Ubuntu
xserver-xorg-driver-sis package

blank screen on boot up after 9.10 update

Asked by Granton Smith on 2010-01-07

Hi all, appologies if the answer to this question is lurking somewhere in another post... but I'm a complete Ubuntu (and Linux) noob, and I can't seem to figure this out.

I downloaded recently the ubuntu 9.10 distribution and installed it on my Acer aspire 3000 notebook. The installation went fine... it was easy even. Impressed! The update manager came up and downloaded about 100mb of goodies. Everything was working well, using default drivers across the board.

Anyway, after a few days playing around the system update manager popped up and asked if I wanted to download more updates (this was on 5/1/10). After installing this update I found that the GUI ("X"?) wouldn't boot up anymore. I get a circle logo for a short time after GRUB loads and then......blank.

After much fiddling around (and a bit of learning) and LOTS of reading over the last couple of days (including one complete re-install from the CD) I found that if I hit ctrl-alt-F7 once the system boots to the blank screen, it brings me to the X desktop.

So I can work around the problem by hitting ctrl-alt-F7 whenever I start the computer... but it was nicer before... Ideas? Pls bear in mind that I know absolutely zero about linux...

Thanks guys.

Question information

Language:: English Edit question

Status:: Solved

For:: Ubuntu xserver-xorg-driver-sis Edit question

Assignee:: No assignee Edit question

Solved by:: applecache(Nolan King)

Solved:: 2010-01-10

Last query:: 2010-01-10

Last reply:: 2010-01-08

Link existing bug

Revision history for this message

applecache(Nolan King) (nolanking) said on 2010-01-07:

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version of xorg-server. This will tell us if the update was succesful.

Bring up a terminal and type gedit /var/log/Xorg.0.log

Then tell us the output of that file:

Revision history for this message

Granton Smith (emerger04) said on 2010-01-07:

Oxorg.0.log attached:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux ubuntu-laptop 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=af8c0350-5847-47ce-8c2a-555c944b588a ro quiet splash
Build Date: 26 October 2009 05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 8 09:19:39 2010
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1039:6330:1025:0083 Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x0000a000/128
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
  Identifier "Builtin Default sis Device 0"
  Driver "sis"
EndSection
Section "Screen"
  Identifier "Builtin Default sis Screen 0"
  Device "Builtin Default sis Device 0"
EndSection
Section "Device"
  Identifier "Builtin Default vesa Device 0"
  Driver "vesa"
EndSection
Section "Screen"
  Identifier "Builtin Default vesa Screen 0"
  Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
  Identifier "Builtin Default fbdev Device 0"
  Driver "fbdev"
EndSection
Section "Screen"
  Identifier "Builtin Default fbdev Screen 0"
  Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
  Identifier "Builtin Default Layout"
  Screen "Builtin Default sis Screen 0"
  Screen "Builtin Default vesa Screen 0"
  Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default sis Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default sis Device 0"
(==) No monitor specified for screen "Builtin Default sis Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.10.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.4.0
ABI class: X.Org Video Driver, version 5.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis
(--) Assigning device section with no busID to primary device
(--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.6.0.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <email address hidden> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xA000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SIS(0): Creating default Display subsection in Screen section
"Builtin Default sis Screen 0" for depth/fbbpp 24/32
(==) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(WW) SIS(0): Could not find/read video BIOS
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0): whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
  http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): 32768K shared video RAM (UMA)
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 198.861 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xE8000000
(--) SIS(0): MMIO registers at 0xE2100000 (size 64K)
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 32192K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(II) SIS(0):
Dear SiS76x user, your machine is using a shared memory framebuffer.
Due to hardware limitations of the SiS chip in combination with the
AMD CPU, video overlay support is very limited on this machine. If you
experience flashing lines in the video and/or the graphics display
during video playback, reduce the color depth and/or the resolution
and/or the refresh rate. Alternatively, use the video blitter.
(--) SIS(0): Detected SiS302LV video bridge (Charter/UMC-1, ID 1; Rev 0xe1)
(--) SIS(0): BIOS uses LCDA for low resolution and text modes
(--) SIS(0): No CRT1/VGA detected
(--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [6cc106])
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): CRT1 gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
(II) SIS(0): CRT2 gamma correction is enabled
(--) SIS(0): Memory bandwidth at 32 bpp is 397.722 MHz
(--) SIS(0): Detected LCD PanelDelayCompensation 0x01 (for LCD=CRT2)
(--) SIS(0): Detected LCD PanelDelayCompensation1 0x04 (for LCD=CRT1)
(--) SIS(0): 302LV/302ELV: Using EMI 0x600d703f (LCD)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT2 DDC probing failed
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 290 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Correcting missing CRT2 monitor HSync range
(II) SIS(0): Correcting missing CRT2 monitor VRefresh range
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): <default monitor>: Using hsync range of 30.00-80.00 kHz
(II) SIS(0): <default monitor>: Using vrefresh range of 59.00-61.00 Hz
(II) SIS(0): <default monitor>: Using vrefresh value of 71.00 Hz
(WW) SIS(0): Unable to estimate virtual size
(II) SIS(0): Clock range: 10.00 to 290.64 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (unknown reason)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1360x768" (unknown reason)
(II) SIS(0): Not using default mode "1280x800" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1680x1050" (unknown reason)
(II) SIS(0): Not using default mode "1920x1080" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(--) SIS(0): Virtual size is 1280x800 (pitch 1280)
(**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x768" (1280x768) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x720" (1280x720) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "1024x576" (1024x576) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "960x600" (960x600) (For CRT device: 41.5 MHz, 37.1 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "960x540" (960x540) (For CRT device: 37.3 MHz, 33.8 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
(**) SIS(0): *Default mode "768x576" (768x576) (For CRT device: 35.0 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "720x576" (720x576) (For CRT device: 32.7 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "856x480" (856x480) (For CRT device: 33.9 MHz, 31.7 kHz, 59.8 Hz)
(**) SIS(0): *Default mode "848x480" (848x480) (For CRT device: 33.7 MHz, 31.0 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x480" (800x480) (For CRT device: 39.8 MHz, 37.7 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "720x480" (720x480) (For CRT device: 28.3 MHz, 31.6 kHz, 61.0 Hz)
(**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
(**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
(**) SIS(0): *Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D))
(**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
(**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
(**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
(==) SIS(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): 2D acceleration enabled
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 2.27.g7
(II) SIS(0): Setting standard mode 0x16
(II) SIS(0): SiS76x/UMA: two video overlay(s) available in current mode
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (1279,6436)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
  32 128x128 slots
  32 256x256 slots
  16 512x512 slots
  32 8x8 color pattern slots
(--) SIS(0): CPU frequency 1600.00Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): Checked libc memcpy()... 404.9 MiB/s
(--) SIS(0): Checked built-in-1 memcpy()... 395.4 MiB/s
(--) SIS(0): Checked built-in-2 memcpy()... 76.6 MiB/s
(--) SIS(0): Checked MMX memcpy()... 400.3 MiB/s
(--) SIS(0): Checked 3DNow! memcpy()... 403.2 MiB/s
(--) SIS(0): Checked MMX2 memcpy()... 442.5 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Power Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event6"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) SIS(0): Restoring by setting old mode 0x03
(II) Open ACPI successful (/var/run/acpid.socket)
(II) SIS(0): Setting standard mode 0x16
(II) SIS(0): SiS76x/UMA: two video overlay(s) available in current mode
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.

Oxorg.0.log attached:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux ubuntu-laptop 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=af8c0350-5847-47ce-8c2a-555c944b588a ro quiet splash
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  8 09:19:39 2010
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1039:6330:1025:0083 Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x0000a000/128
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default sis Device 0"
		Driver	"sis"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default sis Screen 0"
		Device	"Builtin Default sis Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default sis Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default sis Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default sis Device 0"
(==) No monitor specified for screen "Builtin Default sis Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[26] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[27] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[28] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[29] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.10.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
	SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
	Volari V3XT/V5/V8/Duo (XG40)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis
(--) Assigning device section with no busID to primary device
(--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[26] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[27] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[28] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[29] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 0.0.2
	ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[21] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[22] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[24] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[25] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[26] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[29] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[30] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[31] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[32] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[33] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[34] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.6.0.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xA000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SIS(0): Creating default Display subsection in Screen section
	"Builtin Default sis Screen 0" for depth/fbbpp 24/32
(==) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(WW) SIS(0): Could not find/read video BIOS
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0):          whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
		http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): 32768K shared video RAM (UMA)
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 198.861 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xE8000000
(--) SIS(0): MMIO registers at 0xE2100000 (size 64K)
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 32192K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(II) SIS(0): 
	Dear SiS76x user, your machine is using a shared memory framebuffer.
	Due to hardware limitations of the SiS chip in combination with the
	AMD CPU, video overlay support is very limited on this machine. If you
	experience flashing lines in the video and/or the graphics display
	during video playback, reduce the color depth and/or the resolution
	and/or the refresh rate. Alternatively, use the video blitter.
(--) SIS(0): Detected SiS302LV video bridge (Charter/UMC-1, ID 1; Rev 0xe1)
(--) SIS(0): BIOS uses LCDA for low resolution and text modes
(--) SIS(0): No CRT1/VGA detected
(--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [6cc106])
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): CRT1 gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
(II) SIS(0): CRT2 gamma correction is enabled
(--) SIS(0): Memory bandwidth at 32 bpp is 397.722 MHz
(--) SIS(0): Detected LCD PanelDelayCompensation 0x01 (for LCD=CRT2)
(--) SIS(0): Detected LCD PanelDelayCompensation1 0x04 (for LCD=CRT1)
(--) SIS(0): 302LV/302ELV: Using EMI 0x600d703f (LCD)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT2 DDC probing failed
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 290 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Correcting missing CRT2 monitor HSync range
(II) SIS(0): Correcting missing CRT2 monitor VRefresh range
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): <default monitor>: Using hsync range of 30.00-80.00 kHz
(II) SIS(0): <default monitor>: Using vrefresh range of 59.00-61.00 Hz
(II) SIS(0): <default monitor>: Using vrefresh value of 71.00 Hz
(WW) SIS(0): Unable to estimate virtual size
(II) SIS(0): Clock range:  10.00 to 290.64 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (unknown reason)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1360x768" (unknown reason)
(II) SIS(0): Not using default mode "1280x800" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1680x1050" (unknown reason)
(II) SIS(0): Not using default mode "1920x1080" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(--) SIS(0): Virtual size is 1280x800 (pitch 1280)
(**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x768" (1280x768) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x720" (1280x720) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "1024x576" (1024x576) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "960x600" (960x600) (For CRT device: 41.5 MHz, 37.1 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "960x540" (960x540) (For CRT device: 37.3 MHz, 33.8 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
(**) SIS(0): *Default mode "768x576" (768x576) (For CRT device: 35.0 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "720x576" (720x576) (For CRT device: 32.7 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "856x480" (856x480) (For CRT device: 33.9 MHz, 31.7 kHz, 59.8 Hz)
(**) SIS(0): *Default mode "848x480" (848x480) (For CRT device: 33.7 MHz, 31.0 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x480" (800x480) (For CRT device: 39.8 MHz, 37.7 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "720x480" (720x480) (For CRT device: 28.3 MHz, 31.6 kHz, 61.0 Hz)
(**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
(**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
(**) SIS(0): *Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D))
(**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
(**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
(**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
(==) SIS(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): 2D acceleration enabled
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[13] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[14] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[15] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[16] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[17] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[18] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[19] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[20] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[21] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[22] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[24] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[25] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[26] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[29] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[30] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[31] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[32] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[33] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[34] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 2.27.g7
(II) SIS(0): Setting standard mode 0x16
(II) SIS(0): SiS76x/UMA: two video overlay(s) available in current mode
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (1279,6436)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	8x8 color pattern filled rectangles
	Solid Lines
	Dashed Lines
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
		32 8x8 color pattern slots
(--) SIS(0): CPU frequency 1600.00Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): 	Checked libc memcpy()... 	404.9 MiB/s
(--) SIS(0): 	Checked built-in-1 memcpy()... 	395.4 MiB/s
(--) SIS(0): 	Checked built-in-2 memcpy()... 	76.6 MiB/s
(--) SIS(0): 	Checked MMX memcpy()... 	400.3 MiB/s
(--) SIS(0): 	Checked 3DNow! memcpy()... 	403.2 MiB/s
(--) SIS(0): 	Checked MMX2 memcpy()... 	442.5 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Power Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event6"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) SIS(0): Restoring by setting old mode 0x03
(II) Open ACPI successful (/var/run/acpid.socket)
(II) SIS(0): Setting standard mode 0x16
(II) SIS(0): SiS76x/UMA: two video overlay(s) available in current mode
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.

Revision history for this message

applecache(Nolan King) (nolanking) said on 2010-01-08:

This is an email of a guy who also has an acer aspire 3000 notebook. You might want to contact him to find out if he has upgraded to ubuntu 9.10 and what problems he has encountered and fixed. Also below is the website where i found it. Notice it is old and still on gutsy.

pblevins (at) gmail (dot) com

http://www.linux-on-laptops.com/hosted/acer-aspire-3000-ubuntu-gutsy.html

When looking at your output file i came across this. I take it that this laptop has integrated graphics and not dedicated. Try resolving the problem by getting into gui display (ctrl-alt-F7) and reducing refresh rate or colour depth.

Dear SiS76x user, your machine is using a shared memory framebuffer.
Due to hardware limitations of the SiS chip in combination with the
AMD CPU, video overlay support is very limited on this machine. If you
experience flashing lines in the video and/or the graphics display
during video playback, reduce the color depth and/or the resolution
and/or the refresh rate. Alternatively, use the video blitter.

All the best :)

Revision history for this message

Granton Smith (emerger04) said on 2010-01-10:

Thanks applecache, that solved my question.

Revision history for this message

Granton Smith (emerger04) said on 2010-01-10:

...acutally It kinda solved it...

I have incresed the video buffer in the BIOS and now don't get the flickering screen "artifacts" that I was getting before... they were really a side issue though.

I followed the instructions I found here:
https://launchpad.net/~xorg-edgers/+archive/drivers-only
to install the PPA with a new SIS driver...

lo-and behold... BING! X-ubuntu loads straight away at boot up... no more black screen of nothingness, and no more need to hit ctrl-alt-F7 to get into the x gui...

I'm learning slowly!!

To post a message you must log in.

Ask a question

Edit question

Ubuntuxserver-xorg-driver-sis package

blank screen on boot up after 9.10 update

Question information

Related bugs

Related FAQ:

Subscribers

Ubuntu
xserver-xorg-driver-sis package