Unable to get HP Laserjet 1020 working after installing all the pkgs with synaptic and configuring with HPLIP?
sunset46@
HP Linux Imaging and Printing System (ver. 2.8.7)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
warning: Invalid ppd_dir value: None
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux sunset46-desktop 2.6.27-11-generic #1 SMP Wed Apr 1 20:57:48 UTC 2009 i686 GNU/Linux
Distribution:
ubuntu 8.10
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
error: SIP not installed or version not found.
Checking for CUPS...
Status: scheduler is running
Version: 1.3.9
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: dbus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.7 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=2.8.7
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-
foomatic-
foomatic-
internal-
restricted-build=no
-------
| DISCOVERED PARALLEL DEVICES |
-------
No devices found.
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
FN10G4T
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
HP-LaserJet-1020
----------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP LaserJet 1020 Foomatic/foo2zjs (recommended)
Printer status: printer HP-LaserJet-1020 is idle. enabled since Tue 28 Apr 2009 01:53:20 PM CDT
error: Required plug-in status: Not installed
Communication status: Good
HP_LaserJet_1020
----------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP LaserJet 1022 Foomatic/hpijs, hpijs 2.8.7.3 - HPLIP 2.8.7
Printer status: printer HP_LaserJet_1020 now printing HP_LaserJet_1020-0. enabled since Tue 28 Apr 2009 02:02:40 PM CDT
error: Required plug-in status: Not installed
Communication status: Good
HPlaserjet
----------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP LaserJet 1020 Foomatic/foo2zjs (recommended)
Printer status: printer HPlaserjet is idle. enabled since Tue 28 Apr 2009 01:59:47 PM CDT
error: Required plug-in status: Not installed
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x2b17 at 002:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/002/002
# owner: lp
# group: scanner
user::rw-
user:sunset46:rw-
group::rw-
mask::rw-
other::r--
-----------
| SUMMARY |
-----------
error: 7 errors and/or warnings.
Please refer to the installation instructions at:
http://
Done.
sunset46@
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Can you help with this problem?
Provide an answer of your own, or ask Sunset for more information if necessary.