how to configure audio for pinacle pctv 50i pci card with tvtime in ubuntu

Asked by Jani on 2008-10-08

I was installed pci pinacle pctv 50i tv tuner card and configured it with tvtime. Its working fine and detecting channels.
But no sound is detected from that. please help to configure audio for my tv tuner card.
In windows XP and Vista Tv tuner card working well including audio.
It has audio problem in ubuntu and pclinux os.

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu tvtime Edit question
Assignee:
No assignee Edit question
Last query:
2008-10-08
Last reply:
2009-06-18
jacobS (jacsalomon) said : #1

Ok Jani the problem is two posibly way:

The match of number card=xx and tuner=xx don't match or

You need setting all volume sound controls in middle especially LIne.

Please, Go a Terminal and Post me

dmesg

Manny (masterchong) said : #2

hey

ive got the same problem here's what terminal gave when i typed dmesg:

[ 0.642485] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.642491] pci 0000:00:1c.2: setting latency timer to 64
[ 0.642500] pci 0000:00:1e.0: setting latency timer to 64
[ 0.642511] pci 0000:08:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.642519] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.642521] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.642524] bus: 02 index 0 io port: [0x2000-0x2fff]
[ 0.642526] bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff]
[ 0.642529] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
[ 0.642531] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.642533] bus: 04 index 0 io port: [0x3000-0x3fff]
[ 0.642535] bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff]
[ 0.642537] bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff]
[ 0.642540] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.642542] bus: 06 index 0 io port: [0x4000-0x4fff]
[ 0.642544] bus: 06 index 1 mmio: [0xfa000000-0xfbffffff]
[ 0.642546] bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff]
[ 0.642548] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.642550] bus: 08 index 0 io port: [0x5000-0x5fff]
[ 0.642553] bus: 08 index 1 mmio: [0xfc200000-0xfc2fffff]
[ 0.642555] bus: 08 index 2 mmio: [0x88000000-0x8bffffff]
[ 0.642557] bus: 08 index 3 io port: [0x00-0xffff]
[ 0.642559] bus: 08 index 4 mmio: [0x000000-0xffffffff]
[ 0.642562] bus: 09 index 0 io port: [0x5000-0x50ff]
[ 0.642564] bus: 09 index 1 io port: [0x5400-0x54ff]
[ 0.642566] bus: 09 index 2 mmio: [0x88000000-0x8bffffff]
[ 0.642569] bus: 09 index 3 mmio: [0x90000000-0x93ffffff]
[ 0.642579] NET: Registered protocol family 2
[ 0.653058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.653344] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.653835] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.654193] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.654196] TCP reno registered
[ 0.657134] NET: Registered protocol family 1
[ 0.657275] checking if image is initramfs... it is
[ 1.351330] Freeing initrd memory: 7369k freed
[ 1.351376] Simple Boot Flag at 0x36 set to 0x1
[ 1.351572] cpufreq: No nForce2 chipset.
[ 1.351733] audit: initializing netlink socket (disabled)
[ 1.351753] type=2000 audit(1245342341.349:1): initialized
[ 1.359816] highmem bounce pool size: 64 pages
[ 1.359821] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.361308] VFS: Disk quotas dquot_6.5.1
[ 1.361374] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.362037] fuse init (API version 7.10)
[ 1.362130] msgmni has been set to 1698
[ 1.362320] alg: No test for stdrng (krng)
[ 1.362332] io scheduler noop registered
[ 1.362335] io scheduler anticipatory registered
[ 1.362337] io scheduler deadline registered
[ 1.362354] io scheduler cfq registered (default)
[ 1.362367] pci 0000:00:02.0: Boot video device
[ 1.378447] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.378508] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.378549] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.378567] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.378584] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.378598] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.378686] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.378743] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.378781] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 1.378800] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.378814] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.378828] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.378916] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.378973] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.379011] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 1.379029] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.379045] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.379059] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.379152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.380620] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.381880] ACPI: AC Adapter [ADP1] (on-line)
[ 1.389966] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.390048] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.391296] ACPI: Lid Switch [LID0]
[ 1.391367] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.391377] ACPI: Power Button (CM) [PWRB]
[ 1.395223] ACPI: SSDT 7F6D8C02, 025F (r1 Sony VAIO 20080228 PTL 20050624)
[ 1.395685] ACPI: SSDT 7F6D8815, 035B (r1 Sony VAIO 20080228 PTL 20050624)
[ 1.398560] Monitor-Mwait will be used to enter C-1 state
[ 1.398563] Monitor-Mwait will be used to enter C-2 state
[ 1.398566] Monitor-Mwait will be used to enter C-3 state
[ 1.398582] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.398610] processor ACPI_CPU:00: registered as cooling_device0
[ 1.398615] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.399134] ACPI: SSDT 7F6D8E61, 00E4 (r1 Sony VAIO 20080228 PTL 20050624)
[ 1.399561] ACPI: SSDT 7F6D8B70, 0092 (r1 Sony VAIO 20080228 PTL 20050624)
[ 1.400977] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.401007] processor ACPI_CPU:01: registered as cooling_device1
[ 1.401011] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.416035] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.418621] ACPI: Thermal Zone [TZ00] (31 C)
[ 1.421139] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.425331] ACPI: Thermal Zone [TZ01] (31 C)
[ 1.425394] isapnp: Scanning for PnP cards...
[ 1.779493] isapnp: No Plug & Play device found
[ 1.784282] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.785420] brd: module loaded
[ 1.785768] loop: module loaded
[ 1.785841] Fixed MDIO Bus: probed
[ 1.785847] PPP generic driver version 2.4.2
[ 1.785910] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.785944] Driver 'sd' needs updating - please use bus_type methods
[ 1.785954] Driver 'sr' needs updating - please use bus_type methods
[ 1.785998] ahci 0000:00:1f.2: version 3.0
[ 1.786018] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.786066] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X
[ 1.786137] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 1.786140] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 1.786147] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.786290] scsi0 : ahci
[ 1.786400] scsi1 : ahci
[ 1.786465] scsi2 : ahci
[ 1.786540] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 2300
[ 1.786543] ata2: DUMMY
[ 1.786545] ata3: DUMMY
[ 2.440022] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.440874] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
[ 2.440878] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.829396] ata1.00: ATA-8: TOSHIBA MK2546GSX_200, LB012Q, max UDMA/100
[ 2.829399] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.830598] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
[ 2.830601] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.831383] ata1.00: configured for UDMA/100
[ 2.844143] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5
[ 2.844249] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 2.844267] sd 0:0:0:0: [sda] Write Protect is off
[ 2.844270] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.844298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.844369] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 2.844385] sd 0:0:0:0: [sda] Write Protect is off
[ 2.844388] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.844415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.844419] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 2.922724] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.922778] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.922842] ata_piix 0000:00:1f.1: version 2.12
[ 2.922853] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.922895] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.922986] scsi3 : ata_piix
[ 2.923058] scsi4 : ata_piix
[ 2.923982] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 2.923985] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 3.104517] ata4.00: ATAPI: PIONEER DVD-RW DVRKD08, 1.00, max UDMA/33
[ 3.136462] ata4.00: configured for UDMA/33
[ 3.397197] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVRKD08 1.00 PQ: 0 ANSI: 5
[ 3.521159] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.521163] Uniform CD-ROM driver Revision: 3.20
[ 3.521283] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.521333] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.522095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.522117] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.522141] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.522145] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.522208] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.526125] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.526133] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.526153] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc504800
[ 3.540010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.540084] usb usb1: configuration #1 chosen from 1 choice
[ 3.540114] hub 1-0:1.0: USB hub found
[ 3.540122] hub 1-0:1.0: 4 ports detected
[ 3.540238] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.540251] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.540255] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.540304] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.544218] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.544225] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.544241] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
[ 3.556009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.556070] usb usb2: configuration #1 chosen from 1 choice
[ 3.556098] hub 2-0:1.0: USB hub found
[ 3.556107] hub 2-0:1.0: 6 ports detected
[ 3.556219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.556240] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.556271] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.556279] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.556282] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.556335] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.556374] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 3.556456] usb usb3: configuration #1 chosen from 1 choice
[ 3.556483] hub 3-0:1.0: USB hub found
[ 3.556490] hub 3-0:1.0: 2 ports detected
[ 3.556585] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.556592] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.556596] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.556644] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.556682] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 3.556761] usb usb4: configuration #1 chosen from 1 choice
[ 3.556788] hub 4-0:1.0: USB hub found
[ 3.556796] hub 4-0:1.0: 2 ports detected
[ 3.556896] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.556903] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.556907] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.556953] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.556983] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 3.557073] usb usb5: configuration #1 chosen from 1 choice
[ 3.557103] hub 5-0:1.0: USB hub found
[ 3.557110] hub 5-0:1.0: 2 ports detected
[ 3.557203] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.557210] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.557214] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.557266] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.557305] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 3.557392] usb usb6: configuration #1 chosen from 1 choice
[ 3.557419] hub 6-0:1.0: USB hub found
[ 3.557428] hub 6-0:1.0: 2 ports detected
[ 3.557521] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.557528] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.557532] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.557584] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.557613] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.557696] usb usb7: configuration #1 chosen from 1 choice
[ 3.557722] hub 7-0:1.0: USB hub found
[ 3.557729] hub 7-0:1.0: 2 ports detected
[ 3.557868] usbcore: registered new interface driver libusual
[ 3.557904] usbcore: registered new interface driver usbserial
[ 3.557916] USB Serial support registered for generic
[ 3.557933] usbcore: registered new interface driver usbserial_generic
[ 3.557936] usbserial: USB Serial Driver core
[ 3.557990] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.561225] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.565455] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.565462] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.565465] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.565468] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.565470] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.569043] mice: PS/2 mouse device common for all mice
[ 3.581078] rtc_cmos 00:07: RTC can wake from S4
[ 3.581116] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.581152] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.581222] device-mapper: uevent: version 1.0.3
[ 3.581322] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <email address hidden>
[ 3.581403] device-mapper: multipath: version 1.0.5 loaded
[ 3.581406] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.581493] EISA: Probing bus 0 at eisa.0
[ 3.581500] Cannot allocate resource for EISA slot 1
[ 3.581503] Cannot allocate resource for EISA slot 2
[ 3.581506] Cannot allocate resource for EISA slot 3
[ 3.581508] Cannot allocate resource for EISA slot 4
[ 3.581510] Cannot allocate resource for EISA slot 5
[ 3.581526] EISA: Detected 0 cards.
[ 3.581652] cpuidle: using governor ladder
[ 3.581784] cpuidle: using governor menu
[ 3.582356] TCP cubic registered
[ 3.582464] NET: Registered protocol family 10
[ 3.582938] lo: Disabled Privacy Extensions
[ 3.583312] NET: Registered protocol family 17
[ 3.583332] Bluetooth: L2CAP ver 2.11
[ 3.583334] Bluetooth: L2CAP socket layer initialized
[ 3.583337] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.583339] Bluetooth: SCO socket layer initialized
[ 3.583376] Bluetooth: RFCOMM socket layer initialized
[ 3.583383] Bluetooth: RFCOMM TTY layer initialized
[ 3.583385] Bluetooth: RFCOMM ver 1.10
[ 3.583865] Marking TSC unstable due to TSC halts in idle
[ 3.584364] Using IPI No-Shortcut mode
[ 3.584453] registered taskstats version 1
[ 3.584594] Magic number: 13:423:439
[ 3.584633] pcieport-driver 0000:00:1c.0: hash matches
[ 3.584704] rtc_cmos 00:07: setting system clock to 2009-06-18 16:25:43 UTC (1245342343)
[ 3.584708] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.584710] EDD information not available.
[ 3.585056] Freeing unused kernel memory: 532k freed
[ 3.585235] Write protecting the kernel text: 4128k
[ 3.585303] Write protecting the kernel read-only data: 1532k
[ 3.782678] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.818371] sky2 driver version 1.22
[ 3.818430] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.818451] sky2 0000:02:00.0: setting latency timer to 64
[ 3.818512] sky2 0000:02:00.0: Yukon-2 FE chip revision 3
[ 3.882518] sky2 0000:02:00.0: Marvell Yukon 88E8039 Fast Ethernet Controller
[ 3.882521] Part Number: Yukon 88E8039
[ 3.882523] Engineering Level: Rev. 1.5
[ 3.882525] Manufacturer: Marvell
[ 3.882697] sky2 0000:02:00.0: irq 2299 for MSI/MSI-X
[ 3.885543] sky2 eth0: addr 00:1a:80:bc:26:93
[ 3.992271] ohci1394 0000:08:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.042092] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc206000-fc2067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.096118] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.286159] usb 5-1: configuration #1 chosen from 1 choice
[ 4.296938] usbcore: registered new interface driver hiddev
[ 4.329358] input: HID 04d9:1133 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input4
[ 4.364711] generic-usb 0003:04D9:1133.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:1d.0-1/input0
[ 4.364734] usbcore: registered new interface driver usbhid
[ 4.364738] usbhid: v2.6:USB HID core driver
[ 4.456895] PM: Starting manual resume from disk
[ 4.456900] PM: Resume from partition 8:6
[ 4.456902] PM: Checking hibernation image.
[ 4.457086] PM: Resume from disk failed.
[ 4.502533] kjournald starting. Commit interval 5 seconds
[ 4.502545] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.384179] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302a9de2f]
[ 11.014913] udev: starting version 141
[ 11.227163] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 11.304379] Linux agpgart interface v0.103
[ 11.339192] iTCO_vendor_support: vendor-support=0
[ 11.341232] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.341567] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 11.341691] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.377233] sony-laptop: Sony Notebook Control Driver v0.6.
[ 11.380012] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input5
[ 11.401262] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[ 11.416222] usbcore: registered new interface driver ndiswrapper
[ 11.424825] sony-laptop: brightness ignored, must be controlled by ACPI video driver
[ 11.424833] sony-laptop: detected Sony Vaio N Series
[ 11.472608] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 11.473081] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 11.477152] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 11.502865] acpi device:07: registered as cooling_device2
[ 11.503408] acpi device:09: registered as cooling_device3
[ 11.503720] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/input/input7
[ 11.512157] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.598519] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 11.614060] tifm_7xx1 0000:08:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.619446] yenta_cardbus 0000:08:03.0: CardBus bridge found [104d:902d]
[ 11.619472] yenta_cardbus 0000:08:03.0: Enabling burst memory read transactions
[ 11.619479] yenta_cardbus 0000:08:03.0: Using CSCINT to route CSC interrupts to PCI
[ 11.619482] yenta_cardbus 0000:08:03.0: Routing CardBus interrupts to PCI
[ 11.619488] yenta_cardbus 0000:08:03.0: TI: mfunc 0x01121b22, devctl 0x64
[ 11.722946] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 11.849470] yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 11.849475] yenta_cardbus 0000:08:03.0: Socket status: 30000006
[ 11.849480] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 11.849489] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 11.849492] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
[ 11.849782] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
[ 11.849786] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 11.948373] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.948481] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.978326] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[ 12.308705] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input9
[ 12.327586] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10
[ 12.401534] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 12.403682] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 12.404593] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 12.405381] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 12.406329] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 12.500073] Clocksource tsc unstable (delta = -94350953 ns)
[ 12.561336] lp: driver loaded but no devices found
[ 12.643648] cfg80211: Calling CRDA to update world regulatory domain
[ 12.740006] cfg80211: World regulatory domain updated:
[ 12.740011] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.740014] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.740016] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.740019] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.740022] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.740024] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.813216] ath5k_pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.813231] ath5k_pci 0000:06:00.0: setting latency timer to 64
[ 12.813356] ath5k_pci 0000:06:00.0: registered as 'phy0'
[ 12.854539] phy0: Selected rate control algorithm 'pid'
[ 12.900562] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 13.052779] Adding 3646712k swap on /dev/sda6. Priority:-1 extents:1 across:3646712k
[ 13.599230] EXT3 FS on sda5, internal journal
[ 14.698389] type=1505 audit(1245338754.612:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2178
[ 14.751246] type=1505 audit(1245338754.664:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2182
[ 14.751396] type=1505 audit(1245338754.664:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2182
[ 14.751448] type=1505 audit(1245338754.664:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2182
[ 14.751495] type=1505 audit(1245338754.664:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2182
[ 14.899841] type=1505 audit(1245338754.811:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2187
[ 14.900082] type=1505 audit(1245338754.815:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2187
[ 14.931952] type=1505 audit(1245338754.844:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2191
[ 18.456744] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.456749] Bluetooth: BNEP filters: protocol multicast
[ 18.474306] Bridge firewalling registered
[ 19.916047] ppdev: user-space parallel port driver
[ 20.866827] [drm] Initialized drm 1.1.0 20060810
[ 20.886775] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.886782] pci 0000:00:02.0: setting latency timer to 64
[ 20.886914] pci 0000:00:02.0: irq 2298 for MSI/MSI-X
[ 20.887028] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 20.890607] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 24.088538] sky2 eth0: enabling interface
[ 24.088774] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.116553] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 221.510132] wlan0: authenticate with AP 00:14:bf:6f:0d:0a
[ 221.511506] wlan0: authenticated
[ 221.511511] wlan0: associate with AP 00:14:bf:6f:0d:0a
[ 221.513759] wlan0: RX AssocResp from 00:14:bf:6f:0d:0a (capab=0x71 status=0 aid=2)
[ 221.513763] wlan0: associated
[ 221.514376] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 231.656068] wlan0: no IPv6 routers present
[ 1973.356102] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 1973.509199] usb 2-4: configuration #1 chosen from 1 choice
[ 1973.634906] Linux video capture interface: v2.00
[ 1973.651539] em28xx v4l2 driver version 0.1.0 loaded
[ 1973.651598] em28xx new video device (2304:021a): interface 0, class 255
[ 1973.651609] em28xx Has usb audio class
[ 1973.651613] em28xx #0: Alternate settings: 8
[ 1973.651618] em28xx #0: Alternate setting 0, max size= 0
[ 1973.651623] em28xx #0: Alternate setting 1, max size= 1024
[ 1973.651629] em28xx #0: Alternate setting 2, max size= 1448
[ 1973.651634] em28xx #0: Alternate setting 3, max size= 2048
[ 1973.651639] em28xx #0: Alternate setting 4, max size= 2304
[ 1973.651644] em28xx #0: Alternate setting 5, max size= 2580
[ 1973.651650] em28xx #0: Alternate setting 6, max size= 2892
[ 1973.651655] em28xx #0: Alternate setting 7, max size= 3072
[ 1973.651887] em28xx #0: em28xx chip ID = 18
[ 1973.922162] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 1a 02 12 00 11 03 98 10 6a 2e
[ 1973.922191] em28xx #0: i2c eeprom 10: 00 00 06 57 4e 00 00 00 60 00 00 00 02 00 00 00
[ 1973.922217] em28xx #0: i2c eeprom 20: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1973.922243] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
[ 1973.922269] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1973.922294] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1973.922319] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
[ 1973.922344] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 1973.922370] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
[ 1973.922395] em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 10 03 44 00 56 00 43 00
[ 1973.922420] em28xx #0: i2c eeprom a0: 31 00 30 00 30 00 00 00 32 00 30 00 33 00 35 00
[ 1973.922445] em28xx #0: i2c eeprom b0: 36 00 30 00 37 00 35 00 31 00 33 00 34 00 31 00
[ 1973.922470] em28xx #0: i2c eeprom c0: 30 00 32 00 30 00 30 00 30 00 31 00 00 00 32 00
[ 1973.922496] em28xx #0: i2c eeprom d0: 33 00 31 00 32 00 33 00 00 00 00 00 00 00 00 00
[ 1973.922521] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1973.922545] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 b5 8b 61 04 31 62 5d 0e
[ 1973.922573] EEPROM ID= 0x9567eb1a, hash = 0x13361b84
[ 1973.922577] Vendor/Product ID= 2304:021a
[ 1973.922580] AC97 audio (5 sample rates)
[ 1973.922584] 300mA max power
[ 1973.922588] Table at 0x06, strings=0x1098, 0x2e6a, 0x0000
[ 1974.304550] saa7115' 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 1975.604458] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 1975.604465] em28xx #0: Found Pinnacle Dazzle DVC 90/DVC 100
[ 1975.620141] usbcore: registered new interface driver snd-usb-audio
[ 1975.624645] usbcore: registered new interface driver em28xx

Can you help with this problem?

Provide an answer of your own, or ask Jani for more information if necessary.

To post a message you must log in.