Higgs Branching Ratio
Dear MG experts
Following the question https:/
I did all instructions said by dr Olivier, but still have gluon gluon production 21 pb and total cross section (h>ZZ) 0.0347pb, which means BR( H>ZZ) = 1.7E-3, which is in conflict with CERN yellow pages. As my information that the error of NWA is of order (gamma/M) which means one should end up with result of Total sigma(h>
Could you please help and declaring that?????
Thanks
Ahmed
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- ahh
- Solved:
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Hi Ahmed,
h > Z Z doesn’t make any sense since at least one of the Z has to be on shell.
So could you provide all the information that is require to reproduce your computation/error (i.e. which model use, syntax use for the generation, which cut and which benchmark point).
Cheers,
Olivier
On Jul 6, 2014, at 8:41 AM, Ahmed Hammad <email address hidden> wrote:
> New question #251260 on MadGraph5_aMC@NLO:
> https:/
>
> Dear MG experts
> Following the question https:/
> I did all instructions said by dr Olivier, but still have gluon gluon production 21 pb and total cross section (h>ZZ) 0.0347pb, which means BR( H>ZZ) = 1.7E-3, which is in conflict with CERN yellow pages. As my information that the error of NWA is of order (gamma/M) which means one should end up with result of Total sigma(h>
> Could you please help and declaring that?????
> Thanks
> Ahmed
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
Dear Dr Olivier
Thanks for your reply.
I use heft model but i adopt the parameter ( higgs total decay width, Mt , MH, etc ) as in cern twiki page https:/
In fact i process h>4l through Z Z decay.
I found that the higgs production gg>h = 21pb and the total cross section of (h>4l) = 0.000412 +- 1.585e-06 pb .
If one follow the procedure of CMS (CMS PAS HIG-13-002) sigmma*BR, we found Br(h>4l =gg>h/h>4l) ~ 0.000019619, while in (https:/
Also, kindly could you please explain what did you mean by //h > Z Z doesn’t make any sense since at least one of the Z has to be on shell.
Thanks a lot
Hammad
Revision history for this message
|
#3 |
Hi,
Please send me the information that i ask for.
- proc_card
- param_card
- run_card
- anything else relevant.
That you use to produce your number. Without that information I have no way to cross-check your computation.
For example, is your h > 4l have a photon contribution or not? (Actualy did you try both choice?) Did you use the same width as in the Yellow report, …
> Also, kindly could you please explain what did you mean by //h > Z Z doesn’t make any sense since at least one of the Z has to be on shell.
I was meaning one of the Z to be off-shell, so in itself a BR to ZZ is meaningless (since it doesn’t make sense in the Narrow-width approximation).
But it does not matter for your question since you actually ask about the H > 4l BR and not the H to ZZ.
Cheers,
Olivier
On Jul 6, 2014, at 3:21 PM, Ahmed Hammad <email address hidden> wrote:
> Question #251260 on MadGraph5_aMC@NLO changed:
> https:/
>
> Status: Answered => Open
>
> Ahmed Hammad is still having a problem:
> Dear Dr Olivier
> Thanks for your reply.
> I use heft model but i adopt the parameter ( higgs total decay width, Mt , MH, etc ) as in cern twiki page https:/
> In fact i process h>4l through Z Z decay.
> I found that the higgs production gg>h = 21pb and the total cross section of (h>4l) = 0.000412 +- 1.585e-06 pb .
> If one follow the procedure of CMS (CMS PAS HIG-13-002) sigmma*BR, we found Br(h>4l =gg>h/h>4l) ~ 0.000019619, while in (https:/
> Also, kindly could you please explain what did you mean by //h > Z Z doesn’t make any sense since at least one of the Z has to be on shell.
>
> Thanks a lot
> Hammad
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
Dear dr Olivier here are the cards :
=======
#######
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
#######
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
#######
#######
## INFORMATION FOR MASS
#######
Block mass
5 4.700000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # set of param :1*MH, 1*MP
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(
9000006 125.000000 # h1 : MH
#######
## INFORMATION FOR SMINPUTS
#######
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
#######
## INFORMATION FOR YUKAWA
#######
Block yukawa
5 4.200000e+00 # ymb
6 1.645000e+02 # ymt
15 1.777000e+00 # ymtau
#######
## INFORMATION FOR DECAY
#######
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 4.07e-03 # WH
DECAY 9000006 6.382339e-03 # WH1
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
#======
# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
#======
Block QNUMBERS 9000006 # h1
1 0 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
4 0 # Particle/
=======
#******
# MadGraph5_aMC@NLO *
# *
# run_card.dat MadEvent *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/
# *
# Lines starting with a '# ' are info or comments *
# *
# mind the format: value = variable ! comment *
#******
#
#******
# Running parameters
#******
#
#******
# Tag name for the run (one word) *
#******
tag_1 = run_tag ! name of the run
#******
# Run to generate the grid pack *
#******
.false. = gridpack !True = setting up the grid pack
#******
# Number of events and rnd seed *
# Warning: Do not generate more than 1M events in a single run *
# If you want to run Pythia, avoid more than 50k events in a run. *
#******
10000 = nevents ! Number of unweighted events requested
0 = iseed ! rnd seed (0=assigned automatically=
#******
# Collider type and energy *
# lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton, *
# 3=photon from electron *
#******
1 = lpp1 ! beam 1 type
1 = lpp2 ! beam 2 type
7000 = ebeam1 ! beam 1 total energy in GeV
7000 = ebeam2 ! beam 2 total energy in GeV
#******
# Beam polarization from -100 (left-handed) to 100 (right-handed) *
#******
0 = polbeam1 ! beam polarization for beam 1
0 = polbeam2 ! beam polarization for beam 2
#******
# PDF CHOICE: this automatically fixes also alpha_s and its evol. *
#******
'cteq6l1' = pdlabel ! PDF set (lhapdf for using lhapdf)
10042 = lhaid ! PDF number used ONLY for LHAPDF
#******
# Renormalization and factorization scales *
#******
F = fixed_ren_scale ! if .true. use fixed ren scale
F = fixed_fac_scale ! if .true. use fixed fac scale
91.1880 = scale ! fixed ren scale
91.1880 = dsqrt_q2fact1 ! fixed fact scale for pdf1
91.1880 = dsqrt_q2fact2 ! fixed fact scale for pdf2
1 = scalefact ! scale factor for event-by-event scales
#******
# Matching - Warning! ickkw > 1 is still beta
#******
0 = ickkw ! 0 no matching, 1 MLM, 2 CKKW matching
1 = highestmult ! for ickkw=2, highest mult group
1 = ktscheme ! for ickkw=1, 1 Durham kT, 2 Pythia pTE
1 = alpsfact ! scale factor for QCD emission vx
F = chcluster ! cluster only according to channel diag
T = pdfwgt ! for ickkw=1, perform pdf reweighting
5 = asrwgtflavor ! highest quark flavor for a_s reweight
T = clusinfo ! include clustering tag in output
#******
#******
#
#******
# Automatic ptj and mjj cuts if xqcut > 0
# (turn off for VBF and single top processes)
#******
T = auto_ptj_mjj ! Automatic setting of ptj and mjj
#******
#
#******
# BW cutoff (M+/-bwcutoff*
#******
15 = bwcutoff ! (M+/-bwcutoff*
#******
# Apply pt/E/eta/dr/mij cuts on decay products or not
# (note that etmiss/
#******
T = cut_decays ! Cut decay products
#******
# Number of helicities to sum per event (0 = all helicities)
# 0 gives more stable result, but longer run time (needed for
# long decay chains e.g.).
# Use >=2 if most helicities contribute, e.g. pure QCD.
#******
0 = nhel ! Number of helicities used per event
#******
# Standard Cuts
#******
#
#******
# Minimum and maximum pt's (for max, -1 means no cut) *
#******
20 = ptj ! minimum pt for the jets
0 = ptb ! minimum pt for the b
10 = pta ! minimum pt for the photons
10 = ptl ! minimum pt for the charged leptons
0 = misset ! minimum missing Et (sum of neutrino's momenta)
0 = ptheavy ! minimum pt for one heavy final state
1.0 = ptonium ! minimum pt for the quarkonium states
-1 = ptjmax ! maximum pt for the jets
-1 = ptbmax ! maximum pt for the b
-1 = ptamax ! maximum pt for the photons
-1 = ptlmax ! maximum pt for the charged leptons
-1 = missetmax ! maximum missing Et (sum of neutrino's momenta)
#******
# Minimum and maximum E's (in the center of mass frame) *
#******
0 = ej ! minimum E for the jets
0 = eb ! minimum E for the b
0 = ea ! minimum E for the photons
0 = el ! minimum E for the charged leptons
-1 = ejmax ! maximum E for the jets
-1 = ebmax ! maximum E for the b
-1 = eamax ! maximum E for the photons
-1 = elmax ! maximum E for the charged leptons
#******
# Maximum and minimum absolute rapidity (for max, -1 means no cut) *
#******
5 = etaj ! max rap for the jets
-1 = etab ! max rap for the b
2.5 = etaa ! max rap for the photons
2.5 = etal ! max rap for the charged leptons
0.6 = etaonium ! max rap for the quarkonium states
0 = etajmin ! min rap for the jets
0 = etabmin ! min rap for the b
0 = etaamin ! min rap for the photons
0 = etalmin ! main rap for the charged leptons
#******
# Minimum and maximum DeltaR distance *
#******
0.4 = drjj ! min distance between jets
0 = drbb ! min distance between b's
0.4 = drll ! min distance between leptons
0.4 = draa ! min distance between gammas
0 = drbj ! min distance between b and jet
0.4 = draj ! min distance between gamma and jet
0.4 = drjl ! min distance between jet and lepton
0 = drab ! min distance between gamma and b
0 = drbl ! min distance between b and lepton
0.4 = dral ! min distance between gamma and lepton
-1 = drjjmax ! max distance between jets
-1 = drbbmax ! max distance between b's
-1 = drllmax ! max distance between leptons
-1 = draamax ! max distance between gammas
-1 = drbjmax ! max distance between b and jet
-1 = drajmax ! max distance between gamma and jet
-1 = drjlmax ! max distance between jet and lepton
-1 = drabmax ! max distance between gamma and b
-1 = drblmax ! max distance between b and lepton
-1 = dralmax ! maxdistance between gamma and lepton
#******
# Minimum and maximum invariant mass for pairs *
# WARNING: for four lepton final state mmll cut require to have *
# different lepton masses for each flavor! *
#******
0 = mmjj ! min invariant mass of a jet pair
0 = mmbb ! min invariant mass of a b pair
0 = mmaa ! min invariant mass of gamma gamma pair
0 = mmll ! min invariant mass of l+l- (same flavour) lepton pair
-1 = mmjjmax ! max invariant mass of a jet pair
-1 = mmbbmax ! max invariant mass of a b pair
-1 = mmaamax ! max invariant mass of gamma gamma pair
-1 = mmllmax ! max invariant mass of l+l- (same flavour) lepton pair
#******
# Minimum and maximum invariant mass for all letpons *
#******
0 = mmnl ! min invariant mass for all letpons (l+- and vl)
-1 = mmnlmax ! max invariant mass for all letpons (l+- and vl)
#******
# Minimum and maximum pt for 4-momenta sum of leptons *
#******
0 = ptllmin ! Minimum pt for 4-momenta sum of leptons(l and vl)
-1 = ptllmax ! Maximum pt for 4-momenta sum of leptons(l and vl)
#******
# Inclusive cuts *
#******
0 = xptj ! minimum pt for at least one jet
0 = xptb ! minimum pt for at least one b
0 = xpta ! minimum pt for at least one photon
0 = xptl ! minimum pt for at least one charged lepton
#******
# Control the pt's of the jets sorted by pt *
#******
0 = ptj1min ! minimum pt for the leading jet in pt
0 = ptj2min ! minimum pt for the second jet in pt
0 = ptj3min ! minimum pt for the third jet in pt
0 = ptj4min ! minimum pt for the fourth jet in pt
-1 = ptj1max ! maximum pt for the leading jet in pt
-1 = ptj2max ! maximum pt for the second jet in pt
-1 = ptj3max ! maximum pt for the third jet in pt
-1 = ptj4max ! maximum pt for the fourth jet in pt
0 = cutuse ! reject event if fails any (0) / all (1) jet pt cuts
#******
# Control the pt's of leptons sorted by pt *
#******
0 = ptl1min ! minimum pt for the leading lepton in pt
0 = ptl2min ! minimum pt for the second lepton in pt
0 = ptl3min ! minimum pt for the third lepton in pt
0 = ptl4min ! minimum pt for the fourth lepton in pt
-1 = ptl1max ! maximum pt for the leading lepton in pt
-1 = ptl2max ! maximum pt for the second lepton in pt
-1 = ptl3max ! maximum pt for the third lepton in pt
-1 = ptl4max ! maximum pt for the fourth lepton in pt
#******
# Control the Ht(k)=Sum of k leading jets *
#******
0 = htjmin ! minimum jet HT=Sum(jet pt)
-1 = htjmax ! maximum jet HT=Sum(jet pt)
0 = ihtmin !inclusive Ht for all partons (including b)
-1 = ihtmax !inclusive Ht for all partons (including b)
0 = ht2min ! minimum Ht for the two leading jets
0 = ht3min ! minimum Ht for the three leading jets
0 = ht4min ! minimum Ht for the four leading jets
-1 = ht2max ! maximum Ht for the two leading jets
-1 = ht3max ! maximum Ht for the three leading jets
-1 = ht4max ! maximum Ht for the four leading jets
#******
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
# When ptgmin>0, pta and draj are not going to be used *
#******
0 = ptgmin ! Min photon transverse momentum
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/9801442
.true. = isoEM ! isolate photons from EM energy (photons and leptons)
#******
# WBF cuts *
#******
0 = xetamin ! minimum rapidity for two jets in the WBF case
0 = deltaeta ! minimum rapidity for two jets in the WBF case
#******
# KT DURHAM CUT *
#******
-1 = ktdurham
0.4 = dparameter
#******
# maximal pdg code for quark to be considered as a light jet *
# (otherwise b cuts are applied) *
#******
4 = maxjetflavor ! Maximum jet pdg code
#******
# Jet measure cuts *
#******
0 = xqcut ! minimum kt jet measure between partons
#******
#
#******
# Store info for systematics studies *
# WARNING: If use_syst is T, matched Pythia output is *
# meaningful ONLY if plotted taking matchscale *
# reweighting into account! *
#******
F = use_syst ! Enable systematics studies
#
#******
# Parameter of the systematics study
# will be used by SysCalc (if installed)
#******
#
0.5 1 2 = sys_scalefact # factorization/
0.5 1 2 = sys_alpsfact # \alpha_s emission scale factors
30 50 = sys_matchscale # variation of merging scale
# PDF sets and number of members (0 or none for all members).
CT10nlo.LHgrid = sys_pdf # matching scales
# MSTW2008nlo68cl
=======
#******
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.1.2.beta2 2014-06-03 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* *
#******
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#******
set group_subprocesses Auto
set ignore_
set gauge unitary
set complex_mass_scheme False
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model heft
generate p p > h , h > z z > l- l+ l- l+
output
=======
Thanks for your help
Revision history for this message
|
#5 |
Hi Ahmed,
Here is a list of problem that I have found in your cards:
1) cut_decay is on T and ptl is on 10. Therefore some cut apply on the final state lepton. Such cut are never use for the computation of BR. You should either put
cut_decay on False or remove manually the cut on the minimum pt of the lepton.
2) I don’t see in the Yellow Report that you send to me that the computation done force two intermediate Z, this process has also a contribution from the Higgs decay in Gamma*.
I have compare the two and the difference is around 5%
3) With your card, I do not reproduce your result! for the cards that you provide to me, I have as result: 0.0006395 ± 2.4e-06
and not 0.000412. Are you sure that you provide me the correct card?
Cheers,
Olivier
On Jul 6, 2014, at 8:46 PM, Ahmed Hammad <email address hidden> wrote:
> Question #251260 on MadGraph5_aMC@NLO changed:
> https:/
>
> Status: Answered => Open
>
> Ahmed Hammad is still having a problem:
> Dear dr Olivier here are the cards :
> =======
> #######
> ## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
> #######
> ## ##
> ## Width set on Auto will be computed following the information ##
> ## present in the decay.py files of the model. ##
> ## See arXiv:1402.1178 for more details. ##
> ## ##
> #######
>
> #######
> ## INFORMATION FOR MASS
> #######
> Block mass
> 5 4.700000e+00 # MB
> 6 1.730000e+02 # MT
> 15 1.777000e+00 # MTA
> 23 9.118800e+01 # MZ
> 25 1.250000e+02 # set of param :1*MH, 1*MP
> ## Dependent parameters, given by model restrictions.
> ## Those values should be edited following the
> ## analytical expression. MG5 ignores those values
> ## but they are important for interfacing the output of MG5
> ## to external program such as Pythia.
> 1 0.000000 # d : 0.0
> 2 0.000000 # u : 0.0
> 3 0.000000 # s : 0.0
> 4 0.000000 # c : 0.0
> 11 0.000000 # e- : 0.0
> 12 0.000000 # ve : 0.0
> 13 0.000000 # mu- : 0.0
> 14 0.000000 # vm : 0.0
> 16 0.000000 # vt : 0.0
> 21 0.000000 # g : 0.0
> 22 0.000000 # a : 0.0
> 24 80.419002 # w+ : cmath.sqrt(
> 9000006 125.000000 # h1 : MH
>
> #######
> ## INFORMATION FOR SMINPUTS
> #######
> Block sminputs
> 1 1.325070e+02 # aEWM1
> 2 1.166390e-05 # Gf
> 3 1.180000e-01 # aS
>
> #######
> ## INFORMATION FOR YUKAWA
> #######
> Block yukawa
> 5 4.200000e+00 # ymb
> 6 1.645000e+02 # ymt
> 15 1.777000e+00 # ymtau
>
> #######
> ## INFORMATION FOR DECAY
> #######
> DECAY 6 1.491500e+00 # WT
> DECAY 23 2.441404e+00 # WZ
> DECAY 24 2.047600e+00 # WW
> DECAY 25 4.07e-03 # WH
> DECAY 9000006 6.382339e-03 # WH1
> ## Dependent parameters, given by model restrictions.
> ## Those values should be edited following the
> ## analytical expression. MG5 ignores those values
> ## but they are important for interfacing the output of MG5
> ## to external program such as Pythia.
> DECAY 1 0.000000 # d : 0.0
> DECAY 2 0.000000 # u : 0.0
> DECAY 3 0.000000 # s : 0.0
> DECAY 4 0.000000 # c : 0.0
> DECAY 5 0.000000 # b : 0.0
> DECAY 11 0.000000 # e- : 0.0
> DECAY 12 0.000000 # ve : 0.0
> DECAY 13 0.000000 # mu- : 0.0
> DECAY 14 0.000000 # vm : 0.0
> DECAY 15 0.000000 # ta- : 0.0
> DECAY 16 0.000000 # vt : 0.0
> DECAY 21 0.000000 # g : 0.0
> DECAY 22 0.000000 # a : 0.0
> #======
> # QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
> #======
>
> Block QNUMBERS 9000006 # h1
> 1 0 # 3 times electric charge
> 2 1 # number of spin states (2S+1)
> 3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
> 4 0 # Particle/
> =======
>
> #******
> # MadGraph5_aMC@NLO *
> # *
> # run_card.dat MadEvent *
> # *
> # This file is used to set the parameters of the run. *
> # *
> # Some notation/
> # *
> # Lines starting with a '# ' are info or comments *
> # *
> # mind the format: value = variable ! comment *
> #******
> #
> #******
> # Running parameters
> #******
> #
> #******
> # Tag name for the run (one word) *
> #******
> tag_1 = run_tag ! name of the run
> #******
> # Run to generate the grid pack *
> #******
> .false. = gridpack !True = setting up the grid pack
> #******
> # Number of events and rnd seed *
> # Warning: Do not generate more than 1M events in a single run *
> # If you want to run Pythia, avoid more than 50k events in a run. *
> #******
> 10000 = nevents ! Number of unweighted events requested
> 0 = iseed ! rnd seed (0=assigned automatically=
> #******
> # Collider type and energy *
> # lpp: 0=No PDF, 1=proton, -1=antiproton, 2=photon from proton, *
> # 3=photon from electron *
> #******
> 1 = lpp1 ! beam 1 type
> 1 = lpp2 ! beam 2 type
> 7000 = ebeam1 ! beam 1 total energy in GeV
> 7000 = ebeam2 ! beam 2 total energy in GeV
> #******
> # Beam polarization from -100 (left-handed) to 100 (right-handed) *
> #******
> 0 = polbeam1 ! beam polarization for beam 1
> 0 = polbeam2 ! beam polarization for beam 2
> #******
> # PDF CHOICE: this automatically fixes also alpha_s and its evol. *
> #******
> 'cteq6l1' = pdlabel ! PDF set (lhapdf for using lhapdf)
> 10042 = lhaid ! PDF number used ONLY for LHAPDF
> #******
> # Renormalization and factorization scales *
> #******
> F = fixed_ren_scale ! if .true. use fixed ren scale
> F = fixed_fac_scale ! if .true. use fixed fac scale
> 91.1880 = scale ! fixed ren scale
> 91.1880 = dsqrt_q2fact1 ! fixed fact scale for pdf1
> 91.1880 = dsqrt_q2fact2 ! fixed fact scale for pdf2
> 1 = scalefact ! scale factor for event-by-event scales
> #******
> # Matching - Warning! ickkw > 1 is still beta
> #******
> 0 = ickkw ! 0 no matching, 1 MLM, 2 CKKW matching
> 1 = highestmult ! for ickkw=2, highest mult group
> 1 = ktscheme ! for ickkw=1, 1 Durham kT, 2 Pythia pTE
> 1 = alpsfact ! scale factor for QCD emission vx
> F = chcluster ! cluster only according to channel diag
> T = pdfwgt ! for ickkw=1, perform pdf reweighting
> 5 = asrwgtflavor ! highest quark flavor for a_s reweight
> T = clusinfo ! include clustering tag in output
> #******
> #******
> #
> #******
> # Automatic ptj and mjj cuts if xqcut > 0
> # (turn off for VBF and single top processes)
> #******
> T = auto_ptj_mjj ! Automatic setting of ptj and mjj
> #******
> #
> #******
> # BW cutoff (M+/-bwcutoff*
> #******
> 15 = bwcutoff ! (M+/-bwcutoff*
> #******
> # Apply pt/E/eta/dr/mij cuts on decay products or not
> # (note that etmiss/
> #******
> T = cut_decays ! Cut decay products
> #******
> # Number of helicities to sum per event (0 = all helicities)
> # 0 gives more stable result, but longer run time (needed for
> # long decay chains e.g.).
> # Use >=2 if most helicities contribute, e.g. pure QCD.
> #******
> 0 = nhel ! Number of helicities used per event
> #******
> # Standard Cuts
> #******
> #
> #******
> # Minimum and maximum pt's (for max, -1 means no cut) *
> #******
> 20 = ptj ! minimum pt for the jets
> 0 = ptb ! minimum pt for the b
> 10 = pta ! minimum pt for the photons
> 10 = ptl ! minimum pt for the charged leptons
> 0 = misset ! minimum missing Et (sum of neutrino's momenta)
> 0 = ptheavy ! minimum pt for one heavy final state
> 1.0 = ptonium ! minimum pt for the quarkonium states
> -1 = ptjmax ! maximum pt for the jets
> -1 = ptbmax ! maximum pt for the b
> -1 = ptamax ! maximum pt for the photons
> -1 = ptlmax ! maximum pt for the charged leptons
> -1 = missetmax ! maximum missing Et (sum of neutrino's momenta)
> #******
> # Minimum and maximum E's (in the center of mass frame) *
> #******
> 0 = ej ! minimum E for the jets
> 0 = eb ! minimum E for the b
> 0 = ea ! minimum E for the photons
> 0 = el ! minimum E for the charged leptons
> -1 = ejmax ! maximum E for the jets
> -1 = ebmax ! maximum E for the b
> -1 = eamax ! maximum E for the photons
> -1 = elmax ! maximum E for the charged leptons
> #******
> # Maximum and minimum absolute rapidity (for max, -1 means no cut) *
> #******
> 5 = etaj ! max rap for the jets
> -1 = etab ! max rap for the b
> 2.5 = etaa ! max rap for the photons
> 2.5 = etal ! max rap for the charged leptons
> 0.6 = etaonium ! max rap for the quarkonium states
> 0 = etajmin ! min rap for the jets
> 0 = etabmin ! min rap for the b
> 0 = etaamin ! min rap for the photons
> 0 = etalmin ! main rap for the charged leptons
> #******
> # Minimum and maximum DeltaR distance *
> #******
> 0.4 = drjj ! min distance between jets
> 0 = drbb ! min distance between b's
> 0.4 = drll ! min distance between leptons
> 0.4 = draa ! min distance between gammas
> 0 = drbj ! min distance between b and jet
> 0.4 = draj ! min distance between gamma and jet
> 0.4 = drjl ! min distance between jet and lepton
> 0 = drab ! min distance between gamma and b
> 0 = drbl ! min distance between b and lepton
> 0.4 = dral ! min distance between gamma and lepton
> -1 = drjjmax ! max distance between jets
> -1 = drbbmax ! max distance between b's
> -1 = drllmax ! max distance between leptons
> -1 = draamax ! max distance between gammas
> -1 = drbjmax ! max distance between b and jet
> -1 = drajmax ! max distance between gamma and jet
> -1 = drjlmax ! max distance between jet and lepton
> -1 = drabmax ! max distance between gamma and b
> -1 = drblmax ! max distance between b and lepton
> -1 = dralmax ! maxdistance between gamma and lepton
> #******
> # Minimum and maximum invariant mass for pairs *
> # WARNING: for four lepton final state mmll cut require to have *
> # different lepton masses for each flavor! *
> #******
> 0 = mmjj ! min invariant mass of a jet pair
> 0 = mmbb ! min invariant mass of a b pair
> 0 = mmaa ! min invariant mass of gamma gamma pair
> 0 = mmll ! min invariant mass of l+l- (same flavour) lepton pair
> -1 = mmjjmax ! max invariant mass of a jet pair
> -1 = mmbbmax ! max invariant mass of a b pair
> -1 = mmaamax ! max invariant mass of gamma gamma pair
> -1 = mmllmax ! max invariant mass of l+l- (same flavour) lepton pair
> #******
> # Minimum and maximum invariant mass for all letpons *
> #******
> 0 = mmnl ! min invariant mass for all letpons (l+- and vl)
> -1 = mmnlmax ! max invariant mass for all letpons (l+- and vl)
> #******
> # Minimum and maximum pt for 4-momenta sum of leptons *
> #******
> 0 = ptllmin ! Minimum pt for 4-momenta sum of leptons(l and vl)
> -1 = ptllmax ! Maximum pt for 4-momenta sum of leptons(l and vl)
> #******
> # Inclusive cuts *
> #******
> 0 = xptj ! minimum pt for at least one jet
> 0 = xptb ! minimum pt for at least one b
> 0 = xpta ! minimum pt for at least one photon
> 0 = xptl ! minimum pt for at least one charged lepton
> #******
> # Control the pt's of the jets sorted by pt *
> #******
> 0 = ptj1min ! minimum pt for the leading jet in pt
> 0 = ptj2min ! minimum pt for the second jet in pt
> 0 = ptj3min ! minimum pt for the third jet in pt
> 0 = ptj4min ! minimum pt for the fourth jet in pt
> -1 = ptj1max ! maximum pt for the leading jet in pt
> -1 = ptj2max ! maximum pt for the second jet in pt
> -1 = ptj3max ! maximum pt for the third jet in pt
> -1 = ptj4max ! maximum pt for the fourth jet in pt
> 0 = cutuse ! reject event if fails any (0) / all (1) jet pt cuts
> #******
> # Control the pt's of leptons sorted by pt *
> #******
> 0 = ptl1min ! minimum pt for the leading lepton in pt
> 0 = ptl2min ! minimum pt for the second lepton in pt
> 0 = ptl3min ! minimum pt for the third lepton in pt
> 0 = ptl4min ! minimum pt for the fourth lepton in pt
> -1 = ptl1max ! maximum pt for the leading lepton in pt
> -1 = ptl2max ! maximum pt for the second lepton in pt
> -1 = ptl3max ! maximum pt for the third lepton in pt
> -1 = ptl4max ! maximum pt for the fourth lepton in pt
> #******
> # Control the Ht(k)=Sum of k leading jets *
> #******
> 0 = htjmin ! minimum jet HT=Sum(jet pt)
> -1 = htjmax ! maximum jet HT=Sum(jet pt)
> 0 = ihtmin !inclusive Ht for all partons (including b)
> -1 = ihtmax !inclusive Ht for all partons (including b)
> 0 = ht2min ! minimum Ht for the two leading jets
> 0 = ht3min ! minimum Ht for the three leading jets
> 0 = ht4min ! minimum Ht for the four leading jets
> -1 = ht2max ! maximum Ht for the two leading jets
> -1 = ht3max ! maximum Ht for the three leading jets
> -1 = ht4max ! maximum Ht for the four leading jets
> #******
> # Photon-isolation cuts, according to hep-ph/9801442 *
> # When ptgmin=0, all the other parameters are ignored *
> # When ptgmin>0, pta and draj are not going to be used *
> #******
> 0 = ptgmin ! Min photon transverse momentum
> 0.4 = R0gamma ! Radius of isolation code
> 1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
> 1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/9801442
> .true. = isoEM ! isolate photons from EM energy (photons and leptons)
> #******
> # WBF cuts *
> #******
> 0 = xetamin ! minimum rapidity for two jets in the WBF case
> 0 = deltaeta ! minimum rapidity for two jets in the WBF case
> #******
> # KT DURHAM CUT *
> #******
> -1 = ktdurham
> 0.4 = dparameter
> #******
> # maximal pdg code for quark to be considered as a light jet *
> # (otherwise b cuts are applied) *
> #******
> 4 = maxjetflavor ! Maximum jet pdg code
> #******
> # Jet measure cuts *
> #******
> 0 = xqcut ! minimum kt jet measure between partons
> #******
> #
> #******
> # Store info for systematics studies *
> # WARNING: If use_syst is T, matched Pythia output is *
> # meaningful ONLY if plotted taking matchscale *
> # reweighting into account! *
> #******
> F = use_syst ! Enable systematics studies
> #
> #******
> # Parameter of the systematics study
> # will be used by SysCalc (if installed)
> #******
> #
> 0.5 1 2 = sys_scalefact # factorization/
> 0.5 1 2 = sys_alpsfact # \alpha_s emission scale factors
> 30 50 = sys_matchscale # variation of merging scale
> # PDF sets and number of members (0 or none for all members).
> CT10nlo.LHgrid = sys_pdf # matching scales
> # MSTW2008nlo68cl
> =======
>
> #******
> #* MadGraph5_aMC@NLO *
> #* *
> #* * * *
> #* * * * * *
> #* * * * * 5 * * * * *
> #* * * * * *
> #* * * *
> #* *
> #* *
> #* VERSION 2.1.2.beta2 2014-06-03 *
> #* *
> #* The MadGraph5_aMC@NLO Development Team - Find us at *
> #* https:/
> #* *
> #******
> #* *
> #* Command File for MadGraph5_aMC@NLO *
> #* *
> #* run as ./bin/mg5_aMC filename *
> #* *
> #******
>
> set group_subprocesses Auto
> set ignore_
> set gauge unitary
> set complex_mass_scheme False
> import model sm
> define p = g u c d s u~ c~ d~ s~
> define j = g u c d s u~ c~ d~ s~
> define l+ = e+ mu+
> define l- = e- mu-
> define vl = ve vm vt
> define vl~ = ve~ vm~ vt~
> import model heft
> generate p p > h , h > z z > l- l+ l- l+
> output
> =======
>
> Thanks for your help
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
Dear Dr Olivier
First of all, i want to thank you for your help.
Now i see, the problem was the photon contribution and MG cuts.
Thanks again
Ahmed