cd drive not being detected

Can you give the output of:

sudo lsb_release -a; uname -a; echo; sudo lshw -C disk; sudo lshw -C drive

Thanks

No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.10
Release: 10.10
Codename: maverick
Linux jon-HPE-410f 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux

PCI (sysfs)
  *-disk
       description: ATA Disk
       product: Hitachi HDS72101
       vendor: Hitachi
       physical id: 0.0.0
       bus info: scsi@0:0.0.0
       logical name: /dev/sda
       version: JP4O
       serial: JP2940HD1L0B2C
       size: 931GiB (1TB)
       capabilities: partitioned partitioned:dos
       configuration: ansiversion=5 signature=000bd4ab
  *-disk:0
       description: SCSI Disk
       physical id: 0.0.0
       bus info: scsi@4:0.0.0
       logical name: /dev/sdb
  *-disk:1
       description: SCSI Disk
       physical id: 0.0.1
       bus info: scsi@4:0.0.1
       logical name: /dev/sdc
  *-disk:2
       description: SCSI Disk
       physical id: 0.0.2
       bus info: scsi@4:0.0.2
       logical name: /dev/sdd
  *-disk:3
       description: SCSI Disk
       product: MS/MS-Pro
       vendor: Generic-
       physical id: 0.0.3
       bus info: scsi@4:0.0.3
       logical name: /dev/sde
       version: 1.03
       serial: 3
       capabilities: removable
     *-medium
          physical id: 0
          logical name: /dev/sde
  *-disk
       description: SCSI Disk
       product: My Book
       vendor: WD
       physical id: 0.0.0
       bus info: scsi@5:0.0.0
       logical name: /dev/sdf
       version: 1025
       size: 465GiB (500GB)
       capabilities: partitioned partitioned:dos
       configuration: ansiversion=4 signature=41ffc810

Hmmm, no optical drive.

Can you reboot, login then run:

dmesg > ~/dmesg.txt; gedit ~/dmesg.txt; rm ~/dmesg.txt

What is output?

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-25-generic (buildd@crested) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 (Ubuntu 2.6.35-25.44-generic 2.6.35.10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=f78bc93f-1fab-4e85-a570-c63e37015e21 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a400 (usable)
[ 0.000000] BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009a400 (usable)
[ 0.000000] modified: 000000000009a400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] modified: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
[ 0.000000] modified: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffb0000 @ 16000-19000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 18000-1a000
[ 0.000000] RAMDISK: 36eae000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb030 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000cffb0100 0006C (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffb0290 000F4 (v03 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000cffb05d0 04AB6 (v01 HPQOEM SLIC-CPC 00000721 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffbe000 00040
[ 0.000000] ACPI: APIC 00000000cffb0390 0007C (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffb0410 0003C (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000cffb0450 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: OEMB 00000000cffbe040 00072 (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffba6b0 00843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
[ 0.000000] ACPI: SRAT 00000000cffbaf00 00108 (v03 HPQOEM SLIC-CPC 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cffbb010 00038 (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffbb050 00DA4 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[ 0.000000] SRAT: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] SRAT: Node 0 [0,d0000000) + [100000000,230000000) -> [0,230000000)
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880100200000-ffff8801073fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cffb0
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096954
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [19000 - 197ff]
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
[ 0.000000] PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065594
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=f78bc93f-1fab-4e85-a570-c63e37015e21 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 64c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff]
[ 0.000000] Subtract (59 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [0036eae000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001d18000 - 0001d1869c] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009a400 - 00000fd890] BIOS reserved
[ 0.000000] #7 [00000fda44 - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000fd890 - 00000fda44] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE
[ 0.000000] #12 [0000018000 - 0000019000] PGTABLE
[ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #14 [0001d186c0 - 0001d196c0] BOOTMEM
[ 0.000000] #15 [0001d17140 - 0001d17740] BOOTMEM
[ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #18 [0100200000 - 0107400000] MEMMAP 0
[ 0.000000] #19 [0001d17740 - 0001d178c0] BOOTMEM
[ 0.000000] #20 [0001d196c0 - 0001d316c0] BOOTMEM
[ 0.000000] #21 [0001d316c0 - 0001d496c0] BOOTMEM
[ 0.000000] #22 [0001d4a000 - 0001d4b000] BOOTMEM
[ 0.000000] #23 [0001d178c0 - 0001d17901] BOOTMEM
[ 0.000000] #24 [0001d17940 - 0001d17983] BOOTMEM
[ 0.000000] #25 [0001d179c0 - 0001d17bf0] BOOTMEM
[ 0.000000] #26 [0001d17c00 - 0001d17c68] BOOTMEM
[ 0.000000] #27 [0001d17c80 - 0001d17ce8] BOOTMEM
[ 0.000000] #28 [0001d17d00 - 0001d17d68] BOOTMEM
[ 0.000000] #29 [0001d17d80 - 0001d17de8] BOOTMEM
[ 0.000000] #30 [0001d17e00 - 0001d17e68] BOOTMEM
[ 0.000000] #31 [0001d17e80 - 0001d17ee8] BOOTMEM
[ 0.000000] #32 [0001d17f00 - 0001d17f68] BOOTMEM
[ 0.000000] #33 [0001d17f80 - 0001d17fe8] BOOTMEM
[ 0.000000] #34 [0001d496c0 - 0001d49728] BOOTMEM
[ 0.000000] #35 [0001d49740 - 0001d49760] BOOTMEM
[ 0.000000] #36 [0001d49780 - 0001d497a0] BOOTMEM
[ 0.000000] #37 [0001d497c0 - 0001d4982a] BOOTMEM
[ 0.000000] #38 [0001d49840 - 0001d498aa] BOOTMEM
[ 0.000000] #39 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #40 [0001e40000 - 0001e5e000] BOOTMEM
[ 0.000000] #41 [0001e80000 - 0001e9e000] BOOTMEM
[ 0.000000] #42 [0001ec0000 - 0001ede000] BOOTMEM
[ 0.000000] #43 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #44 [0001f40000 - 0001f5e000] BOOTMEM
[ 0.000000] #45 [0001d498c0 - 0001d498c8] BOOTMEM
[ 0.000000] #46 [0001d49900 - 0001d49908] BOOTMEM
[ 0.000000] #47 [0001d49940 - 0001d49958] BOOTMEM
[ 0.000000] #48 [0001d49980 - 0001d499b0] BOOTMEM
[ 0.000000] #49 [0001d499c0 - 0001d49ae0] BOOTMEM
[ 0.000000] #50 [0001d49b00 - 0001d49b48] BOOTMEM
[ 0.000000] #51 [0001d49b80 - 0001d49bc8] BOOTMEM
[ 0.000000] #52 [0001d4b000 - 0001d53000] BOOTMEM
[ 0.000000] #53 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #54 [0001d49c00 - 0001d49c20] BOOTMEM
[ 0.000000] #55 [0001f5e000 - 0005f5e000] BOOTMEM
[ 0.000000] #56 [0001d53000 - 0001d73000] BOOTMEM
[ 0.000000] #57 [0001d73000 - 0001db3000] BOOTMEM
[ 0.000000] #58 [000001a800 - 0000022800] BOOTMEM
[ 0.000000] Memory: 8107488k/9175040k available (5714k kernel code, 787224k absent, 280328k reserved, 5377k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:728
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3200.234 MHz processor.
[ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.38 BogoMIPS (lpj=27001940)
[ 0.020009] pid_max: default: 32768 minimum: 301
[ 0.020022] Security Framework initialized
[ 0.020032] AppArmor: AppArmor initialized
[ 0.020032] Yama: becoming mindful.
[ 0.020538] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030224] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030945] Mount-cache hash table entries: 256
[ 0.031017] Initializing cgroup subsys ns
[ 0.031019] Initializing cgroup subsys cpuacct
[ 0.031022] Initializing cgroup subsys memory
[ 0.031027] Initializing cgroup subsys devices
[ 0.031028] Initializing cgroup subsys freezer
[ 0.031030] Initializing cgroup subsys net_cls
[ 0.031045] tseg: 0000000000
[ 0.031054] CPU: Physical Processor ID: 0
[ 0.031055] CPU: Processor Core ID: 0
[ 0.031056] mce: CPU supports 6 MCE banks
[ 0.031063] Performance Events: AMD PMU driver.
[ 0.031066] ... version: 0
[ 0.031067] ... bit width: 48
[ 0.031068] ... generic registers: 4
[ 0.031068] ... value mask: 0000ffffffffffff
[ 0.031069] ... max period: 00007fffffffffff
[ 0.031070] ... fixed-purpose events: 0
[ 0.031071] ... event mask: 000000000000000f
[ 0.032092] ACPI: Core revision 20100428
[ 0.040008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040011] ftrace: allocating 22681 entries in 89 pages
[ 0.044156] Setting APIC routing to flat
[ 0.044408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.148003] CPU0: AMD Phenom(tm) II X6 1045T Processor stepping 00
[ 0.150000] Booting Node 0, Processors #1 #2 #3 #4 #5 Ok.
[ 0.990004] Brought up 6 CPUs
[ 0.990006] Total of 6 processors activated (32400.64 BogoMIPS).
[ 0.992585] devtmpfs: initialized
[ 0.992585] regulator: core version 0.5
[ 0.992585] Time: 21:43:40 Date: 02/06/11
[ 0.992585] NET: Registered protocol family 16
[ 0.992585] node 0 link 0: io port [1000, ffffff]
[ 0.992585] TOM: 00000000d0000000 aka 3328M
[ 0.992585] Fam 10h mmconf [e0000000, efffffff]
[ 0.992585] node 0 link 0: mmio [a0000, bffff]
[ 0.992585] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.992585] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.992585] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.992585] TOM2: 0000000230000000 aka 8960M
[ 0.992585] bus: [00, 07] on node 0 link 0
[ 0.992585] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.992585] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.992585] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.992585] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.992585] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.992585] ACPI: bus type pci registered
[ 0.992585] Trying to unpack rootfs image as initramfs...
[ 0.992585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.992585] PCI: not using MMCONFIG
[ 0.992585] PCI: Using configuration type 1 for base access
[ 0.992585] PCI: Using configuration type 1 for extended access
[ 0.992585] bio: create slab <bio-0> at 0
[ 0.992585] ACPI: EC: Look up EC in DSDT
[ 0.992585] ACPI: Executed 3 blocks of module-level executable AML code
[ 1.000453] ACPI: Interpreter enabled
[ 1.000455] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.000471] ACPI: Using IOAPIC for interrupt routing
[ 1.000504] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.001414] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.021310] ACPI: No dock devices found.
[ 1.021312] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.021409] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.021599] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.021600] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.021601] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.021603] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.021604] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 1.021605] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 1.021663] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.021665] pci 0000:00:02.0: PME# disabled
[ 1.021690] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.021692] pci 0000:00:05.0: PME# disabled
[ 1.021718] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 1.021720] pci 0000:00:0a.0: PME# disabled
[ 1.021751] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 1.021756] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 1.021761] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 1.021765] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 1.021770] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 1.021775] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
[ 1.021813] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
[ 1.021854] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
[ 1.021903] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
[ 1.021942] pci 0000:00:12.2: supports D1 D2
[ 1.021943] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.021946] pci 0000:00:12.2: PME# disabled
[ 1.021968] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
[ 1.022009] pci 0000:00:13.1: reg 10: [mem 0xfe8f7000-0xfe8f7fff]
[ 1.022058] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
[ 1.022098] pci 0000:00:13.2: supports D1 D2
[ 1.022099] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.022101] pci 0000:00:13.2: PME# disabled
[ 1.022187] pci 0000:00:14.2: reg 10: [mem 0xfe8f0000-0xfe8f3fff 64bit]
[ 1.022219] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.022222] pci 0000:00:14.2: PME# disabled
[ 1.022371] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.022377] pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit]
[ 1.022380] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 1.022386] pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 1.022398] pci 0000:01:00.0: supports D1 D2
[ 1.022418] pci 0000:01:00.1: reg 10: [mem 0xfe9bc000-0xfe9bffff 64bit]
[ 1.022441] pci 0000:01:00.1: supports D1 D2
[ 1.040014] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.040018] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 1.040020] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.040023] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.040081] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
[ 1.060016] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 1.060020] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.060022] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.060025] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.060082] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
[ 1.060094] pci 0000:03:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 1.060102] pci 0000:03:00.0: reg 20: [mem 0xfdffc000-0xfdffffff 64bit pref]
[ 1.060130] pci 0000:03:00.0: supports D1 D2
[ 1.060131] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.060134] pci 0000:03:00.0: PME# disabled
[ 1.080016] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.080019] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 1.080021] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.080024] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.080098] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 1.080101] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 1.080105] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.080108] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.080110] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.080116] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.080118] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.080119] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.080121] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 1.080122] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 1.080138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.080263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.080296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 1.080334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 1.082661] ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15)
[ 1.082716] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 1.082770] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 1.082822] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 1.082874] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 1.082927] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 1.082980] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
[ 1.083032] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 1.083052] HEST: Table is not found!
[ 1.083096] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.083098] vgaarb: loaded
[ 1.083172] SCSI subsystem initialized
[ 1.083189] libata version 3.00 loaded.
[ 1.083189] usbcore: registered new interface driver usbfs
[ 1.083189] usbcore: registered new interface driver hub
[ 1.083189] usbcore: registered new device driver usb
[ 1.083189] ACPI: WMI: Mapper loaded
[ 1.083189] PCI: Using ACPI for IRQ routing
[ 1.083189] PCI: pci_cache_line_size set to 64 bytes
[ 1.083189] reserve RAM buffer: 000000000009a400 - 000000000009ffff
[ 1.083189] reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff
[ 1.083189] NetLabel: Initializing
[ 1.083189] NetLabel: domain hash size = 128
[ 1.083189] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.083189] NetLabel: unlabeled traffic allowed by default
[ 1.083189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.083189] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.083189] Switching to clocksource tsc
[ 1.084975] AppArmor: AppArmor Filesystem Enabled
[ 1.084975] pnp: PnP ACPI init
[ 1.084975] ACPI: bus type pnp registered
[ 1.086142] pnp: PnP ACPI: found 12 devices
[ 1.086144] ACPI: ACPI bus type pnp unregistered
[ 1.086152] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.086154] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.086157] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.086158] system 00:08: [io 0x040b] has been reserved
[ 1.086159] system 00:08: [io 0x04d6] has been reserved
[ 1.086161] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 1.086162] system 00:08: [io 0x0c14] has been reserved
[ 1.086163] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 1.086165] system 00:08: [io 0x0c52] has been reserved
[ 1.086166] system 00:08: [io 0x0c6c] has been reserved
[ 1.086167] system 00:08: [io 0x0c6f] has been reserved
[ 1.086169] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 1.086170] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 1.086171] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 1.086173] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 1.086174] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 1.086175] system 00:08: [io 0x0800-0x089f] has been reserved
[ 1.086177] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 1.086178] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 1.086179] system 00:08: [io 0x0900-0x090f] has been reserved
[ 1.086181] system 00:08: [io 0x0910-0x091f] has been reserved
[ 1.086182] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 1.086184] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 1.086186] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.086190] system 00:09: [io 0x0e00-0x0e0f] has been reserved
[ 1.086191] system 00:09: [io 0x0e80-0x0e8f] has been reserved
[ 1.086192] system 00:09: [io 0x0f40-0x0f4f] has been reserved
[ 1.086194] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.086197] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.086198] system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.086200] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.086201] system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
[ 1.086203] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.091711] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.091713] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 1.091715] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.091717] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.091719] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 1.091720] pci 0000:00:05.0: bridge window [io disabled]
[ 1.091722] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.091723] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 1.091725] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.091727] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 1.091729] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.091730] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.091733] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.091733] pci 0000:00:14.4: bridge window [io disabled]
[ 1.091737] pci 0000:00:14.4: bridge window [mem disabled]
[ 1.091739] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 1.091748] alloc irq_desc for 18 on node 0
[ 1.091749] alloc kstat_irqs on node 0
[ 1.091753] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.091756] pci 0000:00:02.0: setting latency timer to 64
[ 1.091759] alloc irq_desc for 17 on node 0
[ 1.091759] alloc kstat_irqs on node 0
[ 1.091762] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.091763] pci 0000:00:05.0: setting latency timer to 64
[ 1.091767] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.091768] pci 0000:00:0a.0: setting latency timer to 64
[ 1.091774] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.091775] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.091776] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.091777] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.091778] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 1.091780] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.091781] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.091782] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 1.091783] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.091785] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 1.091786] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.091787] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 1.091788] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.091790] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.091791] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.091792] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.091793] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.091795] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 1.091796] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.091816] NET: Registered protocol family 2
[ 1.091962] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.092872] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.094521] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.094727] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.094729] TCP reno registered
[ 1.094740] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.094778] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.094869] NET: Registered protocol family 1
[ 1.910104] pci 0000:01:00.0: Boot video device
[ 1.910112] PCI: CLS 64 bytes, default 64
[ 1.910825] PCI-DMA: Disabling AGP.
[ 1.910925] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.910926] PCI-DMA: using GART IOMMU.
[ 1.910928] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.913682] Scanning for low memory corruption every 60 seconds
[ 1.913763] audit: initializing netlink socket (disabled)
[ 1.913775] type=2000 audit(1297028620.910:1): initialized
[ 1.923457] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.924505] VFS: Disk quotas dquot_6.5.2
[ 1.924539] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.924991] fuse init (API version 7.14)
[ 1.925037] msgmni has been set to 15963
[ 1.925414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.925415] io scheduler noop registered
[ 1.925416] io scheduler deadline registered
[ 1.925439] io scheduler cfq registered (default)
[ 1.925571] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.925588] alloc irq_desc for 40 on node 0
[ 1.925589] alloc kstat_irqs on node 0
[ 1.925595] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.925684] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.925697] alloc irq_desc for 41 on node 0
[ 1.925698] alloc kstat_irqs on node 0
[ 1.925701] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.925770] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.925783] alloc irq_desc for 42 on node 0
[ 1.925784] alloc kstat_irqs on node 0
[ 1.925787] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.925854] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.925868] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.925971] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.925982] ACPI: Power Button [PWRB]
[ 1.926010] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.926012] ACPI: Power Button [PWRF]
[ 1.926164] ACPI: acpi_idle registered with cpuidle
[ 1.927059] ERST: Table is not found!
[ 1.927154] Linux agpgart interface v0.103
[ 1.927156] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.927790] brd: module loaded
[ 1.928019] loop: module loaded
[ 1.928245] Fixed MDIO Bus: probed
[ 1.928260] PPP generic driver version 2.4.2
[ 1.928276] tun: Universal TUN/TAP device driver, 1.6
[ 1.928277] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 1.928312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.928770] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.928794] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.928812] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.928836] ehci_hcd 0000:00:12.2: debug port 1
[ 1.928852] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
[ 1.948523] Freeing initrd memory: 17672k freed
[ 1.950026] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.950125] hub 1-0:1.0: USB hub found
[ 1.950128] hub 1-0:1.0: 6 ports detected
[ 1.950273] alloc irq_desc for 19 on node 0
[ 1.950274] alloc kstat_irqs on node 0
[ 1.950280] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.950295] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.950322] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.950345] ehci_hcd 0000:00:13.2: debug port 1
[ 1.950361] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
[ 1.980022] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.980120] hub 2-0:1.0: USB hub found
[ 1.980123] hub 2-0:1.0: 6 ports detected
[ 1.980243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.980295] alloc irq_desc for 16 on node 0
[ 1.980296] alloc kstat_irqs on node 0
[ 1.980301] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.980320] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.980342] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.980362] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
[ 2.053463] hub 3-0:1.0: USB hub found
[ 2.053471] hub 3-0:1.0: 3 ports detected
[ 2.054211] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.054221] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.054239] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.054251] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
[ 2.113456] hub 4-0:1.0: USB hub found
[ 2.113464] hub 4-0:1.0: 3 ports detected
[ 2.114201] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.114212] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.114229] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.114247] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
[ 2.173456] hub 5-0:1.0: USB hub found
[ 2.173463] hub 5-0:1.0: 3 ports detected
[ 2.174201] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.174211] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.174230] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.174243] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8f7000
[ 2.233457] hub 6-0:1.0: USB hub found
[ 2.233464] hub 6-0:1.0: 3 ports detected
[ 2.234183] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.234244] PNP: No PS/2 controller found. Probing ports directly.
[ 2.234636] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.234648] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.234707] mice: PS/2 mouse device common for all mice
[ 2.234759] rtc_cmos 00:03: RTC can wake from S4
[ 2.234779] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.234797] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.234852] device-mapper: uevent: version 1.0.3
[ 2.234985] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: <email address hidden>
[ 2.235134] device-mapper: multipath: version 1.1.1 loaded
[ 2.235136] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.235464] cpuidle: using governor ladder
[ 2.235575] cpuidle: using governor menu
[ 2.235752] TCP cubic registered
[ 2.235813] NET: Registered protocol family 10
[ 2.236009] lo: Disabled Privacy Extensions
[ 2.236108] NET: Registered protocol family 17
[ 2.236178] powernow-k8: Found 1 AMD Phenom(tm) II X6 1045T Processor (6 cpu cores) (version 2.20.00)
[ 2.236189] powernow-k8: Core Performance Boosting: on.
[ 2.236218] powernow-k8: 0 : pstate 0 (2700 MHz)
[ 2.236220] powernow-k8: 1 : pstate 1 (2000 MHz)
[ 2.236221] powernow-k8: 2 : pstate 2 (1400 MHz)
[ 2.236222] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.237178] PM: Resume from disk failed.
[ 2.237185] registered taskstats version 1
[ 2.237357] Magic number: 15:337:752
[ 2.237368] tty ttyS3: hash matches
[ 2.237455] rtc_cmos 00:03: setting system clock to 2011-02-06 21:43:41 UTC (1297028621)
[ 2.237457] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.237458] EDD information not available.
[ 2.237500] Freeing unused kernel memory: 908k freed
[ 2.237677] Write protecting the kernel read-only data: 10240k
[ 2.237836] Freeing unused kernel memory: 412k freed
[ 2.238006] Freeing unused kernel memory: 1644k freed
[ 2.260390] ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.260729] ramzswap: num_devices not specified. Using default: 1
[ 2.260730] ramzswap: Creating 1 devices ...
[ 2.264111] udev[178]: starting version 163
[ 2.277696] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.277712] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.277748] r8169 0000:03:00.0: setting latency timer to 64
[ 2.277751] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
[ 2.277775] alloc irq_desc for 43 on node 0
[ 2.277777] alloc kstat_irqs on node 0
[ 2.277786] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 2.278070] r8169 0000:03:00.0: eth0: RTL8101e at 0xffffc900117d8000, d4:85:64:11:94:23, XID 0c200000 IRQ 43
[ 2.286522] ahci 0000:00:11.0: version 3.0
[ 2.286538] alloc irq_desc for 22 on node 0
[ 2.286539] alloc kstat_irqs on node 0
[ 2.286545] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.286631] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.286634] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.287049] scsi0 : ahci
[ 2.287171] scsi1 : ahci
[ 2.287217] scsi2 : ahci
[ 2.287271] scsi3 : ahci
[ 2.287340] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
[ 2.287343] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
[ 2.287345] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
[ 2.287348] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
[ 2.392540] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 2.632557] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.634205] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.701391] Initializing USB Mass Storage driver...
[ 2.710993] scsi4 : usb-storage 2-2:1.0
[ 2.711078] usbcore: registered new interface driver usb-storage
[ 2.711080] USB Mass Storage support registered.
[ 2.834197] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 2.987365] scsi5 : usb-storage 2-6:1.0
[ 3.230047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.231249] ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3GC, max UDMA/133
[ 3.231251] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.232560] ata1.00: configured for UDMA/133
[ 3.254320] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 3.254433] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.254498] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.254524] sd 0:0:0:0: [sda] Write Protect is off
[ 3.254526] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.254537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.254634] sda: sda1 sda2 <
[ 3.290056] usb 4-2: new full speed USB device using ohci_hcd and address 2
[ 3.293317] sda5 >
[ 3.293482] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.515463] usbcore: registered new interface driver hiddev
[ 3.565934] input: Western Digital My Book as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.1/input/input2
[ 3.565973] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:13.2-2/input1
[ 3.569032] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3
[ 3.569064] generic-usb 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.1-2/input0
[ 3.574113] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input4
[ 3.574225] generic-usb 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-2/input1
[ 3.582944] generic-usb 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-2/input2
[ 3.582954] usbcore: registered new interface driver usbhid
[ 3.582955] usbhid: USB HID core driver
[ 3.735130] scsi 4:0:0:0: Direct-Access WD My Book 1025 PQ: 0 ANSI: 4
[ 3.735468] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 3.756495] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.768991] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.768993] sd 4:0:0:0: [sdb] Mode Sense: 10 00 00 00
[ 3.768995] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.802983] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.802989] sdb: sdb1
[ 3.837726] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.837728] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.980801] scsi 5:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.981307] scsi 5:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.981807] scsi 5:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.982437] scsi 5:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 3.982752] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.982833] sd 5:0:0:1: Attached scsi generic sg3 type 0
[ 3.982986] sd 5:0:0:2: Attached scsi generic sg4 type 0
[ 3.983148] sd 5:0:0:3: Attached scsi generic sg5 type 0
[ 3.986165] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 3.986792] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[ 3.987543] sd 5:0:0:2: [sde] Attached SCSI removable disk
[ 3.988174] sd 5:0:0:3: [sdf] Attached SCSI removable disk
[ 12.310041] ata3: softreset failed (device not ready)
[ 22.350033] ata3: softreset failed (device not ready)
[ 32.980036] ata3: link is slow to respond, please be patient (ready=0)
[ 57.360036] ata3: softreset failed (device not ready)
[ 57.360040] ata3: limiting SATA link speed to 1.5 Gbps
[ 62.580036] ata3: softreset failed (device not ready)
[ 62.580038] ata3: reset failed, giving up
[ 63.245553] Btrfs loaded
[ 63.248789] xor: automatically using best checksumming function: generic_sse
[ 63.288709] generic_sse: 13129.600 MB/sec
[ 63.288710] xor: using function: generic_sse (13129.600 MB/sec)
[ 63.291358] device-mapper: dm-raid45: initialized v0.2594b
[ 63.881791] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 75.557296] Adding 24004604k swap on /dev/sda5. Priority:-1 extents:1 across:24004604k
[ 75.684677] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 77.107270] udev[616]: starting version 163
[ 77.653261] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 77.966101] EDAC MC: Ver: 2.1.0 Jan 21 2011
[ 78.023414] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 78.023417] Disabling lock debugging due to kernel taint
[ 78.045275] [fglrx] Maximum main memory to use for locked dma buffers: 7769 MBytes.
[ 78.045316] [fglrx] vendor: 1002 device: 68d9 count: 1
[ 78.045533] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 78.045543] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 78.045546] pci 0000:01:00.0: setting latency timer to 64
[ 78.045743] [fglrx] Kernel PAT support is enabled
[ 78.045753] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[ 78.197666] EDAC amd64_edac: Ver: 3.3.0 Jan 21 2011
[ 78.198129] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 78.198135] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 78.198136] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 78.198137] (Note that use of the override may cause unknown side effects.)
[ 78.198151] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 78.336031] lp: driver loaded but no devices found
[ 78.397882] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 78.400299] rt2860 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 78.400345] rt2860 0000:02:00.0: setting latency timer to 64
[ 78.400445] === pAd = ffffc900117f2000, size = 528640 ===
[ 78.400446] <-- RTMPAllocAdapterBlock, Status=0
[ 78.400448] pAd->CSRBaseAddress =0xffffc900117e0000, csr_addr=0xffffc900117e0000!
[ 78.563644] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 78.703072] hda_codec: ALC888-VD: BIOS auto-probing.
[ 78.708659] Too many connections
[ 78.711181] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 78.711224] alloc irq_desc for 44 on node 0
[ 78.711225] alloc kstat_irqs on node 0
[ 78.711233] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 78.711249] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 78.778995] type=1400 audit(1297046698.028:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=919 comm="apparmor_parser"
[ 78.779022] type=1400 audit(1297046698.028:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=766 comm="apparmor_parser"
[ 78.779039] type=1400 audit(1297046698.028:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=767 comm="apparmor_parser"
[ 78.779054] type=1400 audit(1297046698.028:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1008 comm="apparmor_parser"
[ 78.779196] type=1400 audit(1297046698.028:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=919 comm="apparmor_parser"
[ 78.779216] type=1400 audit(1297046698.028:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser"
[ 78.779230] type=1400 audit(1297046698.028:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=767 comm="apparmor_parser"
[ 78.779245] type=1400 audit(1297046698.028:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1008 comm="apparmor_parser"
[ 78.779302] type=1400 audit(1297046698.028:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=919 comm="apparmor_parser"
[ 78.779323] type=1400 audit(1297046698.028:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser"
[ 79.649921] RX DESC ffff880005843000 size = 2048
[ 79.650087] <-- RTMPAllocTxRxRingMemory, Status=0
[ 79.652443] 1. Phy Mode = 0
[ 79.652444] 2. Phy Mode = 0
[ 79.652445] NVM is Efuse and its size =2d[2d0-2fc]
[ 79.653322] 3. Phy Mode = 0
[ 79.675524] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 79.675525] MCS Set = 00 00 00 00 00
[ 79.687889] <==== rt28xx_init, Status=0
[ 79.687940] 0x1300 = 00073200
[ 79.687952] AUX_CTRL = 0x c02
[ 79.687955] Read AUX_CTRL = 0xc02
[ 79.687956] Write AUX_CTRL = 0x1c02
[ 79.687958] OSC_CTRL = 0x3ff11
[ 79.689385] ====> rt30xx Read PowerLevelMode = 0x3.
[ 79.689387] ====> rt30xx F Write 0x83 Command = 0x3.
[ 79.742195] RX DESC ffff880005827000 size = 2048
[ 79.742358] <-- RTMPAllocTxRxRingMemory, Status=0
[ 79.744993] 1. Phy Mode = 0
[ 79.744994] 2. Phy Mode = 0
[ 79.744995] NVM is Efuse and its size =2d[2d0-2fc]
[ 79.745917] 3. Phy Mode = 0
[ 79.747890] MCS Set = 00 00 00 00 00
[ 79.760320] <==== rt28xx_init, Status=0
[ 79.760372] 0x1300 = 00073200
[ 79.760384] AUX_CTRL = 0x 1d42
[ 79.760386] Read AUX_CTRL = 0x1d42
[ 79.760388] Write AUX_CTRL = 0x1d42
[ 79.760389] OSC_CTRL = 0x3ff11
[ 79.761645] ====> rt30xx Read PowerLevelMode = 0x3.
[ 79.761647] ====> rt30xx F Write 0x83 Command = 0x3.
[ 79.763616] r8169 0000:03:00.0: eth0: link down
[ 79.764189] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 80.666231] ppdev: user-space parallel port driver
[ 81.377506] alloc irq_desc for 45 on node 0
[ 81.377508] alloc kstat_irqs on node 0
[ 81.377515] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[ 81.378621] [fglrx] Firegl kernel thread PID: 1300
[ 81.378845] [fglrx] IRQ 45 Enabled
[ 81.638321] [fglrx] Gart USWC size:1280 M.
[ 81.638323] [fglrx] Gart cacheable size:508 M.
[ 81.638326] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 81.638328] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 81.638329] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 81.995762] kvm: disabled by bios
[ 82.678168] vboxdrv: Found 6 processor cores.
[ 82.679314] VBoxDrv: dbg - g_abExecMemory=ffffffffa06085e0
[ 82.679314] vboxdrv: fAsync=0 offMin=0x4a5 offMax=0x74dc
[ 82.679314] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 82.679314] vboxdrv: Successfully loaded version 4.0.2 (interface 0x00160000).
[ 85.589714] ===>rt_ioctl_giwscan. 19(19) BSS returned, data->length = 3724
[ 88.426209] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 90.610025] wlan0: no IPv6 routers present
[ 99.272148] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 344.341527] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2706
[ 344.341799] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 373.486371] ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 2380
[ 413.480998] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2806
[ 419.173321] lo: Disabled Privacy Extensions
[ 420.559165] ===>rt_ioctl_giwscan. 19(19) BSS returned, data->length = 3556
[ 420.559412] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)

for some reason when I go to update my linux I'm using ubuntu ultimate edition and I installed it off a usb but when I update it says CD/DVD 'Ubuntu 10.10 _Maverick Meerkat_ - Release amd64 (20101007)' is required

Please insert the above CD/DVD into the drive '/cdrom/' to install software packages from it.

But my cd drive doesnt work??? haha no idea what to do

so the reason I didn't install it from the CD was because I got this error initramfs unable to find a medium containing a live file system

fixed the update problem it was only because I had cd rom ubuntu 10.10 maverik meerkat checked under installable from CD rom

Ultimate isn't supported here.

Many releases are based on Ubuntu but are equally not supported here, they include (but are not isolated to):
Ultimate
MoonOs
CrunchBang
Fluxbuntu
BackTrack

Please post on the Ultimate forums or install an official release by Canonical.

http://forumubuntusoftware.info/

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/668392

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/668392

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/668392