Replacing line 79
Hauppauge HVR-1100;hauppauge;lirc_dev lirc_i2c;hw_default;hauppauge/lircd.conf.hauppauge;
with
Hauppauge HVR-1100;devinput;none;hw_devinput;hauppauge/lircd.conf.hauppauge;
When asked:
Many remotes that were previously supported by the lirc_gpio interface │
│ now need to be set up via the dev/input interface. You will need to │
│ custom select your remote's event character device. This can be │
│ determined by 'cat /proc/bus/input/devices'. │
│ │
│ Select your custom event interface for your dev/input device: │
│ │
│ /dev/lirc0 ↑ │
│ /dev/input/by-path/pci-0000:04:01.2--event-ir ▮ │
│ /dev/input/by-path/platform-i8042-serio-0-event-kbd ▒ │
│ /dev/input/by-path/platform-i8042-serio-1-event-mouse ▒ │
│ /dev/input/by-path/platform-i8042-serio-1-mouse ▒ │
│ /dev/input/by-path/platform-pcspkr-event-spkr ▒ │
│ /dev/input/event0
It should work doing that :
Replacing line 79 hauppauge; lirc_dev lirc_i2c; hw_default; hauppauge/ lircd.conf. hauppauge; devinput; none;hw_ devinput; hauppauge/ lircd.conf. hauppauge;
Hauppauge HVR-1100;
with
Hauppauge HVR-1100;
When asked:
Many remotes that were previously supported by the lirc_gpio interface │ input/devices' . │ by-path/ pci-0000: 04:01.2- -event- ir ▮ │ by-path/ platform- i8042-serio- 0-event- kbd ▒ │ by-path/ platform- i8042-serio- 1-event- mouse ▒ │ by-path/ platform- i8042-serio- 1-mouse ▒ │ by-path/ platform- pcspkr- event-spkr ▒ │
│ now need to be set up via the dev/input interface. You will need to │
│ custom select your remote's event character device. This can be │
│ determined by 'cat /proc/bus/
│ │
│ Select your custom event interface for your dev/input device: │
│ │
│ /dev/lirc0 ↑ │
│ /dev/input/
│ /dev/input/
│ /dev/input/
│ /dev/input/
│ /dev/input/
│ /dev/input/event0
You have to choose :
/dev/ input/by- path/pci- 0000:04: 01.2--event- ir