Ubuntu
ubiquity package

cannot install the ubuntu 10.10

Asked by jacky

Hi,Mr:
     as expected, ubuntu10.10 release at 10.10.2010. i'm glad to download and try to install it on my desktop.
but when i run the dvd , the screen got blank or the last picture of last shutdown, cannot get the mouse except for the sound.
i suppose that it may be not compatible for my computer.
the hardware as below:
amd athlon 635 x4 processor
amd 880G motherboard with integrated graphic processor
nvdia GT240 graphic card with 512M ram
4G memory
500G seagate harddisk
samsung x16 dvd rom

is there anything wrong with my hardware configuration?

Oct 11 20:47:09 jacky-desktop kernel: [ 6.813225] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
Oct 11 20:47:09 jacky-desktop kernel: [ 6.813228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 11 20:47:09 jacky-desktop kernel: [ 6.817798] vga16fb: mapped to 0xc00a0000
Oct 11 20:47:09 jacky-desktop kernel: [ 6.817845] fb0: VGA16 VGA frame buffer device
Oct 11 20:47:09 jacky-desktop kernel: [ 6.822380] lp: driver loaded but no devices found
Oct 11 20:47:09 jacky-desktop kernel: [ 6.828419] Linux agpgart interface v0.103
Oct 11 20:47:09 jacky-desktop kernel: [ 6.848799] parport_pc 00:0a: reported by Plug and Play ACPI
Oct 11 20:47:09 jacky-desktop kernel: [ 6.848852] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Oct 11 20:47:09 jacky-desktop kernel: [ 6.859426] ppdev: user-space parallel port driver
Oct 11 20:47:09 jacky-desktop kernel: [ 6.944189] lp0: using parport0 (interrupt-driven).
Oct 11 20:47:09 jacky-desktop kernel: [ 7.103391] EXT4-fs (sda8): mounted filesystem with ordered data mode
Oct 11 20:47:09 jacky-desktop kernel: [ 7.105303] Console: switching to colour frame buffer device 80x30
Oct 11 20:47:09 jacky-desktop kernel: [ 7.183063] nvidia: module license 'NVIDIA' taints kernel.
Oct 11 20:47:09 jacky-desktop kernel: [ 7.183066] Disabling lock debugging due to kernel taint
Oct 11 20:47:09 jacky-desktop kernel: [ 7.641039] type=1505 audit(1286801229.272:5): operation="profile_load" pid=822 name="/usr/share/gdm/guest-session/Xsession"
Oct 11 20:47:09 jacky-desktop kernel: [ 7.642192] type=1505 audit(1286801229.272:6): operation="profile_replace" pid=823 name="/sbin/dhclient3"
Oct 11 20:47:09 jacky-desktop kernel: [ 7.642387] type=1505 audit(1286801229.272:7): operation="profile_replace" pid=823 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Oct 11 20:47:09 jacky-desktop kernel: [ 7.642496] type=1505 audit(1286801229.272:8): operation="profile_replace" pid=823 name="/usr/lib/connman/scripts/dhclient-script"
Oct 11 20:47:09 jacky-desktop kernel: [ 7.644542] type=1505 audit(1286801229.276:9): operation="profile_load" pid=824 name="/usr/bin/evince"
Oct 11 20:47:09 jacky-desktop kernel: [ 7.647032] type=1505 audit(1286801229.276:10): operation="profile_load" pid=824 name="/usr/bin/evince-previewer"
Oct 11 20:47:09 jacky-desktop kernel: [ 7.648561] type=1505 audit(1286801229.280:11): operation="profile_load" pid=824 name="/usr/bin/evince-thumbnailer"
Oct 11 20:47:09 jacky-desktop kernel: [ 7.720372] r8169: eth0: link up
Oct 11 20:47:09 jacky-desktop kernel: [ 7.720372] r8169: eth0: link up
Oct 11 20:47:09 jacky-desktop kernel: [ 7.934653] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 11 20:47:09 jacky-desktop kernel: [ 8.020973] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 11 20:47:09 jacky-desktop kernel: [ 8.020976] hda_intel: Disable MSI for Nvidia chipset
Oct 11 20:47:10 jacky-desktop kernel: [ 8.820406] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 11 20:47:10 jacky-desktop kernel: [ 8.820419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Oct 11 20:47:10 jacky-desktop kernel: [ 8.820546] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
Oct 11 20:47:12 jacky-desktop kernel: [ 11.236416] r8169: WARNING! Changing of MTU on this NIC may lead to frame reception errors!
Oct 12 20:47:46 jacky-desktop kernel: imklog 4.2.0, log source = /proc/kmsg started.
Oct 12 20:47:46 jacky-desktop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="798" x-info="http://www.rsyslog.com"] (re)start
Oct 12 20:47:46 jacky-desktop rsyslogd: rsyslogd's groupid changed to 103
Oct 12 20:47:46 jacky-desktop rsyslogd: rsyslogd's userid changed to 101
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Linux version 2.6.32-24-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 15:30:27 UTC 2010 (Ubuntu 2.6.32-24.43-generic-pae 2.6.32.15+drm33.5)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] KERNEL supported cpus:
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Intel GenuineIntel
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] AMD AuthenticAMD
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] NSC Geode by NSC
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Cyrix CyrixInstead
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Centaur CentaurHauls
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Transmeta GenuineTMx86
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Transmeta TransmetaCPU
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] UMC UMC UMC UMC
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfdf0000 (usable)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 00000000bfdf0000 - 00000000bfdf3000 (ACPI NVS)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 00000000bfdf3000 - 00000000bfe00000 (ACPI data)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000bff00000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] DMI 2.4 present.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Scanning 1 areas for low memory corruption
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified physical RAM map:
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 0000000000100000 - 00000000bfdf0000 (usable)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 00000000bfdf0000 - 00000000bfdf3000 (ACPI NVS)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 00000000bfdf3000 - 00000000bfe00000 (ACPI data)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 00000000bfe00000 - 00000000bff00000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] NX (Execute Disable) protection: active
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] RAMDISK: 37864000 - 37fef2a2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Allocated new RAMDISK: 0093f000 - 010ca2a2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Move RAMDISK from 0000000037864000 - 0000000037fef2a1 to 0093f000 - 010ca2a1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: RSDP 000f7070 00014 (v00 GBT )
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: RSDT bfdf3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: FACP bfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: DSDT bfdf30c0 07619 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: FACS bfdf0000 00040
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: SSDT bfdfa7c0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: HPET bfdfb080 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: MCFG bfdfb0c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: TAMG bfdfb100 0039A (v01 GBT GBT B0 5455312E BG?? 53450101)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: APIC bfdfa700 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] 4230MB HIGHMEM available.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] 889MB LOWMEM available.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] mapped low ram: 0 - 379fe000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] low ram: 0 - 379fe000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] node 0 low ram: 00000000 - 379fe000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] node 0 bootmap 00009000 - 0000ff40
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #3 [0000100000 - 00009367f8] TEXT DATA BSS ==> [0000100000 - 00009367f8]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #5 [0000937000 - 000093e0fe] BRK ==> [0000937000 - 000093e0fe]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #7 [000093f000 - 00010ca2a2] NEW RAMDISK ==> [000093f000 - 00010ca2a2]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] found SMP MP-table at [c00f56b0] f56b0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Zone PFN ranges:
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Normal 0x00001000 -> 0x000379fe
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] HighMem 0x000379fe -> 0x00140000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Movable zone start PFN for each node
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] early_node_map[4] active PFN ranges
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] 0: 0x00000006 -> 0x0000009f
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] 0: 0x00000100 -> 0x000bfdf0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Using APIC driver default
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3a00000 s39480 r0 d21960 u262144
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] pcpu-alloc: s39480 r0 d21960 u262144 alloc=1*2097152
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037706
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic-pae root=UUID=ae7e87b0-2b38-4a9b-a7fd-345da5ea8b5e ro single
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Initializing CPU#0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] allocated 26214400 bytes of page_cgroup
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Memory: 4106352k/5242880k available (4832k kernel code, 84108k reserved, 2221k data, 676k init, 3280840k highmem)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] virtual kernel memory layout:
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] .init : 0xc07e4000 - 0xc088d000 ( 676 kB)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] .data : 0xc05b82fb - 0xc07e3828 (2221 kB)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] .text : 0xc0100000 - 0xc05b82fb (4832 kB)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Hierarchical RCU implementation.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:472
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Console: colour VGA+ 80x25
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] console [tty0] enabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Fast TSC calibration using PIT
Oct 12 20:47:46 jacky-desktop kernel: [ 0.000000] Detected 2913.518 MHz processor.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5827.03 BogoMIPS (lpj=11654072)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004117] Security Framework initialized
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004176] AppArmor: AppArmor initialized
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004231] Mount-cache hash table entries: 512
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004354] Initializing cgroup subsys ns
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004406] Initializing cgroup subsys cpuacct
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004458] Initializing cgroup subsys memory
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004512] Initializing cgroup subsys devices
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004563] Initializing cgroup subsys freezer
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004614] Initializing cgroup subsys net_cls
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004674] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004728] CPU: L2 Cache: 512K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004779] CPU: Physical Processor ID: 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004829] CPU: Processor Core ID: 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004880] mce: CPU supports 6 MCE banks
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004936] using C1E aware idle routine
Oct 12 20:47:46 jacky-desktop kernel: [ 0.004990] Performance Events: AMD PMU driver.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.005078] ... version: 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.005128] ... bit width: 48
Oct 12 20:47:46 jacky-desktop kernel: [ 0.005178] ... generic registers: 4
Oct 12 20:47:46 jacky-desktop kernel: [ 0.005229] ... value mask: 0000ffffffffffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.005281] ... max period: 00007fffffffffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008002] ... fixed-purpose events: 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008053] ... event mask: 000000000000000f
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008105] Checking 'hlt' instruction... OK.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.025616] ACPI: Core revision 20090903
Oct 12 20:47:46 jacky-desktop kernel: [ 0.036016] ftrace: converting mcount calls to 0f 1f 44 00 00
Oct 12 20:47:46 jacky-desktop kernel: [ 0.036076] ftrace: allocating 22411 entries in 44 pages
Oct 12 20:47:46 jacky-desktop kernel: [ 0.040057] Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 12 20:47:46 jacky-desktop kernel: [ 0.040582] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.085085] CPU0: AMD Athlon(tm) II X4 635 Processor stepping 03
Oct 12 20:47:46 jacky-desktop kernel: [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] Initializing CPU#1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: Physical Processor ID: 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: Processor Core ID: 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.172044] CPU1: AMD Athlon(tm) II X4 635 Processor stepping 03
Oct 12 20:47:46 jacky-desktop kernel: [ 0.172422] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.176018] System has AMD C1E enabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.176082] Switch to broadcast mode on CPU1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.176151] Booting processor 2 APIC 0x2 ip 0x6000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] Initializing CPU#2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: Physical Processor ID: 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: Processor Core ID: 3
Oct 12 20:47:46 jacky-desktop kernel: [ 0.264096] CPU2: AMD Athlon(tm) II X4 635 Processor stepping 03
Oct 12 20:47:46 jacky-desktop kernel: [ 0.264482] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.268019] Switch to broadcast mode on CPU2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.268098] Booting processor 3 APIC 0x3 ip 0x6000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] Initializing CPU#3
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: Physical Processor ID: 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.008000] CPU: Processor Core ID: 2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.356098] CPU3: AMD Athlon(tm) II X4 635 Processor stepping 03
Oct 12 20:47:46 jacky-desktop kernel: [ 0.356491] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360019] Brought up 4 CPUs
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360019] Switch to broadcast mode on CPU3
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360129] Total of 4 processors activated (23306.16 BogoMIPS).
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] Switch to broadcast mode on CPU0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] devtmpfs: initialized
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] regulator: core version 0.5
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] Time: 20:47:39 Date: 10/12/10
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] NET: Registered protocol family 16
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] EISA bus registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] Trying to unpack rootfs image as initramfs...
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] ACPI: bus type pci registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] PCI: MCFG area at e0000000 reserved in E820
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360632] PCI: Using MMCONFIG for extended config space
Oct 12 20:47:46 jacky-desktop kernel: [ 0.360675] PCI: Using configuration type 1 for base access
Oct 12 20:47:46 jacky-desktop kernel: [ 0.361224] bio: create slab <bio-0> at 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.368790] ACPI: Interpreter enabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.368851] ACPI: (supports S0 S3 S4 S5)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.369063] ACPI: Using IOAPIC for interrupt routing
Oct 12 20:47:46 jacky-desktop kernel: [ 0.372604] ACPI Warning: Incorrect checksum in table [TAMG] - A3, should be A2 (20090903/tbutils-314)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.372820] ACPI: No dock devices found.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.372952] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373080] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373134] pci 0000:00:02.0: PME# disabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373219] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373273] pci 0000:00:0a.0: PME# disabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373411] pci 0000:00:11.0: set SATA to AHCI mode
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373665] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373720] pci 0000:00:12.2: PME# disabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.373960] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Oct 12 20:47:46 jacky-desktop kernel: [ 0.374015] pci 0000:00:13.2: PME# disabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.374290] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Oct 12 20:47:46 jacky-desktop kernel: [ 0.374345] pci 0000:00:14.2: PME# disabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.374852] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 12 20:47:46 jacky-desktop kernel: [ 0.374907] pci 0000:02:00.0: PME# disabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.375139] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
Oct 12 20:47:46 jacky-desktop kernel: [ 0.375195] pci 0000:03:0e.0: PME# disabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.375276] pci 0000:00:14.4: transparent bridge
Oct 12 20:47:46 jacky-desktop kernel: [ 0.392046] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.392578] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.393109] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.393639] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.394170] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.394699] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.395228] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.395758] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396275] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396340] vgaarb: loaded
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396459] SCSI subsystem initialized
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] usbcore: registered new interface driver usbfs
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] usbcore: registered new interface driver hub
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] usbcore: registered new device driver usb
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] ACPI: WMI: Mapper loaded
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] PCI: Using ACPI for IRQ routing
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] pci 0000:00:00.0: BAR 3: can't allocate resource
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] NetLabel: Initializing
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] NetLabel: domain hash size = 128
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] NetLabel: protocols = UNLABELED CIPSOv4
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396547] NetLabel: unlabeled traffic allowed by default
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396616] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.396851] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Oct 12 20:47:46 jacky-desktop kernel: [ 0.398927] Switching to clocksource tsc
Oct 12 20:47:46 jacky-desktop kernel: [ 0.401299] AppArmor: AppArmor Filesystem Enabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.401363] pnp: PnP ACPI init
Oct 12 20:47:46 jacky-desktop kernel: [ 0.401425] ACPI: bus type pnp registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.403669] pnp 00:0d: mem resource (0xcd800-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Oct 12 20:47:46 jacky-desktop kernel: [ 0.403736] pnp 00:0d: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Oct 12 20:47:46 jacky-desktop kernel: [ 0.403803] pnp 00:0d: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Oct 12 20:47:46 jacky-desktop kernel: [ 0.403870] pnp 00:0d: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Oct 12 20:47:46 jacky-desktop kernel: [ 0.403936] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404017] pnp 00:0d: mem resource (0x100000-0xbfdeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404146] pnp: PnP ACPI: found 14 devices
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404197] ACPI: ACPI bus type pnp unregistered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404249] PnPBIOS: Disabled by ACPI PNP
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404305] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404359] system 00:01: ioport range 0x220-0x225 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404412] system 00:01: ioport range 0x290-0x294 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404468] system 00:02: ioport range 0x4100-0x411f has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404521] system 00:02: ioport range 0x228-0x22f has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404575] system 00:02: ioport range 0x40b-0x40b has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404628] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404682] system 00:02: ioport range 0xc00-0xc01 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404735] system 00:02: ioport range 0xc14-0xc14 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404788] system 00:02: ioport range 0xc50-0xc52 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404842] system 00:02: ioport range 0xc6c-0xc6d has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404895] system 00:02: ioport range 0xc6f-0xc6f has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.404948] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405002] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405055] system 00:02: ioport range 0xcd4-0xcdf has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405109] system 00:02: ioport range 0x4000-0x40fe has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405163] system 00:02: ioport range 0x4210-0x4217 has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405216] system 00:02: ioport range 0xb00-0xb0f has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405269] system 00:02: ioport range 0xb10-0xb1f has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405323] system 00:02: ioport range 0xb20-0xb3f has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405380] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405436] system 00:0d: iomem range 0xbfdf0000-0xbfdfffff could not be reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405500] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405555] system 00:0d: iomem range 0xbfe00000-0xbfefffff has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405609] system 00:0d: iomem range 0xbff00000-0xbfffffff could not be reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405673] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405737] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.405791] system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440465] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440518] pci 0000:00:02.0: IO window: 0xe000-0xefff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440571] pci 0000:00:02.0: MEM window: 0xfb000000-0xfcffffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440625] pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440690] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440743] pci 0000:00:0a.0: IO window: 0xd000-0xdfff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440796] pci 0000:00:0a.0: MEM window: 0xfdc00000-0xfdcfffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440849] pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440914] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
Oct 12 20:47:46 jacky-desktop kernel: [ 0.440968] pci 0000:00:14.4: IO window: 0xc000-0xcfff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.441023] pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.441078] pci 0000:00:14.4: PREFETCH window: 0xfdd00000-0xfddfffff
Oct 12 20:47:46 jacky-desktop kernel: [ 0.441148] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 12 20:47:46 jacky-desktop kernel: [ 0.441208] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 12 20:47:46 jacky-desktop kernel: [ 0.441317] NET: Registered protocol family 2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.441433] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.441696] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.442135] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.442373] TCP: Hash tables configured (established 131072 bind 65536)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.442427] TCP reno registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.442550] NET: Registered protocol family 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.502862] Freeing initrd memory: 7724k freed
Oct 12 20:47:46 jacky-desktop kernel: [ 0.520250] cpufreq-nforce2: No nForce2 chipset.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.520318] Scanning for low memory corruption every 60 seconds
Oct 12 20:47:46 jacky-desktop kernel: [ 0.520441] audit: initializing netlink socket (disabled)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.520499] type=2000 audit(1286916459.519:1): initialized
Oct 12 20:47:46 jacky-desktop kernel: [ 0.528951] highmem bounce pool size: 64 pages
Oct 12 20:47:46 jacky-desktop kernel: [ 0.529005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 12 20:47:46 jacky-desktop kernel: [ 0.530001] VFS: Disk quotas dquot_6.5.2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.530088] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.530513] fuse init (API version 7.13)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.530613] msgmni has been set to 1630
Oct 12 20:47:46 jacky-desktop kernel: [ 0.530871] alg: No test for stdrng (krng)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.530981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531047] io scheduler noop registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531097] io scheduler anticipatory registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531148] io scheduler deadline registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531225] io scheduler cfq registered (default)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531652] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531717] ACPI: Power Button [PWRB]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531800] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.531863] ACPI: Power Button [PWRF]
Oct 12 20:47:46 jacky-desktop kernel: [ 0.532158] processor LNXCPU:00: registered as cooling_device0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.532243] processor LNXCPU:01: registered as cooling_device1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.532324] processor LNXCPU:02: registered as cooling_device2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.532406] processor LNXCPU:03: registered as cooling_device3
Oct 12 20:47:46 jacky-desktop kernel: [ 0.534028] isapnp: Scanning for PnP cards...
Oct 12 20:47:46 jacky-desktop kernel: [ 0.534820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 12 20:47:46 jacky-desktop kernel: [ 0.534972] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 12 20:47:46 jacky-desktop kernel: [ 0.535282] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 12 20:47:46 jacky-desktop kernel: [ 0.535979] brd: module loaded
Oct 12 20:47:46 jacky-desktop kernel: [ 0.536294] loop: module loaded
Oct 12 20:47:46 jacky-desktop kernel: [ 0.536401] input: Macintosh mouse button emulation as /devices/virtual/input/input2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.536582] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 12 20:47:46 jacky-desktop kernel: [ 0.536856] Fixed MDIO Bus: probed
Oct 12 20:47:46 jacky-desktop kernel: [ 0.536926] PPP generic driver version 2.4.2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.536995] tun: Universal TUN/TAP device driver, 1.6
Oct 12 20:47:46 jacky-desktop kernel: [ 0.537046] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
Oct 12 20:47:46 jacky-desktop kernel: [ 0.537146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 12 20:47:46 jacky-desktop kernel: [ 0.537218] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 12 20:47:46 jacky-desktop kernel: [ 0.537284] ehci_hcd 0000:00:12.2: EHCI Host Controller
Oct 12 20:47:46 jacky-desktop kernel: [ 0.537354] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.537441] ehci_hcd 0000:00:12.2: debug port 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.537516] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.547961] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548102] usb usb1: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548180] hub 1-0:1.0: USB hub found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548234] hub 1-0:1.0: 6 ports detected
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548342] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548407] ehci_hcd 0000:00:13.2: EHCI Host Controller
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548484] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548570] ehci_hcd 0000:00:13.2: debug port 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.548646] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.559961] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560097] usb usb2: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560165] hub 2-0:1.0: USB hub found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560222] hub 2-0:1.0: 6 ports detected
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560318] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560384] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560452] ohci_hcd 0000:00:12.0: OHCI Host Controller
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560525] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
Oct 12 20:47:46 jacky-desktop kernel: [ 0.560615] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.620013] usb usb3: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.620087] hub 3-0:1.0: USB hub found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.620144] hub 3-0:1.0: 3 ports detected
Oct 12 20:47:46 jacky-desktop kernel: [ 0.620234] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 12 20:47:46 jacky-desktop kernel: [ 0.620301] ohci_hcd 0000:00:12.1: OHCI Host Controller
Oct 12 20:47:46 jacky-desktop kernel: [ 0.620374] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
Oct 12 20:47:46 jacky-desktop kernel: [ 0.620453] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.680005] usb usb4: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.680078] hub 4-0:1.0: USB hub found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.680136] hub 4-0:1.0: 3 ports detected
Oct 12 20:47:46 jacky-desktop kernel: [ 0.680225] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 12 20:47:46 jacky-desktop kernel: [ 0.680292] ohci_hcd 0000:00:13.0: OHCI Host Controller
Oct 12 20:47:46 jacky-desktop kernel: [ 0.680365] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
Oct 12 20:47:46 jacky-desktop kernel: [ 0.680456] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.739999] usb usb5: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.740070] hub 5-0:1.0: USB hub found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.740128] hub 5-0:1.0: 3 ports detected
Oct 12 20:47:46 jacky-desktop kernel: [ 0.740216] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 12 20:47:46 jacky-desktop kernel: [ 0.740282] ohci_hcd 0000:00:13.1: OHCI Host Controller
Oct 12 20:47:46 jacky-desktop kernel: [ 0.740361] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
Oct 12 20:47:46 jacky-desktop kernel: [ 0.740439] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.799992] usb usb6: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.800066] hub 6-0:1.0: USB hub found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.800125] hub 6-0:1.0: 3 ports detected
Oct 12 20:47:46 jacky-desktop kernel: [ 0.800217] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 12 20:47:46 jacky-desktop kernel: [ 0.800287] ohci_hcd 0000:00:14.5: OHCI Host Controller
Oct 12 20:47:46 jacky-desktop kernel: [ 0.800362] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
Oct 12 20:47:46 jacky-desktop kernel: [ 0.800442] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
Oct 12 20:47:46 jacky-desktop kernel: [ 0.859988] usb usb7: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860058] hub 7-0:1.0: USB hub found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860118] hub 7-0:1.0: 2 ports detected
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860205] uhci_hcd: USB Universal Host Controller Interface driver
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860307] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860361] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860611] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860716] mice: PS/2 mouse device common for all mice
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860837] rtc_cmos 00:05: RTC can wake from S4
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860915] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.860997] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861111] device-mapper: uevent: version 1.0.3
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861251] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861413] device-mapper: multipath: version 1.1.0 loaded
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861466] device-mapper: multipath round-robin: version 1.0.0 loaded
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861609] EISA: Probing bus 0 at eisa.0
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861674] Cannot allocate resource for EISA slot 4
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861740] EISA: Detected 0 cards.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861929] cpuidle: using governor ladder
Oct 12 20:47:46 jacky-desktop kernel: [ 0.861980] cpuidle: using governor menu
Oct 12 20:47:46 jacky-desktop kernel: [ 0.862311] TCP cubic registered
Oct 12 20:47:46 jacky-desktop kernel: [ 0.862457] NET: Registered protocol family 10
Oct 12 20:47:46 jacky-desktop kernel: [ 0.862815] lo: Disabled Privacy Extensions
Oct 12 20:47:46 jacky-desktop kernel: [ 0.863084] NET: Registered protocol family 17
Oct 12 20:47:46 jacky-desktop kernel: [ 0.863173] powernow-k8: Found 1 AMD Athlon(tm) II X4 635 Processor processors (4 cpu cores) (version 2.20.00)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.863267] powernow-k8: 0 : pstate 0 (2900 MHz)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.863319] powernow-k8: 1 : pstate 1 (2200 MHz)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.863372] powernow-k8: 2 : pstate 2 (1700 MHz)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.863423] powernow-k8: 3 : pstate 3 (800 MHz)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.878938] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Oct 12 20:47:46 jacky-desktop kernel: [ 0.887837] isapnp: No Plug & Play device found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.888099] Using IPI No-Shortcut mode
Oct 12 20:47:46 jacky-desktop kernel: [ 0.888240] registered taskstats version 1
Oct 12 20:47:46 jacky-desktop kernel: [ 0.888560] Magic number: 14:284:801
Oct 12 20:47:46 jacky-desktop kernel: [ 0.888691] rtc_cmos 00:05: setting system clock to 2010-10-12 20:47:40 UTC (1286916460)
Oct 12 20:47:46 jacky-desktop kernel: [ 0.888756] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 12 20:47:46 jacky-desktop kernel: [ 0.888809] EDD information not available.
Oct 12 20:47:46 jacky-desktop kernel: [ 0.888917] Freeing unused kernel memory: 676k freed
Oct 12 20:47:46 jacky-desktop kernel: [ 0.889195] Write protecting the kernel text: 4836k
Oct 12 20:47:46 jacky-desktop kernel: [ 0.889301] Write protecting the kernel read-only data: 1880k
Oct 12 20:47:46 jacky-desktop kernel: [ 0.903798] udev: starting version 151
Oct 12 20:47:46 jacky-desktop kernel: [ 0.927093] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 12 20:47:46 jacky-desktop kernel: [ 0.927165] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 12 20:47:46 jacky-desktop kernel: [ 0.927737] eth0: RTL8168d/8111d at 0xf8234000, 1c:6f:65:21:7c:94, XID 083000c0 IRQ 27
Oct 12 20:47:46 jacky-desktop kernel: [ 0.936203] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 12 20:47:46 jacky-desktop kernel: [ 0.936363] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Oct 12 20:47:46 jacky-desktop kernel: [ 0.936439] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
Oct 12 20:47:46 jacky-desktop kernel: [ 0.944498] scsi0 : ahci
Oct 12 20:47:46 jacky-desktop kernel: [ 0.951017] Floppy drive(s): fd0 is 1.44M
Oct 12 20:47:46 jacky-desktop kernel: [ 0.952039] scsi1 : ahci
Oct 12 20:47:46 jacky-desktop kernel: [ 0.954563] scsi2 : ahci
Oct 12 20:47:46 jacky-desktop kernel: [ 0.955444] scsi3 : ahci
Oct 12 20:47:46 jacky-desktop kernel: [ 0.955604] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
Oct 12 20:47:46 jacky-desktop kernel: [ 0.955672] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
Oct 12 20:47:46 jacky-desktop kernel: [ 0.955737] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
Oct 12 20:47:46 jacky-desktop kernel: [ 0.955804] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
Oct 12 20:47:46 jacky-desktop kernel: [ 0.956057] scsi4 : pata_atiixp
Oct 12 20:47:46 jacky-desktop kernel: [ 0.956219] ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 12 20:47:46 jacky-desktop kernel: [ 0.956282] scsi5 : pata_atiixp
Oct 12 20:47:46 jacky-desktop kernel: [ 0.957089] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
Oct 12 20:47:46 jacky-desktop kernel: [ 0.957146] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
Oct 12 20:47:46 jacky-desktop kernel: [ 0.975684] FDC 0 is a post-1991 82077
Oct 12 20:47:46 jacky-desktop kernel: [ 1.012613] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Oct 12 20:47:46 jacky-desktop kernel: [ 1.088076] usb 3-1: new low speed USB device using ohci_hcd and address 2
Oct 12 20:47:46 jacky-desktop kernel: [ 1.136530] ata5.00: ATAPI: ATAPI DVD D DH16DYP, WL31, max UDMA/33
Oct 12 20:47:46 jacky-desktop kernel: [ 1.168509] ata5.00: configured for UDMA/33
Oct 12 20:47:46 jacky-desktop kernel: [ 1.257065] usb 3-1: configuration #1 chosen from 1 choice
Oct 12 20:47:46 jacky-desktop kernel: [ 1.266362] usbcore: registered new interface driver hiddev
Oct 12 20:47:46 jacky-desktop kernel: [ 1.270143] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input4
Oct 12 20:47:46 jacky-desktop kernel: [ 1.270264] generic-usb 0003:0E8F:0020.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:12.0-1/input0
Oct 12 20:47:46 jacky-desktop kernel: [ 1.276343] ata3: SATA link down (SStatus 0 SControl 300)
Oct 12 20:47:46 jacky-desktop kernel: [ 1.276347] ata1: SATA link down (SStatus 0 SControl 300)
Oct 12 20:47:46 jacky-desktop kernel: [ 1.276422] ata2: SATA link down (SStatus 0 SControl 300)
Oct 12 20:47:46 jacky-desktop kernel: [ 1.277215] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input5
Oct 12 20:47:46 jacky-desktop kernel: [ 1.277348] generic-usb 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:12.0-1/input1
Oct 12 20:47:46 jacky-desktop kernel: [ 1.277436] usbcore: registered new interface driver usbhid
Oct 12 20:47:46 jacky-desktop kernel: [ 1.277489] usbhid: v2.6:USB HID core driver
Oct 12 20:47:46 jacky-desktop kernel: [ 1.440086] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 12 20:47:46 jacky-desktop kernel: [ 1.467109] ata4.00: ATA-8: ST3500418AS, CC44, max UDMA/133
Oct 12 20:47:46 jacky-desktop kernel: [ 1.467165] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 12 20:47:46 jacky-desktop kernel: [ 1.506704] ata4.00: configured for UDMA/133
Oct 12 20:47:46 jacky-desktop kernel: [ 1.520172] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5
Oct 12 20:47:46 jacky-desktop kernel: [ 1.520366] sd 3:0:0:0: Attached scsi generic sg0 type 0
Oct 12 20:47:46 jacky-desktop kernel: [ 1.520375] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 12 20:47:46 jacky-desktop kernel: [ 1.520401] sd 3:0:0:0: [sda] Write Protect is off
Oct 12 20:47:46 jacky-desktop kernel: [ 1.520415] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 20:47:46 jacky-desktop kernel: [ 1.520505] sda:
Oct 12 20:47:46 jacky-desktop kernel: [ 1.521470] scsi 4:0:0:0: CD-ROM ATAPI DVD D DH16DYP WL31 PQ: 0 ANSI: 5
Oct 12 20:47:46 jacky-desktop kernel: [ 1.524114] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
Oct 12 20:47:46 jacky-desktop kernel: [ 1.524171] Uniform CD-ROM driver Revision: 3.20
Oct 12 20:47:46 jacky-desktop kernel: [ 1.524364] sr 4:0:0:0: Attached scsi generic sg1 type 5
Oct 12 20:47:46 jacky-desktop kernel: [ 1.535999] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
Oct 12 20:47:46 jacky-desktop kernel: [ 1.617220] sd 3:0:0:0: [sda] Attached SCSI disk
Oct 12 20:47:46 jacky-desktop kernel: [ 2.216182] EXT4-fs (sda7): mounted filesystem with ordered data mode
Oct 12 20:47:46 jacky-desktop kernel: [ 6.545735] udev: starting version 151
Oct 12 20:47:46 jacky-desktop kernel: [ 6.621646] type=1505 audit(1286887666.231:2): operation="profile_load" pid=594 name="/sbin/dhclient3"
Oct 12 20:47:46 jacky-desktop kernel: [ 6.621834] type=1505 audit(1286887666.231:3): operation="profile_load" pid=594 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Oct 12 20:47:46 jacky-desktop kernel: [ 6.621939] type=1505 audit(1286887666.231:4): operation="profile_load" pid=594 name="/usr/lib/connman/scripts/dhclient-script"
Oct 12 20:47:46 jacky-desktop kernel: [ 6.684539] Adding 1286136k swap on /dev/sda9. Priority:-1 extents:1 across:1286136k
Oct 12 20:47:46 jacky-desktop kernel: [ 6.698986] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
Oct 12 20:47:46 jacky-desktop kernel: [ 6.698989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 12 20:47:46 jacky-desktop kernel: [ 6.709138] lp: driver loaded but no devices found
Oct 12 20:47:46 jacky-desktop kernel: [ 6.719595] vga16fb: mapped to 0xc00a0000
Oct 12 20:47:46 jacky-desktop kernel: [ 6.719641] fb0: VGA16 VGA frame buffer device
Oct 12 20:47:46 jacky-desktop kernel: [ 6.723260] Linux agpgart interface v0.103
Oct 12 20:47:46 jacky-desktop kernel: [ 6.736518] parport_pc 00:0a: reported by Plug and Play ACPI
Oct 12 20:47:46 jacky-desktop kernel: [ 6.736569] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Oct 12 20:47:46 jacky-desktop kernel: [ 6.744907] ppdev: user-space parallel port driver
Oct 12 20:47:46 jacky-desktop kernel: [ 6.832407] lp0: using parport0 (interrupt-driven).
Oct 12 20:47:46 jacky-desktop kernel: [ 6.851651] nvidia: module license 'NVIDIA' taints kernel.
Oct 12 20:47:46 jacky-desktop kernel: [ 6.851654] Disabling lock debugging due to kernel taint
Oct 12 20:47:46 jacky-desktop kernel: [ 6.991619] Console: switching to colour frame buffer device 80x30
Oct 12 20:47:46 jacky-desktop kernel: [ 7.121175] EXT4-fs (sda8): mounted filesystem with ordered data mode
Oct 12 20:47:46 jacky-desktop kernel: [ 7.334420] type=1505 audit(1286887666.943:5): operation="profile_load" pid=832 name="/usr/share/gdm/guest-session/Xsession"
Oct 12 20:47:46 jacky-desktop kernel: [ 7.335565] type=1505 audit(1286887666.943:6): operation="profile_replace" pid=833 name="/sbin/dhclient3"
Oct 12 20:47:46 jacky-desktop kernel: [ 7.335760] type=1505 audit(1286887666.943:7): operation="profile_replace" pid=833 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Oct 12 20:47:46 jacky-desktop kernel: [ 7.335869] type=1505 audit(1286887666.943:8): operation="profile_replace" pid=833 name="/usr/lib/connman/scripts/dhclient-script"
Oct 12 20:47:46 jacky-desktop kernel: [ 7.338053] type=1505 audit(1286887666.947:9): operation="profile_load" pid=834 name="/usr/bin/evince"
Oct 12 20:47:46 jacky-desktop kernel: [ 7.340439] type=1505 audit(1286887666.951:10): operation="profile_load" pid=834 name="/usr/bin/evince-previewer"
Oct 12 20:47:46 jacky-desktop kernel: [ 7.341974] type=1505 audit(1286887666.951:11): operation="profile_load" pid=834 name="/usr/bin/evince-thumbnailer"
Oct 12 20:47:47 jacky-desktop kernel: [ 7.602736] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 12 20:47:47 jacky-desktop kernel: [ 7.689196] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 12 20:47:47 jacky-desktop kernel: [ 7.689200] hda_intel: Disable MSI for Nvidia chipset
Oct 12 20:47:47 jacky-desktop kernel: [ 7.753925] r8169: eth0: link up
Oct 12 20:47:47 jacky-desktop kernel: [ 7.753930] r8169: eth0: link up
Oct 12 20:47:48 jacky-desktop kernel: [ 8.492469] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 12 20:47:48 jacky-desktop kernel: [ 8.492483] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Oct 12 20:47:48 jacky-desktop kernel: [ 8.492610] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
Oct 12 20:47:51 jacky-desktop kernel: [ 11.444154] r8169: WARNING! Changing of MTU on this NIC may lead to frame reception errors!
Oct 12 20:47:58 jacky-desktop kernel: Kernel logging (proc) stopped.
Oct 12 20:47:58 jacky-desktop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="798" x-info="http://www.rsyslog.com"] exiting on signal 15.
Oct 12 22:11:42 jacky-desktop kernel: imklog 4.2.0, log source = /proc/kmsg started.
Oct 12 22:11:42 jacky-desktop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="818" x-info="http://www.rsyslog.com"] (re)start
Oct 12 22:11:42 jacky-desktop rsyslogd: rsyslogd's groupid changed to 103
Oct 12 22:11:42 jacky-desktop rsyslogd: rsyslogd's userid changed to 101
Oct 12 22:11:42 jacky-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 12 22:11:42 jacky-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 12 22:11:42 jacky-desktop kernel: [ 0.000000] Linux version 2.6.32-24-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 15:30:27 UTC 2010 (Ubuntu 2.6.32-24.43-generic-pae 2.6.32.15+drm33.5)
Oct 12 22:11:42 jacky-desktop kernel: [ 0.000000] KERNEL supported cpus:
Oct 12 22:11:42 jacky-desktop kernel: [ 0.000000] Intel GenuineIntel
Oct 12 22:11:42 jacky-desktop kernel: [ 0.000000] AMD AuthenticAMD
Oct 12 22:11:42 jacky-desktop kernel: [ 0.000000] NSC Geode by NSC

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu ubiquity Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#1

Did you MD5 test the ISO you downloaded?
Did you download the DVD ISO? You cannot burn a CD ISO to a DVD media
Did you burn the DVD as slowly as possible?
Did you check the DVD for defects once initially booted to?

Revision history for this message
marcobra (Marco Braida) (marcobra) said : 		#2

May be your Ubuntu live install cd is not perfect or it can't be read from your cdrom drive please verify it...

Here some general note on install Ubuntu and howto to get a good ubuntu iso cd image (.iso) to burn on a cd:

- Here the steps to install Ubuntu 10.04.1 https://help.ubuntu.com/community/GraphicalInstall

- Here install Ubuntu video http://www.youtube.com/watch?v=XaqaDZZ_P0g&feature=fvw

Below there are some intructions to:
--- 1) Ubuntu prerequisites... and Ubuntu for pc with low power
--- 2) download the iso...
--- 3) check the md5sum of the iso image, please don't forget to check...
--- 4) burn the iso image to a cd ...
--- 5) install Ubuntu using the self made cd ...
--- 6) trouble screen at installation or at first boot after installation ...
--- 7) Ubuntu manual and online help...
--- 8) Relax and fun...

The main ubuntu site is this: www.ubuntu.com and the download location is this
http://www.ubuntu.com/desktop/get-ubuntu/download

--- 1) Ubuntu prerequisites: https://help.ubuntu.com/community/Installation/SystemRequirements

Ubuntu 10.04.1 release notes: https://wiki.ubuntu.com/LucidLynx/ReleaseNotes

https://wiki.ubuntu.com/LucidLynx/ReleaseNotes/ChangeSummary/10.04.1

If your ram is less than the recommended amount, you won't be able to install with the graphical installer,
but you might be able to use the Alternative cd, where you can use a text based installer - that uses less memory.
If your machine does have plenty of ram, you might want to try running Memcheck (which is also an option from the live cd, see below)
to just make sure your ram isn't failing.

- if your pc doesn't meet the Ubuntu prerequisites, you can try:

xubuntu http://www.xubuntu.org/get
lubuntu http://lubuntu.net/blog/lubuntu-1004-now-available-download

here a list from distrowatch: http://distrowatch.com/search.php?category=Old%20computers

- if you pc is a very low resource pc you can try different Linux distribution something like:
 DSL http://www.damnsmalllinux.org/
 Puppy Linux http://www.puppylinux.org/
 Slitaz http://www.slitaz.org/ : Slitaz 3.0 release note http://www.slitaz.org/en/doc/releases/3.0/relnotes.en.html

1.a) Please always prefer to download them using torrent if you can...

1.b) BE ABSOLUTELY SURE to verify the md5sum https://help.ubuntu.com/community/HowToMD5SUM
of the downloaded iso image BEFORE to burn it

1.c) burn it using infrarecorder if you are using Windows at lower speed you can do

1.d) boot your pc from cd and install...

--- 2) please download the 700 mb file http://www.ubuntu.com/desktop/get-ubuntu/download simply press on download button
To avoid download errors download the desired ubuntu iso install cd image using the torrent protocol.

- if you are using Windows please install a torrent client i suggest you http://deluge-torrent.org/
and download the iso using a .torrent link from here:
http://releases.ubuntu.com/10.04.1/ubuntu-10.04.1-desktop-i386.iso.torrent

--- 3) PLEASE BE SURE TO CHECK the md5sum of downloaded file to be sure it have no error https://help.ubuntu.com/community/HowToMD5SUM
Only if the md5sum number match with this: http://releases.ubuntu.com/10.04.1/MD5SUMS go to the next steps.

--- 4) burn the iso image onto a cd, to do it install and use http://infrarecorder.org/?page_id=5 burn the cd at lower speed you can do and activate the data verify

--- 5) insert the self made install cd into your pc cdrom drive and reboot your pc. YOU MUST NOT SEE Windows starting and you can try Ubuntu from cdrom and then install it

--- 6) If you have trouble with installation (the system freeze or you can't complete it) be sure to read the above suggestions, then:

Please boot entirely (you must not see windows starting) from Ubuntu live install cd and when the system start to boot from cd you will see two bottom screen icons (keyboard and man inside circle ) please press space (choose your desired language) then a screen textual center menu will appear to you with this items in it:

Try Ubuntu without installing
Install Ubuntu
Check disc for defects
Test memory
Boot from first hard disk

Please select "Test Memory" to deeply test your ram healty, if your pc freeze at installation or installation doesn't start.

Please select "Check disc for defects" and press enter to test if your cd-driver can read in a good way the live install cd... or if the install cd have some defective file in it.
Then please also perform a Test memory to be sure your pc RAM memory have not any issue

If you get a blank screen at boot after install or booting from the Ubuntu install cd please read:

http://www.ubuntugeek.com/how-to-fix-ubuntu-10-04-lts-lucid-blank-screen-at-startup.html

If you have trouble with intel8xxx graphic cards:

please try this: https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes

If you cannot boot you can also try some kernel boot options: https://help.ubuntu.com/community/BootOptions to solve.

--- 7) Ubuntu Manual, it's very informative: http://ubuntu-manual.org/
Click on the "download Button" to download the latest PDF version.

The online help https://help.ubuntu.com/10.04/index.html

--- 8) Relax and fun
http://planet.ubuntu.com/ and Full Circle Magazine http://fullcirclemagazine.org/

Revision history for this message
jacky (xinle-yang) said : 		#3

Hi,all:

     i have tried using the dvd installing on my notebook(lenovo-Y530),and it worked well .
so,the problem is not caused by MD5 or cd/dvd .
    i forgot highlight the critical location,now i paste it here:

Oct 12 20:47:51 jacky-desktop kernel: [ 11.444154] r8169: WARNING! Changing of MTU on this NIC may lead to frame reception errors!
Oct 12 20:47:58 jacky-desktop kernel: Kernel logging (proc) stopped.

    did any one know this issue, today i will reset configurations of my motherboard and try to install again.thanks , marcobra and actionparsnip.

Revision history for this message
AF575 (af575) said : 		#4

All that crap and we could be kissing fat CHICKS with huuuummmeroids ...Golly willickers Beav!!!

Revision history for this message
delance (olivier-delance) said : 		#5

"but when i run the DVD, the screen got blank or the last picture of last shutdown, cannot get the mouse except for the sound."
The computer behavior is not supposed to be random.

Could you try to boot on CD, choose option "Try without install" and report exactly what happens.
As "Try without install" make a smaller usage of graphic card, it could work on it and not after install.
In upper menu, you will find System->Administration->Check Hardware (or something like this, I have a French interface). Could you check video, audio and network.

Revision history for this message
jacky (xinle-yang) said : 		#6

hi,delance :

        i didn't understand what you are saying about , i boot from cd , but cannot find option you says, even cannot get into the user interface. when cd boot ready , only show a blank but no mouse cursor,
please look at the critical infomation below:

the only error:

Oct 12 20:47:51 jacky-desktop kernel: [ 11.444154] r8169: WARNING! Changing of MTU on this NIC may lead to frame reception errors!
Oct 12 20:47:58 jacky-desktop kernel: Kernel logging (proc) stopped.

i got nothing in this file--> /etc/log/message except for these phrases.

Revision history for this message
delance (olivier-delance) said : 		#7

The first message is a warning, so it's not a critical information, and boot failure occurs 7 seconds after.
Messages are from 12 October, it seems that they are related to another boot.
If you get directly a blank screen at boot of Ubuntu CD, have a look at:
     http://www.ubuntugeek.com/how-to-fix-ubuntu-10-04-lts-lucid-blank-screen-at-startup.html
and please, if you need help, provide model of graphic card and its processor (ARI, Nvidia or Intel).

Can you help with this problem?

Provide an answer of your own, or ask jacky for more information if necessary.

To post a message you must log in.