Ubuntu

The DVD player in laptop Acer aspire 5740 doesn't read in Ubuntu 14.04

Asked by Triyambakesh Mohanty

Non of the CDs & DVDs are readable in Acer Aspire 5740 installed with Ubuntu 14.04 LTS. This was also an issue when 12.04 LTS was used. After inserting the CD/ DVD, the dialog window box of 'Blank CD-R Disk' 'CD/ DVD creator folder' opens with a message box- "unable to mount blank CD-R disk (location is already mounted)" is displayed separately. I am unable to play any CD/ DVD since LTS 12.04 was updated from Maverick Meerkat. Now its 14.04. Please resolve this problem.

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
Manfred Hampl
Solved:
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#1

With a disk in the drive please run:

sudo lshw -C drive; mount; lsb_release -a; uname -a

Please post your output on:
https://answers.launchpad.net/ubuntu/+question/253182

Thanks

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#2

/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=triyambakesh)
LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch:core-4.1-ia32:core-4.1-noarch:security-4.0-ia32:security-4.0-noarch:security-4.1-ia32:security-4.1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 14.04.1 LTS
Release: 14.04
Codename: trusty
Linux triyambakesh-laptop 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:49:09 UTC 2014 i686 i686 i686 GNU/Linux

Revision history for this message
Launchpad Janitor (janitor) said : 		#3

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#4

I did not get any reply to my question and I am still waiting for the answer

Revision history for this message
Launchpad Janitor (janitor) said : 		#5

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#6

/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=triyambakesh)
LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch:core-4.1-ia32:core-4.1-noarch:security-4.0-ia32:security-4.0-noarch:security-4.1-ia32:security-4.1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 14.04.1 LTS
Release: 14.04
Codename: trusty
Linux triyambakesh-laptop 3.13.0-45-generic #74-Ubuntu SMP Tue Jan 13 19:37:48 UTC 2015 i686 i686 i686 GNU/Linux

Revision history for this message
Manfred Hampl (m-hampl) said : 		#7

Please add the output of

sudo lshw -class disk

You write that even for a CD with files on it you get a message 'blank CD'?

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#8

The output is as follows-

  *-disk
       description: ATA Disk
       product: WDC WD3200BEVT-2
       vendor: Western Digital
       physical id: 0.0.0
       bus info: scsi@0:0.0.0
       logical name: /dev/sda
       version: 01.0
       serial: WD-WX81A10P5165
       size: 298GiB (320GB)
       capabilities: partitioned partitioned:dos
       configuration: ansiversion=5 sectorsize=512 signature=00001155
  *-cdrom
       description: DVD-RAM writer
       product: DVDRAM GT31N
       vendor: HL-DT-ST
       physical id: 0.0.0
       bus info: scsi@4:0.0.0
       logical name: /dev/cdrom
       logical name: /dev/sr0
       version: 1.00
       capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
       configuration: ansiversion=5 status=nodisc
  *-cdrom
       description: SCSI CD-ROM
       product: Mass Storage
       vendor: HUAWEI
       physical id: 0
       bus info: scsi@58:0.0.0
       logical name: /dev/cdrom1
       logical name: /dev/sr1
       version: 2.31
       capabilities: removable audio
       configuration: ansiversion=2 status=ready
     *-medium
          physical id: 0
          logical name: /dev/cdrom1
          capabilities: partitioned partitioned:mac
  *-disk
       description: SCSI Disk
       physical id: 1
       bus info: scsi@59:0.0.0
       logical name: /dev/sdb
       configuration: sectorsize=512

Now I have tried with some CDs and DVDs. The ROM makes noise... It starts and runs for sometimes and then stops. Keeps repeating for 5 mins and then fully silent. But on Screen I cannot see any dialogue opening after inserting CD/ DVD. The CD/ DVD has data within it. Earlier I posted it was showing Blank CD when I gave CDs containing files.

Revision history for this message
Manfred Hampl (m-hampl) said : 		#9

Your output shows two devices for CD/DVD. If you try the other one, do you see the same problem?

Another test: Can you please do the following:
Issue the terminal command "dmesg" and note down the time code of the last line that you see in the output.
Insert a CD (or DVD) into the drive, wait half a minute, and re-issue the command "dmesg".
Please copy/paste all lines that have been added since the first execution into this question document. (Use the time code that you have noted to identify the new lines.)

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#10

Dear Manfred,

Thanks for your insight. Well I would like to clarify one thing. The 2nd disk you are seeing in the output of running command sudo lshw -class disk is of Huawei Modem that I am using for accessing the Net. Please note that after running the command without CD & DVD gives the output (Status- Nodisk):-

triyambakesh@triyambakesh-laptop:~$ sudo lshw -class disk
[sudo] password for triyambakesh:
  *-disk
       description: ATA Disk
       product: WDC WD3200BEVT-2
       vendor: Western Digital
       physical id: 0.0.0
       bus info: scsi@0:0.0.0
       logical name: /dev/sda
       version: 01.0
       serial: WD-WX81A10P5165
       size: 298GiB (320GB)
       capabilities: partitioned partitioned:dos
       configuration: ansiversion=5 sectorsize=512 signature=00001155
  *-cdrom
       description: DVD-RAM writer
       product: DVDRAM GT31N
       vendor: HL-DT-ST
       physical id: 0.0.0
       bus info: scsi@4:0.0.0
       logical name: /dev/cdrom
       logical name: /dev/sr0
       version: 1.00
       capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
       configuration: ansiversion=5 status=nodisc

And WITH CD & DVD GIVES OUTPUT (Status- Busy) for 1 minute:-

*-disk
       description: ATA Disk
       product: WDC WD3200BEVT-2
       vendor: Western Digital
       physical id: 0.0.0
       bus info: scsi@0:0.0.0
       logical name: /dev/sda
       version: 01.0
       serial: WD-WX81A10P5165
       size: 298GiB (320GB)
       capabilities: partitioned partitioned:dos
       configuration: ansiversion=5 sectorsize=512 signature=00001155
  *-cdrom
       description: DVD-RAM writer
       product: DVDRAM GT31N
       vendor: HL-DT-ST
       physical id: 0.0.0
       bus info: scsi@4:0.0.0
       logical name: /dev/cdrom
       logical name: /dev/sr0
       version: 1.00
       capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
       configuration: ansiversion=5 status=busy

After 1 min, with the CD & DVD inside, gives OUTPUT (Status- Nodisk):-

*-disk
       description: ATA Disk
       product: WDC WD3200BEVT-2
       vendor: Western Digital
       physical id: 0.0.0
       bus info: scsi@0:0.0.0
       logical name: /dev/sda
       version: 01.0
       serial: WD-WX81A10P5165
       size: 298GiB (320GB)
       capabilities: partitioned partitioned:dos
       configuration: ansiversion=5 sectorsize=512 signature=00001155
  *-cdrom
       description: DVD-RAM writer
       product: DVDRAM GT31N
       vendor: HL-DT-ST
       physical id: 0.0.0
       bus info: scsi@4:0.0.0
       logical name: /dev/cdrom
       logical name: /dev/sr0
       version: 1.00
       capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
       configuration: ansiversion=5 status=nodisc

This could help you with more in analyzing the issue. And the CD & DVD doesn't runs or opens even after waiting for 5 to 10 mins. I guess this replies to your 1st part of the question asked by you. The 2nd part follows in the next stanza.

Revision history for this message
Manfred Hampl (m-hampl) said : 		#11

If the DVD drives goes from status=busy to status=nodisc this looks more like a hardware issue.
Either the drive has a problem with that specific disc medium, or there is a hardware (or firmware) problem with the drive as such. Have you checked whether there is dirt on the reading head of the drive (if that is accessible)?

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#12

Dear Manfred,

I am pasting the output for the command "dmesg" without any CD/ DVD in drive:

[ 0.344450] Switched to clocksource hpet
[ 0.350528] AppArmor: AppArmor Filesystem Enabled
[ 0.350561] pnp: PnP ACPI init
[ 0.350576] ACPI: bus type PNP registered
[ 0.350641] pnp 00:00: [dma 4]
[ 0.350666] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.350691] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.350807] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.350836] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.350894] system 00:04: [io 0x0500-0x050f] has been reserved
[ 0.350896] system 00:04: [io 0xffff] has been reserved
[ 0.350898] system 00:04: [io 0xffff] has been reserved
[ 0.350901] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.350903] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.350905] system 00:04: [io 0xfe00] has been reserved
[ 0.350908] system 00:04: [mem 0xff800000-0xff800fff] has been reserved
[ 0.350911] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.350953] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.351019] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.351047] pnp 00:07: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[ 0.351388] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.351391] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.351393] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.351395] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.351398] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.351400] system 00:08: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.351402] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.351404] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.351406] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.351409] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.351411] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.351413] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.351533] pnp: PnP ACPI: found 9 devices
[ 0.351534] ACPI: bus type PNP unregistered
[ 0.351538] PnPBIOS: Disabled by ACPI PNP
[ 0.388033] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.388037] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.388049] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.388051] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.388057] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc000000-0xbc1fffff 64bit pref]
[ 0.388060] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.388063] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.388066] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.388071] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.388075] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.388080] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.388082] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.388087] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.388090] pci 0000:00:1c.1: bridge window [mem 0xbc000000-0xbc1fffff 64bit pref]
[ 0.388095] pci 0000:00:1e.0: PCI bridge to [bus 0f]
[ 0.388105] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.388107] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.388109] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.388111] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.388113] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.388114] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.388116] pci_bus 0000:00: resource 10 [mem 0xbc000000-0xfeafffff]
[ 0.388118] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.388120] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.388122] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.388124] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.388126] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.388128] pci_bus 0000:04: resource 2 [mem 0xbc000000-0xbc1fffff 64bit pref]
[ 0.388130] pci_bus 0000:0f: resource 4 [io 0x0000-0x0cf7]
[ 0.388131] pci_bus 0000:0f: resource 5 [io 0x0d00-0xffff]
[ 0.388133] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.388135] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.388137] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.388139] pci_bus 0000:0f: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.388140] pci_bus 0000:0f: resource 10 [mem 0xbc000000-0xfeafffff]
[ 0.388177] NET: Registered protocol family 2
[ 0.388384] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.388409] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.388446] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.388473] TCP: reno registered
[ 0.388476] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.388484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.388539] NET: Registered protocol family 1
[ 0.388551] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.389058] PCI: CLS 64 bytes, default 64
[ 0.389103] Trying to unpack rootfs image as initramfs...
[ 0.887588] Freeing initrd memory: 25836K (f4d7a000 - f66b5000)
[ 0.887712] Simple Boot Flag at 0x3e set to 0x1
[ 0.887924] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x8
[ 0.887929] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x8
[ 0.887934] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x8
[ 0.887939] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x8
[ 0.888011] microcode: Microcode Update Driver: v2.00 <email address hidden>, Peter Oruba
[ 0.888013] Scanning for low memory corruption every 60 seconds
[ 0.888307] Initialise system trusted keyring
[ 0.888350] audit: initializing netlink socket (disabled)
[ 0.888362] type=2000 audit(1423495162.768:1): initialized
[ 0.910023] bounce pool size: 64 pages
[ 0.910033] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.911216] zbud: loaded
[ 0.911286] VFS: Disk quotas dquot_6.5.2
[ 0.911332] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.911782] fuse init (API version 7.22)
[ 0.911865] msgmni has been set to 1702
[ 0.911928] Key type big_key registered
[ 0.912313] Key type asymmetric registered
[ 0.912315] Asymmetric key parser 'x509' registered
[ 0.912348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.912384] io scheduler noop registered
[ 0.912386] io scheduler deadline registered (default)
[ 0.912411] io scheduler cfq registered
[ 0.912853] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.912868] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.912908] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.912909] vesafb: scrolling: redraw
[ 0.912911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.913250] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k
[ 1.039625] Console: switching to colour frame buffer device 128x48
[ 1.165930] fb0: VESA VGA frame buffer device
[ 1.165950] intel_idle: MWAIT substates: 0x1120
[ 1.165951] intel_idle: v0.4 model 0x25
[ 1.165953] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.166065] ipmi message handler version 39.2
[ 1.167026] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.167082] ACPI: AC Adapter [ADP1] (on-line)
[ 1.167204] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.168211] ACPI: Lid Switch [LID0]
[ 1.168246] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.168250] ACPI: Sleep Button [SLPB]
[ 1.168280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.168282] ACPI: Power Button [PWRF]
[ 1.196791] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.196797] ACPI: Thermal Zone [TZS0] (63 C)
[ 1.209167] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.209172] ACPI: Thermal Zone [TZS1] (38 C)
[ 1.209213] GHES: HEST is not enabled!
[ 1.209331] isapnp: Scanning for PnP cards...
[ 1.209356] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.219994] Linux agpgart interface v0.103
[ 1.220068] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.220138] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.220872] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.221022] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.222499] brd: module loaded
[ 1.223259] loop: module loaded
[ 1.223643] libphy: Fixed MDIO Bus: probed
[ 1.223727] tun: Universal TUN/TAP device driver, 1.6
[ 1.223728] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 1.223767] PPP generic driver version 2.4.2
[ 1.223810] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.223815] ehci-pci: EHCI PCI platform driver
[ 1.228474] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.228482] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.228495] ehci-pci 0000:00:1a.0: debug port 2
[ 1.232480] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.232500] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0806000
[ 1.240696] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.240755] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240757] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240759] usb usb1: Product: EHCI Host Controller
[ 1.240761] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 1.240763] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.240894] hub 1-0:1.0: USB hub found
[ 1.240901] hub 1-0:1.0: 3 ports detected
[ 1.241644] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.241650] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.241661] ehci-pci 0000:00:1d.0: debug port 2
[ 1.245642] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.245657] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0807000
[ 1.256702] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.256757] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.256760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.256762] usb usb2: Product: EHCI Host Controller
[ 1.256764] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 1.256765] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.256880] hub 2-0:1.0: USB hub found
[ 1.256886] hub 2-0:1.0: 3 ports detected
[ 1.256983] ehci-platform: EHCI generic platform driver
[ 1.256991] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.256992] ohci-pci: OHCI PCI platform driver
[ 1.257002] ohci-platform: OHCI generic platform driver
[ 1.257008] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.257067] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.282388] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.282398] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.282622] mousedev: PS/2 mouse device common for all mice
[ 1.283408] rtc_cmos 00:05: RTC can wake from S4
[ 1.283582] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.283615] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.283744] device-mapper: uevent: version 1.0.3
[ 1.283886] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: <email address hidden>
[ 1.283921] platform eisa.0: Probing EISA bus 0
[ 1.283926] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.283930] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.283933] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.283937] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.283940] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.283944] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.283947] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.283951] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.283954] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.283958] platform eisa.0: EISA: Detected 0 cards
[ 1.283967] cpufreq-nforce2: No nForce2 chipset.
[ 1.283973] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.284212] TCP: cubic registered
[ 1.284404] NET: Registered protocol family 10
[ 1.284773] NET: Registered protocol family 17
[ 1.284794] Key type dns_resolver registered
[ 1.285224] Using IPI No-Shortcut mode
[ 1.285428] Loading compiled-in X.509 certificates
[ 1.292354] Loaded X.509 cert 'Magrathea: Glacier signing key: 3689bf48af502cbafe71e5c25d6c55340b7f13ff'
[ 1.292382] registered taskstats version 1
[ 1.296298] Key type trusted registered
[ 1.299740] Key type encrypted registered
[ 1.303133] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.303139] IMA: No TPM chip found, activating TPM-bypass!
[ 1.303516] regulator-dummy: disabling
[ 1.303591] Magic number: 3:512:335
[ 1.303625] tty tty56: hash matches
[ 1.303714] rtc_cmos 00:05: setting system clock to 2015-02-09 15:19:24 UTC (1423495164)
[ 1.304865] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.304866] EDD information not available.
[ 1.304923] PM: Hibernation image not present or could not be loaded.
[ 1.316293] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.379694] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.379701] ACPI: Battery Slot [BAT0] (battery present)
[ 1.527716] isapnp: No Plug & Play device found
[ 1.528207] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[ 1.528284] Write protecting the kernel text: 6552k
[ 1.528369] Write protecting the kernel read-only data: 2768k
[ 1.528371] NX-protecting the kernel data: 5736k
[ 1.546429] systemd-udevd[109]: starting version 204
[ 1.552813] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.574696] drm: module verification failed: signature and/or required key missing - tainting kernel
[ 1.576286] [drm] Initialized drm 1.1.0 20060810
[ 1.578312] wmi: Mapper loaded
[ 1.581545] pps_core: LinuxPPS API ver. 1 registered
[ 1.581548] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <email address hidden>
[ 1.587645] PTP clock support registered
[ 1.594632] [drm] Memory usable by graphics device = 2048M
[ 1.594638] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 1.594641] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.594661] Console: switching to colour dummy device 80x25
[ 1.598906] tg3.c:v3.134 (Sep 16, 2013)
[ 1.618509] libphy: tg3 mdio bus: probed
[ 1.620838] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.620853] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.620855] [drm] Driver supports precise vblank timestamp query.
[ 1.620933] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.628367] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:8c:49:af
[ 1.628370] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[ 1.628373] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.628375] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.659415] fbcon: inteldrmfb (fb0) is primary device
[ 1.685233] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.685236] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.685622] hub 1-1:1.0: USB hub found
[ 1.685849] hub 1-1:1.0: 6 ports detected
[ 1.796914] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.885024] tsc: Refined TSC clocksource calibration: 2260.984 MHz
[ 1.929262] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.929265] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.929527] hub 2-1:1.0: USB hub found
[ 1.929580] hub 2-1:1.0: 8 ports detected
[ 2.201064] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.331274] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b044
[ 2.331278] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.331280] usb 2-1.5: Product: Video WebCam
[ 2.331283] usb 2-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.331285] usb 2-1.5: SerialNumber: SN0001
[ 2.360993] Console: switching to colour frame buffer device 170x48
[ 2.365499] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.365501] i915 0000:00:02.0: registered panic notifier
[ 2.399031] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.399194] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 2.399393] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.399426] ahci 0000:00:1f.2: version 3.0
[ 2.399664] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.399709] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.412979] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.412988] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 2.437716] scsi0 : ahci
[ 2.438032] scsi1 : ahci
[ 2.438254] scsi2 : ahci
[ 2.438461] scsi3 : ahci
[ 2.438717] scsi4 : ahci
[ 2.438898] scsi5 : ahci
[ 2.438951] ata1: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808100 irq 41
[ 2.438955] ata2: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808180 irq 41
[ 2.438957] ata3: DUMMY
[ 2.438959] ata4: DUMMY
[ 2.438961] ata5: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808300 irq 41
[ 2.438964] ata6: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808380 irq 41
[ 2.632884] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
[ 2.690768] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.757079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.758374] ata1.00: ATA-8: WDC WD3200BEVT-22A23T0, 01.01A01, max UDMA/133
[ 2.758379] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.759822] ata1.00: configured for UDMA/133
[ 2.760174] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
[ 2.760349] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.760395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.760397] sd 0:0:0:0: [sda] Write Protect is off
[ 2.760399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.760419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.819728] sda: sda1 sda2 < sda5 >
[ 2.820681] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.885187] Switched to clocksource tsc
[ 3.077141] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.397213] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.399750] ata5.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100
[ 3.402755] ata5.00: configured for UDMA/100
[ 3.407889] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GT31N 1.00 PQ: 0 ANSI: 5
[ 3.411948] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.411953] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.412163] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.412361] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.729285] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.219114] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.145131] random: nonblocking pool is initialized
[ 21.551123] Adding 8279036k swap on /dev/sda5. Priority:-1 extents:1 across:8279036k FS
[ 22.112582] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.904037] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.836481] Bluetooth: Core ver 2.17
[ 23.836499] NET: Registered protocol family 31
[ 23.836500] Bluetooth: HCI device and connection manager initialized
[ 23.836509] Bluetooth: HCI socket layer initialized
[ 23.836511] Bluetooth: L2CAP socket layer initialized
[ 23.836515] Bluetooth: SCO socket layer initialized
[ 23.844945] Bluetooth: RFCOMM TTY layer initialized
[ 23.844956] Bluetooth: RFCOMM socket layer initialized
[ 23.844961] Bluetooth: RFCOMM ver 1.11
[ 23.845444] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.845447] Bluetooth: BNEP filters: protocol multicast
[ 23.845451] Bluetooth: BNEP socket layer initialized
[ 23.964301] type=1400 audit(1423495187.151:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=442 comm="apparmor_parser"
[ 23.964308] type=1400 audit(1423495187.151:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=442 comm="apparmor_parser"
[ 23.964792] type=1400 audit(1423495187.151:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=442 comm="apparmor_parser"
[ 24.072109] init: cups main process (453) killed by HUP signal
[ 24.072122] init: cups main process ended, respawning
[ 24.132634] systemd-udevd[463]: starting version 204
[ 24.172816] lp: driver loaded but no devices found
[ 24.184255] ppdev: user-space parallel port driver
[ 24.454567] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 24.454577] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454581] ACPI Warning: 0x000011c0-0x000011cf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 24.454585] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454587] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 24.454592] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454594] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 24.454598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454600] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 24.473842] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 24.477652] cfg80211: Calling CRDA to update world regulatory domain
[ 24.526229] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 24.555576] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 24.658533] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 24.714665] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 24.732482] type=1400 audit(1423495187.919:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
[ 24.732492] type=1400 audit(1423495187.919:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 24.732497] type=1400 audit(1423495187.919:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 24.733145] type=1400 audit(1423495187.919:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 24.733152] type=1400 audit(1423495187.919:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 24.733478] type=1400 audit(1423495187.919:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 24.742732] SKU: Nid=0x1d sku_cfg=0x40178d2d
[ 24.742736] SKU: port_connectivity=0x1
[ 24.742738] SKU: enable_pcbeep=0x1
[ 24.742739] SKU: check_sum=0x00000007
[ 24.742741] SKU: customization=0x0000008d
[ 24.742742] SKU: external_amp=0x5
[ 24.742743] SKU: platform_type=0x1
[ 24.742744] SKU: swap=0x0
[ 24.742745] SKU: override=0x1
[ 24.743013] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.743015] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.743017] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 24.743018] mono: mono_out=0x0
[ 24.743020] dig-out=0x1e/0x0
[ 24.743021] inputs:
[ 24.743023] Internal Mic=0x19
[ 24.743026] Mic=0x18
[ 24.743027] Line=0x1a
[ 24.743029] realtek: No valid SSID, checking pincfg 0x40178d2d for NID 0x1d
[ 24.743030] realtek: Enabling init ASM_ID=0x8d2d CODEC_ID=10ec0272
[ 24.783007] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 24.783011] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.783013] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.783014] mono: mono_out=0x0
[ 24.783016] inputs:
[ 24.799985] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 24.800860] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 24.801711] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 24.802706] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 24.980644] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 24.990767] acer_wmi: Function bitmap for Communication Device: 0x98
[ 25.010236] ath: EEPROM regdomain: 0x65
[ 25.010241] ath: EEPROM indicates we should expect a direct regpair map
[ 25.010245] ath: Country alpha2 being used: 00
[ 25.010246] ath: Regpair used: 0x65
[ 25.023480] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 25.024218] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8740000, irq=17
[ 25.035250] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.045567] acer_wmi: Disabling ACPI video driver
[ 25.064702] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 25.093672] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[ 25.107912] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 25.138825] init: failsafe main process (624) killed by TERM signal
[ 25.238952] Linux video capture interface: v2.00
[ 25.258020] uvcvideo: Found UVC 1.00 device Video WebCam (04f2:b044)
[ 25.284993] cfg80211: World regulatory domain updated:
[ 25.284997] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.284999] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.285000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.285002] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.285003] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.285005] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.314720] input: Video WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12
[ 25.314877] usbcore: registered new interface driver uvcvideo
[ 25.314882] USB Video Class driver (1.1.1)
[ 25.574205] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 25.670360] usb 1-1.4: New USB device found, idVendor=0489, idProduct=e011
[ 25.670367] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 25.670371] usb 1-1.4: Product: Acer Module
[ 25.670375] usb 1-1.4: Manufacturer: Broadcom Corp
[ 25.670378] usb 1-1.4: SerialNumber: 506313E6F715
[ 25.680847] usbcore: registered new interface driver btusb
[ 26.378690] type=1400 audit(1423495189.567:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=893 comm="apparmor_parser"
[ 30.105323] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 30.109125] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[ 30.116233] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.116873] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.119955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.300764] audit_printk_skb: 162 callbacks suppressed
[ 30.300769] type=1400 audit(1423495193.487:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1156 comm="apparmor_parser"
[ 30.311530] init: teamviewerd main process (1017) killed by TERM signal
[ 30.317002] init: gdm main process (1095) killed by TERM signal
[ 30.632402] tg3 0000:02:00.0 eth0: Link is down
[ 31.108300] init: samba-ad-dc main process (944) terminated with status 1
[ 39.762156] Non-volatile memory driver v1.3
[ 42.166588] init: plymouth-upstart-bridge main process ended, respawning
[ 42.174488] init: plymouth-upstart-bridge main process (1641) terminated with status 1
[ 42.174504] init: plymouth-upstart-bridge main process ended, respawning
[ 54.079867] type=1400 audit(1423495217.259:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1997 comm="apparmor_parser"
[ 54.079876] type=1400 audit(1423495217.259:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1997 comm="apparmor_parser"
[ 54.080502] type=1400 audit(1423495217.263:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1997 comm="apparmor_parser"
[ 114.105148] usb 1-1.4: USB disconnect, device number 3
[ 131.937788] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[ 132.032299] usb 2-1.3: New USB device found, idVendor=12d1, idProduct=1446
[ 132.032306] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 132.032311] usb 2-1.3: Product: HUAWEI Mobile
[ 132.032314] usb 2-1.3: Manufacturer: HUAWEI Technology
[ 132.118154] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 132.118236] scsi6 : usb-storage 2-1.3:1.0
[ 132.118367] usb-storage 2-1.3:1.1: USB Mass Storage device detected
[ 132.118439] scsi7 : usb-storage 2-1.3:1.1
[ 132.118515] usbcore: registered new interface driver usb-storage
[ 133.119366] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 133.119784] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 133.122008] sr1: scsi-1 drive
[ 133.122268] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 133.122425] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 133.123892] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 133.127596] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 133.156820] systemd-udevd[2739]: NAME="hwcdrom" ignored, kernel device nodes can not be renamed; please fix it in /etc/udev/rules.d/10-Huawei-Datacard.rules:11
[ 133.532002] usb 2-1.3: USB disconnect, device number 4
[ 137.318858] usb 2-1.3: new high-speed USB device number 5 using ehci-pci
[ 137.413605] usb 2-1.3: New USB device found, idVendor=12d1, idProduct=1436
[ 137.413610] usb 2-1.3: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 137.413613] usb 2-1.3: Product: HUAWEI Mobile
[ 137.413615] usb 2-1.3: Manufacturer: HUAWEI Technology
[ 137.416286] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 137.416457] usb-storage 2-1.3:1.1: USB Mass Storage device detected
[ 137.416552] usb-storage 2-1.3:1.2: USB Mass Storage device detected
[ 137.416648] usb-storage 2-1.3:1.3: USB Mass Storage device detected
[ 137.416743] usb-storage 2-1.3:1.4: USB Mass Storage device detected
[ 137.416837] usb-storage 2-1.3:1.5: USB Mass Storage device detected
[ 137.417216] scsi13 : usb-storage 2-1.3:1.5
[ 137.417336] usb-storage 2-1.3:1.6: USB Mass Storage device detected
[ 137.417587] scsi14 : usb-storage 2-1.3:1.6
[ 137.456048] usbcore: registered new interface driver usbserial
[ 137.456360] usbcore: registered new interface driver usbserial_generic
[ 137.457009] usbserial: USB Serial support registered for generic
[ 137.508490] usbcore: registered new interface driver option
[ 137.508898] usbserial: USB Serial support registered for GSM modem (1-port)
[ 137.509279] option 2-1.3:1.0: GSM modem (1-port) converter detected
[ 137.509458] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0
[ 137.509517] option 2-1.3:1.3: GSM modem (1-port) converter detected
[ 137.509654] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1
[ 137.509670] option 2-1.3:1.4: GSM modem (1-port) converter detected
[ 137.509803] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2
[ 137.523103] cdc_ether 2-1.3:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.0-1.3, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 137.523225] usbcore: registered new interface driver cdc_ether
[ 138.416346] scsi 13:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 138.416943] scsi 14:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 138.421093] sr1: scsi-1 drive
[ 138.422550] sr 13:0:0:0: Attached scsi CD-ROM sr1
[ 138.425446] sr 13:0:0:0: Attached scsi generic sg2 type 5
[ 138.426940] sd 14:0:0:0: Attached scsi generic sg3 type 0
[ 138.431348] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[ 162.485282] PPP BSD Compression module registered
[ 162.491404] PPP Deflate Compression module registered

---------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------
Followed by the output of the same command when run after 30 sec of inserting the disk in the player:

[ 0.888307] Initialise system trusted keyring
[ 0.888350] audit: initializing netlink socket (disabled)
[ 0.888362] type=2000 audit(1423495162.768:1): initialized
[ 0.910023] bounce pool size: 64 pages
[ 0.910033] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.911216] zbud: loaded
[ 0.911286] VFS: Disk quotas dquot_6.5.2
[ 0.911332] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.911782] fuse init (API version 7.22)
[ 0.911865] msgmni has been set to 1702
[ 0.911928] Key type big_key registered
[ 0.912313] Key type asymmetric registered
[ 0.912315] Asymmetric key parser 'x509' registered
[ 0.912348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.912384] io scheduler noop registered
[ 0.912386] io scheduler deadline registered (default)
[ 0.912411] io scheduler cfq registered
[ 0.912853] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.912868] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.912908] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.912909] vesafb: scrolling: redraw
[ 0.912911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.913250] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k
[ 1.039625] Console: switching to colour frame buffer device 128x48
[ 1.165930] fb0: VESA VGA frame buffer device
[ 1.165950] intel_idle: MWAIT substates: 0x1120
[ 1.165951] intel_idle: v0.4 model 0x25
[ 1.165953] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.166065] ipmi message handler version 39.2
[ 1.167026] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.167082] ACPI: AC Adapter [ADP1] (on-line)
[ 1.167204] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.168211] ACPI: Lid Switch [LID0]
[ 1.168246] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.168250] ACPI: Sleep Button [SLPB]
[ 1.168280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.168282] ACPI: Power Button [PWRF]
[ 1.196791] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.196797] ACPI: Thermal Zone [TZS0] (63 C)
[ 1.209167] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.209172] ACPI: Thermal Zone [TZS1] (38 C)
[ 1.209213] GHES: HEST is not enabled!
[ 1.209331] isapnp: Scanning for PnP cards...
[ 1.209356] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.219994] Linux agpgart interface v0.103
[ 1.220068] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.220138] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.220872] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.221022] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.222499] brd: module loaded
[ 1.223259] loop: module loaded
[ 1.223643] libphy: Fixed MDIO Bus: probed
[ 1.223727] tun: Universal TUN/TAP device driver, 1.6
[ 1.223728] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 1.223767] PPP generic driver version 2.4.2
[ 1.223810] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.223815] ehci-pci: EHCI PCI platform driver
[ 1.228474] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.228482] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.228495] ehci-pci 0000:00:1a.0: debug port 2
[ 1.232480] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.232500] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0806000
[ 1.240696] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.240755] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240757] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240759] usb usb1: Product: EHCI Host Controller
[ 1.240761] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 1.240763] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.240894] hub 1-0:1.0: USB hub found
[ 1.240901] hub 1-0:1.0: 3 ports detected
[ 1.241644] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.241650] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.241661] ehci-pci 0000:00:1d.0: debug port 2
[ 1.245642] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.245657] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0807000
[ 1.256702] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.256757] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.256760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.256762] usb usb2: Product: EHCI Host Controller
[ 1.256764] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 1.256765] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.256880] hub 2-0:1.0: USB hub found
[ 1.256886] hub 2-0:1.0: 3 ports detected
[ 1.256983] ehci-platform: EHCI generic platform driver
[ 1.256991] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.256992] ohci-pci: OHCI PCI platform driver
[ 1.257002] ohci-platform: OHCI generic platform driver
[ 1.257008] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.257067] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.282388] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.282398] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.282622] mousedev: PS/2 mouse device common for all mice
[ 1.283408] rtc_cmos 00:05: RTC can wake from S4
[ 1.283582] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.283615] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.283744] device-mapper: uevent: version 1.0.3
[ 1.283886] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: <email address hidden>
[ 1.283921] platform eisa.0: Probing EISA bus 0
[ 1.283926] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.283930] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.283933] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.283937] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.283940] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.283944] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.283947] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.283951] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.283954] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.283958] platform eisa.0: EISA: Detected 0 cards
[ 1.283967] cpufreq-nforce2: No nForce2 chipset.
[ 1.283973] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.284212] TCP: cubic registered
[ 1.284404] NET: Registered protocol family 10
[ 1.284773] NET: Registered protocol family 17
[ 1.284794] Key type dns_resolver registered
[ 1.285224] Using IPI No-Shortcut mode
[ 1.285428] Loading compiled-in X.509 certificates
[ 1.292354] Loaded X.509 cert 'Magrathea: Glacier signing key: 3689bf48af502cbafe71e5c25d6c55340b7f13ff'
[ 1.292382] registered taskstats version 1
[ 1.296298] Key type trusted registered
[ 1.299740] Key type encrypted registered
[ 1.303133] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.303139] IMA: No TPM chip found, activating TPM-bypass!
[ 1.303516] regulator-dummy: disabling
[ 1.303591] Magic number: 3:512:335
[ 1.303625] tty tty56: hash matches
[ 1.303714] rtc_cmos 00:05: setting system clock to 2015-02-09 15:19:24 UTC (1423495164)
[ 1.304865] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.304866] EDD information not available.
[ 1.304923] PM: Hibernation image not present or could not be loaded.
[ 1.316293] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.379694] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.379701] ACPI: Battery Slot [BAT0] (battery present)
[ 1.527716] isapnp: No Plug & Play device found
[ 1.528207] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[ 1.528284] Write protecting the kernel text: 6552k
[ 1.528369] Write protecting the kernel read-only data: 2768k
[ 1.528371] NX-protecting the kernel data: 5736k
[ 1.546429] systemd-udevd[109]: starting version 204
[ 1.552813] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.574696] drm: module verification failed: signature and/or required key missing - tainting kernel
[ 1.576286] [drm] Initialized drm 1.1.0 20060810
[ 1.578312] wmi: Mapper loaded
[ 1.581545] pps_core: LinuxPPS API ver. 1 registered
[ 1.581548] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <email address hidden>
[ 1.587645] PTP clock support registered
[ 1.594632] [drm] Memory usable by graphics device = 2048M
[ 1.594638] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 1.594641] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.594661] Console: switching to colour dummy device 80x25
[ 1.598906] tg3.c:v3.134 (Sep 16, 2013)
[ 1.618509] libphy: tg3 mdio bus: probed
[ 1.620838] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.620853] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.620855] [drm] Driver supports precise vblank timestamp query.
[ 1.620933] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.628367] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:8c:49:af
[ 1.628370] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[ 1.628373] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.628375] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.659415] fbcon: inteldrmfb (fb0) is primary device
[ 1.685233] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.685236] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.685622] hub 1-1:1.0: USB hub found
[ 1.685849] hub 1-1:1.0: 6 ports detected
[ 1.796914] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.885024] tsc: Refined TSC clocksource calibration: 2260.984 MHz
[ 1.929262] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.929265] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.929527] hub 2-1:1.0: USB hub found
[ 1.929580] hub 2-1:1.0: 8 ports detected
[ 2.201064] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.331274] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b044
[ 2.331278] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.331280] usb 2-1.5: Product: Video WebCam
[ 2.331283] usb 2-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.331285] usb 2-1.5: SerialNumber: SN0001
[ 2.360993] Console: switching to colour frame buffer device 170x48
[ 2.365499] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.365501] i915 0000:00:02.0: registered panic notifier
[ 2.399031] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.399194] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 2.399393] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.399426] ahci 0000:00:1f.2: version 3.0
[ 2.399664] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.399709] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.412979] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.412988] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 2.437716] scsi0 : ahci
[ 2.438032] scsi1 : ahci
[ 2.438254] scsi2 : ahci
[ 2.438461] scsi3 : ahci
[ 2.438717] scsi4 : ahci
[ 2.438898] scsi5 : ahci
[ 2.438951] ata1: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808100 irq 41
[ 2.438955] ata2: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808180 irq 41
[ 2.438957] ata3: DUMMY
[ 2.438959] ata4: DUMMY
[ 2.438961] ata5: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808300 irq 41
[ 2.438964] ata6: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808380 irq 41
[ 2.632884] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
[ 2.690768] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.757079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.758374] ata1.00: ATA-8: WDC WD3200BEVT-22A23T0, 01.01A01, max UDMA/133
[ 2.758379] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.759822] ata1.00: configured for UDMA/133
[ 2.760174] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
[ 2.760349] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.760395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.760397] sd 0:0:0:0: [sda] Write Protect is off
[ 2.760399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.760419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.819728] sda: sda1 sda2 < sda5 >
[ 2.820681] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.885187] Switched to clocksource tsc
[ 3.077141] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.397213] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.399750] ata5.00: ATAPI: HL-DT-STDVDRAM GT31N, 1.00, max UDMA/100
[ 3.402755] ata5.00: configured for UDMA/100
[ 3.407889] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GT31N 1.00 PQ: 0 ANSI: 5
[ 3.411948] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.411953] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.412163] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.412361] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.729285] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.219114] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.145131] random: nonblocking pool is initialized
[ 21.551123] Adding 8279036k swap on /dev/sda5. Priority:-1 extents:1 across:8279036k FS
[ 22.112582] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.904037] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.836481] Bluetooth: Core ver 2.17
[ 23.836499] NET: Registered protocol family 31
[ 23.836500] Bluetooth: HCI device and connection manager initialized
[ 23.836509] Bluetooth: HCI socket layer initialized
[ 23.836511] Bluetooth: L2CAP socket layer initialized
[ 23.836515] Bluetooth: SCO socket layer initialized
[ 23.844945] Bluetooth: RFCOMM TTY layer initialized
[ 23.844956] Bluetooth: RFCOMM socket layer initialized
[ 23.844961] Bluetooth: RFCOMM ver 1.11
[ 23.845444] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.845447] Bluetooth: BNEP filters: protocol multicast
[ 23.845451] Bluetooth: BNEP socket layer initialized
[ 23.964301] type=1400 audit(1423495187.151:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=442 comm="apparmor_parser"
[ 23.964308] type=1400 audit(1423495187.151:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=442 comm="apparmor_parser"
[ 23.964792] type=1400 audit(1423495187.151:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=442 comm="apparmor_parser"
[ 24.072109] init: cups main process (453) killed by HUP signal
[ 24.072122] init: cups main process ended, respawning
[ 24.132634] systemd-udevd[463]: starting version 204
[ 24.172816] lp: driver loaded but no devices found
[ 24.184255] ppdev: user-space parallel port driver
[ 24.454567] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 24.454577] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454581] ACPI Warning: 0x000011c0-0x000011cf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 24.454585] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454587] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 24.454592] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454594] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 24.454598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.454600] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 24.473842] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 24.477652] cfg80211: Calling CRDA to update world regulatory domain
[ 24.526229] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 24.555576] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 24.658533] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 24.714665] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 24.732482] type=1400 audit(1423495187.919:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
[ 24.732492] type=1400 audit(1423495187.919:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 24.732497] type=1400 audit(1423495187.919:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 24.733145] type=1400 audit(1423495187.919:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 24.733152] type=1400 audit(1423495187.919:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 24.733478] type=1400 audit(1423495187.919:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 24.742732] SKU: Nid=0x1d sku_cfg=0x40178d2d
[ 24.742736] SKU: port_connectivity=0x1
[ 24.742738] SKU: enable_pcbeep=0x1
[ 24.742739] SKU: check_sum=0x00000007
[ 24.742741] SKU: customization=0x0000008d
[ 24.742742] SKU: external_amp=0x5
[ 24.742743] SKU: platform_type=0x1
[ 24.742744] SKU: swap=0x0
[ 24.742745] SKU: override=0x1
[ 24.743013] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.743015] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.743017] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 24.743018] mono: mono_out=0x0
[ 24.743020] dig-out=0x1e/0x0
[ 24.743021] inputs:
[ 24.743023] Internal Mic=0x19
[ 24.743026] Mic=0x18
[ 24.743027] Line=0x1a
[ 24.743029] realtek: No valid SSID, checking pincfg 0x40178d2d for NID 0x1d
[ 24.743030] realtek: Enabling init ASM_ID=0x8d2d CODEC_ID=10ec0272
[ 24.783007] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 24.783011] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.783013] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.783014] mono: mono_out=0x0
[ 24.783016] inputs:
[ 24.799985] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 24.800860] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 24.801711] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 24.802706] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 24.980644] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 24.990767] acer_wmi: Function bitmap for Communication Device: 0x98
[ 25.010236] ath: EEPROM regdomain: 0x65
[ 25.010241] ath: EEPROM indicates we should expect a direct regpair map
[ 25.010245] ath: Country alpha2 being used: 00
[ 25.010246] ath: Regpair used: 0x65
[ 25.023480] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 25.024218] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8740000, irq=17
[ 25.035250] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.045567] acer_wmi: Disabling ACPI video driver
[ 25.064702] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 25.093672] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[ 25.107912] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 25.138825] init: failsafe main process (624) killed by TERM signal
[ 25.238952] Linux video capture interface: v2.00
[ 25.258020] uvcvideo: Found UVC 1.00 device Video WebCam (04f2:b044)
[ 25.284993] cfg80211: World regulatory domain updated:
[ 25.284997] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.284999] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.285000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.285002] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.285003] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.285005] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.314720] input: Video WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12
[ 25.314877] usbcore: registered new interface driver uvcvideo
[ 25.314882] USB Video Class driver (1.1.1)
[ 25.574205] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 25.670360] usb 1-1.4: New USB device found, idVendor=0489, idProduct=e011
[ 25.670367] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 25.670371] usb 1-1.4: Product: Acer Module
[ 25.670375] usb 1-1.4: Manufacturer: Broadcom Corp
[ 25.670378] usb 1-1.4: SerialNumber: 506313E6F715
[ 25.680847] usbcore: registered new interface driver btusb
[ 26.378690] type=1400 audit(1423495189.567:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=893 comm="apparmor_parser"
[ 30.105323] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 30.109125] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[ 30.116233] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.116873] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.119955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.300764] audit_printk_skb: 162 callbacks suppressed
[ 30.300769] type=1400 audit(1423495193.487:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1156 comm="apparmor_parser"
[ 30.311530] init: teamviewerd main process (1017) killed by TERM signal
[ 30.317002] init: gdm main process (1095) killed by TERM signal
[ 30.632402] tg3 0000:02:00.0 eth0: Link is down
[ 31.108300] init: samba-ad-dc main process (944) terminated with status 1
[ 39.762156] Non-volatile memory driver v1.3
[ 42.166588] init: plymouth-upstart-bridge main process ended, respawning
[ 42.174488] init: plymouth-upstart-bridge main process (1641) terminated with status 1
[ 42.174504] init: plymouth-upstart-bridge main process ended, respawning
[ 54.079867] type=1400 audit(1423495217.259:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1997 comm="apparmor_parser"
[ 54.079876] type=1400 audit(1423495217.259:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1997 comm="apparmor_parser"
[ 54.080502] type=1400 audit(1423495217.263:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1997 comm="apparmor_parser"
[ 114.105148] usb 1-1.4: USB disconnect, device number 3
[ 131.937788] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[ 132.032299] usb 2-1.3: New USB device found, idVendor=12d1, idProduct=1446
[ 132.032306] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 132.032311] usb 2-1.3: Product: HUAWEI Mobile
[ 132.032314] usb 2-1.3: Manufacturer: HUAWEI Technology
[ 132.118154] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 132.118236] scsi6 : usb-storage 2-1.3:1.0
[ 132.118367] usb-storage 2-1.3:1.1: USB Mass Storage device detected
[ 132.118439] scsi7 : usb-storage 2-1.3:1.1
[ 132.118515] usbcore: registered new interface driver usb-storage
[ 133.119366] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 133.119784] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 133.122008] sr1: scsi-1 drive
[ 133.122268] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 133.122425] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 133.123892] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 133.127596] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 133.156820] systemd-udevd[2739]: NAME="hwcdrom" ignored, kernel device nodes can not be renamed; please fix it in /etc/udev/rules.d/10-Huawei-Datacard.rules:11
[ 133.532002] usb 2-1.3: USB disconnect, device number 4
[ 137.318858] usb 2-1.3: new high-speed USB device number 5 using ehci-pci
[ 137.413605] usb 2-1.3: New USB device found, idVendor=12d1, idProduct=1436
[ 137.413610] usb 2-1.3: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 137.413613] usb 2-1.3: Product: HUAWEI Mobile
[ 137.413615] usb 2-1.3: Manufacturer: HUAWEI Technology
[ 137.416286] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 137.416457] usb-storage 2-1.3:1.1: USB Mass Storage device detected
[ 137.416552] usb-storage 2-1.3:1.2: USB Mass Storage device detected
[ 137.416648] usb-storage 2-1.3:1.3: USB Mass Storage device detected
[ 137.416743] usb-storage 2-1.3:1.4: USB Mass Storage device detected
[ 137.416837] usb-storage 2-1.3:1.5: USB Mass Storage device detected
[ 137.417216] scsi13 : usb-storage 2-1.3:1.5
[ 137.417336] usb-storage 2-1.3:1.6: USB Mass Storage device detected
[ 137.417587] scsi14 : usb-storage 2-1.3:1.6
[ 137.456048] usbcore: registered new interface driver usbserial
[ 137.456360] usbcore: registered new interface driver usbserial_generic
[ 137.457009] usbserial: USB Serial support registered for generic
[ 137.508490] usbcore: registered new interface driver option
[ 137.508898] usbserial: USB Serial support registered for GSM modem (1-port)
[ 137.509279] option 2-1.3:1.0: GSM modem (1-port) converter detected
[ 137.509458] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0
[ 137.509517] option 2-1.3:1.3: GSM modem (1-port) converter detected
[ 137.509654] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1
[ 137.509670] option 2-1.3:1.4: GSM modem (1-port) converter detected
[ 137.509803] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2
[ 137.523103] cdc_ether 2-1.3:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.0-1.3, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 137.523225] usbcore: registered new interface driver cdc_ether
[ 138.416346] scsi 13:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 138.416943] scsi 14:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 138.421093] sr1: scsi-1 drive
[ 138.422550] sr 13:0:0:0: Attached scsi CD-ROM sr1
[ 138.425446] sr 13:0:0:0: Attached scsi generic sg2 type 5
[ 138.426940] sd 14:0:0:0: Attached scsi generic sg3 type 0
[ 138.431348] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[ 162.485282] PPP BSD Compression module registered
[ 162.491404] PPP Deflate Compression module registered

Revision history for this message
Best Manfred Hampl (m-hampl) said : 		#13

I have to explain or correct one of my previous postings: The second CD-ROM device that I have seen in fact is your HUAWEI GSM modem that shows itself as if it is a CD-ROM to provide software to the system for installing (probably Windows only, maybe also Mac). Of course you cannot insert a CD into that device.

And your dmesg output does not show any additional lines when inserting a medium into the DVD drive. So it seems that there is a problem in the drive itself, that the drive cannot correctly identify the medium. See also my previous comment.

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#14

Thanks Manfred Hampl, that solved my question.

Revision history for this message
Triyambakesh Mohanty (triyambakesh) said : 		#15

Well Thanks Manfred for your detailed analysis. I would like to add one thing, I updated my OS from 12.04 to 14. 04 after which the CD drive stopped working. Is there any specific reason?
Well I also have a problem with Brightness control for the same Laptop. Long back I had Posted this issue. With the PPA Kamal Mostafa Screen Brightness control, I was doing fine with my Laptop. But As I updated it from 12.04 to 14.04, Brightness control failed. I am again opening the question, could you have a look on this issue Please. Thanks