Laptop HP dv6058ea sound card doesn't play correctly
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
alsa-driver (Ubuntu) |
Fix Released
|
Low
|
Unassigned |
Bug Description
The sound card plays sound intermittently and it slows down the computer if I don't move the mouse.
1) tail -2 /proc/asound/
Mixers:
0: Conexant CX20549 (Venice)
2) amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 43
Mono:
Front Left: Playback 36 [84%] [off]
Front Right: Playback 36 [84%] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'LineIn',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Ext Mic',0
Capabilities: volume pswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 23
Front Left: 20 [87%] [30.00dB] Playback [off]
Front Right: 20 [87%] [30.00dB] Playback [off]
Simple mixer control 'Int Mic',0
Capabilities: volume pswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 23
Front Left: 20 [87%] [30.00dB] Playback [off]
Front Right: 20 [87%] [30.00dB] Playback [off]
Simple mixer control 'IntMic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
3) lspci -nv
00:00.0 0500: 10de:02f7 (rev a2)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.1 0500: 10de:02fa (rev a2)
Subsystem: 103c:30b7
Flags: 66MHz, fast devsel
00:00.2 0500: 10de:02fe (rev a2)
Subsystem: 103c:30b7
Flags: 66MHz, fast devsel
00:00.3 0500: 10de:02f8 (rev a2)
Subsystem: 103c:30b7
Flags: 66MHz, fast devsel
00:00.4 0500: 10de:02f9 (rev a2)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.5 0500: 10de:02ff (rev a2)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.6 0500: 10de:027f (rev a2)
Subsystem: 103c:30b7
Flags: 66MHz, fast devsel
00:00.7 0500: 10de:027e (rev a2)
Flags: 66MHz, fast devsel
00:02.0 0604: 10de:02fc (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0200000-c03fffff
00:03.0 0604: 10de:02fd (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: c0400000-c05fffff
00:04.0 0604: 10de:02fb (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: c1000000-c2ffffff
00:09.0 0500: 10de:0270 (rev a2)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0
00:0a.0 0601: 10de:0260 (rev a3)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 1d00 [size=128]
00:0a.1 0c05: 10de:0264 (rev a3)
Subsystem: 103c:30b7
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 3040 [size=64]
I/O ports at 3000 [size=64]
00:0a.3 0b40: 10de:0271 (rev a3)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at c0040000 (32-bit, non-prefetchable) [size=256K]
00:0b.0 0c03: 10de:026d (rev a3) (prog-if 10 [OHCI])
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
00:0b.1 0c03: 10de:026e (rev a3) (prog-if 20 [EHCI])
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 7
Memory at c0005000 (32-bit, non-prefetchable) [size=256]
00:0d.0 0101: 10de:0265 (rev f1) (prog-if 8a [Master SecP PriP])
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 3080 [size=16]
00:0e.0 0101: 10de:0266 (rev f1) (prog-if 85 [Master SecO PriO])
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
I/O ports at 30c0 [size=8]
I/O ports at 30b4 [size=4]
I/O ports at 30b8 [size=8]
I/O ports at 30b0 [size=4]
I/O ports at 3090 [size=16]
Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
00:10.0 0604: 10de:026f (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: c3000000-c30fffff
00:10.1 0403: 10de:026c (rev a2)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
00:14.0 0680: 10de:0269 (rev a3)
Subsystem: 103c:30b7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 30e0 [size=8]
00:18.0 0600: 1022:1100
Flags: fast devsel
00:18.1 0600: 1022:1101
Flags: fast devsel
00:18.2 0600: 1022:1102
Flags: fast devsel
00:18.3 0600: 1022:1103
Flags: fast devsel
03:00.0 0280: 14e4:4311 (rev 01)
Subsystem: 103c:1364
Flags: bus master, fast devsel, latency 0
Memory at c0400000 (32-bit, non-prefetchable) [size=16K]
05:00.0 0300: 10de:01d6 (rev a1) (prog-if 00 [VGA])
Subsystem: 103c:30b7
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at c2000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at c1000000 (64-bit, non-prefetchable) [size=16M]
07:05.0 0c00: 1180:0832 (prog-if 10 [OHCI])
Subsystem: 103c:30b7
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c3000000 (32-bit, non-prefetchable) [size=2K]
07:05.1 0805: 1180:0822 (rev 19)
Subsystem: 103c:30b7
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c3000800 (32-bit, non-prefetchable) [size=256]
07:05.2 0880: 1180:0843 (rev 01)
Subsystem: 103c:30b7
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at c3000c00 (32-bit, non-prefetchable) [size=256]
07:05.3 0880: 1180:0592 (rev 0a)
Subsystem: 103c:30b7
Flags: medium devsel, IRQ 11
Memory at c3001000 (32-bit, non-prefetchable) [size=256]
07:05.4 0880: 1180:0852 (rev 05)
Subsystem: 103c:30b7
Flags: medium devsel, IRQ 11
Memory at c3001400 (32-bit, non-prefetchable) [size=256]
4) asoundconf list
Names of available sound cards:
NVidia
5) cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No existe el fichero ó directorio
cat: /root/.asoundrc*: No existe el fichero ó directorio
6) dmesg
[ 0.000000] Linux version 2.6.20-11-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Mar 15 03:43:56 UTC 2007 (Ubuntu 2.6.20-
[ 0.000000] Command line: root=UUID=
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff00000 (usable)
[ 0.000000] BIOS-e820: 000000003ff00000 - 000000003ff17000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff17000 - 000000003ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261888) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 HP ) @ 0x00000000000f89a0
[ 0.000000] ACPI: RSDT (v001 HP RSDT 0x06040000 LTP 0x00000000) @ 0x000000003ff0fb99
[ 0.000000] ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x000000003ff16d52
[ 0.000000] ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003ff16dc6
[ 0.000000] ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x000000003ff16f48
[ 0.000000] ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x000000003ff16f84
[ 0.000000] ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003ff16fd8
[ 0.000000] ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ff00000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261888) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 000000000000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 261888
[ 0.000000] On node 0 totalpages: 261789
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1076 pages reserved
[ 0.000000] DMA zone: 2865 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254268 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: nVIDIA MPTABLE: Product ID: C51-MCP51 MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 at 0xFEC00000.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Processors: 2
[ 0.000000] Nosave address range: 000000000009d000 - 000000000009e000
[ 0.000000] Nosave address range: 000000000009e000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000d2000
[ 0.000000] Nosave address range: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257133
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 13.094337] Console: colour VGA+ 80x25
[ 13.094944] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 13.096086] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.096214] Checking aperture...
[ 13.096217] CPU 0: aperture @ e234000000 size 32 MB
[ 13.096220] Aperture too small (32 MB)
[ 13.103243] No AGP bridge found
[ 13.115665] Memory: 1020068k/1047552k available (2204k kernel code, 27088k reserved, 1143k data, 304k init)
[ 13.194092] Calibrating delay using timer specific routine.. 3217.64 BogoMIPS (lpj=6435284)
[ 13.194158] Security Framework v1.0.0 initialized
[ 13.194164] SELinux: Disabled at boot.
[ 13.194193] Mount-cache hash table entries: 256
[ 13.194338] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 13.194342] CPU: L2 Cache: 512K (64 bytes/line)
[ 13.194345] CPU 0/0 -> Node 0
[ 13.194347] CPU: Physical Processor ID: 0
[ 13.194349] CPU: Processor Core ID: 0
[ 13.194371] SMP alternatives: switching to UP code
[ 13.194622] Early unpacking initramfs... done
[ 13.564075] ACPI: Core revision 20060707
[ 13.566991] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 13.569684] ACPI: setting ELCR to 0ea0 (from 0ca0)
[ 13.777750] ExtINT not setup in hardware but reported by MP table
[ 13.818233] Using local APIC timer interrupts.
[ 13.880443] result 12557437
[ 13.880445] Detected 12.557 MHz APIC timer.
[ 13.882301] SMP alternatives: switching to SMP code
[ 13.882402] Booting processor 1/2 APIC 0x1
[ 13.893099] Initializing CPU#1
[ 13.970440] Calibrating delay using timer specific routine.. 3214.85 BogoMIPS (lpj=6429714)
[ 13.970447] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 13.970450] CPU: L2 Cache: 512K (64 bytes/line)
[ 13.970453] CPU 1/1 -> Node 0
[ 13.970455] CPU: Physical Processor ID: 0
[ 13.970457] CPU: Processor Core ID: 1
[ 13.970546] AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[ 13.974461] CPU 1: Syncing TSC to CPU 0.
[ 13.974153] CPU 1: synchronized TSC with CPU 0 (last diff -7 cycles, maxerr 480 cycles)
[ 13.974165] Brought up 2 CPUs
[ 13.974253] testing NMI watchdog ... OK.
[ 14.014293] Disabling vsyscall due to use of PM timer
[ 14.014296] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 14.014299] time.c: Detected 1607.350 MHz processor.
[ 14.905874] migration_cost=251
[ 14.906267] Time: 21:17:07 Date: 02/16/107
[ 14.906309] NET: Registered protocol family 16
[ 14.906401] ACPI: bus type pci registered
[ 14.906408] PCI: Using configuration type 1
[ 14.912137] ACPI: Interpreter enabled
[ 14.912140] ACPI: Using PIC for interrupt routing
[ 14.918997] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.919014] pnp: PnP ACPI init
[ 14.921677] pnp: PnP ACPI: found 11 devices
[ 14.921744] PCI: Probing PCI hardware
[ 14.921749] PCI: Probing PCI hardware (bus 00)
[ 14.922144] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 14.923269] Boot video device is 0000:05:00.0
[ 14.923579] PCI: Transparent bridge - 0000:00:10.0
[ 14.961864] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 14.963277] PCI: Discovered primary peer bus 04 [IRQ]
[ 14.963286] PCI: Using IRQ router default [10de/0260] at 0000:00:0a.0
[ 14.963425] NET: Registered protocol family 8
[ 14.963427] NET: Registered protocol family 20
[ 14.964042] pnp: 00:03: ioport range 0x1000-0x107f could not be reserved
[ 14.964046] pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
[ 14.964049] pnp: 00:03: ioport range 0x1400-0x147f has been reserved
[ 14.964053] pnp: 00:03: ioport range 0x1480-0x14ff could not be reserved
[ 14.964057] pnp: 00:03: ioport range 0x1800-0x187f has been reserved
[ 14.964060] pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
[ 14.964064] pnp: 00:03: ioport range 0x2000-0x203f has been reserved
[ 14.964433] PCI: Bridge: 0000:00:02.0
[ 14.964437] IO window: 4000-4fff
[ 14.964441] MEM window: c0200000-c03fffff
[ 14.964445] PREFETCH window: c3200000-c33fffff
[ 14.964448] PCI: Bridge: 0000:00:03.0
[ 14.964450] IO window: disabled.
[ 14.964454] MEM window: c0400000-c05fffff
[ 14.964457] PREFETCH window: disabled.
[ 14.964463] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0
[ 14.964518] PCI: Bridge: 0000:00:04.0
[ 14.964520] IO window: disabled.
[ 14.964523] MEM window: c1000000-c2ffffff
[ 14.964527] PREFETCH window: d0000000-dfffffff
[ 14.964531] PCI: Bridge: 0000:00:10.0
[ 14.964533] IO window: disabled.
[ 14.964538] MEM window: c3000000-c30fffff
[ 14.964541] PREFETCH window: disabled.
[ 14.964553] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 14.964561] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 14.964569] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 14.964579] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 14.964694] NET: Registered protocol family 2
[ 15.010019] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 15.010241] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 15.011756] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 15.012532] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.012537] TCP reno registered
[ 15.026093] checking if image is initramfs... it is
[ 15.751422] Freeing initrd memory: 6771k freed
[ 15.756032] Simple Boot Flag at 0x36 set to 0x1
[ 15.756777] audit: initializing netlink socket (disabled)
[ 15.756793] audit(117407982
[ 15.757004] VFS: Disk quotas dquot_6.5.1
[ 15.757028] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 15.757084] io scheduler noop registered
[ 15.757087] io scheduler anticipatory registered
[ 15.757090] io scheduler deadline registered
[ 15.757107] io scheduler cfq registered (default)
[ 15.962152] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 15.962175] assign_
[ 15.962180] Allocate Port Service[
[ 15.962258] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 15.962281] assign_
[ 15.962285] Allocate Port Service[
[ 15.962360] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 15.962383] assign_
[ 15.962386] Allocate Port Service[
[ 15.992727] Real Time Clock Driver v1.12ac
[ 15.992790] Linux agpgart interface v0.101 (c) Dave Jones
[ 15.992793] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.993470] mice: PS/2 mouse device common for all mice
[ 15.994206] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.994378] input: Macintosh mouse button emulation as /class/input/input0
[ 15.994427] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.994431] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.994703] PNP: PS/2 Controller [PNP0303:
[ 16.011350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.011357] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.011517] TCP cubic registered
[ 16.011528] NET: Registered protocol family 1
[ 16.012393] ACPI: (supports S0 S3 S4 S5)
[ 16.012446] Magic number: 15:131:298
[ 16.012477] hash matches device ttywf
[ 16.012581] drivers/
[ 16.012645] Freeing unused kernel memory: 304k freed
[ 16.023680] input: AT Translated Set 2 keyboard as /class/input/input1
[ 17.237398] Capability LSM initialized
[ 17.284680] ACPI: Thermal Zone [THRM] (32 C)
[ 17.755952] usbcore: registered new interface driver usbfs
[ 17.755980] usbcore: registered new interface driver hub
[ 17.783376] usbcore: registered new device driver usb
[ 17.784858] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 17.784879] NFORCE-MCP51: chipset revision 241
[ 17.784882] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 17.784887] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
[ 17.784894] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
[ 17.784903] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio
[ 17.784914] Probing IDE interface ide0...
[ 17.795112] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 17.813075] ieee1394: Initialized config rom entry `ip1394'
[ 17.868362] SCSI subsystem initialized
[ 17.896529] libata version 2.00 loaded.
[ 17.896572] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.529782] hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[ 18.866988] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 18.868366] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 18.868375] forcedeth: using HIGHDMA
[ 19.386090] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
[ 19.386263] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 19.386268] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 19.387426] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 19.387453] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xc0004000
[ 19.444988] usb usb1: configuration #1 chosen from 1 choice
[ 19.445219] hub 1-0:1.0: USB hub found
[ 19.445233] hub 1-0:1.0: 8 ports detected
[ 19.547336] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 19.547342] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 19.547384] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 19.547421] ehci_hcd 0000:00:0b.1: debug port 1
[ 19.547426] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 19.547442] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xc0005000
[ 19.547451] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.547551] usb usb2: configuration #1 chosen from 1 choice
[ 19.547586] hub 2-0:1.0: USB hub found
[ 19.547596] hub 2-0:1.0: 8 ports detected
[ 19.601790] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c3000000-
[ 19.657087] sata_nv 0000:00:0e.0: version 3.2
[ 19.657101] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 19.657124] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 19.657188] ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 5
[ 19.657226] ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 5
[ 19.657242] scsi0 : sata_nv
[ 20.121576] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.129596] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 20.139179] ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48
[ 20.139184] ata1.00: ata1: dev 0 multi count 16
[ 20.155126] ata1.00: configured for UDMA/100
[ 20.155185] scsi1 : sata_nv
[ 20.278902] usb 2-4: configuration #1 chosen from 1 choice
[ 20.465528] ata2: SATA link down (SStatus 0 SControl 300)
[ 20.476153] ATA: abnormal status 0x7F on port 0x30BF
[ 20.476322] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[ 20.487579] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
[ 20.487589] Uniform CD-ROM driver Revision: 3.20
[ 20.491400] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 20.491416] sda: Write Protect is off
[ 20.491418] sda: Mode Sense: 00 3a 00 00
[ 20.491437] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.491493] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 20.491503] sda: Write Protect is off
[ 20.491506] sda: Mode Sense: 00 3a 00 00
[ 20.491525] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.491532] sda: sda1 sda2 sda3 < sda5 >
[ 20.599917] sd 0:0:0:0: Attached scsi disk sda
[ 20.603934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.757510] usb 1-6: new low speed USB device using ohci_hcd and address 2
[ 20.841208] Attempting manual resume
[ 20.841212] swsusp: Resume From Partition 8:5
[ 20.841215] PM: Checking swsusp image.
[ 20.841456] PM: Resume from disk failed.
[ 20.885568] kjournald starting. Commit interval 5 seconds
[ 20.885587] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.976529] usb 1-6: configuration #1 chosen from 1 choice
[ 21.033660] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc0008b
[ 30.833284] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.925432] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.085041] NET: Registered protocol family 17
[ 31.200622] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 31.200664] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 31.368448] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 31.368453] sdhci: Copyright(c) Pierre Ossman
[ 31.368506] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[ 31.368544] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
[ 31.368600] mmc0: SDHCI at 0xc3000800 irq 11 DMA
[ 31.474320] Linux video capture interface: v2.00
[ 31.482639] input: PC Speaker as /class/input/input2
[ 31.533465] ieee80211_crypt: registered algorithm 'NULL'
[ 31.535996] ieee80211: 802.11 data/management
[ 31.536001] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 31.622523] usbcore: registered new interface driver hiddev
[ 31.664781] bcm43xx driver
[ 31.664895] PCI: No IRQ known for interrupt pin A of device 0000:03:00.0. Probably buggy MP table.
[ 31.664910] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 31.777515] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 31.785936] input: HID 1241:1177 as /class/input/input3
[ 31.786036] input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:0b.0-6
[ 31.786053] usbcore: registered new interface driver usbhid
[ 31.786058] drivers/
[ 31.786623] usbcore: registered new interface driver uvcvideo
[ 31.786627] USB Video Class driver (v0.1.0-c)
[ 31.890988] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 32.124577] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 32.188154] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 32.932588] hda_intel: azx_get_response timeout, switching to polling mode...
[ 33.389191] lp: driver loaded but no devices found
[ 33.566808] Adding 1638588k swap on /dev/disk/
[ 33.719152] EXT3 FS on sda2, internal journal
[ 35.372147] NET: Registered protocol family 10
[ 35.372267] lo: Disabled Privacy Extensions
[ 35.823585] No dock devices found.
[ 35.835564] input: Power Button (FF) as /class/input/input5
[ 35.835597] ACPI: Power Button (FF) [PWRF]
[ 35.835642] input: Power Button (CM) as /class/input/input6
[ 35.835662] ACPI: Power Button (CM) [PWRB]
[ 35.835704] input: Sleep Button (CM) as /class/input/input7
[ 35.835724] ACPI: Sleep Button (CM) [SLPB]
[ 35.835762] input: Lid Switch as /class/input/input8
[ 35.835781] ACPI: Lid Switch [LID]
[ 35.964558] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 35.964715] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 36.009470] ACPI: Battery Slot [BAT0] (battery present)
[ 36.061214] ibm_acpi: ec object not found
[ 36.098197] ACPI: AC Adapter [ACAD] (on-line)
[ 36.107396] Using specific hotkey driver
[ 36.149781] wmi_add device=
[ 36.149786] calling WQBA
[ 36.156539] pcc_acpi: loading...
[ 36.363227] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (version 2.00.00)
[ 36.363289] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 36.363294] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 41.586762] bcm43xx: Error: Microcode "bcm43xx_
[ 44.755129] ppdev: user-space parallel port driver
[ 45.804368] bcm43xx: Error: Microcode "bcm43xx_
[ 48.788497] Bluetooth: Core ver 2.11
[ 48.788562] NET: Registered protocol family 31
[ 48.788565] Bluetooth: HCI device and connection manager initialized
[ 48.788568] Bluetooth: HCI socket layer initialized
[ 48.955698] Bluetooth: L2CAP ver 2.8
[ 48.955704] Bluetooth: L2CAP socket layer initialized
[ 48.974176] Bluetooth: RFCOMM socket layer initialized
[ 48.974191] Bluetooth: RFCOMM TTY layer initialized
[ 48.974194] Bluetooth: RFCOMM ver 1.8
[ 55.985598] eth0: no IPv6 routers present
[ 59.925485] bcm43xx: Error: Microcode "bcm43xx_
[ 77.085186] bcm43xx: Error: Microcode "bcm43xx_
[ 92.405793] bcm43xx: Error: Microcode "bcm43xx_
[ 106.873988] bcm43xx: Error: Microcode "bcm43xx_
[ 120.172529] bcm43xx: Error: Microcode "bcm43xx_
[ 190.277813] bcm43xx: Error: Microcode "bcm43xx_
[ 263.311665] bcm43xx: Error: Microcode "bcm43xx_
[ 331.463969] bcm43xx: Error: Microcode "bcm43xx_
[ 399.425823] bcm43xx: Error: Microcode "bcm43xx_
7) cat /proc/interrupts
CPU0 CPU1
0: 210874 0 IO-APIC-edge timer
1: 648 0 IO-APIC-edge i8042
2: 0 0 XT-PIC-XT cascade
5: 9881 0 IO-APIC-edge libata
7: 25 0 IO-APIC-edge ehci_hcd:usb2
8: 0 0 IO-APIC-edge rtc
9: 462 0 IO-APIC-edge acpi
10: 86437 0 IO-APIC-edge eth0
11: 35826 0 IO-APIC-edge ohci_hcd:usb1, ohci1394, sdhci:slot0, HDA Intel
12: 124 0 IO-APIC-edge i8042
14: 7379 0 IO-APIC-edge ide0
NMI: 133 80
LOC: 210751 210725
ERR: 0
-------
-------
nVidia Corporation
MCP51 High Definition Audio
ProblemType: Bug
Architecture: amd64
Date: Wed Mar 14 19:28:17 2007
DistroRelease: Ubuntu 7.04
Uname: Linux turion64 2.6.20-10-generic #2 SMP Sun Mar 11 19:49:03 UTC 2007 x86_64 GNU/Linux
Related branches
description: | updated |
Changed in alsa-driver: | |
assignee: | brian-murray → nobody |
status: | Needs Info → Confirmed |
Changed in alsa-driver: | |
importance: | Undecided → Low |
status: | Confirmed → Fix Committed |
Thanks for taking the time to report this bug and helping to make Ubuntu better. Could you please add the output requested at https:/ /help.ubuntu. com/community/ DebuggingSoundP roblems ? Could you also elaborate as to how your sound plays incorrectly? Thanks in advance.