How to print photo quality?
Whenever I try to print a photo on photo quality paper the printer - an HP Photosmart 8450 - sets an error message on the printer display of: Photo tray is engaged. Disengage it and press OK or cancel the job.
What can I do print it correctly. My OS is Fedora 7.
Regards,
Erik P. Olsen
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Erik,
Please run
hp-check -t
and post the output.
Also run hp-toolbox, print settings and be sure that the media source is set correctly.
A
|
Revision history for this message
|
#2 |
On 30/04/08 19:10, Aaron Albright wrote:
> Your question #31424 on HPLIP changed:
> https:/
>
> Status: Open => Needs information
>
> Aaron Albright requested for more information:
> Erik,
>
> Please run
>
> hp-check -t
>
> and post the output.
[erik@epohost ~]$ hp-check -t
HP Linux Imaging and Printing System (ver. 2.8.4)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux epohost.epolan.dk 2.6.21-1.3194.fc7 #1 SMP Wed May 23 22:35:01 EDT 2007
i686 athlon i386 GNU/Linux
Distribution:
fedora 7
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.0 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
OK, Version 4.7.3 installed
Checking for CUPS...
Status: scheduler is running
Version: 1.2.12
warning: /etc/cups/
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.3
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c
parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r
parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development
files...
OK, found.
Checking for dependency: dbus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development
files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline
scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure
that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
su -c "/sbin/modprobe ppdev"
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.4 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207
[hplip]
version=2.8.4
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=no
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-
foomatic-
foomatic-
internal-
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Cups-PDF
--------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/
PPD: /etc/cups/
PPD Description: Generic postscript color printer rev4
Printer status: printer Cups-PDF is idle. enabled since Tue 22 Apr 2008
22:35:45 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
LaserJet
--------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: socket:
PPD: /etc/cups/
PPD Description: HP LaserJet 2200 Postscript (recommended)
Printer status: printer LaserJet is idle. enabled since Wed 30 Apr 2008
09:37:48 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
Photosmart
----------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: socket:
PPD: /etc/cups/
PPD Description: HP PhotoSmart 8400 Foomatic/hpijs (recommended)
Printer status: printer Photosmart is idle. enabled since Tue 22 Apr 2008
22:52:54 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
Photosmart_8400
---------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/net/
PPD: /etc/cups/
PPD Description: HP PhotoSmart 8400 Foomatic/hpijs, hpijs 2.8.4
Printer status: printer Photosmart_8400 is idle. enabled since Wed 30 Apr 2008
00:11:42Printing...
error: Unable to communicate with device (code=12):
hp:/net/
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
-----------
| SUMMARY |
-----------
error: 5 errors and/or warnings.
Summary of needed commands to run to satisfy missing dependencies:
su -c "/sbin/modprobe ppdev"
Please refer to the installation instructions at:
http://
[erik@epohost ~]$ hp-check -t
HP Linux Imaging and Printing System (ver. 2.8.4)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux epohost.epolan.dk 2.6.21-1.3194.fc7 #1 SMP Wed May 23 22:35:01 EDT 2007
i686 athlon i386 GNU/Linux
Distribution:
fedora 7
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.0 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
OK, Version 4.7.3 installed
Checking for CUPS...
Status: scheduler is running
Version: 1.2.12
warning: /etc/cups/
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.3
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c
parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r
parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development
files...
OK, found.
Checking for dependency: dbus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development
files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline
scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure
that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
su -c "/sbin/modprobe ppdev"
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.4 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207
[hplip]
version=2.8.4
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=no
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-
foomatic-
foomatic-
internal-
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Cups-PDF
--------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/
PPD: /etc/cups/
PPD Description: Generic postscript color printer rev4
Printer status: printer Cups-PDF is idle. enabled since Tue 22 Apr 2008
22:35:45 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
LaserJet
--------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: socket:
PPD: /etc/cups/
PPD Description: HP LaserJet 2200 Postscript (recommended)
Printer status: printer LaserJet is idle. enabled since Wed 30 Apr 2008
09:37:48 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
Photosmart
----------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: socket:
PPD: /etc/cups/
PPD Description: HP PhotoSmart 8400 Foomatic/hpijs (recommended)
Printer status: printer Photosmart is idle. enabled since Tue 22 Apr 2008
22:52:54 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
Photosmart_8400
---------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/net/
PPD: /etc/cups/
PPD Description: HP PhotoSmart 8400 Foomatic/hpijs, hpijs 2.8.4
Printer status: printer Photosmart_8400 is idle. enabled since Wed 30 Apr 2008
00:11:42Printing...
error: Unable to communicate with device (code=12):
hp:/net/
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
-----------
| SUMMARY |
-----------
error: 5 errors and/or warnings.
Summary of needed commands to run to satisfy missing dependencies:
su -c "/sbin/modprobe ppdev"
Please refer to the installation instructions at:
http://
Done.
[erik@epohost ~]$
[erik@epohost ~]$ hp-check -t
HP Linux Imaging and Printing System (ver. 2.8.4)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux epohost.epolan.dk 2.6.21-1.3194.fc7 #1 SMP Wed May 23 22:35:01 EDT 2007
i686 athlon i386 GNU/Linux
Distribution:
fedora 7
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.0 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
OK, Version 4.7.3 installed
Checking for CUPS...
Status: scheduler is running
Version: 1.2.12
warning: /etc/cups/
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.82.3
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c
parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r
parameter (ie, hp-check -r).
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: cups-devel- Common Unix Printing System development
files...
OK, found.
Checking for dependency: dbus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development
files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline
scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure
that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
su -c "/sbin/modprobe ppdev"
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: python-devel - Python development files...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 2.8.4 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207
[hplip]
version=2.8.4
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=no
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-
foomatic-
foomatic-
internal-
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Cups-PDF
--------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: cups-pdf:/
PPD: /etc/cups/
PPD Description: Generic postscript color printer rev4
Printer status: printer Cups-PDF is idle. enabled since Tue 22 Apr 2008
22:35:45 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
LaserJet
--------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: socket:
PPD: /etc/cups/
PPD Description: HP LaserJet 2200 Postscript (recommended)
Printer status: printer LaserJet is idle. enabled since Wed 30 Apr 2008
09:37:48 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
Photosmart
----------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: socket:
PPD: /etc/cups/
PPD Description: HP PhotoSmart 8400 Foomatic/hpijs (recommended)
Printer status: printer Photosmart is idle. enabled since Tue 22 Apr 2008
22:52:54 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
Photosmart_8400
---------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/net/
PPD: /etc/cups/
PPD Description: HP PhotoSmart 8400 Foomatic/hpijs, hpijs 2.8.4
Printer status: printer Photosmart_8400 is idle. enabled since Wed 30 Apr 2008
00:11:42Printing...
error: Unable to communicate with device (code=12):
hp:/net/
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
-----------
| SUMMARY |
-----------
error: 5 errors and/or warnings.
Summary of needed commands to run to satisfy missing dependencies:
su -c "/sbin/modprobe ppdev"
Please refer to the installation instructions at:
http://
Done.
[erik@epohost ~]$
>
> Also run hp-toolbox, print settings and be sure that the media source is
> set correctly.
I had not previously set the media source correctly. In fact I wasn't sure what
it was. I now have it set as "Photo Tray". Then it prints on the photo paper as
expected. However, even though "Printed Border Around Each Page" is set to "No
border" it does not print borderless. Please see attach scanned copy of the
printout. The output from hp-toolbox was:
[erik@epohost ~]$ hp-toolbox
HP Linux Imaging and Printing System (ver. 2.8.4)
HP Device Manager ver. 13.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 2.8.4)
Print Utility ver. 4.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Regards,
--
Erik.
>
> A
>
|
Revision history for this message
|
#3 |
Erik,
Once the tray is select correctly you have to enable fullbleed printing;
under quality select (for example) "600 dpi, Color Full Bleed, Black + Color Cartr."
Once these are set you still need to ensure that the image is set to the correct size.
See:
http://
For help on making sure the image is sized correctly.
Hope this helps.
A
Can you help with this problem?
Provide an answer of your own, or ask Erik P. Olsen for more information if necessary.
