Comment 24 for bug 54273

I too have the same usb issue. I have a toshiba laptop running 8.04 LTS 64 bit edition not only does my wifi not work but the 4 USB ports do not work with my thumb drive or mobile phone. However i have a built in USB camera that seems to be recognized. The Dmsg is as follows:

  395.053061] APIC error on CPU1: 00(40)
[ 395.053830] APIC error on CPU0: 00(40)
[ 680.494599] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 686.874851] usb 1-2: new high speed USB device using ehci_hcd and address 6
[ 692.442643] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 700.383035] usb 1-3: device descriptor read/64, error -110
[ 707.197979] usb 1-3: device descriptor read/64, error -110
[ 707.276424] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 713.971754] usb 1-3: device descriptor read/64, error -110
[ 720.577415] usb 1-3: device descriptor read/64, error -110
[ 720.655849] usb 1-3: new high speed USB device using ehci_hcd and address 9
[ 724.444208] usb 1-3: device not accepting address 9, error -110
[ 724.484889] usb 1-3: new high speed USB device using ehci_hcd and address 10
[ 730.422046] usb 1-3: device not accepting address 10, error -110
[ 744.426693] APIC error on CPU1: 40(40)
[ 744.428187] APIC error on CPU0: 40(40)
[ 883.423210] APIC error on CPU0: 40(40)
[ 883.421546] APIC error on CPU1: 40(40)
[ 953.627798] APIC error on CPU1: 40(40)
[ 953.629581] APIC error on CPU0: 40(40)

As i started looking through the dmseg i noticed this...

 libata version 3.00 loaded.
[ 22.690860] usbcore: registered new device driver usb
[ 22.690938] ahci 0000:00:12.0: version 3.0
[ 22.690974] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 22.691200] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 22.691206] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
[ 22.693798] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 23.690280] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode

Im green to this so please excuse me if i put info in there that shouldnt be there.

The USB ports on my desktop seem to work fine front and back. I am running 8.04 LTS x86 on there and everything seems to be running fine. I'm going to try that on here and if it works i will post the update.