DVD gives: "Invalid mount option when attempting to mount the volume ..."

Asked by chunchengch

I have two data DVDs both were burned in Windows Vista, one is read by Ubuntu 7.04, while when I load the other one, an error message pops out:

cannot mount volume
Invalid mount option when attempting to mount the volume 'Backup2007-4-20'.

what can I do to read the DVD?

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu nautilus Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Jeff Martin (evilgourmet) said :
#1

Hello,

I would like to help you solve this problem, and I need a bit more information to help you out.
can you do a 'dmesg | tail ' after putting the DVD into your drive so I can see what is happening, and post it here?

- Jeff

Revision history for this message
chunchengch (chunchengch) said :
#2

Hi,

The DVD can be read now, but the name of files and directories display wrong characters instead of correct Chinese characters, such as "???-????-??.exe", thanks for your help.

chunchengch@paul:~$ dmesg | tail
[ 928.760000] ata2: port failed to respond (30 secs, Status 0xd0)
[ 928.760000] ata2: soft resetting port
[ 929.276000] ata2.00: configured for UDMA/33
[ 929.276000] ata2: EH complete
[ 931.376000] cdrom: sr0: mrw address space DMA selected
[ 931.376000] cdrom open: mrw_status 'not mrw'
[ 931.420000] cdrom: sr0: mrw address space DMA selected
[ 931.424000] cdrom open: mrw_status 'not mrw'
[ 931.476000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 931.476000] ISOFS: changing to secondary root
chunchengch@paul:~$

Revision history for this message
Jeff Martin (evilgourmet) said :
#3

Glad the drive is working, it may be a ACPI problem causing it to not read right off . Disabling ACPI from GRUB is an option ; 'acpi=off' when booting.

The display of the correct Chinese characters for the files... Do you have the Chinese language packs installed on your system? If not get them from 'apt-get install language-support-zh*' (for example) .

Glad to help,

Jeff

Revision history for this message
chunchengch (chunchengch) said :
#4

I do have installed the Chinese language packs, I can read and write in Chinese well except the problem when reading data DVD.

If I disable ACPI, will I also disable hotkey of my laptop or any other functions?

Revision history for this message
Jeff Martin (evilgourmet) said :
#5

 Chunchengch,

Using the 'acpi=off' at boot is a temporary option, if it works then you can add it to your grub config file.
Otherwise the next time you boot it will boot normally.

- Jeff

Revision history for this message
Michal Pěnka (michal-penka) said :
#6

Hello,

I have this problem too. I instert a Futurama DVD into my nc6400 laptop's dvd rom and gnome tells me "cannot mount volume". Here's my dmesg.

Revision history for this message
Michal Pěnka (michal-penka) said :
#7

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed May 23 01:46:23 UTC 2007 (Ubuntu 2.6.20-16.28-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fed0000 end: 000000003ffd0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffd0000 size: 0000000000015600 end: 000000003ffe5600 type: 2
[ 0.000000] copy_e820_map() start: 000000003ffe5600 size: 0000000000012a00 end: 000000003fff8000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 000000000007b000 end: 00000000fed9b000 type: 2
[ 0.000000] copy_e820_map() start: 00000000feda0000 size: 0000000000020000 end: 00000000fedc0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000100000 end: 00000000ffc00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffe5600 (reserved)
[ 0.000000] BIOS-e820: 000000003ffe5600 - 000000003fff8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262096
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262096
[ 0.000000] On node 0 totalpages: 262096
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32465 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v002 HP ) @ 0x000f7850
[ 0.000000] ACPI: XSDT (v001 HPQOEM SLIC-MPC 0x00000001 HP 0x00000001) @ 0x3ffe57c8
[ 0.000000] ACPI: FADT (v004 HP 30AC 0x00000003 HP 0x00000001) @ 0x3ffe5684
[ 0.000000] ACPI: SLIC (v001 HPQOEM SLIC-MPC 0x00000001 HP 0x00000001) @ 0x3ffe5844
[ 0.000000] ACPI: HPET (v001 HP 30AC 0x00000001 HP 0x00000001) @ 0x3ffe59bc
[ 0.000000] ACPI: MADT (v001 HP 30AC 0x00000001 HP 0x00000001) @ 0x3ffe59f4
[ 0.000000] ACPI: MCFG (v001 HP 30AC 0x00000001 HP 0x00000001) @ 0x3ffe5a5c
[ 0.000000] ACPI: TCPA (v002 HP 30AC 0x00000001 HP 0x00000001) @ 0x3ffe5a98
[ 0.000000] ACPI: SSDT (v001 HP HPQNLP 0x00000001 MSFT 0x0100000e) @ 0x3fff5f9f
[ 0.000000] ACPI: SSDT (v001 HP HPQPAT 0x00000001 MSFT 0x0100000e) @ 0x3fff5ff8
[ 0.000000] ACPI: SSDT (v001 HP Cpu0Tst 0x00003000 INTL 0x20060317) @ 0x3fff6b7e
[ 0.000000] ACPI: SSDT (v001 HP Cpu1Tst 0x00003000 INTL 0x20060317) @ 0x3fff6ddd
[ 0.000000] ACPI: SSDT (v001 HP CpuPm 0x00003000 INTL 0x20060317) @ 0x3fff6e83
[ 0.000000] ACPI: DSDT (v001 HP nc6400 0x00010000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 1995.200 MHz processor.
[ 40.901583] Built 1 zonelists. Total pages: 260049
[ 40.901587] Kernel command line: root=UUID=51182fa0-cdaa-47c0-a02b-42b0c2fc3193 ro quiet splash
[ 40.901707] mapped APIC to ffffd000 (fee00000)
[ 40.901709] mapped IOAPIC to ffffc000 (fec00000)
[ 40.901712] Enabling fast FPU save and restore... done.
[ 40.901714] Enabling unmasked SIMD FPU exception support... done.
[ 40.901720] Initializing CPU#0
[ 40.901791] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 40.904346] Console: colour VGA+ 80x25
[ 40.904613] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 40.904878] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 40.926066] Memory: 1028196k/1048384k available (1992k kernel code, 19508k reserved, 896k data, 328k init, 130880k highmem)
[ 40.926074] virtual kernel memory layout:
[ 40.926074] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 40.926075] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 40.926076] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 40.926077] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 40.926078] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 40.926079] .data : 0xc02f2354 - 0xc03d26d4 ( 896 kB)
[ 40.926080] .text : 0xc0100000 - 0xc02f2354 (1992 kB)
[ 40.926083] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 40.926232] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 40.926237] hpet0: 3 64-bit timers, 14318180 Hz
[ 40.927242] Using HPET for base-timer
[ 41.006192] Calibrating delay using timer specific routine.. 3994.39 BogoMIPS (lpj=7988780)
[ 41.006225] Security Framework v1.0.0 initialized
[ 41.006229] SELinux: Disabled at boot.
[ 41.006241] Mount-cache hash table entries: 512
[ 41.006347] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 41.006353] monitor/mwait feature present.
[ 41.006355] using mwait in idle threads.
[ 41.006358] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 41.006360] CPU: L2 cache: 4096K
[ 41.006362] CPU: Physical Processor ID: 0
[ 41.006363] CPU: Processor Core ID: 0
[ 41.006364] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 41.006372] Compat vDSO mapped to ffffe000.
[ 41.006375] Remapping vsyscall page to ffffe000
[ 41.006384] Checking 'hlt' instruction... OK.
[ 41.022261] SMP alternatives: switching to UP code
[ 41.022539] Early unpacking initramfs... done
[ 41.289899] ACPI: Core revision 20060707
[ 41.290528] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 41.365567] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 41.365584] SMP alternatives: switching to SMP code
[ 41.365654] Booting processor 1/1 eip 3000
[ 41.376249] Initializing CPU#1
[ 41.453945] Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=7980151)
[ 41.453951] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 41.453955] monitor/mwait feature present.
[ 41.453957] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 41.453959] CPU: L2 cache: 4096K
[ 41.453961] CPU: Physical Processor ID: 0
[ 41.453962] CPU: Processor Core ID: 1
[ 41.453963] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 41.454577] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 41.454597] Total of 2 processors activated (7984.46 BogoMIPS).
[ 41.454793] ENABLING IO-APIC IRQs
[ 41.454988] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 41.601862] checking TSC synchronization across 2 CPUs: passed.
[ 0.004000] Brought up 2 CPUs
[ 0.254825] migration_cost=41
[ 0.255057] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.255059] Booting paravirtualized kernel on bare hardware
[ 0.255152] Time: 20:42:12 Date: 04/31/107
[ 0.255177] NET: Registered protocol family 16
[ 0.255247] EISA bus registered
[ 0.255253] ACPI: bus type pci registered
[ 0.256477] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[ 0.256478] PCI: Using configuration type 1
[ 0.256480] Setting up standard PCI resources
[ 0.311028] ACPI: Interpreter enabled
[ 0.311031] ACPI: Using IOAPIC for interrupt routing
[ 0.311373] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.311378] PCI: Probing PCI hardware (bus 00)
[ 0.311395] ACPI: Assume root bridge [\_SB_.C003] bus is 0
[ 0.314769] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.314773] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.314963] Boot video device is 0000:01:00.0
[ 0.316273] PCI: Transparent bridge - 0000:00:1e.0
[ 0.316344] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
[ 0.316347] Please report the result to linux-kernel to fix this permanently
[ 0.316420] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.343666] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C084._PRT]
[ 0.344073] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C099._PRT]
[ 0.359361] ACPI: Power Resource [C1F5] (on)
[ 0.360423] ACPI: Power Resource [C1FC] (on)
[ 0.361383] ACPI: Power Resource [C219] (on)
[ 0.363662] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C102._PRT]
[ 0.364166] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C112._PRT]
[ 0.364662] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C118._PRT]
[ 0.365360] ACPI: Power Resource [C221] (on)
[ 0.365710] ACPI: PCI Interrupt Link [C10E] (IRQs *10 11)
[ 0.366149] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
[ 0.366587] ACPI: PCI Interrupt Link [C110] (IRQs 10 *11)
[ 0.367026] ACPI: PCI Interrupt Link [C111] (IRQs 10 11) *5
[ 0.367463] ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
[ 0.367902] ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
[ 0.368339] ACPI: PCI Interrupt Link [C126] (IRQs 10 *11)
[ 0.368661] ACPI Exception (pci_link-0180): AE_NOT_FOUND, Evaluating _PRS [20060707]
[ 0.370406] ACPI: Power Resource [C32A] (off)
[ 0.370539] ACPI: Power Resource [C32B] (off)
[ 0.370669] ACPI: Power Resource [C32C] (off)
[ 0.370798] ACPI: Power Resource [C32D] (off)
[ 0.370931] ACPI: Power Resource [C32E] (off)
[ 0.371061] ACPI: Power Resource [C32F] (off)
[ 0.371191] ACPI: Power Resource [C330] (off)
[ 0.371321] ACPI: Power Resource [C331] (off)
[ 0.371452] ACPI: Power Resource [C332] (off)
[ 0.371581] ACPI: Power Resource [C333] (off)
[ 0.371654] ACPI: Power Resource [C334] (off)
[ 0.372257] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.372264] pnp: PnP ACPI init
[ 0.381682] pnp: PnP ACPI: found 16 devices
[ 0.381685] PnPBIOS: Disabled by ACPI PNP
[ 0.381723] PCI: Using ACPI for IRQ routing
[ 0.381725] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.497122] NET: Registered protocol family 8
[ 0.497124] NET: Registered protocol family 20
[ 0.498422] pnp: 00:0e: ioport range 0x4d0-0x4d1 has been reserved
[ 0.498424] pnp: 00:0e: ioport range 0x1000-0x107f could not be reserved
[ 0.498427] pnp: 00:0e: ioport range 0x1100-0x113f has been reserved
[ 0.498429] pnp: 00:0e: ioport range 0x1200-0x121f has been reserved
[ 0.498684] PCI: Bridge: 0000:00:01.0
[ 0.498686] IO window: 4000-4fff
[ 0.498690] MEM window: e0600000-e06fffff
[ 0.498693] PREFETCH window: d8000000-dbffffff
[ 0.498696] PCI: Bridge: 0000:00:1c.0
[ 0.498697] IO window: disabled.
[ 0.498703] MEM window: e0100000-e01fffff
[ 0.498707] PREFETCH window: disabled.
[ 0.498712] PCI: Bridge: 0000:00:1c.1
[ 0.498713] IO window: disabled.
[ 0.498719] MEM window: e0000000-e00fffff
[ 0.498723] PREFETCH window: disabled.
[ 0.498728] PCI: Bridge: 0000:00:1c.3
[ 0.498731] IO window: 2000-3fff
[ 0.498737] MEM window: dc000000-dfffffff
[ 0.498741] PREFETCH window: disabled.
[ 0.498748] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 0.498750] IO window: 00006000-000060ff
[ 0.498755] IO window: 00006400-000064ff
[ 0.498760] PREFETCH window: 50000000-53ffffff
[ 0.498766] MEM window: 54000000-57ffffff
[ 0.498771] PCI: Bridge: 0000:00:1e.0
[ 0.498774] IO window: 6000-6fff
[ 0.498780] MEM window: e0200000-e05fffff
[ 0.498784] PREFETCH window: 50000000-53ffffff
[ 0.498798] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.498803] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.498825] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.498830] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.498853] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.498858] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.498881] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 0.498886] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.498899] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.498917] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 0.498945] NET: Registered protocol family 2
[ 0.543731] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.543818] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.544221] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.544422] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.544424] TCP reno registered
[ 0.559777] checking if image is initramfs... it is
[ 1.086019] Freeing initrd memory: 6786k freed
[ 1.086616] audit: initializing netlink socket (disabled)
[ 1.086633] audit(1180644132.772:1): initialized
[ 1.086724] highmem bounce pool size: 64 pages
[ 1.086801] VFS: Disk quotas dquot_6.5.1
[ 1.086819] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.086868] io scheduler noop registered
[ 1.086870] io scheduler anticipatory registered
[ 1.086872] io scheduler deadline registered
[ 1.086882] io scheduler cfq registered (default)
[ 1.087106] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.087140] assign_interrupt_mode Found MSI capability
[ 1.087142] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.087223] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.087279] assign_interrupt_mode Found MSI capability
[ 1.087281] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.087313] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.087440] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.087495] assign_interrupt_mode Found MSI capability
[ 1.087497] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.087525] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.087638] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.087694] assign_interrupt_mode Found MSI capability
[ 1.087696] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.087722] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.087887] isapnp: Scanning for PnP cards...
[ 1.442437] isapnp: No Plug & Play device found
[ 1.459474] Real Time Clock Driver v1.12ac
[ 1.459692] hpet_resources: 0xfed00000 is busy
[ 1.459729] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.459992] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 1.460458] mice: PS/2 mouse device common for all mice
[ 1.460930] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.461059] input: Macintosh mouse button emulation as /class/input/input0
[ 1.461090] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.461093] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.461377] PNP: PS/2 Controller [PNP0303:C216,PNP0f13:C217] at 0x60,0x64 irq 1,12
[ 1.463198] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.463952] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.463955] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.463958] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.463960] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.463962] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.464049] EISA: Probing bus 0 at eisa.0
[ 1.464056] Cannot allocate resource for EISA slot 1
[ 1.464057] Cannot allocate resource for EISA slot 2
[ 1.464059] Cannot allocate resource for EISA slot 3
[ 1.464061] Cannot allocate resource for EISA slot 4
[ 1.464063] Cannot allocate resource for EISA slot 5
[ 1.464065] Cannot allocate resource for EISA slot 6
[ 1.464075] EISA: Detected 0 cards.
[ 1.485603] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.494141] TCP cubic registered
[ 1.494148] NET: Registered protocol family 1
[ 1.494168] Starting balanced_irq
[ 1.494175] Using IPI No-Shortcut mode
[ 1.494254] ACPI: (supports S0 S3 S4 S5)
[ 1.494291] Magic number: 7:131:752
[ 1.494294] hash matches device ttyS3
[ 1.494509] Freeing unused kernel memory: 328k freed
[ 1.495181] Time: tsc clocksource has been installed.
[ 2.679755] Capability LSM initialized
[ 2.707309] ACPI: Transitioning device [C335] to D3
[ 2.707312] ACPI: Transitioning device [C335] to D3
[ 2.707314] ACPI: Fan [C335] (off)
[ 2.707512] ACPI: Transitioning device [C336] to D3
[ 2.707514] ACPI: Transitioning device [C336] to D3
[ 2.707516] ACPI: Fan [C336] (off)
[ 2.707712] ACPI: Transitioning device [C337] to D3
[ 2.707713] ACPI: Transitioning device [C337] to D3
[ 2.707716] ACPI: Fan [C337] (off)
[ 2.707911] ACPI: Transitioning device [C338] to D3
[ 2.707913] ACPI: Transitioning device [C338] to D3
[ 2.707916] ACPI: Fan [C338] (off)
[ 2.708112] ACPI: Transitioning device [C339] to D3
[ 2.708114] ACPI: Transitioning device [C339] to D3
[ 2.708116] ACPI: Fan [C339] (off)
[ 2.708310] ACPI: Transitioning device [C33A] to D3
[ 2.708312] ACPI: Transitioning device [C33A] to D3
[ 2.708314] ACPI: Fan [C33A] (off)
[ 2.708509] ACPI: Transitioning device [C33B] to D3
[ 2.708511] ACPI: Transitioning device [C33B] to D3
[ 2.708513] ACPI: Fan [C33B] (off)
[ 2.708707] ACPI: Transitioning device [C33C] to D3
[ 2.708709] ACPI: Transitioning device [C33C] to D3
[ 2.708712] ACPI: Fan [C33C] (off)
[ 2.708907] ACPI: Transitioning device [C33D] to D3
[ 2.708909] ACPI: Transitioning device [C33D] to D3
[ 2.708911] ACPI: Fan [C33D] (off)
[ 2.709106] ACPI: Transitioning device [C33E] to D3
[ 2.709107] ACPI: Transitioning device [C33E] to D3
[ 2.709110] ACPI: Fan [C33E] (off)
[ 2.709187] ACPI: Transitioning device [C33F] to D3
[ 2.709188] ACPI: Transitioning device [C33F] to D3
[ 2.709190] ACPI: Fan [C33F] (off)
[ 2.712115] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu0Ist] [20060707]
[ 2.712336] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu0Cst] [20060707]
[ 2.716083] Monitor-Mwait will be used to enter C-1 state
[ 2.716085] Monitor-Mwait will be used to enter C-2 state
[ 2.716089] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.716092] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.716488] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu1Ist] [20060707]
[ 2.716677] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP ] OemTableId [ Cpu1Cst] [20060707]
[ 2.717201] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.717205] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.236000] Time: hpet clocksource has been installed.
[ 3.268000] ACPI: Thermal Zone [TZ0] (55 C)
[ 3.284000] ACPI: Thermal Zone [TZ1] (54 C)
[ 3.300000] ACPI: Thermal Zone [TZ2] (51 C)
[ 3.312000] ACPI: Thermal Zone [TZ3] (43 C)
[ 3.324000] ACPI: Thermal Zone [TZ4] (34 C)
[ 3.328000] ACPI: Thermal Zone [TZ5] (42 C)
[ 3.684000] usbcore: registered new interface driver usbfs
[ 3.684000] usbcore: registered new interface driver hub
[ 3.684000] usbcore: registered new device driver usb
[ 3.684000] USB Universal Host Controller Interface driver v3.0
[ 3.684000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.684000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.684000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.684000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.684000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000
[ 3.684000] usb usb1: configuration #1 chosen from 1 choice
[ 3.684000] hub 1-0:1.0: USB hub found
[ 3.684000] hub 1-0:1.0: 2 ports detected
[ 3.788000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21
[ 3.788000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.788000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.788000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.788000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005020
[ 3.788000] usb usb2: configuration #1 chosen from 1 choice
[ 3.788000] hub 2-0:1.0: USB hub found
[ 3.788000] hub 2-0:1.0: 2 ports detected
[ 3.892000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 3.892000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.892000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.892000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.892000] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00005040
[ 3.892000] usb usb3: configuration #1 chosen from 1 choice
[ 3.892000] hub 3-0:1.0: USB hub found
[ 3.892000] hub 3-0:1.0: 2 ports detected
[ 3.996000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 3.996000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.996000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.996000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.996000] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005060
[ 3.996000] usb usb4: configuration #1 chosen from 1 choice
[ 3.996000] hub 4-0:1.0: USB hub found
[ 3.996000] hub 4-0:1.0: 2 ports detected
[ 4.028000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 4.104000] tg3.c:v3.72 (January 8, 2007)
[ 4.104000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.104000] PCI: Setting latency timer of device 0000:08:00.0 to 64
[ 4.108000] SCSI subsystem initialized
[ 4.112000] libata version 2.20 loaded.
[ 4.152000] eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:4a:b0:58
[ 4.152000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 4.152000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.152000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 4.152000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.152000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 22
[ 4.152000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.152000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00015080 irq 14
[ 4.152000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00015088 irq 15
[ 4.152000] scsi0 : ata_piix
[ 4.196000] usb 1-1: configuration #1 chosen from 1 choice
[ 4.316000] ata1.00: ATA-7: FUJITSU MHV2080BH PL, 892C, max UDMA/100
[ 4.316000] ata1.00: 156301488 sectors, multi 16: LBA48
[ 4.324000] ata1.00: configured for UDMA/100
[ 4.324000] scsi1 : ata_piix
[ 4.440000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 4.608000] usb 2-1: configuration #1 chosen from 1 choice
[ 4.644000] ata2.00: ATAPI, max MWDMA2
[ 4.812000] ata2.00: configured for MWDMA2
[ 4.812000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
[ 4.812000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842S 1.01 PQ: 0 ANSI: 5
[ 4.816000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 4.816000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.816000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.816000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.816000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.816000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.816000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0704000
[ 4.820000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.820000] usb usb5: configuration #1 chosen from 1 choice
[ 4.820000] hub 5-0:1.0: USB hub found
[ 4.820000] hub 5-0:1.0: 8 ports detected
[ 4.828000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.828000] sda: Write Protect is off
[ 4.828000] sda: Mode Sense: 00 3a 00 00
[ 4.828000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.828000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.828000] sda: Write Protect is off
[ 4.828000] sda: Mode Sense: 00 3a 00 00
[ 4.828000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.828000] sda: sda1 sda2 sda3 sda4
[ 4.864000] sd 0:0:0:0: Attached scsi disk sda
[ 4.864000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.864000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.868000] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.868000] Uniform CD-ROM driver Revision: 3.20
[ 4.868000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.900000] usb 2-1: USB disconnect, address 2
[ 5.188000] Attempting manual resume
[ 5.188000] swsusp: Resume From Partition 8:3
[ 5.188000] PM: Checking swsusp image.
[ 5.188000] PM: Resume from disk failed.
[ 5.228000] kjournald starting. Commit interval 5 seconds
[ 5.228000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.400000] usb 1-1: USB disconnect, address 2
[ 5.640000] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 5.816000] usb 1-1: configuration #1 chosen from 1 choice
[ 6.060000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 6.232000] usb 2-1: configuration #1 chosen from 1 choice
[ 16.884000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.936000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.952000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.960000] agpgart: Detected an Intel 945GM Chipset.
[ 17.064000] agpgart: AGP aperture is 256M @ 0x0
[ 17.196000] input: PC Speaker as /class/input/input2
[ 17.232000] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30ac]
[ 17.232000] Yenta: Enabling burst memory read transactions
[ 17.232000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 17.232000] Yenta: Routing CardBus interrupts to PCI
[ 17.232000] Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
[ 17.256000] synaptics reset failed
[ 17.264000] synaptics reset failed
[ 17.268000] synaptics reset failed
[ 17.344000] intel_rng: FWH not detected
[ 17.352000] ieee80211_crypt: registered algorithm 'NULL'
[ 17.352000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 17.352000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 17.440000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
[ 17.440000] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 17.444000] sdhci: Secure Digital Host Controller Interface driver
[ 17.444000] sdhci: Copyright(c) Pierre Ossman
[ 17.468000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
[ 17.468000] Socket status: 30000006
[ 17.468000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 17.468000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 17.468000] cs: IO port probe 0x6000-0x6fff: clean.
[ 17.468000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe05fffff
[ 17.468000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 17.468000] sdhci: SDHCI controller found at 0000:02:06.3 [104c:803c] (rev 0)
[ 17.468000] ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 21
[ 17.468000] mmc0: SDHCI at 0xe0202000 irq 21 PIO
[ 17.468000] ACPI: PCI Interrupt 0000:02:06.2[A] -> GSI 18 (level, low) -> IRQ 19
[ 17.472000] irda_init()
[ 17.472000] NET: Registered protocol family 23
[ 17.488000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 17.504000] tifm_core: MMC/SD card detected in socket 0:1
[ 17.536000] parport: PnPBIOS parport detected.
[ 17.536000] parport0: PC-style at 0x378 (0x778), irq 0, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 17.536000] IRQ handler type mismatch for IRQ 0
[ 17.536000] current handler: timer
[ 17.536000] [<c015410e>] setup_irq+0x12e/0x1e0
[ 17.536000] [<f8a75c10>] parport_pc_interrupt+0x0/0x50 [parport_pc]
[ 17.536000] [<c0154263>] request_irq+0xa3/0xc0
[ 17.536000] [<f8a751f6>] parport_pc_probe_port+0x606/0xf30 [parport_pc]
[ 17.536000] [<f8a75bd4>] parport_pc_pnp_probe+0xb4/0xf0 [parport_pc]
[ 17.536000] [<c022ad8f>] pnp_device_probe+0x4f/0xb0
[ 17.536000] [<c0257a86>] really_probe+0x66/0x190
[ 17.536000] [<c0257bf9>] driver_probe_device+0x49/0xc0
[ 17.536000] [<c0257dce>] __driver_attach+0x9e/0xa0
[ 17.536000] [<c0256f5b>] bus_for_each_dev+0x3b/0x60
[ 17.536000] [<c0257924>] driver_attach+0x24/0x30
[ 17.536000] [<c0257d30>] __driver_attach+0x0/0xa0
[ 17.536000] [<c02572eb>] bus_add_driver+0x7b/0x1a0
[ 17.536000] [<f8a464c7>] parport_pc_init+0x387/0x39e [parport_pc]
[ 17.536000] [<c014422d>] sys_init_module+0x15d/0x1ba0
[ 17.536000] [<c0107a5d>] sys_mmap2+0xcd/0xd0
[ 17.536000] [<c01031f0>] sysenter_past_esp+0x69/0xa9
[ 17.536000] =======================
[ 17.536000] parport0: irq 0 in use, resorting to polled operation
[ 17.564000] Bluetooth: Core ver 2.11
[ 17.564000] NET: Registered protocol family 31
[ 17.564000] Bluetooth: HCI device and connection manager initialized
[ 17.564000] Bluetooth: HCI socket layer initialized
[ 17.636000] tpm_inf_pnp 00:04: Found C1FE with ID IFX0102
[ 17.636000] tpm_inf_pnp 00:04: TPM found: config base 0x560, io base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 17.672000] Bluetooth: HCI USB driver ver 2.9
[ 17.708000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[ 17.708000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 17.708000] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 17.708000] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 17.732000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 17.764000] usbcore: registered new interface driver hci_usb
[ 17.832000] iTCO_vendor_support: vendor-support=0
[ 17.880000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 17.880000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 17.880000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.020000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.020000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 18.148000] cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[ 18.152000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 18.152000] cs: IO port probe 0x820-0x8ff: clean.
[ 18.152000] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.152000] cs: IO port probe 0xa00-0xaff: clean.
[ 18.572000] lp0: using parport0 (polling).
[ 18.648000] fuse init (API version 7.8)
[ 18.676000] tun: Universal TUN/TAP device driver, 1.6
[ 18.676000] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 18.700000] Adding 1084376k swap on /dev/disk/by-uuid/363a408a-89f8-4e60-a177-ec9087e8ccbb. Priority:-1 extents:1 across:1084376k
[ 18.888000] EXT3 FS on sda4, internal journal
[ 19.680000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 22.024000] input: PS/2 Generic Mouse as /class/input/input4
[ 22.832000] Using specific hotkey driver
[ 22.880000] ACPI: AC Adapter [C1B8] (on-line)
[ 22.908000] ACPI: Video Device [C12F] (multi-head: yes rom: no post: no)
[ 22.924000] input: Power Button (FF) as /class/input/input5
[ 22.924000] ACPI: Power Button (FF) [PWRF]
[ 22.924000] input: Sleep Button (CM) as /class/input/input6
[ 22.924000] ACPI: Sleep Button (CM) [C242]
[ 22.924000] input: Lid Switch as /class/input/input7
[ 22.924000] ACPI: Lid Switch [C23A]
[ 23.004000] No dock devices found.
[ 23.040000] ACPI: Battery Slot [C1BA] (battery present)
[ 23.040000] ACPI: Battery Slot [C1B9] (battery absent)
[ 23.084000] ibm_acpi: ec object not found
[ 23.128000] wmi_add device=c19b2800
[ 23.128000] calling WQBA
[ 23.152000] pcc_acpi: loading...
[ 28.740000] NET: Registered protocol family 10
[ 28.740000] lo: Disabled Privacy Extensions
[ 28.740000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.740000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 29.940000] ppdev: user-space parallel port driver
[ 30.928000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 30.928000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[ 30.928000] [fglrx] module loaded - fglrx 8.36.5 [Apr 17 2007] on minor 0
[ 30.964000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.076000] apm: BIOS not found.
[ 32.072000] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 32.160000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 32.160000] NFSD: starting 90-second grace period
[ 32.792000] [fglrx] total GART = 130023424
[ 32.792000] [fglrx] free GART = 114032640
[ 32.792000] [fglrx] max single GART = 114032640
[ 32.792000] [fglrx] total LFB = 66977792
[ 32.792000] [fglrx] free LFB = 48762880
[ 32.792000] [fglrx] max single LFB = 48762880
[ 32.792000] [fglrx] total Inv = 0
[ 32.792000] [fglrx] free Inv = 0
[ 32.792000] [fglrx] max single Inv = 0
[ 32.792000] [fglrx] total TIM = 0
[ 34.768000] Bluetooth: L2CAP ver 2.8
[ 34.768000] Bluetooth: L2CAP socket layer initialized
[ 34.940000] Bluetooth: RFCOMM socket layer initialized
[ 34.940000] Bluetooth: RFCOMM TTY layer initialized
[ 34.940000] Bluetooth: RFCOMM ver 1.8
[ 57.912000] hfs: unable to find HFS+ superblock
[ 67.032000] NET: Registered protocol family 17
[ 67.060000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 67.344000] ieee80211_crypt: registered algorithm 'CCMP'
[ 67.684000] ieee80211_crypt: registered algorithm 'TKIP'
[ 84.100000] eth1: no IPv6 routers present
[ 86.956000] tifm0 : demand removing card from socket 0:1
[ 88.564000] tifm_core: MMC/SD card detected in socket 0:1
[ 1429.236000] tifm0 : demand removing card from socket 0:1
[ 1430.276000] tifm_core: MMC/SD card detected in socket 0:1
[ 1430.336000] tifm0 : demand removing card from socket 0:1
[ 1431.396000] tifm_core: MMC/SD card detected in socket 0:1
[ 1796.520000] hfs: unable to find HFS+ superblock
[ 2038.840000] hfs: unable to find HFS+ superblock

Can you help with this problem?

Provide an answer of your own, or ask chunchengch for more information if necessary.

To post a message you must log in.