RUN: /bin/echo ['echo', 'Forking build subprocess...'] Forking build subprocess... RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', '1430550-2948511', '/home/buildd/filecache-default/48d3d939952d8ba4c826184e40c09e8001e315db'] Synching the system clock with the buildd NTP service... 5 Jan 18:04:37 ntpdate[22847]: adjust time server 10.211.37.1 offset -0.072369 sec Unpacking chroot for build 1430550-2948511 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', '1430550-2948511'] Mounting chroot for build 1430550-2948511 RUN: /usr/share/launchpad-buildd/slavebin/apply-ogre-model ['apply-ogre-model', '1430550-2948511', 'main'] Attempting OGRE for main in build-1430550-2948511 No OGRE sources.list found. RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', '1430550-2948511', 'deb http://ftpmaster.internal/ubuntu lucid main'] Overriding sources.list in build-1430550-2948511 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', '1430550-2948511'] Updating debian chroot for build 1430550-2948511 Get:1 http://ftpmaster.internal lucid Release.gpg [189B] Get:2 http://ftpmaster.internal lucid Release [65.9kB] Get:3 http://ftpmaster.internal lucid/main Packages [1387kB] Fetched 1453kB in 1s (816kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: libplymouth2 libpng12-0 The following packages will be upgraded: apt apt-transport-https bash binutils bsdutils cpp-4.4 g++-4.4 gcc-4.4 gcc-4.4-base gnupg gpgv ifupdown libblkid1 libc-bin libc-dev-bin libc6 libc6-dev libgcc1 libgnutls26 libgomp1 libgssapi-krb5-2 libk5crypto3 libkrb5-3 libkrb5support0 libstdc++6 libstdc++6-4.4-dev libudev0 libuuid1 linux-libc-dev lsb-base makedev mount mountall procps sed tzdata util-linux 37 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/32.3MB of archives. After this operation, 1352kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! bash mount sed lsb-base tzdata util-linux libc-dev-bin libc6-dev libc-bin libc6 linux-libc-dev libgomp1 cpp-4.4 gcc-4.4-base libgcc1 gcc-4.4 g++-4.4 libstdc++6-4.4-dev libstdc++6 binutils bsdutils libpng12-0 libplymouth2 makedev mountall apt libuuid1 libblkid1 gpgv gnupg ifupdown libgnutls26 libgssapi-krb5-2 libkrb5-3 libkrb5support0 libk5crypto3 libudev0 procps apt-transport-https debconf: delaying package configuration, since apt-utils is not installed Authentication warning overridden. (Reading database ... 12609 files and directories currently installed.) Preparing to replace bash 4.0-5ubuntu2 (using .../bash_4.1-1ubuntu1_i386.deb) ... Unpacking replacement bash ... Setting up bash (4.1-1ubuntu1) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode. (Reading database ... 12609 files and directories currently installed.) Preparing to replace mount 2.16-1ubuntu5 (using .../mount_2.16-1ubuntu6_i386.deb) ... Unpacking replacement mount ... Setting up mount (2.16-1ubuntu6) ... (Reading database ... 12609 files and directories currently installed.) Preparing to replace sed 4.2.1-4 (using .../archives/sed_4.2.1-6_i386.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-6) ... (Reading database ... 12609 files and directories currently installed.) Preparing to replace lsb-base 4.0-0ubuntu6 (using .../lsb-base_4.0-0ubuntu7_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (4.0-0ubuntu7) ... (Reading database ... 12609 files and directories currently installed.) Preparing to replace tzdata 2009s-0ubuntu1 (using .../tzdata_2009u-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2009u-1) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Jan 5 18:04:49 UTC 2010. Universal Time is now: Tue Jan 5 18:04:49 UTC 2010. Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... 12609 files and directories currently installed.) Preparing to replace util-linux 2.16-1ubuntu5 (using .../util-linux_2.16-1ubuntu6_i386.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Setting up util-linux (2.16-1ubuntu6) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. (Reading database ... 12609 files and directories currently installed.) Preparing to replace libc-dev-bin 2.10.2-2ubuntu3 (using .../libc-dev-bin_2.10.2-3ubuntu2_i386.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6-dev 2.10.2-2ubuntu3 (using .../libc6-dev_2.10.2-3ubuntu2_i386.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-bin 2.10.2-2ubuntu3 (using .../libc-bin_2.10.2-3ubuntu2_i386.deb) ... Unpacking replacement libc-bin ... Setting up libc-bin (2.10.2-3ubuntu2) ... (Reading database ... 12609 files and directories currently installed.) Preparing to replace libc6 2.10.2-2ubuntu3 (using .../libc6_2.10.2-3ubuntu2_i386.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.10.2-3ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12609 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.32-8.12 (using .../linux-libc-dev_2.6.32-9.13_i386.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libgomp1 4.4.2-5ubuntu1 (using .../libgomp1_4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement libgomp1 ... Preparing to replace cpp-4.4 4.4.2-5ubuntu1 (using .../cpp-4.4_4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement cpp-4.4 ... Preparing to replace gcc-4.4-base 4.4.2-5ubuntu1 (using .../gcc-4.4-base_4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement gcc-4.4-base ... Setting up gcc-4.4-base (4.4.2-8ubuntu2) ... (Reading database ... 12609 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.2-5ubuntu1 (using .../libgcc1_1%3a4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.2-8ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12609 files and directories currently installed.) Preparing to replace gcc-4.4 4.4.2-5ubuntu1 (using .../gcc-4.4_4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement gcc-4.4 ... Preparing to replace g++-4.4 4.4.2-5ubuntu1 (using .../g++-4.4_4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement g++-4.4 ... Preparing to replace libstdc++6-4.4-dev 4.4.2-5ubuntu1 (using .../libstdc++6-4.4-dev_4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement libstdc++6-4.4-dev ... Preparing to replace libstdc++6 4.4.2-5ubuntu1 (using .../libstdc++6_4.4.2-8ubuntu2_i386.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.2-8ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12609 files and directories currently installed.) Preparing to replace binutils 2.20-4ubuntu3 (using .../binutils_2.20-4ubuntu4_i386.deb) ... Unpacking replacement binutils ... Preparing to replace bsdutils 1:2.16-1ubuntu5 (using .../bsdutils_1%3a2.16-1ubuntu6_i386.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.16-1ubuntu6) ... Selecting previously deselected package libpng12-0. (Reading database ... 12609 files and directories currently installed.) Unpacking libpng12-0 (from .../libpng12-0_1.2.41-1_i386.deb) ... Selecting previously deselected package libplymouth2. Unpacking libplymouth2 (from .../libplymouth2_0.8.0~-6_i386.deb) ... Preparing to replace makedev 2.3.1-89 (using .../makedev_2.3.1-89ubuntu1_all.deb) ... Unpacking replacement makedev ... Setting up libpng12-0 (1.2.41-1) ... Setting up libplymouth2 (0.8.0~-6) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12632 files and directories currently installed.) Preparing to replace mountall 1.1 (using .../archives/mountall_2.3_i386.deb) ... Unpacking replacement mountall ... Preparing to replace apt 0.7.24ubuntu1 (using .../apt_0.7.25ubuntu2_i386.deb) ... Unpacking replacement apt ... Setting up apt (0.7.25ubuntu2) ... Installing new version of config file /etc/logrotate.d/apt ... Installing new version of config file /etc/cron.daily/apt ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12647 files and directories currently installed.) Preparing to replace libuuid1 2.16-1ubuntu5 (using .../libuuid1_2.16-1ubuntu6_i386.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.16-1ubuntu6) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12647 files and directories currently installed.) Preparing to replace libblkid1 2.16-1ubuntu5 (using .../libblkid1_2.16-1ubuntu6_i386.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.16-1ubuntu6) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 12647 files and directories currently installed.) Preparing to replace gpgv 1.4.9-4ubuntu7 (using .../gpgv_1.4.10-2ubuntu1_i386.deb) ... Unpacking replacement gpgv ... Preparing to replace gnupg 1.4.9-4ubuntu7 (using .../gnupg_1.4.10-2ubuntu1_i386.deb) ... Unpacking replacement gnupg ... Preparing to replace ifupdown 0.6.8ubuntu23 (using .../ifupdown_0.6.8ubuntu25_i386.deb) ... Unpacking replacement ifupdown ... Preparing to replace libgnutls26 2.8.4-2 (using .../libgnutls26_2.8.5-2_i386.deb) ... Unpacking replacement libgnutls26 ... Preparing to replace libgssapi-krb5-2 1.7+dfsg-3 (using .../libgssapi-krb5-2_1.7+dfsg-4_i386.deb) ... Unpacking replacement libgssapi-krb5-2 ... Preparing to replace libkrb5-3 1.7+dfsg-3 (using .../libkrb5-3_1.7+dfsg-4_i386.deb) ... Unpacking replacement libkrb5-3 ... Preparing to replace libkrb5support0 1.7+dfsg-3 (using .../libkrb5support0_1.7+dfsg-4_i386.deb) ... Unpacking replacement libkrb5support0 ... Preparing to replace libk5crypto3 1.7+dfsg-3 (using .../libk5crypto3_1.7+dfsg-4_i386.deb) ... Unpacking replacement libk5crypto3 ... Preparing to replace libudev0 149-3 (using .../libudev0_149-5_i386.deb) ... Unpacking replacement libudev0 ... Preparing to replace procps 1:3.2.8-1ubuntu3 (using .../procps_1%3a3.2.8-1ubuntu4_i386.deb) ... Unpacking replacement procps ... Preparing to replace apt-transport-https 0.7.24ubuntu1 (using .../apt-transport-https_0.7.25ubuntu2_i386.deb) ... Unpacking replacement apt-transport-https ... Setting up libc-dev-bin (2.10.2-3ubuntu2) ... Setting up linux-libc-dev (2.6.32-9.13) ... Setting up libc6-dev (2.10.2-3ubuntu2) ... Setting up libgomp1 (4.4.2-8ubuntu2) ... Setting up cpp-4.4 (4.4.2-8ubuntu2) ... Setting up binutils (2.20-4ubuntu4) ... Setting up gcc-4.4 (4.4.2-8ubuntu2) ... Setting up makedev (2.3.1-89ubuntu1) ... Setting up gpgv (1.4.10-2ubuntu1) ... Setting up gnupg (1.4.10-2ubuntu1) ... Setting up ifupdown (0.6.8ubuntu25) ... ifupdown.postinst: Warning: No 'iface lo' definition found in /etc/network/interfaces ifupdown.postinst: Warning: No 'auto lo' statement found in /etc/network/interfaces Setting up libgnutls26 (2.8.5-2) ... Setting up libkrb5support0 (1.7+dfsg-4) ... Setting up libk5crypto3 (1.7+dfsg-4) ... Setting up libkrb5-3 (1.7+dfsg-4) ... Setting up libgssapi-krb5-2 (1.7+dfsg-4) ... Setting up libudev0 (149-5) ... Setting up procps (1:3.2.8-1ubuntu4) ... Installing new version of config file /etc/sysctl.d/README ... Installing new version of config file /etc/sysctl.conf ... Setting up apt-transport-https (0.7.25ubuntu2) ... Setting up mountall (2.3) ... Installing new version of config file /etc/init/mountall.conf ... Installing new version of config file /etc/init/mountall-reboot.conf ... Installing new version of config file /etc/init/mountall-shell.conf ... Setting up libstdc++6-4.4-dev (4.4.2-8ubuntu2) ... Setting up g++-4.4 (4.4.2-8ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', '1430550-2948511', '--nolog', '--batch', '--archive=ubuntu', '-A', '--purpose=PRIMARY', '--dist=lucid', '--comp=main', 'pygobject_2.21.1-0ubuntu1.dsc'] Initiating build 1430550-2948511 with 2 processor cores. Automatic build of pygobject_2.21.1-0ubuntu1 on vernadsky by sbuild/i386 1.170.5 Build started at 20100105-1805 ****************************************************************************** pygobject_2.21.1-0ubuntu1.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5), python-support (>= 0.4), gnome-pkg-tools (>= 0.10), cdbs, quilt, python-all-dev (>= 2.5), libglib2.0-dev (>= 2.23.1), libffi-dev (>= 3.0.5), xsltproc, docbook-xsl, autotools-dev, python-all-dbg Build-Conflicts: python2.3-dev (<< 2.3.5) Checking for already installed source dependencies... debhelper: missing python-support: missing gnome-pkg-tools: missing cdbs: missing quilt: missing python-all-dev: missing libglib2.0-dev: missing libffi-dev: missing xsltproc: missing docbook-xsl: missing autotools-dev: missing python-all-dbg: missing python2.3-dev: already deinstalled Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper python-support gnome-pkg-tools cdbs quilt python-all-dev libglib2.0-dev libffi-dev xsltproc docbook-xsl autotools-dev python-all-dbg Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: autoconf automake bsdmainutils diffstat fdupes file gettext gettext-base groff-base html2text intltool intltool-debian libcroco3 libexpat1 libffi5 libglib2.0-0 libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libncursesw5 libpcre3 libpython2.6 libsqlite3-0 liburi-perl libwww-perl libxml-parser-perl libxml2 libxslt1.1 m4 man-db mime-support pkg-config po-debconf python python-all python-dbg python-dev python2.6 python2.6-dbg python2.6-dev sgml-base xml-core zlib1g-dev Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc libtool wamerican wordlist whois vacation devscripts doc-base dh-make libsaxon-java libxalan2-java docbook-xsl-saxon fop xalan dbtoepub gettext-doc svn-buildpackage groff libglib2.0-doc libdata-dump-perl libcrypt-ssleay-perl libio-socket-ssl-perl less www-browser libmail-box-perl python-doc python-tk python-profiler python2.6-doc python2.6-profiler python-gdbm-dbg python-tk-dbg procmail graphviz sgml-base-doc Recommended packages: docbook-xml docbook-xsl-doc-html docbook-xsl-doc-pdf docbook-xsl-doc-text docbook-xsl-doc curl wget lynx cvs libglib2.0-data shared-mime-info libgpm2 libmailtools-perl libhtml-format-perl libcompress-bzip2-perl libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autotools-dev bsdmainutils cdbs debhelper diffstat docbook-xsl fdupes file gettext gettext-base gnome-pkg-tools groff-base html2text intltool intltool-debian libcroco3 libexpat1 libffi-dev libffi5 libglib2.0-0 libglib2.0-dev libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libmagic1 libncursesw5 libpcre3 libpython2.6 libsqlite3-0 liburi-perl libwww-perl libxml-parser-perl libxml2 libxslt1.1 m4 man-db mime-support pkg-config po-debconf python python-all python-all-dbg python-all-dev python-dbg python-dev python-support python2.6 python2.6-dbg python2.6-dev quilt sgml-base xml-core xsltproc zlib1g-dev 0 upgraded, 56 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/34.8MB of archives. After this operation, 112MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmagic1 file libpcre3 libglib2.0-0 libncursesw5 libsqlite3-0 libxml2 mime-support python2.6 python sgml-base xml-core bsdmainutils gettext-base groff-base libexpat1 liburi-perl libhtml-tagset-perl libhtml-parser-perl libhtml-tree-perl libwww-perl libxml-parser-perl man-db python-support m4 autoconf autotools-dev automake html2text libcroco3 gettext intltool-debian po-debconf debhelper fdupes intltool cdbs diffstat docbook-xsl gnome-pkg-tools zlib1g-dev pkg-config libglib2.0-dev libpython2.6 libxslt1.1 python-all python2.6-dev python-dev python-all-dev quilt xsltproc libffi5 libffi-dev python2.6-dbg python-dbg python-all-dbg debconf: delaying package configuration, since apt-utils is not installed Authentication warning overridden. Selecting previously deselected package libmagic1. (Reading database ... 12654 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_5.03-5_i386.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_5.03-5_i386.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-3_i386.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.23.1-1ubuntu1_i386.deb) ... Selecting previously deselected package libncursesw5. Unpacking libncursesw5 (from .../libncursesw5_5.7+20090803-2ubuntu2_i386.deb) ... Selecting previously deselected package libsqlite3-0. Unpacking libsqlite3-0 (from .../libsqlite3-0_3.6.21-2_i386.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1ubuntu1_i386.deb) ... Selecting previously deselected package mime-support. Unpacking mime-support (from .../mime-support_3.48-1_all.deb) ... Selecting previously deselected package python2.6. Unpacking python2.6 (from .../python2.6_2.6.4-1ubuntu2_i386.deb) ... Selecting previously deselected package python. Unpacking python (from .../python_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package sgml-base. Unpacking sgml-base (from .../sgml-base_1.26_all.deb) ... Selecting previously deselected package xml-core. Unpacking xml-core (from .../archives/xml-core_0.13_all.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.0.1ubuntu1_i386.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8ubuntu2_i386.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-6_i386.deb) ... Selecting previously deselected package libexpat1. Unpacking libexpat1 (from .../libexpat1_2.0.1-4ubuntu1_i386.deb) ... Selecting previously deselected package liburi-perl. Unpacking liburi-perl (from .../liburi-perl_1.50-1ubuntu1_all.deb) ... Selecting previously deselected package libhtml-tagset-perl. Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ... Selecting previously deselected package libhtml-parser-perl. Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.64-1_i386.deb) ... Selecting previously deselected package libhtml-tree-perl. Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_3.23-1_all.deb) ... Selecting previously deselected package libwww-perl. Unpacking libwww-perl (from .../libwww-perl_5.831-1_all.deb) ... Selecting previously deselected package libxml-parser-perl. Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.36-1.1build2_i386.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-4_i386.deb) ... Selecting previously deselected package python-support. Unpacking python-support (from .../python-support_1.0.4ubuntu1_all.deb) ... Selecting previously deselected package m4. Unpacking m4 (from .../archives/m4_1.4.13-3_i386.deb) ... Selecting previously deselected package autoconf. Unpacking autoconf (from .../autoconf_2.65-3ubuntu1_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20090611.1_all.deb) ... Selecting previously deselected package automake. Unpacking automake (from .../automake_1%3a1.11-1_all.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_i386.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_i386.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8ubuntu2_i386.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.10ubuntu1_all.deb) ... Selecting previously deselected package fdupes. Unpacking fdupes (from .../fdupes_1.50-PR2-2_i386.deb) ... Selecting previously deselected package intltool. Unpacking intltool (from .../intltool_0.41.0-0ubuntu1_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.62+nmu1ubuntu2_all.deb) ... Selecting previously deselected package diffstat. Unpacking diffstat (from .../diffstat_1.47-1_i386.deb) ... Selecting previously deselected package docbook-xsl. Unpacking docbook-xsl (from .../docbook-xsl_1.75.2+dfsg-3_all.deb) ... Selecting previously deselected package gnome-pkg-tools. Unpacking gnome-pkg-tools (from .../gnome-pkg-tools_0.16ubuntu1_all.deb) ... Selecting previously deselected package zlib1g-dev. Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.3.dfsg-15ubuntu1_i386.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.22-1build1_i386.deb) ... Selecting previously deselected package libglib2.0-dev. Unpacking libglib2.0-dev (from .../libglib2.0-dev_2.23.1-1ubuntu1_i386.deb) ... Selecting previously deselected package libpython2.6. Unpacking libpython2.6 (from .../libpython2.6_2.6.4-1ubuntu2_i386.deb) ... Selecting previously deselected package libxslt1.1. Unpacking libxslt1.1 (from .../libxslt1.1_1.1.24-2ubuntu2_i386.deb) ... Selecting previously deselected package python-all. Unpacking python-all (from .../python-all_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package python2.6-dev. Unpacking python2.6-dev (from .../python2.6-dev_2.6.4-1ubuntu2_i386.deb) ... Selecting previously deselected package python-dev. Unpacking python-dev (from .../python-dev_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package python-all-dev. Unpacking python-all-dev (from .../python-all-dev_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package quilt. Unpacking quilt (from .../quilt_0.48-1ubuntu1_all.deb) ... Selecting previously deselected package xsltproc. Unpacking xsltproc (from .../xsltproc_1.1.24-2ubuntu2_i386.deb) ... Selecting previously deselected package libffi5. Unpacking libffi5 (from .../libffi5_3.0.9~rc3-1_i386.deb) ... Selecting previously deselected package libffi-dev. Unpacking libffi-dev (from .../libffi-dev_3.0.9~rc3-1_i386.deb) ... Selecting previously deselected package python2.6-dbg. Unpacking python2.6-dbg (from .../python2.6-dbg_2.6.4-1ubuntu2_i386.deb) ... Selecting previously deselected package python-dbg. Unpacking python-dbg (from .../python-dbg_2.6.4-0ubuntu2_all.deb) ... Selecting previously deselected package python-all-dbg. Unpacking python-all-dbg (from .../python-all-dbg_2.6.4-0ubuntu2_all.deb) ... Setting up libmagic1 (5.03-5) ... Setting up file (5.03-5) ... Setting up libpcre3 (7.8-3) ... Setting up libglib2.0-0 (2.23.1-1ubuntu1) ... Setting up libncursesw5 (5.7+20090803-2ubuntu2) ... Setting up libsqlite3-0 (3.6.21-2) ... Setting up libxml2 (2.7.6.dfsg-1ubuntu1) ... Setting up mime-support (3.48-1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode. Setting up python2.6 (2.6.4-1ubuntu2) ... Setting up python (2.6.4-0ubuntu2) ... Setting up sgml-base (1.26) ... Setting up xml-core (0.13) ... Setting up bsdmainutils (8.0.1ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up gettext-base (0.17-8ubuntu2) ... Setting up groff-base (1.20.1-6) ... Setting up libexpat1 (2.0.1-4ubuntu1) ... Setting up liburi-perl (1.50-1ubuntu1) ... Setting up libhtml-tagset-perl (3.20-2) ... Setting up libhtml-parser-perl (3.64-1) ... Setting up libhtml-tree-perl (3.23-1) ... Setting up libwww-perl (5.831-1) ... Setting up libxml-parser-perl (2.36-1.1build2) ... Setting up man-db (2.5.6-4) ... Building database of manual pages ... Setting up python-support (1.0.4ubuntu1) ... Setting up m4 (1.4.13-3) ... Setting up autoconf (2.65-3ubuntu1) ... Setting up autotools-dev (20090611.1) ... Setting up automake (1:1.11-1) ... update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode. Setting up html2text (1.3.2a-14) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext (0.17-8ubuntu2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.4.10ubuntu1) ... Setting up fdupes (1.50-PR2-2) ... Setting up intltool (0.41.0-0ubuntu1) ... Setting up cdbs (0.4.62+nmu1ubuntu2) ... Setting up diffstat (1.47-1) ... Setting up docbook-xsl (1.75.2+dfsg-3) ... Setting up gnome-pkg-tools (0.16ubuntu1) ... Setting up zlib1g-dev (1:1.2.3.3.dfsg-15ubuntu1) ... Setting up pkg-config (0.22-1build1) ... Setting up libglib2.0-dev (2.23.1-1ubuntu1) ... Setting up libpython2.6 (2.6.4-1ubuntu2) ... Setting up libxslt1.1 (1.1.24-2ubuntu2) ... Setting up python-all (2.6.4-0ubuntu2) ... Setting up python2.6-dev (2.6.4-1ubuntu2) ... Setting up python-dev (2.6.4-0ubuntu2) ... Setting up python-all-dev (2.6.4-0ubuntu2) ... Setting up quilt (0.48-1ubuntu1) ... Setting up xsltproc (1.1.24-2ubuntu2) ... Setting up libffi5 (3.0.9~rc3-1) ... Setting up libffi-dev (3.0.9~rc3-1) ... Setting up python2.6-dbg (2.6.4-1ubuntu2) ... Setting up python-dbg (2.6.4-0ubuntu2) ... Setting up python-all-dbg (2.6.4-0ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.10.2-3ubuntu2 make_3.81-7 dpkg-dev_1.15.4.1ubuntu1 g++-4.4_4.4.2-8ubuntu2 gcc-4.4_4.4.2-8ubuntu2 binutils_2.20-4ubuntu4 libstdc++6_4.4.2-8ubuntu2 libstdc++6-4.4-dev_4.4.2-8ubuntu2 ------------------------------------------------------------------------------ gpgv: Signature made Tue Jan 5 15:20:06 2010 UTC using DSA key ID A2D7D292 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./pygobject_2.21.1-0ubuntu1.dsc dpkg-source: info: extracting pygobject in pygobject-2.21.1 dpkg-source: info: unpacking pygobject_2.21.1.orig.tar.gz dpkg-source: info: applying pygobject_2.21.1-0ubuntu1.diff.gz dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package pygobject dpkg-buildpackage: source version 2.21.1-0ubuntu1 dpkg-buildpackage: host architecture i386 /usr/bin/fakeroot debian/rules clean { cat /usr/share/gnome-pkg-tools/control.header ; \ sed "s/@GNOME_TEAM@/Debian GNOME Maintainers , Josselin Mouette , Sjoerd Simons /" debian/control.in ; } \ > debian/control dh_testdir dh_testroot rm -f install-stamp rm -rf build-* dbg-build-* /usr/bin/make -f debian/rules unpatch make[1]: Entering directory `/build/buildd/pygobject-2.21.1' rm -f patch-stamp # restore files from backup (before unpatching) [ ! -r config.sub.orig ] || \ cp config.sub.orig config.sub [ ! -r config.guess.orig ] || \ cp config.guess.orig config.guess # unapply patches, if any QUILT_PATCHES=/build/buildd/pygobject-2.21.1/debian/patches quilt --quiltrc /dev/null pop -a || test $? = 2 No patch removed rm -rf .pc make[1]: Leaving directory `/build/buildd/pygobject-2.21.1' dh_clean *.pyc */*.pyc debian/rules build dh_testdir # apply patches QUILT_PATCHES=/build/buildd/pygobject-2.21.1/debian/patches quilt --quiltrc /dev/null push -a || test $? = 2 Applying patch 03_maintainer_mode.patch patching file configure.ac Hunk #1 succeeded at 28 (offset 1 line). Applying patch 04_testsuite_gtk.patch patching file tests/runtests.py Applying patch 64_gil_locking.patch patching file gobject/pygobject.c Hunk #1 succeeded at 294 (offset 3 lines). Hunk #2 succeeded at 1080 (offset 12 lines). Hunk #3 succeeded at 1214 (offset 12 lines). Hunk #4 succeeded at 1266 (offset 12 lines). Now at patch 64_gil_locking.patch # backup the original files to restore them in the clean target [ ! -r config.sub ] || \ (cp config.sub config.sub.orig && \ cp /usr/share/misc/config.sub config.sub) [ ! -r config.guess ] || \ (cp config.guess config.guess.orig && \ cp /usr/share/misc/config.guess config.guess) touch patch-stamp dh_testdir mkdir -p build-2.6 cd build-2.6 && \ PYTHON=/usr/bin/python2.6 CFLAGS="-g -O2 -Wall -g -O2" \ /build/buildd/pygobject-2.21.1/configure --prefix=/usr --enable-thread --build=i486-linux-gnu --disable-maintainer-mode configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking build system type... i486-pc-linux-gnu checking host system type... i486-pc-linux-gnu checking for some Win32 platform... no checking for native Win32... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 805306365 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating ./config.lt config.lt: creating libtool checking whether gcc and cc understand -c and -o together... yes checking whether /usr/bin/python2.6 version >= 2.3.5... yes checking for /usr/bin/python2.6 version... 2.6 checking for /usr/bin/python2.6 platform... linux2 checking for /usr/bin/python2.6 script directory... ${prefix}/lib/python2.6/site-packages checking for /usr/bin/python2.6 extension module directory... ${exec_prefix}/lib/python2.6/site-packages checking for python version... (cached) 2.6 checking for python platform... (cached) linux2 checking for python script directory... (cached) ${prefix}/lib/python2.6/site-packages checking for python extension module directory... (cached) ${exec_prefix}/lib/python2.6/site-packages checking for headers required to compile python extensions... found checking for PySignal_SetWakeupFd in Python.h... yes checking for python module thread... yes checking whether to enable threading in pygobject... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.16... yes checking for GLIB - version >= 2.22.4... yes (version 2.23.1) checking for ffi... checking for FFI... yes yes checking for GIO... yes checking for GIOUNIX... yes checking whether gcc understands -fno-strict-aliasing... yes checking whether gcc understands -std=c9x... yes configure: creating ./config.status config.status: creating Makefile config.status: creating pygobject-2.0.pc config.status: creating pygobject-2.0-uninstalled.pc config.status: creating codegen/Makefile config.status: creating codegen/pygobject-codegen-2.0 config.status: creating docs/Makefile config.status: creating docs/reference/entities.docbook config.status: creating docs/xsl/fixxref.py config.status: creating glib/Makefile config.status: creating gobject/Makefile config.status: creating gio/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating PKG-INFO config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-maintainer-mode libffi support: yes touch build-2.6/configure-stamp dh_testdir PYTHON=/usr/bin/python2.6 /usr/bin/make -C build-2.6 pyexecdir=/var/lib/python-support/python2.6 make[1]: Entering directory `/build/buildd/pygobject-2.21.1/build-2.6' cd /build/buildd/pygobject-2.21.1 && /bin/bash /build/buildd/pygobject-2.21.1/missing --run aclocal-1.10 -I m4 /build/buildd/pygobject-2.21.1/missing: line 54: aclocal-1.10: command not found WARNING: `aclocal-1.10' is missing on your system. You should only need it if you modified `acinclude.m4' or `configure.ac'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. cd /build/buildd/pygobject-2.21.1 && /bin/bash /build/buildd/pygobject-2.21.1/missing --run automake-1.10 --gnu /build/buildd/pygobject-2.21.1/missing: line 54: automake-1.10: command not found WARNING: `automake-1.10' is missing on your system. You should only need it if you modified `Makefile.am', `acinclude.m4' or `configure.ac'. You might want to install the `Automake' and `Perl' packages. Grab them from any GNU archive site. cd /build/buildd/pygobject-2.21.1 && /bin/bash /build/buildd/pygobject-2.21.1/missing --run autoconf aclocal.m4:16: warning: this file was generated for autoconf 2.64. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:31: error: possibly undefined macro: AM_MAINTAINER_MODE If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. make[1]: *** [/build/buildd/pygobject-2.21.1/configure] Error 1 make[1]: Leaving directory `/build/buildd/pygobject-2.21.1/build-2.6' make: *** [build-2.6/build-stamp] Error 2 rm build-2.6/configure-stamp dpkg-buildpackage: error: debian/rules build gave error exit status 2 ****************************************************************************** Build finished at 20100105-1805 FAILED [dpkg-buildpackage died] Purging chroot-autobuild/build/buildd/pygobject-2.21.1 ------------------------------------------------------------------------------ /usr/bin/sudo dpkg --purge groff-base libglib2.0-0 mime-support m4 gettext file zlib1g-dev libhtml-parser-perl intltool python2.6-dbg python-all-dbg libffi5 libwww-perl liburi-perl libhtml-tree-perl autotools-dev po-debconf libglib2.0-dev quilt python2.6 libxml-parser-perl libcroco3 libhtml-tagset-perl python-support libxml2 pkg-config libpython2.6 automake libffi-dev python-dbg python-all-dev python-all python-dev man-db intltool-debian xml-core cdbs diffstat html2text gettext-base python2.6-dev debhelper sgml-base python libxslt1.1 libmagic1 gnome-pkg-tools libexpat1 libsqlite3-0 bsdmainutils fdupes libpcre3 xsltproc autoconf docbook-xsl libncursesw5 (Reading database ... 16564 files and directories currently installed.) Removing python-all-dbg ... Removing libglib2.0-dev ... Removing quilt ... Purging configuration files for quilt ... Removing python-support ... Purging configuration files for python-support ... Removing pkg-config ... Removing libffi-dev ... Removing python-dbg ... Removing python-all-dev ... Removing python-all ... Removing python-dev ... Removing cdbs ... Removing diffstat ... Removing python2.6-dev ... Removing debhelper ... Removing python ... Purging configuration files for python ... Removing gnome-pkg-tools ... Removing fdupes ... Removing xsltproc ... Removing docbook-xsl ... Purging configuration files for docbook-xsl ... Removing zlib1g-dev ... Removing intltool ... Removing python2.6-dbg ... Purging configuration files for python2.6-dbg ... Removing libffi5 ... Purging configuration files for libffi5 ... Removing po-debconf ... Removing libxml-parser-perl ... Removing libpython2.6 ... Purging configuration files for libpython2.6 ... Removing automake ... Removing man-db ... Purging configuration files for man-db ... Removing intltool-debian ... Removing xml-core ... Purging configuration files for xml-core ... dpkg: warning: while removing xml-core, directory '/etc/sgml' not empty so not removed. Removing html2text ... Purging configuration files for html2text ... Removing sgml-base ... Purging configuration files for sgml-base ... Removing libxslt1.1 ... Purging configuration files for libxslt1.1 ... Removing libexpat1 ... Purging configuration files for libexpat1 ... Removing bsdmainutils ... Purging configuration files for bsdmainutils ... Removing autoconf ... Purging configuration files for autoconf ... Removing groff-base ... Purging configuration files for groff-base ... Removing m4 ... Removing gettext ... Removing file ... Purging configuration files for file ... Removing libwww-perl ... Removing libhtml-tree-perl ... Removing autotools-dev ... Removing python2.6 ... Purging configuration files for python2.6 ... Removing libcroco3 ... Purging configuration files for libcroco3 ... Removing libxml2 ... Purging configuration files for libxml2 ... Removing gettext-base ... Removing libmagic1 ... Purging configuration files for libmagic1 ... Removing libsqlite3-0 ... Purging configuration files for libsqlite3-0 ... Removing libncursesw5 ... Purging configuration files for libncursesw5 ... Removing libglib2.0-0 ... Purging configuration files for libglib2.0-0 ... Removing mime-support ... Purging configuration files for mime-support ... Removing libhtml-parser-perl ... Removing liburi-perl ... Removing libhtml-tagset-perl ... Removing libpcre3 ... Purging configuration files for libpcre3 ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ****************************************************************************** Finished at 20100105-1805 Build needed 00:00:13, 7772k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['/usr/share/launchpad-buildd/slavebin/scan-for-processes', '1430550-2948511'] Scanning for processes to kill in build /home/buildd/build-1430550-2948511/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', '1430550-2948511'] Unmounting chroot for build 1430550-2948511... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', '1430550-2948511'] Removing build 1430550-2948511