Ubuntu
unity package

slow start up, slow behaviour, slow update

Asked by Andres Muniz

Hi, recently updated from 10.04 to 10.10 on my acer aspire one 110. SSD: two years ago It had linpus, ever since ubuntu netbook.

The update took about 13hrs instalation was more than 12hrs. The download was not that bad (it was about 1.5Gb). The initial caluculation was of about 17hrs so I managed to trim off 5 hrs there.

Everytime I turn on the laptop it is very slow, there is some messages but they are very quick, I don't know how to recover them. I think something it is unable to load. Then a good amount of time is spent in a black screen. I haven't taken note of how much time but it is slower than 10.04. Slower than my wife’s W7 with antivirus and all (which is a bit embarrassing).

General use seems fine except for other problems I have found that I have reported.

The launch bar seems to have a life of it's own: it folds and unfolds at a pace I find difficult to catch up. I was expecting not to loose some of the icons over the top or down the bottom...

pressing the home button sometimes shows the quick launch number buttons. But other times doesn't show anything.

Are these things my fault? I don't think I tweaked the settings in any special way.

But just to let ubuntu developers know: even with all these problems. I like what has been done and the potential of what it can be. Thank you.

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu unity Edit question
Assignee:
No assignee Edit question
Solved by:
Tommy Trussell
Solved:
Last query:
Last reply:
Revision history for this message
François Tissandier (baloo) said : 		#1

Wow, 12 hours to install... On a Dell mini 9 with a small 8GB SSD, the update is more like 2 hours. Maximum. So something is clearly wrong.

I didn't find any hardware problem with this model on internet. Maybe you could check the logs and try to see what's wrong. But that can take quite some time.

Just check this one maybe: open a terminal, press "dmesg" and see if you can find anything interesting there (I know, it's not always easy to understand, but maybe you will notice something).

Other idea: try a USB stick with a live system. If it's working much faster, you know you don't have any hardware problem but a software one. Then you can consider backuping the files and doing a clean install.

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#2

Could be using a dialup connection, so a download of that size WILL take a while.

Can you run:

dmesg > ~/dmesg123.txt; gedit ~/dmesg123.txt; rm ~/dmesg123.txt

What is output?

Revision history for this message
Andres Muniz (andresmp) said : 		#3

@actionparsnip what took 12hrs was not the download but the instalation part. Download was done in less than 1hr.

@ François Tissandier I'll try that tonight. I would rather not do a clean instal. Just our of pride (told my windows friends that that was never necesary under linux, should shut my big mouth next time). Will try your USB live system: good idea.

I'll post the dmesg output later today.

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#4

Yikes thats pretty crazy. I'd also test your RAM is healthy using memtest in the grub menu at bootup.

Revision history for this message
François Tissandier (baloo) said : 		#5

Andres, I see what you mean but you should make a difference between:

-the system is stable, it's as fast 2 years after install as on the first day. This is more or less true (updates will always make things change), but compared to Windows XP for instance, the difference is striking, unless you spend a lot of time cleaning your XP.

-version upgrades are not trivial updates. We talk about major changes every 6 months. It's almost comparable to upgrade your XP to Vista then to Seven. Even if it's working better and better, I still think a clean install every 2 or 3 versions is welcome.

But in any case, a system upgrade shouldn't make the system that slow, it's really weird. And I'm quite confident that it can be fixed. To break the system, you need to damage your harddrive or hit very hard on the kernel. It's just that sometimes the time you spend on understanding the problem is not worth it, it's simpler to reinstall. You are just unlucky to be in this situation I think :) 99% of problems can be easily fixed with the right people to help.

Revision history for this message
Andres Muniz (andresmp) said : 		#6

Great, thanks for input.

Startup takes 2 minutes 30 seconds. With the USB it takes 1minute 40 seconds.

I did the dmesg as suggested. I'll try to find out how to put the whole thing in a txt file and post it here but in the mean time I found this

[ 0.385315] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.385335] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.385688] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.385710] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.386054] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.386074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.386412] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.386435] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.386842] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.386862] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.387236] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.387257] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.387615] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.387635] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.387970] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.387991] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.388118] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.388492] intel_idle: MWAIT substates: 0x20220
[ 0.388500] intel_idle: v0.4 model 0x1C
[ 0.388506] intel_idle: lapic_timer_reliable_states 0x6

I'll also look up for memtest (I'm not dual booting so I don't know how to bring it up) will a bench mark test do? I think I saw something like that when I installed lubuntu some time ago.

Revision history for this message
Andres Muniz (andresmp) said : 		#7

Tried to attach a txt or use ubuntuone, but for some reason not working for any This is what I get from dmesg please tell me if you make something out of it:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 (Ubuntu 2.6.35-22.35-generic 2.6.35.4)
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
[ 0.000000] BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
[ 0.000000] BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
[ 0.000000] BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
[ 0.000000] BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask 0FFFE0000 write-protect
[ 0.000000] 1 base 0FFFC0000 mask 0FFFE0000 uncachable
[ 0.000000] 2 base 000000000 mask 0E0000000 write-back
[ 0.000000] 3 base 020000000 mask 0E0000000 write-back
[ 0.000000] 4 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 5 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 6 base 03F500000 mask 0FFF00000 uncachable
[ 0.000000] 7 base 000000000 mask 0FFFE0000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f376000 (usable)
[ 0.000000] modified: 000000003f376000 - 000000003f3bf000 (reserved)
[ 0.000000] modified: 000000003f3bf000 - 000000003f46d000 (usable)
[ 0.000000] modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
[ 0.000000] modified: 000000003f4bf000 - 000000003f4f0000 (usable)
[ 0.000000] modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
[ 0.000000] modified: 000000003f4ff000 - 000000003f500000 (usable)
[ 0.000000] modified: 000000003f500000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 9a5000-a86000
[ 0.000000] RAMDISK: 2ec96000 - 2f6d9000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 3f4fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 3f4fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 3f4f2000 05DE6 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 3f488000 00040
[ 0.000000] ACPI: SSDT 3f4fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: HPET 3f4fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 3f4fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 3f4f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 3f4f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 3f4f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f500
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f376
[ 0.000000] 0: 0x0003f3bf -> 0x0003f46d
[ 0.000000] 0: 0x0003f4bf -> 0x0003f4f0
[ 0.000000] 0: 0x0003f4ff -> 0x0003f500
[ 0.000000] On node 0 totalpages: 259046
[ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1001020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 251 pages used for memmap
[ 0.000000] HighMem zone: 31581 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [15000 - 157ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c17f8000 s36416 r0 d20928 u65536
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257019
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=8a590bde-7aaa-423c-bea7-4bce6bdcdccd ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5186540 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (53 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
[ 0.000000] #3 [002ec96000 - 002f6d9000] RAMDISK
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #5 [00009a1000 - 00009a4244] BRK
[ 0.000000] #6 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #7 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #8 [00009a5000 - 0000a80000] PGTABLE
[ 0.000000] #9 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #10 [0001001000 - 00017f1000] BOOTMEM
[ 0.000000] #11 [00017f1000 - 00017f1004] BOOTMEM
[ 0.000000] #12 [00017f1040 - 00017f1100] BOOTMEM
[ 0.000000] #13 [00017f1100 - 00017f1154] BOOTMEM
[ 0.000000] #14 [00017f1180 - 00017f4180] BOOTMEM
[ 0.000000] #15 [00017f4180 - 00017f418c] BOOTMEM
[ 0.000000] #16 [00017f41c0 - 00017f47c0] BOOTMEM
[ 0.000000] #17 [00017f47c0 - 00017f47e5] BOOTMEM
[ 0.000000] #18 [00017f4800 - 00017f4827] BOOTMEM
[ 0.000000] #19 [00017f4840 - 00017f4a70] BOOTMEM
[ 0.000000] #20 [00017f4a80 - 00017f4ac0] BOOTMEM
[ 0.000000] #21 [00017f4ac0 - 00017f4b00] BOOTMEM
[ 0.000000] #22 [00017f4b00 - 00017f4b40] BOOTMEM
[ 0.000000] #23 [00017f4b40 - 00017f4b80] BOOTMEM
[ 0.000000] #24 [00017f4b80 - 00017f4bc0] BOOTMEM
[ 0.000000] #25 [00017f4bc0 - 00017f4c00] BOOTMEM
[ 0.000000] #26 [00017f4c00 - 00017f4c40] BOOTMEM
[ 0.000000] #27 [00017f4c40 - 00017f4c80] BOOTMEM
[ 0.000000] #28 [00017f4c80 - 00017f4cc0] BOOTMEM
[ 0.000000] #29 [00017f4cc0 - 00017f4d00] BOOTMEM
[ 0.000000] #30 [00017f4d00 - 00017f4d40] BOOTMEM
[ 0.000000] #31 [00017f4d40 - 00017f4d80] BOOTMEM
[ 0.000000] #32 [00017f4d80 - 00017f4dc0] BOOTMEM
[ 0.000000] #33 [00017f4dc0 - 00017f4e00] BOOTMEM
[ 0.000000] #34 [00017f4e00 - 00017f4e40] BOOTMEM
[ 0.000000] #35 [00017f4e40 - 00017f4e80] BOOTMEM
[ 0.000000] #36 [00017f4e80 - 00017f4ec0] BOOTMEM
[ 0.000000] #37 [00017f4ec0 - 00017f4ed0] BOOTMEM
[ 0.000000] #38 [00017f4f00 - 00017f4f10] BOOTMEM
[ 0.000000] #39 [00017f4f40 - 00017f4faa] BOOTMEM
[ 0.000000] #40 [00017f4fc0 - 00017f502a] BOOTMEM
[ 0.000000] #41 [00017f8000 - 0001806000] BOOTMEM
[ 0.000000] #42 [0001808000 - 0001816000] BOOTMEM
[ 0.000000] #43 [00017f7040 - 00017f7044] BOOTMEM
[ 0.000000] #44 [00017f7080 - 00017f7084] BOOTMEM
[ 0.000000] #45 [00017f70c0 - 00017f70c8] BOOTMEM
[ 0.000000] #46 [00017f7100 - 00017f7108] BOOTMEM
[ 0.000000] #47 [00017f7140 - 00017f71c0] BOOTMEM
[ 0.000000] #48 [00017f71c0 - 00017f71ec] BOOTMEM
[ 0.000000] #49 [0001816000 - 000181a000] BOOTMEM
[ 0.000000] #50 [000181a000 - 000189a000] BOOTMEM
[ 0.000000] #51 [000189a000 - 00018da000] BOOTMEM
[ 0.000000] #52 [00018da000 - 0001dcc3ec] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
[ 0.000000] Memory: 1001804k/1037312k available (4928k kernel code, 34380k reserved, 2336k data, 684k init, 127328k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
[ 0.000000] .data : 0xc05d030e - 0xc0818668 (2336 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d030e (4928 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.081 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.16 BogoMIPS (lpj=6384324)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004065] Security Framework initialized
[ 0.004103] AppArmor: AppArmor initialized
[ 0.004108] Yama: becoming mindful.
[ 0.004233] Mount-cache hash table entries: 512
[ 0.004490] Initializing cgroup subsys ns
[ 0.004500] Initializing cgroup subsys cpuacct
[ 0.004511] Initializing cgroup subsys memory
[ 0.004529] Initializing cgroup subsys devices
[ 0.004536] Initializing cgroup subsys freezer
[ 0.004542] Initializing cgroup subsys net_cls
[ 0.004590] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004602] CPU: Physical Processor ID: 0
[ 0.004607] CPU: Processor Core ID: 0
[ 0.004613] mce: CPU supports 5 MCE banks
[ 0.004629] CPU0: Thermal monitoring enabled (TM1)
[ 0.004638] using mwait in idle threads.
[ 0.004651] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.004672] ... version: 3
[ 0.004676] ... bit width: 40
[ 0.004681] ... generic registers: 2
[ 0.004686] ... value mask: 000000ffffffffff
[ 0.004692] ... max period: 000000007fffffff
[ 0.004697] ... fixed-purpose events: 3
[ 0.004702] ... event mask: 0000000700000003
[ 0.011097] ACPI: Core revision 20100428
[ 0.028020] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028032] ftrace: allocating 21758 entries in 43 pages
[ 0.032107] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073158] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.076000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.164034] Brought up 2 CPUs
[ 0.164044] Total of 2 processors activated (6384.09 BogoMIPS).
[ 0.164432] devtmpfs: initialized
[ 0.166508] regulator: core version 0.5
[ 0.168057] Time: 17:15:51 Date: 10/30/10
[ 0.168144] NET: Registered protocol family 16
[ 0.168241] Trying to unpack rootfs image as initramfs...
[ 0.168603] EISA bus registered
[ 0.168630] ACPI: bus type pci registered
[ 0.168835] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.168847] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.168854] PCI: Using MMCONFIG for extended config space
[ 0.168860] PCI: Using configuration type 1 for base access
[ 0.173283] bio: create slab <bio-0> at 0
[ 0.177681] ACPI: EC: Look up EC in DSDT
[ 0.181833] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.187382] ACPI: BIOS _OSI(Linux) query ignored
[ 0.187671] ACPI: BIOS _OSI(Linux) query ignored
[ 0.189854] ACPI: SSDT 3f380c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.191026] ACPI: Dynamic OEM Table Load:
[ 0.191038] ACPI: SSDT (null) 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.191556] ACPI: SSDT 3f37fe10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.192698] ACPI: Dynamic OEM Table Load:
[ 0.192711] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.193880] ACPI: SSDT 3f380f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.195022] ACPI: Dynamic OEM Table Load:
[ 0.195034] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.195461] ACPI: SSDT 3f37ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.196611] ACPI: Dynamic OEM Table Load:
[ 0.196623] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.205752] ACPI: Interpreter enabled
[ 0.205769] ACPI: (supports S0 S3 S4 S5)
[ 0.205845] ACPI: Using IOAPIC for interrupt routing
[ 0.222077] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.222732] ACPI: No dock devices found.
[ 0.222745] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.224617] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.224638] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.224662] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.224734] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.227832] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.227844] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.227855] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.227867] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.228025] pci 0000:00:02.0: reg 10: [mem 0x58480000-0x584fffff]
[ 0.228038] pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7]
[ 0.228050] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
[ 0.228062] pci 0000:00:02.0: reg 1c: [mem 0x58500000-0x5853ffff]
[ 0.228141] pci 0000:00:02.1: reg 10: [mem 0x58400000-0x5847ffff]
[ 0.228307] pci 0000:00:1b.0: reg 10: [mem 0x58540000-0x58543fff 64bit]
[ 0.228401] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.228415] pci 0000:00:1b.0: PME# disabled
[ 0.228560] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.228573] pci 0000:00:1c.0: PME# disabled
[ 0.228715] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.228726] pci 0000:00:1c.1: PME# disabled
[ 0.228867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.228878] pci 0000:00:1c.2: PME# disabled
[ 0.229019] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.229030] pci 0000:00:1c.3: PME# disabled
[ 0.229124] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
[ 0.229218] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.229321] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
[ 0.229418] pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f]
[ 0.229509] pci 0000:00:1d.7: reg 10: [mem 0x58544400-0x585447ff]
[ 0.229594] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.229606] pci 0000:00:1d.7: PME# disabled
[ 0.229836] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.229849] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.229867] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.229960] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.229978] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.229995] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.230012] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.230028] pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af]
[ 0.230085] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.230098] pci 0000:00:1f.2: PME# disabled
[ 0.230187] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
[ 0.230319] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.230331] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.230344] pci 0000:00:1c.0: bridge window [mem 0x57300000-0x583fffff]
[ 0.230360] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.230572] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.230664] pci 0000:02:00.0: reg 18: [mem 0x51010000-0x51010fff 64bit pref]
[ 0.230747] pci 0000:02:00.0: reg 20: [mem 0x51000000-0x5100ffff 64bit pref]
[ 0.230823] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.231052] pci 0000:02:00.0: supports D1 D2
[ 0.231061] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.231084] pci 0000:02:00.0: PME# disabled
[ 0.231357] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.231370] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.231382] pci 0000:00:1c.1: bridge window [mem 0x56300000-0x572fffff]
[ 0.231398] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x520fffff 64bit pref]
[ 0.231614] pci 0000:03:00.0: reg 10: [mem 0x55200000-0x5520ffff 64bit]
[ 0.231939] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.231980] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.232020] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.232032] pci 0000:00:1c.2: bridge window [mem 0x55200000-0x562fffff]
[ 0.232049] pci 0000:00:1c.2: bridge window [mem 0x52100000-0x530fffff 64bit pref]
[ 0.232204] pci 0000:04:00.0: reg 10: [mem 0x54100300-0x541003ff]
[ 0.232297] pci 0000:04:00.0: reg 30: [mem 0xffff8000-0xffffffff pref]
[ 0.232481] pci 0000:04:00.2: reg 10: [mem 0x54100200-0x541002ff]
[ 0.232747] pci 0000:04:00.3: reg 10: [mem 0x54100100-0x541001ff]
[ 0.233007] pci 0000:04:00.4: reg 10: [mem 0x54100000-0x541000ff]
[ 0.240124] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.240141] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.240154] pci 0000:00:1c.3: bridge window [mem 0x54100000-0x551fffff]
[ 0.240172] pci 0000:00:1c.3: bridge window [mem 0x53100000-0x540fffff 64bit pref]
[ 0.240304] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.240318] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.240330] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.240347] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.240357] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240367] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240376] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240385] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.240436] pci_bus 0000:00: on NUMA node 0
[ 0.240461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.241038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.241492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.241820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.242076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.242328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.242980] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.243001] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.257563] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.257888] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.258225] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.258543] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.258861] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.259220] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.259542] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.259862] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.260085] HEST: Table is not found!
[ 0.260337] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260376] vgaarb: loaded
[ 0.260961] SCSI subsystem initialized
[ 0.261230] libata version 3.00 loaded.
[ 0.261437] usbcore: registered new interface driver usbfs
[ 0.261488] usbcore: registered new interface driver hub
[ 0.261583] usbcore: registered new device driver usb
[ 0.263156] ACPI: WMI: Mapper loaded
[ 0.263164] PCI: Using ACPI for IRQ routing
[ 0.263174] PCI: pci_cache_line_size set to 64 bytes
[ 0.263381] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.263390] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.263399] reserve RAM buffer: 000000003f376000 - 000000003fffffff
[ 0.263410] reserve RAM buffer: 000000003f46d000 - 000000003fffffff
[ 0.263419] reserve RAM buffer: 000000003f4f0000 - 000000003fffffff
[ 0.263428] reserve RAM buffer: 000000003f500000 - 000000003fffffff
[ 0.263742] NetLabel: Initializing
[ 0.263749] NetLabel: domain hash size = 128
[ 0.263754] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.263793] NetLabel: unlabeled traffic allowed by default
[ 0.263921] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.263939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.263955] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.268064] Switching to clocksource tsc
[ 0.297890] AppArmor: AppArmor Filesystem Enabled
[ 0.297933] pnp: PnP ACPI init
[ 0.297983] ACPI: bus type pnp registered
[ 0.300885] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.302846] pnp: PnP ACPI: found 9 devices
[ 0.302855] ACPI: ACPI bus type pnp unregistered
[ 0.302865] PnPBIOS: Disabled by ACPI PNP
[ 0.302937] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.302951] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.302963] system 00:01: [io 0x0610] has been reserved
[ 0.302974] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.302985] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.302996] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.303010] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.303021] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.303031] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.303042] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.303052] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.303063] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.303074] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.343632] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.343651] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
[ 0.343736] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.343747] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.343761] pci 0000:00:1c.0: bridge window [mem 0x57300000-0x583fffff]
[ 0.343775] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.343800] pci 0000:02:00.0: BAR 6: assigned [mem 0x51020000-0x5103ffff pref]
[ 0.343810] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.343821] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.343837] pci 0000:00:1c.1: bridge window [mem 0x56300000-0x572fffff]
[ 0.343850] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x520fffff 64bit pref]
[ 0.343866] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.343876] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.343889] pci 0000:00:1c.2: bridge window [mem 0x55200000-0x562fffff]
[ 0.343901] pci 0000:00:1c.2: bridge window [mem 0x52100000-0x530fffff 64bit pref]
[ 0.343921] pci 0000:04:00.0: BAR 6: assigned [mem 0x53100000-0x53107fff pref]
[ 0.343930] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.343939] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.343953] pci 0000:00:1c.3: bridge window [mem 0x54100000-0x551fffff]
[ 0.343965] pci 0000:00:1c.3: bridge window [mem 0x53100000-0x540fffff 64bit pref]
[ 0.343981] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.343987] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.343999] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.344009] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.344046] alloc irq_desc for 16 on node -1
[ 0.344053] alloc kstat_irqs on node -1
[ 0.344072] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.344085] pci 0000:00:1c.0: setting latency timer to 64
[ 0.344107] alloc irq_desc for 17 on node -1
[ 0.344113] alloc kstat_irqs on node -1
[ 0.344126] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.344138] pci 0000:00:1c.1: setting latency timer to 64
[ 0.344159] alloc irq_desc for 18 on node -1
[ 0.344165] alloc kstat_irqs on node -1
[ 0.344177] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.344188] pci 0000:00:1c.2: setting latency timer to 64
[ 0.344209] alloc irq_desc for 19 on node -1
[ 0.344215] alloc kstat_irqs on node -1
[ 0.344227] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.344239] pci 0000:00:1c.3: setting latency timer to 64
[ 0.344257] pci 0000:00:1e.0: setting latency timer to 64
[ 0.344269] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.344278] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.344286] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.344295] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[ 0.344304] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.344312] pci_bus 0000:01: resource 1 [mem 0x57300000-0x583fffff]
[ 0.344321] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.344331] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.344339] pci_bus 0000:02: resource 1 [mem 0x56300000-0x572fffff]
[ 0.344348] pci_bus 0000:02: resource 2 [mem 0x51000000-0x520fffff 64bit pref]
[ 0.344357] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.344365] pci_bus 0000:03: resource 1 [mem 0x55200000-0x562fffff]
[ 0.344375] pci_bus 0000:03: resource 2 [mem 0x52100000-0x530fffff 64bit pref]
[ 0.344384] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.344392] pci_bus 0000:04: resource 1 [mem 0x54100000-0x551fffff]
[ 0.344401] pci_bus 0000:04: resource 2 [mem 0x53100000-0x540fffff 64bit pref]
[ 0.344411] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.344419] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.344427] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.344436] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[ 0.344541] NET: Registered protocol family 2
[ 0.344735] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.345618] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.346796] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.347425] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.347437] TCP reno registered
[ 0.347452] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.347482] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.347769] NET: Registered protocol family 1
[ 0.347821] pci 0000:00:02.0: Boot video device
[ 0.348194] PCI: CLS 0 bytes, default 64
[ 0.348278] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.348287] Simple Boot Flag at 0x44 set to 0x1
[ 0.348874] cpufreq-nforce2: No nForce2 chipset.
[ 0.348994] Scanning for low memory corruption every 60 seconds
[ 0.349468] audit: initializing netlink socket (disabled)
[ 0.349499] type=2000 audit(1288458950.344:1): initialized
[ 0.373715] highmem bounce pool size: 64 pages
[ 0.373735] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.379307] VFS: Disk quotas dquot_6.5.2
[ 0.379537] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.381747] fuse init (API version 7.14)
[ 0.382100] msgmni has been set to 1707
[ 0.383098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.383110] io scheduler noop registered
[ 0.383118] io scheduler deadline registered
[ 0.383182] io scheduler cfq registered (default)
[ 0.383530] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.383602] alloc irq_desc for 40 on node -1
[ 0.383609] alloc kstat_irqs on node -1
[ 0.383634] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.383899] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.383964] alloc irq_desc for 41 on node -1
[ 0.383970] alloc kstat_irqs on node -1
[ 0.383989] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.384231] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.384295] alloc irq_desc for 42 on node -1
[ 0.384301] alloc kstat_irqs on node -1
[ 0.384319] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.384553] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.384624] alloc irq_desc for 43 on node -1
[ 0.384632] alloc kstat_irqs on node -1
[ 0.384653] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.385014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.385315] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.385335] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.385688] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.385710] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.386054] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.386074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.386412] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.386435] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.386842] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.386862] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.387236] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.387257] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.387615] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.387635] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.387970] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.387991] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
[ 0.388118] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.388492] intel_idle: MWAIT substates: 0x20220
[ 0.388500] intel_idle: v0.4 model 0x1C
[ 0.388506] intel_idle: lapic_timer_reliable_states 0x6
[ 0.388528] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.388947] Switching to clocksource hpet
[ 0.389541] ACPI: AC Adapter [ACAD] (off-line)
[ 0.389826] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.389842] ACPI: Power Button [PWRB]
[ 0.389993] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.390389] ACPI: Lid Switch [LID0]
[ 0.390582] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.390596] ACPI: Sleep Button [SLPB]
[ 0.390789] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.390801] ACPI: Power Button [PWRF]
[ 0.391725] ACPI: acpi_idle yielding to intel_idle
[ 0.400655] ERST: Table is not found!
[ 0.401488] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.406508] brd: module loaded
[ 0.408581] loop: module loaded
[ 0.409261] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.409313] isapnp: Scanning for PnP cards...
[ 0.458803] ata_piix 0000:00:1f.2: version 2.13
[ 0.458852] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.458867] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.458966] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.502719] scsi0 : ata_piix
[ 0.546630] scsi1 : ata_piix
[ 0.549763] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 0.549775] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 0.551265] Fixed MDIO Bus: probed
[ 0.551407] PPP generic driver version 2.4.2
[ 0.551576] tun: Universal TUN/TAP device driver, 1.6
[ 0.551583] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.551908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.551979] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.552029] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.552040] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.552186] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.552240] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.552262] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.556162] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.556217] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
[ 0.603845] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.604300] hub 1-0:1.0: USB hub found
[ 0.604318] hub 1-0:1.0: 8 ports detected
[ 0.604581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.604642] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.604735] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.604756] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.604766] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.604929] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.604984] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 0.605463] hub 2-0:1.0: USB hub found
[ 0.605484] hub 2-0:1.0: 2 ports detected
[ 0.605668] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.605688] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.605698] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.605840] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.605917] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[ 0.606332] hub 3-0:1.0: USB hub found
[ 0.606348] hub 3-0:1.0: 2 ports detected
[ 0.606539] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.606559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.606569] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.606699] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.606772] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[ 0.607208] hub 4-0:1.0: USB hub found
[ 0.607226] hub 4-0:1.0: 2 ports detected
[ 0.607400] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.607419] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.607429] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.607563] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.607637] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[ 0.608074] hub 5-0:1.0: USB hub found
[ 0.608090] hub 5-0:1.0: 2 ports detected
[ 0.608450] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.609664] i8042.c: Warning: Keylock active.
[ 0.661820] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.667644] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.667680] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.667692] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.667702] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.667712] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.668003] mice: PS/2 mouse device common for all mice
[ 0.668531] rtc_cmos 00:03: RTC can wake from S4
[ 0.668677] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.668739] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.669196] device-mapper: uevent: version 1.0.3
[ 0.692383] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.713367] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: <email address hidden>
[ 0.757170] device-mapper: multipath: version 1.1.1 loaded
[ 0.757183] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.768487] ata2.00: CFA: P-SSD1800, Ver2.Y0C, max UDMA/66
[ 0.768498] ata2.00: 31522176 sectors, multi 0: LBA
[ 0.776648] ata2.00: configured for UDMA/66
[ 0.780659] EISA: Probing bus 0 at eisa.0
[ 0.780670] EISA: Cannot allocate resource for mainboard
[ 0.780679] Cannot allocate resource for EISA slot 1
[ 0.780687] Cannot allocate resource for EISA slot 2
[ 0.780695] Cannot allocate resource for EISA slot 3
[ 0.780703] Cannot allocate resource for EISA slot 4
[ 0.780711] Cannot allocate resource for EISA slot 5
[ 0.780719] Cannot allocate resource for EISA slot 6
[ 0.780726] Cannot allocate resource for EISA slot 7
[ 0.780734] Cannot allocate resource for EISA slot 8
[ 0.780740] EISA: Detected 0 cards.
[ 0.801098] isapnp: No Plug & Play device found
[ 0.801665] cpuidle: using governor ladder
[ 0.801854] scsi 1:0:0:0: Direct-Access ATA P-SSD1800 Ver2 PQ: 0 ANSI: 5
[ 0.802131] cpuidle: using governor menu
[ 0.802386] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 0.802659] sd 1:0:0:0: [sda] 31522176 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 0.802894] sd 1:0:0:0: [sda] Write Protect is off
[ 0.802906] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.803003] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 0.803089] TCP cubic registered
[ 0.803588] NET: Registered protocol family 10
[ 0.804635] lo: Disabled Privacy Extensions
[ 0.805463] NET: Registered protocol family 17
[ 0.806746] Using IPI No-Shortcut mode
[ 0.807055] PM: Resume from disk failed.
[ 0.807097] registered taskstats version 1
[ 0.807882] Magic number: 14:801:290
[ 0.807940] tty tty23: hash matches
[ 0.808055] rtc_cmos 00:03: setting system clock to 2010-10-30 17:15:51 UTC (1288458951)
[ 0.808065] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.808071] EDD information not available.
[ 0.808683] sda: sda1 sda2 < sda5 >
[ 0.811808] sd 1:0:0:0: [sda] Attached SCSI disk
[ 0.844947] Freeing initrd memory: 10508k freed
[ 0.855707] Freeing unused kernel memory: 684k freed
[ 0.856541] Write protecting the kernel text: 4932k
[ 0.856621] Write protecting the kernel read-only data: 1976k
[ 0.898697] udev[80]: starting version 163
[ 0.917112] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.323168] sdhci: Secure Digital Host Controller Interface driver
[ 1.323180] sdhci: Copyright(c) Pierre Ossman
[ 1.346370] sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 1.346424] sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.346521] sdhci-pci 0000:04:00.0: setting latency timer to 64
[ 1.346650] Registered led device: mmc0::
[ 1.346784] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
[ 1.346820] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 1.346866] sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.346888] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[ 1.346908] sdhci-pci 0000:04:00.2: PCI INT A disabled
[ 1.375030] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.375135] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.375364] r8169 0000:02:00.0: setting latency timer to 64
[ 1.375558] alloc irq_desc for 44 on node -1
[ 1.375566] alloc kstat_irqs on node -1
[ 1.375633] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.377368] r8169 0000:02:00.0: eth0: RTL8102e at 0xf80b8000, 00:23:8b:5a:8a:0a, XID 04a00000 IRQ 44
[ 1.380710] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.845377] Adding 706824k swap on /dev/sda5. Priority:-1 extents:1 across:706824k
[ 7.951176] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 7.953109] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.048343] udev[339]: starting version 163
[ 8.156624] lp: driver loaded but no devices found
[ 8.582978] intel_rng: FWH not detected
[ 8.654838] leds_ss4200: no LED devices found
[ 8.746129] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 8.746298] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 8.747070] Linux agpgart interface v0.103
[ 8.816279] jmb38x_ms 0000:04:00.3: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.816298] jmb38x_ms 0000:04:00.3: setting latency timer to 64
[ 9.021769] Linux video capture interface: v2.00
[ 9.104211] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 9.104950] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 9.107877] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[ 9.114404] acerhdf: Acer Aspire One Fan driver, v.0.5.22
[ 9.114417] acerhdf: Fan control off, to enable do:
[ 9.114422] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
[ 9.119218] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
[ 9.143681] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6
[ 9.144200] usbcore: registered new interface driver uvcvideo
[ 9.144211] USB Video Class driver (v0.1.0)
[ 9.294810] type=1400 audit(1288458959.980:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=637 comm="apparmor_parser"
[ 9.295792] type=1400 audit(1288458959.980:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
[ 9.296778] type=1400 audit(1288458959.984:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[ 9.452809] cfg80211: Calling CRDA to update world regulatory domain
[ 9.600867] cfg80211: World regulatory domain updated:
[ 9.600879] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.600891] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.600901] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.600911] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.600920] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.600930] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.804853] r8169 0000:02:00.0: eth0: link down
[ 9.809097] [drm] Initialized drm 1.1.0 20060810
[ 9.817515] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.909362] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.909392] ath5k 0000:03:00.0: setting latency timer to 64
[ 9.909520] ath5k 0000:03:00.0: registered as 'phy0'
[ 10.058109] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0000
[ 10.115282] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 10.207453] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.207466] i915 0000:00:02.0: setting latency timer to 64
[ 10.319210] mtrr: no more MTRRs available
[ 10.319219] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 10.319360] [drm] set up 7M of stolen space
[ 10.430364] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.430938] [drm] initialized overlay support
[ 10.597245] ath: EEPROM regdomain: 0x65
[ 10.597252] ath: EEPROM indicates we should expect a direct regpair map
[ 10.597261] ath: Country alpha2 being used: 00
[ 10.597266] ath: Regpair used: 0x65
[ 10.619711] phy0: Selected rate control algorithm 'minstrel'
[ 10.621358] Registered led device: ath5k-phy0::rx
[ 10.621419] Registered led device: ath5k-phy0::tx
[ 10.621428] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 10.645797] type=1400 audit(1288458961.332:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=814 comm="apparmor_parser"
[ 10.646509] type=1400 audit(1288458961.332:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser"
[ 10.646930] type=1400 audit(1288458961.332:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser"
[ 10.658146] type=1400 audit(1288458961.344:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=815 comm="apparmor_parser"
[ 10.658582] type=1400 audit(1288458961.344:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=813 comm="apparmor_parser"
[ 10.671569] type=1400 audit(1288458961.356:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=815 comm="apparmor_parser"
[ 10.674889] type=1400 audit(1288458961.360:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=817 comm="apparmor_parser"
[ 10.737355] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.759979] Skipping EDID probe due to cached edid
[ 11.179740] Console: switching to colour frame buffer device 128x37
[ 11.186664] fb0: inteldrmfb frame buffer device
[ 11.186670] drm: registered panic notifier
[ 11.186682] Slow work thread pool: Starting up
[ 11.189772] Slow work thread pool: Ready
[ 11.189820] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.189938] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.190051] alloc irq_desc for 45 on node -1
[ 11.190060] alloc kstat_irqs on node -1
[ 11.190086] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 11.190153] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.602224] Skipping EDID probe due to cached edid
[ 11.695956] ppdev: user-space parallel port driver
[ 12.974661] wlan0: authenticate with 00:14:6c:7c:48:3c (try 1)
[ 12.976130] wlan0: authenticated
[ 12.976172] wlan0: associate with 00:14:6c:7c:48:3c (try 1)
[ 12.978344] wlan0: RX AssocResp from 00:14:6c:7c:48:3c (capab=0x411 status=0 aid=4)
[ 12.978358] wlan0: associated
[ 12.979882] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.344067] wlan0: no IPv6 routers present
[ 32.776329] Skipping EDID probe due to cached edid
[ 32.808273] Skipping EDID probe due to cached edid
[ 48.333517] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 51.536176] Skipping EDID probe due to cached edid
[ 51.576153] Skipping EDID probe due to cached edid
[ 51.609108] Skipping EDID probe due to cached edid
[ 71.001262] Skipping EDID probe due to cached edid
[ 71.032173] Skipping EDID probe due to cached edid
[ 85.039890] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#8

[ 48.333517] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 51.536176] Skipping EDID probe due to cached edid
[ 51.576153] Skipping EDID probe due to cached edid
[ 51.609108] Skipping EDID probe due to cached edid
[ 71.001262] Skipping EDID probe due to cached edid
[ 71.032173] Skipping EDID probe due to cached edid
[ 85.039890] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600

Is the interesting section where the time skips a lot. Notice how the sda1 partition gets mounted read only?I suggest you boot to liveCD or plug the device into another Linux system and fsck the partition. The fact you are using ext4 on a USB device does NOT help things as flash storage has a limited number of write cycles and Ext3 and Ext4 write to the journal a LOT, this massively reduces the life of the device and Ext2 is a far better choice. I personally suspect the device is failing due to wear and so the OS is mounting it read only.
The fsck will not wear out the disk more unless it needs to repair data as fsck only reads the data and flash devices have an unlimited amount of read cycles.

Revision history for this message
Andres Muniz (andresmp) said : 		#9

Hi,

I'll do what you suggest: I have a live USB witn 10.10 ready. I guess fsck is something I run on terminal? I'll have a look in the man pages to see how I can check the ssd.

That being said, I had read in linux format magazine (or understood from it) that USB device is not the same as SSD and SSD are not subject to wear because of something caled cycling recording or something: it doesn't save always in the same spot. I could have gotten this completely wrong...

To make sure we are on the same page: I'm using acer aspire one 110 that has a SSD. I only used the live usb to compare start up speeds.

OK, I'll give the fsck a go. Is this the same as memtest? doesn't sound like it. Wish me luck! After that's done I'll try to find out how to do the memtest.

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#10

http://en.wikipedia.org/wiki/Solid-state_drive
See disadvantages section

It's the same technology, just more capacity.

Yes fsck is a command line thing. You can run:

sudo fdisk -l

to see the avalable partitions. Make sure it is not mounted using:

mount

You can then run:

sudo fsck -a /dev/partitionname

replace partitionname with the actual partition name it has.

Revision history for this message
Andres Muniz (andresmp) said : 		#11

Ok read the wikipedia article. Wear leveling was what I meant.

I got a bit messed up with the comand line but I went to ubuntu's disk utility and did a file sistem check. I'm guessing it's the same thing, but using a gui for people like me...

It came out with my ATA pSSD 1800 "file system is clean" message.

I then went to the benchmark thing, and did a read test and access time: read average is 39.3 mb/s and access time is 0.8ms.

Did I miss anything?

I have a Swap of 724MB, is that too small?

Any more clues? Thanks for your time!

Revision history for this message
Best Tommy Trussell (tommy-trussell) said : 		#12

If the system boots slowly AND you are seeing the system hang occasionally while you are using it, you may be seeing Bug #574462, which seems to be due to a firmware issue in some SSDs. (When I say "hang" I mean you will be browsing the web or opening a file and everything seems to come to a stop for 5-20 seconds.) There is a workaround listed in that bug but it's not exactly user-friendly.

Revision history for this message
Andres Muniz (andresmp) said : 		#13

Hi. I can onLy guess this solves my problem. I moved some time ago to another incearingly distro that seems to use clutter for animations. Less of a computer but more of a mobile. Restraining yo use names. Thank you for your help!