MadGraph5_aMC@NLO

zero cross section for e+ e- > u u~

Asked by Da Liu

Hi,

I am new user to MadGraph5_aMC_v2_5_2, but when I want to generate a simple process:
generate e+ e- > u u~
output
launch
parton

The result cross section is zero:

INFO: Update the dependent parameter of the param_card.dat
WARNING: Failed to update dependent parameter. This might create trouble for external program (like MadSpin/shower/...)
Generating 10000 events with run name run_01
survey run_01
INFO: compile directory
compile Source Directory
Using random number seed offset = 21
INFO: Running Survey
Creating Jobs
Working on SubProcesses
INFO: P1_ll_qq
INFO: Idle: 0, Running: 0, Completed: 0 [ current time: 22h34 ]
INFO: Idle: 0, Running: 0, Completed: 0 [ current time: 22h34 ]
INFO: End survey
refine 10000
Creating Jobs
INFO: Refine results to 10000
INFO: Generating 10000.0 unweigthed events.
INFO: Effective Luminosity 1.2e+103 pb^-1
INFO: need to improve 0 channels
Survey return zero cross section.
   Typical reasons are the following:
   1) A massive s-channel particle has a width set to zero.
   2) The pdf are zero for at least one of the initial state particles
      or you are using maxjetflavor=4 for initial state b:s.
   3) The cuts are too strong.
   Please check/correct your param_card and/or your run_card.
Zero result detected: See https://cp3.irmp.ucl.ac.be/projects/madgraph/wiki/FAQ-General-14

What happened here?

Thanks a lot.

Best wishes,
Da Liu

Question information

Language:
English Edit question
Status:
Solved
For:
MadGraph5_aMC@NLO Edit question
Assignee:
No assignee Edit question
Solved by:
Da Liu
Solved:
Last query:
Last reply:
Revision history for this message
Da Liu (liuda) said : 		#1

The run card:

#*********************************************************************
     0 = lpp1 ! beam 1 type
     0 = lpp2 ! beam 2 type
     500.0 = ebeam1 ! beam 1 total energy in GeV
     500.0 = ebeam2 ! beam 2 total energy in GeV
#*********************************************************************
# Beam polarization from -100 (left-handed) to 100 (right-handed) *
#*********************************************************************
     0.0 = polbeam1 ! beam polarization for beam 1
     0.0 = polbeam2 ! beam polarization for beam 2
#*********************************************************************
# PDF CHOICE: this automatically fixes also alpha_s and its evol. *
#*********************************************************************
     nn23lo1 = pdlabel ! PDF set
     230000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#*********************************************************************
# Renormalization and factorization scales *
#*********************************************************************
 False = fixed_ren_scale ! if .true. use fixed ren scale
 False = fixed_fac_scale ! if .true. use fixed fac scale
 91.188 = scale ! fixed ren scale
 91.188 = dsqrt_q2fact1 ! fixed fact scale for pdf1
 91.188 = dsqrt_q2fact2 ! fixed fact scale for pdf2
 -1 = dynamical_scale_choice ! Choose one of the preselected dynamical choices
 1.0 = scalefact ! scale factor for event-by-event scales
#*********************************************************************
# Type and output format
#*********************************************************************
  False = gridpack !True = setting up the grid pack
  -1.0 = time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
  3.0 = lhe_version ! Change the way clustering information pass to shower.
  True = clusinfo ! include clustering tag in output
  average = event_norm ! average/sum. Normalization of the weight in the LHEF

#*********************************************************************
# Matching parameter (MLM only)
#*********************************************************************
 0 = ickkw ! 0 no matching, 1 MLM
 1.0 = alpsfact ! scale factor for QCD emission vx
 False = chcluster ! cluster only according to channel diag
 5 = asrwgtflavor ! highest quark flavor for a_s reweight
 False = auto_ptj_mjj ! Automatic setting of ptj and mjj if xqcut >0
                                   ! (turn off for VBF and single top processes)
 0.0 = xqcut ! minimum kt jet measure between partons
#*********************************************************************
#
#*********************************************************************
# handling of the helicities:
# 0: sum over all helicities
# 1: importance sampling over helicities
#*********************************************************************
   0 = nhel ! using helicities importance sampling or not.
#*********************************************************************
# Generation bias, check the wiki page below for more information: *
# 'cp3.irmp.ucl.ac.be/projects/madgraph/wiki/LOEventGenerationBias' *
#*********************************************************************
 None = bias_module ! Bias type of bias, [None, ptj_bias, -custom_folder-]
 {} = bias_parameters ! Specifies the parameters of the module.
#
#*******************************
# Parton level cuts definition *
#*******************************
#
#
#*********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) ! Define on/off-shell for "$" and decay
#*********************************************************************
  15.0 = bwcutoff ! (M+/-bwcutoff*Gamma)
#*********************************************************************
# Apply pt/E/eta/dr/mij/kt_durham cuts on decay products or not
# (note that etmiss/ptll/ptheavy/ht/sorted cuts always apply)
#*********************************************************************
   False = cut_decays ! Cut decay products
#*********************************************************************
# Standard Cuts *
#*********************************************************************
# Minimum and maximum pt's (for max, -1 means no cut) *
#*********************************************************************
 20.0 = ptj ! minimum pt for the jets
 0.0 = ptb ! minimum pt for the b
 10.0 = pta ! minimum pt for the photons
 10.0 = ptl ! minimum pt for the charged leptons
 0.0 = misset ! minimum missing Et (sum of neutrino's momenta)
 0.0 = ptheavy ! minimum pt for one heavy final state
 -1.0 = ptjmax ! maximum pt for the jets
 -1.0 = ptbmax ! maximum pt for the b
 -1.0 = ptamax ! maximum pt for the photons
 -1.0 = ptlmax ! maximum pt for the charged leptons
 -1.0 = missetmax ! maximum missing Et (sum of neutrino's momenta)
#*********************************************************************
# Minimum and maximum E's (in the center of mass frame) *
#*********************************************************************
  0.0 = ej ! minimum E for the jets
  0.0 = eb ! minimum E for the b
  0.0 = ea ! minimum E for the photons
  0.0 = el ! minimum E for the charged leptons
  -1.0 = ejmax ! maximum E for the jets
 -1.0 = ebmax ! maximum E for the b
 -1.0 = eamax ! maximum E for the photons
 -1.0 = elmax ! maximum E for the charged leptons
#*********************************************************************
# Maximum and minimum absolute rapidity (for max, -1 means no cut) *
#*********************************************************************
  5.0 = etaj ! max rap for the jets
  -1.0 = etab ! max rap for the b
 2.5 = etaa ! max rap for the photons
 2.5 = etal ! max rap for the charged leptons
 0.0 = etajmin ! min rap for the jets
 0.0 = etabmin ! min rap for the b
 0.0 = etaamin ! min rap for the photons
 0.0 = etalmin ! main rap for the charged leptons
#*********************************************************************
# Minimum and maximum DeltaR distance *
#*********************************************************************
 0.4 = drjj ! min distance between jets
 0.0 = drbb ! min distance between b's
 0.4 = drll ! min distance between leptons
 0.4 = draa ! min distance between gammas
 0.0 = drbj ! min distance between b and jet
 0.4 = draj ! min distance between gamma and jet
 0.4 = drjl ! min distance between jet and lepton
 0.0 = drab ! min distance between gamma and b
 0.0 = drbl ! min distance between b and lepton
 0.4 = dral ! min distance between gamma and lepton
 -1.0 = drjjmax ! max distance between jets
 -1.0 = drbbmax ! max distance between b's
 -1.0 = drllmax ! max distance between leptons
 -1.0 = draamax ! max distance between gammas
 -1.0 = drbjmax ! max distance between b and jet
 -1.0 = drajmax ! max distance between gamma and jet
 -1.0 = drjlmax ! max distance between jet and lepton
 -1.0 = drabmax ! max distance between gamma and b
 -1.0 = drblmax ! max distance between b and lepton
 -1.0 = dralmax ! maxdistance between gamma and lepton
#*********************************************************************
# Minimum and maximum invariant mass for pairs *
# WARNING: for four lepton final state mmll cut require to have *
# different lepton masses for each flavor! *
#*********************************************************************
 0.0 = mmjj ! min invariant mass of a jet pair
 0.0 = mmbb ! min invariant mass of a b pair
 0.0 = mmaa ! min invariant mass of gamma gamma pair
 0.0 = mmll ! min invariant mass of l+l- (same flavour) lepton pair
 -1.0 = mmjjmax ! max invariant mass of a jet pair
 -1.0 = mmbbmax ! max invariant mass of a b pair
 -1.0 = mmaamax ! max invariant mass of gamma gamma pair
 -1.0 = mmllmax ! max invariant mass of l+l- (same flavour) lepton pair
#*********************************************************************
# Minimum and maximum invariant mass for all letpons *
#*********************************************************************
 0.0 = mmnl ! min invariant mass for all letpons (l+- and vl)
 -1.0 = mmnlmax ! max invariant mass for all letpons (l+- and vl)
#*********************************************************************
# Minimum and maximum pt for 4-momenta sum of leptons *
#*********************************************************************
 0.0 = ptllmin ! Minimum pt for 4-momenta sum of leptons(l and vl)
 -1.0 = ptllmax ! Maximum pt for 4-momenta sum of leptons(l and vl)
#*********************************************************************
# Inclusive cuts *
#*********************************************************************
 0.0 = xptj ! minimum pt for at least one jet
 0.0 = xptb ! minimum pt for at least one b
 0.0 = xpta ! minimum pt for at least one photon
 0.0 = xptl ! minimum pt for at least one charged lepton
#*********************************************************************
# Control the pt's of the jets sorted by pt *
#*********************************************************************
 0.0 = ptj1min ! minimum pt for the leading jet in pt
 0.0 = ptj2min ! minimum pt for the second jet in pt
 0.0 = ptj3min ! minimum pt for the third jet in pt
 0.0 = ptj4min ! minimum pt for the fourth jet in pt
 -1.0 = ptj1max ! maximum pt for the leading jet in pt
 -1.0 = ptj2max ! maximum pt for the second jet in pt
 -1.0 = ptj3max ! maximum pt for the third jet in pt
 -1.0 = ptj4max ! maximum pt for the fourth jet in pt
 0 = cutuse ! reject event if fails any (0) / all (1) jet pt cuts
#*********************************************************************
# Control the pt's of leptons sorted by pt *
#*********************************************************************
 0.0 = ptl1min ! minimum pt for the leading lepton in pt
 0.0 = ptl2min ! minimum pt for the second lepton in pt
 0.0 = ptl3min ! minimum pt for the third lepton in pt
 0.0 = ptl4min ! minimum pt for the fourth lepton in pt
 -1.0 = ptl1max ! maximum pt for the leading lepton in pt
 -1.0 = ptl2max ! maximum pt for the second lepton in pt
 -1.0 = ptl3max ! maximum pt for the third lepton in pt
 -1.0 = ptl4max ! maximum pt for the fourth lepton in pt
#*********************************************************************
# Control the Ht(k)=Sum of k leading jets *
#*********************************************************************
 0.0 = htjmin ! minimum jet HT=Sum(jet pt)
 -1.0 = htjmax ! maximum jet HT=Sum(jet pt)
 0.0 = ihtmin !inclusive Ht for all partons (including b)
 -1.0 = ihtmax !inclusive Ht for all partons (including b)
 0.0 = ht2min ! minimum Ht for the two leading jets
 0.0 = ht3min ! minimum Ht for the three leading jets
 0.0 = ht4min ! minimum Ht for the four leading jets
 -1.0 = ht2max ! maximum Ht for the two leading jets
 -1.0 = ht3max ! maximum Ht for the three leading jets
 -1.0 = ht4max ! maximum Ht for the four leading jets
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
# When ptgmin>0, pta and draj are not going to be used *
#***********************************************************************
 0.0 = ptgmin ! Min photon transverse momentum
 0.4 = R0gamma ! Radius of isolation code
 1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
 1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/9801442
 True = isoEM ! isolate photons from EM energy (photons and leptons)
#*********************************************************************
# WBF cuts *
#*********************************************************************
 0.0 = xetamin ! minimum rapidity for two jets in the WBF case
 0.0 = deltaeta ! minimum rapidity for two jets in the WBF case
#***********************************************************************
# Turn on either the ktdurham or ptlund cut to activate *
# CKKW(L) merging with Pythia8 [arXiv:1410.3012, arXiv:1109.4829] *
#***********************************************************************
 -1.0 = ktdurham
 0.4 = dparameter
 -1.0 = ptlund
 1, 2, 3, 4, 5, 6, 21 = pdgs_for_merging_cut ! PDGs for two cuts above
#*********************************************************************
# maximal pdg code for quark to be considered as a light jet *
# (otherwise b cuts are applied) *
#*********************************************************************
 4 = maxjetflavor ! Maximum jet pdg code
#*********************************************************************
#
#*********************************************************************
# Store info for systematics studies *
# WARNING: Do not use for interference type of computation *
#*********************************************************************
   True = use_syst ! Enable systematics studies
#
#**************************************
# Parameter of the systematics study
# will be used by SysCalc (if installed)
#**************************************
#
0.5 1 2 = sys_scalefact # factorization/renormalization scale factor
None = sys_alpsfact # \alpha_s emission scale factors
auto = sys_matchscale # variation of merging scale
# PDF sets and number of members (0 or none for all members).
NNPDF23_lo_as_0130_qed = sys_pdf # list of pdf sets
# MSTW2008nlo68cl.LHgrid 1 = sys_pdf
#

Revision history for this message
Da Liu (liuda) said : 		#2

Hi,

I am sorry, I find that I don't install root.

Best wishes,
Da Liu

Revision history for this message
Olivier Mattelaer (olivier-mattelaer) said : 		#3

Hi,

We do not need root for such computation.
This seems to be similar to the following question: https://answers.launchpad.net/mg5amcnlo/+question/404132
where the problem was related to a specific version of gcc.
Which version of gcc did you use?
Can you use at least 4.6? (in the above topic, passing to 4.9 was solving the problem)

Cheers,

Olivier
> On Dec 16, 2016, at 14:33, Da Liu <email address hidden> wrote:
>
> Question #406797 on MadGraph5_aMC@NLO changed:
> https://answers.launchpad.net/mg5amcnlo/+question/406797
>
> Status: Open => Solved
>
> Da Liu confirmed that the question is solved:
> Hi,
>
> I am sorry, I find that I don't install root.
>
> Best wishes,
> Da Liu
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.