"unknown interface wlan0=wlan0"

Asked by Niloc Deeps

In Ubuntu 8.04 my wireless connection worked "out of the box". After upgrading to 8.10 I don't get the network manager applet. I've tried many things but to no avail. I will attach various files.

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu network-manager-applet Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Niloc Deeps (ajarncolin) said :
#1

dmesg gives:
[ 0.664341] pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664345] pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664349] pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664353] pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664356] pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664360] pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664364] pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664368] pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664372] pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664375] pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664379] pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664383] pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664387] pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664391] pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664395] pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664399] pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
[ 0.664488] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:06.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:06.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:07.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:07.0 BAR 8 (0x0-0xfffff), disabling
[ 0.664488] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
[ 0.664488] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.664488] pnp: PnP ACPI: found 10 devices
[ 0.664488] ACPI: ACPI bus type pnp unregistered
[ 0.664488] PCI: Using ACPI for IRQ routing
[ 0.664488] pci 0000:00:04.0: BAR 7: can't allocate resource
[ 0.664488] pci 0000:00:04.0: BAR 8: can't allocate resource
[ 0.664488] pci 0000:00:05.0: BAR 7: can't allocate resource
[ 0.664488] pci 0000:00:05.0: BAR 8: can't allocate resource
[ 0.664488] pci 0000:00:06.0: BAR 7: can't allocate resource
[ 0.664488] pci 0000:00:06.0: BAR 8: can't allocate resource
[ 0.664488] pci 0000:00:07.0: BAR 7: can't allocate resource
[ 0.664488] pci 0000:00:07.0: BAR 8: can't allocate resource
[ 0.692044] NET: Registered protocol family 8
[ 0.692046] NET: Registered protocol family 20
[ 0.696073] NetLabel: Initializing
[ 0.696075] NetLabel: domain hash size = 128
[ 0.696077] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.696096] NetLabel: unlabeled traffic allowed by default
[ 0.697871] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.697874] actual entries 65586
[ 0.698044] AppArmor: AppArmor Filesystem Enabled
[ 0.698079] ACPI: RTC can wake from S4
[ 0.708065] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.708069] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.708073] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.708088] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.708092] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.708102] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.715096] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.715096] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.715096] pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff
[ 0.715096] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.715096] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.715096] pci 0000:00:04.0: IO window: disabled
[ 0.715096] pci 0000:00:04.0: MEM window: disabled
[ 0.715096] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.715096] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[ 0.715096] pci 0000:00:05.0: IO window: disabled
[ 0.715096] pci 0000:00:05.0: MEM window: disabled
[ 0.715096] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.715096] pci 0000:00:06.0: PCI bridge, secondary bus 0000:06
[ 0.715096] pci 0000:00:06.0: IO window: disabled
[ 0.715096] pci 0000:00:06.0: MEM window: disabled
[ 0.715096] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.715096] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 0.715096] pci 0000:00:07.0: IO window: disabled
[ 0.715096] pci 0000:00:07.0: MEM window: disabled
[ 0.715096] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.715096] pci 0000:08:01.0: CardBus bridge, secondary bus 0000:09
[ 0.715096] pci 0000:08:01.0: IO window: 0x00a400-0x00a4ff
[ 0.715096] pci 0000:08:01.0: IO window: 0x00a800-0x00a8ff
[ 0.715096] pci 0000:08:01.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.715096] pci 0000:08:01.0: MEM window: 0x58000000-0x5bffffff
[ 0.715096] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.715096] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 0.715096] pci 0000:00:14.4: MEM window: 0xb0200000-0xb02fffff
[ 0.715096] pci 0000:00:14.4: PREFETCH window: 0x00000050000000-0x00000053ffffff
[ 0.715096] pci 0000:00:04.0: setting latency timer to 64
[ 0.715096] pci 0000:00:05.0: setting latency timer to 64
[ 0.715096] pci 0000:00:06.0: setting latency timer to 64
[ 0.715096] pci 0000:00:07.0: setting latency timer to 64
[ 0.715096] pci 0000:08:01.0: enabling device (0004 -> 0007)
[ 0.715096] pci 0000:08:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.715096] bus: 00 index 0 io port: [0, ffff]
[ 0.715096] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.715096] bus: 01 index 0 io port: [9000, 9fff]
[ 0.715096] bus: 01 index 1 mmio: [b0100000, b01fffff]
[ 0.715096] bus: 01 index 2 mmio: [c0000000, cfffffff]
[ 0.715096] bus: 01 index 3 mmio: [0, 0]
[ 0.715096] bus: 02 index 0 mmio: [0, fff]
[ 0.715096] bus: 02 index 1 mmio: [0, fffff]
[ 0.715096] bus: 02 index 2 mmio: [0, 0]
[ 0.715096] bus: 02 index 3 mmio: [0, 0]
[ 0.715096] bus: 03 index 0 mmio: [0, fff]
[ 0.715096] bus: 03 index 1 mmio: [0, fffff]
[ 0.715096] bus: 03 index 2 mmio: [0, 0]
[ 0.715096] bus: 03 index 3 mmio: [0, 0]
[ 0.715096] bus: 06 index 0 mmio: [0, fff]
[ 0.715096] bus: 06 index 1 mmio: [0, fffff]
[ 0.715096] bus: 06 index 2 mmio: [0, 0]
[ 0.715096] bus: 06 index 3 mmio: [0, 0]
[ 0.715096] bus: 07 index 0 mmio: [0, fff]
[ 0.715096] bus: 07 index 1 mmio: [0, fffff]
[ 0.715096] bus: 07 index 2 mmio: [0, 0]
[ 0.715096] bus: 07 index 3 mmio: [0, 0]
[ 0.715096] bus: 08 index 0 io port: [a000, afff]
[ 0.715096] bus: 08 index 1 mmio: [b0200000, b02fffff]
[ 0.715096] bus: 08 index 2 mmio: [50000000, 53ffffff]
[ 0.715096] bus: 08 index 3 io port: [0, ffff]
[ 0.715096] bus: 08 index 4 mmio: [0, ffffffffffffffff]
[ 0.715096] bus: 09 index 0 io port: [a400, a4ff]
[ 0.715096] bus: 09 index 1 io port: [a800, a8ff]
[ 0.715096] bus: 09 index 2 mmio: [50000000, 53ffffff]
[ 0.715096] bus: 09 index 3 mmio: [58000000, 5bffffff]
[ 0.715096] NET: Registered protocol family 2
[ 0.720062] Switched to high resolution mode on CPU 0
[ 0.720098] Switched to high resolution mode on CPU 1
[ 0.753145] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.753867] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.755703] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.756516] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.756520] TCP reno registered
[ 0.765163] NET: Registered protocol family 1
[ 0.765328] checking if image is initramfs... it is
[ 1.680265] Freeing initrd memory: 8383k freed
[ 1.687291] Simple Boot Flag at 0x36 set to 0x1
[ 1.689225] audit: initializing netlink socket (disabled)
[ 1.689242] type=2000 audit(1226708279.688:1): initialized
[ 1.696597] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.700795] VFS: Disk quotas dquot_6.5.1
[ 1.700938] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.701113] msgmni has been set to 1494
[ 1.701310] io scheduler noop registered
[ 1.701313] io scheduler anticipatory registered
[ 1.701315] io scheduler deadline registered
[ 1.701522] io scheduler cfq registered (default)
[ 1.701533] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.701626] pci 0000:01:05.0: Boot video device
[ 1.701808] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.701833] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.701837] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.701922] pci_express 0000:00:04.0:pcie01: allocate port service
[ 1.701993] pci_express 0000:00:04.0:pcie03: allocate port service
[ 1.702099] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.702122] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.702125] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.702210] pci_express 0000:00:05.0:pcie01: allocate port service
[ 1.702284] pci_express 0000:00:05.0:pcie03: allocate port service
[ 1.702388] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.702410] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.702414] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.702489] pci_express 0000:00:06.0:pcie01: allocate port service
[ 1.702562] pci_express 0000:00:06.0:pcie03: allocate port service
[ 1.702672] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.702695] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.702698] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.702775] pci_express 0000:00:07.0:pcie01: allocate port service
[ 1.702854] pci_express 0000:00:07.0:pcie03: allocate port service
[ 1.704636] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.706135] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.707636] aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.709148] aer 0000:00:07.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.768401] Linux agpgart interface v0.103
[ 1.768410] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.772300] brd: module loaded
[ 1.772429] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.772634] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.774850] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.776797] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.776809] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.776812] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.776815] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.776818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.800263] mice: PS/2 mouse device common for all mice
[ 1.800494] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.800525] rtc0: alarms up to one month
[ 1.800605] cpuidle: using governor ladder
[ 1.800607] cpuidle: using governor menu
[ 1.801107] TCP cubic registered
[ 1.801480] registered taskstats version 1
[ 1.801665] Magic number: 0:425:304
[ 1.801780] tty tty33: hash matches
[ 1.801865] rtc_cmos 00:04: setting system clock to 2008-11-15 00:18:01 UTC (1226708281)
[ 1.801869] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.801872] EDD information not available.
[ 1.801947] Freeing unused kernel memory: 536k freed
[ 1.802306] Write protecting the kernel read-only data: 4348k
[ 1.834528] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.971223] fuse init (API version 7.9)
[ 2.033205] ACPI: processor limited to max C-state 1
[ 2.033325] processor ACPI0007:00: registered as cooling_device0
[ 2.033429] processor ACPI0007:01: registered as cooling_device1
[ 2.037808] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.043525] ACPI: Thermal Zone [THRM] (34 C)
[ 2.421508] No dock devices found.
[ 2.438698] SCSI subsystem initialized
[ 2.490204] libata version 3.00 loaded.
[ 2.493354] usbcore: registered new interface driver usbfs
[ 2.493397] usbcore: registered new interface driver hub
[ 2.493474] usbcore: registered new device driver usb
[ 2.493652] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.493738] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.493759] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 2.497123] sata_sil 0000:00:12.0: version 2.3
[ 2.499084] scsi0 : sata_sil
[ 2.499270] scsi1 : sata_sil
[ 2.499860] ata1: SATA max UDMA/100 mmio m512@0xb0004000 tf 0xb0004080 irq 22
[ 2.499865] ata2: SATA max UDMA/100 mmio m512@0xb0004000 tf 0xb00040c0 irq 22
[ 2.503014] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.545050] 8139too Fast Ethernet driver 0.9.28
[ 2.817095] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.877566] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 8.136089] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.183109] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 13.456096] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.503120] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 18.776094] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.096093] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.154723] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 24.416094] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 24.463131] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 29.736095] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 29.783131] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
[ 35.056088] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 35.056654] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 35.056674] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 35.056755] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 35.056790] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0005000
[ 35.112247] usb usb1: configuration #1 chosen from 1 choice
[ 35.112291] hub 1-0:1.0: USB hub found
[ 35.112308] hub 1-0:1.0: 4 ports detected
[ 35.322351] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 35.322379] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 35.322434] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 35.322464] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0006000
[ 35.376238] usb usb2: configuration #1 chosen from 1 choice
[ 35.376273] hub 2-0:1.0: USB hub found
[ 35.376290] hub 2-0:1.0: 4 ports detected
[ 35.481480] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 35.481501] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 35.481564] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 35.481633] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0007000
[ 35.497059] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 35.508062] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.508239] usb usb3: configuration #1 chosen from 1 choice
[ 35.508274] hub 3-0:1.0: USB hub found
[ 35.508284] hub 3-0:1.0: 8 ports detected
[ 35.564059] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 35.722818] 8139too 0000:08:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 35.724397] scsi2 : pata_atiixp
[ 35.724829] eth0: RealTek RTL8139 at 0xa000, 00:16:36:90:ba:3c, IRQ 20
[ 35.724833] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 35.725261] scsi3 : pata_atiixp
[ 35.725531] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 35.725535] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 35.727815] b43-pci-bridge 0000:08:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 35.728059] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 35.792128] ssb: Sonics Silicon Backplane found on PCI device 0000:08:04.0
[ 36.116050] usb 3-3: new high speed USB device using ehci_hcd and address 3
[ 36.250816] usb 3-3: configuration #1 chosen from 1 choice
[ 36.277621] ata3.00: ATA-7: WDC WD1200UE-22KVT0, 01.03K01, max UDMA/100
[ 36.277626] ata3.00: 234441648 sectors, multi 16: LBA48
[ 36.277647] ata3.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.20, max UDMA/33
[ 36.285791] ata3.00: configured for UDMA/100
[ 36.300700] ata3.01: configured for UDMA/33
[ 36.456155] isa bounce pool size: 16 pages
[ 36.456269] scsi 2:0:0:0: Direct-Access ATA WDC WD1200UE-22K 01.0 PQ: 0 ANSI: 5
[ 36.456502] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[ 36.458451] scsi 2:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.20 PQ: 0 ANSI: 5
[ 36.458608] scsi 2:0:1:0: Attached scsi generic sg1 type 5
[ 36.486462] Driver 'sd' needs updating - please use bus_type methods
[ 36.486629] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 36.486655] sd 2:0:0:0: [sda] Write Protect is off
[ 36.486658] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.486702] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.486796] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 36.486818] sd 2:0:0:0: [sda] Write Protect is off
[ 36.486821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.486861] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.486866] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 36.497358] sda1 sda2 < sda5 >
[ 36.525777] sd 2:0:0:0: [sda] Attached SCSI disk
[ 36.531231] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 36.531238] Uniform CD-ROM driver Revision: 3.20
[ 36.531385] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 36.592078] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 36.800275] usb 1-1: configuration #1 chosen from 1 choice
[ 37.104062] usb 1-3: new low speed USB device using ohci_hcd and address 4
[ 37.284044] usb 1-3: device descriptor read/64, error -62
[ 37.568044] usb 1-3: device descriptor read/64, error -62
[ 37.848059] usb 1-3: new low speed USB device using ohci_hcd and address 5
[ 38.028044] usb 1-3: device descriptor read/64, error -62
[ 38.312044] usb 1-3: device descriptor read/64, error -62
[ 38.592059] usb 1-3: new low speed USB device using ohci_hcd and address 6
[ 39.000043] usb 1-3: device not accepting address 6, error -62
[ 39.176044] usb 1-3: new low speed USB device using ohci_hcd and address 7
[ 39.584058] usb 1-3: device not accepting address 7, error -62
[ 39.584102] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 39.584237] usbcore: registered new interface driver hiddev
[ 39.599539] input: HID 04d9:1133 as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input2
[ 39.613211] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:13.0-1
[ 39.613246] usbcore: registered new interface driver usbhid
[ 39.613250] usbhid: v2.6:USB HID core driver
[ 42.886876] PM: Starting manual resume from disk
[ 42.886882] PM: Resume from partition 8:5
[ 42.886885] PM: Checking hibernation image.
[ 42.887144] PM: Resume from disk failed.
[ 42.962405] kjournald starting. Commit interval 5 seconds
[ 42.962435] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.570008] udevd version 124 started
[ 52.256288] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.274058] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 52.534894] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 52.552772] ACPI: Power Button (FF) [PWRF]
[ 52.552893] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 52.584058] ACPI: Power Button (CM) [PWRB]
[ 52.584243] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 52.585909] ACPI: Lid Switch [LID]
[ 52.586059] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 52.605076] ACPI: Sleep Button (CM) [SLPB]
[ 52.606960] ACPI: AC Adapter [ACAD] (on-line)
[ 52.741758] ACPI: Battery Slot [BAT1] (battery present)
[ 52.892450] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 52.987024] ACPI: WMI: Mapper loaded
[ 53.285808] Yenta: CardBus bridge found at 0000:08:01.0 [1025:010f]
[ 53.285843] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 53.285845] Yenta: Routing CardBus interrupts to PCI
[ 53.285852] Yenta TI: socket 0000:08:01.0, mfunc 0x00001202, devctl 0x44
[ 53.434711] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 53.460867] [fglrx] Maximum main memory to use for locked dma buffers: 670 MBytes.
[ 53.460929] [fglrx] vendor: 1002 device: 5975 count: 1
[ 53.463367] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[ 53.463393] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 53.464503] [fglrx] PAT is enabled successfully!
[ 53.464554] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 53.501872] sdhci: Secure Digital Host Controller Interface driver
[ 53.501877] sdhci: Copyright(c) Pierre Ossman
[ 53.518375] Yenta: ISA IRQ mask 0x0cf8, PCI irq 23
[ 53.518384] Socket status: 30000006
[ 53.518387] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 53.518394] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 53.518683] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[ 53.518687] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 53.524381] sdhci-pci 0000:08:01.2: SDHCI controller found [1524:0550] (rev 1)
[ 53.524404] sdhci-pci 0000:08:01.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 53.524520] mmc0: SDHCI controller on PCI [0000:08:01.2] using PIO
[ 53.527541] sdhci-pci 0000:08:01.4: SDHCI controller found [1524:0551] (rev 1)
[ 53.527557] sdhci-pci 0000:08:01.4: enabling device (0000 -> 0002)
[ 53.527563] sdhci-pci 0000:08:01.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 53.527707] mmc1: SDHCI controller on PCI [0000:08:01.4] using PIO
[ 53.689819] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 53.847471] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 54.251410] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 54.294389] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 54.514576] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 54.536896] b43-phy0: Broadcom 4318 WLAN found
[ 54.601886] phy0: Selected rate control algorithm 'pid'
[ 54.691756] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 56.616323] lp: driver loaded but no devices found
[ 56.880673] Adding 2249060k swap on /dev/sda5. Priority:-1 extents:1 across:2249060k
[ 57.358681] EXT3 FS on sda1, internal journal
[ 57.961007] type=1505 audit(1226708337.635:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4504
[ 58.171928] type=1505 audit(1226708337.843:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4509
[ 58.172224] type=1505 audit(1226708337.847:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4509
[ 58.411199] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 59.913894] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00)
[ 59.913965] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 59.913970] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 60.994149] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 61.434290] ppdev: user-space parallel port driver
[ 63.216074] Clocksource tsc unstable (delta = -198022055 ns)
[ 68.308876] [fglrx] GART Table is not in FRAME_BUFFER range
[ 68.315012] [fglrx] CMM init INV FB MC:0x38000000, length:0x8000000
[ 68.315031] [fglrx] Reserved FB block: Shared offset:0, size:40000
[ 68.704616] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 68.816391] input: b43-phy0 as /devices/virtual/input/input9
[ 68.916085] firmware: requesting b43/ucode5.fw
[ 68.989851] firmware: requesting b43/pcm5.fw
[ 69.124253] firmware: requesting b43/b0g0initvals5.fw
[ 69.258554] firmware: requesting b43/b0g0bsinitvals5.fw
[ 69.508086] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 69.658765] Registered led device: b43-phy0::tx
[ 69.658889] Registered led device: b43-phy0::rx
[ 69.658944] Registered led device: b43-phy0::radio
[ 69.841139] b43-phy0: Radio hardware status changed to DISABLED
[ 69.887849] b43-phy0: Radio turned on by software
[ 69.887869] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on.
[ 69.922014] NET: Registered protocol family 17
[ 77.529026] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 101.731487] CPU0 attaching NULL sched-domain.
[ 101.731537] CPU1 attaching NULL sched-domain.
[ 101.740175] CPU0 attaching sched-domain:
[ 101.740191] domain 0: span 0-1 level CPU
[ 101.740197] groups: 0 1
[ 101.740207] domain 1: span 0-1 level NODE
[ 101.740215] groups: 0-1
[ 101.740223] CPU1 attaching sched-domain:
[ 101.740227] domain 0: span 0-1 level CPU
[ 101.740231] groups: 1 0
[ 101.740238] domain 1: span 0-1 level NODE
[ 101.740243] groups: 0-1
[ 175.702581] type=1503 audit(1226708456.696:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6370/net/" pid=6370 profile="/usr/sbin/cupsd"
[ 176.812446] type=1503 audit(1226708457.804:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6374/net/" pid=6374 profile="/usr/sbin/cupsd"
[ 176.944503] NET: Registered protocol family 10
[ 176.946226] lo: Disabled Privacy Extensions
[ 176.949335] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 176.950749] type=1503 audit(1226708457.943:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 176.951625] type=1503 audit(1226708457.943:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 176.952523] type=1503 audit(1226708457.947:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 176.953482] type=1503 audit(1226708457.947:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 176.958371] type=1503 audit(1226708457.951:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 176.958393] type=1503 audit(1226708457.951:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 176.958410] type=1503 audit(1226708457.951:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 176.958424] type=1503 audit(1226708457.951:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=6374 profile="/usr/sbin/cupsd"
[ 187.005048] eth0: no IPv6 routers present
colin@colin:~$

Revision history for this message
Niloc Deeps (ajarncolin) said :
#2

lshw -C network gives:
*-network:0
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 2
       bus info: pci@0000:08:02.0
       logical name: eth0
       version: 10
       serial: 00:16:36:90:ba:3c
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.34 latency=64 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s
  *-network:1
       description: Network controller
       product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 4
       bus info: pci@0000:08:04.0
       version: 02
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master
       configuration: driver=b43-pci-bridge latency=64 module=ssb
  *-network
       description: Wireless interface
       physical id: 1
       logical name: wlan0
       serial: 00:16:cf:9d:3c:09
       capabilities: ethernet physical wireless
       configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg

Revision history for this message
Niloc Deeps (ajarncolin) said :
#3

sudo iwconfig gives :
 IEEE 802.11bg ESSID:""
          Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
          Tx-Power=27 dBm
          Retry min limit:7 RTS thr:off Fragment thr=2352 B
          Encryption key:off
          Power Management:off
          Link Quality:0 Signal level:0 Noise level:0
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Revision history for this message
Niloc Deeps (ajarncolin) said :
#4

iwconfig -v gives:
iwconfig Wireless-Tools version 29
          Compatible with Wireless Extension v11 to v22.

Kernel Currently compiled with Wireless Extension v22.

wlan0 Recommend Wireless Extension v21 or later,
          Currently compiled with Wireless Extension v22.

Revision history for this message
marcobra (Marco Braida) (marcobra) said :
#5

Ubuntu 8.10 netwok manager and network manager applet

There are bugs marked "high" for networks-manager and network-manager-applets please see:

https://bugs.launchpad.net/ubuntu/+source/network-manager-applet/+bugs

https://bugs.launchpad.net/ubuntu/+source/network-manager-applet/+bug/289466

https://bugs.launchpad.net/ubuntu/+source/network-manager/+bugs

https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/279262

They are candidate to be solved in short time...

hope this helps

Can you help with this problem?

Provide an answer of your own, or ask Niloc Deeps for more information if necessary.

To post a message you must log in.