Ubuntu 10.04 not recognize SATA WD-Blue 500 GB ASUS A8V-MX

Trying the other Ubuntus is completely futile if one doesn't work. The only difference is the desktop and the default app selection. Under the hood they are EXACTLY the same.

Can you boot to the liveCD and run:

dmesg > ~/out123.txt; gedit ~/out123.txt; rm ~/out123.txt

What is output?

Can you also see the disk / partitions in the output of:

sudo fdisk -l

If you have web access in the liveCD you could try:

sudo apt-get update; sudo apt-get --reinstall install gparted ubiquity

to upgrade gparted and ubiquity (the installer app) from the repos. You may need some boot options to get the drive detected properly

I did what you had suggested, so...

*** see the disk / partitions in the output of:sudo fdisk -l

ubuntu@ubuntu:~$ sudo fdisk -l
ubuntu@ubuntu:~$

And, that is the problem... Ubuntu Live not find a HD attached... even if I use only gparted - same answer - blank, nothing, no HD attached...

But, I installed one of the HD 500 GB "not recognized" - the WD-Green 500 GB - in a USB case and plug it...

ubuntu@ubuntu:~$ sudo fdisk -l

Disco /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Unidades = cilindros de 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificador do disco: 0x362b7e9d

Dispositivo Boot Início Fim Blocos Id Sistema
/dev/sda1 * 1 60801 488384001 c W95 FAT32 (LBA)
ubuntu@ubuntu:~$

Why this HD now is recognized it's a misterious to me... I'm gonna try to install the Ubuntu and see what happens...

If it is needed the other answers I can send them all, but it is quite big...

There is no size limit to pastes, go for it!

Well, thank you! So...

***** ... boot to the liveCD and run:
dmesg > ~/out123.txt; gedit ~/out123.txt; rm ~/out123.txt
What is output?

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] modified: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[ 0.000000] modified: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] modified: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 7f691000 - 7ff7f970
[ 0.000000] Allocated new RAMDISK: 008de000 - 011cc970
[ 0.000000] Move RAMDISK from 000000007f691000 - 000000007ff7f96f to 008de000 - 011cc96f
[ 0.000000] ACPI: RSDP 000fac60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ffb0000 00030 (v01 A M I OEMRSDT 11000509 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ffb0200 00084 (v02 A M I OEMFACP 11000509 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ffb03f0 046FE (v01 A0347 A0347001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 7ffbe000 00040
[ 0.000000] ACPI: APIC 7ffb0390 0005C (v01 A M I OEMAPIC 11000509 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ffbe040 00046 (v01 A M I AMI_OEM 11000509 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd21c] BRK ==> [00008da000 - 00008dd21c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 00011cc970] NEW RAMDISK ==> [00008de000 - 00011cc970]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffb0
[ 0.000000] On node 0 totalpages: 524095
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c11ce200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294562 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10483840 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffb0)
[ 0.000000] Memory: 2050588k/2096832k available (4673k kernel code, 44800k reserved, 2122k data, 656k init, 1187528k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2199.881 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.76 BogoMIPS (lpj=8799524)
[ 0.004023] Security Framework initialized
[ 0.004043] AppArmor: AppArmor initialized
[ 0.004050] Mount-cache hash table entries: 512
[ 0.004173] Initializing cgroup subsys ns
[ 0.004177] Initializing cgroup subsys cpuacct
[ 0.004181] Initializing cgroup subsys memory
[ 0.004187] Initializing cgroup subsys devices
[ 0.004190] Initializing cgroup subsys freezer
[ 0.004192] Initializing cgroup subsys net_cls
[ 0.004208] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004211] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004213] CPU: Physical Processor ID: 0
[ 0.004214] CPU: Processor Core ID: 0
[ 0.004218] mce: CPU supports 5 MCE banks
[ 0.004234] Performance Events: AMD PMU driver.
[ 0.004239] ... version: 0
[ 0.004241] ... bit width: 48
[ 0.004243] ... generic registers: 4
[ 0.004245] ... value mask: 0000ffffffffffff
[ 0.004247] ... max period: 00007fffffffffff
[ 0.004249] ... fixed-purpose events: 0
[ 0.004251] ... event mask: 000000000000000f
[ 0.004254] Checking 'hlt' instruction... OK.
[ 0.022124] ACPI: Core revision 20090903
[ 0.028792] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028797] ftrace: allocating 21771 entries in 43 pages
[ 0.032088] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032370] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.074482] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.160061] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
[ 0.160088] Brought up 2 CPUs
[ 0.160091] Total of 2 processors activated (8800.16 BogoMIPS).
[ 0.160289] CPU0 attaching sched-domain:
[ 0.160292] domain 0: span 0-1 level MC
[ 0.160295] groups: 0 1
[ 0.160300] CPU1 attaching sched-domain:
[ 0.160303] domain 0: span 0-1 level MC
[ 0.160305] groups: 1 0
[ 0.160384] devtmpfs: initialized
[ 0.160384] regulator: core version 0.5
[ 0.160384] Time: 15:41:01 Date: 08/28/10
[ 0.160384] NET: Registered protocol family 16
[ 0.160384] EISA bus registered
[ 0.160384] Trying to unpack rootfs image as initramfs...
[ 0.160384] ACPI: bus type pci registered
[ 0.161031] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.161034] PCI: Using configuration type 1 for base access
[ 0.164104] bio: create slab <bio-0> at 0
[ 0.164660] ACPI: EC: Look up EC in DSDT
[ 0.167158] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.170909] ACPI: Interpreter enabled
[ 0.170916] ACPI: (supports S0 S1 S4 S5)
[ 0.170935] ACPI: Using IOAPIC for interrupt routing
[ 0.177835] ACPI Warning: Incorrect checksum in table [OEMB] - A2, should be 9D (20090903/tbutils-314)
[ 0.177946] ACPI: No dock devices found.
[ 0.178055] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.178101] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.178402] pci 0000:00:01.0: supports D1
[ 0.178450] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
[ 0.178457] pci 0000:00:0f.0: reg 14 io port: [0xe880-0xe883]
[ 0.178464] pci 0000:00:0f.0: reg 18 io port: [0xe800-0xe807]
[ 0.178470] pci 0000:00:0f.0: reg 1c io port: [0xe480-0xe483]
[ 0.178477] pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
[ 0.178484] pci 0000:00:0f.0: reg 24 32bit mmio: [0xff6ffc00-0xff6fffff]
[ 0.178510] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.178515] pci 0000:00:0f.0: PME# disabled
[ 0.178560] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.178631] pci 0000:00:10.0: reg 20 io port: [0xe080-0xe09f]
[ 0.178654] pci 0000:00:10.0: supports D1 D2
[ 0.178657] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178661] pci 0000:00:10.0: PME# disabled
[ 0.178702] pci 0000:00:10.1: reg 20 io port: [0xe000-0xe01f]
[ 0.178725] pci 0000:00:10.1: supports D1 D2
[ 0.178728] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178732] pci 0000:00:10.1: PME# disabled
[ 0.178774] pci 0000:00:10.2: reg 20 io port: [0xdc00-0xdc1f]
[ 0.178797] pci 0000:00:10.2: supports D1 D2
[ 0.178799] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178804] pci 0000:00:10.2: PME# disabled
[ 0.178846] pci 0000:00:10.3: reg 20 io port: [0xd880-0xd89f]
[ 0.178869] pci 0000:00:10.3: supports D1 D2
[ 0.178871] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178876] pci 0000:00:10.3: PME# disabled
[ 0.178911] pci 0000:00:10.4: reg 10 32bit mmio: [0xff6ff800-0xff6ff8ff]
[ 0.178952] pci 0000:00:10.4: supports D1 D2
[ 0.178955] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.178959] pci 0000:00:10.4: PME# disabled
[ 0.179059] pci 0000:00:11.5: reg 10 io port: [0xd400-0xd4ff]
[ 0.179097] pci 0000:00:11.5: supports D1 D2
[ 0.179171] pci 0000:00:12.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.179178] pci 0000:00:12.0: reg 14 32bit mmio: [0xff6ff400-0xff6ff4ff]
[ 0.179212] pci 0000:00:12.0: supports D1 D2
[ 0.179215] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179219] pci 0000:00:12.0: PME# disabled
[ 0.179363] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xb0000000-0xb7ffffff]
[ 0.179368] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff]
[ 0.179373] pci 0000:01:00.0: reg 18 32bit mmio: [0xff5f0000-0xff5fffff]
[ 0.179386] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xff5c0000-0xff5dffff]
[ 0.179402] pci 0000:01:00.0: supports D1 D2
[ 0.179423] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xa8000000-0xafffffff]
[ 0.179428] pci 0000:01:00.1: reg 14 32bit mmio: [0xff5e0000-0xff5effff]
[ 0.179452] pci 0000:01:00.1: supports D1 D2
[ 0.179483] pci 0000:00:01.0: bridge io port: [0xa000-0xcfff]
[ 0.179488] pci 0000:00:01.0: bridge 32bit mmio: [0xff500000-0xff5fffff]
[ 0.179493] pci 0000:00:01.0: bridge 32bit mmio pref: [0x9ff00000-0xbfefffff]
[ 0.179540] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.179544] pci 0000:02:00.0: PME# disabled
[ 0.179592] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.179596] pci 0000:02:00.1: PME# disabled
[ 0.179784] pci_bus 0000:00: on NUMA node 0
[ 0.179789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.179897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.179953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.180009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
[ 0.180059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
[ 0.180106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.196668] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.196779] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.196888] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.196997] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.197106] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.197216] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.197329] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.197439] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.197544] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.197549] vgaarb: loaded
[ 0.197655] SCSI subsystem initialized
[ 0.197711] libata version 3.00 loaded.
[ 0.197771] usbcore: registered new interface driver usbfs
[ 0.197782] usbcore: registered new interface driver hub
[ 0.197804] usbcore: registered new device driver usb
[ 0.197915] ACPI: WMI: Mapper loaded
[ 0.197917] PCI: Using ACPI for IRQ routing
[ 0.198073] NetLabel: Initializing
[ 0.198075] NetLabel: domain hash size = 128
[ 0.198077] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.198092] NetLabel: unlabeled traffic allowed by default
[ 0.199819] AppArmor: AppArmor Filesystem Enabled
[ 0.199828] pnp: PnP ACPI init
[ 0.199836] ACPI: bus type pnp registered
[ 0.203201] pnp: PnP ACPI: found 12 devices
[ 0.203204] ACPI: ACPI bus type pnp unregistered
[ 0.203207] PnPBIOS: Disabled by ACPI PNP
[ 0.203218] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.203225] system 00:07: ioport range 0x3e0-0x3e7 has been reserved
[ 0.203228] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.203232] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.203235] system 00:07: ioport range 0x400-0x41f has been reserved
[ 0.203239] system 00:07: iomem range 0xff780000-0xffffffff has been reserved
[ 0.203243] system 00:07: iomem range 0xf0000000-0xf7ffffff has been reserved
[ 0.203249] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.203253] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.203259] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.203265] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.203269] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.203273] system 00:0b: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.237921] Switching to clocksource acpi_pm
[ 2.176259] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 2.176259] pci 0000:00:01.0: IO window: 0xa000-0xcfff
[ 2.176259] pci 0000:00:01.0: MEM window: 0xff500000-0xff5fffff
[ 2.176259] pci 0000:00:01.0: PREFETCH window: 0x9ff00000-0xbfefffff
[ 2.176259] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 2.176259] pci 0000:02:00.0: IO window: disabled
[ 2.176259] pci 0000:02:00.0: MEM window: disabled
[ 2.176259] pci 0000:02:00.0: PREFETCH window: disabled
[ 2.176259] pci 0000:02:00.1: PCI bridge, secondary bus 0000:04
[ 2.176259] pci 0000:02:00.1: IO window: disabled
[ 2.176259] pci 0000:02:00.1: MEM window: disabled
[ 2.176259] pci 0000:02:00.1: PREFETCH window: disabled
[ 2.176259] pci 0000:00:13.0: PCI bridge, secondary bus 0000:02
[ 2.176259] pci 0000:00:13.0: IO window: disabled
[ 2.176259] pci 0000:00:13.0: MEM window: disabled
[ 2.176259] pci 0000:00:13.0: PREFETCH window: disabled
[ 2.176259] pci 0000:00:13.1: PCI bridge, secondary bus 0000:05
[ 2.176259] pci 0000:00:13.1: IO window: disabled
[ 2.176259] pci 0000:00:13.1: MEM window: disabled
[ 2.176259] pci 0000:00:13.1: PREFETCH window: disabled
[ 2.176259] pci 0000:00:01.0: setting latency timer to 64
[ 2.176259] pci 0000:00:13.0: setting latency timer to 64
[ 2.176259] pci 0000:02:00.0: setting latency timer to 64
[ 2.176259] pci 0000:02:00.1: setting latency timer to 64
[ 2.176259] pci 0000:00:13.1: setting latency timer to 64
[ 2.176259] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 2.176259] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 2.176259] pci_bus 0000:01: resource 0 io: [0xa000-0xcfff]
[ 2.176259] pci_bus 0000:01: resource 1 mem: [0xff500000-0xff5fffff]
[ 2.176259] pci_bus 0000:01: resource 2 pref mem [0x9ff00000-0xbfefffff]
[ 2.176292] NET: Registered protocol family 2
[ 2.176409] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.176826] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.177855] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.178348] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.178352] TCP reno registered
[ 2.178480] NET: Registered protocol family 1
[ 2.178511] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 2.178604] pci 0000:01:00.0: Boot video device
[ 2.178807] cpufreq-nforce2: No nForce2 chipset.
[ 2.178833] Scanning for low memory corruption every 60 seconds
[ 2.178951] audit: initializing netlink socket (disabled)
[ 2.178963] type=2000 audit(1283010063.176:1): initialized
[ 2.188375] highmem bounce pool size: 64 pages
[ 2.188380] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.189855] VFS: Disk quotas dquot_6.5.2
[ 2.189917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.190487] fuse init (API version 7.13)
[ 2.190569] msgmni has been set to 1687
[ 2.190813] alg: No test for stdrng (krng)
[ 2.190872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.190877] io scheduler noop registered
[ 2.190880] io scheduler anticipatory registered
[ 2.190882] io scheduler deadline registered
[ 2.190921] io scheduler cfq registered (default)
[ 2.191120] alloc irq_desc for 24 on node -1
[ 2.191123] alloc kstat_irqs on node -1
[ 2.191136] pcieport 0000:02:00.0: irq 24 for MSI/MSI-X
[ 2.191146] pcieport 0000:02:00.0: setting latency timer to 64
[ 2.191233] alloc irq_desc for 25 on node -1
[ 2.191236] alloc kstat_irqs on node -1
[ 2.191243] pcieport 0000:02:00.1: irq 25 for MSI/MSI-X
[ 2.191249] pcieport 0000:02:00.1: setting latency timer to 64
[ 2.191306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.191329] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.191456] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.191467] ACPI: Sleep Button [SLPB]
[ 2.191510] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.191515] ACPI: Power Button [PWRB]
[ 2.191563] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.191566] ACPI: Power Button [PWRF]
[ 2.191875] processor LNXCPU:00: registered as cooling_device0
[ 2.191909] processor LNXCPU:01: registered as cooling_device1
[ 2.195987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.196100] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.196421] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.197439] brd: module loaded
[ 2.197887] loop: module loaded
[ 2.197967] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.198109] alloc irq_desc for 21 on node -1
[ 2.198112] alloc kstat_irqs on node -1
[ 2.198120] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.198175] pata_acpi 0000:00:0f.0: PCI INT B disabled
[ 2.198498] Fixed MDIO Bus: probed
[ 2.198531] PPP generic driver version 2.4.2
[ 2.198570] tun: Universal TUN/TAP device driver, 1.6
[ 2.198573] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 2.198648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.198666] alloc irq_desc for 22 on node -1
[ 2.198668] alloc kstat_irqs on node -1
[ 2.198672] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.198692] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.198734] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.198770] ehci_hcd 0000:00:10.4: debug port 1
[ 2.198796] ehci_hcd 0000:00:10.4: irq 22, io mem 0xff6ff800
[ 2.198858] isapnp: Scanning for PnP cards...
[ 2.209041] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.209183] usb usb1: configuration #1 chosen from 1 choice
[ 2.209212] hub 1-0:1.0: USB hub found
[ 2.209224] hub 1-0:1.0: 8 ports detected
[ 2.209296] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.209315] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.209363] alloc irq_desc for 20 on node -1
[ 2.209365] alloc kstat_irqs on node -1
[ 2.209371] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.209381] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.209415] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.209447] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e080
[ 2.209530] usb usb2: configuration #1 chosen from 1 choice
[ 2.209551] hub 2-0:1.0: USB hub found
[ 2.209558] hub 2-0:1.0: 2 ports detected
[ 2.209598] uhci_hcd 0000:00:10.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.209603] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.209629] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.209647] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e000
[ 2.209724] usb usb3: configuration #1 chosen from 1 choice
[ 2.209748] hub 3-0:1.0: USB hub found
[ 2.209754] hub 3-0:1.0: 2 ports detected
[ 2.209791] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.209797] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.209822] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.209847] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
[ 2.209921] usb usb4: configuration #1 chosen from 1 choice
[ 2.209945] hub 4-0:1.0: USB hub found
[ 2.209951] hub 4-0:1.0: 2 ports detected
[ 2.209986] alloc irq_desc for 23 on node -1
[ 2.209988] alloc kstat_irqs on node -1
[ 2.209991] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.209997] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.210024] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.210049] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d880
[ 2.210127] usb usb5: configuration #1 chosen from 1 choice
[ 2.210148] hub 5-0:1.0: USB hub found
[ 2.210155] hub 5-0:1.0: 2 ports detected
[ 2.210234] PNP: No PS/2 controller found. Probing ports directly.
[ 2.210630] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.210636] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.210712] mice: PS/2 mouse device common for all mice
[ 2.210814] rtc_cmos 00:02: RTC can wake from S4
[ 2.210847] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.210879] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 2.210973] device-mapper: uevent: version 1.0.3
[ 2.231411] Freeing initrd memory: 9146k freed
[ 2.248196] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 2.248306] device-mapper: multipath: version 1.1.0 loaded
[ 2.248308] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.248436] EISA: Probing bus 0 at eisa.0
[ 2.248460] Cannot allocate resource for EISA slot 5
[ 2.248474] EISA: Detected 0 cards.
[ 2.248545] cpuidle: using governor ladder
[ 2.248547] cpuidle: using governor menu
[ 2.248970] TCP cubic registered
[ 2.249127] NET: Registered protocol family 10
[ 2.249553] lo: Disabled Privacy Extensions
[ 2.249849] NET: Registered protocol family 17
[ 2.249883] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.20.00)
[ 2.249896] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 2.249898] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 2.249916] Using IPI No-Shortcut mode
[ 2.249979] PM: Resume from disk failed.
[ 2.249992] registered taskstats version 1
[ 2.250314] Magic number: 6:839:690
[ 2.250360] mem mem: hash matches
[ 2.250432] rtc_cmos 00:02: setting system clock to 2010-08-28 15:41:03 UTC (1283010063)
[ 2.250436] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.250438] EDD information not available.
[ 2.553095] isapnp: No Plug & Play device found
[ 2.553108] Freeing unused kernel memory: 656k freed
[ 2.553586] Write protecting the kernel text: 4676k
[ 2.553621] Write protecting the kernel read-only data: 1840k
[ 2.573440] udev: starting version 151
[ 2.645565] Linux agpgart interface v0.103
[ 2.672228] pata_via 0000:00:0f.1: version 0.3.4
[ 2.687616] scsi0 : pata_via
[ 2.687819] scsi1 : pata_via
[ 2.689036] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.689039] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.689345] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[ 2.694639] [drm] Initialized drm 1.1.0 20060810
[ 2.697762] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.699065] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.702328] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.702945] eth0: VIA Rhine II at 0xff6ff400, 00:17:31:d4:01:a5, IRQ 23.
[ 2.703654] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 2.703683] ahci 0000:00:0f.0: version 3.0
[ 2.703697] ahci 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.703745] alloc irq_desc for 26 on node -1
[ 2.703747] alloc kstat_irqs on node -1
[ 2.703758] ahci 0000:00:0f.0: irq 26 for MSI/MSI-X
[ 2.703768] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
[ 2.703770] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
[ 2.703825] ahci 0000:00:0f.0: PCI: Disallowing DAC for device
[ 2.703852] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 2.703856] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
[ 2.705752] scsi2 : ahci
[ 2.705879] scsi3 : ahci
[ 2.705960] scsi4 : ahci
[ 2.706042] scsi5 : ahci
[ 2.706531] ata3: SATA max UDMA/133 abar m1024@0xff6ffc00 port 0xff6ffd00 irq 26
[ 2.706535] ata4: SATA max UDMA/133 abar m1024@0xff6ffc00 port 0xff6ffd80 irq 26
[ 2.706540] ata5: SATA max UDMA/133 abar m1024@0xff6ffc00 port 0xff6ffe00 irq 26
[ 2.706543] ata6: SATA max UDMA/133 abar m1024@0xff6ffc00 port 0xff6ffe80 irq 26
[ 2.836018] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 3.012574] usb 2-1: configuration #1 chosen from 1 choice
[ 3.016417] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.04, max UDMA/66
[ 3.024045] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.024067] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.032339] ata2.00: configured for UDMA/66
[ 3.034377] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.04 PQ: 0 ANSI: 5
[ 3.036073] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.036076] Uniform CD-ROM driver Revision: 3.20
[ 3.036179] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.036240] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 3.188024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.188039] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.252016] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 3.427550] usb 2-2: configuration #1 chosen from 1 choice
[ 3.435938] usbcore: registered new interface driver hiddev
[ 3.450765] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
[ 3.450847] generic-usb 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:10.0-1/input0
[ 3.464722] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5
[ 3.464792] generic-usb 0003:046D:C063.0002: input,hidraw1: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:10.0-2/input0
[ 3.464811] usbcore: registered new interface driver usbhid
[ 3.464814] usbhid: v2.6:USB HID core driver
[ 8.188016] ata3.00: qc timeout (cmd 0xec)
[ 8.188025] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 8.188038] ata5.00: qc timeout (cmd 0xec)
[ 8.188044] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 8.672024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.672040] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.672013] ata3.00: qc timeout (cmd 0xec)
[ 18.672019] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 18.672022] ata3: limiting SATA link speed to 1.5 Gbps
[ 18.672032] ata5.00: qc timeout (cmd 0xec)
[ 18.672038] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 18.672040] ata5: limiting SATA link speed to 1.5 Gbps
[ 19.156023] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.156036] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 49.156013] ata5.00: qc timeout (cmd 0xec)
[ 49.156019] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 49.156028] ata3.00: qc timeout (cmd 0xec)
[ 49.156033] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 49.640023] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 49.640037] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 49.693116] [drm] radeon defaulting to kernel modesetting.
[ 49.693119] [drm] radeon kernel modesetting enabled.
[ 49.693173] alloc irq_desc for 16 on node -1
[ 49.693175] alloc kstat_irqs on node -1
[ 49.693183] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 49.694907] [drm] radeon: Initializing kernel modesetting.
[ 49.695034] [drm] register mmio base: 0xFF5F0000
[ 49.695036] [drm] register mmio size: 65536
[ 49.696123] ATOM BIOS: RADEON
[ 49.696349] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 49.696363] [drm] Generation 2 PCI interface, using max accessible memory
[ 49.696371] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 49.696390] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 49.696468] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 49.696489] [drm] radeon: VRAM 128M
[ 49.696491] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 49.696492] [drm] radeon: GTT 256M
[ 49.696494] [drm] radeon: GTT from 0xD0000000 to 0xDFFFFFFF
[ 49.696530] [drm] radeon: irq initialized.
[ 49.697053] [drm] Detected VRAM RAM=128M, BAR=128M
[ 49.697058] [drm] RAM width 256bits DDR
[ 49.697163] [TTM] Zone kernel: Available graphics memory: 436928 kiB.
[ 49.697166] [TTM] Zone highmem: Available graphics memory: 1030692 kiB.
[ 49.697186] [drm] radeon: 128M of VRAM memory ready
[ 49.697188] [drm] radeon: 256M of GTT memory ready.
[ 49.697227] [drm] radeon: 2 quad pipes, 1 z pipes initialized.
[ 49.697235] [drm] radeon: cp idle (0x10000C03)
[ 49.697277] [drm] Loading R400 Microcode
[ 49.697281] platform radeon_cp.0: firmware: requesting radeon/R420_cp.bin
[ 49.703333] [drm] radeon: ring at 0x00000000D0000000
[ 49.703353] [drm] ring test succeeded in 1 usecs
[ 49.707851] [drm] radeon: ib pool ready.
[ 49.707916] [drm] ib test succeeded in 0 usecs
[ 49.707945] [drm] Default TV standard: NTSC
[ 49.708013] [drm] Default TV standard: NTSC
[ 49.708073] [drm] Radeon Display Connectors
[ 49.708075] [drm] Connector 0:
[ 49.708077] [drm] VGA
[ 49.708079] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 49.708081] [drm] Encoders:
[ 49.708083] [drm] CRT1: INTERNAL_DAC1
[ 49.708084] [drm] Connector 1:
[ 49.708086] [drm] S-video
[ 49.708087] [drm] Encoders:
[ 49.708089] [drm] TV1: INTERNAL_DAC2
[ 49.708090] [drm] Connector 2:
[ 49.708092] [drm] DVI-I
[ 49.708093] [drm] HPD1
[ 49.708095] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 49.708097] [drm] Encoders:
[ 49.708099] [drm] CRT2: INTERNAL_DAC2
[ 49.708100] [drm] DFP1: INTERNAL_TMDS1
[ 49.905456] [drm] fb mappable at 0xB0040000
[ 49.905458] [drm] vram apper at 0xB0000000
[ 49.905460] [drm] size 5242880
[ 49.905461] [drm] fb depth is 24
[ 49.905463] [drm] pitch is 5120
[ 49.905524] fb0: radeondrmfb frame buffer device
[ 49.905525] registered panic notifier
[ 49.905530] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 49.907342] vga16fb: initializing
[ 49.907345] vga16fb: mapped to 0xc00a0000
[ 49.907351] vga16fb: not registering due to another framebuffer present
[ 50.041849] Console: switching to colour frame buffer device 160x64
[ 54.083621] xor: automatically using best checksumming function: pIII_sse
[ 54.101008] pIII_sse : 6585.000 MB/sec
[ 54.101011] xor: using function: pIII_sse (6585.000 MB/sec)
[ 54.103819] device-mapper: dm-raid45: initialized v0.2594b
[ 55.810586] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 55.856859] ISO 9660 Extensions: RRIP_1991A
[ 56.107371] aufs 2-standalone.tree-20091207
[ 56.303098] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 105.098073] udev: starting version 151
[ 108.459388] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 109.511664] parport_pc 00:05: reported by Plug and Play ACPI
[ 109.511776] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 110.121426] ppdev: user-space parallel port driver
[ 112.274882] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 113.624673] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 113.624811] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 121.647039] lp0: using parport0 (interrupt-driven).
[ 122.836011] eth0: no IPv6 routers present

***** ... web access in the liveCD you could try:
sudo apt-get update; sudo apt-get --reinstall install gparted ubiquity
to upgrade gparted and ubiquity (the installer app) from the repos...

ubuntu@ubuntu:~$ sudo apt-get update; sudo apt-get --reinstall install gparted ubiquity
Ign cdrom://Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)/ lucid/main Translation-pt_BR
Ign cdrom://Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)/ lucid/restricted Translation-pt_BR
Obter:1 http://archive.ubuntu.com lucid Release.gpg [189B]
Obter:2 http://archive.ubuntu.com/ubuntu/ lucid/main Translation-pt_BR [320kB]
Obter:3 http://archive.ubuntu.com/ubuntu/ lucid/restricted Translation-pt_BR [2680B]
Obter:4 http://archive.ubuntu.com lucid-updates Release.gpg [189B]
Ign http://archive.ubuntu.com/ubuntu/ lucid-updates/main Translation-pt_BR
Ign http://archive.ubuntu.com/ubuntu/ lucid-updates/restricted Translation-pt_BR
Obter:5 http://archive.ubuntu.com lucid Release [57,2kB]
Obter:6 http://archive.ubuntu.com lucid-updates Release [44,7kB]
Obter:7 http://archive.ubuntu.com lucid/main Packages [1386kB]
Obter:8 http://security.ubuntu.com lucid-security Release.gpg [189B]
Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-pt_BR
Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted Translation-pt_BR
Obter:9 http://security.ubuntu.com lucid-security Release [38,5kB]
Obter:10 http://security.ubuntu.com lucid-security/main Packages [66,0kB]
Obter:11 http://archive.ubuntu.com lucid/restricted Packages [6208B]
Obter:12 http://archive.ubuntu.com lucid/main Sources [659kB]
Obter:13 http://archive.ubuntu.com lucid/restricted Sources [3775B]
Obter:14 http://archive.ubuntu.com lucid-updates/main Packages [290kB]
Obter:15 http://security.ubuntu.com lucid-security/restricted Packages [14B]
Obter:16 http://security.ubuntu.com lucid-security/main Sources [20,9kB]
Obter:17 http://security.ubuntu.com lucid-security/restricted Sources [14B]
Obter:18 http://archive.ubuntu.com lucid-updates/restricted Packages [3252B]
Obter:19 http://archive.ubuntu.com lucid-updates/main Sources [104kB]
Obter:20 http://archive.ubuntu.com lucid-updates/restricted Sources [1292B]
Baixados 3003kB em 18s (162kB/s)
Lendo listas de pacotes... Pronto
Lendo listas de pacotes... Pronto
Construindo árvore de dependências
Lendo informação de estado... Pronto
Os pacotes extra a seguir serão instalados:
  bogl-bterm ubiquity-frontend-debconf ubiquity-frontend-gtk ubiquity-ubuntu-artwork
Pacotes sugeridos:
  reiser4progs kpartx
Os NOVOS pacotes a seguir serão instalados:
  bogl-bterm ubiquity-frontend-debconf
Os pacotes a seguir serão atualizados:
  gparted ubiquity ubiquity-frontend-gtk ubiquity-ubuntu-artwork
4 pacotes atualizados, 2 pacotes novos instalados, 0 a serem removidos e 279 não atualizados.
É preciso baixar 6179kB de arquivos.
Depois desta operação, 2789kB adicionais de espaço em disco serão usados.
Você quer continuar [S/n]? S
Obter:1 http://archive.ubuntu.com/ubuntu/ lucid/main bogl-bterm 0.1.18-3ubuntu4 [28,4kB]
Obter:2 http://archive.ubuntu.com/ubuntu/ lucid-updates/main gparted 0.5.1-1ubuntu3 [472kB]
Obter:3 http://archive.ubuntu.com/ubuntu/ lucid-updates/main ubiquity 2.2.25 [4032kB]
Obter:4 http://archive.ubuntu.com/ubuntu/ lucid-updates/main ubiquity-frontend-gtk 2.2.25 [143kB]
Obter:5 http://archive.ubuntu.com/ubuntu/ lucid-updates/main ubiquity-frontend-debconf 2.2.25 [899kB]
Obter:6 http://archive.ubuntu.com/ubuntu/ lucid-updates/main ubiquity-ubuntu-artwork 2.2.25 [605kB]
Baixados 6179kB em 31s (193kB/s)
Pré-configurando pacotes ...
Selecionando pacote previamente não selecionado bogl-bterm.
(Lendo banco de dados ... 129801 arquivos e diretórios atualmente instalados).
Desempacotando bogl-bterm (de .../bogl-bterm_0.1.18-3ubuntu4_i386.deb) ...
Preparando para substituir gparted 0.5.1-1ubuntu2 (usando .../gparted_0.5.1-1ubuntu3_i386.deb) ...
Desempacotando substituto gparted ...
Preparando para substituir ubiquity 2.2.24 (usando .../ubiquity_2.2.25_i386.deb) ...
Desempacotando substituto ubiquity ...
Preparando para substituir ubiquity-frontend-gtk 2.2.24 (usando .../ubiquity-frontend-gtk_2.2.25_all.deb) ...
Desempacotando substituto ubiquity-frontend-gtk ...
Selecionando pacote previamente não selecionado ubiquity-frontend-debconf.
Desempacotando ubiquity-frontend-debconf (de .../ubiquity-frontend-debconf_2.2.25_all.deb) ...
Preparando para substituir ubiquity-ubuntu-artwork 2.2.24 (usando .../ubiquity-ubuntu-artwork_2.2.25_all.deb) ...
Desempacotando substituto ubiquity-ubuntu-artwork ...
Processando gatilhos para man-db ...
Processando gatilhos para hicolor-icon-theme ...
Processando gatilhos para desktop-file-utils ...
Processando gatilhos para python-gmenu ...
Rebuilding /usr/share/applications/desktop.pt_BR.utf8.cache...
Processando gatilhos para ureadahead ...
Processando gatilhos para python-support ...
Configurando bogl-bterm (0.1.18-3ubuntu4) ...
Configurando gparted (0.5.1-1ubuntu3) ...

Configurando ubiquity-ubuntu-artwork (2.2.25) ...
Configurando ubiquity (2.2.25) ...

Processando gatilhos para python-central ...
Configurando ubiquity-frontend-debconf (2.2.25) ...
Configurando ubiquity-frontend-gtk (2.2.25) ...

Processando gatilhos para python-central ...
ubuntu@ubuntu:~$ sudo fdisk -l
ubuntu@ubuntu:~$

By now, I'm gonna wait what you think about the answers...

[ 8.188025] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)

doesn't look good. Looks like the drive may be having issues. I suggest you grab the ultimate boot cd and check the drive is healthy