Laptop Overheating in Ubuntu 12.04

What make and model laptop???

it is a dell laptop... ?
https://answers.launchpad.net/ubuntu/+source/linux/+question/195880

Check your bios settings(if the setting is present ) that the fan control is set to maximum. Otherwise it might be a good idea to go here: http://manpages.ubuntu.com/manpages/hardy/man8/fancontrol.8.html
while it is old there is a good chance it will work. Do you even hear the fan spinning up?

Hi. It's an HP G62 laptop: 3GB RAM, Intel i3 processor, Radeon HD 6300 Series GPU. The fan is always running at maximum when I'm in Ubuntu. It spins until the laptop gets hot then switches off. There's never a moment when it does not spin.

Have you tried cleaning the vents and heatsink with compressed air-- also if you can you install the drivers for the gpu to see if that would help. Can you also please comment whether the cpu usage is high all the time or is it just the fan spinning up??

Can you also run the following:

sudo apt-get lm-sensors

the above will install a temperature monitoring package
then type:

sensors

--this will get details of system temperature

Thanks

I've got a vaio laptop and I got many overheating problems with 12.04 especially when running flash videos

same problem of overheating Sony Vaio VPCEB1S1E
intel i5
ati radeon
Adapter: Virtual device
temp1: +67.0 ° C (crit = +103.0 ° C)
temp2: +67.0 ° C (crit = +103.0 ° C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +64.0 ° C (high = +95.0 ° C, crit = +105.0 ° C)
Core 2: +68.0 ° C (high = +95.0 ° C, crit = +105.0 ° C)

I have same problem

Samsung 300V5a
intel i7
Gforce 1G
temp: +63.0 ° C

Yeah that dual gpu nonesense causes a tonne of issues in Linux. It is best avoided.

This overheating issue seems to be very widespread in most Linux distros I've tried, & I've tried A LOT of distros: Ubuntu, Mint, OpenSuse, Fedora, Debian, Knoppix, Mageia, PCLinuxOS, Mepis, Pinguy, CentOS, Peppermint, Sabayon & list goes on. From this list Sabayon was the best as it would heat up but then cool down quickly.

However, I'm currently using Chakra Linux. It doesn't give me any heat problems whatsoever, the CPU temp is very low & my battery life is much longer now. This has brought up the question "why is my laptop overheating in Ubuntu & other distros but not in Chakra?"

Before I started using Chakra some people said I should try using Xfce, LXDE, OpenBox or a very lightweight desktop environment as KDE & GNOME might be causing the issue since they are resource-intensive. But Chakra is a pure KDE distro yet it causes no heating issues on my laptop. I hope this issue will be resolved on other distros soon (especially Ubuntu). <sigh>

Mint, PCLinuxOS, Pinguy and Peppermint are all Ubuntu based so will have the exact same kernel and drivers, therefore testing them is fairly worthless as you are pretty much just testing Ubuntu.

is overheating with Ubuntu, Fedora, Linuxmint, Archlinux
suspect is a bug in the kernel (I updated and new kernel 3.4.0-3-generc) .....the same.

I have been using Chrunchbang Statler for last 5 months and it has not given me overheating problem. I am quite happy with it. But at the same time new testing version of Crunchbang Waldorf which has overheating problem. So anyone who want to try lightweight openbox based distro, I would certainly recommend Chrunchbang Statler based on debian squeeze.

Samsung Series 9, Ubuntu 12.04. CPU heating up on videos and streaming. Battery also lasts shorter and doesn't show the correct state. Hope this issue is given enough attention as it seems to span across a lot of laptops.

Hi,
Am exactly having the same issue described.
Ubuntu 11.10 started to overheat (it was working fine for a long time) then I installed a fresh 12.04 installation to begin suffering the same issue.
my laptop is Sony vaio vpccw21fd

my windows machine works fine

I have a hunch
who can confirm me if anyone has problems with Gentoo
Chakra is derived from gentoo!!

Hello,
I can confirm now that this is not a bug
I cleaned my fan heater, and everything went smooth
when heater wasn't OK, any load on cpu causes cpu usage to jump very high

Go to the manufacture of your computer/laptop model, check to see if there are updates for the Bios for your model. (if you built it yourself you may need to go the motherboard's manufacturer site and check for BIOS update. Get the latest update if it is available. More often than not, there will be an .exe file you can use that will flash/update your Bios for you. They may have one that will do it from Dos and one that will do it from Windows. I used the one for Windows. Follow the instructions. If your computer does not restart for you after Bios update, restart your computer. Check your Bios to see if you now have the latest Bios update for your computer. When I did this my computer had a senior moment at first. While using an alternative OS the fan would start then stop, start then stop, start then stop, then it worked normally even though I used Slax, Ubuntu (all version) and Slacko. Now I can use any OS I want to as long as I have the proper system req. No more overheating problems. *Warning: Be careful. Do not flash the wrong Bios update for you computer/motherboard or your computer will be rendered useless.*

This is not BIOS, this is power mode setting problem of the graphics card.
This seems to help for me with radeon open source driver:
http://forums.fedoraforum.org/showthread.php?t=281629

So:

echo dynpm > /sys/class/drm/card0/device/power_method

and

echo low > /sys/class/drm/card0/device/power_profile

Give it a try, let me know if works for you.

Anyone have a real explanation for this issue? I read about this problem with a lot of Notebooks.
I would like to see an official explanation about it. It's not god for free software this kind of issues.
My notebook it's a G62 laptop: 6GB RAM, Intel i3 processor.
Regards

As for as it has been explained to me: For power management, many producers don't follow the specifications. Their windows drivers obviously work because they write them. Linux often only works if exceptions are added to work around problems, but this requires kernel hackers/bug submitters to actually use the laptop you have, so they are aware of the needed exceptions.

exactly same problem, i upgraded to 12.10 but no help. Temp never reduces below 60. If i open even Firefox it goes to 70 and there is no problem with win 7. Will these problem be resolved or swithcing to other (lighter) linux versions is the only solution?

This was a well known problem 10 years ago when I was running Gentoo. I cannot say that this problem is the same, but back then what usually happened was that Windows was compiled towards a generic target, eg. i386 or i586. My Gentoo install was blood optimized with -march=<best possible> and -O3 + very often cache line optimization, and some more tweaks. The net result of this was that more parts of the CPU were constantly used. Partly caused by the extra instructionsets being used, but also because IO was limited, this seemed to cause much more rapid overheating.

Most PCs were not tested against this, but hopefully at least tested with generic cpuburns on Windows.

If this is happening it is a hardware design problem, eg. your heatsinks are not designed to cope with the extra heat.

My problem BTW was fixed by the simple suggestion of cleaning my vents with compressed air. Thanks ak, sometimes I over think my problems and seem to miss the obvious solutions.

I have the same problem in my acer 5760 notebook. Temperature in idle mode is 74 degree!
Installed jupiter and set the cpu clock to 0,8 Mhz
Same interesting information:
sudo cat /sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_cur_freq
2500000

sudo cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq
800000

So it seems that setting the cpu frequency does not scale the real cpu frequency
My kernel version: 3.7.0-7-generic
Installation type: wubi

lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 12.10
Release: 12.10
Codename: quantal

My boot parameters:
grep CMDLINE /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.i915_enable_rc6=-1 i915.i915_enable_fbc=1 elevator=deadline pcie_aspm=force i915.lvds_downclock=1 drm.vblankoffdelay=1"
Done all latest upgrade. It seems that this problem affects lot of people using i915 chipset

dmesg output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0-7-generic (buildd@meitnerium) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #15-Ubuntu SMP Sat Dec 15 16:34:25 UTC 2012 (Ubuntu 3.7.0-7.15-generic 3.7.0)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-7-generic root=UUID=CC90653390652564 loop=/ubuntu/disks/root.disk ro quiet splash i915.i915_enable_rc6=-1 i915.i915_enable_fbc=1 elevator=deadline pcie_aspm=force i915.lvds_downclock=1 vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a6e3efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6e3f000-0x00000000a6ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Acer TravelMate 5760/BAV50_HR, BIOS V1.18 10/17/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FF0000000 write-back
[ 0.000000] 8 base 14FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xa6ffffff]
[ 0.000000] [mem 0x00000000-0xa6ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xa6ffffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14fdfffff]
[ 0.000000] [mem 0x100000000-0x14fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x14fdfffff @ [mem 0xa6e3c000-0xa6e3efff]
[ 0.000000] RAMDISK: [mem 0x36076000-0x37032fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 00000000a6ffe120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000a6ffc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 00000000a6fee000 0ADD3 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 00000000a6f6d000 00040
[ 0.000000] ACPI: ASF! 00000000a6ffd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 00000000a6ffb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 00000000a6ffa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 00000000a6ff9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 00000000a6fed000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fec000 00C43 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 00000000a6fea000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 00000000a6fe7000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fe6000 007C2 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fe5000 00996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14fdfffff]
[ 0.000000] NODE_DATA [mem 0x14fdfc000-0x14fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014b600000-ffff88014f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xa6e3efff]
[ 0.000000] node 0: [mem 0xa6fff000-0xa6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x14fdfffff]
[ 0.000000] On node 0 totalpages: 1010637
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 663168 pages, LIFO batch:31
[ 0.000000] Normal zone: 5112 pages used for memmap
[ 0.000000] Normal zone: 322056 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000a6e3f000 - 00000000a6ebf000
[ 0.000000] PM: Registered nosave memory: 00000000a6ebf000 - 00000000a6fbf000
[ 0.000000] PM: Registered nosave memory: 00000000a6fbf000 - 00000000a6fff000
[ 0.000000] PM: Registered nosave memory: 00000000a7000000 - 00000000afa00000
[ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014fa00000 s84736 r8192 d21760 u262144
[ 0.000000] pcpu-alloc: s84736 r8192 d21760 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 989135
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-7-generic root=UUID=CC90653390652564 loop=/ubuntu/disks/root.disk ro quiet splash i915.i915_enable_rc6=-1 i915.i915_enable_fbc=1 elevator=deadline pcie_aspm=force i915.lvds_downclock=1 vt.handoff=7
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3880044k/5502976k available (6900k kernel code, 1460428k absent, 162504k reserved, 6312k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2494.476 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.95 BogoMIPS (lpj=9977904)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000039] AppArmor: AppArmor initialized
[ 0.000040] Yama: becoming mindful.
[ 0.000317] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001340] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001786] Mount-cache hash table entries: 256
[ 0.001958] Initializing cgroup subsys cpuacct
[ 0.001960] Initializing cgroup subsys memory
[ 0.001966] Initializing cgroup subsys devices
[ 0.001967] Initializing cgroup subsys freezer
[ 0.001968] Initializing cgroup subsys blkio
[ 0.001970] Initializing cgroup subsys perf_event
[ 0.001972] Initializing cgroup subsys hugetlb
[ 0.001993] CPU: Physical Processor ID: 0
[ 0.001994] CPU: Processor Core ID: 0
[ 0.001998] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001998] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002001] mce: CPU supports 7 MCE banks
[ 0.002009] CPU0: Thermal monitoring handled by SMI
[ 0.002015] process: using mwait in idle threads
[ 0.002018] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.002018] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002018] tlb_flushall_shift: 5
[ 0.002152] Freeing SMP alternatives: 24k freed
[ 0.004552] ACPI: Core revision 20120913
[ 0.020046] ftrace: allocating 25955 entries in 102 pages
[ 0.032888] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072525] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[ 0.527679] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.527685] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.527686] ... version: 3
[ 0.527687] ... bit width: 48
[ 0.527688] ... generic registers: 4
[ 0.527689] ... value mask: 0000ffffffffffff
[ 0.527690] ... max period: 000000007fffffff
[ 0.527691] ... fixed-purpose events: 3
[ 0.527692] ... event mask: 000000070000000f
[ 0.539668] CPU1: Thermal monitoring handled by SMI
[ 0.541827] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.552934] CPU2: Thermal monitoring handled by SMI
[ 0.566125] CPU3: Thermal monitoring handled by SMI
[ 0.528634] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.568220] Brought up 4 CPUs
[ 0.568224] smpboot: Total of 4 processors activated (19955.80 BogoMIPS)
[ 0.571353] devtmpfs: initialized
[ 0.572100] EVM: security.selinux
[ 0.572102] EVM: security.SMACK64
[ 0.572103] EVM: security.capability
[ 0.572164] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[ 0.572836] regulator-dummy: no parameters
[ 0.572877] NET: Registered protocol family 16
[ 0.573046] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.573048] ACPI: bus type pci registered
[ 0.573110] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.573112] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.592694] PCI: Using configuration type 1 for base access
[ 0.593445] bio: create slab <bio-0> at 0
[ 0.593518] ACPI: Added _OSI(Module Device)
[ 0.593520] ACPI: Added _OSI(Processor Device)
[ 0.593521] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.593522] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.594849] ACPI: EC: Look up EC in DSDT
[ 0.598616] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.599254] ACPI: SSDT 00000000a6e70718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.599594] ACPI: Dynamic OEM Table Load:
[ 0.599596] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.611210] ACPI: SSDT 00000000a6e71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.611571] ACPI: Dynamic OEM Table Load:
[ 0.611573] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.631070] ACPI: SSDT 00000000a6e6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.631402] ACPI: Dynamic OEM Table Load:
[ 0.631404] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 1.046518] ACPI: Interpreter enabled
[ 1.046521] ACPI: (supports S0 S3 S4 S5)
[ 1.046537] ACPI: Using IOAPIC for interrupt routing
[ 1.049382] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.049525] ACPI: No dock devices found.
[ 1.049528] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.049776] \_SB_.PCI0:_OSC invalid UUID
[ 1.049777] _OSC request data:1 8 1f
[ 1.049781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.050196] PCI host bridge to bus 0000:00
[ 1.050198] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.050200] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.050202] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.050204] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.050205] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 1.050213] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.050248] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.050258] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 1.050264] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.050268] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 1.050321] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.050345] pci 0000:00:16.0: reg 10: [mem 0xc6404000-0xc640400f 64bit]
[ 1.050427] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.050462] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.050748] pci 0000:00:1a.0: reg 10: [mem 0xc6409000-0xc64093ff]
[ 1.052380] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.052408] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.052424] pci 0000:00:1b.0: reg 10: [mem 0xc6400000-0xc6403fff 64bit]
[ 1.052493] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.052517] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.052595] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.052621] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.052699] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.052727] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.052806] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.052833] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 1.052911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.052943] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.053221] pci 0000:00:1d.0: reg 10: [mem 0xc6408000-0xc64083ff]
[ 1.054849] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.054876] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 1.055000] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.055019] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
[ 1.055027] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
[ 1.055035] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
[ 1.055043] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
[ 1.055051] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 1.055059] pci 0000:00:1f.2: reg 24: [mem 0xc6407000-0xc64077ff]
[ 1.055105] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.055124] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.055140] pci 0000:00:1f.3: reg 10: [mem 0xc6405000-0xc64050ff 64bit]
[ 1.055161] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f]
[ 1.055235] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.055311] pci 0000:03:00.0: [1969:1083] type 00 class 0x020000
[ 1.055340] pci 0000:03:00.0: reg 10: [mem 0xc5400000-0xc543ffff 64bit]
[ 1.055355] pci 0000:03:00.0: reg 18: [io 0x4000-0x407f]
[ 1.055483] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.066390] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.066399] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 1.066409] pci 0000:00:1c.1: bridge window [mem 0xc5400000-0xc63fffff]
[ 1.066424] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.066514] pci 0000:06:00.0: [10ec:5209] type 00 class 0xff0000
[ 1.066536] pci 0000:06:00.0: reg 10: [mem 0xc4400000-0xc4400fff]
[ 1.066686] pci 0000:06:00.0: supports D1 D2
[ 1.066687] pci 0000:06:00.0: PME# supported from D1 D2 D3hot
[ 1.074392] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 1.074402] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 1.074411] pci 0000:00:1c.4: bridge window [mem 0xc4400000-0xc53fffff]
[ 1.074425] pci 0000:00:1c.4: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.074503] pci 0000:07:00.0: [168c:002e] type 00 class 0x028000
[ 1.074531] pci 0000:07:00.0: reg 10: [mem 0xc3400000-0xc340ffff 64bit]
[ 1.074659] pci 0000:07:00.0: supports D1
[ 1.074661] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 1.082361] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 1.082371] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.082380] pci 0000:00:1c.5: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.082394] pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 1.082438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.082536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.082559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.082585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.082608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.082671] \_SB_.PCI0:_OSC invalid UUID
[ 1.082672] _OSC request data:1 1f 1f
[ 1.082675] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.082676] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.084723] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.084763] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.084801] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.084838] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.084875] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.084912] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.084951] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.084987] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.085064] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.085067] vgaarb: loaded
[ 1.085068] vgaarb: bridge control possible 0000:00:02.0
[ 1.085198] SCSI subsystem initialized
[ 1.085200] ACPI: bus type scsi registered
[ 1.085236] libata version 3.00 loaded.
[ 1.085251] ACPI: bus type usb registered
[ 1.085264] usbcore: registered new interface driver usbfs
[ 1.085272] usbcore: registered new interface driver hub
[ 1.085288] usbcore: registered new device driver usb
[ 1.085343] PCI: Using ACPI for IRQ routing
[ 1.091801] PCI: pci_cache_line_size set to 64 bytes
[ 1.091864] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 1.091865] e820: reserve RAM buffer [mem 0xa6e3f000-0xa7ffffff]
[ 1.091867] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[ 1.091868] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
[ 1.091937] NetLabel: Initializing
[ 1.091939] NetLabel: domain hash size = 128
[ 1.091939] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.091947] NetLabel: unlabeled traffic allowed by default
[ 1.092017] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.092022] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.094029] Switching to clocksource hpet
[ 1.098382] AppArmor: AppArmor Filesystem Enabled
[ 1.098405] pnp: PnP ACPI init
[ 1.098415] ACPI: bus type pnp registered
[ 1.098661] pnp 00:00: [bus 00-fe]
[ 1.098664] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.098666] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.098667] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.098669] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.098670] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.098672] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.098674] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.098675] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.098677] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.098678] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.098680] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.098681] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.098683] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.098684] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.098687] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.098689] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.098690] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.098692] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[ 1.098721] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.098738] pnp 00:01: [io 0x0000-0x001f]
[ 1.098739] pnp 00:01: [io 0x0081-0x0091]
[ 1.098741] pnp 00:01: [io 0x0093-0x009f]
[ 1.098742] pnp 00:01: [io 0x00c0-0x00df]
[ 1.098744] pnp 00:01: [dma 4]
[ 1.098755] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.098761] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.098771] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.098833] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.098846] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.098853] pnp 00:04: [io 0x00f0]
[ 1.098863] pnp 00:04: [irq 13]
[ 1.098874] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.098882] pnp 00:05: [io 0x002e-0x002f]
[ 1.098884] pnp 00:05: [io 0x004e-0x004f]
[ 1.098885] pnp 00:05: [io 0x0061]
[ 1.098886] pnp 00:05: [io 0x0063]
[ 1.098888] pnp 00:05: [io 0x0065]
[ 1.098889] pnp 00:05: [io 0x0067]
[ 1.098890] pnp 00:05: [io 0x0070]
[ 1.098892] pnp 00:05: [io 0x0080]
[ 1.098893] pnp 00:05: [io 0x0092]
[ 1.098894] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.098896] pnp 00:05: [io 0x0680-0x069f]
[ 1.098897] pnp 00:05: [io 0x1000-0x100f]
[ 1.098899] pnp 00:05: [io 0x1010-0x1013]
[ 1.098900] pnp 00:05: [io 0xffff]
[ 1.098901] pnp 00:05: [io 0x0400-0x0453]
[ 1.098903] pnp 00:05: [io 0x0458-0x047f]
[ 1.098904] pnp 00:05: [io 0x0500-0x057f]
[ 1.098906] pnp 00:05: [io 0x164e-0x164f]
[ 1.098934] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.098936] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.098938] system 00:05: [io 0x1010-0x1013] has been reserved
[ 1.098939] system 00:05: [io 0xffff] has been reserved
[ 1.098941] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.098943] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.098944] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.098946] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.098948] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.098955] pnp 00:06: [io 0x0070-0x0077]
[ 1.098960] pnp 00:06: [irq 8]
[ 1.098970] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.098985] pnp 00:07: [io 0x0454-0x0457]
[ 1.099003] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.099005] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.099012] pnp 00:08: [io 0x0060]
[ 1.099013] pnp 00:08: [io 0x0064]
[ 1.099018] pnp 00:08: [irq 1]
[ 1.099028] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.099037] pnp 00:09: [irq 12]
[ 1.099049] pnp 00:09: Plug and Play ACPI device, IDs SYN1b4f SYN1b00 SYN0002 PNP0f13 (active)
[ 1.099133] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.099134] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 1.099136] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.099137] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.099140] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.099142] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.099143] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 1.099144] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.099146] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.099147] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
[ 1.099170] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.099171] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.099173] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.099175] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.099177] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.099178] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.099180] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.099182] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.099184] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.099185] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
[ 1.099188] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.099356] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 1.099357] pnp 00:0b: [mem 0x40000000-0x401fffff]
[ 1.099378] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[ 1.099380] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
[ 1.099382] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.099413] pnp: PnP ACPI: found 12 devices
[ 1.099414] ACPI: ACPI bus type pnp unregistered
[ 1.105339] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.105352] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.105355] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 1.105360] pci 0000:00:1c.1: bridge window [mem 0xc5400000-0xc63fffff]
[ 1.105365] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.105371] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 1.105374] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 1.105380] pci 0000:00:1c.4: bridge window [mem 0xc4400000-0xc53fffff]
[ 1.105384] pci 0000:00:1c.4: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.105390] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 1.105393] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.105398] pci 0000:00:1c.5: bridge window [mem 0xc3400000-0xc43fffff]
[ 1.105403] pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 1.105438] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.105440] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.105441] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.105443] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 1.105445] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 1.105446] pci_bus 0000:03: resource 1 [mem 0xc5400000-0xc63fffff]
[ 1.105448] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 1.105449] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 1.105451] pci_bus 0000:06: resource 1 [mem 0xc4400000-0xc53fffff]
[ 1.105453] pci_bus 0000:06: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 1.105454] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 1.105456] pci_bus 0000:07: resource 1 [mem 0xc3400000-0xc43fffff]
[ 1.105457] pci_bus 0000:07: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[ 1.105486] NET: Registered protocol family 2
[ 1.106039] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.107759] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.107981] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.108008] TCP: reno registered
[ 1.108015] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.108037] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.108113] NET: Registered protocol family 1
[ 1.108125] pci 0000:00:02.0: Boot video device
[ 1.138051] PCI: CLS 64 bytes, default 64
[ 1.138107] Trying to unpack rootfs image as initramfs...
[ 1.373806] Freeing initrd memory: 16116k freed
[ 1.375832] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.375837] software IO TLB [mem 0xa2e3c000-0xa6e3bfff] (64MB) mapped at [ffff8800a2e3c000-ffff8800a6e3bfff]
[ 1.375896] Simple Boot Flag at 0x44 set to 0x1
[ 1.376229] Initialise module verification
[ 1.376267] audit: initializing netlink socket (disabled)
[ 1.376276] type=2000 audit(1373103314.920:1): initialized
[ 1.401880] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.403016] VFS: Disk quotas dquot_6.5.2
[ 1.403051] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.403437] fuse init (API version 7.20)
[ 1.403494] msgmni has been set to 7609
[ 1.403860] Key type asymmetric registered
[ 1.403862] Asymmetric key parser 'x509' registered
[ 1.403893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.403917] io scheduler noop registered
[ 1.403918] io scheduler deadline registered (default)
[ 1.403922] io scheduler cfq registered
[ 1.404151] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.404164] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.404195] intel_idle: MWAIT substates: 0x21120
[ 1.404196] intel_idle: v0.4 model 0x2A
[ 1.404197] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.404349] ACPI: AC Adapter [ACAD] (on-line)
[ 1.404474] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.404478] ACPI: Power Button [PWRB]
[ 1.404502] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.404504] ACPI: Sleep Button [SLPB]
[ 1.404530] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.404544] ACPI: Lid Switch [LID]
[ 1.404568] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.404570] ACPI: Power Button [PWRF]
[ 1.404626] ACPI: Requesting acpi_cpufreq
[ 1.407879] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.407881] ACPI: Thermal Zone [THRM] (70 C)
[ 1.407898] GHES: HEST is not enabled!
[ 1.407968] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.408424] ACPI: Battery Slot [BAT1] (battery present)
[ 1.408951] Linux agpgart interface v0.103
[ 1.409949] brd: module loaded
[ 1.410440] loop: module loaded
[ 1.410512] ahci 0000:00:1f.2: version 3.0
[ 1.410577] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.410602] ahci: SSS flag set, parallel bus scan disabled
[ 1.410626] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.410629] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 1.410633] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.417964] scsi0 : ahci
[ 1.418031] scsi1 : ahci
[ 1.418077] scsi2 : ahci
[ 1.418121] scsi3 : ahci
[ 1.418165] scsi4 : ahci
[ 1.418207] scsi5 : ahci
[ 1.418230] ata1: SATA max UDMA/133 abar m2048@0xc6407000 port 0xc6407100 irq 40
[ 1.418233] ata2: SATA max UDMA/133 abar m2048@0xc6407000 port 0xc6407180 irq 40
[ 1.418234] ata3: DUMMY
[ 1.418235] ata4: DUMMY
[ 1.418236] ata5: DUMMY
[ 1.418237] ata6: DUMMY
[ 1.418459] libphy: Fixed MDIO Bus: probed
[ 1.418500] tun: Universal TUN/TAP device driver, 1.6
[ 1.418501] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 1.418533] PPP generic driver version 2.4.2
[ 1.418569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.418596] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.418599] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.418604] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.422503] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.422511] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.422524] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc6409000
[ 1.433628] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.433668] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.433673] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.433678] usb usb1: Product: EHCI Host Controller
[ 1.433683] usb usb1: Manufacturer: Linux 3.7.0-7-generic ehci_hcd
[ 1.433695] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.433807] hub 1-0:1.0: USB hub found
[ 1.433811] hub 1-0:1.0: 2 ports detected
[ 1.433887] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.433891] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.433894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.437803] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.437810] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.437822] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc6408000
[ 1.449608] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.449647] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.449653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.449658] usb usb2: Product: EHCI Host Controller
[ 1.449671] usb usb2: Manufacturer: Linux 3.7.0-7-generic ehci_hcd
[ 1.449673] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.449773] hub 2-0:1.0: USB hub found
[ 1.449778] hub 2-0:1.0: 2 ports detected
[ 1.449844] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.449854] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.449898] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.456197] i8042: Detected active multiplexing controller, rev 1.1
[ 1.459595] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.459600] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.459616] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.459629] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.459640] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.459729] mousedev: PS/2 mouse device common for all mice
[ 1.460029] rtc_cmos 00:06: RTC can wake from S4
[ 1.460142] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.460169] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.460236] device-mapper: uevent: version 1.0.3
[ 1.460282] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: <email address hidden>
[ 1.460344] cpuidle: using governor ladder
[ 1.460423] cpuidle: using governor menu
[ 1.460427] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.460428] EFI Variables Facility v0.08 2004-May-17
[ 1.460579] ashmem: initialized
[ 1.460671] TCP: cubic registered
[ 1.460745] NET: Registered protocol family 10
[ 1.460878] NET: Registered protocol family 17
[ 1.460886] Key type dns_resolver registered
[ 1.461077] Loading module verification certificates
[ 1.461927] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a37e8d8f17247a12bca04fac461c3b30422126d5'
[ 1.461937] registered taskstats version 1
[ 1.464143] Key type trusted registered
[ 1.465711] Key type encrypted registered
[ 1.467888] rtc_cmos 00:06: setting system clock to 2013-07-06 09:35:16 UTC (1373103316)
[ 1.468471] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.468473] EDD information not available.
[ 1.480731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.737326] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.739356] ata1.00: ATA-8: ST9500325ASG, 0001SDM1, max UDMA/133
[ 1.739366] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.739804] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.742625] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.742640] ata1.00: configured for UDMA/133
[ 1.742896] scsi 0:0:0:0: Direct-Access ATA ST9500325ASG 0001 PQ: 0 ANSI: 5
[ 1.743036] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.743044] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.743132] sd 0:0:0:0: [sda] Write Protect is off
[ 1.743135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.743222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.745251] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.759596] sda: sda1 sda2 sda3
[ 1.760083] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.877645] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.877655] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.877970] hub 1-1:1.0: USB hub found
[ 1.878172] hub 1-1:1.0: 6 ports detected
[ 1.988991] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.060906] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.062892] ata2.00: ATAPI: MATSHITADVD-RAM UJ8B0AW, 1.00, max UDMA/100
[ 2.067251] ata2.00: configured for UDMA/100
[ 2.069580] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B0AW 1.00 PQ: 0 ANSI: 5
[ 2.071656] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.071664] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.071874] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.071954] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.073448] Freeing unused kernel memory: 984k freed
[ 2.073535] Write protecting the kernel read-only data: 12288k
[ 2.076305] Freeing unused kernel memory: 1280k freed
[ 2.078662] Freeing unused kernel memory: 1148k freed
[ 2.090511] udevd[121]: starting version 175
[ 2.121037] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.121041] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.121314] hub 2-1:1.0: USB hub found
[ 2.121405] hub 2-1:1.0: 6 ports detected
[ 2.150029] atl1c 0000:03:00.0: version 1.0.1.0-NAPI
[ 2.192893] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 2.334395] usb 1-1.1: New USB device found, idVendor=058f, idProduct=b002
[ 2.334405] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.334411] usb 1-1.1: Product: 1.3M HD WebCam
[ 2.334415] usb 1-1.1: Manufacturer: AAC5K00FS
[ 2.372453] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[ 2.372464] Switching to clocksource tsc
[ 2.408458] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
[ 2.502300] usb 2-1.6: New USB device found, idVendor=1c7a, idProduct=0603
[ 2.502310] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.502315] usb 2-1.6: Product: EgisTec_ES603
[ 2.502320] usb 2-1.6: Manufacturer: EgisTec
[ 3.246910] EXT4-fs (loop0): INFO: recovery required on readonly filesystem
[ 3.246912] EXT4-fs (loop0): write access will be enabled during recovery
[ 4.665322] EXT4-fs (loop0): recovery complete
[ 4.708092] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 10.820526] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k
[ 10.847134] EXT4-fs (loop0): re-mounted. Opts: (null)
[ 10.891885] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.958477] udevd[535]: starting version 175
[ 11.380173] init: rsyslog main process (568) terminated with status 127
[ 11.380190] init: rsyslog main process ended, respawning
[ 11.485330] Disabling lock debugging due to kernel taint
[ 12.491835] wmi: Mapper loaded
[ 12.585617] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 2.072078] ACPI: Invalid Power Resource to register!
[ 12.743223] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[ 12.743231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.743235] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 12.743239] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.743241] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 12.743251] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.743252] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[ 12.743255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.743257] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.178623] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 13.178635] acer_wmi: Function bitmap for Communication Button: 0x4801
[ 13.178639] acer_wmi: Brightness must be controlled by generic video driver
[ 13.178723] acer_wmi: Disabling ACPI video driver
[ 13.186761] input: Acer WMI hotkeys as /devices/virtual/input/input5
[ 13.187030] input: Acer BMA150 accelerometer as /devices/virtual/input/input6
[ 13.237798] mei 0000:00:16.0: setting latency timer to 64
[ 13.237859] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[ 13.249274] mei 0000:00:16.0: wd: failed to find the client
[ 13.539425] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 13.541641] cfg80211: Calling CRDA to update world regulatory domain
[ 13.542611] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 13.543689] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 13.544722] microcode: Microcode Update Driver: v2.00 <email address hidden>, Peter Oruba
[ 13.565570] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.566064] rts_pstor: Initializing Realtek PCIE storage driver...
[ 13.566133] rts_pstor 0000:06:00.0: Resource length: 0x1000
[ 13.566146] rts_pstor 0000:06:00.0: Original address: 0xc4400000, remapped address: 0xffffc90000678000
[ 13.566150] rts_pstor 0000:06:00.0: pci->irq = 16
[ 13.566152] rts_pstor 0000:06:00.0: rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 16
[ 13.623706] lp: driver loaded but no devices found
[ 13.653926] usb 2-1.5: new full-speed USB device number 4 using ehci_hcd
[ 13.746344] ppdev: user-space parallel port driver
[ 13.747795] usb 2-1.5: New USB device found, idVendor=0489, idProduct=e03c
[ 13.747805] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.747811] usb 2-1.5: Product: Bluetooth USB Host Controller
[ 13.747816] usb 2-1.5: Manufacturer: Atheros Communications
[ 13.747820] usb 2-1.5: SerialNumber: Alaska Day 2006
[ 13.769825] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[ 13.769894] rts_pstor 0000:06:00.0: rts_pstor: waiting for device to settle before scanning
[ 13.902579] [drm] Initialized drm 1.1.0 20060810
[ 14.038119] Bluetooth: Core ver 2.16
[ 14.038157] NET: Registered protocol family 31
[ 14.038159] Bluetooth: HCI device and connection manager initialized
[ 14.038166] Bluetooth: HCI socket layer initialized
[ 14.038169] Bluetooth: L2CAP socket layer initialized
[ 14.038174] Bluetooth: SCO socket layer initialized
[ 14.074300] Linux video capture interface: v2.00
[ 14.216083] usbcore: registered new interface driver btusb
[ 14.217814] Bluetooth: RFCOMM TTY layer initialized
[ 14.217825] Bluetooth: RFCOMM socket layer initialized
[ 14.217826] Bluetooth: RFCOMM ver 1.11
[ 14.302109] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.302113] Bluetooth: BNEP filters: protocol multicast
[ 14.302121] Bluetooth: BNEP socket layer initialized
[ 14.304053] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400, board id: 1474, fw id: 793787
[ 14.351612] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 14.478999] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002)
[ 14.482355] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[ 14.482425] usbcore: registered new interface driver uvcvideo
[ 14.482427] USB Video Class driver (1.1.1)
[ 14.768392] rts_pstor 0000:06:00.0: rts_pstor: device scan complete
[ 14.768516] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 14.768653] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.768750] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 15.065881] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 15.065942] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 15.066660] pci 0000:00:00.0: detected 131072K stolen memory
[ 15.066702] i915 0000:00:02.0: setting latency timer to 64
[ 15.088437] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 15.088444] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.088445] [drm] Driver supports precise vblank timestamp query.
[ 15.088471] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.273737] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 15.442814] fbcon: inteldrmfb (fb0) is primary device
[ 15.561963] usbcore: registered new interface driver ath3k
[ 15.592223] type=1400 audit(1373096130.639:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=754 comm="apparmor_parser"
[ 15.592287] type=1400 audit(1373096130.639:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=728 comm="apparmor_parser"
[ 15.592568] type=1400 audit(1373096130.639:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=754 comm="apparmor_parser"
[ 15.592612] type=1400 audit(1373096130.639:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=728 comm="apparmor_parser"
[ 15.592755] type=1400 audit(1373096130.639:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=754 comm="apparmor_parser"
[ 15.592799] type=1400 audit(1373096130.639:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=728 comm="apparmor_parser"
[ 15.757166] usb 2-1.5: USB disconnect, device number 4
[ 15.954926] usb 2-1.5: new full-speed USB device number 5 using ehci_hcd
[ 15.971346] type=1400 audit(1373096131.019:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=843 comm="apparmor_parser"
[ 15.971742] type=1400 audit(1373096131.019:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=843 comm="apparmor_parser"
[ 15.994499] cfg80211: World regulatory domain updated:
[ 15.994500] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.994502] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.994503] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.994504] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.994505] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.994506] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.048662] usb 2-1.5: New USB device found, idVendor=0489, idProduct=e03c
[ 16.048664] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 16.048665] usb 2-1.5: Product: Bluetooth USB Host Controller
[ 16.048667] usb 2-1.5: Manufacturer: Atheros Communications
[ 16.048668] usb 2-1.5: SerialNumber: Alaska Day 2006
[ 16.064587] ath: phy0: ASPM enabled: 0x42
[ 16.064588] ath: EEPROM regdomain: 0x65
[ 16.064588] ath: EEPROM indicates we should expect a direct regpair map
[ 16.064590] ath: Country alpha2 being used: 00
[ 16.064590] ath: Regpair used: 0x65
[ 16.067325] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 16.067545] Registered led device: ath9k-phy0
[ 16.067552] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010fe0000, irq=17
[ 16.434250] Console: switching to colour frame buffer device 170x48
[ 16.436597] fb0: inteldrmfb frame buffer device
[ 16.436597] drm: registered panic notifier
[ 16.458292] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.458344] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 16.460157] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.460267] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 16.466254] init: failsafe main process (925) killed by TERM signal
[ 16.541053] hda_codec: CX20588: BIOS auto-probing.
[ 16.632411] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 16.632480] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 16.632536] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 20.212460] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
[ 20.230292] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.254152] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.294449] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.303590] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.933247] type=1400 audit(1373096135.987:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1103 comm="apparmor_parser"
[ 20.933556] type=1400 audit(1373096135.987:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1103 comm="apparmor_parser"
[ 20.933729] type=1400 audit(1373096135.987:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1103 comm="apparmor_parser"
[ 21.052256] type=1400 audit(1373096136.107:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1100 comm="apparmor_parser"
[ 21.052264] type=1400 audit(1373096136.107:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1101 comm="apparmor_parser"
[ 21.052664] type=1400 audit(1373096136.107:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1101 comm="apparmor_parser"
[ 21.052675] type=1400 audit(1373096136.107:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1100 comm="apparmor_parser"
[ 21.053225] type=1400 audit(1373096136.107:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1102 comm="apparmor_parser"
[ 21.053507] type=1400 audit(1373096136.107:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1102 comm="apparmor_parser"
[ 21.056581] type=1400 audit(1373096136.111:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1107 comm="apparmor_parser"
[ 21.888234] init: lightdm main process (1215) killed by TERM signal
[ 22.303246] wlan0: authenticate with 00:0c:f6:a3:bc:98
[ 22.319197] wlan0: send auth to 00:0c:f6:a3:bc:98 (try 1/3)
[ 22.322356] wlan0: authenticated
[ 22.322584] wlan0: associate with 00:0c:f6:a3:bc:98 (try 1/3)
[ 22.325320] wlan0: RX AssocResp from 00:0c:f6:a3:bc:98 (capab=0x431 status=0 aid=2)
[ 22.325363] wlan0: associated
[ 22.325369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.325428] cfg80211: Calling CRDA for country: TW
[ 22.328019] ath: regdomain 0x809e updated by CountryIE
[ 22.328021] ath: EEPROM regdomain: 0x809e
[ 22.328022] ath: EEPROM indicates we should expect a country code
[ 22.328023] ath: doing EEPROM country->regdmn map search
[ 22.328024] ath: country maps to regdmn code: 0x50
[ 22.328025] ath: Country alpha2 being used: TW
[ 22.328026] ath: Regpair used: 0x50
[ 22.328057] cfg80211: Regulatory domain changed to country: TW
[ 22.328058] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.328059] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 22.328060] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 22.328061] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 69.702995] usb 2-1.5: USB disconnect, device number 5
[ 500.902352] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 500.943534] JFS: nTxBlock = 8192, nTxLock = 65536
[ 500.982461] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 501.048454] QNX4 filesystem 0.2.3 registered.
[ 501.138283] Btrfs loaded

I've tried to play with 915.i915_enable_rc6=-1 macking change to this parameter without any result
Can't use my linux partition with this thermal condition (now 74 degree !!!)
Up