Xubuntu: boot is slow

Asked by David Brian on 2011-12-06

Having been advised that Xubuntu 11.10 is used for lower spec machines, After installation boot time is slower than Ubuntu 11.10.Is there a way to speed up boot times as i am a novice user and in need of help.

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu xubuntu-meta Edit question
Assignee:
No assignee Edit question
Last query:
2011-12-06
Last reply:
2011-12-10

Can you reboot and run:

dmesg > ~/dmesg.txt; gedit ~/dmesg.txt

What is the content of the file?

Thanks

David Brian (david-brian) said : #2

I will try above, do you do this from terminal window or from startup options

Terminal window, the file will automatically open too so you can copy and paste the file here

David Brian (david-brian) said : #4

It will be a week before I can try your suggestion but wiil keep you posted.

David Brian (david-brian) said : #5

Thanks for help here is the dmesg file

dmesg
longtonelim@longtonelim-System-Name:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-13-generic (buildd@rothera) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #22-Ubuntu SMP Wed Nov 2 13:25:36 UTC 2011 (Ubuntu 3.0.0-13.22-generic 3.0.6)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000016fec000 (usable)
[ 0.000000] BIOS-e820: 0000000016fec000 - 0000000016fef000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000016fef000 - 0000000016fff000 (reserved)
[ 0.000000] BIOS-e820: 0000000016fff000 - 0000000017000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/A7VC , BIOS ASUS A7VC ACPI BIOS Revision 1002D 07/05/2002
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x16fec max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FFC000000 write-back
[ 0.000000] 2 base 014000000 mask FFE000000 write-back
[ 0.000000] 3 base 016000000 mask FFF000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000016fec000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0016c00000 page 2M
[ 0.000000] 0016c00000 - 0016fec000 page 4k
[ 0.000000] kernel direct mapping tables up to 16fec000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 15749000 - 16449000
[ 0.000000] ACPI: RSDP 000f6850 00014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 16fec000 0002C (v01 ASUS A7VC 30303031 MSFT 31313031)
[ 0.000000] ACPI: FACP 16fec100 00074 (v01 ASUS A7VC 30303031 MSFT 31313031)
[ 0.000000] ACPI: DSDT 16fec180 02974 (v01 ASUS A7VC 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 16fff000 00040
[ 0.000000] ACPI: BOOT 16fec040 00028 (v01 ASUS A7VC 30303031 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 367MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 16fec000
[ 0.000000] low ram: 0 - 16fec000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00016fec
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00016fec
[ 0.000000] On node 0 totalpages: 94075
[ 0.000000] free_area_init_node: node 0, pgdat c17b3280, node_mem_map d6d0b200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 704 pages used for memmap
[ 0.000000] Normal zone: 89388 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 17000000 (gap: 17000000:e7c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @d6800000 s26240 r0 d22912 u4194304
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 93339
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic root=UUID=455cd9cc-12c3-43ea-819d-36c58006923d ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1506752 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 348560k/376752k available (5330k kernel code, 27740k reserved, 2596k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd77ec000 - 0xff7fe000 ( 640 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd6fec000 ( 367 MB)
[ 0.000000] .init : 0xc17be000 - 0xc186c000 ( 696 kB)
[ 0.000000] .data : 0xc1534ac4 - 0xc17bde40 (2596 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1534ac4 (5330 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d5006000 soft=d5008000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1104.257 MHz processor.
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 2208.51 BogoMIPS (lpj=4417028)
[ 0.004037] pid_max: default: 32768 minimum: 301
[ 0.004139] Security Framework initialized
[ 0.004217] AppArmor: AppArmor initialized
[ 0.004223] Yama: becoming mindful.
[ 0.004404] Mount-cache hash table entries: 512
[ 0.005027] Initializing cgroup subsys cpuacct
[ 0.005056] Initializing cgroup subsys memory
[ 0.005100] Initializing cgroup subsys devices
[ 0.005110] Initializing cgroup subsys freezer
[ 0.005118] Initializing cgroup subsys net_cls
[ 0.005128] Initializing cgroup subsys blkio
[ 0.005163] Initializing cgroup subsys perf_event
[ 0.005338] mce: CPU supports 4 MCE banks
[ 0.005669] SMP alternatives: switching to UP code
[ 0.026603] Freeing SMP alternatives: 24k freed
[ 0.026831] ACPI: Core revision 20110413
[ 0.031545] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.032029] ftrace: allocating 24888 entries in 49 pages
[ 0.040792] weird, boot CPU (#0) not listed by the BIOS.
[ 0.040813] SMP motherboard not detected.
[ 0.040818] Local APIC not detected. Using dummy APIC emulation.
[ 0.040824] SMP disabled
[ 0.040837] Performance Events:
[ 0.040850] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.040854] no hardware sampling interrupt available.
[ 0.040870] AMD PMU driver.
[ 0.040893] ... version: 0
[ 0.040897] ... bit width: 48
[ 0.040901] ... generic registers: 4
[ 0.040905] ... value mask: 0000ffffffffffff
[ 0.040909] ... max period: 00007fffffffffff
[ 0.040913] ... fixed-purpose events: 0
[ 0.040917] ... event mask: 000000000000000f
[ 0.044378] Brought up 1 CPUs
[ 0.044403] Total of 1 processors activated (2208.51 BogoMIPS).
[ 0.045461] devtmpfs: initialized
[ 0.046380] PM: Registering ACPI NVS region at 16fff000 (4096 bytes)
[ 0.052394] print_constraints: dummy:
[ 0.052476] Time: 12:55:34 Date: 12/10/11
[ 0.052771] NET: Registered protocol family 16
[ 0.053342] EISA bus registered
[ 0.053415] ACPI: bus type pci registered
[ 0.058089] PCI: PCI BIOS revision 2.10 entry at 0xf0c70, last bus=1
[ 0.058099] PCI: Using configuration type 1 for base access
[ 0.061804] bio: create slab <bio-0> at 0
[ 0.063625] ACPI: EC: Look up EC in DSDT
[ 0.067394] ACPI: Interpreter enabled
[ 0.067433] ACPI: (supports S0 S1 S4 S5)
[ 0.067514] ACPI: Using PIC for interrupt routing
[ 0.082192] ACPI: No dock devices found.
[ 0.082216] HEST: Table not found.
[ 0.082242] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.082655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.083100] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.083110] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.083117] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.083124] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[ 0.083130] pci_root PNP0A03:00: host bridge window [mem 0x17000000-0xffffffff] (ignored)
[ 0.083192] pci 0000:00:00.0: [1106:0305] type 0 class 0x000600
[ 0.083226] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[ 0.083342] pci 0000:00:01.0: [1106:8305] type 1 class 0x000604
[ 0.083388] pci 0000:00:01.0: supports D1
[ 0.083424] pci 0000:00:07.0: [1106:0686] type 0 class 0x000601
[ 0.083530] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[ 0.083576] pci 0000:00:07.1: reg 20: [io 0xd800-0xd80f]
[ 0.083668] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03
[ 0.083712] pci 0000:00:07.2: reg 20: [io 0xd400-0xd41f]
[ 0.083770] pci 0000:00:07.3: [1106:3038] type 0 class 0x000c03
[ 0.083814] pci 0000:00:07.3: reg 20: [io 0xd000-0xd01f]
[ 0.083874] pci 0000:00:07.4: [1106:3057] type 0 class 0x000680
[ 0.084090] pci 0000:00:07.4: quirk: [io 0xe800-0xe80f] claimed by vt82c686 SMB
[ 0.084144] pci 0000:00:07.5: [1106:3058] type 0 class 0x000401
[ 0.084164] pci 0000:00:07.5: reg 10: [io 0xb800-0xb8ff]
[ 0.084177] pci 0000:00:07.5: reg 14: [io 0xb400-0xb403]
[ 0.084189] pci 0000:00:07.5: reg 18: [io 0xb000-0xb003]
[ 0.084281] pci 0000:00:12.0: [10ec:8139] type 0 class 0x000200
[ 0.084300] pci 0000:00:12.0: reg 10: [io 0xa400-0xa4ff]
[ 0.084312] pci 0000:00:12.0: reg 14: [mem 0xee800000-0xee8000ff]
[ 0.084366] pci 0000:00:12.0: supports D1 D2
[ 0.084373] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold
[ 0.084382] pci 0000:00:12.0: PME# disabled
[ 0.084467] pci 0000:01:00.0: [5333:8a26] type 0 class 0x000300
[ 0.084488] pci 0000:01:00.0: reg 10: [mem 0xef000000-0xef07ffff]
[ 0.084500] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.084538] pci 0000:01:00.0: reg 30: [mem 0xefff0000-0xefffffff pref]
[ 0.084562] pci 0000:01:00.0: supports D1 D2
[ 0.084607] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.084620] pci 0000:00:01.0: bridge window [io 0xe000-0xd000] (disabled)
[ 0.084630] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefefffff]
[ 0.084640] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.084654] pci_bus 0000:00: on NUMA node 0
[ 0.084681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.085091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.085292] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.127961] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.128257] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.128395] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.128531] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 0.129135] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.129149] vgaarb: loaded
[ 0.129154] vgaarb: bridge control possible 0000:01:00.0
[ 0.130183] SCSI subsystem initialized
[ 0.130806] libata version 3.00 loaded.
[ 0.131089] usbcore: registered new interface driver usbfs
[ 0.131123] usbcore: registered new interface driver hub
[ 0.131232] usbcore: registered new device driver usb
[ 0.131558] PCI: Using ACPI for IRQ routing
[ 0.131575] PCI: pci_cache_line_size set to 32 bytes
[ 0.131679] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.131688] reserve RAM buffer: 0000000016fec000 - 0000000017ffffff
[ 0.132496] NetLabel: Initializing
[ 0.132508] NetLabel: domain hash size = 128
[ 0.132512] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.132577] NetLabel: unlabeled traffic allowed by default
[ 0.132957] Switching to clocksource pit
[ 0.169773] AppArmor: AppArmor Filesystem Enabled
[ 0.170036] pnp: PnP ACPI init
[ 0.170088] ACPI: bus type pnp registered
[ 0.170397] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.170405] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.170411] pnp 00:00: [mem 0x00100000-0x16ffffff]
[ 0.170417] pnp 00:00: [mem 0xfffe0000-0xffffffff]
[ 0.170422] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.170616] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.170626] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.170638] system 00:00: [mem 0x00100000-0x16ffffff] could not be reserved
[ 0.170646] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.170653] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.170667] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.171312] pnp 00:01: [bus 00-ff]
[ 0.171327] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.171335] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.171340] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.171346] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.171352] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[ 0.171358] pnp 00:01: [mem 0x17000000-0xffffffff window]
[ 0.171606] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.171763] pnp 00:02: [io 0x0010-0x001f]
[ 0.171769] pnp 00:02: [io 0x0022-0x002d]
[ 0.171775] pnp 00:02: [io 0x0030-0x003f]
[ 0.171780] pnp 00:02: [io 0x0044-0x005f]
[ 0.171784] pnp 00:02: [io 0x0062-0x0063]
[ 0.171789] pnp 00:02: [io 0x0065-0x006f]
[ 0.171794] pnp 00:02: [io 0x0074-0x007f]
[ 0.171799] pnp 00:02: [io 0x0091-0x0093]
[ 0.171803] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.171808] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.171813] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.171818] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.172027] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.172036] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.172048] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172130] pnp 00:03: [io 0xe400-0xe47f]
[ 0.172136] pnp 00:03: [io 0xe800-0xe80f]
[ 0.172140] pnp 00:03: [io 0xe200-0xe27f]
[ 0.172231] system 00:03: [io 0xe400-0xe47f] has been reserved
[ 0.172239] system 00:03: [io 0xe800-0xe80f] has been reserved
[ 0.172245] system 00:03: [io 0xe200-0xe27f] has been reserved
[ 0.172253] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172478] pnp 00:04: [dma 4]
[ 0.172484] pnp 00:04: [io 0x0000-0x000f]
[ 0.172489] pnp 00:04: [io 0x0080-0x0090]
[ 0.172496] pnp 00:04: [io 0x0094-0x009f]
[ 0.172501] pnp 00:04: [io 0x00c0-0x00df]
[ 0.172582] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.172617] pnp 00:05: [io 0x0070-0x0073]
[ 0.172636] pnp 00:05: [irq 8]
[ 0.172704] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.172729] pnp 00:06: [io 0x0061]
[ 0.172793] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.172856] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.172864] pnp 00:07: [irq 13]
[ 0.172932] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.173385] pnp 00:08: [io 0x03f2-0x03f5]
[ 0.173393] pnp 00:08: [io 0x03f7]
[ 0.173404] pnp 00:08: [irq 6]
[ 0.173412] pnp 00:08: [dma 2]
[ 0.173569] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.174304] pnp 00:09: [io 0x0378-0x037f]
[ 0.174311] pnp 00:09: [io 0x0778-0x077b]
[ 0.174320] pnp 00:09: [irq 7]
[ 0.174326] pnp 00:09: [dma 3]
[ 0.174531] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.175219] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.175236] pnp 00:0a: [irq 4]
[ 0.175493] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.176086] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.176101] pnp 00:0b: [irq 3]
[ 0.176288] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.176588] pnp 00:0c: [io 0x0060]
[ 0.176595] pnp 00:0c: [io 0x0064]
[ 0.176611] pnp 00:0c: [irq 1]
[ 0.176718] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.176854] pnp 00:0d: [irq 12]
[ 0.176942] pnp 00:0d: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.177114] pnp: PnP ACPI: found 14 devices
[ 0.177123] ACPI: ACPI bus type pnp unregistered
[ 0.177144] PnPBIOS: Disabled by ACPI PNP
[ 0.217861] Switching to clocksource acpi_pm
[ 0.218016] PCI: max bus depth: 1 pci_try_num: 2
[ 0.218099] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.218107] pci 0000:00:01.0: bridge window [io disabled]
[ 0.218125] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefefffff]
[ 0.218138] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.218199] pci 0000:00:01.0: setting latency timer to 64
[ 0.218216] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.218226] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.218233] pci_bus 0000:01: resource 1 [mem 0xef000000-0xefefffff]
[ 0.218239] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref]
[ 0.218550] NET: Registered protocol family 2
[ 0.218845] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.219009] Switched to NOHz mode on CPU #0
[ 0.219831] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.220996] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.222249] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.222269] TCP reno registered
[ 0.222291] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.222378] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.223128] NET: Registered protocol family 1
[ 0.223228] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 0.223249] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.223263] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.223336] pci 0000:01:00.0: Boot video device
[ 0.223342] PCI: CLS 32 bytes, default 32
[ 0.223553] Simple Boot Flag at 0x3a set to 0x1
[ 0.225203] audit: initializing netlink socket (disabled)
[ 0.225296] type=2000 audit(1323521734.221:1): initialized
[ 0.272666] Trying to unpack rootfs image as initramfs...
[ 0.349405] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.361653] VFS: Disk quotas dquot_6.5.2
[ 0.361959] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.369328] fuse init (API version 7.16)
[ 0.370093] msgmni has been set to 680
[ 0.386055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.386484] io scheduler noop registered
[ 0.386491] io scheduler deadline registered
[ 0.386629] io scheduler cfq registered (default)
[ 0.387268] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.387404] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.387995] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.388325] ACPI: Power Button [PWRB]
[ 0.388587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.388597] ACPI: Power Button [PWRF]
[ 0.388684] ACPI: acpi_idle registered with cpuidle
[ 0.409710] ERST: Table is not found!
[ 0.413423] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.434430] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.434683] isapnp: Scanning for PnP cards...
[ 0.569884] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.623024] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.710624] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.734410] Linux agpgart interface v0.103
[ 0.734710] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 0.821594] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 0.832287] brd: module loaded
[ 0.839117] loop: module loaded
[ 0.842304] Fixed MDIO Bus: probed
[ 0.842397] PPP generic driver version 2.4.2
[ 0.842856] tun: Universal TUN/TAP device driver, 1.6
[ 0.842864] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.843417] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.843544] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.843592] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.849937] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.849964] PCI: setting IRQ 11 as level-triggered
[ 0.849990] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.850002] uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 9 to 11
[ 0.850045] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.850325] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 0.850396] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400
[ 0.851255] hub 1-0:1.0: USB hub found
[ 0.851294] hub 1-0:1.0: 2 ports detected
[ 0.851605] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.851622] uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 9 to 11
[ 0.851682] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 0.857033] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 0.857202] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d000
[ 0.858359] hub 2-0:1.0: USB hub found
[ 0.858400] hub 2-0:1.0: 2 ports detected
[ 0.858918] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.865215] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.865321] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.866335] mousedev: PS/2 mouse device common for all mice
[ 0.867107] rtc_cmos 00:05: RTC can wake from S4
[ 0.867516] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.867590] rtc0: alarms up to one year, 242 bytes nvram
[ 0.868438] device-mapper: uevent: version 1.0.3
[ 0.869020] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: <email address hidden>
[ 0.869262] EISA: Probing bus 0 at eisa.0
[ 0.869369] EISA: Detected 0 cards.
[ 0.956748] cpufreq-nforce2: No nForce2 chipset.
[ 0.956759] cpuidle: using governor ladder
[ 0.956763] cpuidle: using governor menu
[ 0.956768] EFI Variables Facility v0.08 2004-May-17
[ 0.957522] TCP cubic registered
[ 0.958185] NET: Registered protocol family 10
[ 0.960001] NET: Registered protocol family 17
[ 1.051819] Registering the dns_resolver key type
[ 1.052179] Using IPI No-Shortcut mode
[ 1.052947] PM: Hibernation image not present or could not be loaded.
[ 1.053033] registered taskstats version 1
[ 1.096891] isapnp: No Plug & Play device found
[ 1.140696] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.256588] usb 1-1: new full speed USB device number 2 using uhci_hcd
[ 1.272401] Refined TSC clocksource calibration: 1104.369 MHz.
[ 1.272459] Switching to clocksource tsc
[ 1.533085] usb 1-2: new full speed USB device number 3 using uhci_hcd
[ 2.080382] Freeing initrd memory: 13312k freed
[ 2.253574] Magic number: 7:949:935
[ 2.254210] rtc_cmos 00:05: setting system clock to 2011-12-10 12:55:37 UTC (1323521737)
[ 2.254231] powernow-k8: Processor cpuid 670 not supported
[ 2.254352] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.254356] EDD information not available.
[ 2.255271] Freeing unused kernel memory: 696k freed
[ 2.262363] Write protecting the kernel text: 5332k
[ 2.262468] Write protecting the kernel read-only data: 2192k
[ 2.429705] udevd[76]: starting version 173
[ 3.485935] Floppy drive(s): fd0 is 1.44M
[ 3.504520] FDC 0 is a post-1991 82077
[ 3.527584] pata_via 0000:00:07.1: version 0.3.4
[ 3.574804] scsi0 : pata_via
[ 3.592400] scsi1 : pata_via
[ 3.594155] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14
[ 3.594177] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15
[ 3.686410] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.686586] 8139cp 0000:00:12.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.769163] ata1.01: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133
[ 3.769181] ata1.01: 160086528 sectors, multi 16: LBA
[ 3.784936] ata1.01: configured for UDMA/100
[ 3.785840] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5
[ 3.787310] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 3.788806] sd 0:0:1:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 3.788996] sd 0:0:1:0: [sda] Write Protect is off
[ 3.789006] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 3.789074] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.798059] usbcore: registered new interface driver uas
[ 3.820692] sda: sda1 sda2 < sda5 >
[ 3.822747] sd 0:0:1:0: [sda] Attached SCSI disk
[ 4.072879] ata2.00: ATAPI: CD-W54E, 1.1B, max MWDMA2
[ 4.072913] ata2.01: ATAPI: CR-48XCTE, 1.0B, max UDMA/33
[ 4.272855] ata2.00: configured for MWDMA2
[ 4.304774] ata2.01: configured for UDMA/33
[ 4.803650] scsi 1:0:0:0: CD-ROM TEAC CD-W54E 1.1B PQ: 0 ANSI: 5
[ 5.103254] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 5.103287] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.103739] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.104712] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.207933] scsi 1:0:1:0: CD-ROM MITSUMI CR-48XCTE 1.0B PQ: 0 ANSI: 5
[ 5.212204] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 5.213105] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 5.214119] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 5.218701] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.219815] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 5.219839] PCI: setting IRQ 10 as level-triggered
[ 5.219862] 8139too 0000:00:12.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 5.231644] Initializing USB Mass Storage driver...
[ 5.238162] 8139too 0000:00:12.0: eth0: RealTek RTL8139 at 0xa400, 00:e0:18:9a:9d:56, IRQ 10
[ 5.250099] scsi2 : usb-storage 1-1:1.0
[ 5.255054] usbcore: registered new interface driver usb-storage
[ 5.255075] USB Mass Storage support registered.
[ 6.257934] scsi 2:0:0:0: Direct-Access Maxtor Basics Desktop 0122 PQ: 0 ANSI: 4
[ 6.266471] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 6.269034] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.272229] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.272262] sd 2:0:0:0: [sdb] Mode Sense: 2d 08 00 00
[ 6.275049] sd 2:0:0:0: [sdb] No Caching mode page present
[ 6.275079] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.287077] sd 2:0:0:0: [sdb] No Caching mode page present
[ 6.287108] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 10.320576] sdb: sdb1
[ 10.335244] sd 2:0:0:0: [sdb] No Caching mode page present
[ 10.335281] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 10.335297] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 20.303359] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 89.557773] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 89.557793] ata1.01: BMDMA stat 0x44
[ 89.557807] ata1.01: failed command: READ DMA
[ 89.557825] ata1.01: cmd c8/00:00:00:b0:38/00:00:00:00:00/f0 tag 0 dma 131072 in
[ 89.557828] res 51/40:00:e1:b0:38/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 89.557836] ata1.01: status: { DRDY ERR }
[ 89.557842] ata1.01: error: { UNC }
[ 89.572530] ata1.01: configured for UDMA/100
[ 89.572595] ata1: EH complete
[ 193.276741] udevd[276]: starting version 173
[ 193.419428] Adding 750588k swap on /dev/sda5. Priority:-1 extents:1 across:750588k
[ 193.639920] lp: driver loaded but no devices found
[ 194.368495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 195.187273] parport_pc: VIA 686A/8231 detected
[ 195.187301] parport_pc: probing current configuration
[ 195.187334] parport_pc: Current parallel port base: 0x378
[ 195.187446] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 195.337260] lp0: using parport0 (interrupt-driven).
[ 195.337293] parport_pc: VIA parallel port: io=0x378, irq=7
[ 196.117328] via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr
[ 196.540019] type=1400 audit(1323521931.781:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=459 comm="apparmor_parser"
[ 196.550043] type=1400 audit(1323521931.793:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
[ 196.550912] type=1400 audit(1323521931.793:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
[ 197.310049] cfg80211: Calling CRDA to update world regulatory domain
[ 197.383850] psmouse serio1: ID: 10 00 64
[ 198.046506] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 198.057891] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 198.057916] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.057922] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 198.057929] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.057935] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 198.057941] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.057947] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 198.057953] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.057958] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 198.057964] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.057970] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 198.057976] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.057981] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 198.057988] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.057993] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 198.058000] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.058005] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 198.058011] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.058017] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 198.058023] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.058029] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 198.058036] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.058042] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 198.058048] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.058054] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 198.058060] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.058065] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 198.058072] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 198.133731] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 198.144500] Registered led device: rt73usb-phy0::radio
[ 198.148433] Registered led device: rt73usb-phy0::assoc
[ 198.151386] Registered led device: rt73usb-phy0::quality
[ 198.161058] usbcore: registered new interface driver rt73usb
[ 199.421672] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 199.421704] PCI: setting IRQ 5 as level-triggered
[ 199.421724] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 199.421949] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ 201.121190] ppdev: user-space parallel port driver
[ 201.617147] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617181] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617191] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617198] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617204] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617210] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617216] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617223] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617228] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617235] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617240] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617247] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617252] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617259] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617264] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617271] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617276] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617282] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617288] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617294] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617299] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617306] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617311] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617318] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617323] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617330] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617335] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 201.617342] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 201.617354] cfg80211: World regulatory domain updated:
[ 201.617359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 201.617368] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 201.617374] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 201.617381] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 201.617387] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 201.617393] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 206.333793] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 206.390692] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 206.390715] vesafb: scrolling: redraw
[ 206.390724] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 206.392695] vesafb: framebuffer at 0xf0000000, mapped to 0xd7a80000, using 5120k, total 5120k
[ 206.406304] Console: switching to colour frame buffer device 160x64
[ 206.406594] fb0: VESA VGA frame buffer device
[ 208.822019] type=1400 audit(1323521944.065:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=741 comm="apparmor_parser"
[ 208.842252] type=1400 audit(1323521944.085:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=741 comm="apparmor_parser"
[ 211.402227] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 211.487585] 8139too 0000:00:12.0: eth0: link down
[ 211.489617] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 213.358770] type=1400 audit(1323521948.601:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=766 comm="apparmor_parser"
[ 213.395460] type=1400 audit(1323521948.637:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=767 comm="apparmor_parser"
[ 213.399181] type=1400 audit(1323521948.641:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=767 comm="apparmor_parser"
[ 213.402024] type=1400 audit(1323521948.645:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=767 comm="apparmor_parser"
[ 213.486016] type=1400 audit(1323521948.729:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=768 comm="apparmor_parser"
[ 213.511208] type=1400 audit(1323521948.753:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=768 comm="apparmor_parser"
[ 213.527268] type=1400 audit(1323521948.769:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=768 comm="apparmor_parser"
[ 213.583271] type=1400 audit(1323521948.825:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=770 comm="apparmor_parser"
[ 215.014832] init: failsafe main process (693) killed by TERM signal
[ 215.082551] init: apport pre-start process (802) terminated with status 1
[ 215.642205] init: apport post-stop process (833) terminated with status 1
[ 217.451645] Bluetooth: Core ver 2.16
[ 217.452347] NET: Registered protocol family 31
[ 217.452358] Bluetooth: HCI device and connection manager initialized
[ 217.452382] Bluetooth: HCI socket layer initialized
[ 217.452391] Bluetooth: L2CAP socket layer initialized
[ 217.466117] Bluetooth: SCO socket layer initialized
[ 217.533067] Bluetooth: RFCOMM TTY layer initialized
[ 217.533121] Bluetooth: RFCOMM socket layer initialized
[ 217.533129] Bluetooth: RFCOMM ver 1.11
[ 217.559359] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 217.559391] Bluetooth: BNEP filters: protocol multicast
[ 218.302995] wlan0: authenticate with 20:2b:c1:6e:88:e5 (try 1)
[ 218.307328] wlan0: authenticated
[ 218.390201] wlan0: associate with 20:2b:c1:6e:88:e5 (try 1)
[ 218.402604] wlan0: RX AssocResp from 20:2b:c1:6e:88:e5 (capab=0x411 status=0 aid=2)
[ 218.402640] wlan0: associated
[ 218.452754] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 219.699098] [drm] Initialized drm 1.1.0 20060810
[ 219.721722] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 219.721768] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 219.728748] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
[ 219.734881] mtrr: base(0xf2000000) is not aligned on a size(0x5000000) boundary
[ 222.182627] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 223.414933] init: plymouth-stop pre-start process (1081) terminated with status 1
[ 229.312057] wlan0: no IPv6 routers present
[ 272.290713] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 356.373270] atkbd serio0: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 356.373291] atkbd serio0: Use 'setkeycodes e001 <keycode>' to make it known.
longtonelim@longtonelim-System-Name:~$

[ 10.335297] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 20.303359] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 89.557773] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0

[ 89.572530] ata1.01: configured for UDMA/100
[ 89.572595] ata1: EH complete
[ 193.276741] udevd[276]: starting version 173

Looks like you drive is causing the slowness. Is it healthy?

David Brian (david-brian) said : #7

Drive could be unhealthy, as was posted on my first post it booted faster on Ubuntu 11.10.Would you recommend I reformat the drive checking for drive errors and then do a fresh install.

Can you help with this problem?

Provide an answer of your own, or ask David Brian for more information if necessary.

To post a message you must log in.