Package dependencies cannot be resolved
How to solve the problem:
This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time.
Transaction failed: Package dependencies cannot be resolved
The following packages have unmet dependencies:
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu linux-hwe Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
![]() |
#1 |
Please provide the command that you issue and the full error output that you receive, including the names of the packages involved.
Revision history for this message
![]() |
#2 |
This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time.
Transaction failed: Package dependencies cannot be resolved
The following packages have unmet dependencies:
gjs: Depends: libc6 (>= 2.34) but 2.35-0ubuntu3.1 is to be installed
Depends: libgcc-s1 (>= 3.0) but 12-20220319-
Depends: libgjs0g (= 1.72.0-
Depends: libglib2.0-0 (>= 2.58.0) but 2.72.1-1 is to be installed
Depends: libstdc++6 (>= 4.1.1) but 12-20220319-
libgirepository
Revision history for this message
![]() |
#3 |
I have run the following but not yet resolved.
sudo apt-get remove google-
sudo apt-get update && sudo apt-get upgrade
sudo apt-get clean
sudo apt-get autoremove
sudo dpkg --configure -a
sudo apt-get install -f
Also I run:
sudo rm -vf /var/lib/
sudo apt-get update
Revision history for this message
![]() |
#4 |
For diagnostic purposes please provide the output that you receive for the following commands:
uname -a
lsb_release -crid
sudo dpkg --audit
apt policy gjs libc6 libffi8 libgcc-s1 libgirepository
Revision history for this message
![]() |
#5 |
Linux partha-
Distributor ID: Ubuntu
Description: Ubuntu 22.04.1 LTS
Release: 22.04
Codename: jammy
Installed: 1.64.5-
Candidate: 1.72.0-
Version table:
1.
500 http://
1.72.0-1 500
500 http://
*** 1.64.5-
100 /var/lib/
libc6:
Installed: 2.35-0ubuntu3.1
Candidate: 2.35-0ubuntu3.1
Version table:
*** 2.35-0ubuntu3.1 500
500 http://
100 /var/lib/
2.35-0ubuntu3 500
500 http://
libffi8:
Installed: 3.4.2-4
Candidate: 3.4.2-4
Version table:
*** 3.4.2-4 500
500 http://
100 /var/lib/
libgcc-s1:
Installed: 12-20220319-
Candidate: 12-20220319-
Version table:
*** 12-20220319-
500 http://
100 /var/lib/
libgirepository
Installed: 1.64.1-
Candidate: 1.72.0-1
Version table:
1.72.0-1 500
500 http://
*** 1.64.1-
100 /var/lib/
libgjs0g:
Installed: 1.64.5-
Candidate: 1.72.0-
Version table:
1.
500 http://
1.72.0-1 500
500 http://
*** 1.64.5-
100 /var/lib/
libglib2.0-0:
Installed: 2.72.1-1
Candidate: 2.72.1-1
Version table:
*** 2.72.1-1 500
500 http://
100 /var/lib/
libstdc++6:
Installed: 12-20220319-
Candidate: 12-20220319-
Version table:
*** 12-20220319-
500 http://
100 /var/lib/
Revision history for this message
![]() |
#6 |
What output do you receive for the commands
sudo apt update
sudo dpkg --audit
sudo apt full-upgrade
sudo apt install gjs libc6 libffi8 libgcc-s1 libgirepository
Remark: Whenever you post the output of a command, please include also the command that you give.
Revision history for this message
![]() |
#7 |
sudo apt update
Hit:1 http://
Hit:2 http://
Get:3 http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Get:10 http://
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Get:15 http://
Get:16 http://
Get:17 http://
Get:18 http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Get:26 http://
Get:27 http://
Get:28 http://
Get:29 http://
Get:30 http://
Fetched 3,435 kB in 7s (495 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
234 packages can be upgraded. Run 'apt list --upgradable' to see them.
sudo dpkg --audit
sudo apt full-upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
app-install-
gir1.2-cogl-1.0 gir1.2-
gir1.
libamtk-5-0 libamtk-5-common libasn1-8-heimdal libblas3
libboost-
libboost-
libcdio18 libcmis-0.5-5v5 libedataserver-
libextutils-
libgupnp-1.2-0 libhandy-0.0-0 libhcrypto4-heimdal libheimbase1-
libheimntlm0-
libimage-
liblapack3 libldap-2.4-2 libmozjs-68-0 libmpdec2 libmysqlclient21
libneon27-gnutls libntfs-3g883 liborcus-0.15-0 libperl5.30 libpoppler97
libpotrace0 libprotobuf17 libpython3.8 libpython3.8-dev libpython3.
libpython3.
libsane libsnmp35 libtepl-4-0 libtracker-
libtracker-
libwind0-heimdal libxmlb1 linux-headers-
linux-
python3-appdirs python3-bs4 python3-cssselect python3-html5lib python3-lxml
python3-numpy python3-packaging python3-scour python3-soupsieve
python3-
syslinux-common syslinux-legacy vino xul-ext-ubufox
Use 'sudo apt autoremove' to remove them.
The following packages will be REMOVED:
fuse gir1.2-mutter-6 gir1.2-unity-5.0 gnome-shell-
gvfs-bin inkscape libappindicator3-1 libgc1c2 libgsl23 libgupnp-av-1.0-2
libgupnp-
libwacom2
The following NEW packages will be installed:
fuse3 gir1.2-adw-1 gir1.2-
gir1.2-unity-7.0 gnome-bluetooth
gnome-
libadwaita-1-0 libayatana-
libayatana-
libboost-
libboost-
libdebuginfod
libfreerdp-
libgnome-
libhfstospell11 libini-config5 libipa-hbac0 libipt2 libjs-sphinxdoc
libjs-underscore libjson-perl libjson-xs-perl liblibreoffice-java
liblist-
libnfsidmap1 libnma-common libnss-sss libntfs-3g89 liborcus-0.17-0
liborcus-
libperl5.34 libpipewire-0.3-0 libpipewire-
libpython3.10 libpython3.10-dev libpython3.
libraqm0 libref-array1 libsane1 libscalar-
libsepol2 libsnmp40 libsource-
libspa-
libstring-
libtss2-tcti-cmd0 libtss2-
libtss2-
linux-
linux-
linux-
linux-
perl-modules-5.34 pipewire pipewire-bin pipewire-
power-
python3.
sssd-ipa sssd-krb5 sssd-krb5-common sssd-ldap sssd-proxy systemd-oomd
ure-java usrmerge xdg-desktop-
The following packages have been kept back:
libldap-2.5-0 libldap-common xdg-utils
The following packages will be upgraded:
asymptote colord duplicity eog evolution-
gedit-common gir1.2-freedesktop gir1.2-gdm-1.0 gir1.2-glib-2.0
gir1.
gnome-calendar gnome-control-
gnome-
gnome-
gnome-
gnome-
guile-2.2-libs gvfs gvfs-backends gvfs-common gvfs-daemons gvfs-fuse
gvfs-libs hplip hplip-data kio libalgorithm-
libautovivifi
libcairo-perl libclass-c3-xs-perl libclass-
libdate-
libdevel-
libebook-1.2-20 libedata-
libencode-
libencode-perl libextutils-
libfwupdplugin5 libgdm1 libgirepository
libglib-
libgnome-
libhtml-
libipc-
libkf5sonnet5
libkf5textwid
liblist-
libnet-dbus-perl libnet-ssleay-perl libnma0 libpackage-
libpadwalker-perl libparams-
libparams-
libpython3-dev libpython3-stdlib libref-util-xs-perl libreoffice-
libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw
libreoffice-gnome libreoffice-gtk3 libreoffice-
libreoffice-
libreoffice-math libreoffice-
librhythmbox-
librygel-
libsemanage-
libsub-name-perl libtalloc2 libtevent0 libtext-bibtex-perl
libtext-
libtext-
libunoil-java libvariable-
libwbclient0 libxml-libxml-perl libxml-libxslt-perl libxml-parser-perl
libxstring-perl linux-generic-
linux-
network-
printer-
python3-
python3-gdbm python3-gi python3-gi-cairo python3-ldb python3-lib2to3
python3-lxml python3-markupsafe python3-minimal python3-netifaces
python3-numpy python3-pil python3-protobuf python3-renderpm
python3-reportlab python3-
python3-uno python3-yaml remmina remmina-common remmina-plugin-rdp
remmina-
samba-libs sane-utils simple-scan sonnet-plugins texinfo thermald tracker
tracker-extract tracker-miner-fs transmission-common transmission-gtk
ubuntu-desktop ubuntu-
ubuntu-settings uno-libs-private update-notifier update-
usb-creator-
xserver-
231 upgraded, 122 newly installed, 16 to remove and 3 not upgraded.
12 standard security updates
Need to get 417 MB/417 MB of archives.
After this operation, 604 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://
Get:2 http://
Get:3 http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Get:10 http://
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Get:15 http://
Get:16 http://
Get:17 http://
Get:18 http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Get:26 http://
Get:27 http://
Get:28 http://
Get:29 http://
Get:30 http://
Get:31 http://
Get:32 http://
Get:33 http://
Get:34 http://
Get:35 http://
Get:36 http://
Get:37 http://
Get:38 http://
Get:39 http://
Get:40 http://
Get:41 http://
Get:42 http://
Get:43 http://
Get:44 http://
Get:45 http://
Get:46 http://
Get:47 http://
Get:48 http://
Get:49 http://
Get:50 http://
Get:51 http://
Get:52 http://
Get:53 http://
Get:54 http://
Get:55 http://
Get:56 http://
Get:57 http://
Get:58 http://
Get:59 http://
Get:60 http://
Get:61 http://
Get:62 http://
Get:63 http://
Get:64 http://
Get:65 http://
Get:66 http://
Get:67 http://
Get:68 http://
Get:69 http://
Get:70 http://
Get:71 http://
Get:72 http://
Get:73 http://
Get:74 http://
Get:75 http://
Get:76 http://
Get:77 http://
Get:78 http://
Get:79 http://
Get:80 http://
Get:81 http://
Get:82 http://
Get:83 http://
Get:84 http://
Get:85 http://
Get:86 http://
Get:87 http://
Get:88 http://
Get:89 http://
Get:90 http://
Get:91 http://
Get:92 http://
Get:93 http://
Get:94 http://
Get:95 http://
Get:96 http://
Get:97 http://
Get:98 http://
Get:99 http://
Get:100 http://
Get:101 http://
Get:102 http://
Get:103 http://
Get:104 http://
Get:105 http://
Get:106 http://
Get:107 http://
Get:108 http://
Get:109 http://
Get:110 http://
Get:111 http://
Get:112 http://
Get:113 http://
Get:114 http://
Get:115 http://
Get:116 http://
Get:117 http://
Get:118 http://
Get:119 http://
Get:120 http://
Get:121 http://
Get:122 http://
Get:123 http://
Get:124 http://
Get:125 http://
Get:126 http://
Get:127 http://
Get:128 http://
Get:129 http://
Get:130 http://
Get:131 http://
Get:132 http://
Get:133 http://
Get:134 http://
Get:135 http://
Get:136 http://
Get:137 http://
Get:138 http://
Get:139 http://
Get:140 http://
Get:141 http://
Get:142 http://
Get:143 http://
Get:144 http://
Get:145 http://
Get:146 http://
Get:147 http://
Get:148 http://
Get:149 http://
Get:150 http://
Get:151 http://
Get:152 http://
Get:153 http://
Get:154 http://
Get:155 http://
Get:156 http://
Get:157 http://
Get:158 http://
Get:159 http://
Get:160 http://
Get:161 http://
Get:162 http://
Get:163 http://
Get:164 http://
Get:165 http://
Get:166 http://
Get:167 http://
Get:168 http://
Get:169 http://
Get:170 http://
Get:171 http://
Get:172 http://
Get:173 http://
Get:174 http://
Get:175 http://
Get:176 http://
Get:177 http://
Get:178 http://
Get:179 http://
Get:180 http://
Get:181 http://
Get:182 http://
Get:183 http://
Get:184 http://
Get:185 http://
Get:186 http://
Get:187 http://
Get:188 http://
Get:189 http://
Get:190 http://
Get:191 http://
Get:192 http://
Get:193 http://
Get:194 http://
Get:195 http://
Get:196 http://
Get:197 http://
Get:198 http://
Get:199 http://
Get:200 http://
Get:201 http://
Get:202 http://
Get:203 http://
Get:204 http://
Get:205 http://
Get:206 http://
Get:207 http://
Get:208 http://
Get:209 http://
Get:210 http://
Get:211 http://
Get:212 http://
Get:213 http://
Get:214 http://
Get:215 http://
Get:216 http://
Get:217 http://
Get:218 http://
Get:219 http://
Get:220 http://
Get:221 http://
Get:222 http://
Get:223 http://
Get:224 http://
Get:225 http://
Get:226 http://
Get:227 http://
Get:228 http://
Get:229 http://
Get:230 http://
Get:231 http://
Get:232 http://
Get:233 http://
Get:234 http://
Get:235 http://
Get:236 http://
Get:237 http://
Get:238 http://
Get:239 http://
Get:240 http://
Get:241 http://
Get:242 http://
Get:243 http://
Get:244 http://
Get:245 http://
Get:246 http://
Get:247 http://
Get:248 http://
Get:249 http://
Get:250 http://
Get:251 http://
Get:252 http://
Get:253 http://
Get:254 http://
Get:255 http://
Get:256 http://
Get:257 http://
Get:258 http://
Get:259 http://
Get:260 http://
Get:261 http://
Get:262 http://
Get:263 http://
Get:264 http://
Get:265 http://
Get:266 http://
Get:267 http://
Get:268 http://
Get:269 http://
Get:270 http://
Get:271 http://
Get:272 http://
Get:273 http://
Get:274 http://
Get:275 http://
Get:276 http://
Get:277 http://
Get:278 http://
Get:279 http://
Get:280 http://
Get:281 http://
Get:282 http://
Get:283 http://
Get:284 http://
Get:285 http://
Get:286 http://
Get:287 http://
Get:288 http://
Get:289 http://
Get:290 http://
Get:291 http://
Get:292 http://
Get:293 http://
Get:294 http://
Get:295 http://
Get:296 http://
Get:297 http://
Get:298 http://
Get:299 http://
Get:300 http://
Get:301 http://
Get:302 http://
Get:303 http://
Get:304 http://
Get:305 http://
Get:306 http://
Get:307 http://
Get:308 http://
Get:309 http://
Get:310 http://
Get:311 http://
Get:312 http://
Get:313 http://
Get:314 http://
Get:315 http://
Get:316 http://
Get:317 http://
Get:318 http://
Get:319 http://
Get:320 http://
Get:321 http://
Get:322 http://
Get:323 http://
Get:324 http://
Get:325 http://
Get:326 http://
Get:327 http://
Get:328 http://
Get:329 http://
Get:330 http://
Get:331 http://
Get:332 http://
Get:333 http://
Get:334 http://
Get:335 http://
Get:336 http://
Get:337 http://
Get:338 http://
Get:339 http://
Get:340 http://
Get:341 http://
Get:342 http://
Get:343 http://
Get:344 http://
Get:345 http://
Get:346 http://
Get:347 http://
Get:348 http://
Get:349 http://
Get:350 http://
Get:351 http://
Fetched 417 MB in 9min 13s (753 kB/s)
Extracting templates from packages: 100%
Preconfiguring packages ...
(Reading database ... 453129 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking libalgorithm-
Preparing to unpack .../01-
Unpacking texinfo (6.8-4build1) over (6.7.0.dfsg.2-5) ...
Preparing to unpack .../02-
Unpacking libxstring-perl (0.005-1build2) over (0.002-2) ...
Preparing to unpack .../03-
Unpacking libxml-
Preparing to unpack .../04-
Unpacking libxml-libxslt-perl (1.99-1build2) over (1.99-1) ...
Preparing to unpack .../05-
deb ...
update-
with priority 50...
update-
ority 50...
update-
Replacing config file /etc/perl/
Unpacking libxml-libxml-perl (2.0207+
ild1) ...
Preparing to unpack .../06-
Unpacking libvariable-
Preparing to unpack .../07-
deb ...
Unpacking libunicode-
uild1) ...
Preparing to unpack .../08-
Unpacking libtext-iconv-perl (1.7-7build3) over (1.7-7) ...
Preparing to unpack .../09-
Unpacking libencode-
Preparing to unpack .../10-
Unpacking libtext-
Preparing to unpack .../11-
Unpacking libtext-
Preparing to unpack .../12-
Unpacking libtext-bibtex-perl (0.88-3build3) over (0.88-3build1) ...
Preparing to unpack .../13-
Unpacking libsub-name-perl (0.26-1build3) over (0.26-1) ...
Preparing to unpack .../14-
Unpacking libsub-
Preparing to unpack .../15-
Unpacking libsort-key-perl (1.33-2build5) over (1.33-2build2) ...
Preparing to unpack .../16-
Unpacking libref-util-xs-perl (0.117-1build5) over (0.117-1build2) ...
Preparing to unpack .../17-
.
Unpacking libperlio-
Preparing to unpack .../18-
Unpacking libparams-
Preparing to unpack .../19-
Unpacking libparams-util-perl (1.102-1build3) over (1.07-3build5) ...
Preparing to unpack .../20-
Unpacking libparams-
Preparing to unpack .../21-
Unpacking libpadwalker-perl (2.5-1build2) over (2.3-1build2) ...
Preparing to unpack .../22-
Unpacking libpackage-
Preparing to unpack .../23-
Unpacking perl-openssl-
Preparing to unpack .../24-
Unpacking libnet-
Preparing to unpack .../25-
Unpacking libnet-dbus-perl (1.2.0-1build3) over (1.2.0-1) ...
Preparing to unpack .../26-
Unpacking perl (5.34.0-3ubuntu1) over (5.30.0-9ubuntu0.2) ...
Selecting previously unselected package perl-modules-5.34.
Preparing to unpack .../27-
Unpacking perl-modules-5.34 (5.34.0-3ubuntu1) ...
Selecting previously unselected package libperl5.34:amd64.
Preparing to unpack .../28-
Unpacking libperl5.34:amd64 (5.34.0-3ubuntu1) ...
Preparing to unpack .../29-
Unpacking perl-base (5.34.0-3ubuntu1) over (5.30.0-9ubuntu0.2) ...
Setting up perl-base (5.34.0-3ubuntu1) ...
(Reading database ... 455086 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking liblocale-
Preparing to unpack .../01-
Unpacking liblist-
Preparing to unpack .../02-
Unpacking liblist-
Selecting previously unselected package liblist-
Preparing to unpack .../03-
Unpacking liblist-
Preparing to unpack .../04-
_amd64.deb ...
Unpacking libimage-
3+dfsg-
Preparing to unpack .../05-
Unpacking libhtml-
Preparing to unpack .../06-
Unpacking libglib-perl:amd64 (3:1.329.3-2build1) over (3:1.329.2-1) ...
Selecting previously unselected package libmozjs-
Preparing to unpack .../07-
Unpacking libmozjs-91-0:amd64 (91.10.0-0ubuntu1) ...
Selecting previously unselected package gir1.2-
Preparing to unpack .../08-
Unpacking gir1.2-
Selecting previously unselected package libadwaita-
Preparing to unpack .../09-
Unpacking libadwaita-
Selecting previously unselected package gir1.2-adw-1:amd64.
Preparing to unpack .../10-
Unpacking gir1.2-adw-1:amd64 (1.1.0-1ubuntu2) ...
Selecting previously unselected package gnome-bluetooth
Preparing to unpack .../11-
Unpacking gnome-bluetooth
Selecting previously unselected package libgnome-
Preparing to unpack .../12-
Unpacking libgnome-
dpkg: gnome-shell-
way as you requested:
ubuntu-
ubuntu-desktop depends on gnome-shell-
(Reading database ... 455209 files and directories currently installed.)
Removing gnome-shell-
(Reading database ... 455193 files and directories currently installed.)
Preparing to unpack .../00-
all.deb ...
Unpacking gnome-shell-
~20.04.1) ...
dpkg: considering deconfiguration of yaru-theme-
en by installation of gnome-shell ...
dpkg: yes, will deconfigure yaru-theme-
Preparing to unpack .../01-
De-configuring yaru-theme-
me-shell (42.4-0ubuntu0.
Unpacking gnome-shell (42.4-0ubuntu0.
Preparing to unpack .../02-
Unpacking yaru-theme-
Selecting previously unselected package gir1.2-
Preparing to unpack .../03-
Unpacking gir1.2-
Preparing to unpack .../04-
Unpacking libedata-
Preparing to unpack .../05-
Unpacking libedata-
.
Preparing to unpack .../06-
Unpacking libebackend-
Preparing to unpack .../07-
Unpacking evolution-
Preparing to unpack .../08-
Unpacking gnome-calendar (41.2-3) over (3.36.2-0ubuntu1) ...
Preparing to unpack .../09-
Unpacking libgweather-
.
Preparing to unpack .../10-
Unpacking gir1.2-
...
Preparing to unpack .../11-
Unpacking gsettings-
Preparing to unpack .../12-
ll.deb ...
Unpacking gnome-control-
untu4) ...
Selecting previously unselected package libfreerdp-
Preparing to unpack .../13-
...
Unpacking libfreerdp-
Selecting previously unselected package libspa-
Preparing to unpack .../14-
Unpacking libspa-
Selecting previously unselected package libpipewire-
Preparing to unpack .../15-
Unpacking libpipewire-
Selecting previously unselected package libvncserver1:
Preparing to unpack .../16-
Unpacking libvncserver1:amd64 (0.9.13+
Preparing to unpack .../17-
...
Unpacking xdg-desktop-portal (1.14.4-
Selecting previously unselected package libntfs-3g89.
Preparing to unpack .../18-
Unpacking libntfs-3g89 (1:2021.
dpkg: fuse: dependency problems, but removing anyway as you requested:
ntfs-3g depends on fuse.
gvfs-fuse depends on fuse.
(Reading database ... 455515 files and directories currently installed.)
Removing fuse (2.9.9-5ubuntu3) ...
update-initramfs: deferring update (trigger activated)
Selecting previously unselected package fuse3.
(Reading database ... 455505 files and directories currently installed.)
Preparing to unpack .../fuse3_
Unpacking fuse3 (3.10.5-1build1) ...
Setting up fuse3 (3.10.5-1build1) ...
Installing new version of config file /etc/fuse.conf ...
update-initramfs: deferring update (trigger activated)
(Reading database ... 455517 files and directories currently installed.)
Preparing to unpack .../0-ntfs-
Unpacking ntfs-3g (1:2021.
Preparing to unpack .../1-gvfs-
Unpacking gvfs-backends (1.48.2-0ubuntu1) over (1.44.1-1ubuntu1.1) ...
Preparing to unpack .../2-gvfs-
Unpacking gvfs-daemons (1.48.2-0ubuntu1) over (1.44.1-1ubuntu1.1) ...
Preparing to unpack .../3-gvfs-
Unpacking gvfs-libs:amd64 (1.48.2-0ubuntu1) over (1.44.1-1ubuntu1.1) ...
Selecting previously unselected package gnome-shell-
Preparing to unpack .../4-gnome-
.deb ...
Unpacking gnome-shell-
Preparing to unpack .../5-ubuntu-
Unpacking ubuntu-desktop (1.481) over (1.450.2) ...
Preparing to unpack .../6-ubuntu-
Unpacking ubuntu-
(Reading database ... 455546 files and directories currently installed.)
Removing gvfs-bin (1.44.1-1ubuntu1.1) ...
(Reading database ... 455525 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking gvfs-common (1.48.2-0ubuntu1) over (1.44.1-1ubuntu1.1) ...
Preparing to unpack .../01-
Unpacking gvfs:amd64 (1.48.2-0ubuntu1) over (1.44.1-1ubuntu1.1) ...
Preparing to unpack .../02-
Unpacking gvfs-fuse (1.48.2-0ubuntu1) over (1.44.1-1ubuntu1.1) ...
Selecting previously unselected package libpipewire-
Preparing to unpack .../03-
Unpacking libpipewire-
Selecting previously unselected package pipewire-bin.
Preparing to unpack .../04-
Unpacking pipewire-bin (0.3.48-1ubuntu1) ...
Selecting previously unselected package pipewire:amd64.
Preparing to unpack .../05-
Unpacking pipewire:amd64 (0.3.48-1ubuntu1) ...
Selecting previously unselected package pipewire-
Preparing to unpack .../06-
Unpacking pipewire-
Preparing to unpack .../07-
deb ...
Unpacking gnome-control-
) ...
Selecting previously unselected package gnome-remote-
Preparing to unpack .../08-
Unpacking gnome-remote-
Preparing to unpack .../09-
...
Unpacking gnome-settings-
) ...
Preparing to unpack .../10-
Unpacking gir1.2-
.
Preparing to unpack .../11-
.
Unpacking gnome-startup-
Preparing to unpack .../12-
Unpacking gdm3 (42.0-1ubuntu7) over (3.36.3-
dpkg: warning: unable to delete old directory '/var/lib/
ctory not empty
dpkg: warning: unable to delete old directory '/var/lib/
not empty
dpkg: warning: unable to delete old directory '/var/lib/
ectory not empty
dpkg: warning: unable to delete old directory '/var/lib/
not empty
dpkg: warning: unable to delete old directory '/var/lib/gdm3': Directory not emp
ty
Preparing to unpack .../13-
Unpacking gnome-session-bin (42.0-1ubuntu2) over (3.36.0-2ubuntu1) ...
Preparing to unpack .../14-
Unpacking gnome-session-
Preparing to unpack .../15-
Unpacking ubuntu-session (42.0-1ubuntu2) over (3.36.0-2ubuntu1) ...
Preparing to unpack .../16-
Unpacking libgdm1 (42.0-1ubuntu7) over (3.36.3-
Preparing to unpack .../17-
Unpacking mutter (42.2-0ubuntu1) over (3.36.9-
(Reading database ... 455676 files and directories currently installed.)
Removing gir1.2-
Removing libmutter-6-0:amd64 (3.36.9-
(Reading database ... 455651 files and directories currently installed.)
Preparing to unpack .../gnome-
Unpacking gnome-settings-
Preparing to unpack .../libwacom-
Unpacking libwacom-bin (2.2.0-1) over (1.3-2ubuntu3) ...
Preparing to unpack .../libinput-
Unpacking libinput-bin (1.20.0-1ubuntu0.1) over (1.15.5-1ubuntu0.3) ...
dpkg: libwacom2:amd64: dependency problems, but removing anyway as you requested
:
libinput10:amd64 depends on libwacom2 (>= 1.1).
(Reading database ... 455665 files and directories currently installed.)
Removing libwacom2:amd64 (1.3-2ubuntu3) ...
(Reading database ... 455660 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking libwacom-common (2.2.0-1) over (1.3-2ubuntu3) ...
Selecting previously unselected package libwacom9:amd64.
Preparing to unpack .../01-
Unpacking libwacom9:amd64 (2.2.0-1) ...
Preparing to unpack .../02-
Unpacking libinput10:amd64 (1.20.0-1ubuntu0.1) over (1.15.5-1ubuntu0.3) ...
Selecting previously unselected package libmutter-
Preparing to unpack .../03-
Unpacking libmutter-
Selecting previously unselected package gir1.2-
Preparing to unpack .../04-
Unpacking gir1.2-
Preparing to unpack .../05-
Unpacking gnome-shell-common (42.4-0ubuntu0.
.2) ...
Selecting previously unselected package gstreamer1.
Preparing to unpack .../06-
Unpacking gstreamer1.
Preparing to unpack .../07-
Unpacking gjs (1.72.0-
Preparing to unpack .../08-
Unpacking gir1.2-
Preparing to unpack .../09-
Unpacking libgjs0g:amd64 (1.72.0-
) ...
Selecting previously unselected package libpython3.
Preparing to unpack .../10-
Unpacking libpython3.
Selecting previously unselected package python3.10-minimal.
Preparing to unpack .../11-
Unpacking python3.10-minimal (3.10.4-3ubuntu0.1) ...
Setting up libpython3.
Setting up python3.10-minimal (3.10.4-3ubuntu0.1) ...
(Reading database ... 456100 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking python3-minimal (3.10.4-0ubuntu2) over (3.8.2-0ubuntu2) ...
Selecting previously unselected package libmpdec3:amd64.
Preparing to unpack .../01-
Unpacking libmpdec3:amd64 (2.5.1-2build2) ...
Preparing to unpack .../02-
Unpacking python3-gdbm:amd64 (3.10.4-0ubuntu1) over (3.8.10-
Preparing to unpack .../03-
Unpacking python3-distutils (3.10.4-0ubuntu1) over (3.8.10-
Preparing to unpack .../04-
Unpacking python3-lib2to3 (3.10.4-0ubuntu1) over (3.8.10-
Selecting previously unselected package libpython3.
Preparing to unpack .../05-
Unpacking libpython3.
Selecting previously unselected package python3.10.
Preparing to unpack .../06-
Unpacking python3.10 (3.10.4-3ubuntu0.1) ...
Preparing to unpack .../07-
Unpacking libpython3-
Preparing to unpack .../08-
Unpacking rhythmbox (3.4.4-5ubuntu1) over (3.4.4-1ubuntu2) ...
Preparing to unpack .../09-
Unpacking librhythmbox-
Preparing to unpack .../10-
Unpacking gir1.2-rb-3.0:amd64 (3.4.4-5ubuntu1) over (3.4.4-1ubuntu2) ...
Preparing to unpack .../11-
Unpacking rhythmbox-plugins (3.4.4-5ubuntu1) over (3.4.4-1ubuntu2) ...
Preparing to unpack .../12-
Unpacking python3-yaml (5.4.1-1ubuntu1) over (5.3.1-1ubuntu0.1) ...
Preparing to unpack .../13-
d64.deb ...
Unpacking libuno-
tu0.20.04.4) ...
Preparing to unpack .../14-
...
Unpacking uno-libs-private (1:7.3.
04.4) ...
Preparing to unpack .../15-
...
Unpacking libreoffice-calc (1:7.3.
04.4) ...
Preparing to unpack .../16-
...
Unpacking libreoffice-draw (1:7.3.
04.4) ...
Preparing to unpack .../17-
deb ...
Unpacking libreoffice-impress (1:7.3.
20.04.4) ...
Preparing to unpack .../18-
...
Unpacking libreoffice-math (1:7.3.
04.4) ...
Preparing to unpack .../19-
eb ...
Unpacking libreoffice-writer (1:7.3.
0.04.4) ...
Preparing to unpack .../20-
...
Unpacking libreoffice-gtk3 (1:7.3.
04.4) ...
Preparing to unpack .../21-
b ...
Unpacking libreoffice-gnome (1:7.3.
.04.4) ...
Preparing to unpack .../22-
...
Unpacking libreoffice-core (1:7.3.
04.4) ...
Preparing to unpack .../23-
Unpacking ure (1:7.3.
Selecting previously unselected package ure-java.
Preparing to unpack .../24-
Unpacking ure-java (1:7.3.
Preparing to unpack .../25-
Unpacking libjuh-java (1:7.3.
...
Preparing to unpack .../26-
Unpacking libjurt-java (1:7.3.
) ...
Preparing to unpack .../27-
l.deb ...
Unpacking libreoffice-
tu0.20.04.4) ...
Preparing to unpack .../28-
Unpacking libunoil-java (1:7.3.
4) ...
Preparing to unpack .../29-
Unpacking libridl-java (1:7.3.
) ...
Selecting previously unselected package liblibreoffice-
Preparing to unpack .../30-
b ...
Unpacking liblibreoffice-java (1:7.3.
Selecting previously unselected package libboost-
Preparing to unpack .../31-
Unpacking libboost-
Selecting previously unselected package libboost-
Preparing to unpack .../32-
Unpacking libboost-
Selecting previously unselected package libboost-
Preparing to unpack .../33-
...
Unpacking libboost-
Selecting previously unselected package libboost-
Preparing to unpack .../34-
..
Unpacking libboost-
Selecting previously unselected package liborcus-
Preparing to unpack .../35-
Unpacking liborcus-
Selecting previously unselected package liborcus-
Preparing to unpack .../36-
Unpacking liborcus-
Preparing to unpack .../37-
4.deb ...
Unpacking libreoffice-
0.20.04.4) ...
Preparing to unpack .../38-
l.deb ...
Unpacking libreoffice-
tu0.20.04.4) ...
Preparing to unpack .../39-
.deb ...
Unpacking libreoffice-
u0.20.04.4) ...
Preparing to unpack .../40-
l.deb ...
Unpacking libreoffice-
tu0.20.04.4) ...
Preparing to unpack .../41-
Unpacking python3-uno (1:7.3.
...
Preparing to unpack .../42-
...
Unpacking libreoffice-common (1:7.3.
0.04.4) ...
Selecting previously unselected package libpython3.
Preparing to unpack .../43-
Unpacking libpython3.10:amd64 (3.10.4-3ubuntu0.1) ...
Preparing to unpack .../44-
Unpacking libtalloc2:amd64 (2.3.3-2build1) over (2.3.1-
Preparing to unpack .../45-
Unpacking python3-
Preparing to unpack .../46-
Unpacking python3-systemd (234-3ubuntu2) over (234-3build2) ...
Preparing to unpack .../47-
Unpacking python3-
Preparing to unpack .../48-
Unpacking python3-
Preparing to unpack .../49-
Unpacking python3-protobuf (3.12.4-1ubuntu7) over (3.6.1.3-2ubuntu5) ...
Selecting previously unselected package libraqm0:amd64.
Preparing to unpack .../50-
Unpacking libraqm0:amd64 (0.7.0-4ubuntu1) ...
Preparing to unpack .../51-
Unpacking python3-pil:amd64 (9.0.1-1build1) over (7.0.0-4ubuntu0.5) ...
Preparing to unpack .../52-
Unpacking python3-numpy (1:1.21.5-1build2) over (1:1.17.4-5ubuntu3) ...
Preparing to unpack .../53-
Unpacking python3-
Preparing to unpack .../54-
Unpacking python3-markupsafe (2.0.1-2build1) over (1.1.0-1build2) ...
Preparing to unpack .../55-
Unpacking python3-lxml:amd64 (4.8.0-1build1) over (4.5.0-1ubuntu0.5) ...
Preparing to unpack .../56-
Unpacking libldb2:amd64 (2:2.4.
Preparing to unpack .../57-
Unpacking python3-ldb (2:2.4.
Preparing to unpack .../58-
Unpacking python3-gi-cairo (3.42.1-0ubuntu1) over (3.36.0-1) ...
Selecting previously unselected package libpython3.
Preparing to unpack .../59-
Unpacking libpython3.
Preparing to unpack .../60-
Unpacking libpython3-
Selecting previously unselected package python3.10-dev.
Preparing to unpack .../61-
Unpacking python3.10-dev (3.10.4-3ubuntu0.1) ...
Selecting previously unselected package libjs-underscore.
Preparing to unpack .../62-
Unpacking libjs-underscore (1.13.2~dfsg-2) ...
Selecting previously unselected package libjs-sphinxdoc.
Preparing to unpack .../63-
Unpacking libjs-sphinxdoc (4.3.2-1) ...
Setting up python3-minimal (3.10.4-0ubuntu2) ...
(Reading database ... 456519 files and directories currently installed.)
Preparing to unpack .../00-
running python pre-rtupdate hooks for python3.10...
Unpacking python3 (3.10.4-0ubuntu2) over (3.8.2-0ubuntu2) ...
Preparing to unpack .../01-
Unpacking python3-dev (3.10.4-0ubuntu2) over (3.8.2-0ubuntu2) ...
Preparing to unpack .../02-
Unpacking python3-dbus (1.2.18-3build1) over (1.2.16-1build1) ...
Preparing to unpack .../03-
Unpacking python3-cups:amd64 (2.0.1-5build1) over (1.9.73-3build1) ...
Preparing to unpack .../04-
Unpacking python3-
Preparing to unpack .../05-
Unpacking python3-cairo:amd64 (1.20.1-3build1) over (1.16.2-2ubuntu2) ...
Preparing to unpack .../06-
Unpacking python3-
Preparing to unpack .../07-
Unpacking python3-apt (2.3.0ubuntu2.1) over (2.0.0ubuntu0.
Preparing to unpack .../08-
Unpacking hplip-data (3.21.12+dfsg0-1) over (3.20.3+dfsg0-2) ...
Selecting previously unselected package libsnmp40:amd64.
Preparing to unpack .../09-
Unpacking libsnmp40:amd64 (5.9.1+
Preparing to unpack .../10-
Unpacking libhpmud0:amd64 (3.21.12+dfsg0-1) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../11-
Unpacking libsane-hpaio:amd64 (3.21.12+dfsg0-1) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../12-
Unpacking printer-
Preparing to unpack .../13-
Unpacking hplip (3.21.12+dfsg0-1) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../14-
Unpacking duplicity (0.8.21-1build1) over (0.8.11.1612-1) ...
Preparing to unpack .../15-
Unpacking python3-gi (3.42.1-0ubuntu1) over (3.36.0-1) ...
Preparing to unpack .../16-
4.deb ...
Unpacking libglib-
) ...
Preparing to unpack .../17-
Unpacking libgirepository
..
Preparing to unpack .../18-
Unpacking libfile-
Preparing to unpack .../19-
Unpacking libencode-
Preparing to unpack .../20-
Unpacking libencode-
Preparing to unpack .../21-
Unpacking libencode-
Preparing to unpack .../22-
Unpacking libdevel-
Preparing to unpack .../23-
Unpacking libdevel-
Preparing to unpack .../24-
.
Unpacking libdevel-
Preparing to unpack .../25-
Unpacking libdatetime-
Preparing to unpack .../26-
Unpacking libdate-simple-perl (3.0300-3build2) over (3.0300-2build1) ...
Preparing to unpack .../27-
Unpacking libclone-perl (0.45-1build3) over (0.43-2) ...
Preparing to unpack .../28-
Unpacking libclass-
Preparing to unpack .../29-
Unpacking libclass-c3-xs-perl (0.15-1build2) over (0.14-1build5) ...
Preparing to unpack .../30-
Unpacking libcairo-perl:amd64 (1.109-2build1) over (1.107-1) ...
Preparing to unpack .../31-
Unpacking libcairo-
Preparing to unpack .../32-
Unpacking libb-hooks-
Preparing to unpack .../33-
Unpacking libautovivifica
Selecting previously unselected package libscalar-
Preparing to unpack .../34-
Unpacking libscalar-
Preparing to unpack .../35-
Unpacking libextutils-
Preparing to unpack .../36-
Unpacking gir1.2-
Preparing to unpack .../37-
Unpacking gir1.2-
Preparing to unpack .../38-
Unpacking libebook-
Preparing to unpack .../39-
Unpacking libpeas-1.0-0:amd64 (1.32.0-1) over (1.26.0-2) ...
Preparing to unpack .../40-
Unpacking python3-reportlab (3.6.8-1) over (3.5.34-1ubuntu1) ...
Preparing to unpack .../41-
Unpacking libsane:amd64 (1.1.1-5) over (1.0.29-0ubuntu5.2) ...
dpkg: considering deconfiguration of sane-utils, which would be broken by instal
lation of libsane-common ...
dpkg: yes, will deconfigure sane-utils (broken by libsane-common)
Preparing to unpack .../42-
De-configuring sane-utils (1.0.29-
common (1.1.1-5) ...
Unpacking libsane-common (1.1.1-5) over (1.0.29-0ubuntu5.2) ...
Replacing files in old package sane-utils (1.0.29-0ubuntu5.2) ...
Preparing to unpack .../43-
Unpacking sane-utils (1.1.1-5) over (1.0.29-0ubuntu5.2) ...
Selecting previously unselected package libsane1:amd64.
Preparing to unpack .../44-
Unpacking libsane1:amd64 (1.1.1-5) ...
Preparing to unpack .../45-
Unpacking libtevent0:amd64 (0.11.0-1build1) over (0.10.2-
Preparing to unpack .../46-
Unpacking libsmbclient:amd64 (2:4.15.
untu1.20.04.1) ...
Preparing to unpack .../47-
Unpacking samba-libs:amd64 (2:4.15.
tu1.20.04.1) ...
Preparing to unpack .../48-
Unpacking libwbclient0:amd64 (2:4.15.
untu1.20.04.1) ...
Preparing to unpack .../49-
Unpacking gedit (41.0-3) over (3.36.2-0ubuntu1) ...
Preparing to unpack .../50-
Unpacking nautilus-data (1:42.2-0ubuntu1) over (1:3.36.
Preparing to unpack .../51-
Unpacking nautilus (1:42.2-0ubuntu1) over (1:3.36.
Preparing to unpack .../52-
..
Unpacking libnautilus-
1.20.04.1) ...
Preparing to unpack .../53-
Unpacking rygel (0.40.3-1ubuntu2) over (0.38.3-1ubuntu1) ...
Preparing to unpack .../54-
Unpacking tracker-miner-fs (3.3.0-1) over (2.3.3-
Preparing to unpack .../55-
Unpacking tracker-extract (3.3.0-1) over (2.3.3-
Preparing to unpack .../56-
Unpacking librygel-
...
Preparing to unpack .../57-
Unpacking librygel-
..
(Reading database ... 456692 files and directories currently installed.)
Removing libgupnp-av-1.0-2 (0.12.11-2) ...
Selecting previously unselected package libgupnp-av-1.0-3.
(Reading database ... 456680 files and directories currently installed.)
Preparing to unpack .../libgupnp-
Unpacking libgupnp-av-1.0-3 (0.14.0-3) ...
(Reading database ... 456692 files and directories currently installed.)
Removing libgupnp-dlna-2.0-3 (0.10.5-4) ...
Selecting previously unselected package libgupnp-
(Reading database ... 456665 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking libgupnp-dlna-2.0-4 (0.12.0-3) ...
Preparing to unpack .../01-
Unpacking tracker (3.3.0-1) over (2.3.6-0ubuntu1) ...
Preparing to unpack .../02-
Unpacking gedit-common (41.0-3) over (3.36.2-0ubuntu1) ...
Preparing to unpack .../03-
Unpacking gnome-desktop3-data (42.4-0ubuntu1) over (42.2-0ubuntu1) ...
Preparing to unpack .../04-
Unpacking libgnome-
Preparing to unpack .../05-
Unpacking ubuntu-settings (22.04.6) over (20.04.6) ...
Selecting previously unselected package libayatana-
Preparing to unpack .../06-
Unpacking libayatana-
Selecting previously unselected package libayatana-
Preparing to unpack .../07-
Unpacking libayatana-
Preparing to unpack .../08-
Unpacking transmission-gtk (3.00-2ubuntu2) over (2.94-2ubuntu3) ...
Preparing to unpack .../09-
Unpacking transmission-common (3.00-2ubuntu2) over (2.94-2ubuntu3) ...
Preparing to unpack .../10-
Unpacking remmina-
.
Preparing to unpack .../11-
Unpacking remmina-
.
Preparing to unpack .../12-
Unpacking remmina-
...
Preparing to unpack .../13-
Unpacking remmina (1.4.25+dfsg-1) over (1.4.2+
Preparing to unpack .../14-
Unpacking remmina-common (1.4.25+dfsg-1) over (1.4.2+
Preparing to unpack .../15-
Unpacking network-
Selecting previously unselected package libnma-common.
Preparing to unpack .../16-
Unpacking libnma-common (1.8.34-1ubuntu1) ...
Preparing to unpack .../17-
Unpacking libnma0:amd64 (1.8.34-1ubuntu1) over (1.8.24-1ubuntu3) ...
dpkg: libappindicator3-1: dependency problems, but removing anyway as you reques
ted:
update-notifier depends on libappindicator3-1 (>= 0.2.92).
(Reading database ... 456727 files and directories currently installed.)
Removing libappindicator3-1 (12.10.
Selecting previously unselected package libayatana-
(Reading database ... 456722 files and directories currently installed.)
Preparing to unpack .../0-libayatan
..
Unpacking libayatana-
Preparing to unpack .../1-update-
Unpacking update-notifier (3.192.54) over (3.192.30.11) ...
Preparing to unpack .../2-update-
Unpacking update-
Preparing to unpack .../3-colord_
Unpacking colord (1.4.6-1) over (1.4.4-2) ...
Preparing to unpack .../4-gir1.
Unpacking gir1.2-
Preparing to unpack .../5-usb-
Unpacking usb-creator-gtk (0.3.13) over (0.3.7) ...
(Reading database ... 456726 files and directories currently installed.)
Removing gir1.2-
Selecting previously unselected package gir1.2-
(Reading database ... 456717 files and directories currently installed.)
Preparing to unpack .../gir1.
...
Unpacking gir1.2-
(Reading database ... 456723 files and directories currently installed.)
Removing inkscape (1:1.2.
(Reading database ... 452914 files and directories currently installed.)
Preparing to unpack .../asymptote_
Unpacking asymptote (2.78+ds-2) over (2.62-1) ...
Preparing to unpack .../guile-
Unpacking guile-2.
(Reading database ... 452923 files and directories currently installed.)
Removing libgc1c2:amd64 (1:7.6.
Selecting previously unselected package libgc1:amd64.
(Reading database ... 452915 files and directories currently installed.)
Preparing to unpack .../libgc1_
Unpacking libgc1:amd64 (1:8.0.6-1.1build1) ...
Selecting previously unselected package libglew2.2:amd64.
Preparing to unpack .../libglew2.
Unpacking libglew2.2:amd64 (2.2.0-4) ...
(Reading database ... 452928 files and directories currently installed.)
Removing libgsl23:amd64 (2.5+dfsg-6build1) ...
(Reading database ... 452916 files and directories currently installed.)
Preparing to unpack .../libgslcblas
Unpacking libgslcblas0:amd64 (2.7.1+dfsg-3) over (2.5+dfsg-6build1) ...
Selecting previously unselected package libgsl27:amd64.
Preparing to unpack .../libgsl27_
Unpacking libgsl27:amd64 (2.7.1+dfsg-3) ...
Preparing to unpack .../libvoikko1_
Unpacking libvoikko1:amd64 (4.3.1-1build1) over (4.3-1build1) ...
(Reading database ... 452927 files and directories currently installed.)
Removing libhfstospell10
Selecting previously unselected package libhfstospell11
(Reading database ... 452922 files and directories currently installed.)
Preparing to unpack .../libhfstospe
Unpacking libhfstospell11
Selecting previously unselected package libsepol2:amd64.
Preparing to unpack .../libsepol2_
Unpacking libsepol2:amd64 (3.3-1build1) ...
Setting up libsepol2:amd64 (3.3-1build1) ...
(Reading database ... 452931 files and directories currently installed.)
Preparing to unpack .../libsemanage
Unpacking libsemanage-common (3.3-1build2) over (3.0-1build2) ...
Setting up libsemanage-common (3.3-1build2) ...
Selecting previously unselected package libsemanage2:amd64.
(Reading database ... 452931 files and directories currently installed.)
Preparing to unpack .../libsemanage
Unpacking libsemanage2:amd64 (3.3-1build2) ...
Setting up libsemanage2:amd64 (3.3-1build2) ...
(Reading database ... 452935 files and directories currently installed.)
Preparing to unpack .../passwd_
Unpacking passwd (1:4.8.1-2ubuntu2) over (1:4.8.
Setting up passwd (1:4.8.1-2ubuntu2) ...
(Reading database ... 452942 files and directories currently installed.)
Removing libsemanage1:amd64 (3.0-1build2) ...
(Reading database ... 452938 files and directories currently installed.)
Preparing to unpack .../fwupd_
Unpacking fwupd (1.7.5-3) over (1.7.5-3~20.04.1) ...
Preparing to unpack .../libfwupdplu
Unpacking libfwupdplugin5
Preparing to unpack .../libfwupd2_
Unpacking libfwupd2:amd64 (1.7.5-3) over (1.7.5-3~20.04.1) ...
Selecting previously unselected package libftdi1-2:amd64.
Preparing to unpack .../libftdi1-
Unpacking libftdi1-2:amd64 (1.5-5build3) ...
Selecting previously unselected package libflashrom1:amd64.
Preparing to unpack .../libflashrom
Unpacking libflashrom1:amd64 (1.2-5build1) ...
(Reading database ... 452950 files and directories currently installed.)
Removing libtss2-esys0 (2.3.2-1) ...
Selecting previously unselected package libtss2-mu0:amd64.
(Reading database ... 452932 files and directories currently installed.)
Preparing to unpack .../00-
Unpacking libtss2-mu0:amd64 (3.2.0-1ubuntu1) ...
Selecting previously unselected package libtss2-
Preparing to unpack .../01-
Unpacking libtss2-
Selecting previously unselected package libtss2-
Preparing to unpack .../02-
Unpacking libtss2-
Selecting previously unselected package libtss2-
Preparing to unpack .../03-
Unpacking libtss2-
Selecting previously unselected package libtss2-
Preparing to unpack .../04-
Unpacking libtss2-
Selecting previously unselected package libtss2-sys1:amd64.
Preparing to unpack .../05-
Unpacking libtss2-sys1:amd64 (3.2.0-1ubuntu1) ...
Selecting previously unselected package libtss2-
Preparing to unpack .../06-
Unpacking libtss2-
Preparing to unpack .../07-
Unpacking google-
Selecting previously unselected package libdebuginfod-
Preparing to unpack .../08-
Unpacking libdebuginfod-
Selecting previously unselected package usrmerge.
Preparing to unpack .../09-
Unpacking usrmerge (25ubuntu2) ...
Preparing to unpack .../10-
Unpacking ubuntu-minimal (1.481) over (1.450.2) ...
Preparing to unpack .../11-
Unpacking eog (42.0-1) over (3.36.3-0ubuntu1) ...
Selecting previously unselected package libdebuginfod1:
Preparing to unpack .../12-
Unpacking libdebuginfod1:
Selecting previously unselected package libipt2.
Preparing to unpack .../13-
Unpacking libipt2 (2.0.5-1) ...
Selecting previously unselected package libsource-
Preparing to unpack .../14-
.
Unpacking libsource-
Selecting previously unselected package libboost-
Preparing to unpack .../15-
Unpacking libboost-
Selecting previously unselected package libsource-
Preparing to unpack .../16-
Unpacking libsource-
Preparing to unpack .../17-
Unpacking gdb (12.0.90-0ubuntu1) over (9.2-0ubuntu1~
Selecting previously unselected package kded5.
Preparing to unpack .../18-
Unpacking kded5 (5.92.0-0ubuntu1) ...
Preparing to unpack .../19-
Unpacking libkf5sonnetcor
Preparing to unpack .../20-
Unpacking libkf5sonnet5-data (5.92.0-0ubuntu1) over (5.68.0-0ubuntu1) ...
Preparing to unpack .../21-
Unpacking libkf5sonnetui5
Preparing to unpack .../22-
Unpacking libkf5textwidge
Preparing to unpack .../23-
Unpacking libkf5textwidge
Preparing to unpack .../24-
Unpacking kio (5.92.0-0ubuntu1) over (5.68.0-0ubuntu1) ...
Selecting previously unselected package libcommon-
Preparing to unpack .../25-
Unpacking libcommon-
Preparing to unpack .../26-
Unpacking libgnome-
Selecting previously unselected package libgnome-
Preparing to unpack .../27-
Unpacking libgnome-
Selecting previously unselected package libjson-perl.
Preparing to unpack .../28-
Unpacking libjson-perl (4.04000-1) ...
Selecting previously unselected package libstring-
Preparing to unpack .../29-
Unpacking libstring-
Preparing to unpack .../30-
Unpacking libipc-
Selecting previously unselected package libtypes-
Preparing to unpack .../31-
Unpacking libtypes-
Selecting previously unselected package libjson-xs-perl.
Preparing to unpack .../32-
Unpacking libjson-xs-perl (4.030-1build3) ...
Preparing to unpack .../33-
Unpacking libkf5khtml5:amd64 (5.92.0-0ubuntu1) over (5.68.0-0ubuntu1) ...
Preparing to unpack .../34-
Unpacking libkf5khtml-data (5.92.0-0ubuntu1) over (5.68.0-0ubuntu1) ...
Preparing to unpack .../35-
Unpacking liblist-
Selecting previously unselected package libnfsidmap1:amd64.
Preparing to unpack .../36-
Unpacking libnfsidmap1:amd64 (1:2.6.1-1ubuntu1) ...
Selecting previously unselected package libpam-
Preparing to unpack .../37-
Unpacking libpam-
Selecting previously unselected package libpipewire-
Preparing to unpack .../38-
Unpacking libpipewire-
Preparing to unpack .../39-
Unpacking libtext-csv-perl (2.01-1) over (2.00-1) ...
Selecting previously unselected package linux-modules-
Preparing to unpack .../40-
b ...
Unpacking linux-modules-
Selecting previously unselected package linux-image-
Preparing to unpack .../41-
...
Unpacking linux-image-
Selecting previously unselected package linux-modules-
Preparing to unpack .../42-
d64.deb ...
Unpacking linux-modules-
Selecting previously unselected package linux-image-
Preparing to unpack .../43-
...
Unpacking linux-image-
Selecting previously unselected package linux-headers-
Preparing to unpack .../44-
Unpacking linux-headers-
Selecting previously unselected package linux-headers-
Preparing to unpack .../45-
b ...
Unpacking linux-headers-
Selecting previously unselected package linux-headers-
Preparing to unpack .../46-
b ...
Unpacking linux-headers-
Selecting previously unselected package linux-generic-
Preparing to unpack .../47-
Unpacking linux-generic-
Preparing to unpack .../48-
Unpacking linux-generic-
.
Preparing to unpack .../49-
b ...
Unpacking linux-headers-
4.16) ...
Preparing to unpack .../50-
...
Unpacking linux-image-
16) ...
Preparing to unpack .../51-
Unpacking linux-libc-
Selecting previously unselected package power-profiles-
Preparing to unpack .../52-
Unpacking power-profiles-
Selecting previously unselected package sane-airscan.
Preparing to unpack .../53-
Unpacking sane-airscan (0.99.27-1build1) ...
Preparing to unpack .../54-
Unpacking simple-scan (42.0-1) over (3.36.3-
Preparing to unpack .../55-
Unpacking sonnet-
Selecting previously unselected package systemd-oomd.
Preparing to unpack .../56-
Unpacking systemd-oomd (249.11-0ubuntu3.4) ...
Preparing to unpack .../57-
Unpacking thermald (2.4.9-1ubuntu0.1) over (2.4.9-1) ...
Preparing to unpack .../58-
Unpacking usb-creator-common (0.3.13) over (0.3.7) ...
Preparing to unpack .../59-
Unpacking xdg-desktop-
Selecting previously unselected package xdg-desktop-
Preparing to unpack .../60-
Unpacking xdg-desktop-
Preparing to unpack .../61-
Unpacking xserver-
Selecting previously unselected package libbasicobjects
Preparing to unpack .../62-
Unpacking libbasicobjects
Selecting previously unselected package libc-ares2:amd64.
Preparing to unpack .../63-
Unpacking libc-ares2:amd64 (1.18.1-1build1) ...
Selecting previously unselected package libcollection4:
Preparing to unpack .../64-
Unpacking libcollection4:
Selecting previously unselected package libdhash1:amd64.
Preparing to unpack .../65-
Unpacking libdhash1:amd64 (0.6.2-1) ...
Selecting previously unselected package libpath-
Preparing to unpack .../66-
Unpacking libpath-
Selecting previously unselected package libref-
Preparing to unpack .../67-
Unpacking libref-array1:amd64 (0.6.2-1) ...
Selecting previously unselected package libini-
Preparing to unpack .../68-
Unpacking libini-
Selecting previously unselected package libipa-hbac0.
Preparing to unpack .../69-
Unpacking libipa-hbac0 (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package libnss-sss:amd64.
Preparing to unpack .../70-
Unpacking libnss-sss:amd64 (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package libpam-sss:amd64.
Preparing to unpack .../71-
Unpacking libpam-sss:amd64 (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package libsss-certmap0.
Preparing to unpack .../72-
Unpacking libsss-certmap0 (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package libsss-idmap0.
Preparing to unpack .../73-
Unpacking libsss-idmap0 (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package libsss-nss-idmap0.
Preparing to unpack .../74-
Unpacking libsss-nss-idmap0 (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package python3-sss.
Preparing to unpack .../75-
Unpacking python3-sss (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-common.
Preparing to unpack .../76-
Unpacking sssd-common (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-ad-common.
Preparing to unpack .../77-
Unpacking sssd-ad-common (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-krb5-common.
Preparing to unpack .../78-
Unpacking sssd-krb5-common (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-ad.
Preparing to unpack .../79-
Unpacking sssd-ad (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-ipa.
Preparing to unpack .../80-
Unpacking sssd-ipa (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-krb5.
Preparing to unpack .../81-
Unpacking sssd-krb5 (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-ldap.
Preparing to unpack .../82-
Unpacking sssd-ldap (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd-proxy.
Preparing to unpack .../83-
Unpacking sssd-proxy (2.6.3-1ubuntu3.1) ...
Selecting previously unselected package sssd.
Preparing to unpack .../84-
Unpacking sssd (2.6.3-1ubuntu3.1) ...
Setting up libpipewire-
Setting up gsettings-
Setting up libtext-iconv-perl (1.7-7build3) ...
Setting up libmozjs-91-0:amd64 (91.10.0-0ubuntu1) ...
Setting up libtext-
Setting up tracker (3.3.0-1) ...
Setting up libpath-
Setting up google-
Setting up libnfsidmap1:amd64 (1:2.6.1-1ubuntu1) ...
Setting up libsss-idmap0 (2.6.3-1ubuntu3.1) ...
Setting up libbasicobjects
Setting up uno-libs-private (1:7.3.
Setting up gnome-settings-
Setting up libdebuginfod-
Creating config file /etc/profile.
Creating config file /etc/profile.
Setting up libgslcblas0:amd64 (2.7.1+dfsg-3) ...
Setting up libgdm1 (42.0-1ubuntu7) ...
Setting up sane-airscan (0.99.27-1build1) ...
Setting up yaru-theme-
update-
resource to provide /usr/share/
rce) in auto mode
Setting up libkf5khtml-data (5.92.0-0ubuntu1) ...
Setting up libboost-
Setting up remmina-common (1.4.25+dfsg-1) ...
Setting up power-profiles-
Created symlink /etc/systemd/
.service → /lib/systemd/
Setting up libdebuginfod1:
Setting up libtss2-mu0:amd64 (3.2.0-1ubuntu1) ...
Setting up libfwupd2:amd64 (1.7.5-3) ...
Setting up libtss2-
Setting up libpam-
Setting up perl-openssl-
Setting up linux-libc-
Setting up libgsl27:amd64 (2.7.1+dfsg-3) ...
Setting up gnome-shell-common (42.4-0ubuntu0.
Setting up libboost-
Setting up kded5 (5.92.0-0ubuntu1) ...
Setting up libreoffice-
Setting up libntfs-3g89 (1:2021.
Setting up libc-ares2:amd64 (1.18.1-1build1) ...
Setting up libgweather-
Setting up nautilus-data (1:42.2-0ubuntu1) ...
Setting up perl-modules-5.34 (5.34.0-3ubuntu1) ...
Setting up libayatana-
Setting up libnautilus-
Setting up libvncserver1:amd64 (0.9.13+
Setting up libtss2-
Setting up ntfs-3g (1:2021.
Setting up libsource-
Setting up libtalloc2:amd64 (2.3.3-2build1) ...
Setting up gnome-desktop3-data (42.4-0ubuntu1) ...
Setting up libftdi1-2:amd64 (1.5-5build3) ...
Setting up libgupnp-dlna-2.0-4 (0.12.0-3) ...
Setting up libflashrom1:amd64 (1.2-5build1) ...
Setting up liborcus-
Setting up libtss2-
Setting up libdhash1:amd64 (0.6.2-1) ...
Setting up libtevent0:amd64 (0.11.0-1build1) ...
Setting up gnome-control-
Setting up libspa-
Setting up gnome-bluetooth
Setting up libraqm0:amd64 (0.7.0-4ubuntu1) ...
Setting up libpipewire-
Setting up libboost-
Setting up usrmerge (25ubuntu2) ...
Setting up libipt2 (2.0.5-1) ...
Setting up libnma-common (1.8.34-1ubuntu1) ...
Setting up libtss2-
Setting up libgc1:amd64 (1:8.0.6-1.1build1) ...
Setting up libglew2.2:amd64 (2.2.0-4) ...
Setting up libkf5sonnet5-data (5.92.0-0ubuntu1) ...
Setting up linux-headers-
Setting up libcollection4:
Setting up libebackend-
Setting up libipa-hbac0 (2.6.3-1ubuntu3.1) ...
Setting up libfreerdp-
Setting up linux-headers-
Setting up libmpdec3:amd64 (2.5.1-2build2) ...
Setting up gnome-session-
Setting up systemd-oomd (249.11-0ubuntu3.4) ...
Created symlink /etc/systemd/
temd/system/
Created symlink /etc/systemd/
→ /lib/systemd/
Setting up libgirepository
Setting up libref-array1:amd64 (0.6.2-1) ...
Setting up libkf5textwidge
Setting up libgupnp-av-1.0-3 (0.14.0-3) ...
Setting up libsane-common (1.1.1-5) ...
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Installing new version of config file /etc/sane.
Setting up transmission-common (3.00-2ubuntu2) ...
Setting up libldb2:amd64 (2:2.4.
Setting up linux-headers-
Setting up libayatana-
Setting up libsss-nss-idmap0 (2.6.3-1ubuntu3.1) ...
Setting up libfwupdplugin5
Setting up gvfs-common (1.48.2-0ubuntu1) ...
Setting up thermald (2.4.9-1ubuntu0.1) ...
Setting up libpam-sss:amd64 (2.6.3-1ubuntu3.1) ...
Setting up liblocale-
Setting up guile-2.
Setting up libhfstospell11
Setting up libsource-
Setting up libjs-underscore (1.13.2~dfsg-2) ...
Setting up libboost-
Setting up librygel-
Setting up libwacom-common (2.2.0-1) ...
Setting up libkf5sonnetcor
Setting up libnss-sss:amd64 (2.6.3-1ubuntu3.1) ...
First installation detected...
Checking NSS setup...
Adding an entry for automount.
Setting up libvoikko1:amd64 (4.3.1-1build1) ...
Setting up libuno-
Setting up libedata-
Setting up libperl5.34:amd64 (5.34.0-3ubuntu1) ...
Setting up xdg-desktop-portal (1.14.4-
Created symlink /etc/systemd/
-portal-
rite-launchers.
Setting up libgjs0g:amd64 (1.72.0-
Setting up libtss2-sys1:amd64 (3.2.0-1ubuntu1) ...
Setting up libwacom9:amd64 (2.2.0-1) ...
Setting up gjs (1.72.0-
Setting up libini-
Setting up libgnome-
Setting up libedata-
Setting up libwbclient0:amd64 (2:4.15.
Setting up libsss-certmap0 (2.6.3-1ubuntu3.1) ...
Setting up liborcus-
Setting up libinput-bin (1.20.0-1ubuntu0.1) ...
Setting up libpipewire-
Setting up libpython3.
Setting up sonnet-
Setting up perl (5.34.0-3ubuntu1) ...
Setting up libpackage-
Setting up libsnmp40:amd64 (5.9.1+
Setting up libtss2-
Setting up libdate-simple-perl (3.0300-3build2) ...
Setting up linux-headers-
Setting up libstring-
Setting up libperlio-
Setting up libayatana-
Setting up libunicode-
Setting up libkf5sonnetui5
Setting up libencode-
Setting up libvariable-
Setting up libb-hooks-
Setting up liblist-
Setting up gir1.2-
Setting up librygel-
Setting up libjs-sphinxdoc (4.3.2-1) ...
Setting up libparams-util-perl (1.102-1build3) ...
Setting up libxml-libxml-perl (2.0207+
update-
th priority 50...
update-
ity 50...
update-
Replacing config file /etc/perl/
Setting up libsub-name-perl (0.26-1build3) ...
Setting up libhtml-
Setting up libjson-perl (4.04000-1) ...
Setting up ure (1:7.3.
Setting up libcairo-perl:amd64 (1.109-2build1) ...
Setting up libclass-
Setting up libencode-
Setting up gir1.2-
Setting up libebook-
Setting up libboost-
Setting up libparams-
Setting up libhpmud0:amd64 (3.21.12+dfsg0-1) ...
Setting up libalgorithm-
Setting up fwupd (1.7.5-3) ...
fwupd-offline-
rting it.
fwupd-refresh.
t.
fwupd.service is a disabled or a static unit not running, not starting it.
Setting up libsane-hpaio:amd64 (3.21.12+dfsg0-1) ...
Installing new version of config file /etc/hp/hplip.conf ...
Setting up libdatetime-
Setting up libpython3-
Setting up libtext-csv-perl (2.01-1) ...
Setting up libnet-
Setting up libinput10:amd64 (1.20.0-1ubuntu0.1) ...
Setting up libxml-
Setting up gir1.2-
Setting up libpython3.10:amd64 (3.10.4-3ubuntu0.1) ...
Setting up libencode-
Setting up gir1.2-
Setting up python3.10 (3.10.4-3ubuntu0.1) ...
Setting up evolution-
Installing new version of config file /etc/xdg/
rm-notify.desktop ...
Setting up libref-util-xs-perl (0.117-1build5) ...
Setting up libtext-bibtex-perl (0.88-3build3) ...
Setting up libimage-
Setting up libfile-
Setting up libsort-key-perl (1.33-2build5) ...
Setting up libclone-perl (0.45-1build3) ...
Setting up libencode-
Setting up libsub-
Setting up liblist-
Setting up libscalar-
Setting up xserver-
Setting up libcommon-
Setting up libnet-dbus-perl (1.2.0-1build3) ...
Setting up libpadwalker-perl (2.5-1build2) ...
Setting up gir1.2-
Setting up libtext-
Setting up libipc-
Setting up python3 (3.10.4-0ubuntu2) ...
running python rtupdate hooks for python3.10...
running python post-rtupdate hooks for python3.10...
Setting up libxstring-perl (0.005-1build2) ...
Setting up rygel (0.40.3-1ubuntu2) ...
Installing new version of config file /etc/rygel.conf ...
Setting up libkf5textwidge
Setting up libdevel-
Setting up python3-markupsafe (2.0.1-2build1) ...
Setting up python3-sss (2.6.3-1ubuntu3.1) ...
Setting up libclass-c3-xs-perl (0.15-1build2) ...
Setting up libsane1:amd64 (1.1.1-5) ...
Setting up pipewire-bin (0.3.48-1ubuntu1) ...
Setting up libdevel-
Setting up libextutils-
Setting up asymptote (2.78+ds-2) ...
Setting up libautovivifica
Setting up python3-pil:amd64 (9.0.1-1build1) ...
Setting up python3-cups:amd64 (2.0.1-5build1) ...
Setting up libdevel-
Setting up liblist-
Setting up transmission-gtk (3.00-2ubuntu2) ...
Setting up liblist-
Setting up gdb (12.0.90-0ubuntu1) ...
Setting up remmina (1.4.25+dfsg-1) ...
Setting up libreoffice-common (1:7.3.
Installing new version of config file /etc/apparmor.
m.oosplash ...
Installing new version of config file /etc/apparmor.
m.soffice.bin ...
Installing new version of config file /etc/libreoffic
Creating config file /etc/libreoffic
Creating config file /etc/libreoffic
Creating config file /etc/libreoffic
Creating config file /etc/libreoffic
on
Creating config file /etc/libreoffic
on
Creating config file /etc/libreoffic
new version
rmdir: removing directory, '/usr/lib/
'/usr/lib/
Setting up python3-gi (3.42.1-0ubuntu1) ...
Setting up python3-
Setting up python3-
Setting up python3-ldb (2:2.4.
Setting up libpython3.
Setting up texinfo (6.8-4build1) ...
Running mktexlsr. This may take some time. ... done.
Setting up python3-numpy (1:1.21.5-1build2) ...
Setting up libxml-libxslt-perl (1.99-1build2) ...
Setting up remmina-
Setting up kio (5.92.0-0ubuntu1) ...
Setting up python3-reportlab (3.6.8-1) ...
Setting up python3-
Setting up libwacom-bin (2.2.0-1) ...
Setting up ure-java (1:7.3.
Setting up python3.10-dev (3.10.4-3ubuntu0.1) ...
Setting up libtypes-
Setting up simple-scan (42.0-1) ...
Setting up python3-lxml:amd64 (4.8.0-1build1) ...
Setting up libpeas-1.0-0:amd64 (1.32.0-1) ...
Setting up duplicity (0.8.21-1build1) ...
Setting up remmina-
Setting up printer-
Setting up sane-utils (1.1.1-5) ...
update-inetd: warning: cannot add service, /etc/inetd.conf does not exist
usermod: no changes
saned.socket is a disabled or a static unit not running, not starting it.
Setting up python3-protobuf (3.12.4-1ubuntu7) ...
Setting up pipewire:amd64 (0.3.48-1ubuntu1) ...
Created symlink /etc/systemd/
ib/systemd/
Created symlink /etc/systemd/
b/systemd/
Setting up python3-lib2to3 (3.10.4-0ubuntu1) ...
Setting up libreoffice-core (1:7.3.
Setting up python3-systemd (234-3ubuntu2) ...
Setting up python3-
Setting up python3-distutils (3.10.4-0ubuntu1) ...
Setting up libkf5khtml5:amd64 (5.92.0-0ubuntu1) ...
Setting up gir1.2-
Setting up libjson-xs-perl (4.030-1build3) ...
Setting up libreoffice-math (1:7.3.
Creating config file /etc/libreoffic
Setting up libreoffice-gtk3 (1:7.3.
Setting up gedit-common (41.0-3) ...
Setting up python3-dbus (1.2.18-3build1) ...
Setting up libglib-perl:amd64 (3:1.329.3-2build1) ...
Setting up libpython3-
Setting up python3-cairo:amd64 (1.20.1-3build1) ...
Setting up python3-
Setting up liblibreoffice-java (1:7.3.
Setting up libjurt-java (1:7.3.
Setting up ubuntu-minimal (1.481) ...
Setting up libreoffice-draw (1:7.3.
Creating config file /etc/libreoffic
Creating config file /etc/libreoffic
n
Setting up python3-gdbm:amd64 (3.10.4-0ubuntu1) ...
Setting up python3-
Setting up python3-apt (2.3.0ubuntu2.1) ...
Setting up colord (1.4.6-1) ...
Setting up update-
Installing new version of config file /etc/update-
Removing obsolete conffile /etc/cron.
Removing obsolete conffile /etc/cron.
Created symlink /etc/systemd/
.timer → /lib/systemd/
Created symlink /etc/systemd/
er → /lib/systemd/
update-
starting it.
update-
rting it.
Setting up libreoffice-
Setting up remmina-
Setting up libunoil-java (1:7.3.
Setting up libparams-
Setting up hplip-data (3.21.12+dfsg0-1) ...
Setting up samba-libs:amd64 (2:4.15.
Setting up gstreamer1.
Setting up python3-yaml (5.4.1-1ubuntu1) ...
Setting up sssd-common (2.6.3-1ubuntu3.1) ...
Creating SSSD system user & group...
adduser: Warning: The home directory `/var/lib/sss' does not belong to the user
you are currently creating.
Warning: found usr.sbin.sssd in /etc/apparmor.
mode
Warning from /etc/apparmor.
0): Caching disabled for: 'usr.sbin.sssd' due to force complain
Created symlink /etc/systemd/
/systemd/
Created symlink /etc/systemd/
stemd/system/
Created symlink /etc/systemd/
ib/systemd/
Created symlink /etc/systemd/
stemd/system/
Created symlink /etc/systemd/
stemd/system/
Created symlink /etc/systemd/
ystemd/
Created symlink /etc/systemd/
systemd/
sssd-autofs.service is a disabled or a static unit, not starting it.
sssd-nss.service is a disabled or a static unit, not starting it.
sssd-pam.service is a disabled or a static unit, not starting it.
sssd-ssh.service is a disabled or a static unit, not starting it.
sssd-sudo.service is a disabled or a static unit, not starting it.
Could not execute systemctl: at /usr/bin/
Setting up sssd-proxy (2.6.3-1ubuntu3.1) ...
Setting up libsane:amd64 (1.1.1-5) ...
Setting up libreoffice-
Setting up sssd-ad-common (2.6.3-1ubuntu3.1) ...
Created symlink /etc/systemd/
stemd/system/
sssd-pac.service is a disabled or a static unit, not starting it.
Could not execute systemctl: at /usr/bin/
Setting up sssd-krb5-common (2.6.3-1ubuntu3.1) ...
Setting up python3-dev (3.10.4-0ubuntu2) ...
Setting up libjuh-java (1:7.3.
Setting up pipewire-
Created symlink /etc/systemd/
stemd/user/
Created symlink /etc/systemd/
service → /usr/lib/
Setting up libreoffice-gnome (1:7.3.
Creating config file /etc/libreoffic
Setting up libsmbclient:amd64 (2:4.15.
Setting up librhythmbox-
Setting up libreoffice-impress (1:7.3.
Creating config file /etc/libreoffic
Creating config file /etc/libreoffic
Setting up sssd-krb5 (2.6.3-1ubuntu3.1) ...
Setting up libreoffice-
Setting up libreoffice-
Setting up python3-uno (1:7.3.
Creating config file /etc/libreoffic
Setting up libcairo-
Setting up rhythmbox (3.4.4-5ubuntu1) ...
Setting up python3-gi-cairo (3.42.1-0ubuntu1) ...
Setting up sssd-ldap (2.6.3-1ubuntu3.1) ...
Setting up libridl-java (1:7.3.
Setting up libreoffice-calc (1:7.3.
Creating config file /etc/libreoffic
Setting up hplip (3.21.12+dfsg0-1) ...
Creating/updating hplip user account...
Setting up libglib-
Setting up gir1.2-rb-3.0:amd64 (3.4.4-5ubuntu1) ...
Setting up sssd-ad (2.6.3-1ubuntu3.1) ...
Setting up usb-creator-common (0.3.13) ...
Setting up libreoffice-writer (1:7.3.
Creating config file /etc/libreoffic
Setting up usb-creator-gtk (0.3.13) ...
Setting up rhythmbox-plugins (3.4.4-5ubuntu1) ...
Setting up sssd-ipa (2.6.3-1ubuntu3.1) ...
Setting up sssd (2.6.3-1ubuntu3.1) ...
Setting up linux-image-
I: /boot/vmlinuz.old is now a symlink to vmlinuz-
I: /boot/initrd.
I: /boot/vmlinuz is now a symlink to vmlinuz-
I: /boot/initrd.img is now a symlink to initrd.
Setting up linux-modules-
Setting up linux-modules-
Setting up linux-image-
Setting up linux-generic-
Setting up linux-generic-
Setting up linux-image-
Processing triggers for mailcap (3.70+nmu1ubuntu1) ...
Processing triggers for desktop-file-utils (0.26-1ubuntu3) ...
Processing triggers for initramfs-tools (0.140ubuntu13) ...
update-initramfs: Generating /boot/initrd.
I: The initramfs will attempt to resume from /dev/nvme0n1p5
I: (UUID=c8065c1e-
I: Set the RESUME variable to override this.
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for cups (2.4.1op1-
Updating PPD files for hpcups ...
Processing triggers for gnome-menus (3.36.0-1ubuntu3) ...
Processing triggers for libglib2.0-0:i386 (2.72.1-1) ...
Processing triggers for libglib2.0-0:amd64 (2.72.1-1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.1) ...
Setting up libnma0:amd64 (1.8.34-1ubuntu1) ...
Processing triggers for gconf2 (3.2.6-7ubuntu2) ...
Setting up libadwaita-
Processing triggers for man-db (2.10.2-1) ...
Setting up ubuntu-settings (22.04.6) ...
Processing triggers for tex-common (6.17) ...
Running mktexlsr. This may take some time... done.
Running mtxrun --generate. This may take some time... done.
Processing triggers for dbus (1.12.20-2ubuntu4) ...
Processing triggers for shared-mime-info (2.1-2) ...
Processing triggers for udev (249.11-0ubuntu3.4) ...
Setting up gvfs-libs:amd64 (1.48.2-0ubuntu1) ...
Setting up libgnome-
Setting up gir1.2-
Processing triggers for install-info (6.8-4build1) ...
Setting up libgnome-
Setting up eog (42.0-1) ...
Setting up xdg-desktop-
Setting up gir1.2-
Setting up gedit (41.0-3) ...
Setting up tracker-extract (3.3.0-1) ...
Created symlink /etc/systemd/
→ /usr/lib/
Removing obsolete conffile /etc/xdg/
Setting up gnome-calendar (41.2-3) ...
Setting up gnome-settings-
Installing new version of config file /etc/xdg/
Installing new version of config file /etc/xdg/
n.A11ySettings.
Installing new version of config file /etc/xdg/
n.Color.desktop ...
Installing new version of config file /etc/xdg/
n.Datetime.desktop ...
Installing new version of config file /etc/xdg/
n.Housekeeping.
Installing new version of config file /etc/xdg/
n.Keyboard.desktop ...
Installing new version of config file /etc/xdg/
n.MediaKeys.desktop ...
Installing new version of config file /etc/xdg/
n.Power.desktop ...
Installing new version of config file /etc/xdg/
n.PrintNotifica
Installing new version of config file /etc/xdg/
n.Rfkill.desktop ...
Installing new version of config file /etc/xdg/
n.ScreensaverPr
Installing new version of config file /etc/xdg/
n.Sharing.desktop ...
Installing new version of config file /etc/xdg/
n.Smartcard.desktop ...
Installing new version of config file /etc/xdg/
n.Sound.desktop ...
Installing new version of config file /etc/xdg/
n.UsbProtection
Installing new version of config file /etc/xdg/
n.Wacom.desktop ...
Installing new version of config file /etc/xdg/
n.Wwan.desktop ...
Installing new version of config file /etc/xdg/
n.XSettings.desktop ...
Setting up gnome-session-bin (42.0-1ubuntu2) ...
Setting up gir1.2-adw-1:amd64 (1.1.0-1ubuntu2) ...
Setting up tracker-miner-fs (3.3.0-1) ...
Created symlink /etc/systemd/
service → /usr/lib/
Removing obsolete conffile /etc/xdg/
Setting up gvfs-daemons (1.48.2-0ubuntu1) ...
Setting up gir1.2-
Setting up libgnome-
Setting up libmutter-
Setting up gnome-startup-
Setting up gvfs:amd64 (1.48.2-0ubuntu1) ...
Setting up xdg-desktop-
Setting up gir1.2-
Setting up mutter (42.2-0ubuntu1) ...
Setting up gvfs-backends (1.48.2-0ubuntu1) ...
Setting up gnome-remote-
Setting up gnome-shell (42.4-0ubuntu0.
Setting up ubuntu-session (42.0-1ubuntu2) ...
Setting up gdm3 (42.0-1ubuntu7) ...
Installing new version of config file /etc/gdm3/
Installing new version of config file /etc/gdm3/Xsession ...
Installing new version of config file /etc/init.d/gdm3 ...
Replacing config file /etc/gdm3/
update-
tc/pam.
Setting up update-notifier (3.192.54) ...
Setting up gvfs-fuse (1.48.2-0ubuntu1) ...
Setting up nautilus (1:42.2-0ubuntu1) ...
Setting up gnome-control-
Setting up network-
Setting up gnome-shell-
Setting up gnome-shell-
Setting up ubuntu-
Setting up ubuntu-desktop (1.481) ...
Processing triggers for rygel (0.40.3-1ubuntu2) ...
Processing triggers for linux-image-
/etc/kernel/
update-initramfs: Generating /boot/initrd.
I: The initramfs will attempt to resume from /dev/nvme0n1p5
I: (UUID=c8065c1e-
I: Set the RESUME variable to override this.
/etc/kernel/
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-
Found initrd image: /boot/initrd.
Found linux image: /boot/vmlinuz-
Found initrd image: /boot/initrd.
Found linux image: /boot/vmlinuz-
Found initrd image: /boot/initrd.
Memtest86+ needs a 16-bit boot, that is not available on EFI, exiting
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot
entries.
Found Windows Boot Manager on /dev/nvme0n1p1@
Adding boot menu entry for UEFI Firmware Settings ...
done
Processing triggers for libc-bin (2.35-0ubuntu3.1) ...
sudo apt install gjs libc6 libffi8 libgcc-s1 libgirepository
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
libffi8 is already the newest version (3.4.2-4).
libffi8 set to manually installed.
libgcc-s1 is already the newest version (12-20220319-
libgcc-s1 set to manually installed.
libgirepository
libgirepository
libglib2.0-0 is already the newest version (2.72.1-1).
libglib2.0-0 set to manually installed.
libstdc++6 is already the newest version (12-20220319-
libstdc++6 set to manually installed.
gjs is already the newest version (1.72.0-
gjs set to manually installed.
libc6 is already the newest version (2.35-0ubuntu3.1).
libc6 set to manually installed.
libgjs0g is already the newest version (1.72.0-
libgjs0g set to manually installed.
The following packages were automatically installed and are no longer required:
app-install-
gir1.2-cogl-1.0 gir1.2-
gir1.
libamtk-5-0 libamtk-5-common libasn1-8-heimdal libblas3
libboost-
libboost-
libcdio18 libcmis-0.5-5v5 libedataserver-
libextutils-
libgupnp-1.2-0 libhandy-0.0-0 libhcrypto4-heimdal libheimbase1-
libheimntlm0-
libimage-
liblapack3 libldap-2.4-2 libmozjs-68-0 libmpdec2 libmysqlclient21
libneon27-gnutls libntfs-3g883 liborcus-0.15-0 libperl5.30 libpoppler97
libpotrace0 libprotobuf17 libpython3.8 libpython3.8-dev libpython3.
libpython3.
libsane libsnmp35 libtepl-4-0 libtracker-
libtracker-
libwind0-heimdal libxmlb1 linux-headers-
linux-
linux-
linux-
mysql-common perl-modules-5.30 pkg-config python3-appdirs python3-bs4
python3-cssselect python3-html5lib python3-lxml python3-numpy
python3-packaging python3-scour python3-soupsieve python3-
python3.8 python3.8-dev python3.8-minimal syslinux syslinux-common
syslinux-legacy vino xul-ext-ubufox
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
Revision history for this message
![]() |
#8 |
I guess the key of the solution was executing the command "apt full-upgrade" instead of "apt upgrade".
"apt upgrade" will never remove packages, but during the upgrade this was necessary (e.g. the package fuse is uninstalled and the new one fuse3 is installed, the same for libmutter-6-0 vs. libmutter-10-0).
Does the system now work as desired?
You should also consider doing a clean-up action for obsolete packages with the command
sudo apt --purge autoremove
Revision history for this message
![]() |
#9 |
Thanks for the help now the issue has been resolved. My system's windowing system has changed to Wayland. Is it better, or should I go back to the previous x11?
Revision history for this message
![]() |
#10 |
Whether a person prefers wayland or xorg is a personal decision. I do not dare to make a recommendation.
You can search the web and will get answers preferring Xorg and answers voting for wayland.
see e.g. https:/
Can you help with this problem?
Provide an answer of your own, or ask Partha Das for more information if necessary.