Comment 56 for bug 658521

I've the the same problem...

The PCIe adapter has 2 IDE HDD's connected and both aren't recognised...

 lspci -nn
***********
02:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller [1b4b:9123] (rev 11)
02:00.1 IDE interface [0101]: Marvell Technology Group Ltd. Device [1b4b:91a4] (rev 11)

 lspci -vk
***********
02:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 11) (prog-if 01 [AHCI 1.0])
 Subsystem: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller
 Flags: bus master, fast devsel, latency 0, IRQ 78
 I/O ports at d090 [size=8]
 I/O ports at d080 [size=4]
 I/O ports at d070 [size=8]
 I/O ports at d060 [size=4]
 I/O ports at d050 [size=16]
 Memory at fe921000 (32-bit, non-prefetchable) [size=2K]
 Expansion ROM at fe910000 [disabled] [size=64K]
 Capabilities: <access denied>
 Kernel driver in use: ahci
 Kernel modules: ahci

02:00.1 IDE interface: Marvell Technology Group Ltd. Device 91a4 (rev 11) (prog-if 8f [Master SecP SecO PriP PriO])
 Subsystem: Marvell Technology Group Ltd. Device 91a4
 Flags: fast devsel, IRQ 29
 I/O ports at d040 [size=8]
 I/O ports at d030 [size=4]
 I/O ports at d020 [size=8]
 I/O ports at d010 [size=4]
 I/O ports at d000 [size=16]
 Memory at fe920000 (32-bit, non-prefetchable) [size=16]
 Expansion ROM at fe900000 [disabled] [size=64K]
 Capabilities: <access denied>