wrong video card description by ubuntu 12.04

Asked by Dragan Raicici on 2012-09-01

Hi. I have a very wierd problem. I get two very different descriptions by Ubuntu if running the commands:
1) /usr/lib/nux/unity_support_test -p

and

2) sudo lshw -C display; lsb_release -a; uname -a

In theory they should be the same. Not for me.....For 1) I get:

OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile
OpenGL version string: 2.1 Mesa 8.0.2

Not software rendered: yes
Not blacklisted: yes
GLX fbconfig: yes
GLX texture from pixmap: yes
GL npot or rect textures: yes
GL vertex program: yes
GL fragment program: yes
GL vertex buffer object: yes
GL framebuffer object: yes
GL version is 1.4+: yes

Unity 3D supported: yes

and for 2) I get:

*-display
       description: VGA compatible controller
       product: Madison [Radeon HD 5000M Series]
       vendor: Hynix Semiconductor (Hyundai Electronics)
       physical id: 0
       bus info: pci@0000:01:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
       configuration: driver=radeon latency=0
       resources: irq:44 memory:f0000000-f7ffffff memory:f8500000-f851ffff ioport:2000(size=256) memory:f8540000-f855ffff
  *-display
       description: VGA compatible controller
       product: Core Processor Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 18
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:45 memory:f8000000-f83fffff memory:d0000000-dfffffff ioport:1800(size=8)
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 12.04.1 LTS
Release: 12.04
Codename: precise
Linux rdgary-Aspire-7745G 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

The main reason for my question is that I am desperately trying to install my graphics card in order to run in ubuntu 3D, and installing the amd catalyst controller from the amd center did not work. After installing and rebooting,it ends up in an error on startup which tells me that the system does not recognize my current graphics configuration and I think that the fact that these 2 commands give different responses might be to blame.
Thank you for your time in reading this looong post.I appreciate it if you could help me in finding a solution for this!

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu xserver-xorg-video-ati Edit question
Assignee:
No assignee Edit question
Last query:
2012-09-01
Last reply:
2012-09-05

Is the system a laptop?

The output is correct. You have a hybrid Intel/ATI GPU setup. There is an integrated Intel IGP (to conserve battery) and a discrete ATI GPU (for more demanding 3D tasks).

It is best not to install the proprietary ATI driver (and it is not needed for basic 3D stuff like desktop effects). Make sure you purge the proprietary driver completely: http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide#Removing_Catalyst.2Ffglrx

 You use vgawitcheroo to switch between the two GPU's: https://help.ubuntu.com/community/HybridGraphics

yes,the system is a laptop.

Dave Lentz, I will try your solution. :) Thank you!

> I still don't have the option of choosing Unity 3D when logging in,just
> the 2D one is available.

Do you have a /var/log/Xorg.0.log file? Post it to your bug.

> I ran a fps test using glxgears and it's pretty poor.
Probably because vsync is on to prevent tearing (60 fps).

 What I'm basically trying to say is....Can I run Ubuntu on my high
 performance GPU?:)

It shouldn't be necessary, but have you looked in your BIOS for a switch to disable the integrated video? The Intel IGP should be able to run Unity with 3D effects.

> Thank you for your time
You're welcome

Sorry, I meantyou should post the /var/log/Xorg.0.log here (this is not a bug report).

I found it! :)
This is the file you requested:

[ 25.534]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 25.534] X Protocol Version 11, Revision 0
[ 25.534] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu
[ 25.534] Current Operating System: Linux rdgary-Aspire-7745G 3.5.3-030503-generic #201208252335 SMP Sun Aug 26 03:35:56 UTC 2012 x86_64
[ 25.534] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.3-030503-generic root=UUID=3f452396-8ad6-4bdb-a37c-d8f8afdd44a8 ro quiet splash vt.handoff=7
[ 25.534] Build Date: 09 July 2012 05:20:18PM
[ 25.534] xorg-server 2:1.12.3+git20120709+server-1.12-branch.60e0d205-0ubuntu0ricotz~precise (For technical support please see http://www.ubuntu.com/support)
[ 25.535] Current version of pixman: 0.26.0
[ 25.535] Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
[ 25.535] Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.535] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 5 08:28:24 2012
[ 25.578] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.618] (==) No Layout section. Using the first Screen section.
[ 25.618] (==) No screen section available. Using defaults.
[ 25.618] (**) |-->Screen "Default Screen Section" (0)
[ 25.618] (**) | |-->Monitor "<default monitor>"
[ 25.618] (==) No monitor specified for screen "Default Screen Section".
 Using a default monitor configuration.
[ 25.618] (==) Automatically adding devices
[ 25.618] (==) Automatically enabling devices
[ 25.641] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 25.641] Entry deleted from font path.
[ 25.641] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 25.641] Entry deleted from font path.
[ 25.641] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 25.641] Entry deleted from font path.
[ 25.642] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 25.642] Entry deleted from font path.
[ 25.642] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 25.642] Entry deleted from font path.
[ 25.642] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 25.642] Entry deleted from font path.
[ 25.642] (==) FontPath set to:
 /usr/share/fonts/X11/misc,
 /usr/share/fonts/X11/Type1,
 built-ins
[ 25.642] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 25.642] (II) The server relies on udev to provide the list of input devices.
 If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.642] (II) Loader magic: 0x7f0755db5b00
[ 25.642] (II) Module ABI versions:
[ 25.642] X.Org ANSI C Emulation: 0.4
[ 25.642] X.Org Video Driver: 12.0
[ 25.642] X.Org XInput driver : 16.0
[ 25.642] X.Org Server Extension : 6.0
[ 25.643] (--) PCI:*(0:0:2:0) 8086:0046:1025:0367 rev 24, Mem @ 0xf8000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 25.643] (--) PCI: (0:1:0:0) 1002:68c1:1025:0367 rev 0, Mem @ 0xf0000000/134217728, 0xf8500000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 25.643] (II) Open ACPI successful (/var/run/acpid.socket)
[ 25.643] (II) LoadModule: "extmod"
[ 25.764] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 25.838] (II) Module extmod: vendor="X.Org Foundation"
[ 25.838] compiled for 1.12.3, module version = 1.0.0
[ 25.838] Module class: X.Org Server Extension
[ 25.838] ABI class: X.Org Server Extension, version 6.0
[ 25.838] (II) Loading extension MIT-SCREEN-SAVER
[ 25.838] (II) Loading extension XFree86-VidModeExtension
[ 25.838] (II) Loading extension XFree86-DGA
[ 25.839] (II) Loading extension DPMS
[ 25.839] (II) Loading extension XVideo
[ 25.839] (II) Loading extension XVideo-MotionCompensation
[ 25.839] (II) Loading extension X-Resource
[ 25.839] (II) LoadModule: "dbe"
[ 25.839] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 25.858] (II) Module dbe: vendor="X.Org Foundation"
[ 25.859] compiled for 1.12.3, module version = 1.0.0
[ 25.859] Module class: X.Org Server Extension
[ 25.859] ABI class: X.Org Server Extension, version 6.0
[ 25.859] (II) Loading extension DOUBLE-BUFFER
[ 25.859] (II) LoadModule: "glx"
[ 25.859] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.886] (II) Module glx: vendor="X.Org Foundation"
[ 25.886] compiled for 1.12.3, module version = 1.0.0
[ 25.886] ABI class: X.Org Server Extension, version 6.0
[ 25.886] (==) AIGLX enabled
[ 25.887] (II) Loading extension GLX
[ 25.887] (II) LoadModule: "record"
[ 25.887] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 25.916] (II) Module record: vendor="X.Org Foundation"
[ 25.916] compiled for 1.12.3, module version = 1.13.0
[ 25.916] Module class: X.Org Server Extension
[ 25.916] ABI class: X.Org Server Extension, version 6.0
[ 25.916] (II) Loading extension RECORD
[ 25.916] (II) LoadModule: "dri"
[ 25.916] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 25.959] (II) Module dri: vendor="X.Org Foundation"
[ 25.959] compiled for 1.12.3, module version = 1.0.0
[ 25.959] ABI class: X.Org Server Extension, version 6.0
[ 25.959] (II) Loading extension XFree86-DRI
[ 25.959] (II) LoadModule: "dri2"
[ 25.960] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.961] (II) Module dri2: vendor="X.Org Foundation"
[ 25.961] compiled for 1.12.3, module version = 1.2.0
[ 25.961] ABI class: X.Org Server Extension, version 6.0
[ 25.961] (II) Loading extension DRI2
[ 25.961] (==) Matched intel as autoconfigured driver 0
[ 25.961] (==) Matched vesa as autoconfigured driver 1
[ 25.961] (==) Matched fbdev as autoconfigured driver 2
[ 25.961] (==) Assigned the driver to the xf86ConfigLayout
[ 25.961] (II) LoadModule: "intel"
[ 25.962] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 26.090] (II) Module intel: vendor="X.Org Foundation"
[ 26.090] compiled for 1.12.3, module version = 2.20.5
[ 26.090] Module class: X.Org Video Driver
[ 26.090] ABI class: X.Org Video Driver, version 12.0
[ 26.090] (II) LoadModule: "vesa"
[ 26.090] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.140] (II) Module vesa: vendor="X.Org Foundation"
[ 26.140] compiled for 1.12.3, module version = 2.3.2
[ 26.140] Module class: X.Org Video Driver
[ 26.140] ABI class: X.Org Video Driver, version 12.0
[ 26.140] (II) LoadModule: "fbdev"
[ 26.141] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.182] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.182] compiled for 1.12.3, module version = 0.4.3
[ 26.182] Module class: X.Org Video Driver
[ 26.182] ABI class: X.Org Video Driver, version 12.0
[ 26.182] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
 i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
 E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
 Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
 Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
 Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
 Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
 Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
 Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
 Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
 Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
 Haswell Server (GT2+), Haswell SDV Desktop (GT1),
 Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
 Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
 Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
 Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
 Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
 Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
 Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
 Haswell ULT Server (GT1), Haswell ULT Server (GT2),
 Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
 Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
 Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
 Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
 Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 26.183] (II) VESA: driver for VESA chipsets: vesa
[ 26.183] (II) FBDEV: driver for framebuffer: fbdev
[ 26.183] (++) using VT number 7

[ 26.183] drmOpenDevice: node name is /dev/dri/card0
[ 26.183] drmOpenDevice: open result is 8, (OK)
[ 26.183] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 26.183] drmOpenDevice: node name is /dev/dri/card0
[ 26.183] drmOpenDevice: open result is 8, (OK)
[ 26.183] drmOpenByBusid: drmOpenMinor returns 8
[ 26.183] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 26.211] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.20.5+git20120830.deaa1cac-0ubuntu0ricotz~precise (Rico Tzschichholz <email address hidden>)
[ 26.211] (WW) Falling back to old probe method for vesa
[ 26.211] (WW) Falling back to old probe method for fbdev
[ 26.211] (II) Loading sub module "fbdevhw"
[ 26.211] (II) LoadModule: "fbdevhw"
[ 26.211] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 26.235] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 26.235] compiled for 1.12.3, module version = 0.0.2
[ 26.235] ABI class: X.Org Video Driver, version 12.0
[ 26.235] drmOpenDevice: node name is /dev/dri/card0
[ 26.235] drmOpenDevice: open result is 9, (OK)
[ 26.235] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 26.235] drmOpenDevice: node name is /dev/dri/card0
[ 26.235] drmOpenDevice: open result is 9, (OK)
[ 26.235] drmOpenByBusid: drmOpenMinor returns 9
[ 26.235] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 26.235] (II) intel(0): Creating default Display subsection in Screen section
 "Default Screen Section" for depth/fbbpp 24/32
[ 26.235] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 26.235] (==) intel(0): RGB weight 888
[ 26.235] (==) intel(0): Default visual is TrueColor
[ 26.235] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 26.236] (**) intel(0): Framebuffer tiled
[ 26.236] (**) intel(0): Pixmaps tiled
[ 26.236] (**) intel(0): 3D buffers tiled
[ 26.291] (**) intel(0): Throttling enabled
[ 26.291] (**) intel(0): Delayed flush enabled
[ 26.291] (**) intel(0): "Tear free" disabled
[ 26.291] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 26.291] (II) intel(0): Output LVDS1 has no monitor section
[ 26.291] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 26.291] (II) intel(0): Output VGA1 has no monitor section
[ 26.291] (II) intel(0): EDID for output LVDS1
[ 26.291] (II) intel(0): Manufacturer: AUO Model: 139e Serial#: 0
[ 26.291] (II) intel(0): Year: 2009 Week: 1
[ 26.291] (II) intel(0): EDID Version: 1.3
[ 26.291] (II) intel(0): Digital Display Input
[ 26.291] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 26.291] (II) intel(0): Gamma: 2.20
[ 26.291] (II) intel(0): No DPMS capabilities specified
[ 26.291] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.291] (II) intel(0): First detailed timing is preferred mode
[ 26.291] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.325 greenY: 0.570
[ 26.291] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 26.291] (II) intel(0): Manufacturer's mask: 0
[ 26.291] (II) intel(0): Supported detailed timing:
[ 26.291] (II) intel(0): clock: 110.0 MHz Image Size: 382 x 214 mm
[ 26.291] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 2000 h_border: 0
[ 26.291] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 912 v_border: 0
[ 26.291] (II) intel(0): Unknown vendor-specific block f
[ 26.291] (II) intel(0): AUO
[ 26.291] (II) intel(0): B173RW01 V3
[ 26.291] (II) intel(0): EDID (in hex):
[ 26.291] (II) intel(0): 00ffffffffffff0006af9e1300000000
[ 26.291] (II) intel(0): 01130103802615780ac4959e57539226
[ 26.291] (II) intel(0): 0f505400000001010101010101010101
[ 26.291] (II) intel(0): 010101010101f82a409061840c303020
[ 26.291] (II) intel(0): 36007ed6100000180000000f00000000
[ 26.291] (II) intel(0): 00000000000000000020000000fe0041
[ 26.291] (II) intel(0): 554f0a202020202020202020000000fe
[ 26.291] (II) intel(0): 004231373352573031205633200a0026
[ 26.291] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 26.291] (II) intel(0): Printing DDC gathered Modelines:
[ 26.291] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)
[ 26.309] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 26.309] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 26.309] (II) intel(0): Printing probed modes for output LVDS1
[ 26.309] (II) intel(0): Modeline "1600x900"x60.3 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)
[ 26.309] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 26.309] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 26.309] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 26.309] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 26.309] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 26.309] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 26.309] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 26.309] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 26.309] (II) intel(0): EDID for output VGA1
[ 26.309] (II) intel(0): Output LVDS1 connected
[ 26.309] (II) intel(0): Output VGA1 disconnected
[ 26.309] (II) intel(0): Using exact sizes for initial modes
[ 26.309] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 26.309] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.309] (**) intel(0): Display dimensions: (380, 210) mm
[ 26.309] (**) intel(0): DPI set to (106, 108)
[ 26.309] (II) Loading sub module "dri2"
[ 26.309] (II) LoadModule: "dri2"
[ 26.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.309] (II) Module dri2: vendor="X.Org Foundation"
[ 26.309] compiled for 1.12.3, module version = 1.2.0
[ 26.309] ABI class: X.Org Server Extension, version 6.0
[ 26.309] (II) UnloadModule: "vesa"
[ 26.309] (II) Unloading vesa
[ 26.309] (II) UnloadModule: "fbdev"
[ 26.309] (II) Unloading fbdev
[ 26.309] (II) UnloadSubModule: "fbdevhw"
[ 26.309] (II) Unloading fbdevhw
[ 26.309] (==) Depth 24 pixmap format is 32 bpp
[ 26.453] (II) intel(0): SNA initialized with Ironlake backend
[ 26.453] (==) intel(0): Backing store disabled
[ 26.453] (==) intel(0): Silken mouse enabled
[ 26.454] (II) intel(0): HW Cursor enabled
[ 26.454] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.454] (==) intel(0): DPMS enabled
[ 26.480] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 26.480] (II) intel(0): [DRI2] Setup complete
[ 26.480] (II) intel(0): [DRI2] DRI driver: i965
[ 26.480] (II) intel(0): direct rendering: DRI2 Enabled
[ 26.480] (==) intel(0): hotplug detection: "enabled"
[ 26.480] (--) RandR disabled
[ 26.480] (II) Initializing built-in extension Generic Event Extension
[ 26.480] (II) Initializing built-in extension SHAPE
[ 26.480] (II) Initializing built-in extension MIT-SHM
[ 26.480] (II) Initializing built-in extension XInputExtension
[ 26.480] (II) Initializing built-in extension XTEST
[ 26.480] (II) Initializing built-in extension BIG-REQUESTS
[ 26.480] (II) Initializing built-in extension SYNC
[ 26.480] (II) Initializing built-in extension XKEYBOARD
[ 26.480] (II) Initializing built-in extension XC-MISC
[ 26.480] (II) Initializing built-in extension SECURITY
[ 26.480] (II) Initializing built-in extension XINERAMA
[ 26.480] (II) Initializing built-in extension XFIXES
[ 26.480] (II) Initializing built-in extension RENDER
[ 26.480] (II) Initializing built-in extension RANDR
[ 26.480] (II) Initializing built-in extension COMPOSITE
[ 26.480] (II) Initializing built-in extension DAMAGE
[ 26.731] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 26.731] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 26.731] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 26.731] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 26.731] (II) AIGLX: Loaded and initialized i965
[ 26.731] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 26.732] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 26.764] (II) intel(0): Setting screen physical size to 423 x 238
[ 27.022] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 27.095] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 27.095] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.095] (II) LoadModule: "evdev"
[ 27.096] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.165] (II) Module evdev: vendor="X.Org Foundation"
[ 27.165] compiled for 1.11.3, module version = 2.7.0
[ 27.165] Module class: X.Org XInput Driver
[ 27.165] ABI class: X.Org XInput driver, version 16.0
[ 27.165] (II) Using input driver 'evdev' for 'Power Button'
[ 27.165] (**) Power Button: always reports core events
[ 27.165] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 27.165] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.165] (--) evdev: Power Button: Found keys
[ 27.165] (II) evdev: Power Button: Configuring as keyboard
[ 27.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 27.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.165] (**) Option "xkb_rules" "evdev"
[ 27.165] (**) Option "xkb_model" "pc105"
[ 27.165] (**) Option "xkb_layout" "us"
[ 27.165] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 27.165] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.165] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.165] (**) Video Bus: always reports core events
[ 27.165] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 27.166] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.166] (--) evdev: Video Bus: Found keys
[ 27.166] (II) evdev: Video Bus: Configuring as keyboard
[ 27.166] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[ 27.166] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.166] (**) Option "xkb_rules" "evdev"
[ 27.166] (**) Option "xkb_model" "pc105"
[ 27.166] (**) Option "xkb_layout" "us"
[ 27.166] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 27.166] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.166] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.166] (**) Video Bus: always reports core events
[ 27.166] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 27.166] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.166] (--) evdev: Video Bus: Found keys
[ 27.166] (II) evdev: Video Bus: Configuring as keyboard
[ 27.166] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8/event8"
[ 27.166] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 27.166] (**) Option "xkb_rules" "evdev"
[ 27.166] (**) Option "xkb_model" "pc105"
[ 27.166] (**) Option "xkb_layout" "us"
[ 27.167] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 27.167] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.167] (II) Using input driver 'evdev' for 'Power Button'
[ 27.167] (**) Power Button: always reports core events
[ 27.167] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 27.167] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.167] (--) evdev: Power Button: Found keys
[ 27.167] (II) evdev: Power Button: Configuring as keyboard
[ 27.167] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 27.167] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 27.167] (**) Option "xkb_rules" "evdev"
[ 27.167] (**) Option "xkb_model" "pc105"
[ 27.167] (**) Option "xkb_layout" "us"
[ 27.167] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 27.167] (II) No input driver specified, ignoring this device.
[ 27.167] (II) This device may have been added with another device file.
[ 27.167] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 27.167] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 27.167] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27.167] (**) Sleep Button: always reports core events
[ 27.167] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 27.167] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 27.167] (--) evdev: Sleep Button: Found keys
[ 27.167] (II) evdev: Sleep Button: Configuring as keyboard
[ 27.167] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 27.167] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 27.167] (**) Option "xkb_rules" "evdev"
[ 27.167] (**) Option "xkb_model" "pc105"
[ 27.167] (**) Option "xkb_layout" "us"
[ 27.168] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[ 27.168] (II) No input driver specified, ignoring this device.
[ 27.168] (II) This device may have been added with another device file.
[ 27.168] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event6)
[ 27.168] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 27.168] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 27.168] (**) 1.3M HD WebCam: always reports core events
[ 27.168] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event6"
[ 27.168] (--) evdev: 1.3M HD WebCam: Vendor 0x4fc Product 0x2801
[ 27.168] (--) evdev: 1.3M HD WebCam: Found keys
[ 27.168] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 27.168] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6/event6"
[ 27.168] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 27.168] (**) Option "xkb_rules" "evdev"
[ 27.168] (**) Option "xkb_model" "pc105"
[ 27.168] (**) Option "xkb_layout" "us"
[ 27.168] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event10)
[ 27.169] (II) No input driver specified, ignoring this device.
[ 27.169] (II) This device may have been added with another device file.
[ 27.169] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 27.169] (II) No input driver specified, ignoring this device.
[ 27.169] (II) This device may have been added with another device file.
[ 27.169] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 27.169] (II) No input driver specified, ignoring this device.
[ 27.169] (II) This device may have been added with another device file.
[ 27.169] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 27.169] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.169] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.169] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.169] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 27.169] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 27.169] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 27.169] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.169] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 27.169] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 27.169] (**) Option "xkb_rules" "evdev"
[ 27.169] (**) Option "xkb_model" "pc105"
[ 27.169] (**) Option "xkb_layout" "us"
[ 27.170] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 27.170] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 27.170] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 27.170] (II) LoadModule: "synaptics"
[ 27.170] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.171] (II) Module synaptics: vendor="X.Org Foundation"
[ 27.171] compiled for 1.11.3, module version = 1.6.2
[ 27.171] Module class: X.Org XInput Driver
[ 27.171] ABI class: X.Org XInput driver, version 16.0
[ 27.171] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 27.171] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.171] (**) Option "Device" "/dev/input/event7"
[ 27.187] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.188] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input7/event7"
[ 27.188] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 27.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 27.188] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 27.188] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 27.188] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 27.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 27.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 27.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 27.188] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27.188] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 27.188] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 27.190] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[ 27.190] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 27.190] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 27.190] (**) Acer WMI hotkeys: always reports core events
[ 27.190] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event5"
[ 27.190] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 27.190] (--) evdev: Acer WMI hotkeys: Found keys
[ 27.190] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 27.190] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 27.190] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 27.190] (**) Option "xkb_rules" "evdev"
[ 27.190] (**) Option "xkb_model" "pc105"
[ 27.190] (**) Option "xkb_layout" "us"
[ 31.561] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 31.561] (II) intel(0): Printing DDC gathered Modelines:
[ 31.561] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)
[ 38.171] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 38.171] (II) intel(0): Printing DDC gathered Modelines:
[ 38.171] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)
[ 50.773] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 50.773] (II) intel(0): Printing DDC gathered Modelines:
[ 50.773] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)
[ 51.223] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 51.223] (II) intel(0): Printing DDC gathered Modelines:
[ 51.223] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)
[ 52.388] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
[ 75.384] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 75.384] (II) intel(0): Printing DDC gathered Modelines:
[ 75.384] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)

Can you help with this problem?

Provide an answer of your own, or ask Dragan Raicici for more information if necessary.

To post a message you must log in.