Ubuntu
xserver-xorg-driver-s3 package

Video card installation

Asked by Tom NZ

Greetings,
I have recently installed Ubuntu on my desktop with MS-6183 motherboard. It works reasonably well but the graphics have a protracted flickering session during bootup.
To side step that problem I am trying to install a S3 TRIO64v+ card and am faced with:
"Failed to start the x server...........it is likely that it is not configured correctly...."
I viewed the X server output:
"X server output
X Window System Version 7.1.1
Markers etc etc etc ...
(==) Log File: "/var/log/xorg.0.log"
(==) Using config file: "/etc/x11/xorg.conf"

I have disabled the onboard video chip.
I guess that I need to use the S3 driver, but can't figure how to do that when I can't start Ubuntu.
Thanks
Tom

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu xserver-xorg-driver-s3 Edit question
Assignee:
No assignee Edit question
Solved by:
Ralph Janke
Solved:
Last query:
Last reply:
Revision history for this message
Tom NZ (tom-southgate) said : 		#1

Sorry I sent this twice!!

Revision history for this message
GabrielGrant (gabrielgrant) said : 		#2

Hi,

no worries about the double post.

Could you please attach a copy of /etc/X11/xorg.conf and /etc/X11/xorg.0.log as well as the output for the command "lspci -vv", and we'll see where we can go from there.

Thanks,
-Gabriel

Revision history for this message
Tom NZ (tom-southgate) said : 		#3

Hi Gabriel, Here's the lspci result -
tom@tom-desktop:~$ lspci -vv
00:00.0 Host bridge: Intel Corporation 82810 DC-100 GMCH [Graphics Memory Controller Hub] (rev 03)
        Subsystem: Intel Corporation 82810 DC-100 GMCH [Graphics Memory Controller Hub]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0

00:01.0 VGA compatible controller: Intel Corporation 82810 DC-100 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 6838
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
        Region 1: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: efd00000-efdfffff
        Prefetchable memory behind bridge: e7b00000-e7bfffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if 80 [Master])
        Subsystem: Intel Corporation 82801AA IDE
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Region 4: I/O ports at ffa0 [size=16]

00:1f.2 USB Controller: Intel Corporation 82801AA USB (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation 82801AA USB
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 10
        Region 4: I/O ports at d400 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio (rev 02)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 6831
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: I/O ports at dc00 [size=256]
        Region 1: I/O ports at d800 [size=64]

01:01.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 2000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at bc00 [size=64]
        Expansion ROM at e7b00000 [disabled] [size=64K]

tom@tom-desktop:~$

I'm having some trouble with the other 2 requests - when I put in sudo /etc/X11/xorg.config I get the password prompt but I can't key it in!
Sorry to be so dense.
Tom

Revision history for this message
Best Ralph Janke (txwikinger) said : 		#4

sudo requires you to put in the account password you are currently logged in, not a root password.

Your account must be configured in the sudoer list. The account you create doing the installation of ubuntu is automatically entered into this list.

I hope this helps.

Revision history for this message
Tom NZ (tom-southgate) said : 		#5

Sorry to be so useless, Folks,
When i enter 'sudo passwd root' on my terminal, I get the password prompt, but then my keyboard will not key anything!
The only key that will work at that stage is the 'enter' key.
Obviously this is a basic hurdle which I need to overcome.
Thanks in anticipation
Tom

Revision history for this message
Tom NZ (tom-southgate) said : 		#6

I've found the xorg.0.log file by using the search tool:

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux tom-desktop 2.6.17-11-generic #2 SMP Thu Feb 1 19:52:28 UTC 2007 i686
Build Date: 07 July 2006
 Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 2 06:07:32 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "PHILIPS 107S"
(**) | |-->Device "Intel Corporation 82810 DC-100 CGC [Chipset Graphics Controller]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
 Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
 Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
 Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
 Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
 Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
 Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
 Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
 Entry deleted from font path.
 (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(**) FontPath set to:
 /usr/share/fonts/X11/misc,
 /usr/share/fonts/X11/misc/,
 /usr/share/fonts/X11/TTF/,
 /usr/share/fonts/X11/OTF,
 /usr/share/fonts/X11/Type1/,
 /usr/share/fonts/X11/CID/,
 /usr/share/fonts/X11/100dpi/,
 /usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
 X.Org ANSI C Emulation: 0.3
 X.Org Video Driver: 1.0
 X.Org XInput driver : 0.6
 X.Org Server Extension : 0.3
 X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 Module class: X.Org Font Renderer
 ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7122 card 8086,7122 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7123 card 1462,6838 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 1462,6831 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:01:0: chip 10b7,9050 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
 [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
 [0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
 [0] -1 0 0xefd00000 - 0xefdfffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
 [0] -1 0 0xe7b00000 - 0xe7bfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corporation 82810 DC-100 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xe8000000/26, 0xeff80000/19
(II) Addressable bus resource ranges are
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
 [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
 [0] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
 [1] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
 [2] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B]
 [3] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
 [4] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
 [5] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [6] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
 [0] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
 [1] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
 [2] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B]
 [3] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
 [4] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
 [5] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [6] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
 [5] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
 [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [8] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B]
 [9] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
 [10] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
 [11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [12] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.2.0
 ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 Module class: X.Org Server Extension
 ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
 compiled for 7.1.1, module version = 2.1.0
 Module class: X.Org Font Renderer
 ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.2
 Module class: X.Org Font Renderer
 ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.1.0
 ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers/i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.6.5
 Module class: X.Org Video Driver
 ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.1.0
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.1.1
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
 compiled for 4.3.99.902, module version = 1.0.0
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
 i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ
(II) Primary Device is: PCI 00:01:0
(--) Chipset i810-dc100 found
(II) resource ranges after xf86ClaimFixedResources() call:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
 [5] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
 [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [8] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B]
 [9] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
 [10] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
 [11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [12] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
 [5] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
 [6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
 [7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
 [8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
 [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [11] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B]
 [12] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
 [13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
 [14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
 [16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
 [17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 0.1.0
 ABI class: X.Org Video Driver, version 1.0
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.2.0
 ABI class: X.Org Video Driver, version 1.0
(**) I810(0): DRI is disabled because it runs only at 16-bit depth.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 2.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 0.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: i810 Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: PHL Model: e005 Serial#: 758877
(II) I810(0): Year: 2001 Week: 7
(II) I810(0): EDID Version: 1.1
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) I810(0): Sync: Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23
(II) I810(0): Gamma: 2.87
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.620 redY: 0.345 greenX: 0.290 greenY: 0.610
(II) I810(0): blueX: 0.155 blueY: 0.061 whiteX: 0.283 whiteY: 0.297
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) I810(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): #4: hsize: 640 vsize 480 refresh: 100 vid: 26673
(II) I810(0): #5: hsize: 800 vsize 600 refresh: 99 vid: 26437
(II) I810(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) I810(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 25.2 MHz Image Size: 306 x 230 mm
(II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) I810(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) I810(0): Serial No: CX 758877
(II) I810(0): Monitor name: PHILIPS 107S
(II) I810(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71 kHz, PixClock max 110 MHz
(--) I810(0): Chipset: "i810-dc100"
(--) I810(0): Linear framebuffer at 0xE8000000
(--) I810(0): IO registers at addr 0xEFF80000
(II) I810(0): Kernel reported 81920 total, 1 used
(II) I810(0): I810CheckAvailableMemory: 327676k available
(==) I810(0): Will alloc AGP framebuffer: 8192 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): PHILIPS 107S: Using default hsync range of 30.00-71.00 kHz
(II) I810(0): PHILIPS 107S: Using default vrefresh range of 50.00-160.00 Hz
(II) I810(0): Clock range: 9.50 to 136.00 MHz
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,PHILIPS 107S) mode clock 135MHz exceeds DDC maximum 110MHz
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(WW) (1152x864,PHILIPS 107S) mode clock 121.5MHz exceeds DDC maximum 110MHz
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,PHILIPS 107S) mode clock 122MHz exceeds DDC maximum 110MHz
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) I810(0): Not using default mode "1440x900" (width too large for virtual size)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) I810(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) I810(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) I810(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) I810(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) I810(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) I810(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) I810(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) I810(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) I810(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) I810(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) I810(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) I810(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
(**) I810(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
(**) I810(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) I810(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) I810(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) I810(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) I810(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) I810(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) I810(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(--) I810(0): Display dimensions: (310, 230) mm
(--) I810(0): DPI set to (104, 113)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 0.1.0
 ABI class: X.Org Video Driver, version 1.0
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
 [0] 0 0 0xeff80000 - 0xefffffff (0x80000) MS[B]
 [1] 0 0 0xe8000000 - 0xebffffff (0x4000000) MS[B]
 [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [6] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
 [7] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
 [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
 [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
 [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
 [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [13] -1 0 0x0000bc00 - 0x0000bc3f (0x40) IX[B]
 [14] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
 [15] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
 [16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
 [17] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
 [18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
 [19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) I810(0): Write-combining range (0xe8000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) I810(0): chose watermark 0x22418000: (tab.freq 108.0)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x00c00000 (pgoffset 3072)
(II) I810(0): Allocated of 4096 bytes for HW cursor
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x00c01000 (pgoffset 3073)
(II) I810(0): Allocated of 16384 bytes for ARGB HW cursor
(II) I810(0): Adding 256 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
 Screen to screen bit blits
 Solid filled rectangles
 8x8 mono pattern filled rectangles
 Indirect CPU to Screen color expansion
 Solid Horizontal and Vertical Lines
 Offscreen Pixmaps
 Setting up tile and stipple cache:
  32 128x128 slots
  12 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) Option "dpms"
(**) I810(0): DPMS enabled
(WW) I810(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
 compiled for 7.1.1, module version = 1.0.0
 ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
    xkb_keycodes { include "xfree86+aliases(qwerty)" };
    xkb_types { include "complete" };
    xkb_compatibility { include "complete" };
    xkb_symbols { include "pc(pc105)+us+level3(ralt_switch)" };
    xkb_geometry { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
 No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
 No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
 No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
 No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
 No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
 No such file or directory.
Error opening /dev/wacom : Success
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
(II) I810(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) I810(0): chose watermark 0x22418000: (tab.freq 108.0)
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetGrabKeysState - disabled
SetGrabKeysState - enabled

Revision history for this message
Tom NZ (tom-southgate) said : 		#7

And here is the X11/xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
 FontPath "/usr/share/X11/fonts/misc"
 FontPath "/usr/share/X11/fonts/cyrillic"
 FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/share/X11/fonts/Type1"
 FontPath "/usr/share/X11/fonts/100dpi"
 FontPath "/usr/share/X11/fonts/75dpi"
 FontPath "/usr/share/fonts/X11/misc"
 # path to defoma fonts
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
 Load "i2c"
 Load "bitmap"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "type1"
 Load "vbe"
EndSection

Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver "kbd"
 Option "CoreKeyboard"
 Option "XkbRules" "xorg"
 Option "XkbModel" "pc105"
 Option "XkbLayout" "us"
 Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
 Identifier "Configured Mouse"
 Driver "mouse"
 Option "CorePointer"
 Option "Device" "/dev/input/mice"
 Option "Protocol" "ExplorerPS/2"
 Option "ZAxisMapping" "4 5"
 Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  Option "Device" "/dev/wacom" # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option "Type" "stylus"
  Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  Option "Device" "/dev/wacom" # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option "Type" "eraser"
  Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  Option "Device" "/dev/wacom" # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option "Type" "cursor"
  Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
 Identifier "Intel Corporation 82810 DC-100 CGC [Chipset Graphics Controller]"
 Driver "i810"
 BusID "PCI:0:1:0"
EndSection

Section "Monitor"
 Identifier "PHILIPS 107S"
 Option "DPMS"
EndSection

Section "Screen"
 Identifier "Default Screen"
 Device "Intel Corporation 82810 DC-100 CGC [Chipset Graphics Controller]"
 Monitor "PHILIPS 107S"
 DefaultDepth 24
 SubSection "Display"
  Depth 1
  Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
 EndSubSection
 SubSection "Display"
  Depth 4
  Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
 EndSubSection
 SubSection "Display"
  Depth 8
  Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
 EndSubSection
 SubSection "Display"
  Depth 15
  Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
 EndSubSection
 SubSection "Display"
  Depth 16
  Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
 EndSubSection
 SubSection "Display"
  Depth 24
  Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x350"
 EndSubSection
EndSection

Section "ServerLayout"
 Identifier "Default Layout"
 Screen "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
 InputDevice "stylus" "SendCoreEvents"
 InputDevice "cursor" "SendCoreEvents"
 InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
 Mode 0666
EndSection

Revision history for this message
Mike Dahlgren (dahlgren) said : 		#8

Tom,

   As you know that when you type "sudo root passwd" you are trying to change the root password. However before it will let you do this it is prompting you for the user name password that you are currently logged in as (e.g. tom). After that it will ask you for the new "root" password. The reason why it doesn't show what you're typing is so someone looking over your shoulder couldn't figure out how many characters your password is. Hope that helps

Revision history for this message
Tom NZ (tom-southgate) said : 		#9

Thanks Mike!
I must apologise for bumbling around with my terminal in such a heavy handed manner - I have still some to learn about that issue!

Sorry too for putting those log files on in full, when I could have put them as attachments.

After viewing those files I can see where some of my graphics problems may lay, but I'm not really up to modifying those X11/config files without some guidance!
Cheers

Revision history for this message
Tom NZ (tom-southgate) said : 		#10

Thanks for that info - as you can see my experience with sudo (and with Ubuntu) is not very great - but I'm learning.
I managed to get those log files that GabrielGrant asked for, but not via sudo. I still need some coaching on that.
I really appreciate your help.
Tom