HP LaserJet P1005 setup failure
I'm trying to install my new HP Laserjet on my laptop running Ubuntu 8.10 Intrepid.
hp-setup offers two different drivers. In either case, a test page does not print. The printer state gives "No %%Pages: Comment in header!"
hp-firmware shows the following error:
error: Firmware file '/usr/share/
error: Firmware download failed.
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Marvo
- Solved:
- Last query:
- Last reply:
Revision history for this message
![]() |
#1 |
Please run hp-check -t and post the output
Thanks!
Aaron
Revision history for this message
![]() |
#2 |
HP Linux Imaging and Printing System (ver. 2.8.7)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
warning: Invalid ppd_dir value: None
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux martin-ubuntu 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux
Distribution:
ubuntu 8.10
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt version...
error: NOT FOUND OR FAILED TO LOAD!
Checking SIP version...
error: SIP not installed or version not found.
Checking for CUPS...
Status: scheduler is running
error: Version: (Not available. CUPS may not be installed or not running.)
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: dbus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt - Qt interface for Python...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.7 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=2.8.7
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-
foomatic-
foomatic-
internal-
restricted-build=no
-------
| DISCOVERED PARALLEL DEVICES |
-------
No devices found.
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
=BB0E8YN
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
warning: No queues found.
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.
Checking output of 'scanimage -L'...
error: scanimage not found.
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x3d17 at 004:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/004/002
# owner: lp
# group: scanner
user::rw-
user:martin:rw-
group::rw-
mask::rw-
other::r--
-----------
| SUMMARY |
-----------
error: 17 errors and/or warnings.
Please refer to the installation instructions at:
http://
Revision history for this message
![]() |
#3 |
Sorry, I've reinstalled the printer and run the test again. So here's the revised output:
HP Linux Imaging and Printing System (ver. 2.8.7)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
warning: Invalid ppd_dir value: None
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux martin-ubuntu 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux
Distribution:
ubuntu 8.10
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt version...
error: NOT FOUND OR FAILED TO LOAD!
Checking SIP version...
error: SIP not installed or version not found.
Checking for CUPS...
Status: scheduler is running
error: Version: (Not available. CUPS may not be installed or not running.)
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: dbus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt - Qt interface for Python...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.7 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=2.8.7
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-
foomatic-
foomatic-
internal-
restricted-build=no
-------
| DISCOVERED PARALLEL DEVICES |
-------
No devices found.
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
=BB0E8YN
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
HP_LaserJet_P1005
-----------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP LaserJet P3005 Postscript (recommended)
Printer status: printer HP_LaserJet_P1005 is idle. enabled since Fri 07 Nov 2008 18:25:23 GMT
HP Linux Imaging and Printing System (ver. 2.8.7)
System Tray Status Service ver. 0.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Required plug-in status: Not installed
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.
Checking output of 'scanimage -L'...
error: scanimage not found.
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x3d17 at 004:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/004/002
# owner: lp
# group: scanner
user::rw-
user:martin:rw-
group::rw-
mask::rw-
other::r--
-----------
| SUMMARY |
-----------
error: 18 errors and/or warnings.
Please refer to the installation instructions at:
http://
Revision history for this message
![]() |
#4 |
Only error I see right now is:
error: Required plug-in status: Not installed
Try running
sudo hp-plugin
Same thing?
A
Revision history for this message
![]() |
#6 |
Try:
sudo /usr/share/
Seems like the intrepid link is not there for hp-plugin.
A
Revision history for this message
![]() |
#7 |
That's installed the firmware. The printer made a sound for a second but it's still not printing.
I've run the test again in case you need the output.
HP Linux Imaging and Printing System (ver. 2.8.7)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
warning: Invalid ppd_dir value: None
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux martin-ubuntu 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux
Distribution:
ubuntu 8.10
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt version...
error: NOT FOUND OR FAILED TO LOAD!
Checking SIP version...
error: SIP not installed or version not found.
Checking for CUPS...
Status: scheduler is running
error: Version: (Not available. CUPS may not be installed or not running.)
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.4
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: dbus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt - Qt interface for Python...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.7 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
[dirs]
run = /var/run
cupsbackend = /usr/lib/
ppd = /usr/share/
doc = /usr/share/
drv = /usr/share/cups/drv
ppdbase = /usr/share/
home = /usr/share/hplip
cupsfilter = /usr/lib/
icon = no
[hplip]
version = 2.8.7
plugin = 1
[configure]
foomatic-
foomatic-
doc-build = yes
cups11-build = no
gui-build = yes
internal-tag = 2.8.7.3
foomatic-
pp-build = yes
scanner-build = yes
network-build = yes
restricted-build = no
dbus-build = yes
shadow-build = no
fax-build = yes
-------
| DISCOVERED PARALLEL DEVICES |
-------
No devices found.
-------
| DISCOVERED USB DEVICES |
-------
Device URI Model
-----
hp:/usb/
=BB0E8YN
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
HP_LaserJet_P1005
-----------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP LaserJet P3005 Postscript (recommended)
Printer status: printer HP_LaserJet_P1005 is idle. enabled since Fri 07 Nov 2008 22:16:15 GMT
HP Linux Imaging and Printing System (ver. 2.8.7)
System Tray Status Service ver. 0.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Required plug-in status: Not installed
Communication status: Good
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.
Checking output of 'scanimage -L'...
error: scanimage not found.
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x3d17 at 004:002:
Device URI: hp:/usb/
Device node: /dev/bus/
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/004/002
# owner: lp
# group: scanner
user::rw-
user:martin:rw-
group::rw-
mask::rw-
other::r--
-----------
| SUMMARY |
-----------
error: 18 errors and/or warnings.
Please refer to the installation instructions at:
http://
Revision history for this message
![]() |
#8 |
The plugin still isn't getting installed for some reason.
Is it possible to try the latest HPLIP from http://
A
Revision history for this message
![]() |
#9 |
I'm following the instructions on this page:
http://
I've downloaded the HPLIP and run "sh hplip-2.8.10.run" in the terminal window. But I get this:
sh: Can't open hplip-2.8.10.run
Is there something missing from my terminal command?
Revision history for this message
![]() |
#10 |
Please run in the directory where the .run file is located:
ls -l | grep hplip
A
Revision history for this message
![]() |
#11 |
Installation notes say:
Disable the CD-ROM/DVD source if you do not have the Ubunbtu installation media inserted in the drive.
How do I do this?
Revision history for this message
![]() |
#12 |
System -> Admin - > Software Source
uncheck the cd-rom. :)
Aaron
Revision history for this message
![]() |
#13 |
try:
sudo sh ./hplip-
On Fri, Nov 7, 2008 at 2:51 PM, Marvo
<email address hidden>wrote:
> Question #50581 on HPLIP changed:
> https:/
>
> Status: Needs information => Open
>
> Marvo gave more information on the question:
> I'm following the instructions on this page:
> http://
>
> I've downloaded the HPLIP and run "sh hplip-2.8.10.run" in the terminal
> window. But I get this:
>
> sh: Can't open hplip-2.8.10.run
>
> Is there something missing from my terminal command?
>
> --
> You received this question notification because you are a member of HP
> Linux Imaging and Printing, which is an answer contact for HPLIP.
>
Revision history for this message
![]() |
#14 |
Sorry. It's late at night here. Actually, I found the cd and put that it. It's installing the latest version now. Will report back soon.
Revision history for this message
![]() |
#15 |
Okay no problem!
If that doesn't work also try
chmod +x hplip-2.
Then
sh ./hplip-
A
Revision history for this message
![]() |
#16 |
That's fixed it. Thanks very much for your help.