unable to change screen res in xubuntu
Hello
I have just installed xubuntu 10.10 on a toshiba satellite Pro 4600 - I wish to change the screen res from 800 x 600 to 1024x768
I have used
sudo dpkg-reconfigure xserver-xorg
but I get the following message
debconf: Unable to initialise frontend: Dialog
debconf: (dialogue frontend will not work on a dumb terminal, an Emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
any ideas what I am doing wrong?
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- marcobra (Marco Braida)
- Solved:
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Please open a terminale and type:
lspci | grep -i vga
copy and paste result here....
Revision history for this message
|
#2 |
On 7 December 2010 17:59, marcobra (Marco Braida) <
<email address hidden>> wrote:
> Your question #136698 on xorg in ubuntu changed:
> https:/
>
> Status: Open => Needs information
>
> marcobra (Marco Braida) requested for more information:
> Please open a terminale and type:
>
> lspci | grep -i vga
>
> copy and paste result here....
> lspci [<switches>]
>
> Basic display modes:
> -mm Produce machine-readable output (single -m for an obsolete
> format)
> -t Show bus tree
>
> Display options:
> -v Be verbose (-vv for very verbose)
> -k Show kernel drivers handling each device
> -x Show hex-dump of the standard part of the config space
> -xxx Show hex-dump of the whole config space (dangerous; root only)
> -xxxx Show hex-dump of the 4096-byte extended config space (root
> only)
> -b Bus-centric view (addresses and IRQ's as seen by the bus)
> -D Always show domain numbers
>
> Resolving of device ID's to names:
> -n Show numeric ID's
> -nn Show both textual and numeric ID's (names & numbers)
> -q Query the PCI ID database for unknown ID's via DNS
> -qq As above, but re-query locally cached entries
> -Q Query the PCI ID database for all ID's via DNS
>
> Selection of devices:
> -s [[[[<domain>
> selected slots
> -d [<vendor>
>
> Other options:
> -i <file> Use specified ID database instead of vga
> -p <file> Look up kernel modules in a given file instead of default
> modules.pcimap
> -M Enable `bus mapping' mode (dangerous; root only)
>
> PCI access options:
> -A <method> Use the specified PCI access method (see `-A help' for a
> list)
> -O <par>=<val> Set PCI access parameter (see `-O help' for a list)
> -G Enable PCI access debugging
> -H <mode> Use direct hardware access (<mode> = 1 or 2)
> -F <file> Read PCI configuration dump from a given file
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https:/
>
> You received this question notification because you are a direct
> subscriber of the question.
>
Revision history for this message
|
#3 |
please manage your question using a browser please don't answer using mail visit your question link
https:/
with a browser
Please open a terminal from applications→
lspci | grep -i vga
copy and paste result here....
Revision history for this message
|
#4 |
lspci grep -i vga
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>
-d [<vendor>
Other options:
-i <file> Use specified ID database instead of vga
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
Revision history for this message
|
#5 |
Hello anybody
Can someone help?
Marcobra was this the info you asked for?
Revision history for this message
|
#6 |
Still no useful info from you please retry:
Please open a terminal and type please don't forget the--> | <-- pipe command :
lspci | grep -i vga
copy and paste result here....
Revision history for this message
|
#7 |
ok sorry I misunderstood - I'll try again
Revision history for this message
|
#8 |
> lspci | grep -i vga
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[<domain>
-d [<vendor>
Other options:
-i <file> Use specified ID database instead of /usr/share/
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/XP (rev 63)
Revision history for this message
|
#9 |
Any news? was this the info requested?
help please!
Revision history for this message
|
#10 |
no here an example of the row returned from the
lspci | grep -i vga
command
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 0e)
Revision history for this message
|
#11 |
at the bottom of the text generated it says: (as pasted above)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/XP (rev 63)
Revision history for this message
|
#12 |
Sorry If I seem stupid but this really is new to me! was the info above correct? using the pipe command as you said did give me a different result but only on the bottom row of text which is what I have entered above
Revision history for this message
|
#13 |
Ok is correct you have the
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/XP (rev 63)
video card now we (and you) have some info to search on the net some solution...
Revision history for this message
|
#14 |
First, please read the already answered question https:/
Revision history for this message
|
#15 |
Please try this solution: https:/
Revision history for this message
|
#16 |
ok thanks
I tried to follow the instructions in the link as left by action parsnip
however when I enter the following in the terminal
gksudo gedit /etc/X11/xorg.conf
it takes me to a password box whereupon I enter the correct password then it
returns me to the terminal screen. I then try to copy and paste the text as
shown but I am unable to paste all the text in one go it then proceeds to
run through each line of the text as seperate commands ?
On 14 December 2010 20:55, marcobra (Marco Braida) <
<email address hidden>> wrote:
> Your question #136698 on xserver-
>
> https:/
>
> Project: xorg in ubuntu => xserver-
>
> --
> You received this question notification because you are a direct
> subscriber of the question.
>
Revision history for this message
|
#17 |
this is how it appears in the terminal
michael@
michael@
Section: command not found
michael@
Identifier: command not found
michael@
Driver: command not found
michael@
EndSection: command not found
michael@
michael@
Section: command not found
michael@
Identifier: command not found
michael@
Option: command not found
michael@
HorizSync: command not found
michael@
VertRefresh: command not found
michael@
EndSection: command not found
michael@
michael@
Section: command not found
michael@
Identifier: command not found
michael@
No command 'Monitor' found, did you mean:
Command 'monitor' from package 'dmucs' (universe)
Monitor: command not found
michael@
Device: command not found
michael@
DefaultDepth: command not found
michael@
SubSection: command not found
michael@
Depth: command not found
michael@
Modes: command not found
michael@
EndSubSection: command not found
michael@
EndSection: command not found
michael@
michael@
Section: command not found
michael@
Identifier: command not found
michael@
No command 'Screen' found, did you mean:
Command 'screen' from package 'screen' (main)
Screen: command not found
michael@
Revision history for this message
|
#18 |
On xUbuntu you have a different editor not gedit so you must replace the gedit with xUbuntu another editor ( i don't use xubuntu )
so please try nano
instead of type "gksudo gedit /etc/X11/xorg.conf" type:
sudo nano /etc/X11/xorg.conf
then copy and paste the text inside it then save with ctrl+x confirm save and exit then reboot yuor pc.
Revision history for this message
|
#19 |
Marco you are a star thanks very much it all works fine now, :)
thank you for your patience
Revision history for this message
|
#20 |
As final suggestion guessing you are new to Ubuntu to be able to play mp3 and other restricted formats please open a terminal and type:
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install xubuntu-
the system will ask you a password: give your user password, you will not see nothing when you type it, then press enter