Ubuntu
systemd package

systemd 229-2ubuntu1 source package in Ubuntu

Changelog

systemd (229-2ubuntu1) xenial; urgency=medium

  * Merge with Debian unstable. Remaining Ubuntu changes:
    - Hack to support system-image read-only /etc, and modify files in
      /etc/writable/ instead.

    Upgrade fixes, keep until 16.04 LTS release:
    - systemd Conflicts/Replaces/Provides systemd-services.
    - Remove obsolete systemd-logind upstart job.
    - Clean up obsolete /etc/udev/rules.d/README.
    - systemd.postinst: Migrate mountall specific fstab options to standard
      util-linux "nofail" option.
    - systemctl: Don't forward telinit u to upstart. This works around
      upstart's Restart() always reexec'ing /sbin/init on Restart(), even if
      that changes to point to systemd during the upgrade. This avoids running
      systemd during a dist-upgrade. (LP: #1430479)
    - Provide shutdown fallback for upstart. (LP: #1370329)
    - Break lvm (<< 2.02.133-1ubuntu1) and remove our dummy /etc/init.d/lvm2
      on upgrades, as it's shipped by lvm2 now.
    - Make udev break on mdadm << 3.3-2ubuntu3, as udev's init script dropped
      the "Provides: raid-mdadm".
    - Clean up /var/log/udev on upgrade (which is written under upstart, but
      not under systemd). (LP: #1537211)
    - Migrate existing s390x network configuration to new names. (LP: #1526808)
    - systemd.postinst: Bump Version comparison for migrating the UTC setting
      from /etc/default/rcS to /etc/adjtime, to run it for upgrades to 16.04.

systemd (229-2) unstable; urgency=medium

  * time-util: map ALARM clockids to non-ALARM clockids in now(), to work on
    architectures which don't support CLOCK_BOOTTIME_ALARM. Fixes FTBFS on
    many architectures.
  * debian/systemd.postinst: Add missing newline to /etc/adjtime migration.
    (See #699554)
  * debian/systemd.postinst: Only try to enable tmp.mount if we actually
    copied it to /etc. Don't try to enable a generated unit. (LP: #1545707)
  * debian/tests/boot-and-services: Increase timeouts of test_bash_crash from
    5 to 10 seconds, and sync the journal after every iteration.
  * debian/extra/checkout-upstream: Try again after one minute if git checkout
    fails, to avoid failures from transient network errors.
  * debian/tests/systemd-fsckd: Use grub.d/50-cloudimg-settings.cfg as a
    template for generating our custom one instead of 90-autopkgtest.cfg. The
    latter does not exist on non-x86 architectures and is not relevant for
    this test.
  * debian/tests/boot-and-services: Skip journal test for test_bash_crash when
    running against upstream, as this currently fails most of the time. To be
    investigated.
  * debian/tests/networkd: Skip test_coldplug_dhcp_ip6 when running against
    upstream, as this is brittle there. To be investigated.
  * debian/tests/bootchart: Skip test if bootchart is not available or
    testing in upstream mode. bootchart got removed from master and will be
    moved to a separate repository.
  * debian/tests/boot-and-services: Show verbose journal output on failure in
    nspawn test, and sync journal before.
  * Move systemd-coredump socket and service into systemd-coredump binary
    package.
  * Revert changing the default core dump ulimit and core_pattern. This
    completely breaks core dumps without systemd-coredump. It's also
    contradicting core(8). (Closes: #815020)
  * Fix addresses for type "sit" tunnels. (Closes: #816132)
  * networkd: Go back to letting the kernel handle IPv6 router advertisements,
    as networkd's own currently has too many regressions. Thanks to Stefan
    Lippers-Hollmann for investigating this! (Closes: #814566,
    #814667, #815586, #815884, #815793)

 -- Martin Pitt <email address hidden>  Sun, 28 Feb 2016 22:58:06 +0100

Upload details

Uploaded by:
Martin Pitt
Uploaded to:
Xenial
Original maintainer:
Ubuntu Developers
Architectures:
linux-any
Section:
admin
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
systemd_229.orig.tar.gz 4.1 MiB b51b0a48d1beb388d95bd6a98d62be05490335d4bb388aefecdcb576e91e0741
systemd_229-2ubuntu1.debian.tar.xz 121.0 KiB d61849891d29e7ab020191bc67687ec82ef762d47f6a1c48cc404e23674e5c12
systemd_229-2ubuntu1.dsc 4.1 KiB cc462935de66dac1c307327195a428a23c502e6e6cbfb78172b511c6bdb8d7e2

Available diffs

View changes file

Binary packages built by this source

libnss-myhostname: nss module providing fallback resolution for the current hostname

 This package contains a plugin for the Name Service Switch, providing host
 name resolution for the locally configured system hostname as returned by
 gethostname(2). It returns all locally configured public IP addresses or -- if
 none are configured, the IPv4 address 127.0.1.1 (which is on the local
 loopback) and the IPv6 address ::1 (which is the local host).
 .
 A lot of software relies on that the local host name is resolvable. This
 package provides an alternative to the fragile and error-prone manual editing
 of /etc/hosts.
 .
 Installing this package automatically adds myhostname to /etc/nsswitch.conf.

libnss-myhostname-dbgsym: debug symbols for package libnss-myhostname

 This package contains a plugin for the Name Service Switch, providing host
 name resolution for the locally configured system hostname as returned by
 gethostname(2). It returns all locally configured public IP addresses or -- if
 none are configured, the IPv4 address 127.0.1.1 (which is on the local
 loopback) and the IPv6 address ::1 (which is the local host).
 .
 A lot of software relies on that the local host name is resolvable. This
 package provides an alternative to the fragile and error-prone manual editing
 of /etc/hosts.
 .
 Installing this package automatically adds myhostname to /etc/nsswitch.conf.

libnss-mymachines: nss module to resolve hostnames for local container instances

 nss-mymachines is a plugin for the GNU Name Service Switch (NSS) functionality
 of the GNU C Library (glibc) providing hostname resolution for local containers
 that are registered with systemd-machined.service(8). The container names are
 resolved to IP addresses of the specific container, ordered by their scope.
 .
 Installing this package automatically adds mymachines to /etc/nsswitch.conf.

libnss-mymachines-dbgsym: debug symbols for package libnss-mymachines

 nss-mymachines is a plugin for the GNU Name Service Switch (NSS) functionality
 of the GNU C Library (glibc) providing hostname resolution for local containers
 that are registered with systemd-machined.service(8). The container names are
 resolved to IP addresses of the specific container, ordered by their scope.
 .
 Installing this package automatically adds mymachines to /etc/nsswitch.conf.

libnss-resolve: nss module to resolve names via systemd-resolved

 nss-resolve is a plugin for the GNU Name Service Switch (NSS) functionality
 of the GNU C Library (glibc) providing DNS and LLMNR resolution to programs via
 the systemd-resolved daemon (provided in the systemd package).
 .
 Installing this package automatically adds resolve to /etc/nsswitch.conf.

libnss-resolve-dbgsym: debug symbols for package libnss-resolve

 nss-resolve is a plugin for the GNU Name Service Switch (NSS) functionality
 of the GNU C Library (glibc) providing DNS and LLMNR resolution to programs via
 the systemd-resolved daemon (provided in the systemd package).
 .
 Installing this package automatically adds resolve to /etc/nsswitch.conf.

libpam-systemd: system and service manager - PAM module

 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.

libpam-systemd-dbgsym: debug symbols for package libpam-systemd

 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.

libsystemd-dev: systemd utility library - development files

 The libsystemd0 library provides interfaces to various systemd components.
 .
 This package contains the development files.

libsystemd-dev-dbgsym: debug symbols for package libsystemd-dev

 The libsystemd0 library provides interfaces to various systemd components.
 .
 This package contains the development files.

libsystemd0: systemd utility library

 The libsystemd0 library provides interfaces to various systemd components.

libsystemd0-dbgsym: debug symbols for package libsystemd0

 The libsystemd0 library provides interfaces to various systemd components.

libudev-dev: libudev development files

 This package contains the files needed for developing applications that
 use libudev.

libudev-dev-dbgsym: debug symbols for package libudev-dev

 This package contains the files needed for developing applications that
 use libudev.

libudev1: libudev shared library

 This library provides access to udev device information.

libudev1-dbgsym: debug symbols for package libudev1

 This library provides access to udev device information.

libudev1-udeb: libudev shared library

 This library provides access to udev device information.
 .
 This is a minimal version, only for use in the installation system.

libudev1-udeb-dbgsym: debug symbols for package libudev1-udeb

 This library provides access to udev device information.
 .
 This is a minimal version, only for use in the installation system.

systemd: system and service manager

 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.

systemd-container: systemd container/nspawn tools

 This package provides systemd's tools for nspawn and container/VM management:
  * systemd-nspawn
  * systemd-machined and machinectl
  * systemd-importd

systemd-container-dbgsym: debug symbols for package systemd-container

 This package provides systemd's tools for nspawn and container/VM management:
  * systemd-nspawn
  * systemd-machined and machinectl
  * systemd-importd

systemd-coredump: tools for storing and retrieving coredumps

 This package provides systemd tools for storing and retrieving coredumps:
  * systemd-coredump
  * coredumpctl

systemd-coredump-dbgsym: debug symbols for package systemd-coredump

 This package provides systemd tools for storing and retrieving coredumps:
  * systemd-coredump
  * coredumpctl

systemd-dbg: system and service manager (debug symbols)

 This package contains the debugging symbols for systemd, udev and
 related libraries.

systemd-dbgsym: debug symbols for package systemd

 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.

systemd-journal-remote: tools for sending and receiving remote journal logs

 This package provides tools for sending and receiving remote journal logs:
  * systemd-journal-remote
  * systemd-journal-upload
  * systemd-journal-gatewayd

systemd-journal-remote-dbgsym: debug symbols for package systemd-journal-remote

 This package provides tools for sending and receiving remote journal logs:
  * systemd-journal-remote
  * systemd-journal-upload
  * systemd-journal-gatewayd

systemd-sysv: system and service manager - SysV links

 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.

systemd-sysv-dbgsym: debug symbols for package systemd-sysv

 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.

udev: /dev/ and hotplug management daemon

 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.

udev-dbgsym: debug symbols for package udev

 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.

udev-udeb: /dev/ and hotplug management daemon

 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
 .
 This is a minimal version, only for use in the installation system.

udev-udeb-dbgsym: debug symbols for package udev-udeb

 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
 .
 This is a minimal version, only for use in the installation system.