No puedo montar la unidad CDRW

Realice algunas modificaciones pero la unidad de CDR solo se monta al arrancar el equipo. Al extraer el CD y colocar otro, resulta imposible volver a montar la unidad. Para lograrlo debo apagar el equipo con el CD adentro y al arrancar nuevamente aparece montado.

Realice la recarga de ubuntu 7.1 pero todo sigue igual.

Muéstranos la salida del comando "dmesg" (sin las comillas) tras extraer el CD e intentar montar otro CD. Copia y pega la salida entera.

El comando dmesg está absolutamente vacio

El comando dmesg no debería estar vacío. En fin, muéstrame la salida de:
cat /var/log/messages

Pues la salida de cat/var/log/messages tambien esta absolutamente vacia

muestranos el contenido de tu archivo /etc/fstab

On Fri, Apr 4, 2008 at 2:45 PM, Esteban Favero <
<email address hidden>> wrote:

> Question #28402 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/28402
>
> Status: Answered => Open
>
> Esteban Favero is still having a problem:
> Pues la salida de cat/var/log/messages tambien esta absolutamente vacia
>
> --
> You received this question notification because you are a member of
> Ubuntu-co-answers, which is an answer contact for Ubuntu.
>

--
Yo No Podría Sentir Temor Mas Que De Mi Mismo!

Arranque el equipo y monto un CD que tenia puesto.
Aproveche y liste dmesg, es el que sigue:

[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002bee0000 (usable)
[ 0.000000] BIOS-e820: 000000002bee0000 - 000000002bee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002bee3000 - 000000002bef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002bef0000 - 000000002bf00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 702MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f3620
[ 0.000000] Entering add_active_range(0, 0, 179936) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 179936
[ 0.000000] HighMem 179936 -> 179936
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 179936
[ 0.000000] On node 0 totalpages: 179936
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1373 pages used for memmap
[ 0.000000] Normal zone: 174467 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7720 checksum 0
[ 0.000000] ACPI: RSDP 000F7720, 0014 (r0 VIAK8M)
[ 0.000000] ACPI: RSDT 2BEE3040, 002C (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2BEE30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2BEE3180, 525B (r1 VIAK8M AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 2BEE0000, 0040
[ 0.000000] ACPI: APIC 2BEE8440, 005A (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2bf00000:d2d00000)
[ 0.000000] Built 1 zonelists. Total pages: 178531
[ 0.000000] Kernel command line: root=UUID=ebfa1642-8e0f-4598-be3d-9a05ca5ce5b9 ro single
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1599.940 MHz processor.
[ 16.619031] Console: colour VGA+ 80x25
[ 16.622208] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.623318] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.639326] Memory: 701324k/719744k available (2015k kernel code, 17896k reserved, 915k data, 364k init, 0k highmem)
[ 16.639410] virtual kernel memory layout:
[ 16.639411] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 16.639413] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.639414] vmalloc : 0xec800000 - 0xff7fe000 ( 303 MB)
[ 16.639416] lowmem : 0xc0000000 - 0xebee0000 ( 702 MB)
[ 16.639418] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 16.639419] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 16.639421] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 16.639868] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.640017] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.720109] Calibrating delay using timer specific routine.. 3203.65 BogoMIPS (lpj=6407314)
[ 16.720244] Security Framework v1.0.0 initialized
[ 16.720306] SELinux: Disabled at boot.
[ 16.720375] Mount-cache hash table entries: 512
[ 16.720553] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 16.720563] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.720623] CPU: L2 Cache: 128K (64 bytes/line)
[ 16.720681] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 16.720691] Compat vDSO mapped to ffffe000.
[ 16.720757] Checking 'hlt' instruction... OK.
[ 16.736315] SMP alternatives: switching to UP code
[ 16.736703] Freeing SMP alternatives: 11k freed
[ 16.737152] Early unpacking initramfs... done
[ 17.121378] ACPI: Core revision 20070126
[ 17.121523] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.124689] CPU0: AMD Sempron(tm) Processor 2600+ stepping 02
[ 17.124853] Total of 1 processors activated (3203.65 BogoMIPS).
[ 17.125414] ENABLING IO-APIC IRQs
[ 17.125792] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 17.272130] Brought up 1 CPUs
[ 17.272329] Booting paravirtualized kernel on bare hardware
[ 17.272482] Time: 22:53:07 Date: 03/04/108
[ 17.272563] NET: Registered protocol family 16
[ 17.272723] EISA bus registered
[ 17.272795] ACPI: bus type pci registered
[ 17.280507] PCI: PCI BIOS revision 2.10 entry at 0xf9ff0, last bus=1
[ 17.280566] PCI: Using configuration type 1
[ 17.280622] Setting up standard PCI resources
[ 17.284835] ACPI: EC: Look up EC in DSDT
[ 17.290404] ACPI: Interpreter enabled
[ 17.290467] ACPI: (supports S0 S1 S4 S5)
[ 17.290738] ACPI: Using IOAPIC for interrupt routing
[ 17.298329] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.298394] PCI: Probing PCI hardware (bus 00)
[ 17.299311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.359365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
[ 17.359991] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 17.360583] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
[ 17.361145] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.361793] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.362435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.363080] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.363723] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.364413] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 17.364743] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 17.365073] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 17.365426] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 17.365731] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.365805] pnp: PnP ACPI init
[ 17.365873] ACPI: bus type pnp registered
[ 17.370804] pnp: PnP ACPI: found 15 devices
[ 17.370866] ACPI: ACPI bus type pnp unregistered
[ 17.370925] PnPBIOS: Disabled by ACPI PNP
[ 17.371036] PCI: Using ACPI for IRQ routing
[ 17.371094] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.401311] NET: Registered protocol family 8
[ 17.401367] NET: Registered protocol family 20
[ 17.401517] pnp: 00:00: iomem range 0xcf400-0xcffff has been reserved
[ 17.401578] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.401638] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.401698] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 17.401764] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
[ 17.401824] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 17.404092] Time: tsc clocksource has been installed.
[ 17.432186] PCI: Bridge: 0000:00:01.0
[ 17.432241] IO window: disabled.
[ 17.432299] MEM window: f4000000-f5ffffff
[ 17.432357] PREFETCH window: f0000000-f3ffffff
[ 17.432428] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.432445] NET: Registered protocol family 2
[ 17.472142] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.472384] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 17.474611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.475390] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.475454] TCP reno registered
[ 17.484231] checking if image is initramfs... it is
[ 17.936088] Switched to high resolution mode on CPU 0
[ 18.239471] Freeing initrd memory: 7591k freed
[ 18.239955] audit: initializing netlink socket (disabled)
[ 18.240038] audit(1207349588.160:1): initialized
[ 18.241885] VFS: Disk quotas dquot_6.5.1
[ 18.242000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.242167] io scheduler noop registered
[ 18.242223] io scheduler anticipatory registered
[ 18.242280] io scheduler deadline registered
[ 18.242353] io scheduler cfq registered (default)
[ 18.242424] PCI: VIA PCI bridge detected. Disabling DAC.
[ 18.242551] Boot video device is 0000:01:00.0
[ 18.242727] isapnp: Scanning for PnP cards...
[ 18.596946] isapnp: No Plug & Play device found
[ 18.649658] Real Time Clock Driver v1.12ac
[ 18.649801] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.649966] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.651249] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.652181] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.652489] input: Macintosh mouse button emulation as /class/input/input0
[ 18.652629] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.653084] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.653145] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.653357] mice: PS/2 mouse device common for all mice
[ 18.653530] EISA: Probing bus 0 at eisa.0
[ 18.653606] Cannot allocate resource for EISA slot 4
[ 18.653663] Cannot allocate resource for EISA slot 5
[ 18.653732] EISA: Detected 0 cards.
[ 18.653972] TCP cubic registered
[ 18.654044] NET: Registered protocol family 1
[ 18.654125] Using IPI No-Shortcut mode
[ 18.654384] Magic number: 4:959:905
[ 18.654508] hash matches device ptyz1
[ 18.654987] Freeing unused kernel memory: 364k freed
[ 18.688059] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.895497] AppArmor: AppArmor initialized<5>audit(1207349588.660:2): type=1505 info="AppArmor initialized" pid=1182
[ 18.902667] fuse init (API version 7.8)
[ 18.908223] Failure registering capabilities with primary security module.
[ 18.920664] ACPI: Fan [FAN] (on)
[ 18.927657] ACPI: Thermal Zone [THRM] (35 C)
[ 18.943184] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <email address hidden>
[ 19.697999] SCSI subsystem initialized
[ 19.703280] libata version 2.21 loaded.
[ 19.704732] sata_via 0000:00:0f.0: version 2.2
[ 19.704987] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 19.705056] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 19.705255] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 19.705407] scsi0 : sata_via
[ 19.705519] scsi1 : sata_via
[ 19.705604] ata1: SATA max UDMA/133 cmd 0x0001e100 ctl 0x0001e702 bmdma 0x0001e000 irq 16
[ 19.705676] ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e902 bmdma 0x0001e008 irq 16
[ 19.741203] usbcore: registered new interface driver usbfs
[ 19.741288] usbcore: registered new interface driver hub
[ 19.744172] usbcore: registered new device driver usb
[ 19.745224] USB Universal Host Controller Interface driver v3.0
[ 19.853581] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 19.853650] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 19.907864] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 19.997005] Floppy drive(s): fd0 is 1.44M
[ 20.053259] FDC 0 is a post-1991 82077
[ 20.119834] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 20.136024] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.136090] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.137162] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 20.137244] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 20.137404] VP_IDE: chipset revision 6
[ 20.137460] VP_IDE: not 100% native mode: will probe irqs later
[ 20.137528] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 20.137603] ide0: BM-DMA at 0xe200-0xe207, BIOS settings: hda:DMA, hdb:DMA
[ 20.137762] ide1: BM-DMA at 0xe208-0xe20f, BIOS settings: hdc:pio, hdd:pio
[ 20.137916] Probing IDE interface ide0...
[ 20.551880] hda: WDC WD800BB-00JHC0, ATA DISK drive
[ 20.999845] hdb: HL-DT-ST GCE-8527B, ATAPI CD/DVD-ROM drive
[ 21.104778] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.122501] Probing IDE interface ide1...
[ 21.688088] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 21.688159] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 21.688326] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.688880] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 21.688990] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e300
[ 21.689583] usb usb1: configuration #1 chosen from 1 choice
[ 21.689837] hub 1-0:1.0: USB hub found
[ 21.689903] hub 1-0:1.0: 2 ports detected
[ 21.697907] hda: max request size: 128KiB
[ 21.709594] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[ 21.709917] hda: cache flushes supported
[ 21.710017] hda: hda1 hda2 < hda5 >
[ 21.779295] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
[ 21.779644] Uniform CD-ROM driver Revision: 3.20
[ 21.792291] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 21.792457] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.792742] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 21.792838] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e400
[ 21.793398] usb usb2: configuration #1 chosen from 1 choice
[ 21.793751] hub 2-0:1.0: USB hub found
[ 21.793818] hub 2-0:1.0: 2 ports detected
[ 21.895805] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 21.895972] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.896057] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 21.896149] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e500
[ 21.896304] usb usb3: configuration #1 chosen from 1 choice
[ 21.896388] hub 3-0:1.0: USB hub found
[ 21.896449] hub 3-0:1.0: 2 ports detected
[ 22.000233] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 22.000399] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 22.000691] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 22.000789] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e600
[ 22.001385] usb usb4: configuration #1 chosen from 1 choice
[ 22.001682] hub 4-0:1.0: USB hub found
[ 22.001748] hub 4-0:1.0: 2 ports detected
[ 22.104414] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 22.104581] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 22.104943] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 22.105058] ehci_hcd 0000:00:10.4: irq 17, io mem 0xf6000000
[ 22.105121] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.105761] usb usb5: configuration #1 chosen from 1 choice
[ 22.106079] hub 5-0:1.0: USB hub found
[ 22.106144] hub 5-0:1.0: 8 ports detected
[ 22.208128] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 22.208199] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 22.212381] eth0: VIA Rhine II at 0x1dc00, 00:e0:4c:eb:85:3e, IRQ 18.
[ 22.213393] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 22.691452] Attempting manual resume
[ 22.691510] swsusp: Resume From Partition 3:5
[ 22.691512] PM: Checking swsusp image.
[ 22.691700] PM: Resume from disk failed.
[ 22.722032] kjournald starting. Commit interval 5 seconds
[ 22.722106] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.395550] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 23.584537] usb 2-2: configuration #1 chosen from 1 choice
[ 31.561848] Linux agpgart interface v0.102 (c) Dave Jones
[ 31.569468] agpgart: Detected AGP bridge 0
[ 31.574546] agpgart: AGP aperture is 128M @ 0xe8000000
[ 31.639983] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.664617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.402082] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
[ 32.402192] usbcore: registered new interface driver usblp
[ 32.402251] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 33.055286] input: PC Speaker as /class/input/input2
[ 33.420260] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 33.423319] parport_pc 00:0a: reported by Plug and Play ACPI
[ 33.423463] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.432283] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 33.432352] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 33.434607] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 33.943692] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 33.943985] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 35.525537] lp0: using parport0 (interrupt-driven).
[ 35.573323] Adding 2072344k swap on /dev/hda5. Priority:-1 extents:1 across:2072344k
[ 35.863699] EXT3 FS on hda1, internal journal
[ 41.213802] No dock devices found.
[ 41.314673] input: Power Button (FF) as /class/input/input4
[ 41.319795] ACPI: Power Button (FF) [PWRF]
[ 41.358790] input: Power Button (CM) as /class/input/input5
[ 41.363878] ACPI: Power Button (CM) [PWRB]
[ 41.397851] input: Sleep Button (CM) as /class/input/input6
[ 41.398162] ACPI: Sleep Button (CM) [SLPB]
[ 41.773865] powernow-k8: Power state transitions not supported
[ 41.813845] ACPI Exception (processor_perflib-0234): AE_NOT_FOUND, Evaluating _PSS [20070126]
[ 43.167357] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 43.362927] ppdev: user-space parallel port driver
[ 45.571697] audit(1207349615.999:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5055 profile="/usr/sbin/cupsd"
[ 45.783437] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 45.783443] apm: overridden by ACPI.
[ 46.568785] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 46.743519] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 46.769453] NFSD: starting 90-second grace period
[ 47.270677] Failure registering capabilities with primary security module.
[ 47.499952] Bluetooth: Core ver 2.11
[ 47.500075] NET: Registered protocol family 31
[ 47.500078] Bluetooth: HCI device and connection manager initialized
[ 47.500082] Bluetooth: HCI socket layer initialized
[ 47.519445] Bluetooth: L2CAP ver 2.8
[ 47.519450] Bluetooth: L2CAP socket layer initialized
[ 47.636465] Bluetooth: RFCOMM socket layer initialized
[ 47.636569] Bluetooth: RFCOMM TTY layer initialized
[ 47.636572] Bluetooth: RFCOMM ver 1.8
[ 49.935844] [drm] Initialized drm 1.1.0 20060810
[ 49.977088] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 49.977361] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 49.980327] [drm] Initialized via 2.11.1 20070202 on minor 1
[ 50.171204] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 50.171319] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
[ 50.171412] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 50.171556] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 50.685486] irq 20: nobody cared (try booting with the "irqpoll" option)
[ 50.685525] [<c015b5b4>] __report_bad_irq+0x24/0x80
[ 50.685554] [<c015b872>] note_interrupt+0x262/0x2a0
[ 50.685591] [<c015aad0>] handle_IRQ_event+0x30/0x60
[ 50.685613] [<c015c25b>] handle_fasteoi_irq+0xbb/0xf0
[ 50.685635] [<c0106b1b>] do_IRQ+0x3b/0x70
[ 50.685644] [<c0106b20>] do_IRQ+0x40/0x70
[ 50.685669] [<c0105223>] common_interrupt+0x23/0x30
[ 50.685724] [<ec95bd14>] ide_outb+0x4/0x10 [ide_core]
[ 50.685756] [<ec918b02>] ide_do_rw_disk+0x392/0x500 [ide_disk]
[ 50.685825] [<ec9596e6>] ide_do_request+0x546/0xa00 [ide_core]
[ 50.685888] [<c02f410d>] _spin_unlock_irqrestore+0xd/0x20
[ 50.685905] [<ec9590b3>] ide_end_request+0x73/0x110 [ide_core]
[ 50.685943] [<ec9618fd>] ide_dma_intr+0x7d/0xc0 [ide_core]
[ 50.685986] [<ec959ec7>] ide_intr+0x207/0x210 [ide_core]
[ 50.686012] [<c013eeb6>] ktime_get_ts+0x16/0x50
[ 50.686027] [<ec961880>] ide_dma_intr+0x0/0xc0 [ide_core]
[ 50.686058] [<c015aad0>] handle_IRQ_event+0x30/0x60
[ 50.686078] [<c015c336>] handle_edge_irq+0xa6/0x120
[ 50.686098] [<c0106b1b>] do_IRQ+0x3b/0x70
[ 50.686114] [<c0102e00>] default_idle+0x0/0x60
[ 50.686130] [<c0105223>] common_interrupt+0x23/0x30
[ 50.686134] [<c0102e00>] default_idle+0x0/0x60
[ 50.686180] [<c011dba2>] native_safe_halt+0x2/0x10
[ 50.686193] [<c0102e3c>] default_idle+0x3c/0x60
[ 50.686196] [<c0102413>] cpu_idle+0x53/0xe0
[ 50.686220] [<c03e3a85>] start_kernel+0x325/0x3b0
[ 50.686231] [<c03e31f0>] unknown_bootoption+0x0/0x260
[ 50.686278] =======================
[ 50.686280] handlers:
[ 50.686282] [<ecd5e480>] (via_driver_irq_handler+0x0/0x1d0 [via])
[ 50.686291] Disabling IRQ #20
[ 52.047184] NET: Registered protocol family 17
[ 69.493851] cdrom: hdb: mrw address space DMA selected
[ 72.386309] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 72.418796] ISO 9660 Extensions: RRIP_1991A

Esta es despues de desmontar el CD

favero@favero-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002bee0000 (usable)
[ 0.000000] BIOS-e820: 000000002bee0000 - 000000002bee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002bee3000 - 000000002bef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002bef0000 - 000000002bf00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 702MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f3620
[ 0.000000] Entering add_active_range(0, 0, 179936) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 179936
[ 0.000000] HighMem 179936 -> 179936
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 179936
[ 0.000000] On node 0 totalpages: 179936
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1373 pages used for memmap
[ 0.000000] Normal zone: 174467 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7720 checksum 0
[ 0.000000] ACPI: RSDP 000F7720, 0014 (r0 VIAK8M)
[ 0.000000] ACPI: RSDT 2BEE3040, 002C (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2BEE30C0, 0074 (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2BEE3180, 525B (r1 VIAK8M AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 2BEE0000, 0040
[ 0.000000] ACPI: APIC 2BEE8440, 005A (r1 VIAK8M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2bf00000:d2d00000)
[ 0.000000] Built 1 zonelists. Total pages: 178531
[ 0.000000] Kernel command line: root=UUID=ebfa1642-8e0f-4598-be3d-9a05ca5ce5b9 ro single
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1599.940 MHz processor.
[ 16.619031] Console: colour VGA+ 80x25
[ 16.622208] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.623318] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.639326] Memory: 701324k/719744k available (2015k kernel code, 17896k reserved, 915k data, 364k init, 0k highmem)
[ 16.639410] virtual kernel memory layout:
[ 16.639411] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 16.639413] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.639414] vmalloc : 0xec800000 - 0xff7fe000 ( 303 MB)
[ 16.639416] lowmem : 0xc0000000 - 0xebee0000 ( 702 MB)
[ 16.639418] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 16.639419] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 16.639421] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 16.639868] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.640017] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.720109] Calibrating delay using timer specific routine.. 3203.65 BogoMIPS (lpj=6407314)
[ 16.720244] Security Framework v1.0.0 initialized
[ 16.720306] SELinux: Disabled at boot.
[ 16.720375] Mount-cache hash table entries: 512
[ 16.720553] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 16.720563] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.720623] CPU: L2 Cache: 128K (64 bytes/line)
[ 16.720681] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 16.720691] Compat vDSO mapped to ffffe000.
[ 16.720757] Checking 'hlt' instruction... OK.
[ 16.736315] SMP alternatives: switching to UP code
[ 16.736703] Freeing SMP alternatives: 11k freed
[ 16.737152] Early unpacking initramfs... done
[ 17.121378] ACPI: Core revision 20070126
[ 17.121523] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.124689] CPU0: AMD Sempron(tm) Processor 2600+ stepping 02
[ 17.124853] Total of 1 processors activated (3203.65 BogoMIPS).
[ 17.125414] ENABLING IO-APIC IRQs
[ 17.125792] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 17.272130] Brought up 1 CPUs
[ 17.272329] Booting paravirtualized kernel on bare hardware
[ 17.272482] Time: 22:53:07 Date: 03/04/108
[ 17.272563] NET: Registered protocol family 16
[ 17.272723] EISA bus registered
[ 17.272795] ACPI: bus type pci registered
[ 17.280507] PCI: PCI BIOS revision 2.10 entry at 0xf9ff0, last bus=1
[ 17.280566] PCI: Using configuration type 1
[ 17.280622] Setting up standard PCI resources
[ 17.284835] ACPI: EC: Look up EC in DSDT
[ 17.290404] ACPI: Interpreter enabled
[ 17.290467] ACPI: (supports S0 S1 S4 S5)
[ 17.290738] ACPI: Using IOAPIC for interrupt routing
[ 17.298329] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.298394] PCI: Probing PCI hardware (bus 00)
[ 17.299311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.359365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
[ 17.359991] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 17.360583] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
[ 17.361145] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.361793] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.362435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.363080] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.363723] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.364413] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 17.364743] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 17.365073] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 17.365426] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 17.365731] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.365805] pnp: PnP ACPI init
[ 17.365873] ACPI: bus type pnp registered
[ 17.370804] pnp: PnP ACPI: found 15 devices
[ 17.370866] ACPI: ACPI bus type pnp unregistered
[ 17.370925] PnPBIOS: Disabled by ACPI PNP
[ 17.371036] PCI: Using ACPI for IRQ routing
[ 17.371094] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.401311] NET: Registered protocol family 8
[ 17.401367] NET: Registered protocol family 20
[ 17.401517] pnp: 00:00: iomem range 0xcf400-0xcffff has been reserved
[ 17.401578] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.401638] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.401698] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 17.401764] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
[ 17.401824] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 17.404092] Time: tsc clocksource has been installed.
[ 17.432186] PCI: Bridge: 0000:00:01.0
[ 17.432241] IO window: disabled.
[ 17.432299] MEM window: f4000000-f5ffffff
[ 17.432357] PREFETCH window: f0000000-f3ffffff
[ 17.432428] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.432445] NET: Registered protocol family 2
[ 17.472142] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.472384] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 17.474611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.475390] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.475454] TCP reno registered
[ 17.484231] checking if image is initramfs... it is
[ 17.936088] Switched to high resolution mode on CPU 0
[ 18.239471] Freeing initrd memory: 7591k freed
[ 18.239955] audit: initializing netlink socket (disabled)
[ 18.240038] audit(1207349588.160:1): initialized
[ 18.241885] VFS: Disk quotas dquot_6.5.1
[ 18.242000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.242167] io scheduler noop registered
[ 18.242223] io scheduler anticipatory registered
[ 18.242280] io scheduler deadline registered
[ 18.242353] io scheduler cfq registered (default)
[ 18.242424] PCI: VIA PCI bridge detected. Disabling DAC.
[ 18.242551] Boot video device is 0000:01:00.0
[ 18.242727] isapnp: Scanning for PnP cards...
[ 18.596946] isapnp: No Plug & Play device found
[ 18.649658] Real Time Clock Driver v1.12ac
[ 18.649801] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.649966] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.651249] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.652181] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.652489] input: Macintosh mouse button emulation as /class/input/input0
[ 18.652629] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.653084] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.653145] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.653357] mice: PS/2 mouse device common for all mice
[ 18.653530] EISA: Probing bus 0 at eisa.0
[ 18.653606] Cannot allocate resource for EISA slot 4
[ 18.653663] Cannot allocate resource for EISA slot 5
[ 18.653732] EISA: Detected 0 cards.
[ 18.653972] TCP cubic registered
[ 18.654044] NET: Registered protocol family 1
[ 18.654125] Using IPI No-Shortcut mode
[ 18.654384] Magic number: 4:959:905
[ 18.654508] hash matches device ptyz1
[ 18.654987] Freeing unused kernel memory: 364k freed
[ 18.688059] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.895497] AppArmor: AppArmor initialized<5>audit(1207349588.660:2): type=1505 info="AppArmor initialized" pid=1182
[ 18.902667] fuse init (API version 7.8)
[ 18.908223] Failure registering capabilities with primary security module.
[ 18.920664] ACPI: Fan [FAN] (on)
[ 18.927657] ACPI: Thermal Zone [THRM] (35 C)
[ 18.943184] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <email address hidden>
[ 19.697999] SCSI subsystem initialized
[ 19.703280] libata version 2.21 loaded.
[ 19.704732] sata_via 0000:00:0f.0: version 2.2
[ 19.704987] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 19.705056] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 19.705255] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 19.705407] scsi0 : sata_via
[ 19.705519] scsi1 : sata_via
[ 19.705604] ata1: SATA max UDMA/133 cmd 0x0001e100 ctl 0x0001e702 bmdma 0x0001e000 irq 16
[ 19.705676] ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e902 bmdma 0x0001e008 irq 16
[ 19.741203] usbcore: registered new interface driver usbfs
[ 19.741288] usbcore: registered new interface driver hub
[ 19.744172] usbcore: registered new device driver usb
[ 19.745224] USB Universal Host Controller Interface driver v3.0
[ 19.853581] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 19.853650] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 19.907864] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 19.997005] Floppy drive(s): fd0 is 1.44M
[ 20.053259] FDC 0 is a post-1991 82077
[ 20.119834] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 20.136024] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.136090] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.137162] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 20.137244] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 20.137404] VP_IDE: chipset revision 6
[ 20.137460] VP_IDE: not 100% native mode: will probe irqs later
[ 20.137528] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 20.137603] ide0: BM-DMA at 0xe200-0xe207, BIOS settings: hda:DMA, hdb:DMA
[ 20.137762] ide1: BM-DMA at 0xe208-0xe20f, BIOS settings: hdc:pio, hdd:pio
[ 20.137916] Probing IDE interface ide0...
[ 20.551880] hda: WDC WD800BB-00JHC0, ATA DISK drive
[ 20.999845] hdb: HL-DT-ST GCE-8527B, ATAPI CD/DVD-ROM drive
[ 21.104778] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.122501] Probing IDE interface ide1...
[ 21.688088] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 21.688159] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 21.688326] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.688880] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 21.688990] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e300
[ 21.689583] usb usb1: configuration #1 chosen from 1 choice
[ 21.689837] hub 1-0:1.0: USB hub found
[ 21.689903] hub 1-0:1.0: 2 ports detected
[ 21.697907] hda: max request size: 128KiB
[ 21.709594] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[ 21.709917] hda: cache flushes supported
[ 21.710017] hda: hda1 hda2 < hda5 >
[ 21.779295] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
[ 21.779644] Uniform CD-ROM driver Revision: 3.20
[ 21.792291] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 21.792457] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.792742] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 21.792838] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e400
[ 21.793398] usb usb2: configuration #1 chosen from 1 choice
[ 21.793751] hub 2-0:1.0: USB hub found
[ 21.793818] hub 2-0:1.0: 2 ports detected
[ 21.895805] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 21.895972] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.896057] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 21.896149] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e500
[ 21.896304] usb usb3: configuration #1 chosen from 1 choice
[ 21.896388] hub 3-0:1.0: USB hub found
[ 21.896449] hub 3-0:1.0: 2 ports detected
[ 22.000233] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 22.000399] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 22.000691] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 22.000789] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e600
[ 22.001385] usb usb4: configuration #1 chosen from 1 choice
[ 22.001682] hub 4-0:1.0: USB hub found
[ 22.001748] hub 4-0:1.0: 2 ports detected
[ 22.104414] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 22.104581] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 22.104943] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 22.105058] ehci_hcd 0000:00:10.4: irq 17, io mem 0xf6000000
[ 22.105121] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.105761] usb usb5: configuration #1 chosen from 1 choice
[ 22.106079] hub 5-0:1.0: USB hub found
[ 22.106144] hub 5-0:1.0: 8 ports detected
[ 22.208128] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 22.208199] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 22.212381] eth0: VIA Rhine II at 0x1dc00, 00:e0:4c:eb:85:3e, IRQ 18.
[ 22.213393] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 22.691452] Attempting manual resume
[ 22.691510] swsusp: Resume From Partition 3:5
[ 22.691512] PM: Checking swsusp image.
[ 22.691700] PM: Resume from disk failed.
[ 22.722032] kjournald starting. Commit interval 5 seconds
[ 22.722106] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.395550] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 23.584537] usb 2-2: configuration #1 chosen from 1 choice
[ 31.561848] Linux agpgart interface v0.102 (c) Dave Jones
[ 31.569468] agpgart: Detected AGP bridge 0
[ 31.574546] agpgart: AGP aperture is 128M @ 0xe8000000
[ 31.639983] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.664617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.402082] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
[ 32.402192] usbcore: registered new interface driver usblp
[ 32.402251] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 33.055286] input: PC Speaker as /class/input/input2
[ 33.420260] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 33.423319] parport_pc 00:0a: reported by Plug and Play ACPI
[ 33.423463] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.432283] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 33.432352] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 33.434607] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 33.943692] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 33.943985] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 35.525537] lp0: using parport0 (interrupt-driven).
[ 35.573323] Adding 2072344k swap on /dev/hda5. Priority:-1 extents:1 across:2072344k
[ 35.863699] EXT3 FS on hda1, internal journal
[ 41.213802] No dock devices found.
[ 41.314673] input: Power Button (FF) as /class/input/input4
[ 41.319795] ACPI: Power Button (FF) [PWRF]
[ 41.358790] input: Power Button (CM) as /class/input/input5
[ 41.363878] ACPI: Power Button (CM) [PWRB]
[ 41.397851] input: Sleep Button (CM) as /class/input/input6
[ 41.398162] ACPI: Sleep Button (CM) [SLPB]
[ 41.773865] powernow-k8: Power state transitions not supported
[ 41.813845] ACPI Exception (processor_perflib-0234): AE_NOT_FOUND, Evaluating _PSS [20070126]
[ 43.167357] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 43.362927] ppdev: user-space parallel port driver
[ 45.571697] audit(1207349615.999:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5055 profile="/usr/sbin/cupsd"
[ 45.783437] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 45.783443] apm: overridden by ACPI.
[ 46.568785] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 46.743519] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 46.769453] NFSD: starting 90-second grace period
[ 47.270677] Failure registering capabilities with primary security module.
[ 47.499952] Bluetooth: Core ver 2.11
[ 47.500075] NET: Registered protocol family 31
[ 47.500078] Bluetooth: HCI device and connection manager initialized
[ 47.500082] Bluetooth: HCI socket layer initialized
[ 47.519445] Bluetooth: L2CAP ver 2.8
[ 47.519450] Bluetooth: L2CAP socket layer initialized
[ 47.636465] Bluetooth: RFCOMM socket layer initialized
[ 47.636569] Bluetooth: RFCOMM TTY layer initialized
[ 47.636572] Bluetooth: RFCOMM ver 1.8
[ 49.935844] [drm] Initialized drm 1.1.0 20060810
[ 49.977088] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 49.977361] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 49.980327] [drm] Initialized via 2.11.1 20070202 on minor 1
[ 50.171204] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 50.171319] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
[ 50.171412] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 50.171556] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 50.685486] irq 20: nobody cared (try booting with the "irqpoll" option)
[ 50.685525] [<c015b5b4>] __report_bad_irq+0x24/0x80
[ 50.685554] [<c015b872>] note_interrupt+0x262/0x2a0
[ 50.685591] [<c015aad0>] handle_IRQ_event+0x30/0x60
[ 50.685613] [<c015c25b>] handle_fasteoi_irq+0xbb/0xf0
[ 50.685635] [<c0106b1b>] do_IRQ+0x3b/0x70
[ 50.685644] [<c0106b20>] do_IRQ+0x40/0x70
[ 50.685669] [<c0105223>] common_interrupt+0x23/0x30
[ 50.685724] [<ec95bd14>] ide_outb+0x4/0x10 [ide_core]
[ 50.685756] [<ec918b02>] ide_do_rw_disk+0x392/0x500 [ide_disk]
[ 50.685825] [<ec9596e6>] ide_do_request+0x546/0xa00 [ide_core]
[ 50.685888] [<c02f410d>] _spin_unlock_irqrestore+0xd/0x20
[ 50.685905] [<ec9590b3>] ide_end_request+0x73/0x110 [ide_core]
[ 50.685943] [<ec9618fd>] ide_dma_intr+0x7d/0xc0 [ide_core]
[ 50.685986] [<ec959ec7>] ide_intr+0x207/0x210 [ide_core]
[ 50.686012] [<c013eeb6>] ktime_get_ts+0x16/0x50
[ 50.686027] [<ec961880>] ide_dma_intr+0x0/0xc0 [ide_core]
[ 50.686058] [<c015aad0>] handle_IRQ_event+0x30/0x60
[ 50.686078] [<c015c336>] handle_edge_irq+0xa6/0x120
[ 50.686098] [<c0106b1b>] do_IRQ+0x3b/0x70
[ 50.686114] [<c0102e00>] default_idle+0x0/0x60
[ 50.686130] [<c0105223>] common_interrupt+0x23/0x30
[ 50.686134] [<c0102e00>] default_idle+0x0/0x60
[ 50.686180] [<c011dba2>] native_safe_halt+0x2/0x10
[ 50.686193] [<c0102e3c>] default_idle+0x3c/0x60
[ 50.686196] [<c0102413>] cpu_idle+0x53/0xe0
[ 50.686220] [<c03e3a85>] start_kernel+0x325/0x3b0
[ 50.686231] [<c03e31f0>] unknown_bootoption+0x0/0x260
[ 50.686278] =======================
[ 50.686280] handlers:
[ 50.686282] [<ecd5e480>] (via_driver_irq_handler+0x0/0x1d0 [via])
[ 50.686291] Disabling IRQ #20
[ 52.047184] NET: Registered protocol family 17
[ 69.493851] cdrom: hdb: mrw address space DMA selected
[ 72.386309] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 72.418796] ISO 9660 Extensions: RRIP_1991A

 Y ahora resulta imposible volver a montar el mismo CD que saque.
Este es el listado de cat/var/log/messages

4/108
Apr 4 19:53:32 favero-desktop kernel: [ 17.272563] NET: Registered protocol family 16
Apr 4 19:53:32 favero-desktop kernel: [ 17.272723] EISA bus registered
Apr 4 19:53:32 favero-desktop kernel: [ 17.272795] ACPI: bus type pci registered
Apr 4 19:53:32 favero-desktop kernel: [ 17.280507] PCI: PCI BIOS revision 2.10 entry at 0xf9ff0, last bus=1
Apr 4 19:53:32 favero-desktop kernel: [ 17.280566] PCI: Using configuration type 1
Apr 4 19:53:32 favero-desktop kernel: [ 17.280622] Setting up standard PCI resources
Apr 4 19:53:32 favero-desktop kernel: [ 17.290404] ACPI: Interpreter enabled
Apr 4 19:53:32 favero-desktop kernel: [ 17.290467] ACPI: (supports S0 S1 S4 S5)
Apr 4 19:53:32 favero-desktop kernel: [ 17.290738] ACPI: Using IOAPIC for interrupt routing
Apr 4 19:53:32 favero-desktop kernel: [ 17.298329] ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 4 19:53:32 favero-desktop kernel: [ 17.359365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
Apr 4 19:53:32 favero-desktop kernel: [ 17.359991] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Apr 4 19:53:32 favero-desktop kernel: [ 17.360583] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
Apr 4 19:53:32 favero-desktop kernel: [ 17.361145] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Apr 4 19:53:32 favero-desktop kernel: [ 17.361793] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Apr 4 19:53:32 favero-desktop kernel: [ 17.362435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Apr 4 19:53:32 favero-desktop kernel: [ 17.363080] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Apr 4 19:53:32 favero-desktop kernel: [ 17.363723] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Apr 4 19:53:32 favero-desktop kernel: [ 17.364413] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
Apr 4 19:53:32 favero-desktop kernel: [ 17.364743] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
Apr 4 19:53:32 favero-desktop kernel: [ 17.365073] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
Apr 4 19:53:32 favero-desktop kernel: [ 17.365426] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
Apr 4 19:53:32 favero-desktop kernel: [ 17.365731] Linux Plug and Play Support v0.97 (c) Adam Belay
Apr 4 19:53:32 favero-desktop kernel: [ 17.365805] pnp: PnP ACPI init
Apr 4 19:53:32 favero-desktop kernel: [ 17.365873] ACPI: bus type pnp registered
Apr 4 19:53:32 favero-desktop kernel: [ 17.370804] pnp: PnP ACPI: found 15 devices
Apr 4 19:53:32 favero-desktop kernel: [ 17.370866] ACPI: ACPI bus type pnp unregistered
Apr 4 19:53:32 favero-desktop kernel: [ 17.370925] PnPBIOS: Disabled by ACPI PNP
Apr 4 19:53:32 favero-desktop kernel: [ 17.371036] PCI: Using ACPI for IRQ routing
Apr 4 19:53:32 favero-desktop kernel: [ 17.371094] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Apr 4 19:53:32 favero-desktop kernel: [ 17.401311] NET: Registered protocol family 8
Apr 4 19:53:32 favero-desktop kernel: [ 17.401367] NET: Registered protocol family 20
Apr 4 19:53:32 favero-desktop kernel: [ 17.401517] pnp: 00:00: iomem range 0xcf400-0xcffff has been reserved
Apr 4 19:53:32 favero-desktop kernel: [ 17.401578] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Apr 4 19:53:32 favero-desktop kernel: [ 17.401638] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Apr 4 19:53:32 favero-desktop kernel: [ 17.401698] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
Apr 4 19:53:32 favero-desktop kernel: [ 17.401764] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
Apr 4 19:53:32 favero-desktop kernel: [ 17.401824] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
Apr 4 19:53:32 favero-desktop kernel: [ 17.404092] Time: tsc clocksource has been installed.
Apr 4 19:53:32 favero-desktop kernel: [ 17.432186] PCI: Bridge: 0000:00:01.0
Apr 4 19:53:32 favero-desktop kernel: [ 17.432241] IO window: disabled.
Apr 4 19:53:32 favero-desktop kernel: [ 17.432299] MEM window: f4000000-f5ffffff
Apr 4 19:53:32 favero-desktop kernel: [ 17.432357] PREFETCH window: f0000000-f3ffffff
Apr 4 19:53:32 favero-desktop kernel: [ 17.432445] NET: Registered protocol family 2
Apr 4 19:53:32 favero-desktop kernel: [ 17.472142] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 4 19:53:32 favero-desktop kernel: [ 17.472384] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
Apr 4 19:53:32 favero-desktop kernel: [ 17.474611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Apr 4 19:53:32 favero-desktop kernel: [ 17.475390] TCP: Hash tables configured (established 131072 bind 65536)
Apr 4 19:53:32 favero-desktop kernel: [ 17.475454] TCP reno registered
Apr 4 19:53:32 favero-desktop kernel: [ 17.484231] checking if image is initramfs... it is
Apr 4 19:53:32 favero-desktop kernel: [ 17.936088] Switched to high resolution mode on CPU 0
Apr 4 19:53:32 favero-desktop kernel: [ 18.239471] Freeing initrd memory: 7591k freed
Apr 4 19:53:32 favero-desktop kernel: [ 18.239955] audit: initializing netlink socket (disabled)
Apr 4 19:53:32 favero-desktop kernel: [ 18.240038] audit(1207349588.160:1): initialized
Apr 4 19:53:32 favero-desktop kernel: [ 18.241885] VFS: Disk quotas dquot_6.5.1
Apr 4 19:53:32 favero-desktop kernel: [ 18.242000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 4 19:53:32 favero-desktop kernel: [ 18.242167] io scheduler noop registered
Apr 4 19:53:32 favero-desktop kernel: [ 18.242223] io scheduler anticipatory registered
Apr 4 19:53:32 favero-desktop kernel: [ 18.242280] io scheduler deadline registered
Apr 4 19:53:32 favero-desktop kernel: [ 18.242353] io scheduler cfq registered (default)
Apr 4 19:53:32 favero-desktop kernel: [ 18.242424] PCI: VIA PCI bridge detected. Disabling DAC.
Apr 4 19:53:32 favero-desktop kernel: [ 18.242727] isapnp: Scanning for PnP cards...
Apr 4 19:53:32 favero-desktop kernel: [ 18.596946] isapnp: No Plug & Play device found
Apr 4 19:53:32 favero-desktop kernel: [ 18.649658] Real Time Clock Driver v1.12ac
Apr 4 19:53:32 favero-desktop kernel: [ 18.649801] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Apr 4 19:53:32 favero-desktop kernel: [ 18.649966] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 4 19:53:32 favero-desktop kernel: [ 18.651249] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 4 19:53:32 favero-desktop kernel: [ 18.652181] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Apr 4 19:53:32 favero-desktop kernel: [ 18.652489] input: Macintosh mouse button emulation as /class/input/input0
Apr 4 19:53:32 favero-desktop kernel: [ 18.652629] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Apr 4 19:53:32 favero-desktop kernel: [ 18.653084] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 4 19:53:32 favero-desktop kernel: [ 18.653145] serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 4 19:53:32 favero-desktop kernel: [ 18.653357] mice: PS/2 mouse device common for all mice
Apr 4 19:53:32 favero-desktop kernel: [ 18.653530] EISA: Probing bus 0 at eisa.0
Apr 4 19:53:32 favero-desktop kernel: [ 18.653606] Cannot allocate resource for EISA slot 4
Apr 4 19:53:32 favero-desktop kernel: [ 18.653663] Cannot allocate resource for EISA slot 5
Apr 4 19:53:32 favero-desktop kernel: [ 18.653732] EISA: Detected 0 cards.
Apr 4 19:53:32 favero-desktop kernel: [ 18.653972] TCP cubic registered
Apr 4 19:53:32 favero-desktop kernel: [ 18.654044] NET: Registered protocol family 1
Apr 4 19:53:32 favero-desktop kernel: [ 18.654125] Using IPI No-Shortcut mode
Apr 4 19:53:32 favero-desktop kernel: [ 18.654384] Magic number: 4:959:905
Apr 4 19:53:32 favero-desktop kernel: [ 18.654508] hash matches device ptyz1
Apr 4 19:53:32 favero-desktop kernel: [ 18.654987] Freeing unused kernel memory: 364k freed
Apr 4 19:53:32 favero-desktop kernel: [ 18.688059] input: AT Translated Set 2 keyboard as /class/input/input1
Apr 4 19:53:32 favero-desktop kernel: [ 18.895497] AppArmor: AppArmor initialized<5>audit(1207349588.660:2): type=1505 info="AppArmor initialized" pid=1182
Apr 4 19:53:32 favero-desktop kernel: [ 18.902667] fuse init (API version 7.8)
Apr 4 19:53:32 favero-desktop kernel: [ 18.908223] Failure registering capabilities with primary security module.
Apr 4 19:53:32 favero-desktop kernel: [ 18.920664] ACPI: Fan [FAN] (on)
Apr 4 19:53:32 favero-desktop kernel: [ 18.927657] ACPI: Thermal Zone [THRM] (35 C)
Apr 4 19:53:32 favero-desktop kernel: [ 18.943184] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <email address hidden>
Apr 4 19:53:32 favero-desktop kernel: [ 19.697999] SCSI subsystem initialized
Apr 4 19:53:32 favero-desktop kernel: [ 19.704987] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Apr 4 19:53:32 favero-desktop kernel: [ 19.705056] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
Apr 4 19:53:32 favero-desktop kernel: [ 19.705255] sata_via 0000:00:0f.0: routed to hard irq line 11
Apr 4 19:53:32 favero-desktop kernel: [ 19.705407] scsi0 : sata_via
Apr 4 19:53:32 favero-desktop kernel: [ 19.705519] scsi1 : sata_via
Apr 4 19:53:32 favero-desktop kernel: [ 19.705604] ata1: SATA max UDMA/133 cmd 0x0001e100 ctl 0x0001e702 bmdma 0x0001e000 irq 16
Apr 4 19:53:32 favero-desktop kernel: [ 19.705676] ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e902 bmdma 0x0001e008 irq 16
Apr 4 19:53:32 favero-desktop kernel: [ 19.741203] usbcore: registered new interface driver usbfs
Apr 4 19:53:32 favero-desktop kernel: [ 19.741288] usbcore: registered new interface driver hub
Apr 4 19:53:32 favero-desktop kernel: [ 19.744172] usbcore: registered new device driver usb
Apr 4 19:53:32 favero-desktop kernel: [ 19.745224] USB Universal Host Controller Interface driver v3.0
Apr 4 19:53:32 favero-desktop kernel: [ 19.853581] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Apr 4 19:53:32 favero-desktop kernel: [ 19.853650] via-rhine: Broken BIOS detected, avoid_D3 enabled.
Apr 4 19:53:32 favero-desktop kernel: [ 19.907864] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Apr 4 19:53:32 favero-desktop kernel: [ 19.997005] Floppy drive(s): fd0 is 1.44M
Apr 4 19:53:32 favero-desktop kernel: [ 20.053259] FDC 0 is a post-1991 82077
Apr 4 19:53:32 favero-desktop kernel: [ 20.119834] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Apr 4 19:53:32 favero-desktop kernel: [ 20.136024] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Apr 4 19:53:32 favero-desktop kernel: [ 20.136090] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 4 19:53:32 favero-desktop kernel: [ 20.137162] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Apr 4 19:53:32 favero-desktop kernel: [ 20.137244] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
Apr 4 19:53:32 favero-desktop kernel: [ 20.137404] VP_IDE: chipset revision 6
Apr 4 19:53:32 favero-desktop kernel: [ 20.137460] VP_IDE: not 100%% native mode: will probe irqs later
Apr 4 19:53:32 favero-desktop kernel: [ 20.137528] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Apr 4 19:53:32 favero-desktop kernel: [ 20.137603] ide0: BM-DMA at 0xe200-0xe207, BIOS settings: hda:DMA, hdb:DMA
Apr 4 19:53:32 favero-desktop kernel: [ 20.137762] ide1: BM-DMA at 0xe208-0xe20f, BIOS settings: hdc:pio, hdd:pio
Apr 4 19:53:32 favero-desktop kernel: [ 20.551880] hda: WDC WD800BB-00JHC0, ATA DISK drive
Apr 4 19:53:32 favero-desktop kernel: [ 20.999845] hdb: HL-DT-ST GCE-8527B, ATAPI CD/DVD-ROM drive
Apr 4 19:53:32 favero-desktop kernel: [ 21.104778] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 4 19:53:32 favero-desktop kernel: [ 21.688088] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Apr 4 19:53:32 favero-desktop kernel: [ 21.688159] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Apr 4 19:53:32 favero-desktop kernel: [ 21.688326] uhci_hcd 0000:00:10.0: UHCI Host Controller
Apr 4 19:53:32 favero-desktop kernel: [ 21.688880] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Apr 4 19:53:32 favero-desktop kernel: [ 21.688990] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e300
Apr 4 19:53:32 favero-desktop kernel: [ 21.689583] usb usb1: configuration #1 chosen from 1 choice
Apr 4 19:53:32 favero-desktop kernel: [ 21.689837] hub 1-0:1.0: USB hub found
Apr 4 19:53:32 favero-desktop kernel: [ 21.689903] hub 1-0:1.0: 2 ports detected
Apr 4 19:53:32 favero-desktop kernel: [ 21.697907] hda: max request size: 128KiB
Apr 4 19:53:32 favero-desktop kernel: [ 21.709594] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Apr 4 19:53:32 favero-desktop kernel: [ 21.709917] hda: cache flushes supported
Apr 4 19:53:32 favero-desktop kernel: [ 21.710017] hda: hda1 hda2 < hda5 >
Apr 4 19:53:32 favero-desktop kernel: [ 21.779295] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
Apr 4 19:53:32 favero-desktop kernel: [ 21.779644] Uniform CD-ROM driver Revision: 3.20
Apr 4 19:53:32 favero-desktop kernel: [ 21.792291] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Apr 4 19:53:32 favero-desktop kernel: [ 21.792457] uhci_hcd 0000:00:10.1: UHCI Host Controller
Apr 4 19:53:32 favero-desktop kernel: [ 21.792742] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Apr 4 19:53:32 favero-desktop kernel: [ 21.792838] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e400
Apr 4 19:53:32 favero-desktop kernel: [ 21.793398] usb usb2: configuration #1 chosen from 1 choice
Apr 4 19:53:32 favero-desktop kernel: [ 21.793751] hub 2-0:1.0: USB hub found
Apr 4 19:53:32 favero-desktop kernel: [ 21.793818] hub 2-0:1.0: 2 ports detected
Apr 4 19:53:32 favero-desktop kernel: [ 21.895805] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Apr 4 19:53:32 favero-desktop kernel: [ 21.895972] uhci_hcd 0000:00:10.2: UHCI Host Controller
Apr 4 19:53:32 favero-desktop kernel: [ 21.896057] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Apr 4 19:53:32 favero-desktop kernel: [ 21.896149] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e500
Apr 4 19:53:32 favero-desktop kernel: [ 21.896304] usb usb3: configuration #1 chosen from 1 choice
Apr 4 19:53:32 favero-desktop kernel: [ 21.896388] hub 3-0:1.0: USB hub found
Apr 4 19:53:32 favero-desktop kernel: [ 21.896449] hub 3-0:1.0: 2 ports detected
Apr 4 19:53:32 favero-desktop kernel: [ 22.000233] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Apr 4 19:53:32 favero-desktop kernel: [ 22.000399] uhci_hcd 0000:00:10.3: UHCI Host Controller
Apr 4 19:53:32 favero-desktop kernel: [ 22.000691] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Apr 4 19:53:32 favero-desktop kernel: [ 22.000789] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000e600
Apr 4 19:53:32 favero-desktop kernel: [ 22.001385] usb usb4: configuration #1 chosen from 1 choice
Apr 4 19:53:32 favero-desktop kernel: [ 22.001682] hub 4-0:1.0: USB hub found
Apr 4 19:53:32 favero-desktop kernel: [ 22.001748] hub 4-0:1.0: 2 ports detected
Apr 4 19:53:32 favero-desktop kernel: [ 22.104414] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Apr 4 19:53:32 favero-desktop kernel: [ 22.104581] ehci_hcd 0000:00:10.4: EHCI Host Controller
Apr 4 19:53:32 favero-desktop kernel: [ 22.104943] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Apr 4 19:53:32 favero-desktop kernel: [ 22.105058] ehci_hcd 0000:00:10.4: irq 17, io mem 0xf6000000
Apr 4 19:53:32 favero-desktop kernel: [ 22.105121] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr 4 19:53:32 favero-desktop kernel: [ 22.105761] usb usb5: configuration #1 chosen from 1 choice
Apr 4 19:53:32 favero-desktop kernel: [ 22.106079] hub 5-0:1.0: USB hub found
Apr 4 19:53:32 favero-desktop kernel: [ 22.106144] hub 5-0:1.0: 8 ports detected
Apr 4 19:53:32 favero-desktop kernel: [ 22.208128] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
Apr 4 19:53:32 favero-desktop kernel: [ 22.208199] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
Apr 4 19:53:32 favero-desktop kernel: [ 22.212381] eth0: VIA Rhine II at 0x1dc00, 00:e0:4c:eb:85:3e, IRQ 18.
Apr 4 19:53:32 favero-desktop kernel: [ 22.213393] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Apr 4 19:53:32 favero-desktop kernel: [ 22.691452] Attempting manual resume
Apr 4 19:53:32 favero-desktop kernel: [ 22.722032] kjournald starting. Commit interval 5 seconds
Apr 4 19:53:32 favero-desktop kernel: [ 22.722106] EXT3-fs: mounted filesystem with ordered data mode.
Apr 4 19:53:32 favero-desktop kernel: [ 23.395550] usb 2-2: new full speed USB device using uhci_hcd and address 2
Apr 4 19:53:32 favero-desktop kernel: [ 23.584537] usb 2-2: configuration #1 chosen from 1 choice
Apr 4 19:53:32 favero-desktop kernel: [ 31.561848] Linux agpgart interface v0.102 (c) Dave Jones
Apr 4 19:53:32 favero-desktop kernel: [ 31.569468] agpgart: Detected AGP bridge 0
Apr 4 19:53:32 favero-desktop kernel: [ 31.574546] agpgart: AGP aperture is 128M @ 0xe8000000
Apr 4 19:53:32 favero-desktop kernel: [ 31.639983] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr 4 19:53:32 favero-desktop kernel: [ 31.664617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Apr 4 19:53:32 favero-desktop kernel: [ 32.402082] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
Apr 4 19:53:32 favero-desktop kernel: [ 32.402192] usbcore: registered new interface driver usblp
Apr 4 19:53:32 favero-desktop kernel: [ 32.402251] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Apr 4 19:53:32 favero-desktop kernel: [ 33.055286] input: PC Speaker as /class/input/input2
Apr 4 19:53:32 favero-desktop kernel: [ 33.420260] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
Apr 4 19:53:32 favero-desktop kernel: [ 33.423319] parport_pc 00:0a: reported by Plug and Play ACPI
Apr 4 19:53:32 favero-desktop kernel: [ 33.423463] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Apr 4 19:53:32 favero-desktop kernel: [ 33.432283] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Apr 4 19:53:32 favero-desktop kernel: [ 33.432352] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
Apr 4 19:53:32 favero-desktop kernel: [ 33.943692] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
Apr 4 19:53:32 favero-desktop kernel: [ 35.525537] lp0: using parport0 (interrupt-driven).
Apr 4 19:53:32 favero-desktop kernel: [ 35.573323] Adding 2072344k swap on /dev/hda5. Priority:-1 extents:1 across:2072344k
Apr 4 19:53:32 favero-desktop kernel: [ 35.863699] EXT3 FS on hda1, internal journal
Apr 4 19:53:32 favero-desktop kernel: [ 41.213802] No dock devices found.
Apr 4 19:53:32 favero-desktop kernel: [ 41.314673] input: Power Button (FF) as /class/input/input4
Apr 4 19:53:32 favero-desktop kernel: [ 41.319795] ACPI: Power Button (FF) [PWRF]
Apr 4 19:53:32 favero-desktop kernel: [ 41.358790] input: Power Button (CM) as /class/input/input5
Apr 4 19:53:32 favero-desktop kernel: [ 41.363878] ACPI: Power Button (CM) [PWRB]
Apr 4 19:53:32 favero-desktop kernel: [ 41.397851] input: Sleep Button (CM) as /class/input/input6
Apr 4 19:53:32 favero-desktop kernel: [ 41.398162] ACPI: Sleep Button (CM) [SLPB]
Apr 4 19:53:32 favero-desktop kernel: [ 41.773865] powernow-k8: Power state transitions not supported
Apr 4 19:53:33 favero-desktop kernel: [ 43.167357] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 4 19:53:33 favero-desktop kernel: [ 43.362927] ppdev: user-space parallel port driver
Apr 4 19:53:36 favero-desktop kernel: [ 45.571697] audit(1207349615.999:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5055 profile="/usr/sbin/cupsd"
Apr 4 19:53:36 favero-desktop kernel: [ 45.783437] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Apr 4 19:53:36 favero-desktop kernel: [ 45.783443] apm: overridden by ACPI.
Apr 4 19:53:37 favero-desktop kernel: [ 46.568785] Installing knfsd (copyright (C) 1996 <email address hidden>).
Apr 4 19:53:37 favero-desktop kernel: [ 46.743519] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Apr 4 19:53:37 favero-desktop kernel: [ 46.769453] NFSD: starting 90-second grace period
Apr 4 19:53:37 favero-desktop kernel: [ 47.270677] Failure registering capabilities with primary security module.
Apr 4 19:53:37 favero-desktop dhcdbd: Started up.
Apr 4 19:53:38 favero-desktop kernel: [ 47.499952] Bluetooth: Core ver 2.11
Apr 4 19:53:38 favero-desktop kernel: [ 47.500075] NET: Registered protocol family 31
Apr 4 19:53:38 favero-desktop kernel: [ 47.500078] Bluetooth: HCI device and connection manager initialized
Apr 4 19:53:38 favero-desktop kernel: [ 47.500082] Bluetooth: HCI socket layer initialized
Apr 4 19:53:38 favero-desktop kernel: [ 47.519445] Bluetooth: L2CAP ver 2.8
Apr 4 19:53:38 favero-desktop kernel: [ 47.519450] Bluetooth: L2CAP socket layer initialized
Apr 4 19:53:38 favero-desktop kernel: [ 47.636465] Bluetooth: RFCOMM socket layer initialized
Apr 4 19:53:38 favero-desktop kernel: [ 47.636569] Bluetooth: RFCOMM TTY layer initialized
Apr 4 19:53:38 favero-desktop kernel: [ 47.636572] Bluetooth: RFCOMM ver 1.8
Apr 4 19:53:40 favero-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Apr 4 19:53:40 favero-desktop kernel: [ 49.935844] [drm] Initialized drm 1.1.0 20060810
Apr 4 19:53:40 favero-desktop kernel: [ 49.977088] [drm] Initialized via 2.11.1 20070202 on minor 0
Apr 4 19:53:40 favero-desktop kernel: [ 49.977361] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
Apr 4 19:53:40 favero-desktop kernel: [ 49.980327] [drm] Initialized via 2.11.1 20070202 on minor 1
Apr 4 19:53:40 favero-desktop kernel: [ 50.171204] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Apr 4 19:53:40 favero-desktop kernel: [ 50.171319] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
Apr 4 19:53:40 favero-desktop kernel: [ 50.171412] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Apr 4 19:53:40 favero-desktop kernel: [ 50.171556] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Apr 4 19:53:41 favero-desktop kernel: [ 50.685525] [__report_bad_irq+36/128] __report_bad_irq+0x24/0x80
Apr 4 19:53:41 favero-desktop kernel: [ 50.685554] [note_interrupt+610/672] note_interrupt+0x262/0x2a0
Apr 4 19:53:41 favero-desktop kernel: [ 50.685591] [handle_IRQ_event+48/96] handle_IRQ_event+0x30/0x60
Apr 4 19:53:41 favero-desktop kernel: [ 50.685613] [handle_fasteoi_irq+187/240] handle_fasteoi_irq+0xbb/0xf0
Apr 4 19:53:41 favero-desktop kernel: [ 50.685635] [do_IRQ+59/112] do_IRQ+0x3b/0x70
Apr 4 19:53:41 favero-desktop kernel: [ 50.685644] [do_IRQ+64/112] do_IRQ+0x40/0x70
Apr 4 19:53:41 favero-desktop kernel: [ 50.685669] [common_interrupt+35/48] common_interrupt+0x23/0x30
Apr 4 19:53:41 favero-desktop kernel: [ 50.685724] [<ec95bd14>] ide_outb+0x4/0x10 [ide_core]
Apr 4 19:53:41 favero-desktop kernel: [ 50.685756] [<ec918b02>] ide_do_rw_disk+0x392/0x500 [ide_disk]
Apr 4 19:53:41 favero-desktop kernel: [ 50.685825] [<ec9596e6>] ide_do_request+0x546/0xa00 [ide_core]
Apr 4 19:53:41 favero-desktop kernel: [ 50.685888] [_spin_unlock_irqrestore+13/32] _spin_unlock_irqrestore+0xd/0x20
Apr 4 19:53:41 favero-desktop kernel: [ 50.685905] [<ec9590b3>] ide_end_request+0x73/0x110 [ide_core]
Apr 4 19:53:41 favero-desktop kernel: [ 50.685943] [<ec9618fd>] ide_dma_intr+0x7d/0xc0 [ide_core]
Apr 4 19:53:41 favero-desktop kernel: [ 50.685986] [<ec959ec7>] ide_intr+0x207/0x210 [ide_core]
Apr 4 19:53:41 favero-desktop kernel: [ 50.686012] [ktime_get_ts+22/80] ktime_get_ts+0x16/0x50
Apr 4 19:53:41 favero-desktop kernel: [ 50.686027] [<ec961880>] ide_dma_intr+0x0/0xc0 [ide_core]
Apr 4 19:53:41 favero-desktop kernel: [ 50.686058] [handle_IRQ_event+48/96] handle_IRQ_event+0x30/0x60
Apr 4 19:53:41 favero-desktop kernel: [ 50.686078] [handle_edge_irq+166/288] handle_edge_irq+0xa6/0x120
Apr 4 19:53:41 favero-desktop kernel: [ 50.686098] [do_IRQ+59/112] do_IRQ+0x3b/0x70
Apr 4 19:53:41 favero-desktop kernel: [ 50.686114] [default_idle+0/96] default_idle+0x0/0x60
Apr 4 19:53:41 favero-desktop kernel: [ 50.686130] [common_interrupt+35/48] common_interrupt+0x23/0x30
Apr 4 19:53:41 favero-desktop kernel: [ 50.686134] [default_idle+0/96] default_idle+0x0/0x60
Apr 4 19:53:41 favero-desktop kernel: [ 50.686180] [native_safe_halt+2/16] native_safe_halt+0x2/0x10
Apr 4 19:53:41 favero-desktop kernel: [ 50.686193] [default_idle+60/96] default_idle+0x3c/0x60
Apr 4 19:53:41 favero-desktop kernel: [ 50.686196] [cpu_idle+83/224] cpu_idle+0x53/0xe0
Apr 4 19:53:41 favero-desktop kernel: [ 50.686220] [start_kernel+805/944] start_kernel+0x325/0x3b0
Apr 4 19:53:41 favero-desktop kernel: [ 50.686231] [unknown_bootoption+0/608] unknown_bootoption+0x0/0x260
Apr 4 19:53:41 favero-desktop kernel: [ 50.686278] =======================
Apr 4 19:53:42 favero-desktop kernel: [ 52.047184] NET: Registered protocol family 17
Apr 4 19:53:43 favero-desktop python: hp-probe[5916]: warning: No devices found on the 'usb' bus. If this isn't the result you are expecting,
Apr 4 19:53:43 favero-desktop python: hp-probe[5916]: warning: check to make sure your devices are properly connected and powered on.
Apr 4 19:53:44 favero-desktop python: hp-probe[5924]: warning: No devices found on the 'usb' bus. If this isn't the result you are expecting,
Apr 4 19:53:44 favero-desktop python: hp-probe[5924]: warning: check to make sure your devices are properly connected and powered on.
Apr 4 19:53:48 favero-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name
Apr 4 19:53:48 favero-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Apr 4 19:53:48 favero-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Apr 4 19:54:00 favero-desktop kernel: [ 69.493851] cdrom: hdb: mrw address space DMA selected

Hola de nuevo.

¿Qué pasó entonces que antes decías que no salía nada? Lo digo para explicarme mejor la próxima vez.

El problema parece que está con el driver de tu placa base. Parece que tiene problemas con los IRQ. La parte fundamental que creo que es la raíz del problema es esta:

[ 50.685486] irq 20: nobody cared (try booting with the "irqpoll" option)
 [ 50.685525] [<c015b5b4>] __report_bad_irq+0x24/0x80
 [ 50.685554] [<c015b872>] note_interrupt+0x262/0x2a0
 [ 50.685591] [<c015aad0>] handle_IRQ_event+0x30/0x60
 [ 50.685613] [<c015c25b>] handle_fasteoi_irq+0xbb/0xf0
 [ 50.685635] [<c0106b1b>] do_IRQ+0x3b/0x70
 [ 50.685644] [<c0106b20>] do_IRQ+0x40/0x70
 [ 50.685669] [<c0105223>] common_interrupt+0x23/0x30
 [ 50.685724] [<ec95bd14>] ide_outb+0x4/0x10 [ide_core]
 [ 50.685756] [<ec918b02>] ide_do_rw_disk+0x392/0x500 [ide_disk]
 [ 50.685825] [<ec9596e6>] ide_do_request+0x546/0xa00 [ide_core]
 [ 50.685888] [<c02f410d>] _spin_unlock_irqrestore+0xd/0x20
 [ 50.685905] [<ec9590b3>] ide_end_request+0x73/0x110 [ide_core]
 [ 50.685943] [<ec9618fd>] ide_dma_intr+0x7d/0xc0 [ide_core]
 [ 50.685986] [<ec959ec7>] ide_intr+0x207/0x210 [ide_core]
 [ 50.686012] [<c013eeb6>] ktime_get_ts+0x16/0x50
 [ 50.686027] [<ec961880>] ide_dma_intr+0x0/0xc0 [ide_core]
 [ 50.686058] [<c015aad0>] handle_IRQ_event+0x30/0x60
 [ 50.686078] [<c015c336>] handle_edge_irq+0xa6/0x120
 [ 50.686098] [<c0106b1b>] do_IRQ+0x3b/0x70
 [ 50.686114] [<c0102e00>] default_idle+0x0/0x60
 [ 50.686130] [<c0105223>] common_interrupt+0x23/0x30
 [ 50.686134] [<c0102e00>] default_idle+0x0/0x60
 [ 50.686180] [<c011dba2>] native_safe_halt+0x2/0x10
 [ 50.686193] [<c0102e3c>] default_idle+0x3c/0x60
 [ 50.686196] [<c0102413>] cpu_idle+0x53/0xe0
 [ 50.686220] [<c03e3a85>] start_kernel+0x325/0x3b0
 [ 50.686231] [<c03e31f0>] unknown_bootoption+0x0/0x260
 [ 50.686278] =======================
 [ 50.686280] handlers:
 [ 50.686282] [<ecd5e480>] (via_driver_irq_handler+0x0/0x1d0 [via])
 [ 50.686291] Disabling IRQ #20

El problema pues parece un bug del kernel o de tu hardware, que el kernel debería ser capaz de resolver, en mi opinión. Vamos a intentar evitar que suceda eso o en el peor de los casos obtengamos información para avisar en "bugs" del problema.

Dinos la salida de este comando:
cat /proc/interrupts

Ah y se me olvidaba, atacando por otra vía diferente...

Mete un CD. Escribe en consola "mount /dev/hdd", sin las comillas. Vete al directorio /media/cdrom0. ¿Está ahí el contenido del CD?

Hola Jorge, aqui cat/proc/interrupts

    CPU0
  0: 159 IO-APIC-edge timer
  1: 295 IO-APIC-edge i8042
  6: 5 IO-APIC-edge floppy
  7: 0 IO-APIC-edge parport0
  8: 3 IO-APIC-edge rtc
  9: 0 IO-APIC-fasteoi acpi
 10: 0 IO-APIC-edge MPU401 UART
 12: 72261 IO-APIC-edge i8042
 14: 27556 IO-APIC-edge ide0
 16: 0 IO-APIC-fasteoi sata_via
 17: 86 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
 18: 764904 IO-APIC-fasteoi eth0
 19: 111 IO-APIC-fasteoi VIA82XX-MODEM, VIA8237
 20: 100001 IO-APIC-fasteoi via@pci:0000:01:00.0
NMI: 0
LOC: 223048
ERR: 0
MIS: 0

Suerte!

Agrego un comentario que puede ser de utilidad:
Si intento grabar un CD mediante Brasero , K3b u otro similar, no lo logro porque no puedo montar el CDR, apago la máquina y la enciendo y aparece montado el CDR virgen y me lo permite grabar. Luego lo retiro y no puedo montarlo nuevamente.

favero@favero-desktop:~$ mount /dev/hdd
mount: el dispositivo especial /dev/hdd no existe

Hoy (o ayer) ha salido el núcleo versión 2.6.24-15. Si actualizas tu sistema debería instalarte el nuevo núcleo. Instálalo a ver si sigues teniendo el mismo problema.