how do I connect to my wireless internet
I installed 8.10 and can't connect to my wireless cable isp with firefox. I can't find network manager under system>
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu yelp Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Part One
( wireless problem solving specialist here )
Please first connect your network card to the wireless router using a LAN cable.
Then please follow this procedure (in order to gather troubleshooting info):
Step 1: Open Terminal from "Applications-
Terminal"
Step 2: Run the following commands (copy-paste each line below to the Terminal then hit <enter> after each line)
sudo aptitude install hwinfo
hwinfo --netcard
sudo iwlist scanning
sudo lshw -C network
lspci -nn
lsusb
uname -a
dmesg | grep ound
dmesg | grep witch
iwconfig
Step 3: Please post results (copy/paste terminal output from each command) on this thread
Part Two
# Please try this Atheros driver installation procedure:
# First under System/
# Then from a terminal type (press enter key after each line)
sudo aptitude update
sudo aptitude install build-essential subversion
cd ~
mkdir madwifi
cd madwifi
svn co https:/
cd madwifi-
make
sudo make install
sudo gedit /etc/modules
# Now add the Atheros kernel module ath_pci to the list of modules to be automatically loaded at boot by adding
ath_pci
# to the end of the /etc/modules file. (Gedit editor automatically opens)
sudo gedit /etc/modprobe.
# Now add the following line at the end of the /etc/modprobe.
ndiswrapper
Now you can reboot and reactivate your wireless driver and reboot again and it should work.
Hope this helps,
Regards,
Revision history for this message
|
#2 |
Hi, i ask you some info usually asked from Mark Rijckenberg (the wireless specialist here)
Please first connect your network card to the wireless router using a LAN cable.
Then please follow this procedure (in order to gather troubleshooting info):
Step 1: Open Terminal from "Applications-
Terminal"
Step 2: Run the following commands (copy-paste each line below to the Terminal then hit <enter> after each line)
sudo aptitude install hwinfo
hwinfo --netcard
sudo iwlist scanning
sudo lshw -C network
lspci -nn
lsusb
uname -a
dmesg | grep ound
dmesg | grep witch
iwconfig
Step 3: Please post results (copy/paste terminal output from each command) on this thread
Thank you
Revision history for this message
|
#3 |
Will,
I am using another computer to seek help, so I can't copy and paste lines.
I also can't connect with a LAN cable because I don't have one. Should I go ahead and try Part 2 driver installation? Do I need to be onthe internet to find the drivers or did they load with 8.10? Should I reinsert the CD?
Revision history for this message
|
#4 |
go ahead and try part two but first disable your wireless drivers first and reboot your computer. it will be under System/
Revision history for this message
|
#5 |
I got the message "no proprietary drivers in use on this system"
Shall I go ahead with part 2?
Revision history for this message
|
#7 |
wait.............. before you do part two.... go back into System/
Revision history for this message
|
#8 |
Hey will I followed your instructions on the madwifi part and it work perfectly... Even though I didn't ask thank so much for your help. You are a blessing.
Revision history for this message
|
#10 |
@marco and will:
I didnt know that each one is called a specialist here after being at the helm here from 2 years down the lane :-)
(because I think i dont fit here... If all are geeks... :))
Regards
Revision history for this message
|
#11 |
Just install windows and all will be fixed.
------Original Message------
From: Bhavani Shankar
Sender: <email address hidden>
To: <email address hidden>
ReplyTo: <email address hidden>
Subject: Re: [Question #65128]: how do I connect to my wireless internet
Sent: Mar 24, 2009 12:20 AM
Question #65128 on yelp in ubuntu changed:
https:/
Bhavani Shankar proposed the following answer:
@marco and will:
I didnt know that each one is called a specialist here after being at
the helm here from 2 years down the lane :-)
(because I think i dont fit here... If all are geeks... :))
Regards
--
You received this question notification because you are an answer
contact for yelp in ubuntu.
Sent via BlackBerry by AT&T
Revision history for this message
|
#12 |
Hi Schoales,
I highly recommend buying an ethernet cable (LAN cable). It only costs around 5 dollars.
Once you have bought the LAN cable, connect your network card to the wireless router using the new ethernet cable (also known as a LAN cable).
After that, in order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Terminal"
Step 2: Run the following commands (copy-paste each line below to the Terminal then hit <enter> after each line)
sudo aptitude install hwinfo
hwinfo --netcard
sudo iwlist scanning
sudo lshw -C network
lspci -nn
lsusb
uname -a
dmesg | grep ound
dmesg | grep witch
iwconfig
Step 3: Please post results (copy/paste terminal output from each command) on this thread
Step 4: Please also provide us with the exact model and make of PC you are using and post it on this thread
Regards,
Mark
Revision history for this message
|
#13 |
annette@
[sudo] password for annette:
Sorry, try again.
[sudo] password for annette:
Sorry, try again.
[sudo] password for annette:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
hwinfo libhd16{a}
0 packages upgraded, 2 newly installed, 0 to remove and 254 not upgraded.
Need to get 757kB of archives. After unpacking 2,093kB will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://
Get:2 http://
Fetched 757kB in 5s (151kB/s)
Selecting previously deselected package libhd16.
(Reading database ... 114040 files and directories currently installed.)
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhd16 (16.0-1) ...
Setting up hwinfo (16.0-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
annette@
18: PCI 100.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: rBUF.SMQak7ZBX+8
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/
SysFS BusID: 0000:01:00.0
Hardware Class: network
Model: "ASUSTeK L8400B or L3C/S notebook"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8139 "RTL-8139/
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1045 "L8400B or L3C/S notebook"
Revision: 0x10
Driver: "8139too"
Driver Modules: "8139too"
Device File: eth0
I/O Ports: 0xd800-0xd8ff (rw)
Memory Range: 0xfe8fcc00-
IRQ: 20 (20443 events)
HW Address: 00:13:d4:df:92:22
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: 8139too is active
Driver Activation Cmd: "modprobe 8139too"
Driver Info #1:
Driver Status: 8139cp is active
Driver Activation Cmd: "modprobe 8139cp"
Driver Info #2:
Driver Status: epl is not active
Driver Activation Cmd: "modprobe epl"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
23: PCI 103.0: 0282 WLAN controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: y9sn.PRz99XZQLt8
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/
SysFS BusID: 0000:01:03.0
Hardware Class: network
Model: "ASUSTeK A6U notebook embedded card"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4318 "BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x120f "A6U notebook embedded card"
Revision: 0x02
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Device File: wlan0
Features: WLAN
Memory Range: 0xfe8fe000-
IRQ: 22 (no events)
HW Address: 00:13:d4:ce:c0:5a
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
annette@
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
annette@
*-network:0
description: Ethernet interface
product: RTL-8139/
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 10
serial: 00:13:d4:df:92:22
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
resources: irq:20 ioport:
*-network:1
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:01:03.0
version: 02
width: 32 bits
clock: 33MHz
resources: irq:22 memory:
*-network DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:13:d4:ce:c0:5a
annette@
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04)
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/
01:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
01:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
01:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/
01:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
01:03.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
annette@
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 174f:a311 Syntek 1.3MPixel Web Cam - Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 04d9:1503 Holtek Semiconductor, Inc.
Bus 003 Device 002: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
annette@
Linux annette-laptop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
annette@
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.129215] ACPI: No dock devices found.
[ 0.144863] pnp: PnP ACPI: found 12 devices
[ 0.842761] isapnp: No Plug & Play device found
[ 0.868186] hub 1-0:1.0: USB hub found
[ 0.868561] hub 2-0:1.0: USB hub found
[ 0.868853] hub 3-0:1.0: USB hub found
[ 0.869113] hub 4-0:1.0: USB hub found
[ 0.870970] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.873544] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.195261] ssb: Sonics Silicon Backplane found on PCI device 0000:01:03.0
[ 20.704931] lp: driver loaded but no devices found
[ 23.857432] sdhci-pci 0000:01:01.2: SDHCI controller found [1180:0822] (rev 17)
[ 23.949743] yenta_cardbus 0000:01:01.0: CardBus bridge found [1043:1117]
[ 24.267173] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 31.462336] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 31.462421] b43-phy0 ERROR: Firmware file "b43-open/
[ 32.651250] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 32.651333] b43-phy0 ERROR: Firmware file "b43-open/
[ 332.339038] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 332.339046] b43-phy0 ERROR: Firmware file "b43-open/
[ 332.375522] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 332.375530] b43-phy0 ERROR: Firmware file "b43-open/
annette@
[ 0.020973] SMP alternatives: switching to UP code
[ 0.466815] input: Lid Switch as /devices/
[ 0.467023] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.482799] ACPI: Lid Switch [LID]
[ 0.487870] Switched to high resolution mode on CPU 0
[ 2.418423] Console: switching to colour frame buffer device 128x48
annette@
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:""
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Revision history for this message
|
#14 |
Hi Annette,
Please create a separate question using this link:
https:/
Regards,
Mark
Revision history for this message
|
#15 |
joshroberts@
[sudo] password for joshroberts:
artSorry, try again.
[sudo] password for joshroberts:
artoSorry, try again.
[sudo] password for joshroberts:
Sorry, try again.
sudo: 3 incorrect password attempts
joshroberts@
[sudo] password for joshroberts:
artSorry, try again.
[sudo] password for joshroberts:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
hwinfo libhd16{a}
0 packages upgraded, 2 newly installed, 0 to remove and 84 not upgraded.
Need to get 749kB of archives. After unpacking 2,114kB will be used.
Writing extended state information... Done
Get:1 http://
Get:2 http://
Fetched 749kB in 3s (197kB/s)
Selecting previously deselected package libhd16.
(Reading database ... 122144 files and directories currently installed.)
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
joshroberts@
24: PCI 602.0: 0282 WLAN controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: y9sn.1jgFTWqeHhC
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/
SysFS BusID: 0000:06:02.0
Hardware Class: network
Model: "Hewlett-Packard Company Broadcom 802.11b/g WLAN"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4318 "BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x1355 "Broadcom 802.11b/g WLAN"
Revision: 0x02
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Device File: wlan0
Features: WLAN
Memory Range: 0xc0204000-
IRQ: 21 (53907 events)
HW Address: 00:14:a5:7b:18:14
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
29: PCI 606.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: rBUF.qgZcz+lF1Y4
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/
SysFS BusID: 0000:06:06.0
Hardware Class: network
Model: "Realtek RTL-8139/
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8139 "RTL-8139/
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30a4
Revision: 0x10
Driver: "8139too"
Driver Modules: "8139too"
Device File: eth0
I/O Ports: 0xa000-0xafff (rw)
Memory Range: 0xc020a400-
IRQ: 22 (32555 events)
HW Address: 00:16:d4:34:d2:43
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: 8139too is active
Driver Activation Cmd: "modprobe 8139too"
Driver Info #1:
Driver Status: 8139cp is active
Driver Activation Cmd: "modprobe 8139cp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
joshroberts@
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:25:9C:23:E5:F7
Cell 02 - Address: 00:50:F2:CE:57:70
Cell 03 - Address: 86:0B:20:C4:2E:B8
Cell 04 - Address: 00:1B:2F:42:C5:18
joshroberts@
*-network:0
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 2
bus info: pci@0000:06:02.0
version: 02
width: 32 bits
clock: 33MHz
resources: irq:21 memory:
*-network:1
description: Ethernet interface
product: RTL-8139/
vendor: Realtek Semiconductor Co., Ltd.
physical id: 6
bus info: pci@0000:06:06.0
logical name: eth0
version: 10
serial: 00:16:d4:34:d2:43
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
resources: irq:22 ioport:
*-network
description: Wireless interface
physical id: 3
logical name: wlan0
serial: 00:14:a5:7b:18:14
joshroberts@
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 01)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374]
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375]
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373]
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 11)
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376]
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377]
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371]
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 02)
00:14.6 Modem [0703]: ATI Technologies Inc SB400 AC'97 Modem Controller [1002:4378] (rev 02)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) [1002:5955]
06:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
06:04.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
06:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032]
06:04.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
06:04.4 SD Host controller [0805]: Texas Instruments PCI6411/
06:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/
joshroberts@
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
joshroberts@
Linux ubuntu 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 x86_64 GNU/Linux
joshroberts@
[ 0.000000] No NUMA configuration found
[ 0.000000] found SMP MP-table at [ffff8800000f7c50] f7c50
[ 0.000000] No AGP bridge found
[ 0.210753] ACPI: No dock devices found.
[ 0.231551] pnp: PnP ACPI: found 10 devices
[ 0.350385] hub 1-0:1.0: USB hub found
[ 0.424569] hub 2-0:1.0: USB hub found
[ 0.494426] hub 3-0:1.0: USB hub found
[ 0.535515] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.540153] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (1 cpu cores) (version 2.20.00)
[ 0.540915] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.980355] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[ 17.742324] lp: driver loaded but no devices found
[ 18.622826] sdhci-pci 0000:06:04.4: SDHCI controller found [104c:8034] (rev 0)
[ 18.851418] yenta_cardbus 0000:06:04.0: CardBus bridge found [103c:30a4]
[ 19.173318] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
joshroberts@
[ 0.011419] SMP alternatives: switching to UP code
[ 0.218465] Switching to clocksource tsc
[ 0.275357] input: Lid Switch as /devices/
[ 0.275415] ACPI: Lid Switch [LID]
[ 0.281728] Switching to clocksource acpi_pm
[ 20.470654] Console: switching to colour frame buffer device 160x50
joshroberts@
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"rock chalk"
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
joshroberts@
HP Pavillion dv5000
Can you help with this problem?
Provide an answer of your own, or ask schoales for more information if necessary.