usb dvdrw disappears after installation of Ubuntu 10.04

I downloaded the image file for the intallation cd for Ubuntu 10.04. I used it to make the cd and installed Ubuntu 10.04 perfectly. I had no idea that the dvdrw that I used to install Ubuntu had not been detected after the installation was complete until I tried to use it for the OS installation part of VirtualBox. The usb driver seems to be there because it shows up in "dmesg" but it does not show up in fstab and something about the usb ports is in "lshw" but I don't know what it means because I am too new to Ubuntu.

Here is the output for "lshw" and "dmesg". I think the error concerning SCSI5 at the end might have something to do with it.

john-desktop
    description: Computer
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-memory:0
          description: System memory
          physical id: 3
          size: 1949MiB
     *-cpu
          product: AMD Athlon(tm) 64 Processor 3200+
          vendor: Advanced Micro Devices [AMD]
          physical id: 7
          bus info: cpu@0
          version: 15.15.2
          size: 2GHz
          capacity: 2GHz
          width: 64 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow up extd_apicid pni cx16 lahf_lm svm extapic cr8_legacy cpufreq
        *-cache:0
             description: L1 cache
             physical id: 0
             size: 128KiB
        *-cache:1
             description: L2 cache
             physical id: 1
             size: 512KiB
     *-memory:1 UNCLAIMED
          description: RAM memory
          product: MCP61 Memory Controller
          vendor: nVidia Corporation
          physical id: 0
          bus info: pci@0000:00:00.0
          version: a1
          width: 32 bits
          clock: 66MHz (15.2ns)
          capabilities: bus_master cap_list
          configuration: latency=0
     *-isa
          description: ISA bridge
          product: MCP61 LPC Bridge
          vendor: nVidia Corporation
          physical id: 1
          bus info: pci@0000:00:01.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: isa bus_master
          configuration: latency=0
     *-serial
          description: SMBus
          product: MCP61 SMBus
          vendor: nVidia Corporation
          physical id: 1.1
          bus info: pci@0000:00:01.1
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: cap_list
          configuration: driver=nForce2_smbus latency=0
          resources: irq:10 ioport:fc00(size=64) ioport:1c00(size=64) ioport:f400(size=64)
     *-memory:2 UNCLAIMED
          description: RAM memory
          product: MCP61 Memory Controller
          vendor: nVidia Corporation
          physical id: 1.2
          bus info: pci@0000:00:01.2
          version: a2
          width: 32 bits
          clock: 66MHz (15.2ns)
          configuration: latency=0
     *-usb:0
          description: USB Controller
          product: MCP61 USB Controller
          vendor: nVidia Corporation
          physical id: 2
          bus info: pci@0000:00:02.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: bus_master cap_list
          configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
          resources: irq:21 memory:fe02f000-fe02ffff
     *-usb:1
          description: USB Controller
          product: MCP61 USB Controller
          vendor: nVidia Corporation
          physical id: 2.1
          bus info: pci@0000:00:02.1
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: bus_master cap_list
          configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
          resources: irq:22 memory:fe02e000-fe02e0ff
     *-pci:0
          description: PCI bridge
          product: MCP61 PCI bridge
          vendor: nVidia Corporation
          physical id: 4
          bus info: pci@0000:00:04.0
          version: a1
          width: 32 bits
          clock: 66MHz
          capabilities: pci bus_master cap_list
          resources: ioport:c000(size=4096) memory:fd800000-fd8fffff memory:fdf00000-fdffffff(prefetchable)
        *-communication UNCLAIMED
             description: Communication controller
             product: ES2898 Modem
             vendor: ESS Technology
             physical id: 6
             bus info: pci@0000:01:06.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: cap_list
             configuration: latency=0
             resources: ioport:cc00(size=8)
        *-network
             description: Ethernet interface
             product: RTL-8110SC/8169SC Gigabit Ethernet
             vendor: Realtek Semiconductor Co., Ltd.
             physical id: 8
             bus info: pci@0000:01:08.0
             logical name: eth0
             version: 10
             serial: 00:18:37:01:31:b5
             width: 32 bits
             clock: 66MHz
             capabilities: bus_master cap_list rom ethernet physical
             configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.44.133 latency=64 maxlatency=64 mingnt=32 multicast=yes
             resources: irq:18 ioport:c800(size=256) memory:fd8ff000-fd8ff0ff memory:fdf00000-fdf1ffff(prefetchable)
     *-multimedia
          description: Audio device
          product: MCP61 High Definition Audio
          vendor: nVidia Corporation
          physical id: 5
          bus info: pci@0000:00:05.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: bus_master cap_list
          configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
          resources: irq:20 memory:fe028000-fe02bfff
     *-ide:0
          description: IDE interface
          product: MCP61 IDE
          vendor: nVidia Corporation
          physical id: 6
          bus info: pci@0000:00:06.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: ide bus_master cap_list
          configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
          resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16)
     *-ide:1
          description: IDE interface
          product: MCP61 SATA Controller
          vendor: nVidia Corporation
          physical id: 8
          bus info: pci@0000:00:08.0
          version: a2
          width: 32 bits
          clock: 66MHz
          capabilities: ide bus_master cap_list
          configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
          resources: irq:23 ioport:9f0(size=8) ioport:bf0(size=4) ioport:970(size=8) ioport:b70(size=4) ioport:dc00(size=16) memory:fe02d000-fe02dfff
     *-pci:1
          description: PCI bridge
          product: MCP61 PCI Express bridge
          vendor: nVidia Corporation
          physical id: 9
          bus info: pci@0000:00:09.0
          version: a2
          width: 32 bits
          clock: 33MHz
          capabilities: pci bus_master cap_list
          configuration: driver=pcieport
          resources: irq:0 ioport:b000(size=4096) memory:fde00000-fdefffff ioport:fdd00000(size=1048576)
     *-pci:2
          description: PCI bridge
          product: MCP61 PCI Express bridge
          vendor: nVidia Corporation
          physical id: b
          bus info: pci@0000:00:0b.0
          version: a2
          width: 32 bits
          clock: 33MHz
          capabilities: pci bus_master cap_list
          configuration: driver=pcieport
          resources: irq:0 ioport:a000(size=4096) memory:fdc00000-fdcfffff ioport:fdb00000(size=1048576)
     *-pci:3
          description: PCI bridge
          product: MCP61 PCI Express bridge
          vendor: nVidia Corporation
          physical id: c
          bus info: pci@0000:00:0c.0
          version: a2
          width: 32 bits
          clock: 33MHz
          capabilities: pci bus_master cap_list
          configuration: driver=pcieport
          resources: irq:0 ioport:9000(size=4096) memory:fda00000-fdafffff ioport:fd900000(size=1048576)
     *-display
          description: VGA compatible controller
          product: C61 [GeForce 6100 nForce 405]
          vendor: nVidia Corporation
          physical id: d
          bus info: pci@0000:00:0d.0
          version: a2
          width: 64 bits
          clock: 66MHz
          capabilities: bus_master cap_list rom
          configuration: driver=nvidia latency=0
          resources: irq:23 memory:fb000000-fbffffff memory:e0000000-efffffff(prefetchable) memory:fc000000-fcffffff memory:80000000-8001ffff(prefetchable)
     *-pci:4
          description: Host bridge
          product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
          vendor: Advanced Micro Devices [AMD]
          physical id: 100
          bus info: pci@0000:00:18.0
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:5
          description: Host bridge
          product: K8 [Athlon64/Opteron] Address Map
          vendor: Advanced Micro Devices [AMD]
          physical id: 101
          bus info: pci@0000:00:18.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:6
          description: Host bridge
          product: K8 [Athlon64/Opteron] DRAM Controller
          vendor: Advanced Micro Devices [AMD]
          physical id: 102
          bus info: pci@0000:00:18.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:7
          description: Host bridge
          product: K8 [Athlon64/Opteron] Miscellaneous Control
          vendor: Advanced Micro Devices [AMD]
          physical id: 103
          bus info: pci@0000:00:18.3
          version: 00
          width: 32 bits
          clock: 33MHz
          configuration: driver=k8temp
          resources: irq:0
  *-scsi
       physical id: 1
       bus info: scsi@5
       logical name: scsi5
       capabilities: scsi-host
       configuration: driver=usb-storage
  *-network DISABLED
       description: Ethernet interface
       physical id: 2
       logical name: vboxnet0
       serial: 0a:00:27:00:00:00
       capabilities: ethernet physical
       configuration: broadcast=yes multicast=yes

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007bee0000 (usable)
[ 0.000000] BIOS-e820: 000000007bee0000 - 000000007bee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bee3000 - 000000007bef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bef0000 - 000000007bf00000 (reserved)
[ 0.000000] BIOS-e820: 000000007c000000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7bee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 base 0060000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0070000000 mask FFF8000000 write-back
[ 0.000000] 4 base 0078000000 mask FFFC000000 write-back
[ 0.000000] 5 base 007BF00000 mask FFFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007bee0000 (usable)
[ 0.000000] modified: 000000007bee0000 - 000000007bee3000 (ACPI NVS)
[ 0.000000] modified: 000000007bee3000 - 000000007bef0000 (ACPI data)
[ 0.000000] modified: 000000007bef0000 - 000000007bf00000 (reserved)
[ 0.000000] modified: 000000007c000000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37825000 - 37fefc3e
[ 0.000000] Allocated new RAMDISK: 008e2000 - 010acc3e
[ 0.000000] Move RAMDISK from 0000000037825000 - 0000000037fefc3d to 008e2000 - 010acc3d
[ 0.000000] ACPI: RSDP 000f7a10 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 7bee3040 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP 7bee30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 7bee3180 06395 (v01 NVIDIA NVDAACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7bee0000 00040
[ 0.000000] ACPI: SSDT 7bee9640 000F4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: _HPT 7bee9780 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG 7bee9800 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC 7bee9580 0007C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1094MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008de000 - 00008e111d] BRK ==> [00008de000 - 00008e111d]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e2000 - 00010acc3e] NEW RAMDISK ==> [00008e2000 - 00010acc3e]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f3a00] f3a00
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007bee0
[ 0.000000] On node 0 totalpages: 507503
[ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c10ae200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2190 pages used for memmap
[ 0.000000] HighMem zone: 278100 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u2097152
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503537
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=680546e8-fe48-43ab-bf8f-21f4a06e51ff ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10152000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bee0)
[ 0.000000] Memory: 1986296k/2030464k available (4679k kernel code, 42812k reserved, 2124k data, 660k init, 1121160k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB)
[ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2009.192 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.38 BogoMIPS (lpj=8036768)
[ 0.008020] Security Framework initialized
[ 0.008038] AppArmor: AppArmor initialized
[ 0.008045] Mount-cache hash table entries: 512
[ 0.008158] Initializing cgroup subsys ns
[ 0.008162] Initializing cgroup subsys cpuacct
[ 0.008165] Initializing cgroup subsys memory
[ 0.008172] Initializing cgroup subsys devices
[ 0.008174] Initializing cgroup subsys freezer
[ 0.008177] Initializing cgroup subsys net_cls
[ 0.008193] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008196] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008200] mce: CPU supports 5 MCE banks
[ 0.008210] using C1E aware idle routine
[ 0.008216] Performance Events: AMD PMU driver.
[ 0.008222] ... version: 0
[ 0.008224] ... bit width: 48
[ 0.008226] ... generic registers: 4
[ 0.008228] ... value mask: 0000ffffffffffff
[ 0.008230] ... max period: 00007fffffffffff
[ 0.008232] ... fixed-purpose events: 0
[ 0.008234] ... event mask: 000000000000000f
[ 0.008238] Checking 'hlt' instruction... OK.
[ 0.024591] SMP alternatives: switching to UP code
[ 0.030227] ACPI: Core revision 20090903
[ 0.039582] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.039588] ftrace: allocating 21780 entries in 43 pages
[ 0.040075] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040532] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.081767] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (4018.38 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] devtmpfs: initialized
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 10:40:53 Date: 09/11/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.084001] PCI: MCFG area at f0000000 reserved in E820
[ 0.084001] PCI: Using MMCONFIG for extended config space
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084001] bio: create slab <bio-0> at 0
[ 0.084001] ACPI: EC: Look up EC in DSDT
[ 0.089613] ACPI: Interpreter enabled
[ 0.089622] ACPI: (supports S0 S3 S4 S5)
[ 0.089644] ACPI: Using IOAPIC for interrupt routing
[ 0.098300] ACPI: No dock devices found.
[ 0.099185] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.099393] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[ 0.099404] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.099409] pci 0000:00:01.1: reg 24 io port: [0xf400-0xf43f]
[ 0.099428] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.099433] pci 0000:00:01.1: PME# disabled
[ 0.099481] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.099503] pci 0000:00:02.0: supports D1 D2
[ 0.099505] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099508] pci 0000:00:02.0: PME# disabled
[ 0.099531] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.099556] pci 0000:00:02.1: supports D1 D2
[ 0.099559] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099562] pci 0000:00:02.1: PME# disabled
[ 0.099624] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe028000-0xfe02bfff]
[ 0.099650] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.099653] pci 0000:00:05.0: PME# disabled
[ 0.099686] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.099718] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.099722] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.099726] pci 0000:00:08.0: reg 18 io port: [0x970-0x977]
[ 0.099730] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73]
[ 0.099734] pci 0000:00:08.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.099738] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.099786] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099789] pci 0000:00:09.0: PME# disabled
[ 0.099820] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099822] pci 0000:00:0b.0: PME# disabled
[ 0.099852] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099855] pci 0000:00:0c.0: PME# disabled
[ 0.099874] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.099879] pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.099884] pci 0000:00:0d.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[ 0.099890] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.100006] pci 0000:01:06.0: reg 10 io port: [0xcc00-0xcc07]
[ 0.100038] pci 0000:01:06.0: supports D2
[ 0.100041] pci 0000:01:06.0: PME# supported from D0 D2 D3hot
[ 0.100044] pci 0000:01:06.0: PME# disabled
[ 0.100069] pci 0000:01:08.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.100075] pci 0000:01:08.0: reg 14 32bit mmio: [0xfd8ff000-0xfd8ff0ff]
[ 0.100094] pci 0000:01:08.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.100107] pci 0000:01:08.0: supports D1 D2
[ 0.100109] pci 0000:01:08.0: PME# supported from D1 D2 D3hot D3cold
[ 0.100113] pci 0000:01:08.0: PME# disabled
[ 0.100138] pci 0000:00:04.0: transparent bridge
[ 0.100141] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
[ 0.100144] pci 0000:00:04.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
[ 0.100148] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.100183] pci 0000:00:09.0: bridge io port: [0xb000-0xbfff]
[ 0.100187] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.100191] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.100224] pci 0000:00:0b.0: bridge io port: [0xa000-0xafff]
[ 0.100227] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.100231] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.100265] pci 0000:00:0c.0: bridge io port: [0x9000-0x9fff]
[ 0.100268] pci 0000:00:0c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.100272] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.100281] pci_bus 0000:00: on NUMA node 0
[ 0.100285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.100496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.141309] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.141449] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[ 0.141588] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 0.141724] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.141862] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.141999] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.142136] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.142273] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.142411] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
[ 0.142548] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.142687] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.142823] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.142962] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.143099] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.143238] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.143381] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.143524] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.143665] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.143807] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.143985] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.144167] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.144339] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.144512] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.144685] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.144858] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.145031] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.145204] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.145377] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.145551] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.145725] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.145900] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.146075] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.146249] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.146423] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.146597] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.146772] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.146946] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.147124] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.147232] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.147237] vgaarb: loaded
[ 0.147347] SCSI subsystem initialized
[ 0.147406] libata version 3.00 loaded.
[ 0.147469] usbcore: registered new interface driver usbfs
[ 0.147481] usbcore: registered new interface driver hub
[ 0.147503] usbcore: registered new device driver usb
[ 0.147622] ACPI: WMI: Mapper loaded
[ 0.147623] PCI: Using ACPI for IRQ routing
[ 0.147740] NetLabel: Initializing
[ 0.147742] NetLabel: domain hash size = 128
[ 0.147743] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.147755] NetLabel: unlabeled traffic allowed by default
[ 0.149423] AppArmor: AppArmor Filesystem Enabled
[ 0.149438] pnp: PnP ACPI init
[ 0.149452] ACPI: bus type pnp registered
[ 0.155005] pnp: PnP ACPI: found 14 devices
[ 0.155007] ACPI: ACPI bus type pnp unregistered
[ 0.155011] PnPBIOS: Disabled by ACPI PNP
[ 0.155022] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.155025] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.155028] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.155031] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.155034] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.155037] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.155041] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.155044] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.155048] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.155052] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.155055] system 00:01: iomem range 0x7c000000-0x7fffffff has been reserved
[ 0.155061] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.155065] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.155068] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.155075] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.155081] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
[ 0.155085] system 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.155088] system 00:0d: iomem range 0x7bee0000-0x7befffff could not be reserved
[ 0.155091] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.155095] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.155098] system 00:0d: iomem range 0x100000-0x7bedffff could not be reserved
[ 0.155102] system 00:0d: iomem range 0x7bf00000-0x7fefffff could not be reserved
[ 0.155105] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.155109] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.155112] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.155116] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.155119] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.155123] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.189792] Switching to clocksource acpi_pm
[ 0.189889] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.189892] pci 0000:00:04.0: IO window: 0xc000-0xcfff
[ 0.189896] pci 0000:00:04.0: MEM window: 0xfd800000-0xfd8fffff
[ 0.189900] pci 0000:00:04.0: PREFETCH window: 0xfdf00000-0xfdffffff
[ 0.189905] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.189908] pci 0000:00:09.0: IO window: 0xb000-0xbfff
[ 0.189911] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff
[ 0.189914] pci 0000:00:09.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.189918] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.189921] pci 0000:00:0b.0: IO window: 0xa000-0xafff
[ 0.189925] pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.189928] pci 0000:00:0b.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.189932] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.189935] pci 0000:00:0c.0: IO window: 0x9000-0x9fff
[ 0.189938] pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff
[ 0.189941] pci 0000:00:0c.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.189950] pci 0000:00:04.0: setting latency timer to 64
[ 0.189955] pci 0000:00:09.0: setting latency timer to 64
[ 0.189960] pci 0000:00:0b.0: setting latency timer to 64
[ 0.189965] pci 0000:00:0c.0: setting latency timer to 64
[ 0.189969] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.189972] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.189975] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.189978] pci_bus 0000:01: resource 1 mem: [0xfd800000-0xfd8fffff]
[ 0.189981] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.189984] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.189987] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.189990] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.189992] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.189995] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.189998] pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
[ 0.190001] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.190004] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.190007] pci_bus 0000:04: resource 0 io: [0x9000-0x9fff]
[ 0.190010] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.190013] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.190045] NET: Registered protocol family 2
[ 0.190130] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.190441] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.191013] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.191286] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.191289] TCP reno registered
[ 0.191371] NET: Registered protocol family 1
[ 0.204082] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.204129] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.204184] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.204239] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.204297] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.204359] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.204364] pci 0000:00:0d.0: Boot video device
[ 0.204533] cpufreq-nforce2: No nForce2 chipset.
[ 0.204558] Scanning for low memory corruption every 60 seconds
[ 0.204649] audit: initializing netlink socket (disabled)
[ 0.204657] type=2000 audit(1284201653.204:1): initialized
[ 0.214716] Trying to unpack rootfs image as initramfs...
[ 0.228103] highmem bounce pool size: 64 pages
[ 0.228109] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.229500] VFS: Disk quotas dquot_6.5.2
[ 0.229557] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.230080] fuse init (API version 7.13)
[ 0.230158] msgmni has been set to 1691
[ 0.236356] alg: No test for stdrng (krng)
[ 0.236433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.236436] io scheduler noop registered
[ 0.236438] io scheduler anticipatory registered
[ 0.236440] io scheduler deadline registered
[ 0.236480] io scheduler cfq registered (default)
[ 0.236582] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.236631] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.236674] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.236713] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.236734] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.236823] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.236827] ACPI: Power Button [PWRB]
[ 0.236885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.236887] ACPI: Power Button [PWRF]
[ 0.236933] fan PNP0C0B:00: registered as cooling_device0
[ 0.236938] ACPI: Fan [FAN] (on)
[ 0.237291] processor LNXCPU:00: registered as cooling_device1
[ 0.241941] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.241947] ACPI: Thermal Zone [THRM] (40 C)
[ 0.245202] isapnp: Scanning for PnP cards...
[ 0.250825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.250918] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.251206] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.252252] brd: module loaded
[ 0.252717] loop: module loaded
[ 0.252798] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.252955] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.253305] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.253310] alloc irq_desc for 23 on node -1
[ 0.253312] alloc kstat_irqs on node -1
[ 0.253322] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.253338] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.253345] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.253632] Fixed MDIO Bus: probed
[ 0.253665] PPP generic driver version 2.4.2
[ 0.253700] tun: Universal TUN/TAP device driver, 1.6
[ 0.253702] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.253777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.254073] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.254076] alloc irq_desc for 22 on node -1
[ 0.254078] alloc kstat_irqs on node -1
[ 0.254085] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.254099] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.254102] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.254133] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.254155] ehci_hcd 0000:00:02.1: debug port 1
[ 0.254162] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.254182] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.303665] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.303785] usb usb1: configuration #1 chosen from 1 choice
[ 0.303812] hub 1-0:1.0: USB hub found
[ 0.303822] hub 1-0:1.0: 8 ports detected
[ 0.303880] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.304254] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 0.304259] alloc irq_desc for 21 on node -1
[ 0.304261] alloc kstat_irqs on node -1
[ 0.304270] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[ 0.304284] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.304287] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.304323] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.304350] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[ 0.393742] usb usb2: configuration #1 chosen from 1 choice
[ 0.393771] hub 2-0:1.0: USB hub found
[ 0.393781] hub 2-0:1.0: 8 ports detected
[ 0.393839] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.393932] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.396171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.396178] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.396301] mice: PS/2 mouse device common for all mice
[ 0.396420] rtc_cmos 00:04: RTC can wake from S4
[ 0.396457] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.396491] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.396600] device-mapper: uevent: version 1.0.3
[ 0.396699] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 0.399018] device-mapper: multipath: version 1.1.0 loaded
[ 0.399021] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.400294] EISA: Probing bus 0 at eisa.0
[ 0.400300] Cannot allocate resource for EISA slot 1
[ 0.400302] Cannot allocate resource for EISA slot 2
[ 0.400319] EISA: Detected 0 cards.
[ 0.403606] cpuidle: using governor ladder
[ 0.403609] cpuidle: using governor menu
[ 0.404070] TCP cubic registered
[ 0.404224] NET: Registered protocol family 10
[ 0.404691] lo: Disabled Privacy Extensions
[ 0.405033] NET: Registered protocol family 17
[ 0.405061] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 0.405101] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
[ 0.405103] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
[ 0.405106] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 0.405142] Using IPI No-Shortcut mode
[ 0.405224] PM: Resume from disk failed.
[ 0.405236] registered taskstats version 1
[ 0.405466] Magic number: 10:37:679
[ 0.405560] rtc_cmos 00:04: setting system clock to 2010-09-11 10:40:54 UTC (1284201654)
[ 0.405563] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.405565] EDD information not available.
[ 0.413612] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.659671] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 0.675988] Freeing initrd memory: 7979k freed
[ 0.810249] isapnp: No Plug & Play device found
[ 0.810270] Freeing unused kernel memory: 660k freed
[ 0.810727] Write protecting the kernel text: 4680k
[ 0.810761] Write protecting the kernel read-only data: 1844k
[ 0.829505] udev: starting version 151
[ 0.830293] usb 1-3: configuration #1 chosen from 1 choice
[ 0.894049] Initializing USB Mass Storage driver...
[ 0.913988] scsi0 : SCSI emulation for USB Mass Storage devices
[ 0.916185] xor: automatically using best checksumming function: pIII_sse
[ 0.936011] pIII_sse : 5975.000 MB/sec
[ 0.936014] xor: using function: pIII_sse (5975.000 MB/sec)
[ 0.961703] usbcore: registered new interface driver usb-storage
[ 0.961707] USB Mass Storage support registered.
[ 0.962255] usb-storage: device found at 2
[ 0.962257] usb-storage: waiting for device to settle before scanning
[ 1.074938] pata_amd 0000:00:06.0: version 0.4.1
[ 1.074978] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.075394] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.075718] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.075723] alloc irq_desc for 18 on node -1
[ 1.075725] alloc kstat_irqs on node -1
[ 1.075735] r8169 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 1.075755] r8169 0000:01:08.0: no PCI Express capability
[ 1.076388] eth0: RTL8169sc/8110sc at 0xf80de000, 00:18:37:01:31:b5, XID 18000000 IRQ 18
[ 1.080315] scsi1 : pata_amd
[ 1.080434] scsi2 : pata_amd
[ 1.081115] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.081119] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.081278] sata_nv 0000:00:08.0: version 3.5
[ 1.081286] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.081324] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.081464] scsi3 : sata_nv
[ 1.081561] scsi4 : sata_nv
[ 1.081718] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 1.081721] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 1.091908] FDC 0 is a post-1991 82077
[ 1.308519] ata1.00: ATA-6: Maxtor 96147H6, ZAH814Y0, max UDMA/100
[ 1.308522] ata1.00: 120064896 sectors, multi 16: LBA
[ 1.308792] ata1.01: ATA-6: ST380013A, 8.01, max UDMA/100
[ 1.308795] ata1.01: 156301488 sectors, multi 16: LBA48
[ 1.308819] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x1f)
[ 1.308825] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x1f)
[ 1.324452] ata1.00: configured for UDMA/100
[ 1.340422] ata1.01: configured for UDMA/100
[ 1.340518] scsi 1:0:0:0: Direct-Access ATA Maxtor 96147H6 ZAH8 PQ: 0 ANSI: 5
[ 1.340653] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.340883] scsi 1:0:1:0: Direct-Access ATA ST380013A 8.01 PQ: 0 ANSI: 5
[ 1.340989] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 1.341051] ata2: port disabled. ignoring.
[ 1.341095] sd 1:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.341244] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.341247] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.341269] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.341391] sdb: sdb1 sdb2 <
[ 1.344074] sd 1:0:0:0: [sda] 120064896 512-byte logical blocks: (61.4 GB/57.2 GiB)
[ 1.357501] sd 1:0:0:0: [sda] Write Protect is off
[ 1.357504] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.357526] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.357574] sdb5 >
[ 1.357998] sda: sda1 sda2 < sda5
[ 1.420472] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.420487] sda6 >
[ 1.420914] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.548044] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.573136] ata3.00: ATA-7: WDC WD5000AAJS-00TKA0, 12.01C01, max UDMA/133
[ 1.573139] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.589160] ata3.00: configured for UDMA/133
[ 1.589230] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAJS-0 12.0 PQ: 0 ANSI: 5
[ 1.589353] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.589532] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.589573] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.589576] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.589597] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.589714] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 >
[ 1.635982] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.910274] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.917204] device-mapper: dm-raid45: initialized v0.2594b
[ 5.960249] usb-storage: device scan complete
[ 13.119619] Adding 38853160k swap on /dev/mapper/nvidia_gbbeddeb6. Priority:-1 extents:1 across:38853160k
[ 13.221026] udev: starting version 151
[ 13.342403] lp: driver loaded but no devices found
[ 13.378010] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 13.381373] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 13.381393] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 13.401859] vga16fb: initializing
[ 13.401864] vga16fb: mapped to 0xc00a0000
[ 13.401925] fb0: VGA16 VGA frame buffer device
[ 13.624149] psmouse serio1: ID: 10 00 64
[ 13.654085] Linux agpgart interface v0.103
[ 13.697296] logips2pp: Detected unknown logitech mouse model 6
[ 13.736428] parport_pc 00:09: reported by Plug and Play ACPI
[ 13.736489] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 13.806959] nvidia: module license 'NVIDIA' taints kernel.
[ 13.806964] Disabling lock debugging due to kernel taint
[ 14.915123] lp0: using parport0 (interrupt-driven).
[ 14.991345] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 15.062071] ppdev: user-space parallel port driver
[ 15.326948] type=1505 audit(1284226869.418:2): operation="profile_load" pid=688 name="/sbin/dhclient3"
[ 15.327224] type=1505 audit(1284226869.418:3): operation="profile_load" pid=688 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.327381] type=1505 audit(1284226869.418:4): operation="profile_load" pid=688 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.560966] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 15.560971] alloc irq_desc for 20 on node -1
[ 15.560973] alloc kstat_irqs on node -1
[ 15.560984] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 15.560987] hda_intel: Disable MSI for Nvidia chipset
[ 15.561021] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 15.624168] Console: switching to colour frame buffer device 80x30
[ 15.985930] type=1505 audit(1284226870.078:5): operation="profile_load" pid=857 name="/usr/share/gdm/guest-session/Xsession"
[ 16.001334] type=1505 audit(1284226870.094:6): operation="profile_replace" pid=861 name="/sbin/dhclient3"
[ 16.001625] type=1505 audit(1284226870.094:7): operation="profile_replace" pid=861 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.001786] type=1505 audit(1284226870.094:8): operation="profile_replace" pid=861 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.023278] type=1505 audit(1284226870.114:9): operation="profile_load" pid=863 name="/usr/bin/evince"
[ 16.035635] type=1505 audit(1284226870.126:10): operation="profile_load" pid=863 name="/usr/bin/evince-previewer"
[ 16.049263] type=1505 audit(1284226870.142:11): operation="profile_load" pid=863 name="/usr/bin/evince-thumbnailer"
[ 16.143621] r8169: eth0: link up
[ 16.248219] hda_codec: ALC883: BIOS auto-probing.
[ 16.472126] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 16.684678] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 16.684685] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, low) -> IRQ 23
[ 16.684691] nvidia 0000:00:0d.0: setting latency timer to 64
[ 16.684696] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.684922] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 26.568025] eth0: no IPv6 routers present
[ 26.922887] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 26.922892] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 26.922894] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 26.922895] vboxdrv: the usage of hardware performance counters by
[ 26.922897] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 26.922900] vboxdrv: Found 1 processor cores.
[ 26.925367] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 26.925371] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[ 26.928580] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 37.172028] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 53.416028] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 53.664024] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 63.908026] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 64.041368] scsi 0:0:0:0: Device offlined - not ready after error recovery
[ 88.080026] Clocksource tsc unstable (delta = -249982553 ns)
[22440.463664] usbcore: deregistering interface driver usb-storage
[22465.964118] Initializing USB Mass Storage driver...
[22465.964299] scsi5 : SCSI emulation for USB Mass Storage devices
[22465.973891] usbcore: registered new interface driver usb-storage
[22465.973899] USB Mass Storage support registered.
[22465.976923] usb-storage: device found at 2
[22465.976929] usb-storage: waiting for device to settle before scanning
[22470.976311] usb-storage: device scan complete
[22492.112071] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[22502.356169] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[22518.600076] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[22518.848245] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[22529.092080] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[22529.225395] scsi 5:0:0:0: Device offlined - not ready after error recovery