 ports detected
> [ 2.232117] usb 1-3: new full speed USB device using ohci_hcd and address 2
> [ 2.377258] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
> [ 2.377301] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
> [ 2.377330] ehci_hcd 0000:00:02.1: setting latency timer to 64
> [ 2.377341] ehci_hcd 0000:00:02.1: EHCI Host Controller
> [ 2.377380] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
> [ 2.377511] ehci_hcd 0000:00:02.1: debug port 1
> [ 2.377556] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
> [ 2.377583] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfce7fc00
> [ 2.420050] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 2.420141] usb usb3: configuration #1 chosen from 1 choice
> [ 2.420164] hub 3-0:1.0: USB hub found
> [ 2.420170] hub 3-0:1.0: 6 ports detected
> [ 2.629672] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
> [ 2.629682] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
> [ 2.629691] ehci_hcd 0000:00:04.1: setting latency timer to 64
> [ 2.629693] ehci_hcd 0000:00:04.1: EHCI Host Controller
> [ 2.629716] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
> [ 2.629736] ehci_hcd 0000:00:04.1: debug port 1
> [ 2.629740] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
> [ 2.629754] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfce7f800
> [ 2.640343] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 2.640414] usb usb4: configuration #1 chosen from 1 choice
> [ 2.640434] hub 4-0:1.0: USB hub found
> [ 2.640439] hub 4-0:1.0: 6 ports detected
> [ 2.817635] usb 1-3: device not accepting address 2, error -62
> [ 2.849164] pata_amd 0000:00:06.0: version 0.3.10
> [ 2.849200] pata_amd 0000:00:06.0: setting latency timer to 64
> [ 2.849286] scsi0 : pata_amd
> [ 2.850142] scsi1 : pata_amd
> [ 2.851605] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
> [ 2.851607] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
> [ 2.872114] hub 1-0:1.0: unable to enumerate USB device on port 3
> [ 3.205710] ata1.00: failed to set max address (err_mask=0x1)
> [ 3.205713] ata1.00: device aborted resize (321672960 -> 184467440736956
> [ 3.205718] ata1.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
> [ 3.205720] ata1.00: 321672960 sectors, multi 16: LBA48
> [ 3.205726] ata1.00: Drive reports diagnostics failure. This may indicate a drive
> [ 3.205727] ata1.00: fault or invalid emulation. Contact drive vendor for information.
> [ 3.205735] ata1.01: ATAPI: SONY CD-RW CRX225E, QYB1, max UDMA/33
> [ 3.205744] ata1: nv_mode_filter: 0x7f39f&
> [ 3.205748] ata1: nv_mode_filter: 0x739f&
> [ 3.220265] ata1.00: configured for UDMA/133
> [ 3.236325] ata1.01: configured for UDMA/33
> [ 3.236364] ata2: port disabled. ignoring.
> [ 3.236454] scsi 0:0:0:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5
> [ 3.238267] scsi 0:0:1:0: CD-ROM SONY CD-RW CRX225E QYB1 PQ: 0 ANSI: 5
> [ 3.239534] ahci 0000:00:09.0: version 3.0
> [ 3.240096] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
> [ 3.240099] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
> [ 3.240176] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
> [ 3.240179] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
> [ 3.240181] ahci 0000:00:09.0: setting latency timer to 64
> [ 3.240453] scsi2 : ahci
> [ 3.240522] scsi3 : ahci
> [ 3.240571] scsi4 : ahci
> [ 3.240620] scsi5 : ahci
> [ 3.240667] scsi6 : ahci
> [ 3.240712] scsi7 : ahci
> [ 3.240789] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 2301
> [ 3.240791] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 2301
> [ 3.240793] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 2301
> [ 3.240795] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 2301
> [ 3.240796] ata7: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 2301
> [ 3.240798] ata8: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 2301
> [ 3.480117] usb 4-1: new high speed USB device using ehci_hcd and address 2
> [ 3.560323] ata3: SATA link down (SStatus 0 SControl 300)
> [ 3.617843] usb 4-1: configuration #1 chosen from 1 choice
> [ 3.880189] ata4: SATA link down (SStatus 0 SControl 300)
> [ 3.976147] usb 2-3: new low speed USB device using ohci_hcd and address 2
> [ 4.185972] usb 2-3: configuration #1 chosen from 1 choice
> [ 4.364175] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 4.367612] ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
> [ 4.371744] ata5.00: configured for UDMA/100
> [ 4.492158] usb 1-3: new full speed USB device using ohci_hcd and address 4
> [ 4.688075] ata6: SATA link down (SStatus 0 SControl 300)
> [ 4.706354] usb 1-3: configuration #1 chosen from 1 choice
> [ 5.008258] ata7: SATA link down (SStatus 0 SControl 300)
> [ 5.328328] ata8: SATA link down (SStatus 0 SControl 300)
> [ 5.331492] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
> [ 5.356229] usbcore: registered new interface driver hiddev
> [ 5.360463] scsi 0:0:0:0: Attached scsi generic sg0 type 0
> [ 5.360493] scsi 0:0:1:0: Attached scsi generic sg1 type 5
> [ 5.360528] scsi 4:0:0:0: Attached scsi generic sg2 type 5
> [ 5.362400] input: USB Mouse as /devices/
> [ 5.370937] Driver 'sd' needs updating - please use bus_type methods
> [ 5.371020] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
> [ 5.371032] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.371034] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.371055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.371110] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
> [ 5.371120] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.371122] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.371139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.371145] sda:<4>Driver 'sr' needs updating - please use bus_type methods
> [ 5.381182] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:04.0-3
> [ 5.381200] usbcore: registered new interface driver usbhid
> [ 5.381203] usbhid: v2.6:USB HID core driver
> [ 5.385115] sda1 sda2 < sda5 sda6 sda7 >
> [ 5.425035] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 5.426138] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
> [ 5.426141] Uniform CD-ROM driver Revision: 3.20
> [ 5.426203] sr 0:0:1:0: Attached scsi CD-ROM sr0
> [ 5.644646] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 5.644729] sr 4:0:0:0: Attached scsi CD-ROM sr1
> [ 6.365982] PM: Starting manual resume from disk
> [ 6.365985] PM: Resume from partition 8:7
> [ 6.365986] PM: Checking hibernation image.
> [ 6.366414] PM: Resume from disk failed.
> [ 6.402449] kjournald starting. Commit interval 5 seconds
> [ 6.402465] EXT3-fs: mounted filesystem with ordered data mode.
> [ 11.598742] udevd version 124 started
> [ 11.807814] input: Power Button (FF) as /devices/
> [ 11.829550] ACPI: Power Button (FF) [PWRF]
> [ 11.829652] input: Power Button (CM) as /devices/
> [ 11.861525] ACPI: Power Button (CM) [PWRB]
> [ 12.133447] ACPI: WMI: Mapper loaded
> [ 12.341410] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 12.346529] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 12.390635] parport_pc 00:05: reported by Plug and Play ACPI
> [ 12.390681] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [ 12.401830] input: PC Speaker as /devices/
> [ 12.413247] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2C17
> [ 12.413268] usbcore: registered new interface driver usblp
> [ 12.821679] nvidia: module license 'NVIDIA' taints kernel.
> [ 13.075284] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
> [ 13.075289] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22
> [ 13.075294] nvidia 0000:02:00.0: setting latency timer to 64
> [ 13.075427] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008
> [ 17.334403] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
> [ 17.334414] rt61pci 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
> [ 17.341358] phy0: Selected rate control algorithm 'pid'
> [ 21.059814] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 21.059818] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 21.059822] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 21.059825] end_request: I/O error, dev sr0, sector 76360
> [ 21.059829] Buffer I/O error on device sr0, logical block 9545
> [ 22.847983] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 22.847985] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 22.847988] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 22.847990] end_request: I/O error, dev sr0, sector 76360
> [ 22.847992] Buffer I/O error on device sr0, logical block 9545
> [ 24.600539] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 24.600544] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 24.600547] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 24.600550] end_request: I/O error, dev sr0, sector 76360
> [ 24.600554] Buffer I/O error on device sr0, logical block 9545
> [ 26.351571] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 26.351574] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 26.351576] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 26.351578] end_request: I/O error, dev sr0, sector 76360
> [ 26.351580] Buffer I/O error on device sr0, logical block 9545
> [ 28.138071] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 28.138075] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 28.138078] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 28.138080] end_request: I/O error, dev sr0, sector 76360
> [ 28.138084] Buffer I/O error on device sr0, logical block 9545
> [ 29.889058] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 29.889061] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 29.889063] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 29.889065] end_request: I/O error, dev sr0, sector 76360
> [ 29.889067] Buffer I/O error on device sr0, logical block 9545
> [ 31.676741] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 31.676744] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 31.676747] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 31.676750] end_request: I/O error, dev sr0, sector 76360
> [ 31.676753] Buffer I/O error on device sr0, logical block 9545
> [ 33.606897] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 33.606902] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 33.606905] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 33.606909] end_request: I/O error, dev sr0, sector 76360
> [ 33.606913] Buffer I/O error on device sr0, logical block 9545
> [ 35.395129] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=
> [ 35.395133] sr 0:0:1:0: [sr0] Sense Key : Medium Error [current]
> [ 35.395135] sr 0:0:1:0: [sr0] Add. Sense: L-EC uncorrectable error
> [ 35.395138] end_request: I/O error, dev sr0, sector 76360
> [ 35.395142] Buffer I/O error on device sr0, logical block 9545
> [ 35.806983] Registered led device: rt61pci-phy0:radio
> [ 35.806995] Registered led device: rt61pci-phy0:assoc
> [ 35.961389] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
> [ 35.961938] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
> [ 35.961941] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
> [ 35.961956] HDA Intel 0000:00:07.0: setting latency timer to 64
> [ 35.992349] hda-intel: no codecs initialized
> [ 35.992383] HDA Intel 0000:00:07.0: PCI INT A disabled
> [ 36.597838] lp0: using parport0 (interrupt-driven).
> [ 36.726834] Adding 1060248k swap on /dev/sda7. Priority:-1 extents:1 across:1060248k
> [ 37.273487] EXT3 FS on sda6, internal journal
> [ 38.274743] type=1505 audit(122783011
> [ 38.395648] type=1505 audit(122783011
> [ 38.395785] type=1505 audit(122783011
> [ 38.519659] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 39.229147] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
> [ 39.229185] powernow-k8: 0 : pstate 0 (2600 MHz)
> [ 39.229188] powernow-k8: 1 : pstate 1 (1300 MHz)
> [ 39.840551] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
> [ 40.026262] ppdev: user-space parallel port driver
> [ 44.000344] Bluetooth: Core ver 2.13
> [ 44.000466] NET: Registered protocol family 31
> [ 44.000470] Bluetooth: HCI device and connection manager initialized
> [ 44.000474] Bluetooth: HCI socket layer initialized
> [ 44.021226] Bluetooth: L2CAP ver 2.11
> [ 44.021239] Bluetooth: L2CAP socket layer initialized
> [ 44.058383] Bluetooth: SCO (Voice Link) ver 0.6
> [ 44.058390] Bluetooth: SCO socket layer initialized
> [ 44.129315] Bluetooth: RFCOMM socket layer initialized
> [ 44.129335] Bluetooth: RFCOMM TTY layer initialized
> [ 44.129338] Bluetooth: RFCOMM ver 1.10
> [ 44.156216] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 44.156224] Bluetooth: BNEP filters: protocol multicast
> [ 44.190241] Bridge firewalling registered
> [ 44.190478] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> [ 48.295618] firmware: requesting rt2561s.bin
> [ 48.640853] NET: Registered protocol family 17
> [ 67.486550] cdrom: sr0: mrw address space DMA selected
> [ 68.386986] ISO 9660 Extensions: Microsoft Joliet Level 3
> [ 68.395883] ISOFS: changing to secondary root
> [ 118.199450] NET: Registered protocol family 10
> [ 118.200235] lo: Disabled Privacy Extensions
> [ 118.201322] ADDRCONF(
> [ 142.128821] ppdev0: registered pardevice
> [ 142.176536] ppdev0: unregistered pardevice
> [ 142.186151] ppdev0: registered pardevice
> [ 142.232339] ppdev0: unregistered pardevice
> [ 142.621038] ppdev0: registered pardevice
> [ 142.668267] ppdev0: unregistered pardevice
> [ 154.928079] wlan0: authenticate with AP 00:03:2f:39:8c:88
> [ 154.929596] wlan0: authenticated
> [ 154.929607] wlan0: associate with AP 00:03:2f:39:8c:88
> [ 154.932963] wlan0: RX AssocResp from 00:03:2f:39:8c:88 (capab=0x431 status=0 aid=2)
> [ 154.932969] wlan0: associated
> [ 154.934395] ADDRCONF(
> [ 165.568407] wlan0: no IPv6 routers present
>
> --
> You received this question notification because you are an answer
> contact for Ubuntu.
>
|
Revision history for this message
|
#11 |
Ivancete:
La PC la armé yo, y es posible que aún reste configurar algun parametro en
el Bios.
dado que este motheroard posee un solo puerto para un cable IDE (provisto
por Asus junto con el mother), y a él tengo conectados el HDD y un CD-RW,
siguendo las indicaciones que me sugeriste, desconecté el CD-RW.
El booteo pareció normal, igualmente poseto más abajo el dmesg de este
arranque.
Por otro lado, creo igual que debe de existir alguna otra solucion (quiza de
configuración del Bios o el Kernel) para que me permita a futuro bootear con
esta unidad conectada, ya que la necesito.
aqui va el dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version
4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu
2.6.27-
[ 0.000000] Command line: root=UUID=
ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbf90000 (usable)
[ 0.000000] BIOS-e820: 00000000dbf90000 - 00000000dbf9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dbf9e000 - 00000000dbfe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dbfe0000 - 00000000dbfee000 (reserved)
[ 0.000000] BIOS-e820: 00000000dbff0000 - 00000000dc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xdbf90 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00dbe00000 page 2M
[ 0.000000] 00dbe00000 - 00dbf90000 page 4k
[ 0.000000] kernel direct mapping tables up to dbf90000 @ 8000-e000
[ 0.000000] last_map_addr: dbf90000 end: dbf90000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[ 0.000000] last_map_addr: 120000000 end: 120000000
[ 0.000000] RAMDISK: 377b4000 - 37fef87a
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FB590, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT DBF90000, 0044 (r1 101508 RSDT1157 20081015
MSFT 97)
[ 0.000000] ACPI: FACP DBF90200, 0084 (r1 101508 FACP1157 20081015
MSFT 97)
[ 0.000000] ACPI: DSDT DBF90450, AE9D (r1 A1041 A1041000 0 INTL
20051117)
[ 0.000000] ACPI: FACS DBF9E000, 0040
[ 0.000000] ACPI: APIC DBF90390, 0080 (r1 101508 APIC1157 20081015
MSFT 97)
[ 0.000000] ACPI: MCFG DBF90410, 003C (r1 101508 OEMMCFG 20081015
MSFT 97)
[ 0.000000] ACPI: OEMB DBF9E040, 0072 (r1 101508 OEMB1157 20081015
MSFT 97)
[ 0.000000] ACPI: HPET DBF9B2F0, 0038 (r1 101508 OEMHPET0 20081015
MSFT 97)
[ 0.000000] ACPI: INFO DBF9E0C0, 0124 (r1 101508 AMDINFO 20081015
MSFT 97)
[ 0.000000] ACPI: NVHD DBF9E1F0, 0284 (r1 101508 NVHDCP 20081015
MSFT 97)
[ 0.000000] ACPI: SSDT DBF9B330, 0544 (r1 A_M_I_ POWERNOW 1
AMD 1)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Bootmem setup node 0 000000000000000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [000000000000d000 - 0000000000030fff] pages 24
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==>
[0000200000 - 00008b8f9c]
[ 0.000000] #3 [00377b4000 - 0037fef87a] RAMDISK ==>
[00377b4000 - 0037fef87a]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==>
[000009ec00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==>
[0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==>
[000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe200000000
[ffff8800282000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dbf90
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1031982
[ 0.000000] DMA zone: 2107 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 880592 pages, LIFO batch:31
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dbf90000 -
00000000dbf9e000
[ 0.000000] PM: Registered nosave memory: 00000000dbf9e000 -
00000000dbfe0000
[ 0.000000] PM: Registered nosave memory: 00000000dbfe0000 -
00000000dbfee000
[ 0.000000] PM: Registered nosave memory: 00000000dbfee000 -
00000000dbff0000
[ 0.000000] PM: Registered nosave memory: 00000000dbff0000 -
00000000dc000000
[ 0.000000] PM: Registered nosave memory: 00000000dc000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
dc000000:22c00000)
[ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1011723
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
root=UUID=
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2599.926 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 4ba6000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.004000] Memory: 3981032k/4718592k available (3112k kernel code,
146896k reserved, 1575k data, 536k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5199.84 BogoMIPS (lpj=10399688)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 0/0 -> Node 0
[ 0.004000] tseg: 0000000000
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] ACPI: Core revision 20080609
[ 0.007168] ACPI: Checking initramfs for custom DSDT
[ 0.263752] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.303459] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.303463] Using local APIC timer interrupts.
[ 0.304020] APIC timer calibration result 12499627
[ 0.304021] Detected 12.499 MHz APIC timer.
[ 0.304121] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5200.15
BogoMIPS (lpj=10400301)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.392330] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.392340] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.396044] System has AMD C1E enabled
[ 0.396054] Switch to broadcast mode on CPU1
[ 0.396090] Booting processor 2/2 ip 6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5200.07
BogoMIPS (lpj=10400144)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 2/2 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.484332] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.484341] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.488051] Switch to broadcast mode on CPU2
[ 0.488099] Booting processor 3/3 ip 6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5200.05
BogoMIPS (lpj=10400106)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 3/3 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.576326] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
[ 0.576336] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.580051] Brought up 4 CPUs
[ 0.580053] Total of 4 processors activated (20800.11 BogoMIPS).
[ 0.580051] Switch to broadcast mode on CPU3
[ 0.580129] CPU0 attaching sched-domain:
[ 0.580132] domain 0: span 0-3 level CPU
[ 0.580133] groups: 0 1 2 3
[ 0.580137] domain 1: span 0-3 level NODE
[ 0.580138] groups: 0-3
[ 0.580142] CPU1 attaching sched-domain:
[ 0.580143] domain 0: span 0-3 level CPU
[ 0.580144] groups: 1 2 3 0
[ 0.580147] domain 1: span 0-3 level NODE
[ 0.580149] groups: 0-3
[ 0.580151] CPU2 attaching sched-domain:
[ 0.580152] domain 0: span 0-3 level CPU
[ 0.580154] groups: 2 3 0 1
[ 0.580156] domain 1: span 0-3 level NODE
[ 0.580158] groups: 0-3
[ 0.580160] CPU3 attaching sched-domain:
[ 0.580161] domain 0: span 0-3 level CPU
[ 0.580162] groups: 3 0 1 2
[ 0.580165] domain 1: span 0-3 level NODE
[ 0.580166] groups: 0-3
[ 0.580266] Switch to broadcast mode on CPU0
[ 0.580266] net_namespace: 1552 bytes
[ 0.580266] Booting paravirtualized kernel on bare hardware
[ 0.580295] Time: 12:18:33 Date: 11/28/08
[ 0.580319] NET: Registered protocol family 16
[ 0.580334] node 0 link 0: io port [5000, ffffff]
[ 0.580334] node 0 link 0: io port [1000, 1fff]
[ 0.580334] TOM: 00000000e0000000 aka 3584M
[ 0.580334] Fam 10h mmconf [e0000000, efffffff]
[ 0.580334] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.580334] node 0 link 0: mmio [a0000, bffff]
[ 0.580334] node 0 link 0: mmio [e0000000, fe0bffff] ==> [f0000000,
fe0bffff]
[ 0.580334] TOM2: 0000000120000000 aka 4608M
[ 0.580334] bus: [00,07] on node 0 link 0
[ 0.580334] bus: 00 index 0 io port: [2000, ffff]
[ 0.580334] bus: 00 index 1 io port: [0, 1fff]
[ 0.580334] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.580334] bus: 00 index 3 mmio: [f0000000, ffffffff]
[ 0.580334] bus: 00 index 4 mmio: [120000000, fcffffffff]
[ 0.580334] ACPI: bus type pci registered
[ 0.580334] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.580334] PCI: Not using MMCONFIG.
[ 0.580334] PCI: Using configuration type 1 for base access
[ 0.580334] PCI: Using configuration type 1 for extended access
[ 0.580334] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.580334] mtrr: probably your BIOS does not setup all CPUs.
[ 0.580334] mtrr: corrected configuration.
[ 0.581019] ACPI: EC: Look up EC in DSDT
[ 0.604224] ACPI: Interpreter enabled
[ 0.604226] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.604241] ACPI: Using IOAPIC for interrupt routing
[ 0.604323] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
[ 0.617040] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.627379] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.648283] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.648283] PCI: 0000:00:01.0 reg 10 io port: [900, 9ff]
[ 0.648283] PCI: 0000:00:01.1 reg 10 io port: [e00, e3f]
[ 0.648283] PCI: 0000:00:01.1 reg 20 io port: [600, 63f]
[ 0.648283] PCI: 0000:00:01.1 reg 24 io port: [700, 73f]
[ 0.648285] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.648290] pci 0000:00:01.1: PME# disabled
[ 0.648338] PCI: 0000:00:01.3 reg 10 32bit mmio: [fce80000, fcefffff]
[ 0.648456] PCI: 0000:00:02.0 reg 10 32bit mmio: [fce7e000, fce7efff]
[ 0.648476] pci 0000:00:02.0: supports D1
[ 0.648477] pci 0000:00:02.0: supports D2
[ 0.648479] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648481] pci 0000:00:02.0: PME# disabled
[ 0.648499] PCI: 0000:00:02.1 reg 10 32bit mmio: [fce7fc00, fce7fcff]
[ 0.648522] pci 0000:00:02.1: supports D1
[ 0.648523] pci 0000:00:02.1: supports D2
[ 0.648524] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648527] pci 0000:00:02.1: PME# disabled
[ 0.648547] PCI: 0000:00:04.0 reg 10 32bit mmio: [fce7d000, fce7dfff]
[ 0.648566] pci 0000:00:04.0: supports D1
[ 0.648567] pci 0000:00:04.0: supports D2
[ 0.648568] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648571] pci 0000:00:04.0: PME# disabled
[ 0.648589] PCI: 0000:00:04.1 reg 10 32bit mmio: [fce7f800, fce7f8ff]
[ 0.648612] pci 0000:00:04.1: supports D1
[ 0.648613] pci 0000:00:04.1: supports D2
[ 0.648614] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648617] pci 0000:00:04.1: PME# disabled
[ 0.648644] PCI: 0000:00:06.0 reg 20 io port: [ffa0, ffaf]
[ 0.648675] PCI: 0000:00:07.0 reg 10 32bit mmio: [fce78000, fce7bfff]
[ 0.648697] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.648700] pci 0000:00:07.0: PME# disabled
[ 0.648740] PCI: 0000:00:09.0 reg 10 io port: [d480, d487]
[ 0.648743] PCI: 0000:00:09.0 reg 14 io port: [d400, d403]
[ 0.648745] PCI: 0000:00:09.0 reg 18 io port: [d080, d087]
[ 0.648748] PCI: 0000:00:09.0 reg 1c io port: [d000, d003]
[ 0.648751] PCI: 0000:00:09.0 reg 20 io port: [cc00, cc0f]
[ 0.648754] PCI: 0000:00:09.0 reg 24 32bit mmio: [fce76000, fce77fff]
[ 0.648784] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648786] pci 0000:00:0b.0: PME# disabled
[ 0.648957] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648964] pci 0000:00:10.0: PME# disabled
[ 0.649132] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.649144] pci 0000:00:12.0: PME# disabled
[ 0.649235] PCI: 0000:01:07.0 reg 10 32bit mmio: [fcff8000, fcffffff]
[ 0.652071] pci 0000:00:08.0: transparent bridge
[ 0.652074] PCI: bridge 0000:00:08.0 32bit mmio: [fcf00000, fcffffff]
[ 0.652090] PCI: 0000:02:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 0.652093] PCI: 0000:02:00.0 reg 14 32bit mmio: [f0000000, f7ffffff]
[ 0.652098] PCI: 0000:02:00.0 reg 1c 32bit mmio: [fa000000, fbffffff]
[ 0.652102] PCI: 0000:02:00.0 reg 24 io port: [ec00, ec7f]
[ 0.652105] PCI: 0000:02:00.0 reg 30 32bit mmio: [febe0000, febfffff]
[ 0.652125] PCI: bridge 0000:00:0b.0 io port: [e000, efff]
[ 0.652127] PCI: bridge 0000:00:0b.0 32bit mmio: [fd000000, febfffff]
[ 0.652130] PCI: bridge 0000:00:0b.0 64bit mmio pref: [f0000000,
fbffffff]
[ 0.652296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.652769] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.652964] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.653110] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.653275] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.676379] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
[ 0.676792] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[ 0.677191] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
[ 0.677601] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
[ 0.678008] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.678411] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.678815] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.679218] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.680080] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.680485] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.680888] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.681293] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.681700] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.682102] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.682506] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.682914] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.683318] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.683721] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.684147] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.684551] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.684955] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.685359] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.685766] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.686169] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.686571] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.686977] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.687381] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.687781] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.688203] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.688609] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.689010] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.689415] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.689814] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0,
disabled.
[ 0.690223] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0,
disabled.
[ 0.690630] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0,
disabled.
[ 0.691036] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0,
disabled.
[ 0.691446] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.691855] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[ 0.692263] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
disabled.
[ 0.692673] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[ 0.693082] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
[ 0.693492] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.693896] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 0.694306] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.694787] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
[ 0.695197] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
[ 0.695611] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.695694] ACPI Warning (tbutils-0217): Incorrect checksum in table
[OEMB] - AE, should be A1 [20080609]
[ 0.695694] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.695694] pnp: PnP ACPI init
[ 0.695694] ACPI: bus type pnp registered
[ 0.700666] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0
BAR 0 (0x900-0x9ff), disabling
[ 0.700669] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0
BAR 0 (0x900-0x9ff), disabling
[ 0.710742] pnp: PnP ACPI: found 15 devices
[ 0.710743] ACPI: ACPI bus type pnp unregistered
[ 0.710758] PCI: Using ACPI for IRQ routing
[ 0.728038] NET: Registered protocol family 8
[ 0.728040] NET: Registered protocol family 20
[ 0.728051] NetLabel: Initializing
[ 0.728051] NetLabel: domain hash size = 128
[ 0.728051] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.728051] NetLabel: unlabeled traffic allowed by default
[ 0.728178] PCI-DMA: Disabling AGP.
[ 0.728584] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.728584] PCI-DMA: using GART IOMMU.
[ 0.728584] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.729382] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.729388] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.732049] Switched to high resolution mode on CPU 0
[ 0.732055] Switched to high resolution mode on CPU 3
[ 0.732058] Switched to high resolution mode on CPU 1
[ 0.732061] Switched to high resolution mode on CPU 2
[ 0.733669] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.733670] actual entries 65586
[ 0.733749] AppArmor: AppArmor Filesystem Enabled
[ 0.733777] ACPI: RTC can wake from S4
[ 0.752119] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.752121] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.752123] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.752125] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.752127] system 00:06: ioport range 0x800-0x87f could not be reserved
[ 0.752129] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.752131] system 00:06: ioport range 0xd00-0xd7f has been reserved
[ 0.752132] system 00:06: ioport range 0xd80-0xdff has been reserved
[ 0.752136] system 00:06: iomem range 0xfed04000-
reserved
[ 0.752137] system 00:06: iomem range 0xfee01000-
reserved
[ 0.752144] system 00:09: iomem range 0xfec00000-
reserved
[ 0.752145] system 00:09: iomem range 0xfee00000-
reserved
[ 0.752147] system 00:09: iomem range 0xdc000000-
reserved
[ 0.752152] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.752154] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.752156] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.752158] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.752163] system 00:0d: iomem range 0xe0000000-
reserved
[ 0.752167] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.752169] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.752171] system 00:0e: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.752172] system 00:0e: iomem range 0x100000-0xdfffffff could not be
reserved
[ 0.752174] system 00:0e: iomem range 0xfed45000-
reserved
[ 0.757232] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.757234] pci 0000:00:08.0: IO window: disabled
[ 0.757238] pci 0000:00:08.0: MEM window: 0xfcf00000-
[ 0.757240] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.757244] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.757245] pci 0000:00:0b.0: IO window: 0xe000-0xefff
[ 0.757248] pci 0000:00:0b.0: MEM window: 0xfd000000-
[ 0.757250] pci 0000:00:0b.0: PREFETCH window:
0x000000f000000
[ 0.757253] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.757254] pci 0000:00:10.0: IO window: disabled
[ 0.757263] pci 0000:00:10.0: MEM window: disabled
[ 0.757269] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.757281] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
[ 0.757282] pci 0000:00:12.0: IO window: disabled
[ 0.757291] pci 0000:00:12.0: MEM window: disabled
[ 0.757297] pci 0000:00:12.0: PREFETCH window: disabled
[ 0.757314] pci 0000:00:08.0: setting latency timer to 64
[ 0.757318] pci 0000:00:0b.0: setting latency timer to 64
[ 0.757887] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.757896] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level,
low) -> IRQ 19
[ 0.757904] pci 0000:00:10.0: setting latency timer to 64
[ 0.758444] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.758450] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level,
low) -> IRQ 18
[ 0.758458] pci 0000:00:12.0: setting latency timer to 64
[ 0.758462] bus: 00 index 0 io port: [0, ffff]
[ 0.758464] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.758465] bus: 01 index 0 mmio: [0, 0]
[ 0.758467] bus: 01 index 1 mmio: [fcf00000, fcffffff]
[ 0.758468] bus: 01 index 2 mmio: [0, 0]
[ 0.758469] bus: 01 index 3 io port: [0, ffff]
[ 0.758470] bus: 01 index 4 mmio: [0, ffffffffffffffff]
[ 0.758471] bus: 02 index 0 io port: [e000, efff]
[ 0.758473] bus: 02 index 1 mmio: [fd000000, febfffff]
[ 0.758474] bus: 02 index 2 mmio: [f0000000, fbffffff]
[ 0.758475] bus: 02 index 3 mmio: [0, 0]
[ 0.758476] bus: 03 index 0 mmio: [0, 0]
[ 0.758477] bus: 03 index 1 mmio: [0, 0]
[ 0.758478] bus: 03 index 2 mmio: [0, 0]
[ 0.758479] bus: 03 index 3 mmio: [0, 0]
[ 0.758481] bus: 04 index 0 mmio: [0, 0]
[ 0.758482] bus: 04 index 1 mmio: [0, 0]
[ 0.758483] bus: 04 index 2 mmio: [0, 0]
[ 0.758484] bus: 04 index 3 mmio: [0, 0]
[ 0.758494] NET: Registered protocol family 2
[ 0.796465] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.797507] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.800046] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.800357] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.800359] TCP reno registered
[ 0.812277] NET: Registered protocol family 1
[ 0.812375] checking if image is initramfs... it is
[ 1.320972] Freeing initrd memory: 8430k freed
[ 1.325175] audit: initializing netlink socket (disabled)
[ 1.325186] type=2000 audit(122787471
[ 1.329426] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.331763] VFS: Disk quotas dquot_6.5.1
[ 1.331835] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.331918] msgmni has been set to 7791
[ 1.332028] io scheduler noop registered
[ 1.332030] io scheduler anticipatory registered
[ 1.332031] io scheduler deadline registered
[ 1.332137] io scheduler cfq registered (default)
[ 1.400201] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.400229] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.400258] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.400285] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.400339] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.400404] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 1.400448] pci 0000:02:00.0: Boot video device
[ 1.400578] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 1.400743] pcieport-driver 0000:00:10.0: found MSI capability
[ 1.400856] pci_express 0000:00:
[ 1.401098] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 1.401262] pcieport-driver 0000:00:12.0: found MSI capability
[ 1.401371] pci_express 0000:00:
[ 1.432959] hpet_resources: 0xfed00000 is busy
[ 1.433051] Linux agpgart interface v0.103
[ 1.433055] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.433183] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.433755] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.435232] brd: module loaded
[ 1.435290] input: Macintosh mouse button emulation as
/devices/
[ 1.435389] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.435390] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 1.435511] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.448192] mice: PS/2 mouse device common for all mice
[ 1.448300] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.448356] rtc0: alarms up to one year, y3k, hpet irqs
[ 1.448390] cpuidle: using governor ladder
[ 1.448392] cpuidle: using governor menu
[ 1.448690] TCP cubic registered
[ 1.448878] registered taskstats version 1
[ 1.448984] Magic number: 0:678:330
[ 1.449035] tty tty51: hash matches
[ 1.449124] rtc_cmos 00:08: setting system clock to 2008-11-28 12:18:34
UTC (1227874714)
[ 1.449126] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.449127] EDD information not available.
[ 1.449167] Freeing unused kernel memory: 536k freed
[ 1.449359] Write protecting the kernel read-only data: 4348k
[ 1.477960] input: AT Translated Set 2 keyboard as
/devices/
[ 1.550359] fuse init (API version 7.9)
[ 1.565173] processor ACPI0007:00: registered as cooling_device0
[ 1.565229] processor ACPI0007:01: registered as cooling_device1
[ 1.565284] processor ACPI0007:02: registered as cooling_device2
[ 1.565340] processor ACPI0007:03: registered as cooling_device3
[ 1.763178] usbcore: registered new interface driver usbfs
[ 1.763196] usbcore: registered new interface driver hub
[ 1.763225] usbcore: registered new device driver usb
[ 1.768998] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 1.769009] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23
(level, low) -> IRQ 23
[ 1.769019] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.769021] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.769057] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 1.769087] ehci_hcd 0000:00:02.1: debug port 1
[ 1.769091] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.769107] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfce7fc00
[ 1.770466] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 1.771566] No dock devices found.
[ 1.780046] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 1.780165] usb usb1: configuration #1 chosen from 1 choice
[ 1.780187] hub 1-0:1.0: USB hub found
[ 1.780193] hub 1-0:1.0: 6 ports detected
[ 1.789776] SCSI subsystem initialized
[ 1.802507] libata version 3.00 loaded.
[ 1.988783] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
[ 1.988795] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22
(level, low) -> IRQ 22
[ 1.988807] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.988810] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.988830] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 2
[ 1.988854] ehci_hcd 0000:00:04.1: debug port 1
[ 1.988857] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 1.988874] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfce7f800
[ 2.112556] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 2.112686] usb usb2: configuration #1 chosen from 1 choice
[ 2.112711] hub 2-0:1.0: USB hub found
[ 2.112718] hub 2-0:1.0: 6 ports detected
[ 2.316890] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 2.316936] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21
(level, low) -> IRQ 21
[ 2.316948] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.316951] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.316971] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 3
[ 2.316993] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfce7e000
[ 2.374188] usb usb3: configuration #1 chosen from 1 choice
[ 2.374212] hub 3-0:1.0: USB hub found
[ 2.374235] hub 3-0:1.0: 6 ports detected
[ 2.428271] usb 2-1: new high speed USB device using ehci_hcd and address
2
[ 2.563271] usb 2-1: configuration #1 chosen from 1 choice
[ 2.581039] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
[ 2.581050] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20
(level, low) -> IRQ 20
[ 2.581063] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 2.581065] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 2.581084] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 4
[ 2.581105] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfce7d000
[ 2.638265] usb usb4: configuration #1 chosen from 1 choice
[ 2.638288] hub 4-0:1.0: USB hub found
[ 2.638295] hub 4-0:1.0: 6 ports detected
[ 2.792028] usb 3-3: new full speed USB device using ohci_hcd and address
2
[ 2.848430] pata_amd 0000:00:06.0: version 0.3.10
[ 2.848463] pata_amd 0000:00:06.0: setting latency timer to 64
[ 2.848537] scsi0 : pata_amd
[ 2.848612] scsi1 : pata_amd
[ 2.849858] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq
14
[ 2.849860] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq
15
[ 3.006827] usb 3-3: configuration #1 chosen from 1 choice
[ 3.116240] ata1.01: NODEV after polling detection
[ 3.141195] ata1.00: failed to set max address (err_mask=0x1)
[ 3.141197] ata1.00: device aborted resize (321672960 ->
184467440736956
[ 3.141201] ata1.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
[ 3.141203] ata1.00: 321672960 sectors, multi 16: LBA48
[ 3.141208] ata1.00: Drive reports diagnostics failure. This may indicate
a drive
[ 3.141209] ata1.00: fault or invalid emulation. Contact drive vendor for
information.
[ 3.141214] ata1: nv_mode_filter: 0x7f39f&
(0xc7000000) ACPI=0x7f01f (15:900:0x11)
[ 3.156358] ata1.00: configured for UDMA/133
[ 3.156393] ata2: port disabled. ignoring.
[ 3.156479] scsi 0:0:0:0: Direct-Access ATA HDT722516DLAT80
V43O PQ: 0 ANSI: 5
[ 3.157804] ahci 0000:00:09.0: version 3.0
[ 3.158332] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 3.158335] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level,
low) -> IRQ 23
[ 3.158408] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl IDE mode
[ 3.158411] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 3.158414] ahci 0000:00:09.0: setting latency timer to 64
[ 3.158669] scsi2 : ahci
[ 3.159632] scsi3 : ahci
[ 3.160600] scsi4 : ahci
[ 3.161530] scsi5 : ahci
[ 3.162473] scsi6 : ahci
[ 3.163440] scsi7 : ahci
[ 3.163533] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100
irq 2301
[ 3.163535] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180
irq 2301
[ 3.163537] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200
irq 2301
[ 3.163539] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280
irq 2301
[ 3.163541] ata7: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300
irq 2301
[ 3.163543] ata8: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380
irq 2301
[ 3.184132] usb 4-3: new low speed USB device using ohci_hcd and address
2
[ 3.396197] usb 4-3: configuration #1 chosen from 1 choice
[ 3.480226] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.800134] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.284097] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.287483] ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 4.291552] ata5.00: configured for UDMA/100
[ 4.608122] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.928155] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.248061] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.251224] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15
IL00 PQ: 0 ANSI: 5
[ 5.266057] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.266086] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 5.280674] usbcore: registered new interface driver hiddev
[ 5.285208] Driver 'sd' needs updating - please use bus_type methods
[ 5.285300] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
MB)
[ 5.285312] sd 0:0:0:0: [sda] Write Protect is off
[ 5.285314] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.285332] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.285390] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
MB)
[ 5.285401] sd 0:0:0:0: [sda] Write Protect is off
[ 5.285402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.285421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.285423] sda:<6>input: USB Mouse as
/devices/
[ 5.287261] Driver 'sr' needs updating - please use bus_type methods
[ 5.299919] sda1 sda2 <<6>input,hidraw0: USB HID v1.10 Mouse [USB Mouse]
on usb-0000:00:04.0-3
[ 5.301193] usbcore: registered new interface driver usbhid
[ 5.301197] usbhid: v2.6:USB HID core driver
[ 5.311068] sda5 sda6 sda7 >
[ 5.342127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.563175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 5.563179] Uniform CD-ROM driver Revision: 3.20
[ 5.563257] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.270711] PM: Starting manual resume from disk
[ 6.270714] PM: Resume from partition 8:7
[ 6.270715] PM: Checking hibernation image.
[ 6.270849] PM: Resume from disk failed.
[ 6.315203] kjournald starting. Commit interval 5 seconds
[ 6.315220] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.374470] udevd version 124 started
[ 11.620965] input: Power Button (FF) as
/devices/
[ 11.644527] ACPI: Power Button (FF) [PWRF]
[ 11.644629] input: Power Button (CM) as
/devices/
[ 11.676522] ACPI: Power Button (CM) [PWRB]
[ 11.906687] parport_pc 00:05: reported by Plug and Play ACPI
[ 11.906733] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 11.908094] ACPI: WMI: Mapper loaded
[ 12.063550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.066183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.192467] input: PC Speaker as /devices/
[ 12.229373] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2
vid 0x03F0 pid 0x2C17
[ 12.229397] usbcore: registered new interface driver usblp
[ 12.547199] nvidia: module license 'NVIDIA' taints kernel.
[ 12.817784] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
[ 12.817790] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 22
(level, low) -> IRQ 22
[ 12.817795] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.817944] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed
Oct 1 14:43:46 PDT 2008
[ 13.021023] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
[ 13.021034] rt61pci 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17
(level, low) -> IRQ 17
[ 13.028428] phy0: Selected rate control algorithm 'pid'
[ 13.119014] Registered led device: rt61pci-phy0:radio
[ 13.119028] Registered led device: rt61pci-phy0:assoc
[ 13.540411] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 13.540973] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 13.540977] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21
(level, low) -> IRQ 21
[ 13.540991] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 13.568525] hda-intel: no codecs initialized
[ 13.568559] HDA Intel 0000:00:07.0: PCI INT A disabled
[ 14.367812] lp0: using parport0 (interrupt-driven).
[ 14.496360] Adding 1060248k swap on /dev/sda7. Priority:-1 extents:1
across:1060248k
[ 15.042956] EXT3 FS on sda6, internal journal
[ 16.011305] type=1505 audit(122788192
name="/
[ 16.131860] type=1505 audit(122788192
name="/
[ 16.132019] type=1505 audit(122788192
name="/
[ 16.256686] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.999061] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor
processors (4 cpu cores) (version 2.20.00)
[ 16.999474] powernow-k8: 0 : pstate 0 (2600 MHz)
[ 16.999477] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 17.617814] warning: `avahi-daemon' uses 32-bit capabilities (legacy
support in use)
[ 17.804204] ppdev: user-space parallel port driver
[ 21.195105] Bluetooth: Core ver 2.13
[ 21.196157] NET: Registered protocol family 31
[ 21.196164] Bluetooth: HCI device and connection manager initialized
[ 21.196168] Bluetooth: HCI socket layer initialized
[ 21.214325] Bluetooth: L2CAP ver 2.11
[ 21.214333] Bluetooth: L2CAP socket layer initialized
[ 21.313246] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.313253] Bluetooth: SCO socket layer initialized
[ 21.397209] Bluetooth: RFCOMM socket layer initialized
[ 21.397236] Bluetooth: RFCOMM TTY layer initialized
[ 21.397239] Bluetooth: RFCOMM ver 1.10
[ 21.424374] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.424385] Bluetooth: BNEP filters: protocol multicast
[ 21.511044] Bridge firewalling registered
[ 21.511274] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 25.582627] firmware: requesting rt2561s.bin
[ 25.894496] NET: Registered protocol family 17
[ 26.540581] wlan0: authenticate with AP 00:e0:4c:f6:ed:c5
[ 26.542146] wlan0: authenticated
[ 26.542157] wlan0: associate with AP 00:e0:4c:f6:ed:c5
[ 26.549943] wlan0: RX AssocResp from 00:e0:4c:f6:ed:c5 (capab=0x401
status=0 aid=2)
[ 26.549951] wlan0: associated
[ 26.550151] wlan0: disassociating by local choice (reason=3)
[ 103.159613] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 103.159624] usb 4-3: USB disconnect, address 2
[ 103.520200] usb 4-3: new low speed USB device using ohci_hcd and address
3
[ 103.729550] usb 4-3: configuration #1 chosen from 1 choice
[ 103.739774] input: USB Mouse as
/devices/
[ 103.781657] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 109.495767] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 109.495779] usb 4-3: USB disconnect, address 3
[ 109.852348] usb 4-3: new low speed USB device using ohci_hcd and address
4
[ 110.061843] usb 4-3: configuration #1 chosen from 1 choice
[ 110.071982] input: USB Mouse as
/devices/
[ 110.113708] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 119.057571] ppdev0: registered pardevice
[ 119.104434] ppdev0: unregistered pardevice
[ 119.114784] ppdev0: registered pardevice
[ 119.160417] ppdev0: unregistered pardevice
[ 119.507498] ppdev0: registered pardevice
[ 119.552362] ppdev0: unregistered pardevice
[ 158.112988] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 158.113000] usb 4-3: USB disconnect, address 4
[ 158.488401] usb 4-3: new low speed USB device using ohci_hcd and address
5
[ 158.698117] usb 4-3: configuration #1 chosen from 1 choice
[ 158.708419] input: USB Mouse as
/devices/
[ 158.749821] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 172.065335] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 172.065347] usb 4-3: USB disconnect, address 5
[ 172.440206] usb 4-3: new low speed USB device using ohci_hcd and address
6
[ 172.649557] usb 4-3: configuration #1 chosen from 1 choice
[ 172.659802] input: USB Mouse as
/devices/
[ 172.703424] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 176.585447] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 176.585461] usb 4-3: USB disconnect, address 6
[ 176.952281] usb 4-3: new low speed USB device using ohci_hcd and address
7
[ 177.161690] usb 4-3: configuration #1 chosen from 1 choice
[ 177.171756] input: USB Mouse as
/devices/
[ 177.229687] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 219.618985] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 219.618997] usb 4-3: USB disconnect, address 7
[ 219.992130] usb 4-3: new low speed USB device using ohci_hcd and address
8
[ 220.202237] usb 4-3: configuration #1 chosen from 1 choice
[ 220.212579] input: USB Mouse as
/devices/
[ 220.253686] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 239.155410] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 239.155422] usb 4-3: USB disconnect, address 8
[ 239.520116] usb 4-3: new low speed USB device using ohci_hcd and address
9
[ 239.730459] usb 4-3: configuration #1 chosen from 1 choice
[ 239.740596] input: USB Mouse as
/devices/
[ 239.783139] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 270.404599] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 270.404611] usb 4-3: USB disconnect, address 9
[ 270.768090] usb 4-3: new low speed USB device using ohci_hcd and address
10
[ 270.978511] usb 4-3: configuration #1 chosen from 1 choice
[ 270.988542] input: USB Mouse as
/devices/
[ 271.031112] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 324.070190] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 324.070201] usb 4-3: USB disconnect, address 10
[ 324.437532] usb 4-3: new low speed USB device using ohci_hcd and address
11
[ 324.648027] usb 4-3: configuration #1 chosen from 1 choice
[ 324.657172] input: USB Mouse as
/devices/
[ 324.705725] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 327.358049] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 327.358061] usb 4-3: USB disconnect, address 11
[ 327.728390] usb 4-3: new low speed USB device using ohci_hcd and address
12
[ 327.939099] usb 4-3: configuration #1 chosen from 1 choice
[ 327.949229] input: USB Mouse as
/devices/
[ 327.997683] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
[ 335.670559] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 335.670571] usb 4-3: USB disconnect, address 12
[ 336.036238] usb 4-3: new low speed USB device using ohci_hcd and address
13
[ 336.246720] usb 4-3: configuration #1 chosen from 1 choice
[ 336.256732] input: USB Mouse as
/devices/
[ 336.297680] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:04.0-3
|
Revision history for this message
|
#12 |
Era lo mas problable que bootee bien sin una unidad, y con el disco
independiente.
Ahora bien puede ser tambien un problema de config de bios como tu
dices. Pero no conosco esa bios como para aconsejarte mejor, solo que
pongas setup bios default, y luego en auto los ide detection. Despues
leer uno por uno las opciones tu mismo para ver si encunetras algo que
pueda estar relacionado (y si el cambio no deja iniciar la mother
reseteas la pila)
Pero tambien fijate como esta puesto el cable ide (este puede que vaya
al reves porque algunos cables son distintos aunque paresca que se
puedan conectar correctamente, por ej en algunos si pones el disco
rigido en el del medio (manguera doble) el del medio anda mal para el
hd, ya que es para una unidad secundario) entonces debes hacer que la
lectora quede en el medio del cable y el disco rigido en la punta. Si
ya estaba asi, debes probar sacando del mother y poniendo esa punta
del mother al disco rigido y la otra punta al mother. Asi probar hasta
ver de que modo la transefencia de datos es la correcta (puede que uno
lo ponga como viene y lo detecte pero siempre da fallos, que en otros
sistemas uno ni se entera, salvo cuando algun cd no te lo lee apenas
lo colocas)
2008/11/28 Pedro <email address hidden>:
> Question #51844 on Ubuntu changed:
> https:/
>
> Status: Answered => Open
>
> Pedro is still having a problem:
> Ivancete:
>
> La PC la armé yo, y es posible que aún reste configurar algun parametro en
> el Bios.
> dado que este motheroard posee un solo puerto para un cable IDE (provisto
> por Asus junto con el mother), y a él tengo conectados el HDD y un CD-RW,
> siguendo las indicaciones que me sugeriste, desconecté el CD-RW.
> El booteo pareció normal, igualmente poseto más abajo el dmesg de este
> arranque.
> Por otro lado, creo igual que debe de existir alguna otra solucion (quiza de
> configuración del Bios o el Kernel) para que me permita a futuro bootear con
> esta unidad conectada, ya que la necesito.
>
>
> aqui va el dmesg:
>
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version
> 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu
> 2.6.27-
> [ 0.000000] Command line: root=UUID=
> ro quiet splash
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbf90000 (usable)
> [ 0.000000] BIOS-e820: 00000000dbf90000 - 00000000dbf9e000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000dbf9e000 - 00000000dbfe0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000dbfe0000 - 00000000dbfee000 (reserved)
> [ 0.000000] BIOS-e820: 00000000dbff0000 - 00000000dc000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
> [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
> [ 0.000000] last_pfn = 0xdbf90 max_arch_pfn = 0x3ffffffff
> [ 0.000000] init_memory_mapping
> [ 0.000000] 0000000000 - 00dbe00000 page 2M
> [ 0.000000] 00dbe00000 - 00dbf90000 page 4k
> [ 0.000000] kernel direct mapping tables up to dbf90000 @ 8000-e000
> [ 0.000000] last_map_addr: dbf90000 end: dbf90000
> [ 0.000000] init_memory_mapping
> [ 0.000000] 0100000000 - 0120000000 page 2M
> [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
> [ 0.000000] last_map_addr: 120000000 end: 120000000
> [ 0.000000] RAMDISK: 377b4000 - 37fef87a
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP 000FB590, 0014 (r0 ACPIAM)
> [ 0.000000] ACPI: RSDT DBF90000, 0044 (r1 101508 RSDT1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: FACP DBF90200, 0084 (r1 101508 FACP1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: DSDT DBF90450, AE9D (r1 A1041 A1041000 0 INTL
> 20051117)
> [ 0.000000] ACPI: FACS DBF9E000, 0040
> [ 0.000000] ACPI: APIC DBF90390, 0080 (r1 101508 APIC1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: MCFG DBF90410, 003C (r1 101508 OEMMCFG 20081015
> MSFT 97)
> [ 0.000000] ACPI: OEMB DBF9E040, 0072 (r1 101508 OEMB1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: HPET DBF9B2F0, 0038 (r1 101508 OEMHPET0 20081015
> MSFT 97)
> [ 0.000000] ACPI: INFO DBF9E0C0, 0124 (r1 101508 AMDINFO 20081015
> MSFT 97)
> [ 0.000000] ACPI: NVHD DBF9E1F0, 0284 (r1 101508 NVHDCP 20081015
> MSFT 97)
> [ 0.000000] ACPI: SSDT DBF9B330, 0544 (r1 A_M_I_ POWERNOW 1
> AMD 1)
> [ 0.000000] Scanning NUMA topology in Northbridge 24
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 000000000000000
> [ 0.000000] Bootmem setup node 0 000000000000000
> [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
> [ 0.000000] bootmap [000000000000d000 - 0000000000030fff] pages 24
> [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
> [0000006000 - 0000008000]
> [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==>
> [0000200000 - 00008b8f9c]
> [ 0.000000] #3 [00377b4000 - 0037fef87a] RAMDISK ==>
> [00377b4000 - 0037fef87a]
> [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==>
> [000009ec00 - 0000100000]
> [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==>
> [0000008000 - 000000c000]
> [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==>
> [000000c000 - 000000d000]
> [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
> [ 0.000000] [ffffe200000000
> [ffff8800282000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00120000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009e
> [ 0.000000] 0: 0x00000100 -> 0x000dbf90
> [ 0.000000] 0: 0x00100000 -> 0x00120000
> [ 0.000000] On node 0 totalpages: 1031982
> [ 0.000000] DMA zone: 2107 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 880592 pages, LIFO batch:31
> [ 0.000000] Normal zone: 129024 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x508
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] ACPI: IRQ14 used by override.
> [ 0.000000] ACPI: IRQ15 used by override.
> [ 0.000000] Setting APIC routing to flat
> [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
> 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000e3000
> [ 0.000000] PM: Registered nosave memory: 00000000000e3000 -
> 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000dbf90000 -
> 00000000dbf9e000
> [ 0.000000] PM: Registered nosave memory: 00000000dbf9e000 -
> 00000000dbfe0000
> [ 0.000000] PM: Registered nosave memory: 00000000dbfe0000 -
> 00000000dbfee000
> [ 0.000000] PM: Registered nosave memory: 00000000dbfee000 -
> 00000000dbff0000
> [ 0.000000] PM: Registered nosave memory: 00000000dbff0000 -
> 00000000dc000000
> [ 0.000000] PM: Registered nosave memory: 00000000dc000000 -
> 00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
> 00000000fec01000
> [ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
> 00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
> 00000000fef00000
> [ 0.000000] PM: Registered nosave memory: 00000000fef00000 -
> 00000000fff00000
> [ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
> 0000000100000000
> [ 0.000000] Allocating PCI resources starting at e0000000 (gap:
> dc000000:22c00000)
> [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
> pages: 1011723
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> root=UUID=
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
> [ 0.000000] TSC: using PIT calibration value
> [ 0.000000] Detected 2599.926 MHz processor.
> [ 0.004000] spurious 8259A interrupt: IRQ7.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Checking aperture...
> [ 0.004000] No AGP bridge found
> [ 0.004000] Node 0: aperture @ 4ba6000000 size 32 MB
> [ 0.004000] Aperture beyond 4GB. Ignoring.
> [ 0.004000] Your BIOS doesn't leave a aperture memory hole
> [ 0.004000] Please enable the IOMMU option in the BIOS setup
> [ 0.004000] This costs you 64 MB of RAM
> [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
> [ 0.004000] PM: Registered nosave memory: 0000000020000000 -
> 0000000024000000
> [ 0.004000] Memory: 3981032k/4718592k available (3112k kernel code,
> 146896k reserved, 1575k data, 536k init)
> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=4, Nodes=1
> [ 0.004000] hpet clockevent registered
> [ 0.004000] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 5199.84 BogoMIPS (lpj=10399688)
> [ 0.004000] Security Framework initialized
> [ 0.004000] SELinux: Disabled at boot.
> [ 0.004000] AppArmor: AppArmor initialized
> [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304
> bytes)
> [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152
> bytes)
> [ 0.004000] Mount-cache hash table entries: 256
> [ 0.004000] Initializing cgroup subsys ns
> [ 0.004000] Initializing cgroup subsys cpuacct
> [ 0.004000] Initializing cgroup subsys memory
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 0/0 -> Node 0
> [ 0.004000] tseg: 0000000000
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 0
> [ 0.004000] using C1E aware idle routine
> [ 0.004000] ACPI: Core revision 20080609
> [ 0.007168] ACPI: Checking initramfs for custom DSDT
> [ 0.263752] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.303459] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.303463] Using local APIC timer interrupts.
> [ 0.304020] APIC timer calibration result 12499627
> [ 0.304021] Detected 12.499 MHz APIC timer.
> [ 0.304121] Booting processor 1/1 ip 6000
> [ 0.004000] Initializing CPU#1
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.15
> BogoMIPS (lpj=10400301)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 1/1 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.392330] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.392340] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.396044] System has AMD C1E enabled
> [ 0.396054] Switch to broadcast mode on CPU1
> [ 0.396090] Booting processor 2/2 ip 6000
> [ 0.004000] Initializing CPU#2
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.07
> BogoMIPS (lpj=10400144)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 2/2 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 2
> [ 0.484332] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.484341] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> [ 0.488051] Switch to broadcast mode on CPU2
> [ 0.488099] Booting processor 3/3 ip 6000
> [ 0.004000] Initializing CPU#3
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.05
> BogoMIPS (lpj=10400106)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 3/3 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 3
> [ 0.576326] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.576336] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> [ 0.580051] Brought up 4 CPUs
> [ 0.580053] Total of 4 processors activated (20800.11 BogoMIPS).
> [ 0.580051] Switch to broadcast mode on CPU3
> [ 0.580129] CPU0 attaching sched-domain:
> [ 0.580132] domain 0: span 0-3 level CPU
> [ 0.580133] groups: 0 1 2 3
> [ 0.580137] domain 1: span 0-3 level NODE
> [ 0.580138] groups: 0-3
> [ 0.580142] CPU1 attaching sched-domain:
> [ 0.580143] domain 0: span 0-3 level CPU
> [ 0.580144] groups: 1 2 3 0
> [ 0.580147] domain 1: span 0-3 level NODE
> [ 0.580149] groups: 0-3
> [ 0.580151] CPU2 attaching sched-domain:
> [ 0.580152] domain 0: span 0-3 level CPU
> [ 0.580154] groups: 2 3 0 1
> [ 0.580156] domain 1: span 0-3 level NODE
> [ 0.580158] groups: 0-3
> [ 0.580160] CPU3 attaching sched-domain:
> [ 0.580161] domain 0: span 0-3 level CPU
> [ 0.580162] groups: 3 0 1 2
> [ 0.580165] domain 1: span 0-3 level NODE
> [ 0.580166] groups: 0-3
> [ 0.580266] Switch to broadcast mode on CPU0
> [ 0.580266] net_namespace: 1552 bytes
> [ 0.580266] Booting paravirtualized kernel on bare hardware
> [ 0.580295] Time: 12:18:33 Date: 11/28/08
> [ 0.580319] NET: Registered protocol family 16
> [ 0.580334] node 0 link 0: io port [5000, ffffff]
> [ 0.580334] node 0 link 0: io port [1000, 1fff]
> [ 0.580334] TOM: 00000000e0000000 aka 3584M
> [ 0.580334] Fam 10h mmconf [e0000000, efffffff]
> [ 0.580334] node 0 link 0: mmio [e0000000, efffffff] ==> none
> [ 0.580334] node 0 link 0: mmio [a0000, bffff]
> [ 0.580334] node 0 link 0: mmio [e0000000, fe0bffff] ==> [f0000000,
> fe0bffff]
> [ 0.580334] TOM2: 0000000120000000 aka 4608M
> [ 0.580334] bus: [00,07] on node 0 link 0
> [ 0.580334] bus: 00 index 0 io port: [2000, ffff]
> [ 0.580334] bus: 00 index 1 io port: [0, 1fff]
> [ 0.580334] bus: 00 index 2 mmio: [a0000, bffff]
> [ 0.580334] bus: 00 index 3 mmio: [f0000000, ffffffff]
> [ 0.580334] bus: 00 index 4 mmio: [120000000, fcffffffff]
> [ 0.580334] ACPI: bus type pci registered
> [ 0.580334] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
> 255
> [ 0.580334] PCI: Not using MMCONFIG.
> [ 0.580334] PCI: Using configuration type 1 for base access
> [ 0.580334] PCI: Using configuration type 1 for extended access
> [ 0.580334] mtrr: your CPUs had inconsistent fixed MTRR settings
> [ 0.580334] mtrr: probably your BIOS does not setup all CPUs.
> [ 0.580334] mtrr: corrected configuration.
> [ 0.581019] ACPI: EC: Look up EC in DSDT
> [ 0.604224] ACPI: Interpreter enabled
> [ 0.604226] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.604241] ACPI: Using IOAPIC for interrupt routing
> [ 0.604323] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
> 255
> [ 0.617040] PCI: MCFG area at e0000000 reserved in ACPI motherboard
> resources
> [ 0.627379] PCI: Using MMCONFIG at e0000000 - efffffff
> [ 0.648283] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.648283] PCI: 0000:00:01.0 reg 10 io port: [900, 9ff]
> [ 0.648283] PCI: 0000:00:01.1 reg 10 io port: [e00, e3f]
> [ 0.648283] PCI: 0000:00:01.1 reg 20 io port: [600, 63f]
> [ 0.648283] PCI: 0000:00:01.1 reg 24 io port: [700, 73f]
> [ 0.648285] pci 0000:00:01.1: PME# supported from D3hot D3cold
> [ 0.648290] pci 0000:00:01.1: PME# disabled
> [ 0.648338] PCI: 0000:00:01.3 reg 10 32bit mmio: [fce80000, fcefffff]
> [ 0.648456] PCI: 0000:00:02.0 reg 10 32bit mmio: [fce7e000, fce7efff]
> [ 0.648476] pci 0000:00:02.0: supports D1
> [ 0.648477] pci 0000:00:02.0: supports D2
> [ 0.648479] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648481] pci 0000:00:02.0: PME# disabled
> [ 0.648499] PCI: 0000:00:02.1 reg 10 32bit mmio: [fce7fc00, fce7fcff]
> [ 0.648522] pci 0000:00:02.1: supports D1
> [ 0.648523] pci 0000:00:02.1: supports D2
> [ 0.648524] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648527] pci 0000:00:02.1: PME# disabled
> [ 0.648547] PCI: 0000:00:04.0 reg 10 32bit mmio: [fce7d000, fce7dfff]
> [ 0.648566] pci 0000:00:04.0: supports D1
> [ 0.648567] pci 0000:00:04.0: supports D2
> [ 0.648568] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648571] pci 0000:00:04.0: PME# disabled
> [ 0.648589] PCI: 0000:00:04.1 reg 10 32bit mmio: [fce7f800, fce7f8ff]
> [ 0.648612] pci 0000:00:04.1: supports D1
> [ 0.648613] pci 0000:00:04.1: supports D2
> [ 0.648614] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648617] pci 0000:00:04.1: PME# disabled
> [ 0.648644] PCI: 0000:00:06.0 reg 20 io port: [ffa0, ffaf]
> [ 0.648675] PCI: 0000:00:07.0 reg 10 32bit mmio: [fce78000, fce7bfff]
> [ 0.648697] pci 0000:00:07.0: PME# supported from D3hot D3cold
> [ 0.648700] pci 0000:00:07.0: PME# disabled
> [ 0.648740] PCI: 0000:00:09.0 reg 10 io port: [d480, d487]
> [ 0.648743] PCI: 0000:00:09.0 reg 14 io port: [d400, d403]
> [ 0.648745] PCI: 0000:00:09.0 reg 18 io port: [d080, d087]
> [ 0.648748] PCI: 0000:00:09.0 reg 1c io port: [d000, d003]
> [ 0.648751] PCI: 0000:00:09.0 reg 20 io port: [cc00, cc0f]
> [ 0.648754] PCI: 0000:00:09.0 reg 24 32bit mmio: [fce76000, fce77fff]
> [ 0.648784] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648786] pci 0000:00:0b.0: PME# disabled
> [ 0.648957] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648964] pci 0000:00:10.0: PME# disabled
> [ 0.649132] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.649144] pci 0000:00:12.0: PME# disabled
> [ 0.649235] PCI: 0000:01:07.0 reg 10 32bit mmio: [fcff8000, fcffffff]
> [ 0.652071] pci 0000:00:08.0: transparent bridge
> [ 0.652074] PCI: bridge 0000:00:08.0 32bit mmio: [fcf00000, fcffffff]
> [ 0.652090] PCI: 0000:02:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
> [ 0.652093] PCI: 0000:02:00.0 reg 14 32bit mmio: [f0000000, f7ffffff]
> [ 0.652098] PCI: 0000:02:00.0 reg 1c 32bit mmio: [fa000000, fbffffff]
> [ 0.652102] PCI: 0000:02:00.0 reg 24 io port: [ec00, ec7f]
> [ 0.652105] PCI: 0000:02:00.0 reg 30 32bit mmio: [febe0000, febfffff]
> [ 0.652125] PCI: bridge 0000:00:0b.0 io port: [e000, efff]
> [ 0.652127] PCI: bridge 0000:00:0b.0 32bit mmio: [fd000000, febfffff]
> [ 0.652130] PCI: bridge 0000:00:0b.0 64bit mmio pref: [f0000000,
> fbffffff]
> [ 0.652296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.652769] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.652964] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.653110] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.653275] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.676379] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.676792] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
> [ 0.677191] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.677601] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.678008] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
> [ 0.678411] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.678815] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.679218] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.680080] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.680485] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.680888] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.681293] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.681700] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
> [ 0.682102] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.682506] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.682914] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.683318] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.683721] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.684147] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.684551] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.684955] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.685359] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.685766] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.686169] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.686571] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.686977] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.687381] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.687781] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.688203] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.688609] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.689010] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.689415] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.689814] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.690223] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.690630] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.691036] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.691446] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
> [ 0.691855] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> [ 0.692263] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.692673] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
> [ 0.693082] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
> [ 0.693492] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
> [ 0.693896] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
> [ 0.694306] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> [ 0.694787] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.695197] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
> [ 0.695611] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
> [ 0.695694] ACPI Warning (tbutils-0217): Incorrect checksum in table
> [OEMB] - AE, should be A1 [20080609]
> [ 0.695694] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.695694] pnp: PnP ACPI init
> [ 0.695694] ACPI: bus type pnp registered
> [ 0.700666] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0
> BAR 0 (0x900-0x9ff), disabling
> [ 0.700669] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0
> BAR 0 (0x900-0x9ff), disabling
> [ 0.710742] pnp: PnP ACPI: found 15 devices
> [ 0.710743] ACPI: ACPI bus type pnp unregistered
> [ 0.710758] PCI: Using ACPI for IRQ routing
> [ 0.728038] NET: Registered protocol family 8
> [ 0.728040] NET: Registered protocol family 20
> [ 0.728051] NetLabel: Initializing
> [ 0.728051] NetLabel: domain hash size = 128
> [ 0.728051] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.728051] NetLabel: unlabeled traffic allowed by default
> [ 0.728178] PCI-DMA: Disabling AGP.
> [ 0.728584] PCI-DMA: aperture base @ 20000000 size 65536 KB
> [ 0.728584] PCI-DMA: using GART IOMMU.
> [ 0.728584] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> [ 0.729382] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
> [ 0.729388] hpet0: 3 32-bit timers, 25000000 Hz
> [ 0.732049] Switched to high resolution mode on CPU 0
> [ 0.732055] Switched to high resolution mode on CPU 3
> [ 0.732058] Switched to high resolution mode on CPU 1
> [ 0.732061] Switched to high resolution mode on CPU 2
> [ 0.733669] tracer: 1286 pages allocated for 65536 entries of 80 bytes
> [ 0.733670] actual entries 65586
> [ 0.733749] AppArmor: AppArmor Filesystem Enabled
> [ 0.733777] ACPI: RTC can wake from S4
> [ 0.752119] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.752121] system 00:06: ioport range 0x800-0x80f has been reserved
> [ 0.752123] system 00:06: ioport range 0x500-0x57f has been reserved
> [ 0.752125] system 00:06: ioport range 0x580-0x5ff has been reserved
> [ 0.752127] system 00:06: ioport range 0x800-0x87f could not be reserved
> [ 0.752129] system 00:06: ioport range 0x880-0x8ff has been reserved
> [ 0.752131] system 00:06: ioport range 0xd00-0xd7f has been reserved
> [ 0.752132] system 00:06: ioport range 0xd80-0xdff has been reserved
> [ 0.752136] system 00:06: iomem range 0xfed04000-
> reserved
> [ 0.752137] system 00:06: iomem range 0xfee01000-
> reserved
> [ 0.752144] system 00:09: iomem range 0xfec00000-
> reserved
> [ 0.752145] system 00:09: iomem range 0xfee00000-
> reserved
> [ 0.752147] system 00:09: iomem range 0xdc000000-
> reserved
> [ 0.752152] system 00:0b: ioport range 0x230-0x23f has been reserved
> [ 0.752154] system 00:0b: ioport range 0x290-0x29f has been reserved
> [ 0.752156] system 00:0b: ioport range 0xa00-0xa0f has been reserved
> [ 0.752158] system 00:0b: ioport range 0xa10-0xa1f has been reserved
> [ 0.752163] system 00:0d: iomem range 0xe0000000-
> reserved
> [ 0.752167] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
> [ 0.752169] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
> [ 0.752171] system 00:0e: iomem range 0xe0000-0xfffff could not be
> reserved
> [ 0.752172] system 00:0e: iomem range 0x100000-0xdfffffff could not be
> reserved
> [ 0.752174] system 00:0e: iomem range 0xfed45000-
> reserved
> [ 0.757232] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
> [ 0.757234] pci 0000:00:08.0: IO window: disabled
> [ 0.757238] pci 0000:00:08.0: MEM window: 0xfcf00000-
> [ 0.757240] pci 0000:00:08.0: PREFETCH window: disabled
> [ 0.757244] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
> [ 0.757245] pci 0000:00:0b.0: IO window: 0xe000-0xefff
> [ 0.757248] pci 0000:00:0b.0: MEM window: 0xfd000000-
> [ 0.757250] pci 0000:00:0b.0: PREFETCH window:
> 0x000000f000000
> [ 0.757253] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
> [ 0.757254] pci 0000:00:10.0: IO window: disabled
> [ 0.757263] pci 0000:00:10.0: MEM window: disabled
> [ 0.757269] pci 0000:00:10.0: PREFETCH window: disabled
> [ 0.757281] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
> [ 0.757282] pci 0000:00:12.0: IO window: disabled
> [ 0.757291] pci 0000:00:12.0: MEM window: disabled
> [ 0.757297] pci 0000:00:12.0: PREFETCH window: disabled
> [ 0.757314] pci 0000:00:08.0: setting latency timer to 64
> [ 0.757318] pci 0000:00:0b.0: setting latency timer to 64
> [ 0.757887] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
> [ 0.757896] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level,
> low) -> IRQ 19
> [ 0.757904] pci 0000:00:10.0: setting latency timer to 64
> [ 0.758444] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
> [ 0.758450] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level,
> low) -> IRQ 18
> [ 0.758458] pci 0000:00:12.0: setting latency timer to 64
> [ 0.758462] bus: 00 index 0 io port: [0, ffff]
> [ 0.758464] bus: 00 index 1 mmio: [0, ffffffffffffffff]
> [ 0.758465] bus: 01 index 0 mmio: [0, 0]
> [ 0.758467] bus: 01 index 1 mmio: [fcf00000, fcffffff]
> [ 0.758468] bus: 01 index 2 mmio: [0, 0]
> [ 0.758469] bus: 01 index 3 io port: [0, ffff]
> [ 0.758470] bus: 01 index 4 mmio: [0, ffffffffffffffff]
> [ 0.758471] bus: 02 index 0 io port: [e000, efff]
> [ 0.758473] bus: 02 index 1 mmio: [fd000000, febfffff]
> [ 0.758474] bus: 02 index 2 mmio: [f0000000, fbffffff]
> [ 0.758475] bus: 02 index 3 mmio: [0, 0]
> [ 0.758476] bus: 03 index 0 mmio: [0, 0]
> [ 0.758477] bus: 03 index 1 mmio: [0, 0]
> [ 0.758478] bus: 03 index 2 mmio: [0, 0]
> [ 0.758479] bus: 03 index 3 mmio: [0, 0]
> [ 0.758481] bus: 04 index 0 mmio: [0, 0]
> [ 0.758482] bus: 04 index 1 mmio: [0, 0]
> [ 0.758483] bus: 04 index 2 mmio: [0, 0]
> [ 0.758484] bus: 04 index 3 mmio: [0, 0]
> [ 0.758494] NET: Registered protocol family 2
> [ 0.796465] IP route cache hash table entries: 131072 (order: 8, 1048576
> bytes)
> [ 0.797507] TCP established hash table entries: 524288 (order: 11,
> 8388608 bytes)
> [ 0.800046] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.800357] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.800359] TCP reno registered
> [ 0.812277] NET: Registered protocol family 1
> [ 0.812375] checking if image is initramfs... it is
> [ 1.320972] Freeing initrd memory: 8430k freed
> [ 1.325175] audit: initializing netlink socket (disabled)
> [ 1.325186] type=2000 audit(122787471
> [ 1.329426] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.331763] VFS: Disk quotas dquot_6.5.1
> [ 1.331835] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.331918] msgmni has been set to 7791
> [ 1.332028] io scheduler noop registered
> [ 1.332030] io scheduler anticipatory registered
> [ 1.332031] io scheduler deadline registered
> [ 1.332137] io scheduler cfq registered (default)
> [ 1.400201] pci 0000:00:07.0: Enabling HT MSI Mapping
> [ 1.400229] pci 0000:00:08.0: Enabling HT MSI Mapping
> [ 1.400258] pci 0000:00:09.0: Enabling HT MSI Mapping
> [ 1.400285] pci 0000:00:0b.0: Enabling HT MSI Mapping
> [ 1.400339] pci 0000:00:10.0: Enabling HT MSI Mapping
> [ 1.400404] pci 0000:00:12.0: Enabling HT MSI Mapping
> [ 1.400448] pci 0000:02:00.0: Boot video device
> [ 1.400578] pcieport-driver 0000:00:10.0: setting latency timer to 64
> [ 1.400743] pcieport-driver 0000:00:10.0: found MSI capability
> [ 1.400856] pci_express 0000:00:
> [ 1.401098] pcieport-driver 0000:00:12.0: setting latency timer to 64
> [ 1.401262] pcieport-driver 0000:00:12.0: found MSI capability
> [ 1.401371] pci_express 0000:00:
> [ 1.432959] hpet_resources: 0xfed00000 is busy
> [ 1.433051] Linux agpgart interface v0.103
> [ 1.433055] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> [ 1.433183] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.433755] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.435232] brd: module loaded
> [ 1.435290] input: Macintosh mouse button emulation as
> /devices/
> [ 1.435389] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 1.435390] PNP: PS/2 appears to have AUX port disabled, if this is
> incorrect please boot with i8042.nopnp
> [ 1.435511] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.448192] mice: PS/2 mouse device common for all mice
> [ 1.448300] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
> [ 1.448356] rtc0: alarms up to one year, y3k, hpet irqs
> [ 1.448390] cpuidle: using governor ladder
> [ 1.448392] cpuidle: using governor menu
> [ 1.448690] TCP cubic registered
> [ 1.448878] registered taskstats version 1
> [ 1.448984] Magic number: 0:678:330
> [ 1.449035] tty tty51: hash matches
> [ 1.449124] rtc_cmos 00:08: setting system clock to 2008-11-28 12:18:34
> UTC (1227874714)
> [ 1.449126] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.449127] EDD information not available.
> [ 1.449167] Freeing unused kernel memory: 536k freed
> [ 1.449359] Write protecting the kernel read-only data: 4348k
> [ 1.477960] input: AT Translated Set 2 keyboard as
> /devices/
> [ 1.550359] fuse init (API version 7.9)
> [ 1.565173] processor ACPI0007:00: registered as cooling_device0
> [ 1.565229] processor ACPI0007:01: registered as cooling_device1
> [ 1.565284] processor ACPI0007:02: registered as cooling_device2
> [ 1.565340] processor ACPI0007:03: registered as cooling_device3
> [ 1.763178] usbcore: registered new interface driver usbfs
> [ 1.763196] usbcore: registered new interface driver hub
> [ 1.763225] usbcore: registered new device driver usb
> [ 1.768998] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
> [ 1.769009] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23
> (level, low) -> IRQ 23
> [ 1.769019] ehci_hcd 0000:00:02.1: setting latency timer to 64
> [ 1.769021] ehci_hcd 0000:00:02.1: EHCI Host Controller
> [ 1.769057] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
> number 1
> [ 1.769087] ehci_hcd 0000:00:02.1: debug port 1
> [ 1.769091] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
> [ 1.769107] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfce7fc00
> [ 1.770466] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
> (OHCI) Driver
> [ 1.771566] No dock devices found.
> [ 1.780046] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 1.780165] usb usb1: configuration #1 chosen from 1 choice
> [ 1.780187] hub 1-0:1.0: USB hub found
> [ 1.780193] hub 1-0:1.0: 6 ports detected
> [ 1.789776] SCSI subsystem initialized
> [ 1.802507] libata version 3.00 loaded.
> [ 1.988783] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
> [ 1.988795] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22
> (level, low) -> IRQ 22
> [ 1.988807] ehci_hcd 0000:00:04.1: setting latency timer to 64
> [ 1.988810] ehci_hcd 0000:00:04.1: EHCI Host Controller
> [ 1.988830] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
> number 2
> [ 1.988854] ehci_hcd 0000:00:04.1: debug port 1
> [ 1.988857] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
> [ 1.988874] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfce7f800
> [ 2.112556] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 2.112686] usb usb2: configuration #1 chosen from 1 choice
> [ 2.112711] hub 2-0:1.0: USB hub found
> [ 2.112718] hub 2-0:1.0: 6 ports detected
> [ 2.316890] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
> [ 2.316936] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21
> (level, low) -> IRQ 21
> [ 2.316948] ohci_hcd 0000:00:02.0: setting latency timer to 64
> [ 2.316951] ohci_hcd 0000:00:02.0: OHCI Host Controller
> [ 2.316971] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
> number 3
> [ 2.316993] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfce7e000
> [ 2.374188] usb usb3: configuration #1 chosen from 1 choice
> [ 2.374212] hub 3-0:1.0: USB hub found
> [ 2.374235] hub 3-0:1.0: 6 ports detected
> [ 2.428271] usb 2-1: new high speed USB device using ehci_hcd and address
> 2
> [ 2.563271] usb 2-1: configuration #1 chosen from 1 choice
> [ 2.581039] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
> [ 2.581050] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20
> (level, low) -> IRQ 20
> [ 2.581063] ohci_hcd 0000:00:04.0: setting latency timer to 64
> [ 2.581065] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [ 2.581084] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
> number 4
> [ 2.581105] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfce7d000
> [ 2.638265] usb usb4: configuration #1 chosen from 1 choice
> [ 2.638288] hub 4-0:1.0: USB hub found
> [ 2.638295] hub 4-0:1.0: 6 ports detected
> [ 2.792028] usb 3-3: new full speed USB device using ohci_hcd and address
> 2
> [ 2.848430] pata_amd 0000:00:06.0: version 0.3.10
> [ 2.848463] pata_amd 0000:00:06.0: setting latency timer to 64
> [ 2.848537] scsi0 : pata_amd
> [ 2.848612] scsi1 : pata_amd
> [ 2.849858] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq
> 14
> [ 2.849860] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq
> 15
> [ 3.006827] usb 3-3: configuration #1 chosen from 1 choice
> [ 3.116240] ata1.01: NODEV after polling detection
> [ 3.141195] ata1.00: failed to set max address (err_mask=0x1)
> [ 3.141197] ata1.00: device aborted resize (321672960 ->
> 184467440736956
> [ 3.141201] ata1.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
> [ 3.141203] ata1.00: 321672960 sectors, multi 16: LBA48
> [ 3.141208] ata1.00: Drive reports diagnostics failure. This may indicate
> a drive
> [ 3.141209] ata1.00: fault or invalid emulation. Contact drive vendor for
> information.
> [ 3.141214] ata1: nv_mode_filter: 0x7f39f&
> (0xc7000000) ACPI=0x7f01f (15:900:0x11)
> [ 3.156358] ata1.00: configured for UDMA/133
> [ 3.156393] ata2: port disabled. ignoring.
> [ 3.156479] scsi 0:0:0:0: Direct-Access ATA HDT722516DLAT80
> V43O PQ: 0 ANSI: 5
> [ 3.157804] ahci 0000:00:09.0: version 3.0
> [ 3.158332] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
> [ 3.158335] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level,
> low) -> IRQ 23
> [ 3.158408] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
> 0x3f impl IDE mode
> [ 3.158411] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
> [ 3.158414] ahci 0000:00:09.0: setting latency timer to 64
> [ 3.158669] scsi2 : ahci
> [ 3.159632] scsi3 : ahci
> [ 3.160600] scsi4 : ahci
> [ 3.161530] scsi5 : ahci
> [ 3.162473] scsi6 : ahci
> [ 3.163440] scsi7 : ahci
> [ 3.163533] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100
> irq 2301
> [ 3.163535] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180
> irq 2301
> [ 3.163537] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200
> irq 2301
> [ 3.163539] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280
> irq 2301
> [ 3.163541] ata7: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300
> irq 2301
> [ 3.163543] ata8: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380
> irq 2301
> [ 3.184132] usb 4-3: new low speed USB device using ohci_hcd and address
> 2
> [ 3.396197] usb 4-3: configuration #1 chosen from 1 choice
> [ 3.480226] ata3: SATA link down (SStatus 0 SControl 300)
> [ 3.800134] ata4: SATA link down (SStatus 0 SControl 300)
> [ 4.284097] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 4.287483] ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
> [ 4.291552] ata5.00: configured for UDMA/100
> [ 4.608122] ata6: SATA link down (SStatus 0 SControl 300)
> [ 4.928155] ata7: SATA link down (SStatus 0 SControl 300)
> [ 5.248061] ata8: SATA link down (SStatus 0 SControl 300)
> [ 5.251224] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15
> IL00 PQ: 0 ANSI: 5
> [ 5.266057] scsi 0:0:0:0: Attached scsi generic sg0 type 0
> [ 5.266086] scsi 4:0:0:0: Attached scsi generic sg1 type 5
> [ 5.280674] usbcore: registered new interface driver hiddev
> [ 5.285208] Driver 'sd' needs updating - please use bus_type methods
> [ 5.285300] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
> MB)
> [ 5.285312] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.285314] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.285332] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 5.285390] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
> MB)
> [ 5.285401] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.285402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.285421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 5.285423] sda:<6>input: USB Mouse as
> /devices/
> [ 5.287261] Driver 'sr' needs updating - please use bus_type methods
> [ 5.299919] sda1 sda2 <<6>input,hidraw0: USB HID v1.10 Mouse [USB Mouse]
> on usb-0000:00:04.0-3
> [ 5.301193] usbcore: registered new interface driver usbhid
> [ 5.301197] usbhid: v2.6:USB HID core driver
> [ 5.311068] sda5 sda6 sda7 >
> [ 5.342127] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 5.563175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
> cdda tray
> [ 5.563179] Uniform CD-ROM driver Revision: 3.20
> [ 5.563257] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 6.270711] PM: Starting manual resume from disk
> [ 6.270714] PM: Resume from partition 8:7
> [ 6.270715] PM: Checking hibernation image.
> [ 6.270849] PM: Resume from disk failed.
> [ 6.315203] kjournald starting. Commit interval 5 seconds
> [ 6.315220] EXT3-fs: mounted filesystem with ordered data mode.
> [ 11.374470] udevd version 124 started
> [ 11.620965] input: Power Button (FF) as
> /devices/
> [ 11.644527] ACPI: Power Button (FF) [PWRF]
> [ 11.644629] input: Power Button (CM) as
> /devices/
> [ 11.676522] ACPI: Power Button (CM) [PWRB]
> [ 11.906687] parport_pc 00:05: reported by Plug and Play ACPI
> [ 11.906733] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [ 11.908094] ACPI: WMI: Mapper loaded
> [ 12.063550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 12.066183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 12.192467] input: PC Speaker as /devices/
> [ 12.229373] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2
> vid 0x03F0 pid 0x2C17
> [ 12.229397] usbcore: registered new interface driver usblp
> [ 12.547199] nvidia: module license 'NVIDIA' taints kernel.
> [ 12.817784] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
> [ 12.817790] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 22
> (level, low) -> IRQ 22
> [ 12.817795] nvidia 0000:02:00.0: setting latency timer to 64
> [ 12.817944] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed
> Oct 1 14:43:46 PDT 2008
> [ 13.021023] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
> [ 13.021034] rt61pci 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17
> (level, low) -> IRQ 17
> [ 13.028428] phy0: Selected rate control algorithm 'pid'
> [ 13.119014] Registered led device: rt61pci-phy0:radio
> [ 13.119028] Registered led device: rt61pci-phy0:assoc
> [ 13.540411] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
> [ 13.540973] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
> [ 13.540977] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21
> (level, low) -> IRQ 21
> [ 13.540991] HDA Intel 0000:00:07.0: setting latency timer to 64
> [ 13.568525] hda-intel: no codecs initialized
> [ 13.568559] HDA Intel 0000:00:07.0: PCI INT A disabled
> [ 14.367812] lp0: using parport0 (interrupt-driven).
> [ 14.496360] Adding 1060248k swap on /dev/sda7. Priority:-1 extents:1
> across:1060248k
> [ 15.042956] EXT3 FS on sda6, internal journal
> [ 16.011305] type=1505 audit(122788192
> name="/
> [ 16.131860] type=1505 audit(122788192
> name="/
> [ 16.132019] type=1505 audit(122788192
> name="/
> [ 16.256686] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 16.999061] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor
> processors (4 cpu cores) (version 2.20.00)
> [ 16.999474] powernow-k8: 0 : pstate 0 (2600 MHz)
> [ 16.999477] powernow-k8: 1 : pstate 1 (1300 MHz)
> [ 17.617814] warning: `avahi-daemon' uses 32-bit capabilities (legacy
> support in use)
> [ 17.804204] ppdev: user-space parallel port driver
> [ 21.195105] Bluetooth: Core ver 2.13
> [ 21.196157] NET: Registered protocol family 31
> [ 21.196164] Bluetooth: HCI device and connection manager initialized
> [ 21.196168] Bluetooth: HCI socket layer initialized
> [ 21.214325] Bluetooth: L2CAP ver 2.11
> [ 21.214333] Bluetooth: L2CAP socket layer initialized
> [ 21.313246] Bluetooth: SCO (Voice Link) ver 0.6
> [ 21.313253] Bluetooth: SCO socket layer initialized
> [ 21.397209] Bluetooth: RFCOMM socket layer initialized
> [ 21.397236] Bluetooth: RFCOMM TTY layer initialized
> [ 21.397239] Bluetooth: RFCOMM ver 1.10
> [ 21.424374] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 21.424385] Bluetooth: BNEP filters: protocol multicast
> [ 21.511044] Bridge firewalling registered
> [ 21.511274] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> [ 25.582627] firmware: requesting rt2561s.bin
> [ 25.894496] NET: Registered protocol family 17
> [ 26.540581] wlan0: authenticate with AP 00:e0:4c:f6:ed:c5
> [ 26.542146] wlan0: authenticated
> [ 26.542157] wlan0: associate with AP 00:e0:4c:f6:ed:c5
> [ 26.549943] wlan0: RX AssocResp from 00:e0:4c:f6:ed:c5 (capab=0x401
> status=0 aid=2)
> [ 26.549951] wlan0: associated
> [ 26.550151] wlan0: disassociating by local choice (reason=3)
> [ 103.159613] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 103.159624] usb 4-3: USB disconnect, address 2
> [ 103.520200] usb 4-3: new low speed USB device using ohci_hcd and address
> 3
> [ 103.729550] usb 4-3: configuration #1 chosen from 1 choice
> [ 103.739774] input: USB Mouse as
> /devices/
> [ 103.781657] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 109.495767] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 109.495779] usb 4-3: USB disconnect, address 3
> [ 109.852348] usb 4-3: new low speed USB device using ohci_hcd and address
> 4
> [ 110.061843] usb 4-3: configuration #1 chosen from 1 choice
> [ 110.071982] input: USB Mouse as
> /devices/
> [ 110.113708] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 119.057571] ppdev0: registered pardevice
> [ 119.104434] ppdev0: unregistered pardevice
> [ 119.114784] ppdev0: registered pardevice
> [ 119.160417] ppdev0: unregistered pardevice
> [ 119.507498] ppdev0: registered pardevice
> [ 119.552362] ppdev0: unregistered pardevice
> [ 158.112988] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 158.113000] usb 4-3: USB disconnect, address 4
> [ 158.488401] usb 4-3: new low speed USB device using ohci_hcd and address
> 5
> [ 158.698117] usb 4-3: configuration #1 chosen from 1 choice
> [ 158.708419] input: USB Mouse as
> /devices/
> [ 158.749821] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 172.065335] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 172.065347] usb 4-3: USB disconnect, address 5
> [ 172.440206] usb 4-3: new low speed USB device using ohci_hcd and address
> 6
> [ 172.649557] usb 4-3: configuration #1 chosen from 1 choice
> [ 172.659802] input: USB Mouse as
> /devices/
> [ 172.703424] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 176.585447] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 176.585461] usb 4-3: USB disconnect, address 6
> [ 176.952281] usb 4-3: new low speed USB device using ohci_hcd and address
> 7
> [ 177.161690] usb 4-3: configuration #1 chosen from 1 choice
> [ 177.171756] input: USB Mouse as
> /devices/
> [ 177.229687] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 219.618985] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 219.618997] usb 4-3: USB disconnect, address 7
> [ 219.992130] usb 4-3: new low speed USB device using ohci_hcd and address
> 8
> [ 220.202237] usb 4-3: configuration #1 chosen from 1 choice
> [ 220.212579] input: USB Mouse as
> /devices/
> [ 220.253686] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 239.155410] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 239.155422] usb 4-3: USB disconnect, address 8
> [ 239.520116] usb 4-3: new low speed USB device using ohci_hcd and address
> 9
> [ 239.730459] usb 4-3: configuration #1 chosen from 1 choice
> [ 239.740596] input: USB Mouse as
> /devices/
> [ 239.783139] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 270.404599] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 270.404611] usb 4-3: USB disconnect, address 9
> [ 270.768090] usb 4-3: new low speed USB device using ohci_hcd and address
> 10
> [ 270.978511] usb 4-3: configuration #1 chosen from 1 choice
> [ 270.988542] input: USB Mouse as
> /devices/
> [ 271.031112] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 324.070190] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 324.070201] usb 4-3: USB disconnect, address 10
> [ 324.437532] usb 4-3: new low speed USB device using ohci_hcd and address
> 11
> [ 324.648027] usb 4-3: configuration #1 chosen from 1 choice
> [ 324.657172] input: USB Mouse as
> /devices/
> [ 324.705725] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 327.358049] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 327.358061] usb 4-3: USB disconnect, address 11
> [ 327.728390] usb 4-3: new low speed USB device using ohci_hcd and address
> 12
> [ 327.939099] usb 4-3: configuration #1 chosen from 1 choice
> [ 327.949229] input: USB Mouse as
> /devices/
> [ 327.997683] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 335.670559] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 335.670571] usb 4-3: USB disconnect, address 12
> [ 336.036238] usb 4-3: new low speed USB device using ohci_hcd and address
> 13
> [ 336.246720] usb 4-3: configuration #1 chosen from 1 choice
> [ 336.256732] input: USB Mouse as
> /devices/
> [ 336.297680] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
>
> --
> You received this question notification because you are an answer
> contact for Ubuntu.
>
|
Revision history for this message
|
#13 |
Otra opcion: si colocaste una grabadora de cd, esta puede que sea un
poco vieja, deberias poner el hd 160gb si te ves obligado conseguir
una nueva lectograbadora de dvd ide y solo con esa usarla compartida
con el disco rigido si te ves obligado a compartir el cable ide. a su
vez puedes grabar la imagen iso en un dvd a baja velocidad y probar la
instalcion con un dvd (que dicen que es mejor, vaya uno a saber por
qué)
2008/11/28 Pedro <email address hidden>:
> Question #51844 on Ubuntu changed:
> https:/
>
> Status: Answered => Open
>
> Pedro is still having a problem:
> Ivancete:
>
> La PC la armé yo, y es posible que aún reste configurar algun parametro en
> el Bios.
> dado que este motheroard posee un solo puerto para un cable IDE (provisto
> por Asus junto con el mother), y a él tengo conectados el HDD y un CD-RW,
> siguendo las indicaciones que me sugeriste, desconecté el CD-RW.
> El booteo pareció normal, igualmente poseto más abajo el dmesg de este
> arranque.
> Por otro lado, creo igual que debe de existir alguna otra solucion (quiza de
> configuración del Bios o el Kernel) para que me permita a futuro bootear con
> esta unidad conectada, ya que la necesito.
>
>
> aqui va el dmesg:
>
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version
> 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu
> 2.6.27-
> [ 0.000000] Command line: root=UUID=
> ro quiet splash
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbf90000 (usable)
> [ 0.000000] BIOS-e820: 00000000dbf90000 - 00000000dbf9e000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000dbf9e000 - 00000000dbfe0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000dbfe0000 - 00000000dbfee000 (reserved)
> [ 0.000000] BIOS-e820: 00000000dbff0000 - 00000000dc000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
> [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
> [ 0.000000] last_pfn = 0xdbf90 max_arch_pfn = 0x3ffffffff
> [ 0.000000] init_memory_mapping
> [ 0.000000] 0000000000 - 00dbe00000 page 2M
> [ 0.000000] 00dbe00000 - 00dbf90000 page 4k
> [ 0.000000] kernel direct mapping tables up to dbf90000 @ 8000-e000
> [ 0.000000] last_map_addr: dbf90000 end: dbf90000
> [ 0.000000] init_memory_mapping
> [ 0.000000] 0100000000 - 0120000000 page 2M
> [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
> [ 0.000000] last_map_addr: 120000000 end: 120000000
> [ 0.000000] RAMDISK: 377b4000 - 37fef87a
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP 000FB590, 0014 (r0 ACPIAM)
> [ 0.000000] ACPI: RSDT DBF90000, 0044 (r1 101508 RSDT1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: FACP DBF90200, 0084 (r1 101508 FACP1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: DSDT DBF90450, AE9D (r1 A1041 A1041000 0 INTL
> 20051117)
> [ 0.000000] ACPI: FACS DBF9E000, 0040
> [ 0.000000] ACPI: APIC DBF90390, 0080 (r1 101508 APIC1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: MCFG DBF90410, 003C (r1 101508 OEMMCFG 20081015
> MSFT 97)
> [ 0.000000] ACPI: OEMB DBF9E040, 0072 (r1 101508 OEMB1157 20081015
> MSFT 97)
> [ 0.000000] ACPI: HPET DBF9B2F0, 0038 (r1 101508 OEMHPET0 20081015
> MSFT 97)
> [ 0.000000] ACPI: INFO DBF9E0C0, 0124 (r1 101508 AMDINFO 20081015
> MSFT 97)
> [ 0.000000] ACPI: NVHD DBF9E1F0, 0284 (r1 101508 NVHDCP 20081015
> MSFT 97)
> [ 0.000000] ACPI: SSDT DBF9B330, 0544 (r1 A_M_I_ POWERNOW 1
> AMD 1)
> [ 0.000000] Scanning NUMA topology in Northbridge 24
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 000000000000000
> [ 0.000000] Bootmem setup node 0 000000000000000
> [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
> [ 0.000000] bootmap [000000000000d000 - 0000000000030fff] pages 24
> [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
> [0000006000 - 0000008000]
> [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==>
> [0000200000 - 00008b8f9c]
> [ 0.000000] #3 [00377b4000 - 0037fef87a] RAMDISK ==>
> [00377b4000 - 0037fef87a]
> [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==>
> [000009ec00 - 0000100000]
> [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==>
> [0000008000 - 000000c000]
> [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==>
> [000000c000 - 000000d000]
> [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
> [ 0.000000] [ffffe200000000
> [ffff8800282000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00120000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009e
> [ 0.000000] 0: 0x00000100 -> 0x000dbf90
> [ 0.000000] 0: 0x00100000 -> 0x00120000
> [ 0.000000] On node 0 totalpages: 1031982
> [ 0.000000] DMA zone: 2107 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 880592 pages, LIFO batch:31
> [ 0.000000] Normal zone: 129024 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x508
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] ACPI: IRQ14 used by override.
> [ 0.000000] ACPI: IRQ15 used by override.
> [ 0.000000] Setting APIC routing to flat
> [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 -
> 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000e3000
> [ 0.000000] PM: Registered nosave memory: 00000000000e3000 -
> 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000dbf90000 -
> 00000000dbf9e000
> [ 0.000000] PM: Registered nosave memory: 00000000dbf9e000 -
> 00000000dbfe0000
> [ 0.000000] PM: Registered nosave memory: 00000000dbfe0000 -
> 00000000dbfee000
> [ 0.000000] PM: Registered nosave memory: 00000000dbfee000 -
> 00000000dbff0000
> [ 0.000000] PM: Registered nosave memory: 00000000dbff0000 -
> 00000000dc000000
> [ 0.000000] PM: Registered nosave memory: 00000000dc000000 -
> 00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
> 00000000fec01000
> [ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
> 00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
> 00000000fef00000
> [ 0.000000] PM: Registered nosave memory: 00000000fef00000 -
> 00000000fff00000
> [ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
> 0000000100000000
> [ 0.000000] Allocating PCI resources starting at e0000000 (gap:
> dc000000:22c00000)
> [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
> [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
> pages: 1011723
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> root=UUID=
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
> [ 0.000000] TSC: using PIT calibration value
> [ 0.000000] Detected 2599.926 MHz processor.
> [ 0.004000] spurious 8259A interrupt: IRQ7.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Checking aperture...
> [ 0.004000] No AGP bridge found
> [ 0.004000] Node 0: aperture @ 4ba6000000 size 32 MB
> [ 0.004000] Aperture beyond 4GB. Ignoring.
> [ 0.004000] Your BIOS doesn't leave a aperture memory hole
> [ 0.004000] Please enable the IOMMU option in the BIOS setup
> [ 0.004000] This costs you 64 MB of RAM
> [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
> [ 0.004000] PM: Registered nosave memory: 0000000020000000 -
> 0000000024000000
> [ 0.004000] Memory: 3981032k/4718592k available (3112k kernel code,
> 146896k reserved, 1575k data, 536k init)
> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=4, Nodes=1
> [ 0.004000] hpet clockevent registered
> [ 0.004000] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 5199.84 BogoMIPS (lpj=10399688)
> [ 0.004000] Security Framework initialized
> [ 0.004000] SELinux: Disabled at boot.
> [ 0.004000] AppArmor: AppArmor initialized
> [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304
> bytes)
> [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152
> bytes)
> [ 0.004000] Mount-cache hash table entries: 256
> [ 0.004000] Initializing cgroup subsys ns
> [ 0.004000] Initializing cgroup subsys cpuacct
> [ 0.004000] Initializing cgroup subsys memory
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 0/0 -> Node 0
> [ 0.004000] tseg: 0000000000
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 0
> [ 0.004000] using C1E aware idle routine
> [ 0.004000] ACPI: Core revision 20080609
> [ 0.007168] ACPI: Checking initramfs for custom DSDT
> [ 0.263752] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.303459] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.303463] Using local APIC timer interrupts.
> [ 0.304020] APIC timer calibration result 12499627
> [ 0.304021] Detected 12.499 MHz APIC timer.
> [ 0.304121] Booting processor 1/1 ip 6000
> [ 0.004000] Initializing CPU#1
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.15
> BogoMIPS (lpj=10400301)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 1/1 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.392330] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.392340] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.396044] System has AMD C1E enabled
> [ 0.396054] Switch to broadcast mode on CPU1
> [ 0.396090] Booting processor 2/2 ip 6000
> [ 0.004000] Initializing CPU#2
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.07
> BogoMIPS (lpj=10400144)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 2/2 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 2
> [ 0.484332] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.484341] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> [ 0.488051] Switch to broadcast mode on CPU2
> [ 0.488099] Booting processor 3/3 ip 6000
> [ 0.004000] Initializing CPU#3
> [ 0.004000] Calibrating delay using timer specific routine.. 5200.05
> BogoMIPS (lpj=10400106)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
> bytes/line)
> [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
> [ 0.004000] CPU 3/3 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 3
> [ 0.576326] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
> [ 0.576336] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> [ 0.580051] Brought up 4 CPUs
> [ 0.580053] Total of 4 processors activated (20800.11 BogoMIPS).
> [ 0.580051] Switch to broadcast mode on CPU3
> [ 0.580129] CPU0 attaching sched-domain:
> [ 0.580132] domain 0: span 0-3 level CPU
> [ 0.580133] groups: 0 1 2 3
> [ 0.580137] domain 1: span 0-3 level NODE
> [ 0.580138] groups: 0-3
> [ 0.580142] CPU1 attaching sched-domain:
> [ 0.580143] domain 0: span 0-3 level CPU
> [ 0.580144] groups: 1 2 3 0
> [ 0.580147] domain 1: span 0-3 level NODE
> [ 0.580149] groups: 0-3
> [ 0.580151] CPU2 attaching sched-domain:
> [ 0.580152] domain 0: span 0-3 level CPU
> [ 0.580154] groups: 2 3 0 1
> [ 0.580156] domain 1: span 0-3 level NODE
> [ 0.580158] groups: 0-3
> [ 0.580160] CPU3 attaching sched-domain:
> [ 0.580161] domain 0: span 0-3 level CPU
> [ 0.580162] groups: 3 0 1 2
> [ 0.580165] domain 1: span 0-3 level NODE
> [ 0.580166] groups: 0-3
> [ 0.580266] Switch to broadcast mode on CPU0
> [ 0.580266] net_namespace: 1552 bytes
> [ 0.580266] Booting paravirtualized kernel on bare hardware
> [ 0.580295] Time: 12:18:33 Date: 11/28/08
> [ 0.580319] NET: Registered protocol family 16
> [ 0.580334] node 0 link 0: io port [5000, ffffff]
> [ 0.580334] node 0 link 0: io port [1000, 1fff]
> [ 0.580334] TOM: 00000000e0000000 aka 3584M
> [ 0.580334] Fam 10h mmconf [e0000000, efffffff]
> [ 0.580334] node 0 link 0: mmio [e0000000, efffffff] ==> none
> [ 0.580334] node 0 link 0: mmio [a0000, bffff]
> [ 0.580334] node 0 link 0: mmio [e0000000, fe0bffff] ==> [f0000000,
> fe0bffff]
> [ 0.580334] TOM2: 0000000120000000 aka 4608M
> [ 0.580334] bus: [00,07] on node 0 link 0
> [ 0.580334] bus: 00 index 0 io port: [2000, ffff]
> [ 0.580334] bus: 00 index 1 io port: [0, 1fff]
> [ 0.580334] bus: 00 index 2 mmio: [a0000, bffff]
> [ 0.580334] bus: 00 index 3 mmio: [f0000000, ffffffff]
> [ 0.580334] bus: 00 index 4 mmio: [120000000, fcffffffff]
> [ 0.580334] ACPI: bus type pci registered
> [ 0.580334] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
> 255
> [ 0.580334] PCI: Not using MMCONFIG.
> [ 0.580334] PCI: Using configuration type 1 for base access
> [ 0.580334] PCI: Using configuration type 1 for extended access
> [ 0.580334] mtrr: your CPUs had inconsistent fixed MTRR settings
> [ 0.580334] mtrr: probably your BIOS does not setup all CPUs.
> [ 0.580334] mtrr: corrected configuration.
> [ 0.581019] ACPI: EC: Look up EC in DSDT
> [ 0.604224] ACPI: Interpreter enabled
> [ 0.604226] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.604241] ACPI: Using IOAPIC for interrupt routing
> [ 0.604323] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
> 255
> [ 0.617040] PCI: MCFG area at e0000000 reserved in ACPI motherboard
> resources
> [ 0.627379] PCI: Using MMCONFIG at e0000000 - efffffff
> [ 0.648283] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.648283] PCI: 0000:00:01.0 reg 10 io port: [900, 9ff]
> [ 0.648283] PCI: 0000:00:01.1 reg 10 io port: [e00, e3f]
> [ 0.648283] PCI: 0000:00:01.1 reg 20 io port: [600, 63f]
> [ 0.648283] PCI: 0000:00:01.1 reg 24 io port: [700, 73f]
> [ 0.648285] pci 0000:00:01.1: PME# supported from D3hot D3cold
> [ 0.648290] pci 0000:00:01.1: PME# disabled
> [ 0.648338] PCI: 0000:00:01.3 reg 10 32bit mmio: [fce80000, fcefffff]
> [ 0.648456] PCI: 0000:00:02.0 reg 10 32bit mmio: [fce7e000, fce7efff]
> [ 0.648476] pci 0000:00:02.0: supports D1
> [ 0.648477] pci 0000:00:02.0: supports D2
> [ 0.648479] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648481] pci 0000:00:02.0: PME# disabled
> [ 0.648499] PCI: 0000:00:02.1 reg 10 32bit mmio: [fce7fc00, fce7fcff]
> [ 0.648522] pci 0000:00:02.1: supports D1
> [ 0.648523] pci 0000:00:02.1: supports D2
> [ 0.648524] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648527] pci 0000:00:02.1: PME# disabled
> [ 0.648547] PCI: 0000:00:04.0 reg 10 32bit mmio: [fce7d000, fce7dfff]
> [ 0.648566] pci 0000:00:04.0: supports D1
> [ 0.648567] pci 0000:00:04.0: supports D2
> [ 0.648568] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648571] pci 0000:00:04.0: PME# disabled
> [ 0.648589] PCI: 0000:00:04.1 reg 10 32bit mmio: [fce7f800, fce7f8ff]
> [ 0.648612] pci 0000:00:04.1: supports D1
> [ 0.648613] pci 0000:00:04.1: supports D2
> [ 0.648614] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648617] pci 0000:00:04.1: PME# disabled
> [ 0.648644] PCI: 0000:00:06.0 reg 20 io port: [ffa0, ffaf]
> [ 0.648675] PCI: 0000:00:07.0 reg 10 32bit mmio: [fce78000, fce7bfff]
> [ 0.648697] pci 0000:00:07.0: PME# supported from D3hot D3cold
> [ 0.648700] pci 0000:00:07.0: PME# disabled
> [ 0.648740] PCI: 0000:00:09.0 reg 10 io port: [d480, d487]
> [ 0.648743] PCI: 0000:00:09.0 reg 14 io port: [d400, d403]
> [ 0.648745] PCI: 0000:00:09.0 reg 18 io port: [d080, d087]
> [ 0.648748] PCI: 0000:00:09.0 reg 1c io port: [d000, d003]
> [ 0.648751] PCI: 0000:00:09.0 reg 20 io port: [cc00, cc0f]
> [ 0.648754] PCI: 0000:00:09.0 reg 24 32bit mmio: [fce76000, fce77fff]
> [ 0.648784] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648786] pci 0000:00:0b.0: PME# disabled
> [ 0.648957] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.648964] pci 0000:00:10.0: PME# disabled
> [ 0.649132] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.649144] pci 0000:00:12.0: PME# disabled
> [ 0.649235] PCI: 0000:01:07.0 reg 10 32bit mmio: [fcff8000, fcffffff]
> [ 0.652071] pci 0000:00:08.0: transparent bridge
> [ 0.652074] PCI: bridge 0000:00:08.0 32bit mmio: [fcf00000, fcffffff]
> [ 0.652090] PCI: 0000:02:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
> [ 0.652093] PCI: 0000:02:00.0 reg 14 32bit mmio: [f0000000, f7ffffff]
> [ 0.652098] PCI: 0000:02:00.0 reg 1c 32bit mmio: [fa000000, fbffffff]
> [ 0.652102] PCI: 0000:02:00.0 reg 24 io port: [ec00, ec7f]
> [ 0.652105] PCI: 0000:02:00.0 reg 30 32bit mmio: [febe0000, febfffff]
> [ 0.652125] PCI: bridge 0000:00:0b.0 io port: [e000, efff]
> [ 0.652127] PCI: bridge 0000:00:0b.0 32bit mmio: [fd000000, febfffff]
> [ 0.652130] PCI: bridge 0000:00:0b.0 64bit mmio pref: [f0000000,
> fbffffff]
> [ 0.652296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.652769] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.652964] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.653110] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.653275] ACPI: PCI Interrupt Routing Table [\_SB_.
> [ 0.676379] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.676792] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
> [ 0.677191] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.677601] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.678008] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
> [ 0.678411] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.678815] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.679218] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.680080] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.680485] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.680888] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.681293] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.681700] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
> [ 0.682102] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.682506] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.682914] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.683318] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.683721] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.684147] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.684551] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.684955] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.685359] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.685766] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.686169] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.686571] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.686977] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.687381] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.687781] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.688203] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.688609] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.689010] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.689415] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.689814] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.690223] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.690630] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.691036] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.691446] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
> [ 0.691855] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> [ 0.692263] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.692673] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
> [ 0.693082] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
> [ 0.693492] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
> [ 0.693896] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
> [ 0.694306] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> [ 0.694787] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.695197] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
> [ 0.695611] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
> [ 0.695694] ACPI Warning (tbutils-0217): Incorrect checksum in table
> [OEMB] - AE, should be A1 [20080609]
> [ 0.695694] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.695694] pnp: PnP ACPI init
> [ 0.695694] ACPI: bus type pnp registered
> [ 0.700666] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0
> BAR 0 (0x900-0x9ff), disabling
> [ 0.700669] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0
> BAR 0 (0x900-0x9ff), disabling
> [ 0.710742] pnp: PnP ACPI: found 15 devices
> [ 0.710743] ACPI: ACPI bus type pnp unregistered
> [ 0.710758] PCI: Using ACPI for IRQ routing
> [ 0.728038] NET: Registered protocol family 8
> [ 0.728040] NET: Registered protocol family 20
> [ 0.728051] NetLabel: Initializing
> [ 0.728051] NetLabel: domain hash size = 128
> [ 0.728051] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.728051] NetLabel: unlabeled traffic allowed by default
> [ 0.728178] PCI-DMA: Disabling AGP.
> [ 0.728584] PCI-DMA: aperture base @ 20000000 size 65536 KB
> [ 0.728584] PCI-DMA: using GART IOMMU.
> [ 0.728584] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> [ 0.729382] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
> [ 0.729388] hpet0: 3 32-bit timers, 25000000 Hz
> [ 0.732049] Switched to high resolution mode on CPU 0
> [ 0.732055] Switched to high resolution mode on CPU 3
> [ 0.732058] Switched to high resolution mode on CPU 1
> [ 0.732061] Switched to high resolution mode on CPU 2
> [ 0.733669] tracer: 1286 pages allocated for 65536 entries of 80 bytes
> [ 0.733670] actual entries 65586
> [ 0.733749] AppArmor: AppArmor Filesystem Enabled
> [ 0.733777] ACPI: RTC can wake from S4
> [ 0.752119] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.752121] system 00:06: ioport range 0x800-0x80f has been reserved
> [ 0.752123] system 00:06: ioport range 0x500-0x57f has been reserved
> [ 0.752125] system 00:06: ioport range 0x580-0x5ff has been reserved
> [ 0.752127] system 00:06: ioport range 0x800-0x87f could not be reserved
> [ 0.752129] system 00:06: ioport range 0x880-0x8ff has been reserved
> [ 0.752131] system 00:06: ioport range 0xd00-0xd7f has been reserved
> [ 0.752132] system 00:06: ioport range 0xd80-0xdff has been reserved
> [ 0.752136] system 00:06: iomem range 0xfed04000-
> reserved
> [ 0.752137] system 00:06: iomem range 0xfee01000-
> reserved
> [ 0.752144] system 00:09: iomem range 0xfec00000-
> reserved
> [ 0.752145] system 00:09: iomem range 0xfee00000-
> reserved
> [ 0.752147] system 00:09: iomem range 0xdc000000-
> reserved
> [ 0.752152] system 00:0b: ioport range 0x230-0x23f has been reserved
> [ 0.752154] system 00:0b: ioport range 0x290-0x29f has been reserved
> [ 0.752156] system 00:0b: ioport range 0xa00-0xa0f has been reserved
> [ 0.752158] system 00:0b: ioport range 0xa10-0xa1f has been reserved
> [ 0.752163] system 00:0d: iomem range 0xe0000000-
> reserved
> [ 0.752167] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
> [ 0.752169] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
> [ 0.752171] system 00:0e: iomem range 0xe0000-0xfffff could not be
> reserved
> [ 0.752172] system 00:0e: iomem range 0x100000-0xdfffffff could not be
> reserved
> [ 0.752174] system 00:0e: iomem range 0xfed45000-
> reserved
> [ 0.757232] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
> [ 0.757234] pci 0000:00:08.0: IO window: disabled
> [ 0.757238] pci 0000:00:08.0: MEM window: 0xfcf00000-
> [ 0.757240] pci 0000:00:08.0: PREFETCH window: disabled
> [ 0.757244] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
> [ 0.757245] pci 0000:00:0b.0: IO window: 0xe000-0xefff
> [ 0.757248] pci 0000:00:0b.0: MEM window: 0xfd000000-
> [ 0.757250] pci 0000:00:0b.0: PREFETCH window:
> 0x000000f000000
> [ 0.757253] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
> [ 0.757254] pci 0000:00:10.0: IO window: disabled
> [ 0.757263] pci 0000:00:10.0: MEM window: disabled
> [ 0.757269] pci 0000:00:10.0: PREFETCH window: disabled
> [ 0.757281] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
> [ 0.757282] pci 0000:00:12.0: IO window: disabled
> [ 0.757291] pci 0000:00:12.0: MEM window: disabled
> [ 0.757297] pci 0000:00:12.0: PREFETCH window: disabled
> [ 0.757314] pci 0000:00:08.0: setting latency timer to 64
> [ 0.757318] pci 0000:00:0b.0: setting latency timer to 64
> [ 0.757887] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
> [ 0.757896] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level,
> low) -> IRQ 19
> [ 0.757904] pci 0000:00:10.0: setting latency timer to 64
> [ 0.758444] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
> [ 0.758450] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level,
> low) -> IRQ 18
> [ 0.758458] pci 0000:00:12.0: setting latency timer to 64
> [ 0.758462] bus: 00 index 0 io port: [0, ffff]
> [ 0.758464] bus: 00 index 1 mmio: [0, ffffffffffffffff]
> [ 0.758465] bus: 01 index 0 mmio: [0, 0]
> [ 0.758467] bus: 01 index 1 mmio: [fcf00000, fcffffff]
> [ 0.758468] bus: 01 index 2 mmio: [0, 0]
> [ 0.758469] bus: 01 index 3 io port: [0, ffff]
> [ 0.758470] bus: 01 index 4 mmio: [0, ffffffffffffffff]
> [ 0.758471] bus: 02 index 0 io port: [e000, efff]
> [ 0.758473] bus: 02 index 1 mmio: [fd000000, febfffff]
> [ 0.758474] bus: 02 index 2 mmio: [f0000000, fbffffff]
> [ 0.758475] bus: 02 index 3 mmio: [0, 0]
> [ 0.758476] bus: 03 index 0 mmio: [0, 0]
> [ 0.758477] bus: 03 index 1 mmio: [0, 0]
> [ 0.758478] bus: 03 index 2 mmio: [0, 0]
> [ 0.758479] bus: 03 index 3 mmio: [0, 0]
> [ 0.758481] bus: 04 index 0 mmio: [0, 0]
> [ 0.758482] bus: 04 index 1 mmio: [0, 0]
> [ 0.758483] bus: 04 index 2 mmio: [0, 0]
> [ 0.758484] bus: 04 index 3 mmio: [0, 0]
> [ 0.758494] NET: Registered protocol family 2
> [ 0.796465] IP route cache hash table entries: 131072 (order: 8, 1048576
> bytes)
> [ 0.797507] TCP established hash table entries: 524288 (order: 11,
> 8388608 bytes)
> [ 0.800046] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.800357] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.800359] TCP reno registered
> [ 0.812277] NET: Registered protocol family 1
> [ 0.812375] checking if image is initramfs... it is
> [ 1.320972] Freeing initrd memory: 8430k freed
> [ 1.325175] audit: initializing netlink socket (disabled)
> [ 1.325186] type=2000 audit(122787471
> [ 1.329426] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.331763] VFS: Disk quotas dquot_6.5.1
> [ 1.331835] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.331918] msgmni has been set to 7791
> [ 1.332028] io scheduler noop registered
> [ 1.332030] io scheduler anticipatory registered
> [ 1.332031] io scheduler deadline registered
> [ 1.332137] io scheduler cfq registered (default)
> [ 1.400201] pci 0000:00:07.0: Enabling HT MSI Mapping
> [ 1.400229] pci 0000:00:08.0: Enabling HT MSI Mapping
> [ 1.400258] pci 0000:00:09.0: Enabling HT MSI Mapping
> [ 1.400285] pci 0000:00:0b.0: Enabling HT MSI Mapping
> [ 1.400339] pci 0000:00:10.0: Enabling HT MSI Mapping
> [ 1.400404] pci 0000:00:12.0: Enabling HT MSI Mapping
> [ 1.400448] pci 0000:02:00.0: Boot video device
> [ 1.400578] pcieport-driver 0000:00:10.0: setting latency timer to 64
> [ 1.400743] pcieport-driver 0000:00:10.0: found MSI capability
> [ 1.400856] pci_express 0000:00:
> [ 1.401098] pcieport-driver 0000:00:12.0: setting latency timer to 64
> [ 1.401262] pcieport-driver 0000:00:12.0: found MSI capability
> [ 1.401371] pci_express 0000:00:
> [ 1.432959] hpet_resources: 0xfed00000 is busy
> [ 1.433051] Linux agpgart interface v0.103
> [ 1.433055] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> [ 1.433183] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.433755] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.435232] brd: module loaded
> [ 1.435290] input: Macintosh mouse button emulation as
> /devices/
> [ 1.435389] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 1.435390] PNP: PS/2 appears to have AUX port disabled, if this is
> incorrect please boot with i8042.nopnp
> [ 1.435511] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.448192] mice: PS/2 mouse device common for all mice
> [ 1.448300] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
> [ 1.448356] rtc0: alarms up to one year, y3k, hpet irqs
> [ 1.448390] cpuidle: using governor ladder
> [ 1.448392] cpuidle: using governor menu
> [ 1.448690] TCP cubic registered
> [ 1.448878] registered taskstats version 1
> [ 1.448984] Magic number: 0:678:330
> [ 1.449035] tty tty51: hash matches
> [ 1.449124] rtc_cmos 00:08: setting system clock to 2008-11-28 12:18:34
> UTC (1227874714)
> [ 1.449126] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.449127] EDD information not available.
> [ 1.449167] Freeing unused kernel memory: 536k freed
> [ 1.449359] Write protecting the kernel read-only data: 4348k
> [ 1.477960] input: AT Translated Set 2 keyboard as
> /devices/
> [ 1.550359] fuse init (API version 7.9)
> [ 1.565173] processor ACPI0007:00: registered as cooling_device0
> [ 1.565229] processor ACPI0007:01: registered as cooling_device1
> [ 1.565284] processor ACPI0007:02: registered as cooling_device2
> [ 1.565340] processor ACPI0007:03: registered as cooling_device3
> [ 1.763178] usbcore: registered new interface driver usbfs
> [ 1.763196] usbcore: registered new interface driver hub
> [ 1.763225] usbcore: registered new device driver usb
> [ 1.768998] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
> [ 1.769009] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23
> (level, low) -> IRQ 23
> [ 1.769019] ehci_hcd 0000:00:02.1: setting latency timer to 64
> [ 1.769021] ehci_hcd 0000:00:02.1: EHCI Host Controller
> [ 1.769057] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
> number 1
> [ 1.769087] ehci_hcd 0000:00:02.1: debug port 1
> [ 1.769091] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
> [ 1.769107] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfce7fc00
> [ 1.770466] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
> (OHCI) Driver
> [ 1.771566] No dock devices found.
> [ 1.780046] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 1.780165] usb usb1: configuration #1 chosen from 1 choice
> [ 1.780187] hub 1-0:1.0: USB hub found
> [ 1.780193] hub 1-0:1.0: 6 ports detected
> [ 1.789776] SCSI subsystem initialized
> [ 1.802507] libata version 3.00 loaded.
> [ 1.988783] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
> [ 1.988795] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22
> (level, low) -> IRQ 22
> [ 1.988807] ehci_hcd 0000:00:04.1: setting latency timer to 64
> [ 1.988810] ehci_hcd 0000:00:04.1: EHCI Host Controller
> [ 1.988830] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
> number 2
> [ 1.988854] ehci_hcd 0000:00:04.1: debug port 1
> [ 1.988857] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
> [ 1.988874] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfce7f800
> [ 2.112556] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 2.112686] usb usb2: configuration #1 chosen from 1 choice
> [ 2.112711] hub 2-0:1.0: USB hub found
> [ 2.112718] hub 2-0:1.0: 6 ports detected
> [ 2.316890] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
> [ 2.316936] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21
> (level, low) -> IRQ 21
> [ 2.316948] ohci_hcd 0000:00:02.0: setting latency timer to 64
> [ 2.316951] ohci_hcd 0000:00:02.0: OHCI Host Controller
> [ 2.316971] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
> number 3
> [ 2.316993] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfce7e000
> [ 2.374188] usb usb3: configuration #1 chosen from 1 choice
> [ 2.374212] hub 3-0:1.0: USB hub found
> [ 2.374235] hub 3-0:1.0: 6 ports detected
> [ 2.428271] usb 2-1: new high speed USB device using ehci_hcd and address
> 2
> [ 2.563271] usb 2-1: configuration #1 chosen from 1 choice
> [ 2.581039] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
> [ 2.581050] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20
> (level, low) -> IRQ 20
> [ 2.581063] ohci_hcd 0000:00:04.0: setting latency timer to 64
> [ 2.581065] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [ 2.581084] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
> number 4
> [ 2.581105] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfce7d000
> [ 2.638265] usb usb4: configuration #1 chosen from 1 choice
> [ 2.638288] hub 4-0:1.0: USB hub found
> [ 2.638295] hub 4-0:1.0: 6 ports detected
> [ 2.792028] usb 3-3: new full speed USB device using ohci_hcd and address
> 2
> [ 2.848430] pata_amd 0000:00:06.0: version 0.3.10
> [ 2.848463] pata_amd 0000:00:06.0: setting latency timer to 64
> [ 2.848537] scsi0 : pata_amd
> [ 2.848612] scsi1 : pata_amd
> [ 2.849858] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq
> 14
> [ 2.849860] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq
> 15
> [ 3.006827] usb 3-3: configuration #1 chosen from 1 choice
> [ 3.116240] ata1.01: NODEV after polling detection
> [ 3.141195] ata1.00: failed to set max address (err_mask=0x1)
> [ 3.141197] ata1.00: device aborted resize (321672960 ->
> 184467440736956
> [ 3.141201] ata1.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
> [ 3.141203] ata1.00: 321672960 sectors, multi 16: LBA48
> [ 3.141208] ata1.00: Drive reports diagnostics failure. This may indicate
> a drive
> [ 3.141209] ata1.00: fault or invalid emulation. Contact drive vendor for
> information.
> [ 3.141214] ata1: nv_mode_filter: 0x7f39f&
> (0xc7000000) ACPI=0x7f01f (15:900:0x11)
> [ 3.156358] ata1.00: configured for UDMA/133
> [ 3.156393] ata2: port disabled. ignoring.
> [ 3.156479] scsi 0:0:0:0: Direct-Access ATA HDT722516DLAT80
> V43O PQ: 0 ANSI: 5
> [ 3.157804] ahci 0000:00:09.0: version 3.0
> [ 3.158332] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
> [ 3.158335] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level,
> low) -> IRQ 23
> [ 3.158408] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
> 0x3f impl IDE mode
> [ 3.158411] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
> [ 3.158414] ahci 0000:00:09.0: setting latency timer to 64
> [ 3.158669] scsi2 : ahci
> [ 3.159632] scsi3 : ahci
> [ 3.160600] scsi4 : ahci
> [ 3.161530] scsi5 : ahci
> [ 3.162473] scsi6 : ahci
> [ 3.163440] scsi7 : ahci
> [ 3.163533] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100
> irq 2301
> [ 3.163535] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180
> irq 2301
> [ 3.163537] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200
> irq 2301
> [ 3.163539] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280
> irq 2301
> [ 3.163541] ata7: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300
> irq 2301
> [ 3.163543] ata8: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380
> irq 2301
> [ 3.184132] usb 4-3: new low speed USB device using ohci_hcd and address
> 2
> [ 3.396197] usb 4-3: configuration #1 chosen from 1 choice
> [ 3.480226] ata3: SATA link down (SStatus 0 SControl 300)
> [ 3.800134] ata4: SATA link down (SStatus 0 SControl 300)
> [ 4.284097] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 4.287483] ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
> [ 4.291552] ata5.00: configured for UDMA/100
> [ 4.608122] ata6: SATA link down (SStatus 0 SControl 300)
> [ 4.928155] ata7: SATA link down (SStatus 0 SControl 300)
> [ 5.248061] ata8: SATA link down (SStatus 0 SControl 300)
> [ 5.251224] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15
> IL00 PQ: 0 ANSI: 5
> [ 5.266057] scsi 0:0:0:0: Attached scsi generic sg0 type 0
> [ 5.266086] scsi 4:0:0:0: Attached scsi generic sg1 type 5
> [ 5.280674] usbcore: registered new interface driver hiddev
> [ 5.285208] Driver 'sd' needs updating - please use bus_type methods
> [ 5.285300] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
> MB)
> [ 5.285312] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.285314] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.285332] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 5.285390] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697
> MB)
> [ 5.285401] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.285402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.285421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 5.285423] sda:<6>input: USB Mouse as
> /devices/
> [ 5.287261] Driver 'sr' needs updating - please use bus_type methods
> [ 5.299919] sda1 sda2 <<6>input,hidraw0: USB HID v1.10 Mouse [USB Mouse]
> on usb-0000:00:04.0-3
> [ 5.301193] usbcore: registered new interface driver usbhid
> [ 5.301197] usbhid: v2.6:USB HID core driver
> [ 5.311068] sda5 sda6 sda7 >
> [ 5.342127] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 5.563175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
> cdda tray
> [ 5.563179] Uniform CD-ROM driver Revision: 3.20
> [ 5.563257] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 6.270711] PM: Starting manual resume from disk
> [ 6.270714] PM: Resume from partition 8:7
> [ 6.270715] PM: Checking hibernation image.
> [ 6.270849] PM: Resume from disk failed.
> [ 6.315203] kjournald starting. Commit interval 5 seconds
> [ 6.315220] EXT3-fs: mounted filesystem with ordered data mode.
> [ 11.374470] udevd version 124 started
> [ 11.620965] input: Power Button (FF) as
> /devices/
> [ 11.644527] ACPI: Power Button (FF) [PWRF]
> [ 11.644629] input: Power Button (CM) as
> /devices/
> [ 11.676522] ACPI: Power Button (CM) [PWRB]
> [ 11.906687] parport_pc 00:05: reported by Plug and Play ACPI
> [ 11.906733] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [ 11.908094] ACPI: WMI: Mapper loaded
> [ 12.063550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 12.066183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 12.192467] input: PC Speaker as /devices/
> [ 12.229373] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2
> vid 0x03F0 pid 0x2C17
> [ 12.229397] usbcore: registered new interface driver usblp
> [ 12.547199] nvidia: module license 'NVIDIA' taints kernel.
> [ 12.817784] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
> [ 12.817790] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 22
> (level, low) -> IRQ 22
> [ 12.817795] nvidia 0000:02:00.0: setting latency timer to 64
> [ 12.817944] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed
> Oct 1 14:43:46 PDT 2008
> [ 13.021023] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
> [ 13.021034] rt61pci 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17
> (level, low) -> IRQ 17
> [ 13.028428] phy0: Selected rate control algorithm 'pid'
> [ 13.119014] Registered led device: rt61pci-phy0:radio
> [ 13.119028] Registered led device: rt61pci-phy0:assoc
> [ 13.540411] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
> [ 13.540973] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
> [ 13.540977] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21
> (level, low) -> IRQ 21
> [ 13.540991] HDA Intel 0000:00:07.0: setting latency timer to 64
> [ 13.568525] hda-intel: no codecs initialized
> [ 13.568559] HDA Intel 0000:00:07.0: PCI INT A disabled
> [ 14.367812] lp0: using parport0 (interrupt-driven).
> [ 14.496360] Adding 1060248k swap on /dev/sda7. Priority:-1 extents:1
> across:1060248k
> [ 15.042956] EXT3 FS on sda6, internal journal
> [ 16.011305] type=1505 audit(122788192
> name="/
> [ 16.131860] type=1505 audit(122788192
> name="/
> [ 16.132019] type=1505 audit(122788192
> name="/
> [ 16.256686] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 16.999061] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor
> processors (4 cpu cores) (version 2.20.00)
> [ 16.999474] powernow-k8: 0 : pstate 0 (2600 MHz)
> [ 16.999477] powernow-k8: 1 : pstate 1 (1300 MHz)
> [ 17.617814] warning: `avahi-daemon' uses 32-bit capabilities (legacy
> support in use)
> [ 17.804204] ppdev: user-space parallel port driver
> [ 21.195105] Bluetooth: Core ver 2.13
> [ 21.196157] NET: Registered protocol family 31
> [ 21.196164] Bluetooth: HCI device and connection manager initialized
> [ 21.196168] Bluetooth: HCI socket layer initialized
> [ 21.214325] Bluetooth: L2CAP ver 2.11
> [ 21.214333] Bluetooth: L2CAP socket layer initialized
> [ 21.313246] Bluetooth: SCO (Voice Link) ver 0.6
> [ 21.313253] Bluetooth: SCO socket layer initialized
> [ 21.397209] Bluetooth: RFCOMM socket layer initialized
> [ 21.397236] Bluetooth: RFCOMM TTY layer initialized
> [ 21.397239] Bluetooth: RFCOMM ver 1.10
> [ 21.424374] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 21.424385] Bluetooth: BNEP filters: protocol multicast
> [ 21.511044] Bridge firewalling registered
> [ 21.511274] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> [ 25.582627] firmware: requesting rt2561s.bin
> [ 25.894496] NET: Registered protocol family 17
> [ 26.540581] wlan0: authenticate with AP 00:e0:4c:f6:ed:c5
> [ 26.542146] wlan0: authenticated
> [ 26.542157] wlan0: associate with AP 00:e0:4c:f6:ed:c5
> [ 26.549943] wlan0: RX AssocResp from 00:e0:4c:f6:ed:c5 (capab=0x401
> status=0 aid=2)
> [ 26.549951] wlan0: associated
> [ 26.550151] wlan0: disassociating by local choice (reason=3)
> [ 103.159613] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 103.159624] usb 4-3: USB disconnect, address 2
> [ 103.520200] usb 4-3: new low speed USB device using ohci_hcd and address
> 3
> [ 103.729550] usb 4-3: configuration #1 chosen from 1 choice
> [ 103.739774] input: USB Mouse as
> /devices/
> [ 103.781657] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 109.495767] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 109.495779] usb 4-3: USB disconnect, address 3
> [ 109.852348] usb 4-3: new low speed USB device using ohci_hcd and address
> 4
> [ 110.061843] usb 4-3: configuration #1 chosen from 1 choice
> [ 110.071982] input: USB Mouse as
> /devices/
> [ 110.113708] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 119.057571] ppdev0: registered pardevice
> [ 119.104434] ppdev0: unregistered pardevice
> [ 119.114784] ppdev0: registered pardevice
> [ 119.160417] ppdev0: unregistered pardevice
> [ 119.507498] ppdev0: registered pardevice
> [ 119.552362] ppdev0: unregistered pardevice
> [ 158.112988] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 158.113000] usb 4-3: USB disconnect, address 4
> [ 158.488401] usb 4-3: new low speed USB device using ohci_hcd and address
> 5
> [ 158.698117] usb 4-3: configuration #1 chosen from 1 choice
> [ 158.708419] input: USB Mouse as
> /devices/
> [ 158.749821] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 172.065335] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 172.065347] usb 4-3: USB disconnect, address 5
> [ 172.440206] usb 4-3: new low speed USB device using ohci_hcd and address
> 6
> [ 172.649557] usb 4-3: configuration #1 chosen from 1 choice
> [ 172.659802] input: USB Mouse as
> /devices/
> [ 172.703424] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 176.585447] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 176.585461] usb 4-3: USB disconnect, address 6
> [ 176.952281] usb 4-3: new low speed USB device using ohci_hcd and address
> 7
> [ 177.161690] usb 4-3: configuration #1 chosen from 1 choice
> [ 177.171756] input: USB Mouse as
> /devices/
> [ 177.229687] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 219.618985] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 219.618997] usb 4-3: USB disconnect, address 7
> [ 219.992130] usb 4-3: new low speed USB device using ohci_hcd and address
> 8
> [ 220.202237] usb 4-3: configuration #1 chosen from 1 choice
> [ 220.212579] input: USB Mouse as
> /devices/
> [ 220.253686] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 239.155410] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 239.155422] usb 4-3: USB disconnect, address 8
> [ 239.520116] usb 4-3: new low speed USB device using ohci_hcd and address
> 9
> [ 239.730459] usb 4-3: configuration #1 chosen from 1 choice
> [ 239.740596] input: USB Mouse as
> /devices/
> [ 239.783139] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 270.404599] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 270.404611] usb 4-3: USB disconnect, address 9
> [ 270.768090] usb 4-3: new low speed USB device using ohci_hcd and address
> 10
> [ 270.978511] usb 4-3: configuration #1 chosen from 1 choice
> [ 270.988542] input: USB Mouse as
> /devices/
> [ 271.031112] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 324.070190] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 324.070201] usb 4-3: USB disconnect, address 10
> [ 324.437532] usb 4-3: new low speed USB device using ohci_hcd and address
> 11
> [ 324.648027] usb 4-3: configuration #1 chosen from 1 choice
> [ 324.657172] input: USB Mouse as
> /devices/
> [ 324.705725] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 327.358049] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 327.358061] usb 4-3: USB disconnect, address 11
> [ 327.728390] usb 4-3: new low speed USB device using ohci_hcd and address
> 12
> [ 327.939099] usb 4-3: configuration #1 chosen from 1 choice
> [ 327.949229] input: USB Mouse as
> /devices/
> [ 327.997683] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
> [ 335.670559] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
> [ 335.670571] usb 4-3: USB disconnect, address 12
> [ 336.036238] usb 4-3: new low speed USB device using ohci_hcd and address
> 13
> [ 336.246720] usb 4-3: configuration #1 chosen from 1 choice
> [ 336.256732] input: USB Mouse as
> /devices/
> [ 336.297680] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
> usb-0000:00:04.0-3
>
> --
> You received this question notification because you are an answer
> contact for Ubuntu.
>
|
Revision history for this message
|
#14 |
Pedro, no veo nada mal en tu dmesg, salvo el error del grabador Sony; luego de desconectar el grabador, no se te ha vuelto a congelar la máquina?
Por ahí leí que en algunos chipsets el tener activado el modo AHCI para los SATA te puede causar problemas, pero pasándole el parámetro "pci=nomsi" al kernel al inicio funciona bien, podés probar eso. Las instrucciones de cómo pasarle parámetros al kernel las podés encontrar aquí:
https:/
Ese grabador Sony tiene el firmware QYB1, y hay una versión más reciente, la QYB2, la podés encontrar aquí:
http://
Es posible que el problema se solucione con un firmware más reciente.
|
Revision history for this message
|
#15 |
Guillermo / Ivancete:
les agradezco el aporte. Pude solucionar los problemas con el HDD y las "frizadas" que se pegaba Ubuntu.
Revisé según las indicaciones de Ivancete, la conección del cable IDE.
Además, voy a actualizar el Firmware de la regrabadora Sony (aunque en poco más la jubilo y reemplazo por una SATA).
me quedan dos problemitas más (drivers de nvidia y sonido onboard n reconocido), pero los pongo en otro post.
saludos..
|
Revision history for this message
|
#16 |
Guillermo / Ivancete:
les agradezco el aporte. Pude solucionar los problemas con el HDD y las
"frizadas" que se pegaba Ubuntu.
Revisé según las indicaciones de Ivancete, la conección del cable IDE.
Además, voy a actualizar el Firmware de la regrabadora Sony (aunque en poco
más la jubilo y reemplazo por una SATA).
me quedan dos problemitas más (drivers de nvidia y sonido onboard n
reconocido), pero los pongo en otro post.
saludos..
El 29 de noviembre de 2008 3:50, Guillermo Belli <
<email address hidden>> escribió:
> Your question #51844 on Ubuntu changed:
> https:/
>
> Guillermo Belli proposed the following answer:
> Pedro, no veo nada mal en tu dmesg, salvo el error del grabador Sony;
> luego de desconectar el grabador, no se te ha vuelto a congelar la
> máquina?
>
> Por ahí leí que en algunos chipsets el tener activado el modo AHCI para
> los SATA te puede causar problemas, pero pasándole el parámetro
> "pci=nomsi" al kernel al inicio funciona bien, podés probar eso. Las
> instrucciones de cómo pasarle parámetros al kernel las podés encontrar
> aquí:
>
> https:/
>
> Ese grabador Sony tiene el firmware QYB1, y hay una versión más
> reciente, la QYB2, la podés encontrar aquí:
>
> http://
>
> Es posible que el problema se solucione con un firmware más reciente.
>
> --
> If this answers your question, please go to the following page to let us
> know that it is solved:
> https:/
>
> If you still need help, you can reply to this email or go to the
> following page to enter your feedback:
> https:/
>
> You received this question notification because you are a direct
> subscriber of the question.
>
|
Revision history for this message
|
#17 |
Me alegro que te haya servido nuestros aportes
si solucionaste el problema marcala como solved.
Saludos
El día 29 de noviembre de 2008 13:48, Pedro
<email address hidden> escribió:
> Question #51844 on Ubuntu changed:
> https:/
>
> Pedro posted a new comment:
> Guillermo / Ivancete:
>
> les agradezco el aporte. Pude solucionar los problemas con el HDD y las
> "frizadas" que se pegaba Ubuntu.
> Revisé según las indicaciones de Ivancete, la conección del cable IDE.
> Además, voy a actualizar el Firmware de la regrabadora Sony (aunque en poco
> más la jubilo y reemplazo por una SATA).
>
> me quedan dos problemitas más (drivers de nvidia y sonido onboard n
> reconocido), pero los pongo en otro post.
>
> saludos..
>
> El 29 de noviembre de 2008 3:50, Guillermo Belli <
> <email address hidden>> escribió:
>
>> Your question #51844 on Ubuntu changed:
>> https:/
>>
>> Guillermo Belli proposed the following answer:
>> Pedro, no veo nada mal en tu dmesg, salvo el error del grabador Sony;
>> luego de desconectar el grabador, no se te ha vuelto a congelar la
>> máquina?
>>
>> Por ahí leí que en algunos chipsets el tener activado el modo AHCI para
>> los SATA te puede causar problemas, pero pasándole el parámetro
>> "pci=nomsi" al kernel al inicio funciona bien, podés probar eso. Las
>> instrucciones de cómo pasarle parámetros al kernel las podés encontrar
>> aquí:
>>
>> https:/
>>
>> Ese grabador Sony tiene el firmware QYB1, y hay una versión más
>> reciente, la QYB2, la podés encontrar aquí:
>>
>> http://
>>
>> Es posible que el problema se solucione con un firmware más reciente.
>>
>> --
>> If this answers your question, please go to the following page to let us
>> know that it is solved:
>> https:/
>>
>> If you still need help, you can reply to this email or go to the
>> following page to enter your feedback:
>> https:/
>>
>> You received this question notification because you are a direct
>> subscriber of the question.
>>
>
> --
> You received this question notification because you are an answer
> contact for Ubuntu.
>
