Ubuntu
linux-raspi package

Missing modules in linux-modules

Bug #1949370 reported by Juerg Haefliger on 2021-11-01

This bug affects 1 person

Affects		Status	Importance	Assigned to	Milestone
	linux-raspi (Ubuntu)	Fix Released	Undecided	Unassigned
	Impish	Fix Released	Medium	Juerg Haefliger

Bug Description

[Impact]

With the introduction of linux-modules-extra, some modules that were previously provided by linux-modules are now provided by linux-modules-extra. Since this is a non-essential package which doesn't get install automatically, we might be missing some 'important' modules. At the minimum, add all the modules that are required by the raspi DTBs and overlays.

[Test Case]

For example, enable the Pi PWM overlay with

dtoverlay=pwm-2chan,pin=12,func=4,pin2=13,func2=4

and then check lsmod:
$ lsmod | grep pwm_bcm2835

The module is not loaded because it is provided by the linux-modules-extra package which is not installed by default.

[Fix]

Identify modules that are required by Pi DTBs and overlays and add them to the linux-modules package.

[Where Problems Could Occur]

New modules might get loaded which could trigger kernel crashes.

See original description

Tags:

CVE References

Juerg Haefliger (juergh) on 2021-11-01

Changed in linux-raspi (Ubuntu):
assignee:	nobody → Juerg Haefliger (juergh)
summary:	- MIssing modules in linux-modules + Missing modules in linux-modules

Juerg Haefliger (juergh) on 2021-11-03

description:	updated
Changed in linux-raspi (Ubuntu Impish):
assignee:	nobody → Juerg Haefliger (juergh)
Changed in linux-raspi (Ubuntu):
assignee:	Juerg Haefliger (juergh) → nobody
Changed in linux-raspi (Ubuntu Impish):
importance:	Undecided → Medium

Juerg Haefliger (juergh) on 2021-11-04

Changed in linux-raspi (Ubuntu Impish):
status:	New → Fix Committed

Revision history for this message

Ubuntu Kernel Bot (ubuntu-kernel-bot) wrote on 2021-11-20:

This bug is awaiting verification that the linux-raspi/5.13.0-1011.13 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-impish' to 'verification-done-impish'. If the problem still exists, change the tag 'verification-needed-impish' to 'verification-failed-impish'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

tags:

added: verification-needed-impish

Revision history for this message

Juerg Haefliger (juergh) wrote on 2021-11-25:

Installed linux-raspi/5.13.0-1011.13 from impish-proposed and verified:

$ modinfo pwm_bcm2835 | head -2
filename: /lib/modules/5.13.0-1011-raspi/kernel/drivers/pwm/pwm-bcm2835.ko
license: GPL v2

tags:

added: verification-done-impish
removed: verification-needed-impish

Revision history for this message

Launchpad Janitor (janitor) wrote on 2021-11-29:

Download full text (47.9 KiB)

This bug was fixed in the package linux-raspi - 5.13.0-1011.13

---------------
linux-raspi (5.13.0-1011.13) impish; urgency=medium

* impish/linux-raspi: 5.13.0-1011.13 -proposed tracker (LP: #1949737)

  * Cannot start docker container on ubuntu 21.10 server for raspberry pi
    (LP: #1947601)
    - [Packaging] raspi: Add veth module to linux-modules package

* /dev/ttyUSB? port lost on upgrading to 21.10 (LP: #1947723)
- [Packaging] raspi: Add USB serial modules to linux-modules package

* Missing modules in linux-modules (LP: #1949370)
- [Packaging] raspi: Add additional modules to linux-modules package

[ Ubuntu: 5.13.0-22.22 ]

This bug was fixed in the package linux-raspi - 5.13.0-1011.13

---------------
linux-raspi (5.13.0-1011.13) impish; urgency=medium

* impish/linux-raspi: 5.13.0-1011.13 -proposed tracker (LP: #1949737)

* Cannot start docker container on ubuntu 21.10 server for raspberry pi
    (LP: #1947601)
    - [Packaging] raspi: Add veth module to linux-modules package

* /dev/ttyUSB? port lost on upgrading to 21.10 (LP: #1947723)
    - [Packaging] raspi: Add USB serial modules to linux-modules package

* Missing modules in linux-modules (LP: #1949370)
    - [Packaging] raspi: Add additional modules to linux-modules package

[ Ubuntu: 5.13.0-22.22 ]

* impish/linux: 5.13.0-22.22 -proposed tracker (LP: #1949740)
  * Packaging resync (LP: #1786013)
    - debian/dkms-versions -- update from kernel-versions (main/2021.11.08)
  * ebpf:  bpf_redirect fails with ip6 gre interfaces (LP: #1947164)
    - net: handle ARPHRD_IP6GRE in dev_is_mac_header_xmit()
  * require CAP_NET_ADMIN to attach N_HCI ldisc (LP: #1949516)
    - Bluetooth: hci_ldisc: require CAP_NET_ADMIN to attach N_HCI ldisc
  * CVE-2021-3744 // CVE-2021-3764
    - crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()
  * ppc64 BPF JIT mod by 1 will not return 0 (LP: #1948351)
    - powerpc/bpf: Fix BPF_MOD when imm == 1
  * Fix Screen freeze after resume from suspend with iGPU [1002:6987]
    (LP: #1949050)
    - drm/amdgpu: reenable BACO support for 699F:C7 polaris12 SKU
    - drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
    - drm/amdgpu: Fix crash on device remove/driver unload
  * Intel I225-IT ethernet controller: igc: probe of 0000:02:00.0 failed with
    error -1 (LP: #1945576)
    - igc: Remove _I_PHY_ID checking
    - igc: Remove phy->type checking
  * Fail to detect audio output from external monitor (LP: #1948767)
    - ALSA: hda: intel: Allow repeatedly probing on codec configuration errors
  * Drop "UBUNTU: SAUCE: cachefiles: Page leaking in
    cachefiles_read_backing_file while vmscan is active" (LP: #1947709)
    - Revert "UBUNTU: SAUCE: cachefiles: Page leaking in
      cachefiles_read_backing_file while vmscan is active"
  * rtw89 kernel module for Realtek 8852 wifi is missing (LP: #1945967)
    - rtw89: add Realtek 802.11ax driver
    - rtw89: Remove redundant check of ret after call to rtw89_mac_enable_bb_rf
    - rtw89: fix return value check in rtw89_cam_send_sec_key_cmd()
    - rtw89: remove unneeded semicolon
    - [Config] RTW89=m
  * Impish update: upstream stable patchset 2021-11-03 (LP: #1949636)
    - mm: fix uninitialized use in overcommit_policy_handler
    - usb: gadget: r8a66597: fix a loop in set_feature()
    - usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave
    - usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA
    - usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
    - cifs: fix incorrect check for null pointer in header_assemble
    - xen/x86: fix PV trap handling on secondary processors
    - usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c
    - USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
    - USB: cdc-acm: fix minor-number release
    - Revert "USB: bcma: Add a check for devm_gpiod_get"
    - binder: make sure fd closes complete
    - staging: greybus: uart: fix tty use after free
    - Re-enable UAS for LaCie Rugged USB3-FW with fk quirk
    - usb: dwc3: core: balance phy init and exit
    - usb: core: hcd: Add support for deferring roothub registration
    - USB: serial: mos7840: remove duplicated 0xac24 device ID
    - USB: serial: option: add Telit LN920 compositions
    - USB: serial: option: remove duplicate USB device ID
    - USB: serial: option: add device id for Foxconn T99W265
    - mcb: fix error handling in mcb_alloc_bus()
    - erofs: fix up erofs_lookup tracepoint
    - btrfs: prevent __btrfs_dump_space_info() to underflow its free space
    - xhci: Set HCD flag to defer primary roothub registration
    - serial: 8250: 8250_omap: Fix RX_LVL register offset
    - serial: mvebu-uart: fix driver's tx_empty callback
    - scsi: sd_zbc: Ensure buffer size is aligned to SECTOR_SIZE
    - drm/amd/pm: Update intermediate power state for SI
    - net: hso: fix muxed tty registration
    - comedi: Fix memory leak in compat_insnlist()
    - afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation
    - afs: Fix updating of i_blocks on file/dir extension
    - platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()
    - enetc: Fix illegal access when reading affinity_hint
    - enetc: Fix uninitialized struct dim_sample field usage
    - bnxt_en: Fix TX timeout when TX ring size is set to the smallest
    - net: hns3: fix change RSS 'hfunc' ineffective issue
    - net: hns3: check queue id range before using
    - net/smc: add missing error check in smc_clc_prfx_set()
    - net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
    - net: dsa: don't allocate the slave_mii_bus using devres
    - net: dsa: realtek: register the MDIO bus under devres
    - kselftest/arm64: signal: Add SVE to the set of features we can check for
    - kselftest/arm64: signal: Skip tests if required features are missing
    - s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
    - gpio: uniphier: Fix void functions to remove return value
    - qed: rdma - don't wait for resources under hw error recovery flow
    - net/mlx4_en: Don't allow aRFS for encapsulated packets
    - atlantic: Fix issue in the pm resume flow.
    - scsi: iscsi: Adjust iface sysfs attr detection
    - scsi: target: Fix the pgr/alua_support_store functions
    - tty: synclink_gt: rename a conflicting function name
    - fpga: machxo2-spi: Return an error on failure
    - fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
    - nvme-tcp: fix incorrect h2cdata pdu offset accounting
    - nvme: keep ctrl->namespaces ordered
    - thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
    - cifs: fix a sign extension bug
    - scsi: qla2xxx: Restore initiator in dual mode
    - scsi: lpfc: Use correct scnprintf() limit
    - irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
    - irqchip/gic-v3-its: Fix potential VPE leak on error
    - md: fix a lock order reversal in md_alloc
    - x86/asm: Fix SETZ size enqcmds() build failure
    - io_uring: put provided buffer meta data under memcg accounting
    - blktrace: Fix uaf in blk_trace access after removing by sysfs
    - net: phylink: Update SFP selected interface on advertising changes
    - net: macb: fix use after free on rmmod
    - net: stmmac: allow CSR clock of 300MHz
    - blk-mq: avoid to iterate over stale request
    - m68k: Double cast io functions to unsigned long
    - ipv6: delay fib6_sernum increase in fib6_add
    - cpufreq: intel_pstate: Override parameters if HWP forced by BIOS
    - bpf: Add oversize check before call kvcalloc()
    - xen/balloon: use a kernel thread instead a workqueue
    - nvme-multipath: fix ANA state updates when a namespace is not present
    - nvme-rdma: destroy cm id before destroy qp to avoid use after free
    - sparc32: page align size in arch_dma_alloc
    - amd/display: downgrade validation failure log level
    - block: check if a profile is actually registered in blk_integrity_unregister
    - block: flush the integrity workqueue in blk_integrity_unregister
    - blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
    - compiler.h: Introduce absolute_pointer macro
    - net: i825xx: Use absolute_pointer for memcpy from fixed memory location
    - sparc: avoid stringop-overread errors
    - qnx4: avoid stringop-overread errors
    - parisc: Use absolute_pointer() to define PAGE0
    - arm64: Mark __stack_chk_guard as __ro_after_init
    - alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile
    - net: 6pack: Fix tx timeout and slot time
    - spi: Fix tegra20 build with CONFIG_PM=n
    - EDAC/synopsys: Fix wrong value type assignment for edac_mode
    - EDAC/dmc520: Assign the proper type to dimm->edac_mode
    - thermal/drivers/int340x: Do not set a wrong tcc offset on resume
    - USB: serial: cp210x: fix dropped characters with CP2102
    - xen/balloon: fix balloon kthread freezing
    - qnx4: work around gcc false positive warning bug
    - mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()
    - mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
    - cifs: Not to defer close on file when lock is set
    - cifs: Fix soft lockup during fsstress
    - binder: fix freeze race
    - usb: cdns3: fix race condition before setting doorbell
    - misc: bcm-vk: fix tty registration race
    - misc: genwqe: Fixes DMA mask setting
    - KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest
    - nexthop: Fix division by zero while replacing a resilient group
    - platform/x86: amd-pmc: Increase the response register timeout
    - regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name
    - afs: Fix page leak
    - afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
    - regulator: max14577: Revert "regulator: max14577: Add proper module aliases
      strings"
    - virtio-net: fix pages leaking when building skb in big mode
    - net: dsa: tear down devlink port regions when tearing down the devlink port
      on error
    - net: bgmac-bcma: handle deferred probe error due to mac-address
    - napi: fix race inside napi_enable
    - net: hns3: fix inconsistent vf id print
    - net: hns3: fix misuse vf id and vport id in some logs
    - net: hns3: check vlan id before using it
    - net: hns3: fix a return value error in hclge_get_reset_status()
    - gpiolib: acpi: Make set-debounce-timeout failures non fatal
    - nexthop: Fix memory leaks in nexthop notification chain listeners
    - net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
    - net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
    - x86/fault: Fix wrong signal when vsyscall fails with pkey
    - scsi: sd_zbc: Support disks with more than 2**32 logical blocks
    - io_uring: fix race between poll completion and cancel_hash insertion
    - io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
    - io_uring: don't punt files update to io-wq unconditionally
    - drm/ttm: fix type mismatch error on sparc64
    - drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo
    - amd/display: enable panel orientation quirks
    - Revert drm/vc4 hdmi runtime PM changes
    - x86/setup: Call early_reserve_memory() earlier
    - irqchip/armada-370-xp: Fix ack/eoi breakage
    - arm64: add MTE supported check to thread switching and syscall entry/exit
    - software node: balance refcount for managed software nodes
    - usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval
  * ACL updates on OCFS2 are not revalidated (LP: #1947161) // Impish update:
    upstream stable patchset 2021-11-03 (LP: #1949636)
    - ocfs2: drop acl cache for directories too
  * Impish update: upstream stable patchset 2021-10-27 (LP: #1948977)
    - PCI: pci-bridge-emul: Add PCIe Root Capabilities Register
    - PCI: aardvark: Fix reporting CRS value
    - console: consume APC, DM, DCS
    - ARM: 9077/1: PLT: Move struct plt_entries definition to header
    - ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()
    - ARM: 9079/1: ftrace: Add MODULE_PLTS support
    - ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE
    - sctp: validate chunk size in __rcv_asconf_lookup
    - sctp: add param size validation for SCTP_PARAM_SET_PRIMARY
    - staging: rtl8192u: Fix bitwise vs logical operator in
      TranslateRxSignalStuff819xUsb()
    - coredump: fix memleak in dump_vma_snapshot()
    - um: virtio_uml: fix memory leak on init failures
    - dmaengine: acpi: Avoid comparison GSI with Linux vIRQ
    - perf test: Fix bpf test sample mismatch reporting
    - perf tools: Allow build-id with trailing zeros
    - thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
    - 9p/trans_virtio: Remove sysfs file on probe failure
    - prctl: allow to setup brk for et_dyn executables
    - nilfs2: use refcount_dec_and_lock() to fix potential UAF
    - profiling: fix shift-out-of-bounds bugs
    - PM: sleep: core: Avoid setting power.must_resume to false
    - pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was
      registered
    - pwm: mxs: Don't modify HW state in .probe() after the PWM chip was
      registered
    - dmaengine: idxd: fix wq slot allocation index check
    - platform/chrome: sensorhub: Add trace events for sample
    - platform/chrome: cros_ec_trace: Fix format warnings
    - ceph: allow ceph_put_mds_session to take NULL or ERR_PTR
    - ceph: cancel delayed work instead of flushing on mdsc teardown
    - Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
    - tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
    - thermal/core: Fix thermal_cooling_device_register() prototype
    - drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform
    - drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
    - dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER
    - parisc: Move pci_dev_is_behind_card_dino to where it is used
    - iommu/amd: Relocate GAMSup check to early_enable_iommus
    - dmaengine: idxd: depends on !UML
    - dmaengine: sprd: Add missing MODULE_DEVICE_TABLE
    - dmaengine: ioat: depends on !UML
    - dmaengine: xilinx_dma: Set DMA mask for coherent APIs
    - ceph: request Fw caps before updating the mtime in ceph_write_iter
    - ceph: remove the capsnaps when removing caps
    - ceph: lockdep annotations for try_nonblocking_invalidate
    - btrfs: update the bdev time directly when closing
    - btrfs: fix lockdep warning while mounting sprout fs
    - nilfs2: fix memory leak in nilfs_sysfs_create_device_group
    - nilfs2: fix NULL pointer in nilfs_##name##_attr_release
    - nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
    - nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
    - nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
    - nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
    - habanalabs: add validity check for event ID received from F/W
    - pwm: img: Don't modify HW state in .remove() callback
    - pwm: rockchip: Don't modify HW state in .remove() callback
    - pwm: stm32-lp: Don't modify HW state in .remove() callback
    - blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
    - blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
    - rtc: rx8010: select REGMAP_I2C
    - sched/idle: Make the idle timer expire in hard interrupt context
    - drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV
    - um: fix stub location calculation
    - RDMA/mlx5: Fix xlt_chunk_align calculation
    - perf symbol: Look for ImageBase in PE file to compute .text offset
    - staging: rtl8723bs: fix wpa_set_auth_algs() function
    - n64cart: fix return value check in n64cart_probe()
    - pwm: ab8500: Fix register offset calculation to not depend on probe order
    - thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not
      used
    - dmanegine: idxd: cleanup all device related bits after disabling device
    - dmaengine: idxd: have command status always set
    - dmaengine: idxd: fix abort status check
    - dmaengine: idxd: clear block on fault flag when clear wq
    - SUNRPC: don't pause on incomplete allocation
    - init: move usermodehelper_enable() to populate_rootfs()
    - dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER
    - arm64: mm: limit linear region to 51 bits for KVM in nVHE mode
    - drm/ttm: Fix a deadlock if the target BO is not idle during swap
    - of: property: Disable fw_devlink DT support for X86
    - riscv: dts: microchip: mpfs-icicle: Fix serial console
    - s390: add kmemleak annotation in stack_alloc()
    - ASoC: audio-graph: respawn Platform Support
    - ceph: fix memory leak on decode error in ceph_handle_caps
    - btrfs: delay blkdev_put until after the device remove
    - thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
    - habanalabs: fix nullifying of destroyed mmu pgt pool
    - habanalabs: fix mmu node address resolution in debugfs
    - habanalabs: add "in device creation" status
    - habanalabs: cannot sleep while holding spinlock
    - block: genhd: don't call blkdev_show() with major_names_lock held
    - cifs: properly invalidate cached root handle when closing it
    - io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
    - selinux,smack: fix subjective/objective credential use mixups
  * Impish update: upstream stable patchset 2021-10-22 (LP: #1948485)
    - xen: reset legacy rtc flag for PV domU
    - arm64/sve: Use correct size when reinitialising SVE state
    - PM: base: power: don't try to use non-existing RTC for storing data
    - PCI: Add AMD GPU multi-function power dependencies
    - drm/amd/amdgpu: Increase HWIP_MAX_INSTANCE to 10
    - drm/etnaviv: return context from etnaviv_iommu_context_get
    - drm/etnaviv: put submit prev MMU context when it exists
    - drm/etnaviv: stop abusing mmu_context as FE running marker
    - drm/etnaviv: keep MMU context across runtime suspend/resume
    - drm/etnaviv: exec and MMU state is lost when resetting the GPU
    - drm/etnaviv: fix MMU context leak on GPU reset
    - drm/etnaviv: reference MMU context when setting up hardware state
    - drm/etnaviv: add missing MMU context put when reaping MMU mapping
    - s390/sclp: fix Secure-IPL facility detection
    - x86/pat: Pass valid address to sanitize_phys()
    - x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
    - tipc: fix an use-after-free issue in tipc_recvmsg
    - ethtool: Fix rxnfc copy to user buffer overflow
    - net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
    - net-caif: avoid user-triggerable WARN_ON(1)
    - ptp: dp83640: don't define PAGE0
    - net/l2tp: Fix reference count leak in l2tp_udp_recv_core
    - r6040: Restore MDIO clock frequency after MAC reset
    - tipc: increase timeout in tipc_sk_enqueue()
    - drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused
    - perf machine: Initialize srcline string member in add_location struct
    - net/mlx5: FWTrace, cancel work on alloc pd error flow
    - net/mlx5: Fix potential sleeping in atomic context
    - nvme-tcp: fix io_work priority inversion
    - events: Reuse value read using READ_ONCE instead of re-reading it
    - net: ipa: initialize all filter table slots
    - gen_compile_commands: fix missing 'sys' package
    - vhost_net: fix OoB on sendmsg() failure.
    - net/af_unix: fix a data-race in unix_dgram_poll
    - net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
    - x86/uaccess: Fix 32-bit __get_user_asm_u64() when CC_HAS_ASM_GOTO_OUTPUT=y
    - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
    - selftest: net: fix typo in altname test
    - qed: Handle management FW error
    - udp_tunnel: Fix udp_tunnel_nic work-queue type
    - dt-bindings: arm: Fix Toradex compatible typo
    - ibmvnic: check failover_pending in login response
    - KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing
      registers
    - bnxt_en: make bnxt_free_skbs() safe to call after bnxt_free_mem()
    - net: hns3: pad the short tunnel frame before sending to hardware
    - net: hns3: change affinity_mask to numa node range
    - net: hns3: disable mac in flr process
    - net: hns3: fix the timing issue of VF clearing interrupt sources
    - dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation
    - mfd: db8500-prcmu: Adjust map to reality
    - PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms
    - fuse: fix use after free in fuse_read_interrupt()
    - PCI: tegra194: Fix handling BME_CHGED event
    - PCI: tegra194: Fix MSI-X programming
    - PCI: tegra: Fix OF node reference leak
    - mfd: Don't use irq_create_mapping() to resolve a mapping
    - PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe()
    - tracing/probes: Reject events which have the same name of existing one
    - PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
    - PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet
      state
    - PCI: j721e: Add PCIe support for J7200
    - PCI: j721e: Add PCIe support for AM64
    - PCI: Add ACS quirks for Cavium multi-function devices
    - watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if
      appropriate
    - octeontx2-af: Add additional register check to rvu_poll_reg()
    - Set fc_nlinfo in nh_create_ipv4, nh_create_ipv6
    - net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920
    - PCI: ibmphp: Fix double unmap of io_mem
    - ethtool: Fix an error code in cxgb2.c
    - NTB: Fix an error code in ntb_msit_probe()
    - NTB: perf: Fix an error code in perf_setup_inbuf()
    - mfd: axp20x: Update AXP288 volatile ranges
    - backlight: ktd253: Stabilize backlight
    - PCI: of: Don't fail devm_pci_alloc_host_bridge() on missing 'ranges'
    - PCI: iproc: Fix BCMA probe resource handling
    - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
    - KVM: arm64: Restrict IPA size to maximum 48 bits on 4K and 16K page size
    - PCI: Fix pci_dev_str_match_path() alloc while atomic bug
    - mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
    - tracing/boot: Fix a hist trigger dependency for boot time tracing
    - mtd: mtdconcat: Judge callback existence based on the master
    - mtd: mtdconcat: Check _read, _write callbacks existence before assignment
    - KVM: arm64: Fix read-side race on updates to vcpu reset state
    - KVM: arm64: Handle PSCI resets before userspace touches vCPU state
    - PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
    - mtd: rawnand: cafe: Fix a resource leak in the error handling path of
      'cafe_nand_probe()'
    - ARC: export clear_user_page() for modules
    - perf unwind: Do not overwrite FEATURE_CHECK_LDFLAGS-libunwind-{x86,aarch64}
    - perf bench inject-buildid: Handle writen() errors
    - gpio: mpc8xxx: Fix a resources leak in the error handling path of
      'mpc8xxx_probe()'
    - gpio: mpc8xxx: Use 'devm_gpiochip_add_data()' to simplify the code and avoid
      a leak
    - net: dsa: tag_rtl4_a: Fix egress tags
    - selftests: mptcp: clean tmp files in simult_flows
    - net: hso: add failure handler for add_net_device
    - net: dsa: b53: Fix calculating number of switch ports
    - net: dsa: b53: Set correct number of ports in the DSA struct
    - netfilter: socket: icmp6: fix use-after-scope
    - fq_codel: reject silly quantum parameters
    - qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom
    - ip_gre: validate csum_start only on pull
    - net: dsa: b53: Fix IMP port setup on BCM5301x
    - bnxt_en: fix stored FW_PSID version masks
    - bnxt_en: Fix asic.rev in devlink dev info command
    - bnxt_en: Fix possible unintended driver initiated error recovery
    - mfd: lpc_sch: Rename GPIOBASE to prevent build error
    - net: renesas: sh_eth: Fix freeing wrong tx descriptor
    - x86/mce: Avoid infinite loop for copy from user recovery
    - bnxt_en: Fix error recovery regression
    - net: dsa: bcm_sf2: Fix array overrun in bcm_sf2_num_active_ports()
    - net: stmmac: fix MAC not working when system resume back with WoL active
    - swiotlb-xen: avoid double free
    - swiotlb-xen: fix late init retry
    - drm/amd/display: Get backlight from PWM if DMCU is not initialized
    - drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3
    - drm/amdgpu: use IS_ERR for debugfs APIs
    - drm/amdgpu: add amdgpu_amdkfd_resume_iommu
    - drm/amdgpu: move iommu_resume before ip init/resume
    - drm/amdkfd: separate kfd_iommu_resume from kfd_resume
    - io_uring: allow retry for O_NONBLOCK if async is supported
    - net: qrtr: revert check in qrtr_endpoint_post()
    - rtc: cmos: Disable irq around direct invocation of cmos_interrupt()
    - drm/i915/dp: return proper DPRX link training result
    - net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume
    - powerpc/mce: Fix access error in mce handler
    - net/mlx5e: Fix mutual exclusion between CQE compression and HW TS
    - net: dsa: lantiq_gswip: Add 200ms assert delay
    - remoteproc: qcom: wcnss: Fix race with iris probe
    - riscv: fix the global name pfn_base confliction error
    - KVM: arm64: Make hyp_panic() more robust when protected mode is enabled
    - flow: fix object-size-mismatch warning in flowi{4,6}_to_flowi_common()
    - net: phylink: add suspend/resume support
    - PCI/PTM: Remove error message at boot
    - perf config: Fix caching and memory leak in perf_home_perfconfig()
    - gpio: mpc8xxx: Fix a potential double iounmap call in 'mpc8xxx_probe()'
    - io_uring: retry in case of short read on block device
    - tools build: Fix feature detect clean for out of source builds
    - mptcp: Only send extra TCP acks in eligible socket states
    - iwlwifi: move get pnvm file name to a separate function
    - iwlwifi: pnvm: Fix a memory leak in 'iwl_pnvm_get_from_fs()'
  * Impish update: v5.13.19 upstream stable release (LP: #1947191)
    - rtc: tps65910: Correct driver module alias
    - btrfs: wake up async_delalloc_pages waiters after submit
    - btrfs: wait on async extents when flushing delalloc
    - btrfs: reduce the preemptive flushing threshold to 90%
    - btrfs: zoned: fix block group alloc_offset calculation
    - btrfs: zoned: suppress reclaim error message on EAGAIN
    - btrfs: fix upper limit for max_inline for page size 64K
    - btrfs: reset replace target device to allocation state on close
    - btrfs: zoned: fix double counting of split ordered extent
    - blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
    - blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
    - PCI/MSI: Skip masking MSI-X on Xen PV
    - powerpc/perf/hv-gpci: Fix counter value parsing
    - xen: fix setting of max_pfn in shared_info
    - 9p/xen: Fix end of loop tests for list_for_each_entry
    - ceph: fix dereference of null pointer cf
    - Input: elan_i2c - reduce the resume time for controller in Whitebox
    - selftests/ftrace: Fix requirement check of README file
    - tools/thermal/tmon: Add cross compiling support
    - clk: socfpga: agilex: fix the parents of the psi_ref_clk
    - clk: socfpga: agilex: fix up s2f_user0_clk representation
    - clk: socfpga: agilex: add the bypass register for s2f_usr0 clock
    - pinctrl: stmfx: Fix hazardous u8[] to unsigned long cast
    - pinctrl: ingenic: Fix incorrect pull up/down info
    - pinctrl: ingenic: Fix bias config for X2000(E)
    - soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
    - soc: qcom: aoss: Fix the out of bound usage of cooling_devs
    - soc: aspeed: lpc-ctrl: Fix boundary check for mmap
    - soc: aspeed: p2a-ctrl: Fix boundary check for mmap
    - arm64: Move .hyp.rodata outside of the _sdata.._edata range
    - arm64: mm: Fix TLBI vs ASID rollover
    - arm64: head: avoid over-mapping in map_memory
    - arm64: Do not trap PMSNEVFR_EL1
    - iio: ltc2983: fix device probe
    - wcn36xx: Ensure finish scan is not requested before start scan
    - crypto: public_key: fix overflow during implicit conversion
    - block: bfq: fix bfq_set_next_ioprio_data()
    - power: supply: max17042: handle fails of reading status register
    - dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()
    - crypto: ccp - shutdown SEV firmware on kexec
    - spi: fsi: Reduce max transfer size to 8 bytes
    - VMCI: fix NULL pointer dereference when unmapping queue pair
    - media: uvc: don't do DMA on stack
    - media: rc-loopback: return number of emitters rather than error
    - nvmem: core: fix error handling while validating keepout regions
    - s390/qdio: fix roll-back after timeout on ESTABLISH ccw
    - s390/qdio: cancel the ESTABLISH ccw after timeout
    - Revert "dmaengine: imx-sdma: refine to load context only once"
    - dmaengine: imx-sdma: remove duplicated sdma_load_context
    - io_uring: place fixed tables under memcg limits
    - io_uring: add ->splice_fd_in checks
    - io_uring: fix io_try_cancel_userdata race for iowq
    - io-wq: fix wakeup race when adding new work
    - io-wq: fix race between adding work and activating a free worker
    - io_uring: fail links of cancelled timeouts
    - libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
    - ARM: 9105/1: atags_to_fdt: don't warn about stack size
    - f2fs: fix to do sanity check for sb/cp fields correctly
    - PCI/portdrv: Enable Bandwidth Notification only if port supports it
    - PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported
    - PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure
    - PCI: xilinx-nwl: Enable the clock through CCF
    - PCI: aardvark: Configure PCIe resources from 'ranges' DT property
    - PCI: aardvark: Fix checking for PIO status
    - PCI: aardvark: Increase polling delay to 1.5s while waiting for PIO response
    - PCI: aardvark: Fix masking and unmasking legacy INTx interrupts
    - f2fs: compress: fix to set zstd compress level correctly
    - HID: input: do not report stylus battery state as "full"
    - f2fs: quota: fix potential deadlock
    - pinctrl: armada-37xx: Correct PWM pins definitions
    - scsi: bsg: Remove support for SCSI_IOCTL_SEND_COMMAND
    - clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types
    - IB/hfi1: Adjust pkey entry in index 0
    - RDMA/iwcm: Release resources if iw_cm module initialization fails
    - docs: Fix infiniband uverbs minor number
    - scsi: BusLogic: Use %X for u32 sized integer rather than %lX
    - pinctrl: samsung: Fix pinctrl bank pin count
    - f2fs: restructure f2fs page.private layout
    - f2fs: compress: add compress_inode to cache compressed blocks
    - f2fs: fix wrong checkpoint_changed value in f2fs_remount()
    - vfio: Use config not menuconfig for VFIO_NOIOMMU
    - scsi: ufs: Fix memory corruption by ufshcd_read_desc_param()
    - cpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwards
    - powerpc/stacktrace: Include linux/delay.h
    - RDMA/hns: Don't overwrite supplied QP attributes
    - RDMA/efa: Remove double QP type assignment
    - RDMA/mlx5: Delete not-available udata check
    - cpuidle: pseries: Mark pseries_idle_proble() as __init
    - f2fs: reduce the scope of setting fsck tag when de->name_len is zero
    - openrisc: don't printk() unconditionally
    - dma-debug: fix debugfs initialization order
    - xprtrdma: Put rpcrdma_reps before waking the tear-down completion
    - NFSv4/pNFS: Fix a layoutget livelock loop
    - NFSv4/pNFS: Always allow update of a zero valued layout barrier
    - NFSv4/pnfs: The layout barrier indicate a minimal value for the seqid
    - SUNRPC: Fix potential memory corruption
    - SUNRPC/xprtrdma: Fix reconnection locking
    - SUNRPC query transport's source port
    - sunrpc: Fix return value of get_srcport()
    - scsi: fdomain: Fix error return code in fdomain_probe()
    - pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
    - powerpc/numa: Consider the max NUMA node for migratable LPAR
    - scsi: smartpqi: Fix an error code in pqi_get_raid_map()
    - scsi: qedi: Fix error codes in qedi_alloc_global_queues()
    - scsi: qedf: Fix error codes in qedf_alloc_global_queues()
    - powerpc/config: Renable MTD_PHYSMAP_OF
    - f2fs: fix to keep compatibility of fault injection interface
    - iommu/vt-d: Update the virtual command related registers
    - RDMA/hns: Fix return in hns_roce_rereg_user_mr()
    - HID: amd_sfh: Fix period data field to enable sensor
    - HID: i2c-hid: Fix Elan touchpad regression
    - HID: thrustmaster: clean up Makefile and adapt quirks
    - clk: imx8mm: use correct mux type for clkout path
    - clk: imx8m: fix clock tree update of TF-A managed clocks
    - KVM: PPC: Book3S HV: Fix copy_tofrom_guest routines
    - scsi: ufs: ufs-exynos: Fix static checker warning
    - KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest SPRs
      are live
    - powerpc/perf: Fix the check for SIAR value
    - RDMA/hns: Bugfix for data type of dip_idx
    - RDMA/hns: Bugfix for the missing assignment for dip_idx
    - platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from
      run_smbios_call
    - powerpc/smp: Fix a crash while booting kvm guest with nr_cpus=2
    - powerpc/smp: Update cpu_core_map on all PowerPc systems
    - RDMA/hns: Fix QP's resp incomplete assignment
    - fscache: Fix cookie key hashing
    - clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
    - clk: at91: clk-generated: Limit the requested rate to our range
    - KVM: PPC: Fix clearing never mapped TCEs in realmode
    - soc: mediatek: cmdq: add address shift in jump
    - f2fs: fix to account missing .skipped_gc_rwsem
    - f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
    - f2fs: fix to unmap pages from userspace process in punch_hole()
    - f2fs: deallocate compressed pages when error happens
    - f2fs: should put a page beyond EOF when preparing a write
    - MIPS: Malta: fix alignment of the devicetree buffer
    - kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
    - userfaultfd: prevent concurrent API initialization
    - drm/vmwgfx: Fix subresource updates with new contexts
    - drm/vmwgfx: Fix some static checker warnings
    - drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET
    - drm/omap: Follow implicit fencing in prepare_fb
    - drm/amdgpu: Fix amdgpu_ras_eeprom_init()
    - ASoC: ti: davinci-mcasp: Fix DIT mode support
    - ASoC: atmel: ATMEL drivers don't need HAS_DMA
    - media: dib8000: rewrite the init prbs logic
    - media: ti-vpe: cal: fix error handling in cal_camerarx_create
    - media: ti-vpe: cal: fix queuing of the initial buffer
    - libbpf: Fix reuse of pinned map on older kernel
    - drm/vkms: Let shadow-plane helpers prepare the plane's FB
    - x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked
      unstable
    - crypto: mxs-dcp - Use sg_mapping_iter to copy data
    - PCI: Use pci_update_current_state() in pci_enable_device_flags()
    - tipc: keep the skb in rcv queue until the whole data is read
    - net: phy: Fix data type in DP83822 dp8382x_disable_wol()
    - iio: dac: ad5624r: Fix incorrect handling of an optional regulator.
    - iavf: do not override the adapter state in the watchdog task
    - iavf: fix locking of critical sections
    - ARM: dts: qcom: apq8064: correct clock names
    - video: fbdev: kyro: fix a DoS bug by restricting user input
    - drm/ast: Disable fast reset after DRAM initial
    - netlink: Deal with ESRCH error in nlmsg_notify()
    - net: ipa: fix IPA v4.11 interconnect data
    - Smack: Fix wrong semantics in smk_access_entry()
    - drm: avoid blocking in drm_clients_info's rcu section
    - drm: serialize drm_file.master with a new spinlock
    - drm: protect drm_master pointers in drm_lease.c
    - rcu: Fix macro name CONFIG_TASKS_RCU_TRACE
    - igc: Check if num of q_vectors is smaller than max before array access
    - usb: host: fotg210: fix the endpoint's transactional opportunities
      calculation
    - usb: host: fotg210: fix the actual_length of an iso packet
    - usb: gadget: u_ether: fix a potential null pointer dereference
    - USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable()
    - usb: gadget: composite: Allow bMaxPower=0 if self-powered
    - staging: board: Fix uninitialized spinlock when attaching genpd
    - staging: hisilicon,hi6421-spmi-pmic.yaml: fix patternProperties
    - tty: serial: jsm: hold port lock when reporting modem line changes
    - bus: fsl-mc: fix arg in call to dprc_scan_objects()
    - bus: fsl-mc: fix mmio base address for child DPRCs
    - misc/pvpanic-pci: Allow automatic loading
    - selftests: firmware: Fix ignored return val of asprintf() warn
    - drm/amd/display: Fix timer_per_pixel unit error
    - media: hantro: vp8: Move noisy WARN_ON to vpu_debug
    - media: platform: stm32: unprepare clocks at handling errors in probe
    - media: atomisp: Fix runtime PM imbalance in atomisp_pci_probe
    - media: atomisp: pci: fix error return code in atomisp_pci_probe()
    - nfp: fix return statement in nfp_net_parse_meta()
    - ethtool: improve compat ioctl handling
    - drm/amdgpu: Fix a printing message
    - drm/amd/amdgpu: Update debugfs link_settings output link_rate field in hex
    - bpf/tests: Fix copy-and-paste error in double word test
    - bpf/tests: Do not PASS tests without actually testing the result
    - drm/bridge: nwl-dsi: Avoid potential multiplication overflow on 32-bit
    - arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names
    - video: fbdev: asiliantfb: Error out if 'pixclock' equals zero
    - video: fbdev: kyro: Error out if 'pixclock' equals zero
    - video: fbdev: riva: Error out if 'pixclock' equals zero
    - net: ipa: fix ipa_cmd_table_valid()
    - ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()
    - flow_dissector: Fix out-of-bounds warnings
    - s390/jump_label: print real address in a case of a jump label bug
    - s390: make PCI mio support a machine flag
    - serial: 8250: Define RX trigger levels for OxSemi 950 devices
    - xtensa: ISS: don't panic in rs_init
    - hvsi: don't panic on tty_register_driver failure
    - serial: 8250_pci: make setup_port() parameters explicitly unsigned
    - staging: ks7010: Fix the initialization of the 'sleep_status' structure
    - samples: bpf: Fix tracex7 error raised on the missing argument
    - libbpf: Fix race when pinning maps in parallel
    - ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()
    - drm: rcar-du: Shutdown the display on system shutdown
    - Bluetooth: skip invalid hci_sync_conn_complete_evt
    - workqueue: Fix possible memory leaks in wq_numa_init()
    - ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM
    - ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx
    - ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check
    - netfilter: nft_compat: use nfnetlink_unicast()
    - bonding: 3ad: fix the concurrency between __bond_release_one() and
      bond_3ad_state_machine_handler()
    - ARM: dts: at91: use the right property for shutdown controller
    - arm64: tegra: Fix Tegra194 PCIe EP compatible string
    - ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the
      matching in-/output
    - ASoC: Intel: update sof_pcm512x quirks
    - Bluetooth: Fix not generating RPA when required
    - dpaa2-switch: do not enable the DPSW at probe time
    - media: imx258: Rectify mismatch of VTS value
    - media: imx258: Limit the max analogue gain to 480
    - media: imx: imx7-media-csi: Fix buffer return upon stream start failure
    - media: v4l2-dv-timings.c: fix wrong condition in two for-loops
    - media: TDA1997x: fix tda1997x_query_dv_timings() return value
    - media: tegra-cec: Handle errors of clk_prepare_enable()
    - gfs2: Fix glock recursion in freeze_go_xmote_bh
    - arm64: dts: qcom: sdm630: Rewrite memory map
    - arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration
    - net: ipa: fix IPA v4.9 interconnects
    - serial: 8250_omap: Handle optional overrun-throttle-ms property
    - ARM: dts: imx53-ppd: Fix ACHC entry
    - arm64: dts: qcom: ipq8074: fix pci node reg property
    - arm64: dts: qcom: sdm660: use reg value for memory node
    - arm64: dts: qcom: ipq6018: drop '0x' from unit address
    - arm64: dts: qcom: sdm630: don't use underscore in node name
    - arm64: dts: qcom: msm8994: don't use underscore in node name
    - arm64: dts: qcom: msm8996: don't use underscore in node name
    - arm64: dts: qcom: sm8250: Fix epss_l3 unit address
    - nvmem: qfprom: Fix up qfprom_disable_fuse_blowing() ordering
    - net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()
    - drm/msm: mdp4: drop vblank get/put from prepare/complete_commit
    - drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660
    - drm: xlnx: zynqmp_dpsub: Call pm_runtime_get_sync before setting pixel clock
    - drm: xlnx: zynqmp: release reset to DP controller before accessing DP
      registers
    - drm/amd/display: fix missing writeback disablement if plane is removed
    - drm/amd/display: fix incorrect CM/TF programming sequence in dwb
    - selftests/bpf: Fix xdp_tx.c prog section name
    - drm/vmwgfx: fix potential UAF in vmwgfx_surface.c
    - staging: rtl8723bs: fix right side of condition
    - Bluetooth: schedule SCO timeouts with delayed_work
    - Bluetooth: avoid circular locks in sco_sock_connect
    - drm/msm/dp: reduce link rate if failed at link training 1
    - drm/msm/dp: return correct edid checksum after corrupted edid checksum read
    - drm/msm/dp: do not end dp link training until video is ready
    - net/mlx5: Fix variable type to match 64bit
    - gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable
      access in amdgpu_i2c_router_select_ddc_port()
    - drm/display: fix possible null-pointer dereference in dcn10_set_clock()
    - mac80211: Fix monitor MTU limit so that A-MSDUs get through
    - ARM: tegra: acer-a500: Remove bogus USB VBUS regulators
    - ARM: tegra: tamonten: Fix UART pad setting
    - arm64: tegra: Fix compatible string for Tegra132 CPUs
    - arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic config
    - arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin config
    - arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS
    - arm64: dts: ls1046a: fix eeprom entries
    - nvme-tcp: don't check blk_mq_tag_to_rq when receiving pdu data
    - nvme: code command_id with a genctr for use-after-free validation
    - Bluetooth: Fix handling of LE Enhanced Connection Complete
    - opp: Don't print an error if required-opps is missing
    - serial: sh-sci: fix break handling for sysrq
    - iomap: pass writeback errors to the mapping
    - tcp: enable data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
    - locking/rtmutex: Set proper wait context for lockdep
    - rpc: fix gss_svc_init cleanup on failure
    - iavf: use mutexes for locking of critical sections
    - selftests/bpf: Correctly display subtest skip status
    - selftests/bpf: Fix flaky send_signal test
    - hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
    - staging: rts5208: Fix get_ms_information() heap buffer size
    - selftests: nci: Fix the code for next nlattr offset
    - selftests: nci: Fix the wrong condition
    - net: Fix offloading indirect devices dependency on qdisc order creation
    - kselftest/arm64: mte: Fix misleading output when skipping tests
    - kselftest/arm64: pac: Fix skipping of tests on systems without PAC
    - gfs2: Don't call dlm after protocol is unmounted
    - usb: chipidea: host: fix port index underflow and UBSAN complains
    - lockd: lockd server-side shouldn't set fl_ops
    - drm/exynos: Always initialize mapping in exynos_drm_register_dma()
    - rtl8xxxu: Fix the handling of TX A-MPDU aggregation
    - rtw88: use read_poll_timeout instead of fixed sleep
    - rtw88: wow: build wow function only if CONFIG_PM is on
    - rtw88: wow: fix size access error of probe request
    - octeontx2-pf: Fix NIX1_RX interface backpressure
    - m68knommu: only set CONFIG_ISA_DMA_API for ColdFire sub-arch
    - btrfs: remove racy and unnecessary inode transaction update when using no-
      holes
    - btrfs: tree-log: check btrfs_lookup_data_extent return value
    - soundwire: intel: fix potential race condition during power down
    - ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER
    - ASoC: Intel: Skylake: Fix passing loadable flag for module
    - of: Don't allow __of_attached_node_sysfs() without CONFIG_SYSFS
    - mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP
    - mmc: sdhci-of-arasan: Check return value of non-void funtions
    - mmc: rtsx_pci: Fix long reads when clock is prescaled
    - selftests/bpf: Enlarge select() timeout for test_maps
    - mmc: core: Return correct emmc response in case of ioctl error
    - samples: pktgen: fix to print when terminated normally
    - cifs: fix wrong release in sess_alloc_buffer() failed path
    - Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST
      quirk set"
    - usb: dwc3: imx8mp: request irq after initializing dwc3
    - usb: musb: musb_dsps: request_irq() after initializing musb
    - usbip: give back URBs for unsent unlink requests during cleanup
    - usbip:vhci_hcd USB port can get stuck in the disabled state
    - usb: xhci-mtk: fix use-after-free of mtk->hcd
    - ASoC: rockchip: i2s: Fix regmap_ops hang
    - ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
    - ASoC: soc-pcm: protect BE dailink state changes in trigger
    - drm/amdkfd: Account for SH/SE count when setting up cu masks.
    - nfs: don't atempt blocking locks on nfs reexports
    - nfsd: fix crash on LOCKT on reexported NFSv3
    - iwlwifi: pcie: free RBs during configure
    - iwlwifi: mvm: Do not use full SSIDs in 6GHz scan
    - iwlwifi: mvm: fix a memory leak in iwl_mvm_mac_ctxt_beacon_changed
    - iwlwifi: mvm: avoid static queue number aliasing
    - iwlwifi: mvm: Fix umac scan request probe parameters
    - iwlwifi: mvm: fix access to BSS elements
    - iwlwifi: fw: correctly limit to monitor dump
    - iwlwifi: mvm: Fix scan channel flags settings
    - net/mlx5: DR, fix a potential use-after-free bug
    - net/mlx5: DR, Enable QP retransmission
    - parport: remove non-zero check on count
    - selftests/bpf: Fix potential unreleased lock
    - wcn36xx: Fix missing frame timestamp for beacon/probe-resp
    - ath9k: fix OOB read ar9300_eeprom_restore_internal
    - ath9k: fix sleeping in atomic context
    - net: fix NULL pointer reference in cipso_v4_doi_free
    - fix array-index-out-of-bounds in taprio_change
    - net: w5100: check return value after calling platform_get_resource()
    - net: hns3: clean up a type mismatch warning
    - parisc: fix crash with signals and alloca
    - parisc: Fix compile failure when building 64-bit kernel natively
    - printk/console: Check consistent sequence number when handling race in
      console_unlock()
    - ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
    - scsi: BusLogic: Fix missing pr_cont() use
    - scsi: qla2xxx: Changes to support kdump kernel
    - scsi: qla2xxx: Sync queue idx with queue_pair_map idx
    - mtd: rawnand: intel: Fix error handling in probe
    - cpufreq: powernv: Fix init_chip_info initialization in numa=off
    - s390/pv: fix the forcing of the swiotlb
    - s390/topology: fix topology information when calling cpu hotplug notifiers
    - hugetlb: fix hugetlb cgroup refcounting during vma split
    - mm/memory_hotplug: use "unsigned long" for PFN in zone_for_pfn_range()
    - mm/hmm: bypass devmap pte when all pfn requested flags are fulfilled
    - mm/hugetlb: initialize hugetlb_usage in mm_init
    - mm,vmscan: fix divide by zero in get_scan_count
    - memcg: enable accounting for pids in nested pid namespaces
    - libnvdimm/pmem: Fix crash triggered when I/O in-flight during unbind
    - platform/chrome: cros_ec_proto: Send command again when timeout occurs
    - lib/test_stackinit: Fix static initializer test
    - net: dsa: lantiq_gswip: fix maximum frame length
    - net: stmmac: Fix overall budget calculation for rxtx_napi
    - drm/mgag200: Select clock in PLL update functions
    - drm/msi/mdp4: populate priv->kms in mdp4_kms_init
    - drm/dp_mst: Fix return code on sideband message failure
    - drm/panfrost: Make sure MMU context lifetime is not bound to panfrost_priv
    - drm/amdgpu: Fix BUG_ON assert
    - drm/amdgpu: Fix a deadlock if previous GEM object allocation fails
    - drm/amd/display: Update number of DCN3 clock states
    - drm/amd/display: Update bounding box states (v2)
    - drm/amd/display: setup system context for APUs
    - drm/msm/disp/dpu1: add safe lut config in dpu driver
    - drm/panfrost: Simplify lock_region calculation
    - drm/panfrost: Use u64 for size in lock_region
    - drm/panfrost: Clamp lock region to Bifrost minimum
    - Linux 5.13.19
  * Add l2tp.sh in net from ubuntu_kernel_selftests back (LP: #1934293)
    - Revert "UBUNTU: SAUCE: selftests/net -- disable l2tp.sh test"

-- Juerg Haefliger <juergh@canonical.com>  Fri, 19 Nov 2021 11:41:46 +0100

Changed in linux-raspi (Ubuntu Impish):
status:	Fix Committed → Fix Released

Revision history for this message

Launchpad Janitor (janitor) wrote on 2022-02-02:

Download full text (44.5 KiB)

This bug was fixed in the package linux-raspi - 5.15.0-1002.2

---------------
linux-raspi (5.15.0-1002.2) jammy; urgency=medium

* jammy/linux-raspi: 5.15.0-1002.2 -proposed tracker (LP: #1958834)

  * Packaging resync (LP: #1786013)
    - [Packaging] update Ubuntu.md
    - debian/dkms-versions -- update from kernel-versions (main/master)

  * Kernel fails to boot in ScalingStack (LP: #1959102)
    - [Config] raspi: Set VIRTIO_PCI=m
    - [Config] raspi: Set ACPI=y

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-24)
    (LP: #1958854)
    - brcmfmac: firmware: Fix crash in brcm_alt_fw_path
    - ARM: dts: Remove VL805 USB node from CM4 dts
    - mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
    - pwm: raspberrypi-poe: Add option of being created by MFD or FW
    - power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
    - power: rpi-poe: Add option of being created by MFD or FW
    - defconfigs: Add MFD_RASPBERRYPI_POE_HAT to Pi defconfigs.
    - dtoverlays: Add option for PoE HAT to use Linux I2C instead of FW.
    - drivers: bcm2835_unicam: Disable trigger mode operation
    - arm: Remove spurious .fnend directive
    - drm/vc4: Fix deadlock on DSI device attach error
    - drm/vc4: dsi: Correct max divider to 255 (not 7)
    - defconfig: Add BACKLIGHT_PWM to bcm2709 and bcmrpi defconfigs
    - dtoverlays: Add pwm backlight option to vc4-kms-dpi-generic
    - dtoverlays: Correct [h|v]sync_invert config in vc4-kms-dpi-generic
    - ARM: dts: BCM2711 AON_INTR2 generates IRQ edges
    - update rpi-display-overlay.dts pins for 5.10+

[ Ubuntu: 5.15.0-18.18 ]

  * jammy/linux: 5.15.0-18.18 -proposed tracker (LP: #1958638)
  * CVE-2021-4155
    - xfs: map unwritten blocks in XFS_IOC_{ALLOC, FREE}SP just like fallocate
  * CVE-2022-0185
    - SAUCE: vfs: test that one given mount param is not larger than PAGE_SIZE
  * [UBUNTU 20.04] KVM hardware diagnose data improvements for guest kernel -
    kernel part (LP: #1953334)
    - KVM: s390: add debug statement for diag 318 CPNC data
  * OOB write on BPF_RINGBUF (LP: #1956585)
    - SAUCE: bpf: prevent helper argument PTR_TO_ALLOC_MEM to have offset other
      than 0
  * Miscellaneous Ubuntu changes
    - [Config] re-enable shiftfs
    - [SAUCE] shiftfs: support kernel 5.15
    - [Config] update toolchain versions
  * Miscellaneous upstream changes
    - vfs: fs_context: fix up param length parsing in legacy_parse_param

linux-raspi (5.15.0-1001.1) jammy; urgency=medium

* Missing overlays/README (LP: #1954757)
- SAUCE: Install overlays/README

* dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454)
- SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart2-5

This bug was fixed in the package linux-raspi - 5.15.0-1002.2

---------------
linux-raspi (5.15.0-1002.2) jammy; urgency=medium

* jammy/linux-raspi: 5.15.0-1002.2 -proposed tracker (LP: #1958834)

* Packaging resync (LP: #1786013)
    - [Packaging] update Ubuntu.md
    - debian/dkms-versions -- update from kernel-versions (main/master)

* Kernel fails to boot in ScalingStack (LP: #1959102)
    - [Config] raspi: Set VIRTIO_PCI=m
    - [Config] raspi: Set ACPI=y

[ Ubuntu: 5.15.0-18.18 ]

linux-raspi (5.15.0-1001.1) jammy; urgency=medium

* Missing overlays/README (LP: #1954757)
    - SAUCE: Install overlays/README

* dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454)
    - SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart2-5

* jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-14)
    (LP: #1958146)
    - clk: bcm-2835: Pick the closest clock rate
    - clk: bcm-2835: Remove rounding up the dividers
    - drm/vc4: hdmi: Set a default HSM rate
    - drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
    - drm/vc4: hdmi: Make sure the controller is powered in detect
    - drm/vc4: hdmi: Make sure the controller is powered up during bind
    - drm/vc4: hdmi: Rework the pre_crtc_configure error handling
    - drm/vc4: hdmi: Split the CEC disable / enable functions in two
    - drm/vc4: hdmi: Make sure the device is powered with CEC
    - drm/vc4: hdmi: Warn if we access the controller while disabled
    - drm/vc4: crtc: Make sure the HDMI controller is powered when disabling
    - drm/vc4: crtc: Drop feed_txp from state
    - drm/vc4: Fix non-blocking commit getting stuck forever
    - drm/vc4: crtc: Copy assigned channel to the CRTC
    - drm/vc4: hdmi: Add a spinlock to protect register access
    - drm/vc4: hdmi: Use a mutex to prevent concurrent framework access
    - drm/vc4: hdmi: Prevent access to crtc->state outside of KMS
    - drm/vc4: hdmi: Check the device state in prepare()
    - drm/vc4: hdmi: Introduce an output_enabled flag
    - drm/vc4: hdmi: Introduce a scdc_enabled flag
    - drm/vc4: hdmi: Remove the DDC probing for status detection
    - drm/vc4: hdmi: Fix HPD GPIO detection
    - drm/vc4: Make vc4_crtc_get_encoder public
    - drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
    - drm/vc4: crtc: Rework the encoder retrieval code (again)
    - drm/vc4: crtc: Add some logging
    - drm/vc4: Leverage the load tracker on the BCM2711
    - drm/vc4: hdmi: Raise the maximum clock rate
    - drm/vc4: hdmi: Enable the scrambler on reconnection
    - drm/vc4: Increase the core clock based on HVS load
    - drm/vc4: select PM
    - drm/probe-helper: Create a HPD IRQ event helper for a single connector
    - drm/vc4: hdmi: Actually check for the connector status in hotplug
    - firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE
    - drm/vc4: Remove conflicting framebuffers before callind bind_all
    - drm/vc4: Notify the firmware when DRM is in charge
    - arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65
    - Revert "rtc: pcf8523: properly handle oscillator stop bit"
    - Revert "staging: bcm2835-audio: Drop DT dependency"
    - Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"
    - Revert "mailbox: avoid timer start from callback"
    - Revert "Bluetooth: Always request for user confirmation for Just Works (LE
      SC)"
    - Revert "Bluetooth: Always request for user confirmation for Just Works"
    - smsx95xx: fix crimes against truesize
    - smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
    - Allow mac address to be set in smsc95xx
    - cgroup: Disable cgroup "memory" by default
    - Protect __release_resource against resources without parents
    - irq-bcm2836: Avoid "Invalid trigger warning"
    - irqchip: bcm2835: Add FIQ support
    - irqchip: irq-bcm2835: Add 2836 FIQ support
    - spi: spidev: Completely disable the spidev warning
    - dmaengine: bcm2835: Load driver early and support legacy API
    - rtc: Add SPI alias for pcf2123 driver
    - watchdog: bcm2835: Support setting reboot partition
    - reboot: Use power off rather than busy spinning when halt is requested
    - bcm: Make RASPBERRYPI_POWER depend on PM
    - Register the clocks early during the boot process, so that special/critical
      clocks can get enabled early on in the boot process avoiding the risk of
      disabling a clock, pll_divider or pll when a claiming driver fails to
      install propperly - maybe it needs to defer.
    - bcm2835-rng: Avoid initialising if already enabled
    - clk-bcm2835: Mark used PLLs and dividers CRITICAL
    - clk-bcm2835: Add claim-clocks property
    - clk-bcm2835: Read max core clock from firmware
    - sound: Demote deferral errors to INFO level
    - Update vfpmodule.c
    - i2c: bcm2835: Add debug support
    - irqchip: irq-bcm2836: Remove regmap and syscon use
    - lan78xx: Enable LEDs and auto-negotiation
    - amba_pl011: Don't use DT aliases for numbering
    - amba_pl011: Round input clock up
    - amba_pl011: Insert mb() for correct FIFO handling
    - amba_pl011: Add cts-event-workaround DT property
    - tty: amba-pl011: Add un/throttle support
    - tty: amba-pl011: Avoid rare write-when-full error
    - pinctrl-bcm2835: Set base to 0 give expected gpio numbering
    - Main bcm2708/bcm2709 linux port
    - Add dwc_otg driver
    - bcm2708 framebuffer driver
    - Pulled in the multi frame buffer support from the Pi3 repo
    - fbdev: add FBIOCOPYAREA ioctl
    - Speed up console framebuffer imageblit function
    - dmaengine: Add support for BCM2708
    - MMC: added alternative MMC driver
    - Adding bcm2835-sdhost driver, and an overlay to enable it
    - vc_mem: Add vc_mem driver for querying firmware memory addresses
    - Add /dev/gpiomem device for rootless user GPIO access
    - Add SMI driver
    - Add Chris Boot's i2c driver
    - char: broadcom: Add vcio module
    - firmware: bcm2835: Support ARCH_BCM270x
    - BCM2708: Add core Device Tree support
    - leds: Add the "input" trigger, for pwr_led
    - Added Device IDs for August DVB-T 205
    - Improve __copy_to_user and __copy_from_user performance
    - gpio-poweroff: Allow it to work on Raspberry Pi
    - mfd: Add Raspberry Pi Sense HAT core driver
    - Add support for all the downstream rpi sound card drivers
    - rpi_display: add backlight driver and overlay
    - bcm2835-virtgpio: Virtual GPIO driver
    - OF: DT-Overlay configfs interface
    - brcm: adds support for BCM43341 wifi
    - hci_h5: Don't send conf_req when ACTIVE
    - config: Add default configs
    - ARM64: Round-Robin dispatch IRQs between CPUs.
    - ARM64: Force hardware emulation of deprecated instructions.
    - cache: export clean and invalidate
    - AXI performance monitor driver (#2222)
    - ARM: bcm2835: Set Serial number and Revision
    - dwc-otg: FIQ: Fix "bad mode in data abort handler"
    - ARM: Activate FIQs to avoid __irq_startup warnings
    - i2c-gpio: Also set bus numbers from reg property
    - added capture_clear option to pps-gpio via dtoverlay (#2433)
    - lan78xx: Read initial EEE status from DT
    - hid: Reduce default mouse polling interval to 60Hz
    - Add ability to export gpio used by gpio-poweroff
    - firmware/raspberrypi: Notify firmware of a reboot
    - irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
    - of: configfs: Use of_overlay_fdt_apply API call
    - net: lan78xx: Disable TCP Segmentation Offload (TSO)
    - brcmfmac: Re-enable firmware roaming support
    - lan78xx: Move enabling of EEE into PHY init code
    - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
      MEDIA_SUBDRV_AUTOSELECT
    - firmware: raspberrypi: Add backward compatible get_throttled
    - sc16is7xx: Don't spin if no data received
    - drivers: thermal: step_wise: add support for hysteresis
    - drivers: thermal: step_wise: avoid throttling at hysteresis temperature
      after dropping below it
    - Update issue templates (#2736)
    - net: lan78xx: Support auto-downshift to 100Mb/s
    - firmware: raspberrypi: Report the fw variant during probe
    - lan78xx: Debounce link events to minimize poll storm
    - lan78xx: EEE support is now a PHY property
    - bcm2835-dma: Add support for per-channel flags
    - rtc: rv3028: Add backup switchover mode support
    - lan78xx: use default alignment for rx buffers
    - media: tc358743: Increase FIFO level to 374.
    - media: tc358743: fix connected/active CSI-2 lane reporting
    - media: tc358743: Add support for 972Mbit/s link freq.
    - media: tc358743: Check I2C succeeded during probe.
    - media: adv7180: Default to the first valid input
    - media: adv7180: Add YPrPb support for ADV7282M
    - media: videodev2: Add helper defines for printing FOURCCs
    - dt-bindings: Document BCM283x CSI2/CCP2 receiver
    - MAINTAINERS: Add entry for BCM2835 Unicam driver
    - media: tc358743: Return an appropriate colorspace from tc358743_set_fmt
    - staging: mmal-vchiq: Avoid use of bool in structures
    - staging: mmal-vchiq: Add support for event callbacks.
    - staging: vc04_services: Support sending data to MMAL ports
    - media: videobuf2: Allow exporting of a struct dmabuf
    - staging: mmal-vchiq: Fix client_component for 64 bit kernel
    - clk: clk-bcm2835: Use %zd when printing size_t
    - staging: mmal_vchiq: Add in the Bayer encoding formats
    - staging: mmal-vchiq: Update mmal_parameters.h with recently defined params
    - staging: mmal-vchiq: Free the event context for control ports
    - staging: mmal-vchiq: Fix memory leak in error path
    - w1: w1-gpio: Make GPIO an output for strong pullup
    - arm: bcm2835: Fix FIQ early ioremap
    - arm: bcm2835: DMA can only address 1GB
    - hwrng: iproc-rng200: Add BCM2838 support
    - bcmgenet: constrain max DMA burst length
    - bcmgenet: Better coalescing parameter defaults
    - net: genet: enable link energy detect powerdown for external PHYs
    - spi: bcm2835: enable shared interrupt support
    - clk-bcm2835: Don't wait for pllh lock
    - soc: bcm: bcm2835-pm: Add support for 2711.
    - clk: bcm2835: Add support for setting leaf clock rates while running.
    - clk: bcm2835: Allow reparenting leaf clocks while they're running.
    - usb: add plumbing for updating interrupt endpoint interval state
    - xhci: implement xhci_fixup_endpoint for interval adjustments
    - usbhid: call usb_fixup_endpoint after mangling intervals
    - arm: bcm2835: Add bcm2838 compatible string.
    - drm/v3d: Add support for 2711.
    - drm/v3d: Skip MMU flush if the device is currently off.
    - drm/v3d: Hook up the runtime PM ops.
    - i2c: bcm2835: Set clock-stretch timeout to 35ms
    - clk-bcm2835: Avoid null pointer exception
    - drm/v3d: HACK: gut runtime pm for now.
    - drm/v3d: Clock V3D down when not in use.
    - drivers: char: add chardev for mmap'ing the RPiVid control registers
    - hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
    - Add HDMI1 facility to the driver.
    - net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
    - xhci: Use more event ring segment table entries
    - configs: arm64/bcm2711: Enable V3D
    - arch/arm: Add model string to cpuinfo
    - arch/arm64: Add Revision, Serial, Model to cpuinfo
    - media: dt-bindings: Add binding for the Sony IMX219 sensor
    - v4l2: Add a Greyworld AWB mode.
    - staging: bcm2835-camera: Add greyworld AWB mode
    - drm/v3d: Delete pm_runtime support
    - ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible
    - Rename HDMI ALSA device names, check for enable state
    - dt-bindings: Add binding for the Infineon IRS1125 sensor
    - media: i2c: Add a driver for the Infineon IRS1125 depth sensor
    - drm/v3d: Suppress all but the first MMU error
    - drm/v3d: Plug dma_fence leak
    - staging: vchiq_arm: Register vcsm-cma as a platform driver
    - staging: vchiq_arm: Register bcm2835-codec as a platform driver
    - net:phy:2711 Allow ethernet LED mode to be set via device tree
    - v3d_drv: Handle missing clock more gracefully
    - v3d_gem: Kick the clock so firmware knows we are using firmware clock
      interface
    - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks
    - clk-bcm2835: Disable v3d clock
    - staging: vchiq_arm: Set up dma ranges on child devices
    - staging: vchiq: Use the old dma controller for OF config on platform devices
    - ARM: bcm: Backport BCM2711 support from upstream
    - Initialise rpi-firmware before clk-bcm2835
    - staging: vchiq_arm: Give vchiq children DT nodes
    - pinctrl: bcm2835: Remove gpiochip on error
    - drivers: char: vcio: Use common compat header
    - video: fbdev: bcm2708_fb: Use common compat header
    - of: overlay: Correct symbol path fixups
    - dt-bindings: pci: Add DT docs for Brcmstb PCIe device
    - bcmgenet: Disable skip_umac_reset by default
    - drm/fourcc: Add packed 10bit YUV 4:2:0 format
    - media: uapi: hevc: Add scaling matrix control
    - media: uapi: hevc: Add segment address field
    - media: videodev2.h: Add a format for column YUV4:2:0 modes
    - media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
    - staging: media: Add Raspberry Pi V4L2 H265 decoder
    - dt-bindings: clock: Add a binding for the RPi Firmware clocks
    - dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
    - drm: Checking of the pitch is only valid for linear formats
    - driver: char: rpivid: Remove legacy name support
    - spi: Force CS_HIGH if GPIO descriptors are used
    - driver: char: rpivid: Don't map more than wanted
    - media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
    - media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type.
    - media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format
    - media: bcm2835-unicam: Add support for mulitple device nodes.
    - media: bcm2835-unicam: Add embedded data node.
    - media: bcm2835-unicam: Use dummy buffer if none have been queued
    - media: bcm2835-unicam: Disable event-related ioctls on metadata node
    - media: bcm2835-unicam: Add support for the FRAME_SYNC event
    - media: bcm2835-unicam: Re-fetch mbus code from subdev on a g_fmt call
    - media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type
    - media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver
    - staging: vchiq: Load bcm2835_isp driver from vchiq
    - bcm2835-dma: Add proper 40-bit DMA support
    - media: bcm2835-unicam: Add support for VIDIOC_[S|G]_SELECTION
    - media: bcm2835-unicam: Do not stop streaming in unicam_release
    - media: bcm2835-unicam: Fix reference counting in unicam_open
    - media: i2c: tc358743: Fix fallthrough warning
    - media: bcm2835: unicam: Fix uninitialized warning
    - video: bcm2708_fb: Disable FB if no displays found
    - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding
    - media: bcm2835-unicam: Always service interrupts
    - sc16is7xx: Fix for hardware flow control
    - staging: vc04_services: mmal-vchiq: Update parameters list
    - staging:vc04_services: bcm2835-camera: Request headers with I-frame
    - media: bcm2835-unicam: Retain packing information on G_FMT
    - zswap: Defer zswap initialisation
    - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
    - snd_bcm2835: disable HDMI audio when vc4 is used (#3640)
    - gpiolib: Don't prevent IRQ usage of output GPIOs
    - PCI: brcmstb: Add DT property to control L1SS
    - media: irs1125: Using i2c_transfer for ic2 reads
    - media: irs1125: Refactoring and debug messages
    - media: irs1125: Atomic access to imager reconfiguration
    - media: irs1125: Keep HW in sync after imager reset
    - staging: bcm2835-audio: Add missing MODULE_ALIAS
    - brcmfmac: Prefer a ccode from OTP over nvram file
    - drivers: media: Remove the downstream version of bcm2835-unicam
    - media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
    - media: bcm2835-unicam: Add support for get_mbus_config to set num lanes
    - media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint
    - media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
    - media: i2c: imx290: Add support for 74.25MHz clock
    - media: i2c: imx290: Correct range for V4L2_CID_GAIN to 0-238
    - media: i2c: imx290: Convert HMAX setting into V4L2_CID_HBLANK
    - media: i2c: imx290: Add support for V4L2_CID_VBLANK
    - media: i2c: imx290: Add exposure control to the driver.
    - media: i2c: imx290: Add H and V flip controls
    - media: dt-bindings: media: i2c: Add mono version to IMX290 bindings
    - media : i2c: imx290: Add support for the mono sensor variant.
    - media: i2c: imx290: Switch set_hmax to use imx290_write_buffered_reg
    - serial: 8250: bcm2835aux - defer if clock is zero
    - media: Add a pixel format for MIPI packed 12bit luma only.
    - media: Add a pixel format for MIPI packed 14bit luma only.
    - media: bcm2835-unicam: Add support for 12bit mono packed format
    - media: bcm2835-unicam: Add support for 14bit mono sources
    - media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats
    - bcm2835-dma: Add NO_WAIT_RESP flag
    - media: i2c: imx290: Explicitly set v&h blank on mode change
    - media: i2c: imx290: Add support for g_selection to report cropping
    - media: i2c: imx290: Set the colorspace fields in the format
    - media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps
    - media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection
    - media: bcm2835: unicam: Set VPU min clock freq to 250Mhz.
    - dt-bindings: bcm2835-unicam: Update documentation with new clock params
    - leds: Add the actpwr trigger
    - bcm2835-dma: Advertise the full DMA range
    - media: bcm2835: unicam: Select MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API
    - staging: media: rpivid: Select MEDIA_CONTROLLER and
      MEDIA_CONTROLLER_REQUEST_API
    - media: bcm2835-unicam: Drop WARN on uing direct cache alias
    - media: i2c: tc358743: Only allow supported pixel fmts in set_fmt
    - dwc_otg: whitelist_table is now productlist_table
    - include/firmware: Add enum for RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID
    - media: i2c: Add driver for Sony IMX477 sensor
    - media: i2c: imx477: Add support for adaptive frame control
    - media: i2c: imx477: Return correct result on sensor id verification
    - media: i2c: imx477: Parse and register properties
    - media: bcm2835-unicam: Always service interrupts
    - media: bcm2835: unicam: Fix uninitialized warning
    - media: bcm2835-unicam: Fixup review comments from Hans.
    - media: bcm2835-unicam: Retain packing information on G_FMT
    - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
    - staging/fbtft: Add support for display variants
    - brcmfmac: Increase power saving delay to 2s
    - rpivid_h265: Fix width/height typo
    - net: bcmgenet: Reset RBUF on first open
    - char: Add broadcom char drivers back to build files
    - dwc_otg: initialise sched_frame for periodic QHs that were parked
    - staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
    - staging: vc04_services: Add new vc-sm-cma driver
    - staging: vchiq-mmal: Add support for 14bit Bayer
    - staging: mmal-vchiq: Add monochrome image formats
    - staging: mmal-vchiq: Use vc-sm-cma to support zero copy
    - staging: vc04_services: Add a V4L2 M2M codec driver
    - bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled
    - uapi: bcm2835-isp: Add bcm2835-isp uapi header file
    - staging: vc04_services: ISP: Add a more complex ISP processing component
    - gpio: Add gpio-fsm driver
    - staging: bcm2835-audio: Add disable-headphones flag
    - rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
    - dwc_otg: Minimise header and fix build warnings
    - rpivid_h625: Fix build warnings
    - bcm2708_fb: Fix a build warning
    - watchdog: bcm2835: Ignore params after the partition number
    - firmware: raspberrypi: Add support for tryonce reboot flag
    - phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
    - phy: broadcom: Add bcm54213pe configuration
    - PCI: brcmstb: Restore initial fundamental reset
    - Input: edt-ft5x06: Poll the device if no interrupt is configured.
    - drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay.
    - drm/panel/raspberrypi-ts: Insert delay before polling for startup state
    - dt-bindings: Add compatible for BCM2711 DSI1
    - media: bcm2835-unicam: Correctly handle error propagation for stream on
    - media: bcm2835-unicam: Return early from stop_streaming() if stopped
    - media: bcm2835-unicam: Clear clock state when stopping streaming
    - PCI: brcmstb: Advertise MSI-X support
    - net: lan78xx: Ack pending PHY ints when resetting
    - media: i2c: imx477: Selection compliance fixes
    - vc-sm-cma: fixed kbuild problem
    - staging/vc04_services: Add additional unpacked raw formats
    - staging/bcm2835-codec: Add the unpacked (16bpp) raw formats
    - staging/bcm2835-codec: Log the number of excess supported formats
    - staging/bcm2835-isp: Add the unpacked (16bpp) raw formats
    - staging/bcm2835-isp: Log the number of excess supported formats
    - bcm2835-dma: Avoid losing CS flags after interrupt
    - arch/arm: Add __memset alias to memset_rpi.S
    - bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags
    - uapi: bcm2835-isp: Add colour denoise configuration
    - staging: vc04_services: ISP: Add colour denoise control
    - spi: bcm2835: Workaround/fix for zero-length transfers
    - kbuild: Silence unavoidable dtc overlay warnings
    - media: i2c: imx290: Replace V4L2_CID_GAIN with V4L2_CID_ANALOGUE_GAIN
    - media: i2c: imx290: Fix number of controls in v4l2_ctrl_handler_init
    - dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
    - staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld
    - bcm2835-isp: Allow formats with different colour spaces.
    - staging: rpivid: Fix crash when CMA alloc fails
    - media: i2c: imx477: Remove auto frame length adjusting
    - media: i2c: imx477: Add very long exposure control to the driver
    - media: i2c: imx290: Fix up exposure calcuations and ranges
    - media: i2c: imx290: Handle exposure correctly when vblank changes
    - media: i2c: imx477: Fix crop height for 2028x1080 mode
    - media: i2c: imx477: Replace existing 1012x760 mode
    - media: i2c: imx477: Remove internal v4l2_mbus_framefmt from the state
    - media: i2c: imx477: Remove unused function parameter
    - media: bcm2835-unicam: Fix bug in buffer swapping logic
    - Assign crypto aliases to different AES implementation modules
    - media/v4l2_m2m: In buffered mode run jobs if either port is streaming
    - staging/bcm2835-codec: Correct logging of size_t to %zu
    - staging/bcm2835-codec: Add support for pixel aspect ratio
    - staging/bcm2835-codec: Implement additional g_selection calls for decode
    - staging/bcm2835-codec: Add VC-1 support.
    - hack: fixup bcm2835-unicam
    - media: i2c: add ov9281 driver.
    - media: i2c: ov9281: fix mclk issue when probe multiple camera.
    - media: i2c: ov9281: add enum_frame_interval function for iq tool 2.2 and
      hal3
    - media: i2c: ov9281: Fixup for recent kernel releases, and remove custom code
    - media: i2c: ov9281: Read chip ID via 2 reads
    - media: i2c: ov9281: Add support for 8 bit readout
    - media: ov9281: Add 1280x720 and 640x480 modes
    - Fixed picture line bug in all ov9281 modes
    - Added hflip and vflip controls to ov9281
    - media: ov5647: Fix return codes from ov5647_write/ov5647_read functions.
    - media: i2c: ov5647: Parse and register properties
    - clk-raspberrypi: Also support HEVC clock
    - rpivid: Request maximum hevc clock
    - staging/bcm2835-camera: Add support for DMABUFs
    - staging: fbtft: Add minipitft13 variant
    - dwc-otg: fix clang -Wignored-attributes warning
    - dwc-otg: fix clang -Wsometimes-uninitialized warning
    - dwc-otg: fix clang -Wpointer-bool-conversion warning
    - staging: vcsm-cma: Fix memory leak from not detaching dmabuf
    - clk: Introduce a clock request API
    - bcm2835-unicam: Switch to new clock api
    - rpivid: Switch to new clock api
    - rpivid: Only clk_request_done once
    - dwc_otg: fix an undeclared variable
    - drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep
    - clk: requests: Ignore if the pointer is null
    - clk: requests: Dereference the request pointer after the check
    - staging/bcm2835-codec: Fix support for levels 4.1 and 4.2
    - staging/bcm2835-codec: Set the colourspace appropriately for RGB formats
    - staging/bcm2835-codec: Pass corrupt frame flag.
    - staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2
    - staging/bcm2835-codec: Do not update crop from S_FMT after res change
    - staging/bcm2835-isp: Fix compiler warning
    - gpio-poweroff: Remember the old poweroff handler
    - media: i2c: ov5647: Correct pixel array offset
    - media: i2c: ov5647: Correct minimum VBLANK value
    - media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
    - media: rpivid: Remove the need to have num_entry_points set
    - media: rpivid: Convert to MPLANE
    - media: rpivid: Add an enable count to irq claim Qs
    - RFC: media: Add media_request_{pin,unpin} API
    - media: rpivid: Add a Pass0 to accumulate slices and rework job finish
    - media: rpivid: Map cmd buffer directly
    - media: rpivid: Improve values returned when setting output format
    - media: rpivid: Improve stream_on/off conformance & clock setup
    - media: rpivid: Improve SPS/PPS error handling/validation
    - bcm2835: Allow compressed frames to set sizeimage (#4386)
    - media: i2c: imx477: Fix for long exposure limit calculations
    - clk: bcm2835: Pass DT node to rpi_firmware_get
    - bcm2835-pcm.c: Support multichannel audio
    - bcm2835-pcm: Fix up multichannel pcm audio
    - media: i2c: imx290: Support 60fps in 2 lane operation
    - media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
    - media: i2c: imx290: Fix clock setup register assignments
    - media: rpivid: Fix H265 aux ent reuse of the same slot
    - media: i2c: ov9281: Remove override of subdev name
    - staging: vc04_services: isp: Set the YUV420/YVU420 format stride to 64 bytes
    - Documentation: devicetree: Add documentation for imx378 sensor
    - media: i2c: imx477: Extend driver to support imx378 sensor
    - dt-bindings: clk: raspberrypi: Remove unused property
    - dt-bindings: display: vc4: Add phandle to the firmware
    - bcm2711_thermal: Don't clamp temperature at zero
    - media: bcm2835-unicam: Forward input status from subdevice
    - media: v4l2-subdev: add subdev-wide state struct
    - drm/vc4: Adopt the dma configuration from the HVS or V3D component
    - Support RPi DPI interface in mode6 for 18-bit color
    - drm/vc4: Add support for DRM_FORMAT_P030 to vc4 planes
    - drm/vc4: Add support for YUV color encodings and ranges
    - drm/vc4: Add FKMS as an acceptable node for dma ranges.
    - drm/vc4: A present but empty dmas disables audio
    - drm/vc4: Add debugfs node that dumps the current display lists
    - drm/vc4: Add all the HDMI registers into the debugfs dumps
    - drm/vc4: Add the 2711 HVS as a suitable DMA node
    - vc4_hdmi: Report that 3d/stereo is allowed
    - vc4: Clear unused infoframe packet RAM registers
    - drm/vc4: Change the default DPI format to being 18bpp, not 24.
    - vc4/drm: Avoid full hdmi audio fifo writes
    - vc4/drm: Fix source offsets with DRM_FORMAT_P030
    - vc4/drm: vc4_plane: Remove subpixel positioning check
    - vc4/kms: vc4_plane: Support 2020 colourspace for yuv planes
    - drm/vc4: hdmi: Convert to the new clock request API
    - drm/vc4: Correct pixel order for DSI0
    - drm/vc4: Register dsi0 as the correct vc4 encoder type
    - drm/vc4: Fix dsi0 interrupt support.
    - drm/vc4: Add correct stop condition to vc4_dsi_encoder_disable iteration
    - drm/atomic: Don't fixup modes that haven't been reset
    - drm/vc4: Allow DBLCLK modes even if horz timing is odd.
    - clk: Always clamp the rounded rate
    - drm/vc4: Increase the core clock based on HVS load
    - drm/vc4: hdmi: Simplify the connector state retrieval
    - drm/vc4: Fix timings for interlaced modes
    - dwc_otg: Update NetBSD usb.h header licence
    - drm/vc4: Fix margin calculations for the right/bottom edges
    - drm/vc4: Fix timings for VEC modes
    - drm/vc4: Refactor VEC TV mode setting
    - drm/vc4: Fix definition of PAL-M mode
    - drm/vc4: Add support for more analog TV standards
    - drm/vc4: Allow setting the TV norm via module parameter
    - drm/vc4: Refactor mode checking logic
    - drm/vc4: Add firmware-kms mode
    - media: i2c: imx477: Fix framerates for 1332x990 mode
    - SQUASH: fbmem: Use fallthrough keyword
    - ASoC: bcm: Compiler warnings in audioinjector-octo
    - media: i2c: tc358743: Fix compiler warning
    - ASoC: bcm: Add chipdip-dac driver
    - drm/vc4: hdmi: Unregister codec device on unbind
    - media: i2c: imx290: Add fwnode properties controls
    - media: i2c: ov9281: Add fwnode properties controls
    - media: i2c: ov7251: Add fwnode properties controls
    - media: v4l2: Remove v4l2-ctrls.c
    - media: v4l2: Add HEVC_SCALING_MATRIX attribute to v4l2-ctrl-*
    - media: rpivid: Update to compile with new hevc decode params
    - media: v4l2: Add Greyworld AWB control name
    - videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
    - v4l2-ctrls: add support for dynamically allocated arrays.
    - media: rpivid: Make slice ctrl dynamic
    - media: rpivid: Only create aux entries for H265 if needed
    - usb: xhci: workaround for bogus SET_DEQ_PENDING endpoint state
    - media: i2c: imx477: Allow control of on-sensor DPC
    - sound/usb: add device quirks for A4Tech FHD 1080p webcams
    - sound/usb: call usb_autopm_get_interface() for devices that should not
    - brcmfmac: Try product-specific clm_blob names first
    - staging: vchiq_arm: Add 36-bit address support
    - staging: vchiq_arm: children inherit DMA config
    - staging: vchiq_arm: Usa a DMA pool for small bulks
    - drm/vc4: Reset HDMI MISC_CONTROL register.
    - drm/vc4: Release workaround buffer and DMA in error paths and unbind
    - drm/vc4: Correct DSI divider calculations
    - drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
    - drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
    - drm/panel/raspberrypi-touchscreen: Handle I2C errors.
    - drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
    - Input: edt-ft54x6: Clean up timer and workqueue on remove
    - regulator: rpi-panel: Register with a unique backlight name
    - regulator: rpi-panel: Handle I2C errors/timing to the Atmel
    - regulator: rpi-panel: Serialise operations.
    - regulator: rpi-panel: Ensure the backlight is off during probe.
    - regulator: rpi-panel: Convert to drive lines directly
    - regulator: rpi-panel: Add GPIO control for panel and touch resets
    - staging/bcm2835-codec: Change the default codec res to 32x32
    - staging/vchiq-mmal: Add buffer flags for interlaced video
    - staging/vchiq-mmal: Add parameters for interlaced video support
    - staging/bcm2835-codec: Add support for decoding interlaced streams
    - staging/bcm2835-codec: Correct ENUM_FRAMESIZES stepsize to 2
    - staging/bcm2835-codec: Return buffers to QUEUED not ERROR state
    - staging/bcm2835_codec: Log MMAL flags in hex
    - staging: bcm2835-codec: Allow custom specified strides/bytesperline.
    - staging/vchiq-mmal: Add the deinterlace image effects enums
    - staging/bcm2835_codec: Add support for image_fx to deinterlace
    - staging/bcm2835-v4l2_codec: Fix for encode selection API
    - Add Raspberry Pi PoE+ HAT support
    - configs: Add CAN_PEAK_USB=m
    - ARM: dts: Restore downstream dtbs to Makefile
    - media: rpivid: Avoid returning EINVAL to a G_FMT ioctl
    - net: phy: lan87xx: Allow more time for link detect
    - media: rpivid: Remove unused ctx state variable and defines
    - media: rpivid: Ensure IRQs have completed before uniniting context
    - staging: bcm2835-codec: Allow decode res changed before STREAMON(CAPTURE)
    - staging/bcm2835-codec: Do not send buffers to the VPU unless streaming
    - staging/mmal-vchiq: Rationalise included headers
    - staging: bcm2835-codec: Format changed should trigger drain
    - staging: bcm2835-codec: Signal the firmware to stop on all changes
    - staging/mmal-vchiq: Add module parameter to enable logging.
    - staging: bcm2835-codec: Queue flushed buffers instead of completing
    - staging: mmal-vchiq: Reset buffers_with_vpu on port_enable
    - staging: bcm2835_codec: Correct flushing code for refcounting
    - staging: bcm2835-codec: Ensure all ctrls are set on streamon
    - staging: bcm2835-codec: Add support for H&V Flips to ISP
    - overlays: add support for the MLX90640 thermal camera
    - overlays: Add generic mcp2515 overlay
    - regulator: rpi-panel: Remove get_brightness hook
    - bcm2835_smi_dev: Fix handling of word-odd lengths
    - Revert "mmc: sdhci-iproc: Fix vmmc regulators on iProc"
    - mmc: sdhci-iproc: Fix vmmc regulators (pre-bcm2711)
    - dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
    - media: i2c: Add driver for IMX519 sensor
    - media: i2c: imx519: Advertise embedded data node on media pad 1
    - configs: Add CONFIG_VIDEO_IMX519=m
    - overlays: Add imx519-overlay.dts
    - dtoverlays: Add overlay for ST7735R (160x128) TinyDRM driver
    - dwc_otg: pay attention to qh->interval when rescheduling periodic queues
    - Hifiberry DAC+ADCPro DT overlay: add optional headphone amp
    - Hifiberry DAC+ADCPro: adding optional headphone amp control
    - Add module for 8111h chip used in various CM4 boards
    - drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller
    - rtc: pcf85063: Always clear EXT_TEST from set_time
    - char: vcio: Rewrite as a firmware node child
    - ARM: dts: Make vcio a child of the firmware node
    - ARM: dts: bcm2835_audio missing firmware reference
    - ARM: dts: Delete vestigial vcsm node
    - config: Enable FSFS_FS_SECURITY
    - gpio: bcm-virt: Fix the get() method
    - configs: Add CONFIG_FB_SIMPLE to bcmrpi3_defconfig
    - media: i2c: imx219: Sensor should report RAW color space
    - media: i2c: imx290: Sensor should report RAW color space
    - media: i2c: imx477: Sensor should report RAW color space
    - media: i2c: imx519: Sensor should report RAW color space
    - media: i2c: ov5647: Sensor should report RAW color space
    - media: i2c: ov9281: Sensor should report RAW color space
    - vc04_services: isp: Report input node as wanting full range RAW color space
    - media/bcm2835-unicam: Parse pad numbers correctly
    - media/bcm2835-unicam: Add support for configuration via MC API
    - ARM: dts: vc4-kms-v3d: Always disable firmware HDMI
    - staging/bcm2835-camera: Add support for H264_MIN_QP, H264_MAX_QP
    - staging/bcm2835-camera: Add support for MPEG_VIDEO_FORCE_KEY_FRAME
    - ARM: dts: Add Pi Zero 2 support
    - clk-raspberrypi: Support VEC clock
    - dt: Move VEC clock to clk-raspberrypi
    - clk-bcm2835: Remove VEC clock support
    - drm/vc4: Add support for gamma on BCM2711
    - drm/vc4: Add debugfs node that dumps the vc5 gamma PWL entries
    - drm/vc4: hvs: Force modeset on gamma lut change
    - media: i2c: imx477: Add vsync trigger_mode parameter
    - drm/vc4: Relax VEC modeline requirements and add progressive mode support
    - drm/vc4: Make VEC progressive modes readily accessible
    - bcm2835-v4l2-codec: Remove advertised support of VP8
    - ARM: dts: Rename Zero 2 W DT files
    - brcmfmac: Don't promote INFO logging to ERR
    - dtoverlays: Update all image sensor overlays for Media Controller option
    - ARM: dt: Add DT nodes for the WLAN interfaces
    - brcmfmac: Read alternative firmware names from DT
    - ARM: dts: Provide WLAN firmware names for Zero 2 W
    - drm: Check whether the gamma lut has changed before updating
    - brcmfmac: Protect against reprobing
    - drm/vc4: kms: Fix return code check
    - drm/vc4: kms: Move clock request to our HVS state
    - overlays: Add fbtft overlay
    - configs: Regenerate defconfigs
    - configs: Add NTFS3 support
    - configs: Add kernel SMB3 server support
    - config: Set TCA8418 to module
    - overlays: Additional parameters for gpio-poweroff
    - configs: Add TCA6416 driver module
    - drm: Fix double free from checking if gamma lut has been updated
    - drm/vc4: Enable gamma block only when required.
    - drm/vc4: Only add gamma properties once.
    - dtoverlays: Remove i2c0mux and i20if status from edt-ft5406.dtsi
    - drm/vc4: Validate the size of the gamma_lut
    - drm/vc4: Don't try disabling SCDC on Pi0-3.
    - enable several virtual devices for hosting virtual machines
    - configs: add CONFIG_HID_PLAYSTATION=m and CONFIG_PLAYSTATION_FF=y
    - configs: add LEDS_PWM=y
    - configs: Add USB gadget support (for Zero 2 W)
    - media: i2c: ov5647: Support HFLIP and VFLIP
    - drivers: bcm2835_isp: Allow multiple users for the ISP driver.
    - drivers: bcm2835_isp: Fix div by 0 bug.
    - Pass V4L2_CID_MPEG_VIDEO_H264_MIN_QP/MAX_QP to bcm2835-v4l2-codec
    - ARM: dts: Update rpi-400 and cm4 dts to match 4-b
    - spi: spidev: Restore loading from Device Tree
    - drm/vc4: Add support for composite syncs to vc4_dpi
    - drm/vc4: Ensure vc4_hdmi doesn't use 2711 HPD registers on Pi0-3
    - ARM: dts: gpio-ranges property is now required
    - input: edt-ft5x06: Handle unreliable TOUCH_UP events
    - dtoverlays: Use edt-ft5506 for 10 points, instead of edt-ft5x06
    - staging/bcm2835-codec: bytesperline for YUV420/YVU420 needs to be 64
    - media: rpivid: remove min_buffers_needed from src queue
    - staging/bcm2835-codec: Allow a different stride alignment per role
    - drivers: bcm2835_unicam: Add logging message when a frame is dropped.
    - regulator/rpi-panel-attiny: Don't read the LCD power status
    - regulator/rpi-panel-attiny: Use two transactions for I2C read
    - input: edt-ft5x06: Only look at the number of points reported
    - drm/vc4: Move HDMI reset to pm_resume
    - clk: bcm: rpi: Add the BCM283x pixel clock.
    - dt: bcm283x: Change BCM283x HDMI to use firmware clock driver
    - Revert "Revert "overlays: vc4-kms-v3d: Change composite handling""
    - drm/panel-simple: Populate bpc when using panel-dpi
    - drm/panel-simple: When using panel-dpi, update desc
    - drm/panel-simple: Allow the bus format to be read from DT for panel-dpi
    - drm/vc4: dpi: Add option for inverting pixel clock and output enable
    - drm/vc4: dpi: Ensure a default format is selected
    - dt: bcm270x: Add GPIO defines for RGB565 DPI output modes
    - dtoverlays: Add a generic DPI panel overlay for KMS
    - xhci: quirks: add link TRB quirk for VL805
    - xhci: correct room_on_ring() for cases where there is a single segment
    - media: imx219: Advertise embedded data node on media pad 1
    - vc4/drm: Ignore vc4_hdmi->output_enabled for allowing audio (#4759)
    - ARM: dts: Create bcm2711-rpi-cm4s.dts (#4761)
    - xhci: refactor out TRBS_PER_SEGMENT define in runtime code
    - usb: xhci: add VLI_TRB_CACHE_BUG quirk
    - drm/vc4: Fix build without DRM_VC4_HDMI_CEC
    - dt: Create static regulators and clocks for camera nodes
    - dtoverlays: Convert the camera sensor overlays to use the new regs and clks.
    - media: i2c: ov5647: Add support for regulator control.
    - dtoverlays: Convert ov5647 to use the regulator framework
    - media: i2c: ov7251: Make the enable GPIO optional.
    - ARM: dts: bcm2711-cm4s Correct i2c0mux to use 0/1 and 28/29 & 2 regulators
    - dtoverlays: Add option to select camera as on CAM0 of CM
    - ASoC:ma120x0p: Increase maximum sample rate to 192KHz
    - staging/bcm2835-isp: Fix cleanup after init fail
    - drm/vc4: kms: Take old state core clock rate into account
    - drm/vc4: hvs: Store channel in variable
    - drm/vc4: hvs: Remove dlist setup duplication
    - drm/vc4: hvs: Move the dlist setup to its own function
    - drm/vc4: hvs: Ignore atomic_flush if we're disabled
    - drm/vc4: plane: Use dlist offset instead of pointer
    - drm/vc4: hvs: Create a shadow dlist
    - drm/vc4: Skip writes to disabled packet RAM
    - drm/edid: Don't clear YUV422 if using deep color
    - drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
    - drm/vc4: hdmi: Add full range RGB helper
    - drm/vc4: hdmi: Use full range helper in csc functions
    - drm/vc4: hdmi: Move XBAR setup to csc_setup
    - drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
    - drm/vc4: hdmi: Define colorspace matrices
    - drm/vc4: hdmi: Change CSC callback prototype
    - drm/vc4: hdmi: Move clock validation to its own function
    - drm/vc4: hdmi: Move clock calculation into its own function
    - drm/vc4: hdmi: Take the sink maximum TMDS clock into account
    - drm/vc4: hdmi: Take bpp into account for the scrambler
    - drm/vc4: hdmi: Always try to have the highest bpc
    - drm/vc4: hdmi: Support HDMI YUV output
    - media: v4l2-ctrls: Add V4L2_CID_NOTIFY_GAINS control
    - media: v4l2-ctrls: Document V4L2_CID_NOTIFY_GAINS control
    - Extending ili9881c driver support for nwe080 panel
    - Enable ili9881 panel and pwm backlight driver by default
    - Add panel overlay for CutiePi
    - dtoverlays: Enable cam1_clock when using tc358743 or irs1125
    - uapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BASE to same as 5.10
    - drm/vc4: hdmi: Fix HDMI monitor detection in polled mode
    - drm/vc4: hdmi: Fix no video output on DVI monitors
    - drm/vc4: Correct interrupt enable bits on hvs4
    - staging/bcm2835-codec: Fix typo
    - media: i2c: ov9281: Increase diff between VTS and max exposure
    - bcm2835-v4l2-isp: Add missing lock initialization
    - configs: Enable Azoteq IQS550/572/525
    - overlays: Add overlay for Azoteq IQS550
    - dtoverlays: Add backlight-gpio parameter to vc4-kms-dpi-generic
    - configs: add CONFIG_LEDS_TRIGGER_PATTERN=m
    - drm/vc4: Fix interrupt masking for HVS5.
    - drm/vc4: Add alpha_blend_mode property to each plane.
    - arm: Fix custom rpi __memset32 and __memset64
    - overlays: Add vl805 overlay
    - arm: Fix annoying .eh_frame section warnings
    - drm/vc4: Disable Gamma control on HVS5 due to issues writing the table
    - drm/vc4: hdmi: Fix clock value used for validating hdmi modes
    - [Config] raspi: updateconfigs after rebase to rpi-5.15.y (2022-01-14)

* Miscellaneous Ubuntu changes
    - [Packaging] raspi: Initial import of debian.raspi from impish:linux-raspi
      (5.13.0-1014.16)
    - [Packaging] raspi: Initial version of linux-raspi for Jammy
    - SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart0
    - SAUCE: arm: dts: Add 'brcm,bcm2835-gpio' compatible for gpio
    - SAUCE: Revert "cgroup: Disable cgroup "memory" by default"

[ Ubuntu: 5.15.0-17.17 ]

* jammy/linux: 5.15.0-17.17 -proposed tracker (LP: #1957809)

linux-raspi (5.15.0-1000.0) jammy; urgency=medium

* Initial version of linux-raspi for Jammy.

-- Juerg Haefliger <juergh@canonical.com>  Fri, 28 Jan 2022 14:42:07 +0100

Changed in linux-raspi (Ubuntu):
status:	New → Fix Released

Report a bug

This report contains Public information

Everyone can see this information.

You are

Subscribing...

Edit bug mail

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.

Ubuntulinux-raspi package

Missing modules in linux-modules

Bug Description

CVE References

Other bug subscribers

Remote bug watches

Ubuntu
linux-raspi package