SU(2)U(1)
Hi,
Im trying to work with Feynrules to create models and then to implement them into madgraph.
Im trying to work with just the SU(2)U(1) group of the standard model without the SU(3).
The problem is that when I try to generate a simple QED process with mad graph using this SU(2)U(1) model, I have the following error when I try to launch :
Command "generate_events run_01" interrupted with error:
IndexError : list index out of range
Please report this bug on https:/
More information is found in '/Users/
Please attach this file to your report.
Do Madgraph necessits an SU(3) color group in order to work?
Thank you in advance,
Best regards,
Mohammad
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Hi,
We certainly have a lot of constraint related to QCD since it is handle in a quite specific way (due to the running and the link to the PDF).
I'm not sure what are the exact requirement, but I guess that you need to have 'aS' and 'G' coupling defined in your UFO model.
After that you can have a model without any mention of the SU(3) group.
Now without the debug file, I do not know which specific problem you faced (and if this is even related to the SU(3) group)
Cheers,
olivier
> On 18 Oct 2017, at 13:23, Mohammad <email address hidden> wrote:
>
> New question #659612 on MadGraph5_aMC@NLO:
> https:/
>
> Hi,
> Im trying to work with Feynrules to create models and then to implement them into madgraph.
> Im trying to work with just the SU(2)U(1) group of the standard model without the SU(3).
> The problem is that when I try to generate a simple QED process with mad graph using this SU(2)U(1) model, I have the following error when I try to launch :
>
> Command "generate_events run_01" interrupted with error:
> IndexError : list index out of range
> Please report this bug on https:/
> More information is found in '/Users/
> Please attach this file to your report.
>
> Do Madgraph necessits an SU(3) color group in order to work?
>
> Thank you in advance,
> Best regards,
> Mohammad
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
Revision history for this message
|
#2 |
Hi,
Thank you for your fat response!
I already tried to add aS and G in my UFO model. However I still get the same error!
Cheers,
Mohammad
Revision history for this message
|
#3 |
Then please copy-past the content of your debug file (or upgrade this ticket to a bug report such that you can attach the debug file).
Cheers,
Olivier
> On 18 Oct 2017, at 14:08, Mohammad <email address hidden> wrote:
>
> Question #659612 on MadGraph5_aMC@NLO changed:
> https:/
>
> Status: Answered => Open
>
> Mohammad is still having a problem:
> Hi,
>
> Thank you for your fat response!
> I already tried to add aS and G in my UFO model. However I still get the same error!
>
> Cheers,
> Mohammad
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
Revision history for this message
|
#4 |
Hi,
Sorry for this late reply but I didn't received an email that you answered my question.
This is the content of my debug file:
#******
#* MadGraph5_
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.6.0 2017-08-16 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* *
#******
#* *
#* Command File for MadEvent *
#* *
#* run as ./bin/madevent.py filename *
#* *
#******
generate_events run_01
Traceback (most recent call last):
File "/Users/
return self.onecmd_
File "/Users/
return func(arg, **opt)
File "/Users/
postcmd=False)
File "/Users/
stop = Cmd.onecmd_
File "/Users/
return func(arg, **opt)
File "/Users/
self.
File "/Users/
self.
File "/Users/
run_
File "/Users/
if isinstance(
IndexError: list index out of range
automatic_
cluster_
#******
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.6.0 2017-08-16 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* *
#******
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#******
set group_subprocesses Auto
set ignore_
set loop_optimized_
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model SU(2)U(
generate e+ e- > mu+ mu-
output su2u1testtest
#######
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
#######
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
#######
#######
## INFORMATION FOR CKMBLOCK
#######
Block ckmblock
1 2.277360e-01 # cabi
#######
## INFORMATION FOR MASS
#######
Block mass
1 5.040000e-03 # MD
2 2.550000e-03 # MU
3 1.010000e-01 # MS
4 1.270000e+00 # MC
5 4.700000e+00 # MB
6 1.720000e+02 # MT
11 5.110000e-04 # Me
13 1.056600e-01 # MMU
15 1.777000e+00 # MTA
23 9.118760e+01 # MZ
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
12 0.000000 # ve : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
22 0.000000 # a : 0.0
24 79.824360 # w+ : cmath.sqrt(
#######
## INFORMATION FOR SMINPUTS
#######
Block sminputs
1 1.279000e+02 # aEWM1
2 1.166370e-05 # Gf
3 1.184000e-01 # aS
#######
## INFORMATION FOR DECAY
#######
DECAY 6 1.508336e+00 # WT
DECAY 23 2.495200e+00 # WZ
DECAY 24 2.085000e+00 # WW
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 22 0.000000 # a : 0.0
#******
# MadGraph5_aMC@NLO *
# *
# run_card.dat MadEvent *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/
# *
# Lines starting with a '# ' are info or comments *
# *
# mind the format: value = variable ! comment *
#******
#
#******
# Running parameters
#******
#
#******
# Tag name for the run (one word) *
#******
tag_1 = run_tag ! name of the run
#******
# Number of events and rnd seed *
# Warning: Do not generate more than 1M events in a single run *
# If you want to run Pythia, avoid more than 50k events in a run. *
#******
10000 = nevents ! Number of unweighted events requested
0 = iseed ! rnd seed (0=assigned automatically=
#******
# Collider type and energy *
# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton, *
# 3=photon from electron *
#******
0 = lpp1 ! beam 1 type
0 = lpp2 ! beam 2 type
500.0 = ebeam1 ! beam 1 total energy in GeV
500.0 = ebeam2 ! beam 2 total energy in GeV
#******
# Beam polarization from -100 (left-handed) to 100 (right-handed) *
#******
0.0 = polbeam1 ! beam polarization for beam 1
0.0 = polbeam2 ! beam polarization for beam 2
#******
# PDF CHOICE: this automatically fixes also alpha_s and its evol. *
#******
nn23lo1 = pdlabel ! PDF set
230000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#******
# Renormalization and factorization scales *
#******
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
91.188 = scale ! fixed ren scale
91.188 = dsqrt_q2fact1 ! fixed fact scale for pdf1
91.188 = dsqrt_q2fact2 ! fixed fact scale for pdf2
-1 = dynamical_
1.0 = scalefact ! scale factor for event-by-event scales
#******
# Type and output format
#******
False = gridpack !True = setting up the grid pack
-1.0 = time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
3.0 = lhe_version ! Change the way clustering information pass to shower.
True = clusinfo ! include clustering tag in output
average = event_norm ! average/sum. Normalization of the weight in the LHEF
#******
# Matching parameter (MLM only)
#******
0 = ickkw ! 0 no matching, 1 MLM
1.0 = alpsfact ! scale factor for QCD emission vx
False = chcluster ! cluster only according to channel diag
5 = asrwgtflavor ! highest quark flavor for a_s reweight
False = auto_ptj_mjj ! Automatic setting of ptj and mjj if xqcut >0
0.0 = xqcut ! minimum kt jet measure between partons
#******
#
#******
# handling of the helicities:
# 0: sum over all helicities
# 1: importance sampling over helicities
#******
0 = nhel ! using helicities importance sampling or not.
#******
# Generation bias, check the wiki page below for more information: *
# 'cp3.irmp.
#******
None = bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
{} = bias_parameters ! Specifies the parameters of the module.
#
#******
# Parton level cuts definition *
#******
#
#
#******
# BW cutoff (M+/-bwcutoff*
#******
15.0 = bwcutoff ! (M+/-bwcutoff*
#******
# Apply pt/E/eta/
# (note that etmiss/
#******
False = cut_decays ! Cut decay products
#******
# Standard Cuts *
#******
# Minimum and maximum pt's (for max, -1 means no cut) *
#******
20.0 = ptj ! minimum pt for the jets
0.0 = ptb ! minimum pt for the b
10.0 = pta ! minimum pt for the photons
10.0 = ptl ! minimum pt for the charged leptons
0.0 = misset ! minimum missing Et (sum of neutrino's momenta)
-1.0 = ptjmax ! maximum pt for the jets
-1.0 = ptbmax ! maximum pt for the b
-1.0 = ptamax ! maximum pt for the photons
-1.0 = ptlmax ! maximum pt for the charged leptons
-1.0 = missetmax ! maximum missing Et (sum of neutrino's momenta)
#******
# Minimum and maximum E's (in the center of mass frame) *
#******
0.0 = ej ! minimum E for the jets
0.0 = eb ! minimum E for the b
0.0 = ea ! minimum E for the photons
0.0 = el ! minimum E for the charged leptons
-1.0 = ejmax ! maximum E for the jets
-1.0 = ebmax ! maximum E for the b
-1.0 = eamax ! maximum E for the photons
-1.0 = elmax ! maximum E for the charged leptons
#******
# Maximum and minimum absolute rapidity (for max, -1 means no cut) *
#******
5.0 = etaj ! max rap for the jets
-1.0 = etab ! max rap for the b
2.5 = etaa ! max rap for the photons
2.5 = etal ! max rap for the charged leptons
0.0 = etajmin ! min rap for the jets
0.0 = etabmin ! min rap for the b
0.0 = etaamin ! min rap for the photons
0.0 = etalmin ! main rap for the charged leptons
#******
# Minimum and maximum DeltaR distance *
#******
0.4 = drjj ! min distance between jets
0.0 = drbb ! min distance between b's
0.4 = drll ! min distance between leptons
0.4 = draa ! min distance between gammas
0.0 = drbj ! min distance between b and jet
0.4 = draj ! min distance between gamma and jet
0.4 = drjl ! min distance between jet and lepton
0.0 = drab ! min distance between gamma and b
0.0 = drbl ! min distance between b and lepton
0.4 = dral ! min distance between gamma and lepton
-1.0 = drjjmax ! max distance between jets
-1.0 = drbbmax ! max distance between b's
-1.0 = drllmax ! max distance between leptons
-1.0 = draamax ! max distance between gammas
-1.0 = drbjmax ! max distance between b and jet
-1.0 = drajmax ! max distance between gamma and jet
-1.0 = drjlmax ! max distance between jet and lepton
-1.0 = drabmax ! max distance between gamma and b
-1.0 = drblmax ! max distance between b and lepton
-1.0 = dralmax ! maxdistance between gamma and lepton
#******
# Minimum and maximum invariant mass for pairs *
# WARNING: for four lepton final state mmll cut require to have *
# different lepton masses for each flavor! *
#******
0.0 = mmjj ! min invariant mass of a jet pair
0.0 = mmbb ! min invariant mass of a b pair
0.0 = mmaa ! min invariant mass of gamma gamma pair
0.0 = mmll ! min invariant mass of l+l- (same flavour) lepton pair
-1.0 = mmjjmax ! max invariant mass of a jet pair
-1.0 = mmbbmax ! max invariant mass of a b pair
-1.0 = mmaamax ! max invariant mass of gamma gamma pair
-1.0 = mmllmax ! max invariant mass of l+l- (same flavour) lepton pair
#******
# Minimum and maximum invariant mass for all letpons *
#******
0.0 = mmnl ! min invariant mass for all letpons (l+- and vl)
-1.0 = mmnlmax ! max invariant mass for all letpons (l+- and vl)
#******
# Minimum and maximum pt for 4-momenta sum of leptons *
#******
0.0 = ptllmin ! Minimum pt for 4-momenta sum of leptons(l and vl)
-1.0 = ptllmax ! Maximum pt for 4-momenta sum of leptons(l and vl)
#******
# Inclusive cuts *
#******
0.0 = ptheavy ! minimum pt for at least one heavy final state
0.0 = xptj ! minimum pt for at least one jet
0.0 = xptb ! minimum pt for at least one b
0.0 = xpta ! minimum pt for at least one photon
0.0 = xptl ! minimum pt for at least one charged lepton
#******
# Control the pt's of the jets sorted by pt *
#******
0.0 = ptj1min ! minimum pt for the leading jet in pt
0.0 = ptj2min ! minimum pt for the second jet in pt
0.0 = ptj3min ! minimum pt for the third jet in pt
0.0 = ptj4min ! minimum pt for the fourth jet in pt
-1.0 = ptj1max ! maximum pt for the leading jet in pt
-1.0 = ptj2max ! maximum pt for the second jet in pt
-1.0 = ptj3max ! maximum pt for the third jet in pt
-1.0 = ptj4max ! maximum pt for the fourth jet in pt
0 = cutuse ! reject event if fails any (0) / all (1) jet pt cuts
#******
# Control the pt's of leptons sorted by pt *
#******
0.0 = ptl1min ! minimum pt for the leading lepton in pt
0.0 = ptl2min ! minimum pt for the second lepton in pt
0.0 = ptl3min ! minimum pt for the third lepton in pt
0.0 = ptl4min ! minimum pt for the fourth lepton in pt
-1.0 = ptl1max ! maximum pt for the leading lepton in pt
-1.0 = ptl2max ! maximum pt for the second lepton in pt
-1.0 = ptl3max ! maximum pt for the third lepton in pt
-1.0 = ptl4max ! maximum pt for the fourth lepton in pt
#******
# Control the Ht(k)=Sum of k leading jets *
#******
0.0 = htjmin ! minimum jet HT=Sum(jet pt)
-1.0 = htjmax ! maximum jet HT=Sum(jet pt)
0.0 = ihtmin !inclusive Ht for all partons (including b)
-1.0 = ihtmax !inclusive Ht for all partons (including b)
0.0 = ht2min ! minimum Ht for the two leading jets
0.0 = ht3min ! minimum Ht for the three leading jets
0.0 = ht4min ! minimum Ht for the four leading jets
-1.0 = ht2max ! maximum Ht for the two leading jets
-1.0 = ht3max ! maximum Ht for the three leading jets
-1.0 = ht4max ! maximum Ht for the four leading jets
#******
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
# When ptgmin>0, pta and draj are not going to be used *
#******
0.0 = ptgmin ! Min photon transverse momentum
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/9801442
True = isoEM ! isolate photons from EM energy (photons and leptons)
#******
# WBF cuts *
#******
0.0 = xetamin ! minimum rapidity for two jets in the WBF case
0.0 = deltaeta ! minimum rapidity for two jets in the WBF case
#******
# Turn on either the ktdurham or ptlund cut to activate *
# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829] *
#******
-1.0 = ktdurham
0.4 = dparameter
-1.0 = ptlund
= pdgs_for_
#******
# maximal pdg code for quark to be considered as a light jet *
# (otherwise b cuts are applied) *
#******
4 = maxjetflavor ! Maximum jet pdg code
#******
#
#******
# Store info for systematics studies *
# WARNING: Do not use for interference type of computation *
#******
False = use_syst ! Enable systematics studies
#
#******
# Parameter of the systematics study
# will be used by SysCalc (if installed)
#******
#
0.5 1 2 = sys_scalefact # factorization/
None = sys_alpsfact # \alpha_s emission scale factors
auto = sys_matchscale # variation of merging scale
# PDF sets and number of members (0 or none for all members).
NNPDF23_
# MSTW2008nlo68cl
#
Thank you again,
Cheers,
Mohammad
Revision history for this message
|
#5 |
Hi,
The problem is that the code does not handle correctly the run_card entry:
= pdgs_for_
I'm going to create a patch, but the easiest solution is to set this parameter to 0
Cheers,
Olivier
Can you help with this problem?
Provide an answer of your own, or ask Mohammad for more information if necessary.