1: brcmwl-0: Wireless LAN Hard blocked: yes -> DISABLED Wireless Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) not working on HP Pavilion dv6-1030us Entertainment Notebook PC/3627, BIOS F.02 11/14/2008 in Ubuntu 15.04
new install of 15.04 wifi was off and could not be turnd on
tried to reinstall firmware driver cannot get it to install. this is for a Broadcom 4322ag 802.11a/b/g/ WiFi adapter. tring to install hybrid-
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Use a wired connection and get fully updated and reboot
Revision history for this message
|
#2 |
I am using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (propietary) I have downloaded hybrid-
Revision history for this message
|
#3 |
Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable) and apply all updates.
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1
In the Ubuntu Terminal console , make sure that unlimited scrolling is enabled:
click on Edit > Profiles > "Default" profile > Scrolling. Choose "Unlimited" as scrolling option. Click Close and Close again.
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface (default graphical user interface in Ubuntu), use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
So the methods in Unity are:
Press CTRL-ALT-T key combination.
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2
Please copy-paste the following diagnostic command from the
https:/
website using a web browser (like Google Chromium or Mozilla Firefox) into the Linux Terminal. The command STARTS with the word sudo and ENDS with the word lsmod. So please copy-paste the ENTIRE diagnostic command below from the web browser into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the diagnostic command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install usbutils pciutils hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scan | grep -Ei 'chan|ssid'; cat /etc/network/
Step 3
Please do NOT attempt to send any attachment(s). Please copy/paste the full terminal output at this location:
https:/
The troubleshooters at Launchpad need to see the full Terminal output from running the above diagnostic command.
Step 4
Please also specify the exact model and make of your PC (if known) when creating the new Launchpad question.
Please also specify the name of the wireless access point that you are trying to connect to (not the model/make of your router).
Step 5
Please also clarify if you installed Ubuntu to the harddisk and are running from a harddisk install OR if you are only testing Ubuntu in a Live CD session.
Revision history for this message
|
#4 |
the resalts of the scan are:
Ign http://
Ign http://
Ign http://
Ign http://
Get:1 http://
Ign http://
Hit http://
Get:2 http://
Hit http://
Hit http://
Get:3 http://
Get:4 http://
Hit http://
Hit http://
Get:5 http://
Hit http://
Hit http://
Get:6 http://
Hit http://
Get:7 http://
Get:8 http://
Hit http://
Hit http://
Get:9 http://
Hit http://
Get:10 http://
Hit http://
Hit http://
Get:11 http://
Hit http://
Get:12 http://
Hit http://
Get:13 http://
Hit http://
Hit http://
Get:14 http://
Hit http://
Get:15 http://
Hit http://
Get:16 http://
Hit http://
Hit http://
Get:17 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:18 http://
Hit http://
Hit http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Get:26 http://
Get:27 http://
Get:28 http://
Get:29 http://
Get:30 http://
Get:31 http://
Hit http://
Hit http://
Get:32 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Fetched 1,057 kB in 50s (21.1 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package hwinfo is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'hwinfo' has no installation candidate
*-network DISABLED
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 01
serial: 00:21:00:d4:90:0b
width: 64 bits
clock: 33MHz
resources: irq:16 memory:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth0
version: 02
serial: 00:23:8b:a1:15:63
size: 100Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
resources: irq:29 ioport:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: yes
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
lo Interface doesn't support scanning.
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
02:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:137f]
Kernel driver in use: wl
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3627]
Kernel driver in use: r8169
Bus 002 Device 002: ID 064e:c107 Suyin Corp. HP webcam [dv6-1190en]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Error: Object 'nm' is unknown, try 'nmcli help'.
H/W path Device Class Description
=======
/0 bus Motherboard
/0/0 memory 3883MiB System memory
/0/1 processor Intel(R) Core(TM)2 Duo CPU T6
/0/100 bridge Mobile 4 Series Chipset Memory Co
/0/100/2 display Mobile 4 Series Chipset Integrate
/0/100/2.1 display Mobile 4 Series Chipset Integrate
/0/100/1a bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1a/1 usb3 bus UHCI Host Controller
/0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1a.1/1 usb4 bus UHCI Host Controller
/0/100/1a.1/1/2 input USB Receiver
/0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Co
/0/100/1a.7/1 usb1 bus EHCI Host Controller
/0/100/1a.7/1/1 scsi6 storage USB2.0-CRW
/0/100/
/0/100/1b multimedia 82801I (ICH9 Family) HD Audio Con
/0/100/1c bridge 82801I (ICH9 Family) PCI Express
/0/100/1c/0 wlan0 network BCM4322 802.11a/b/g/n Wireless LA
/0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express
/0/100/1c.1/0 eth0 network RTL8101E/RTL8102E PCI Express Fas
/0/100/1c.3 bridge 82801I (ICH9 Family) PCI Express
/0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express
/0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express
/0/100/1d bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1d/1 usb5 bus UHCI Host Controller
/0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1d.1/1 usb6 bus UHCI Host Controller
/0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1d.2/1 usb7 bus UHCI Host Controller
/0/100/1d.3 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1d.3/1 usb8 bus UHCI Host Controller
/0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Co
/0/100/1d.7/1 usb2 bus EHCI Host Controller
/0/100/1d.7/1/4 multimedia HP Webcam
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge ICH9M LPC Interface Controller
/0/100/1f.2 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 po
/0/100/1f.3 bus 82801I (ICH9 Family) SMBus Contro
/0/100/1f.6 generic 82801I (ICH9 Family) Thermal Subs
/0/2 scsi0 storage
/0/2/0.0.0 /dev/sda disk 1TB WDC WD10JPVX-22J
/0/2/0.0.0/1 /dev/sda1 volume 927GiB EXT4 volume
/0/2/0.0.0/2 /dev/sda2 volume 4026MiB Extended partition
/0/2/0.0.0/2/5 /dev/sda5 volume 4026MiB Linux swap / Solaris part
/0/3 scsi1 storage
/0/3/0.0.0 /dev/cdrom disk DVDRAM GSA-T50L
Linux HP-Pavilion-
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3627, BIOS F.02 11/14/2008
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] No NUMA configuration found
[ 0.000000] AGP: No AGP bridge found
BIOS vendor: Hewlett-Packard; Ver: F.02; Product Version: F.02
[ 0.000000] Hardware name: Hewlett-Packard HP Pavilion dv6 Notebook PC/3627, BIOS F.02 11/14/2008
[ 0.000000] [<ffffffff81076
[ 0.000000] [<ffffffff81076
[ 0.125667] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.313216] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.318754] pci 0000:02:00.0: [14e4:432b] type 00 class 0x028000
[ 0.318790] pci 0000:02:00.0: reg 0x10: [mem 0xd9500000-
[ 0.318973] pci 0000:02:00.0: supports D1 D2
[ 0.334453] usbcore: registered new interface driver usbfs
[ 0.334453] usbcore: registered new interface driver hub
[ 0.334453] usbcore: registered new device driver usb
[ 0.338081] Switched to clocksource hpet
[ 0.347261] pnp: PnP ACPI: found 6 devices
[ 0.806904] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.808575] Console: switching to colour frame buffer device 128x48
[ 0.809456] input: Lid Switch as /devices/
[ 0.810045] ACPI: Lid Switch [LID0]
[ 0.811065] [Firmware Bug]: Invalid critical threshold (0)
[ 0.832197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.832202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.832207] usb usb1: Product: EHCI Host Controller
[ 0.832211] usb usb1: Manufacturer: Linux 3.19.0-21-generic ehci_hcd
[ 0.832214] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.832479] hub 1-0:1.0: USB hub found
[ 0.848186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.848191] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.848195] usb usb2: Product: EHCI Host Controller
[ 0.848199] usb usb2: Manufacturer: Linux 3.19.0-21-generic ehci_hcd
[ 0.848203] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.848442] hub 2-0:1.0: USB hub found
[ 0.849037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.849039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.849042] usb usb3: Product: UHCI Host Controller
[ 0.849044] usb usb3: Manufacturer: Linux 3.19.0-21-generic uhci_hcd
[ 0.849047] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.849208] hub 3-0:1.0: USB hub found
[ 0.849586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.849589] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.849591] usb usb4: Product: UHCI Host Controller
[ 0.849594] usb usb4: Manufacturer: Linux 3.19.0-21-generic uhci_hcd
[ 0.849596] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.849748] hub 4-0:1.0: USB hub found
[ 0.850116] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.850119] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.850122] usb usb5: Product: UHCI Host Controller
[ 0.850124] usb usb5: Manufacturer: Linux 3.19.0-21-generic uhci_hcd
[ 0.850126] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.850278] hub 5-0:1.0: USB hub found
[ 0.850649] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.850652] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.850654] usb usb6: Product: UHCI Host Controller
[ 0.850657] usb usb6: Manufacturer: Linux 3.19.0-21-generic uhci_hcd
[ 0.850659] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.850811] hub 6-0:1.0: USB hub found
[ 0.851177] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.851179] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.851182] usb usb7: Product: UHCI Host Controller
[ 0.851184] usb usb7: Manufacturer: Linux 3.19.0-21-generic uhci_hcd
[ 0.851187] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.851326] hub 7-0:1.0: USB hub found
[ 0.851705] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.851708] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.851711] usb usb8: Product: UHCI Host Controller
[ 0.851713] usb usb8: Manufacturer: Linux 3.19.0-21-generic uhci_hcd
[ 0.851715] usb usb8: SerialNumber: 0000:00:1d.3
[ 0.851860] hub 8-0:1.0: USB hub found
[ 0.877925] PCCT header not found.
[ 0.880299] Loaded X.509 cert 'Magrathea: Glacier signing key: 333a84cc9705ddb
[ 0.888356] ima: No TPM chip found, activating TPM-bypass!
[ 0.889517] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.951990] r8169 0000:03:00.0 eth0: RTL8102e at 0xffffc9000067e000, 00:23:8b:a1:15:63, XID 04a00000 IRQ 29
[ 1.144048] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.160057] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 1.287081] usb 1-1: New USB device found, idVendor=0bda, idProduct=0158
[ 1.287087] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.287091] usb 1-1: Product: USB2.0-CRW
[ 1.287095] usb 1-1: Manufacturer: Generic
[ 1.287099] usb 1-1: SerialNumber: 20071114173400000
[ 1.295822] usbcore: registered new interface driver usb-storage
[ 1.297782] usbcore: registered new interface driver uas
[ 1.302401] scsi host6: usb-storage 1-1:1.0
[ 1.302563] usbcore: registered new interface driver ums-realtek
[ 1.331672] usb 2-4: New USB device found, idVendor=064e, idProduct=c107
[ 1.331678] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.331682] usb 2-4: Product: HP Webcam
[ 1.331686] usb 2-4: Manufacturer: SuYin
[ 1.331690] usb 2-4: SerialNumber: CN0314-
[ 6.234559] lp: driver loaded but no devices found
[ 9.663639] ene_ir: Firmware regs: c0 01
[ 9.805151] lis3lv02d: 8 bits sensor found
[ 9.841772] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.146727] cfg80211: Calling CRDA to update world regulatory domain
[ 10.466306] wl: module license 'MIXED/Proprietary' taints kernel.
[ 10.473693] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 10.502547] wlan0: Broadcom BCM432b 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[ 10.751522] fb: switching to inteldrmfb from VESA VGA
[ 10.751576] Console: switching to colour dummy device 80x25
[ 10.881336] Console: switching to colour frame buffer device 170x48
[ 10.909336] sound hdaudioC0D0: autoconfig: line_outs=1 (0xf/0x0/
[ 10.909342] sound hdaudioC0D0: speaker_outs=1 (0xd/0x0/
[ 10.909345] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/
[ 10.909347] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.909350] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 10.909352] sound hdaudioC0D0: inputs:
[ 10.909355] sound hdaudioC0D0: Internal Mic=0x18
[ 10.909357] sound hdaudioC0D0: Mic=0xb
[ 11.129088] input: HDA Intel Mic as /devices/
[ 11.129192] input: HDA Intel Front Line Out as /devices/
[ 11.129295] input: HDA Intel HDMI/DP,pcm=3 as /devices/
[ 11.310539] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[ 11.327037] input: HP Webcam as /devices/
[ 11.327131] usbcore: registered new interface driver uvcvideo
[ 11.824488] cfg80211: World regulatory domain updated:
[ 11.824494] cfg80211: DFS Master region: unset
[ 11.824496] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.824499] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 11.824502] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 11.824505] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 11.824508] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 11.824510] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 13.995193] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.869287] r8169 0000:03:00.0 eth0: link down
[ 22.869301] r8169 0000:03:00.0 eth0: link down
[ 24.549116] r8169 0000:03:00.0 eth0: link up
[ 40.484050] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 40.661115] usb 4-2: New USB device found, idVendor=046d, idProduct=c52f
[ 40.661119] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 40.661122] usb 4-2: Product: USB Receiver
[ 40.661124] usb 4-2: Manufacturer: Logitech
[ 40.748433] usbcore: registered new interface driver usbhid
[ 40.748436] usbhid: USB HID core driver
[ 40.761860] input: Logitech USB Receiver as /devices/
[ 40.816201] hid-generic 0003:046D:
[ 40.820406] input: Logitech USB Receiver as /devices/
[ 40.876590] hid-generic 0003:046D:
[ 95.608038] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 96.132025] usb 7-2: device not accepting address 2, error -71
Release Date: 11/14/2008
Manufacturer: Hewlett-Packard
Product Name: HP Pavilion dv6 Notebook PC
Serial Number: CNF914070J
Manufacturer: Quanta
Product Name: 3627
Serial Number: CNF914070J
Manufacturer: Quanta
Serial Number: None
Manufacturer: Intel(R) Corporation
Serial Number: Not Specified
Manufacturer: 7F7FFE0000000000
Serial Number: 24070D23
Manufacturer: 7F7FFE0000000000
Serial Number: 24070E91
eth0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:off/any
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
lo no wireless extensions.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
WimaxEnabled=true
sudo: hwinfo: command not found
root 639 0.0 0.4 392172 16196 ? Ssl 12:51 0:00 /usr/sbin/
root 767 0.0 0.2 23464 10272 ? S 12:51 0:00 /sbin/dhclient -d -q -sf /usr/lib/
nobody 798 0.0 0.0 40288 3544 ? S 12:51 0:00 /usr/sbin/dnsmasq --no-resolv --keep-
chastain 2076 0.0 0.0 13692 2240 pts/5 S+ 13:03 0:00 grep --color=auto -E wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.1.1
total 64012
8650753 drwxr-xr-x 3 root root 4096 Jul 3 23:42 .
2 drwxr-xr-x 23 root root 4096 Jul 3 07:09 ..
8650756 -rw-r--r-- 1 root root 1268815 Apr 16 17:45 abi-3.19.
8650766 -rw-r--r-- 1 root root 1269462 Jun 14 12:44 abi-3.19.
8650757 -rw-r--r-- 1 root root 177656 Apr 16 17:45 config-
8651046 -rw-r--r-- 1 root root 177700 Jun 14 12:44 config-
8650754 drwxr-xr-x 5 root root 4096 Jul 3 07:11 grub
8651049 -rw-r--r-- 1 root root 20827948 Jul 3 07:05 initrd.
8651050 -rw-r--r-- 1 root root 20830975 Jul 3 23:42 initrd.
8650758 -rw-r--r-- 1 root root 164216 Mar 6 08:23 memtest86+.bin
8650759 -rw-r--r-- 1 root root 165892 Mar 6 08:23 memtest86+.elf
8650760 -rw-r--r-- 1 root root 166396 Mar 6 08:23 memtest86+
8650755 -rw------- 1 root root 3615358 Apr 16 17:45 System.
8651047 -rw------- 1 root root 3617303 Jun 14 12:44 System.
8650763 -rw-r--r-- 1 root root 6611584 Jul 3 06:42 vmlinuz-
8651048 -rw------- 1 root root 6617408 Jun 14 12:44 vmlinuz-
Support status summary of 'HP-Pavilion-
You have 1812 packages (95.0%) supported until January 2016 (9m)
You have 4 packages (0.2%) supported until April 2016 (9m)
You have 0 packages (0.0%) that can not/no-longer be downloaded
You have 92 packages (4.8%) that are unsupported
Run with --show-unsupported, --show-supported or --show-all to see more details
Downloaded daily snapshot dated 2015-07-04 03:15:01
--2015-07-06 13:03:43-- http://
Resolving www.linux-usb.org (www.linux-
Connecting to www.linux-usb.org (www.linux-
HTTP request sent, awaiting response... 200 OK
Length: 549341 (536K) [text/plain]
Saving to: ‘/var/lib/
/var/lib/usbutils/u 100%[==
2015-07-06 13:03:46 (1.09 MB/s) - ‘/var/lib/
Done.
Module Size Used by
hid_generic 16384 0
usbhid 53248 0
hid 110592 3 hid_generic,usbhid
uvcvideo 90112 0
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_core 49152 1 uvcvideo
v4l2_common 16384 1 videobuf2_core
videodev 159744 3 uvcvideo,
snd_hda_codec_hdmi 53248 2
media 24576 2 uvcvideo,videodev
gpio_ich 16384 0
snd_hda_codec_idt 65536 1
hp_wmi 16384 0
sparse_keymap 16384 1 hp_wmi
snd_hda_
i915 1052672 3
snd_hda_intel 32768 3
snd_hda_controller 32768 1 snd_hda_intel
snd_hda_codec 143360 5 snd_hda_
snd_hwdep 20480 1 snd_hda_codec
wl 6369280 0
drm_kms_helper 122880 1 i915
cfg80211 540672 1 wl
snd_pcm 106496 4 snd_hda_
joydev 20480 0
snd_seq_midi 16384 0
drm 344064 5 i915,drm_kms_helper
snd_seq_midi_event 16384 1 snd_seq_midi
coretemp 16384 0
serio_raw 16384 0
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_
lpc_ich 24576 0
i2c_algo_bit 16384 1 i915
hp_accel 28672 0
wmi 20480 1 hp_wmi
lis3lv02d 20480 1 hp_accel
snd_seq_device 16384 3 snd_seq,
snd_timer 32768 2 snd_pcm,snd_seq
ir_lirc_codec 16384 0
ir_sanyo_decoder 16384 0
ir_jvc_decoder 16384 0
lirc_dev 20480 1 ir_lirc_codec
ir_mce_kbd_decoder 16384 0
ir_xmp_decoder 16384 0
ir_nec_decoder 16384 0
ir_sharp_decoder 16384 0
ir_rc6_decoder 16384 0
ir_sony_decoder 16384 0
ir_rc5_decoder 16384 0
snd 90112 17 snd_hwdep,
rc_rc6_mce 16384 0
soundcore 16384 2 snd,snd_hda_codec
input_polldev 16384 1 lis3lv02d
ene_ir 24576 0
rc_core 28672 14 ir_sharp_
video 20480 1 i915
shpchp 40960 0
mac_hid 16384 0
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 45056 3 lp,ppdev,parport_pc
autofs4 40960 2
ums_realtek 20480 0
uas 24576 0
usb_storage 69632 2 uas,ums_realtek
ahci 36864 2
psmouse 118784 0
libahci 32768 1 ahci
r8169 81920 0
mii 16384 1 r8169
this a new install with updates on
HP Pavilion dv6-1030us Entertainment Notebook PC
Intel core2duo CPU t6400@2GHzx2
64 bit os
4gig ram
The problem is still with the default driver installed with Ubuntu15.04 will not allow me to turn on the WiFi .when I go into system settings/
the system shows it as BCM4322 802.11a/b/g/n Wireless LAN Controller
it is acutely 44322 AG 802.11a/b/g/draft-n WiFi Adapter
from the Broadcom web site I was able to down load the following driver but have been unable to install it.
hybrid-
let me know If you need more info and thanks for the help.
Kevin
Revision history for this message
|
#5 |
Your Terminal output shows the following issue:
Soft blocked: no
Hard blocked: no
1: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: yes
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
=======
So your wireless card is disabled by a hardware switch, a
special key combination (Fn-F2, etc...), by incorrect BIOS settings for
wireless, or a combination of these factors...
There might also be a BIOS option that allows you to have the wireless
functionality controlled "By application"
Search for the "by application" option in the BIOS and select it (if
possible)....
In the BIOS, verify that wireless is enabled.
Then, in the BIOS, perform a factory reset (in the BIOS).
Hopefully, this will enable the wireless again.
Also run the following 2 Terminal commands to try to change the rfkill
state of your wireless chipset:
rfkill unblock all
sudo rfkill unblock all
Then retest wireless.
If that does not help, then I suggest blacklisting the hp_wmi kernel
module.
First run this command:
sudo gedit /etc/modprobe.
Using the gedit editor, scroll down and add the following configuration
line:
blacklist hp_wmi
Using the gedit editor, save the change to the /etc/modprobe.
file.
Then REBOOT your PC and retest wireless.
Revision history for this message
|
#6 |
problem was switch in bios but the switch was not assessable from bios menu.
thank you for your help
Kevin