https://launchpad.net/ubuntu/+source/libperlio-gzip-perl/0.19-1build5/+build/19106460 RUN: /usr/share/launchpad-buildd/bin/builder-prep Kernel version: Linux riscv64-qemu-lcy01-098 5.4.0-21-generic #25-Ubuntu SMP Tue Mar 31 01:57:06 UTC 2020 riscv64 Buildd toolchain package versions: launchpad-buildd_188 python-lpbuildd_188 sbuild_0.79.0-1ubuntu1 git_1:2.25.1-1ubuntu1 dpkg-dev_1.19.7ubuntu2 python-debian_0.1.36build1. Syncing the system clock with the buildd NTP service... 2 Apr 15:41:55 ntpdate[19457]: adjust time server 10.211.37.1 offset 0.000047 sec RUN: /usr/share/launchpad-buildd/bin/in-target unpack-chroot --backend=chroot --series=focal --arch=riscv64 PACKAGEBUILD-19106460 --image-type chroot /home/buildd/filecache-default/88ad86cb2b525f1abddded96eadf8014548f7845 Creating target for build PACKAGEBUILD-19106460 RUN: /usr/share/launchpad-buildd/bin/in-target mount-chroot --backend=chroot --series=focal --arch=riscv64 PACKAGEBUILD-19106460 Starting target for build PACKAGEBUILD-19106460 RUN: /usr/share/launchpad-buildd/bin/in-target override-sources-list --backend=chroot --series=focal --arch=riscv64 PACKAGEBUILD-19106460 'deb http://ftpmaster.internal/ubuntu focal main universe' Overriding sources.list in build-PACKAGEBUILD-19106460 RUN: /usr/share/launchpad-buildd/bin/in-target update-debian-chroot --backend=chroot --series=focal --arch=riscv64 PACKAGEBUILD-19106460 Updating target for build PACKAGEBUILD-19106460 Ign:1 http://archive-team.internal/bootstrap/riscv64 focal InRelease Get:2 http://ftpmaster.internal/ubuntu focal InRelease [264 kB] Get:3 http://archive-team.internal/bootstrap/riscv64 focal Release [760 B] Ign:4 http://archive-team.internal/bootstrap/riscv64 focal Release.gpg Get:5 http://ftpmaster.internal/ubuntu focal-proposed InRelease [264 kB] Get:6 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 Packages [1982 kB] Get:7 http://ftpmaster.internal/ubuntu focal/main riscv64 Packages [407 kB] Get:8 http://ftpmaster.internal/ubuntu focal/main Translation-en [501 kB] Get:9 http://ftpmaster.internal/ubuntu focal/universe riscv64 Packages [4218 kB] Get:10 http://ftpmaster.internal/ubuntu focal/universe Translation-en [5127 kB] Get:11 http://ftpmaster.internal/ubuntu focal-proposed/main riscv64 Packages [13.1 kB] Get:12 http://ftpmaster.internal/ubuntu focal-proposed/main Translation-en [14.9 kB] Get:13 http://ftpmaster.internal/ubuntu focal-proposed/universe riscv64 Packages [64.7 kB] Get:14 http://ftpmaster.internal/ubuntu focal-proposed/universe Translation-en [92.3 kB] Fetched 13.0 MB in 22s (580 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. RUN: /usr/share/launchpad-buildd/bin/sbuild-package PACKAGEBUILD-19106460 riscv64 focal -c chroot:build-PACKAGEBUILD-19106460 --arch=riscv64 --dist=focal --nolog libperlio-gzip-perl_0.19-1build5.dsc Initiating build PACKAGEBUILD-19106460 with 4 jobs across 4 processor cores. Kernel reported to sbuild: 5.4.0-21-generic #25-Ubuntu SMP Tue Mar 31 01:57:06 UTC 2020 riscv64 sbuild (Debian sbuild) 0.79.0 (05 February 2020) on riscv64-qemu-lcy01-098 +==============================================================================+ | libperlio-gzip-perl 0.19-1build5 (riscv64) Thu, 02 Apr 2020 15:43:33 +0000 | +==============================================================================+ Package: libperlio-gzip-perl Version: 0.19-1build5 Source Version: 0.19-1build5 Distribution: focal Machine Architecture: riscv64 Host Architecture: riscv64 Build Architecture: riscv64 Build Type: any I: NOTICE: Log filtering will replace 'home/buildd/build-PACKAGEBUILD-19106460/chroot-autobuild' with '<>' I: NOTICE: Log filtering will replace 'build/libperlio-gzip-perl-1253Fm/resolver-kvnb6V' with '<>' +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- libperlio-gzip-perl_0.19-1build5.dsc exists in .; copying to chroot I: NOTICE: Log filtering will replace 'build/libperlio-gzip-perl-1253Fm/libperlio-gzip-perl-0.19' with '<>' I: NOTICE: Log filtering will replace 'build/libperlio-gzip-perl-1253Fm' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: perl, debhelper (>= 9.20120312~), zlib1g-dev, build-essential, fakeroot Filtered Build-Depends: perl, debhelper (>= 9.20120312~), zlib1g-dev, build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [386 B] Get:5 copy:/<>/apt_archive ./ Packages [468 B] Fetched 1811 B in 0s (4380 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: libgpm2 Use 'apt autoremove' to remove it. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libbsd0 libcroco3 libdebhelper-perl libelf1 libfile-stripnondeterminism-perl libglib2.0-0 libicu66 libmagic-mgc libmagic1 libpipeline1 libsigsegv2 libsub-override-perl libtool libuchardet0 libxml2 m4 man-db po-debconf tzdata zlib1g-dev Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libbsd0 libcroco3 libdebhelper-perl libelf1 libfile-stripnondeterminism-perl libglib2.0-0 libicu66 libmagic-mgc libmagic1 libpipeline1 libsigsegv2 libsub-override-perl libtool libuchardet0 libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy tzdata zlib1g-dev 0 upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 17.2 MB of archives. After this operation, 68.9 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [896 B] Get:2 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libbsd0 riscv64 0.10.0-1 [42.0 kB] Get:3 http://ftpmaster.internal/ubuntu focal/main riscv64 libmagic-mgc riscv64 1:5.38-4 [218 kB] Get:4 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 bsdmainutils riscv64 11.1.2ubuntu3 [176 kB] Get:5 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libuchardet0 riscv64 0.0.6-3build1 [64.9 kB] Get:6 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 groff-base riscv64 1.22.4-4build1 [815 kB] Get:7 http://ftpmaster.internal/ubuntu focal/main riscv64 libmagic1 riscv64 1:5.38-4 [70.5 kB] Get:8 http://ftpmaster.internal/ubuntu focal/main riscv64 file riscv64 1:5.38-4 [22.5 kB] Get:9 http://ftpmaster.internal/ubuntu focal/main riscv64 tzdata all 2019c-3ubuntu1 [294 kB] Get:10 http://ftpmaster.internal/ubuntu focal/main riscv64 autoconf all 2.69-11.1 [321 kB] Get:11 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libpipeline1 riscv64 1.5.2-2build1 [23.9 kB] Get:12 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 man-db riscv64 2.9.1-1 [1076 kB] Get:13 http://ftpmaster.internal/ubuntu focal/main riscv64 autotools-dev all 20180224.1 [39.6 kB] Get:14 http://ftpmaster.internal/ubuntu focal/main riscv64 automake all 1:1.16.1-4ubuntu6 [522 kB] Get:15 http://ftpmaster.internal/ubuntu focal/main riscv64 autopoint all 0.19.8.1-10build1 [412 kB] Get:16 http://ftpmaster.internal/ubuntu focal/main riscv64 libtool all 2.4.6-13 [161 kB] Get:17 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libelf1 riscv64 0.176-1.1build1 [41.8 kB] Get:18 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libglib2.0-0 riscv64 2.64.1-1 [1125 kB] Get:19 http://ftpmaster.internal/ubuntu focal/main riscv64 dh-autoreconf all 19 [16.1 kB] Get:20 http://ftpmaster.internal/ubuntu focal-proposed/main riscv64 libdebhelper-perl all 12.10ubuntu1 [62.1 kB] Get:21 http://ftpmaster.internal/ubuntu focal/main riscv64 libarchive-zip-perl all 1.67-2 [90.5 kB] Get:22 http://ftpmaster.internal/ubuntu focal/main riscv64 libsub-override-perl all 0.09-2 [9532 B] Get:23 http://ftpmaster.internal/ubuntu focal/main riscv64 libfile-stripnondeterminism-perl all 1.6.3-2 [16.0 kB] Get:24 http://ftpmaster.internal/ubuntu focal/main riscv64 dh-strip-nondeterminism all 1.6.3-2 [5228 B] Get:25 http://ftpmaster.internal/ubuntu focal/main riscv64 intltool-debian all 0.35.0+20060710.5 [24.9 kB] Get:26 http://ftpmaster.internal/ubuntu focal/main riscv64 po-debconf all 1.0.21 [233 kB] Get:27 http://ftpmaster.internal/ubuntu focal-proposed/main riscv64 debhelper all 12.10ubuntu1 [877 kB] Get:28 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libicu66 riscv64 66.1-2ubuntu2 [8406 kB] Get:29 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libxml2 riscv64 2.9.10+dfsg-4build1 [558 kB] Get:30 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 gettext-base riscv64 0.19.8.1-10build1 [47.4 kB] Get:31 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libsigsegv2 riscv64 2.12-2 [13.0 kB] Get:32 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 m4 riscv64 1.4.18-4 [188 kB] Get:33 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 dwz riscv64 0.13-5 [147 kB] Get:34 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 libcroco3 riscv64 0.6.13-1 [71.0 kB] Get:35 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 gettext riscv64 0.19.8.1-10build1 [843 kB] Get:36 http://archive-team.internal/bootstrap/riscv64 focal/main riscv64 zlib1g-dev riscv64 1:1.2.11.dfsg-2ubuntu1 [207 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 17.2 MB in 3s (5400 kB/s) Selecting previously unselected package libbsd0:riscv64. (Reading database ... 9818 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.10.0-1_riscv64.deb ... Unpacking libbsd0:riscv64 (0.10.0-1) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2ubuntu3_riscv64.deb ... Unpacking bsdmainutils (11.1.2ubuntu3) ... Selecting previously unselected package libuchardet0:riscv64. Preparing to unpack .../02-libuchardet0_0.0.6-3build1_riscv64.deb ... Unpacking libuchardet0:riscv64 (0.0.6-3build1) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-4build1_riscv64.deb ... Unpacking groff-base (1.22.4-4build1) ... Selecting previously unselected package libpipeline1:riscv64. Preparing to unpack .../04-libpipeline1_1.5.2-2build1_riscv64.deb ... Unpacking libpipeline1:riscv64 (1.5.2-2build1) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.9.1-1_riscv64.deb ... Unpacking man-db (2.9.1-1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.38-4_riscv64.deb ... Unpacking libmagic-mgc (1:5.38-4) ... Selecting previously unselected package libmagic1:riscv64. Preparing to unpack .../07-libmagic1_1%3a5.38-4_riscv64.deb ... Unpacking libmagic1:riscv64 (1:5.38-4) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.38-4_riscv64.deb ... Unpacking file (1:5.38-4) ... Selecting previously unselected package libelf1:riscv64. Preparing to unpack .../09-libelf1_0.176-1.1build1_riscv64.deb ... Unpacking libelf1:riscv64 (0.176-1.1build1) ... Selecting previously unselected package libglib2.0-0:riscv64. Preparing to unpack .../10-libglib2.0-0_2.64.1-1_riscv64.deb ... Unpacking libglib2.0-0:riscv64 (2.64.1-1) ... Selecting previously unselected package tzdata. Preparing to unpack .../11-tzdata_2019c-3ubuntu1_all.deb ... Unpacking tzdata (2019c-3ubuntu1) ... Selecting previously unselected package libicu66:riscv64. Preparing to unpack .../12-libicu66_66.1-2ubuntu2_riscv64.deb ... Unpacking libicu66:riscv64 (66.1-2ubuntu2) ... Selecting previously unselected package libxml2:riscv64. Preparing to unpack .../13-libxml2_2.9.10+dfsg-4build1_riscv64.deb ... Unpacking libxml2:riscv64 (2.9.10+dfsg-4build1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../14-gettext-base_0.19.8.1-10build1_riscv64.deb ... Unpacking gettext-base (0.19.8.1-10build1) ... Selecting previously unselected package libsigsegv2:riscv64. Preparing to unpack .../15-libsigsegv2_2.12-2_riscv64.deb ... Unpacking libsigsegv2:riscv64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../16-m4_1.4.18-4_riscv64.deb ... Unpacking m4 (1.4.18-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../17-autoconf_2.69-11.1_all.deb ... Unpacking autoconf (2.69-11.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../18-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../19-automake_1%3a1.16.1-4ubuntu6_all.deb ... Unpacking automake (1:1.16.1-4ubuntu6) ... Selecting previously unselected package autopoint. Preparing to unpack .../20-autopoint_0.19.8.1-10build1_all.deb ... Unpacking autopoint (0.19.8.1-10build1) ... Selecting previously unselected package libtool. Preparing to unpack .../21-libtool_2.4.6-13_all.deb ... Unpacking libtool (2.4.6-13) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../22-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../23-libdebhelper-perl_12.10ubuntu1_all.deb ... Unpacking libdebhelper-perl (12.10ubuntu1) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../24-libarchive-zip-perl_1.67-2_all.deb ... Unpacking libarchive-zip-perl (1.67-2) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../25-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../26-libfile-stripnondeterminism-perl_1.6.3-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.6.3-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../27-dh-strip-nondeterminism_1.6.3-2_all.deb ... Unpacking dh-strip-nondeterminism (1.6.3-2) ... Selecting previously unselected package dwz. Preparing to unpack .../28-dwz_0.13-5_riscv64.deb ... Unpacking dwz (0.13-5) ... Selecting previously unselected package libcroco3:riscv64. Preparing to unpack .../29-libcroco3_0.6.13-1_riscv64.deb ... Unpacking libcroco3:riscv64 (0.6.13-1) ... Selecting previously unselected package gettext. Preparing to unpack .../30-gettext_0.19.8.1-10build1_riscv64.deb ... Unpacking gettext (0.19.8.1-10build1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../31-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../32-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../33-debhelper_12.10ubuntu1_all.deb ... Unpacking debhelper (12.10ubuntu1) ... Selecting previously unselected package zlib1g-dev:riscv64. Preparing to unpack .../34-zlib1g-dev_1%3a1.2.11.dfsg-2ubuntu1_riscv64.deb ... Unpacking zlib1g-dev:riscv64 (1:1.2.11.dfsg-2ubuntu1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../35-sbuild-build-depends-main-dummy_0.invalid.0_riscv64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:riscv64 (1.5.2-2build1) ... Setting up libmagic-mgc (1:5.38-4) ... Setting up libarchive-zip-perl (1.67-2) ... Setting up libglib2.0-0:riscv64 (2.64.1-1) ... No schema files found: doing nothing. Setting up libdebhelper-perl (12.10ubuntu1) ... Setting up libmagic1:riscv64 (1:5.38-4) ... Setting up gettext-base (0.19.8.1-10build1) ... Setting up file (1:5.38-4) ... Setting up tzdata (2019c-3ubuntu1) ... Current default time zone: 'Etc/UTC' Local time is now: Thu Apr 2 15:45:20 UTC 2020. Universal Time is now: Thu Apr 2 15:45:20 UTC 2020. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20180224.1) ... Setting up libsigsegv2:riscv64 (2.12-2) ... Setting up autopoint (0.19.8.1-10build1) ... Setting up zlib1g-dev:riscv64 (1:1.2.11.dfsg-2ubuntu1) ... Setting up libuchardet0:riscv64 (0.0.6-3build1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libbsd0:riscv64 (0.10.0-1) ... Setting up libelf1:riscv64 (0.176-1.1build1) ... Setting up libfile-stripnondeterminism-perl (1.6.3-2) ... Setting up libtool (2.4.6-13) ... Setting up libicu66:riscv64 (66.1-2ubuntu2) ... Setting up m4 (1.4.18-4) ... Setting up bsdmainutils (11.1.2ubuntu3) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up autoconf (2.69-11.1) ... Setting up dh-strip-nondeterminism (1.6.3-2) ... Setting up dwz (0.13-5) ... Setting up groff-base (1.22.4-4build1) ... Setting up libxml2:riscv64 (2.9.10+dfsg-4build1) ... Setting up automake (1:1.16.1-4ubuntu6) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up man-db (2.9.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libcroco3:riscv64 (0.6.13-1) ... Setting up gettext (0.19.8.1-10build1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up dh-autoreconf (19) ... Setting up debhelper (12.10ubuntu1) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.31-0ubuntu6~riscv64.1) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (riscv64 included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 5.4.0-21-generic #25-Ubuntu SMP Tue Mar 31 01:57:06 UTC 2020 riscv64 (riscv64) Toolchain package versions: binutils_2.34-5ubuntu1 dpkg-dev_1.19.7ubuntu3 g++-9_9.3.0-8ubuntu1 gcc-9_9.3.0-8ubuntu1 libc6-dev_2.31-0ubuntu6~riscv64.1 libstdc++-9-dev_9.3.0-8ubuntu1 libstdc++6_10-20200324-1ubuntu1 linux-libc-dev_5.4.0-21.25 Package versions: adduser_3.118ubuntu1 advancecomp_2.1-2.1build1 apt_2.0.1 autoconf_2.69-11.1 automake_1:1.16.1-4ubuntu6 autopoint_0.19.8.1-10build1 autotools-dev_20180224.1 base-files_11ubuntu4 base-passwd_3.5.47 bash_5.0-6ubuntu1 binutils_2.34-5ubuntu1 binutils-common_2.34-5ubuntu1 binutils-riscv64-linux-gnu_2.34-5ubuntu1 bsdmainutils_11.1.2ubuntu3 bsdutils_1:2.34-0.1ubuntu8 build-essential_12.8ubuntu1 bzip2_1.0.8-2 ca-certificates_20190110ubuntu1 coreutils_8.30-3ubuntu2 cpp_4:9.3.0-1ubuntu2 cpp-9_9.3.0-8ubuntu1 dash_0.5.10.2-6 debconf_1.5.73 debhelper_12.10ubuntu1 debianutils_4.9.1 dh-autoreconf_19 dh-strip-nondeterminism_1.6.3-2 diffutils_1:3.7-3 dpkg_1.19.7ubuntu3 dpkg-dev_1.19.7ubuntu3 dwz_0.13-5 e2fsprogs_1.45.5-2ubuntu1 fakeroot_1.24-1 file_1:5.38-4 findutils_4.7.0-1ubuntu1 g++_4:9.3.0-1ubuntu2 g++-9_9.3.0-8ubuntu1 gcc_4:9.3.0-1ubuntu2 gcc-10-base_10-20200324-1ubuntu1 gcc-8-base_8.4.0-3ubuntu1 gcc-9_9.3.0-8ubuntu1 gcc-9-base_9.3.0-8ubuntu1 gettext_0.19.8.1-10build1 gettext-base_0.19.8.1-10build1 gpg_2.2.19-3ubuntu2 gpg-agent_2.2.19-3ubuntu2 gpgconf_2.2.19-3ubuntu2 gpgv_2.2.19-3ubuntu2 grep_3.4-1 groff-base_1.22.4-4build1 gzip_1.10-0ubuntu4 hostname_3.23 init-system-helpers_1.57 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-6 libapt-pkg6.0_2.0.1 libarchive-zip-perl_1.67-2 libassuan0_2.5.3-7ubuntu2 libatomic1_10-20200324-1ubuntu1 libattr1_1:2.4.48-5 libaudit-common_1:2.8.5-2ubuntu6 libaudit1_1:2.8.5-2ubuntu6 libbinutils_2.34-5ubuntu1 libblkid1_2.34-0.1ubuntu8 libbsd0_0.10.0-1 libbz2-1.0_1.0.8-2 libc-bin_2.31-0ubuntu6~riscv64.1 libc-dev-bin_2.31-0ubuntu6~riscv64.1 libc6_2.31-0ubuntu6~riscv64.1 libc6-dev_2.31-0ubuntu6~riscv64.1 libcap-ng0_0.7.9-2.1build1 libcc1-0_10-20200324-1ubuntu1 libcom-err2_1.45.5-2ubuntu1 libcroco3_0.6.13-1 libcrypt-dev_1:4.4.10-10ubuntu4 libcrypt1_1:4.4.10-10ubuntu4 libctf-nobfd0_2.34-5ubuntu1 libctf0_2.34-5ubuntu1 libdb5.3_5.3.28+dfsg1-0.6ubuntu2 libdebconfclient0_0.251ubuntu1 libdebhelper-perl_12.10ubuntu1 libdpkg-perl_1.19.7ubuntu3 libelf1_0.176-1.1build1 libext2fs2_1.45.5-2ubuntu1 libfakeroot_1.24-1 libffi7_3.3-4 libfile-stripnondeterminism-perl_1.6.3-2 libgcc-9-dev_9.3.0-8ubuntu1 libgcc-s1_10-20200324-1ubuntu1 libgcc1_1:10-20200324-1ubuntu1 libgcrypt20_1.8.5-5ubuntu1 libgdbm-compat4_1.18.1-5 libgdbm6_1.18.1-5 libglib2.0-0_2.64.1-1 libgmp10_2:6.2.0+dfsg-4 libgnutls30_3.6.11.1-2ubuntu2 libgomp1_10-20200324-1ubuntu1 libgpg-error0_1.37-1 libgpm2_1.20.7-5 libhogweed5_3.5.1+really3.5.1-2 libicu66_66.1-2ubuntu2 libidn2-0_2.2.0-2 libisl22_0.22.1-1 liblocale-gettext-perl_1.07-4 liblockfile-bin_1.16-1.1 liblockfile1_1.16-1.1 liblz4-1_1.9.2-2 liblzma5_5.2.4-1 libmagic-mgc_1:5.38-4 libmagic1_1:5.38-4 libmount1_2.34-0.1ubuntu8 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libncursesw6_6.2-0ubuntu2 libnettle7_3.5.1+really3.5.1-2 libnpth0_1.6-1 libp11-kit0_0.23.20-1build1 libpam-modules_1.3.1-5ubuntu4 libpam-modules-bin_1.3.1-5ubuntu4 libpam-runtime_1.3.1-5ubuntu4 libpam0g_1.3.1-5ubuntu4 libpcre2-8-0_10.34-7 libpcre3_2:8.39-12build1 libperl5.30_5.30.0-9build1 libpipeline1_1.5.2-2build1 libpng16-16_1.6.37-2 libreadline8_8.0-4 libselinux1_3.0-1build2 libsemanage-common_3.0-1build2 libsemanage1_3.0-1build2 libsepol1_3.0-1 libsigsegv2_2.12-2 libsmartcols1_2.34-0.1ubuntu8 libsqlite3-0_3.31.1-4 libss2_1.45.5-2ubuntu1 libssl1.1_1.1.1d-2ubuntu6 libstdc++-9-dev_9.3.0-8ubuntu1 libstdc++6_10-20200324-1ubuntu1 libsub-override-perl_0.09-2 libsystemd0_244.3-1ubuntu1 libtasn1-6_4.16.0-2 libtext-charwidth-perl_0.04-10 libtext-iconv-perl_1.7-7 libtinfo6_6.2-0ubuntu2 libtool_2.4.6-13 libuchardet0_0.0.6-3build1 libudev1_244.3-1ubuntu1 libunistring2_0.9.10-2 libuuid1_2.34-0.1ubuntu8 libxml2_2.9.10+dfsg-4build1 libzstd1_1.4.4+dfsg-3 linux-libc-dev_5.4.0-21.25 lockfile-progs_0.1.18 login_1:4.8.1-1ubuntu3 logsave_1.45.5-2ubuntu1 lsb-base_11.1.0ubuntu2 m4_1.4.18-4 make_4.2.1-1.2 man-db_2.9.1-1 mawk_1.3.4.20200120-2 mount_2.34-0.1ubuntu8 ncurses-base_6.2-0ubuntu2 ncurses-bin_6.2-0ubuntu2 openssl_1.1.1d-2ubuntu6 optipng_0.7.7-1 passwd_1:4.8.1-1ubuntu3 patch_2.7.6-6 perl_5.30.0-9build1 perl-base_5.30.0-9build1 perl-modules-5.30_5.30.0-9build1 pinentry-curses_1.1.0-3build1 pkgbinarymangler_144 po-debconf_1.0.21 policyrcd-script-zg2_0.1-3 readline-common_8.0-4 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12+nmu1 sysvinit-utils_2.96-2.1ubuntu1 tar_1.30+dfsg-7 tzdata_2019c-3ubuntu1 ubuntu-keyring_2020.02.11.1 util-linux_2.34-0.1ubuntu8 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-2ubuntu1 zlib1g-dev_1:1.2.11.dfsg-2ubuntu1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libperlio-gzip-perl Binary: libperlio-gzip-perl Architecture: any Version: 0.19-1build5 Maintainer: Debian Perl Group Uploaders: Jonathan Yu Homepage: https://metacpan.org/release/PerlIO-gzip Standards-Version: 3.9.6 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libperlio-gzip-perl.git Vcs-Git: git://anonscm.debian.org/pkg-perl/packages/libperlio-gzip-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: perl, debhelper (>= 9.20120312~), zlib1g-dev Package-List: libperlio-gzip-perl deb perl optional arch=any Checksums-Sha1: 696f2227ebd06406fe4e9ec7b262bee34da7eb26 18956 libperlio-gzip-perl_0.19.orig.tar.gz fbda8ae6a53205e1a10be29bc1563556f8a5723e 2380 libperlio-gzip-perl_0.19-1build5.debian.tar.xz Checksums-Sha256: d2e9351d58b8a93c86811e25a898ee651fc393a157413652bf42f9aada2eb284 18956 libperlio-gzip-perl_0.19.orig.tar.gz efe1f3ab0c2c6a81c2a22bbf91e14e05f7503f08cb0feec16680e915d283c7a5 2380 libperlio-gzip-perl_0.19-1build5.debian.tar.xz Files: dbcfc1450f6b593b65048b8ced061c98 18956 libperlio-gzip-perl_0.19.orig.tar.gz 4a33969cdd60c1f5da82e9ac8a8e2f0a 2380 libperlio-gzip-perl_0.19-1build5.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJEBAEBCAAuFiEE1WVxuIqLuvFAv2PWvX6qYHePpvUFAl2qFyoQHGRva29AdWJ1 bnR1LmNvbQAKCRC9fqpgd4+m9eoMD/9X1fhnFCHK2klccnsX0+ukDqQ9egOP6TCb mAx3izHBjaQnbhDmX5l14La2ukPGqXRP2RHsao7QcNqw+SG9sYojnnGQixKi33oP p3lHIOGrP9uh1l57MHqXJUskOcVdGCv+5IWXIMD4cWMthM5eLoYEjYjhrm2Wq4WB RN/Ar4xqm3yB2DqPBLvJt0rDdJ6UFvRgzhnZmJ9mq7fIXeVZdYOGDyJHeEyZoRhH kbEk8vPCxZnMO4tC+eQDlPKjE8aG0rugDHN2OIulzt09ItQRldeCD+rp/rV9Yh8f wrEMYL9ELuJmVI6oEgKZp9gfoj+etdp9Fy5AIfxRnATYzkN2R1RPk/mJjzyolyXo 02W6/+pqAuM4tupdlqiw52dkWkmJbkOZIsJttKhVremPZtR2Fsx7DdWj4PH3tfEX tcAojqi7OvOwNRV40mV1oCuaPorFvOeGLaJdErVg66bgjjww9gOGepz40pgPm6wG EQSYlgRgV0w6vxB+pbltbb27p3vAgttrF1glPa70vS2QECuVf3OGAgC15r4T7I7T MdvBQzDfB7ut429Cb+2IhabvJZvCwezuQx7OZ/1LHKIaB0ZCeRAdAhLlhZiey/Ni uRopnUA6xrI4/V/Xp+TCh8LAP5AXmRQQ3N+Q6asGwNbz5jpAnFxfkDBuycKKjG1H sdI6FjiRBA== =lNNO -----END PGP SIGNATURE----- gpgv: Signature made Fri Oct 18 19:48:58 2019 UTC gpgv: using RSA key D56571B88A8BBAF140BF63D6BD7EAA60778FA6F5 gpgv: issuer "doko@ubuntu.com" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libperlio-gzip-perl_0.19-1build5.dsc dpkg-source: info: extracting libperlio-gzip-perl in /<> dpkg-source: info: unpacking libperlio-gzip-perl_0.19.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.19-1build5.debian.tar.xz Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf DEB_BUILD_OPTIONS=parallel=4 HOME=/sbuild-nonexistent LANG=C.UTF-8 LC_ALL=C.UTF-8 LOGNAME=buildd PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games SCHROOT_ALIAS_NAME=build-PACKAGEBUILD-19106460 SCHROOT_CHROOT_NAME=build-PACKAGEBUILD-19106460 SCHROOT_COMMAND=env SCHROOT_GID=2501 SCHROOT_GROUP=buildd SCHROOT_SESSION_ID=build-PACKAGEBUILD-19106460 SCHROOT_UID=2001 SCHROOT_USER=buildd SHELL=/bin/sh TERM=unknown USER=buildd V=1 dpkg-buildpackage ----------------- Command: dpkg-buildpackage -us -uc -mLaunchpad Build Daemon -B -rfakeroot dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.19-1build5 dpkg-buildpackage: info: source distribution focal dpkg-source --before-build . dpkg-buildpackage: info: host architecture riscv64 fakeroot debian/rules clean dh clean dh_clean debian/rules build-arch dh build-arch dh_update_autotools_config -a dh_auto_configure -a perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=riscv64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build -a make -j1 make[1]: Entering directory '/<>' cp gzip.pm blib/lib/PerlIO/gzip.pm Running Mkbootstrap for gzip () chmod 644 "gzip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 "/usr/bin/perl" "/usr/share/perl/5.30/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.30/ExtUtils/typemap' gzip.xs > gzip.xsc mv gzip.xsc gzip.c riscv64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.19\" -DXS_VERSION=\"0.19\" -fPIC "-I/usr/lib/riscv64-linux-gnu/perl/5.30/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so riscv64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so Manifying 1 pod document make[1]: Leaving directory '/<>' dh_auto_test -a make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 94072 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 94072 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 94072 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 94072 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 6 wallclock secs ( 1.02 usr 0.20 sys + 4.35 cusr 1.18 csys = 6.75 CPU) Result: PASS make[1]: Leaving directory '/<>' fakeroot debian/rules binary-arch dh binary-arch dh_testroot -a dh_prep -a dh_auto_install -a make -j1 install DESTDIR=/<>/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /<>/debian/libperlio-gzip-perl/usr/lib/riscv64-linux-gnu/perl5/5.30/auto/PerlIO/gzip/gzip.so Installing /<>/debian/libperlio-gzip-perl/usr/lib/riscv64-linux-gnu/perl5/5.30/PerlIO/gzip.pm Installing /<>/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/<>' dh_installdocs -a dh_installchangelogs -a dh_installman -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a INFO: pkgstriptranslations version 144 INFO: pkgstriptranslations version 144 pkgstriptranslations: processing libperlio-gzip-perl (in debian/libperlio-gzip-perl); do_strip: 1, oemstrip: pkgstriptranslations: processing libperlio-gzip-perl-dbgsym (in debian/.debhelper/libperlio-gzip-perl/dbgsym-root); do_strip: 1, oemstrip: pkgstriptranslations: libperlio-gzip-perl does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgstriptranslations: libperlio-gzip-perl-dbgsym does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libperlio-gzip-perl/DEBIAN/control, package libperlio-gzip-perl, directory debian/libperlio-gzip-perl pkgstripfiles: processing control file: debian/.debhelper/libperlio-gzip-perl/dbgsym-root/DEBIAN/control, package libperlio-gzip-perl-dbgsym, directory debian/.debhelper/libperlio-gzip-perl/dbgsym-root dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in 'debian/.debhelper/scratch-space/build-libperlio-gzip-perl/libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.deb'. pkgstripfiles: Running PNG optimization (using 4 cpus) for package libperlio-gzip-perl ... pkgstripfiles: No PNG files. dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.19-1build5_riscv64.deb'. Renaming libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.deb to libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.ddeb dpkg-genbuildinfo --build=any dpkg-genchanges --build=any -mLaunchpad Build Daemon >../libperlio-gzip-perl_0.19-1build5_riscv64.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2020-04-02T15:47:57Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libperlio-gzip-perl_0.19-1build5_riscv64.changes: ------------------------------------------------- Format: 1.8 Date: Fri, 18 Oct 2019 19:34:06 +0000 Source: libperlio-gzip-perl Binary: libperlio-gzip-perl Architecture: riscv64 Version: 0.19-1build5 Distribution: focal Urgency: medium Maintainer: Launchpad Build Daemon Changed-By: Matthias Klose Description: libperlio-gzip-perl - module providing a PerlIO layer to gzip/gunzip Changes: libperlio-gzip-perl (0.19-1build5) focal; urgency=medium . * No-change rebuild for the perl update. Checksums-Sha1: 789308f6f28241a7faf63541e6f3c7db8ad40092 38896 libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.ddeb 24610f6553dff50c62933da5d43558fc1e140f32 5213 libperlio-gzip-perl_0.19-1build5_riscv64.buildinfo b30859d60d19bd72236b1a73f661fef55d2661f4 13564 libperlio-gzip-perl_0.19-1build5_riscv64.deb Checksums-Sha256: 88b73fd1711605855debd1baa1d908a87a6e68fedf1a5af653a7271f4ac5aa8d 38896 libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.ddeb 6dd79a38d71522c6ff462d5ba56b6db0c5c39f8c6d44dcbc4d7619c02cf568a7 5213 libperlio-gzip-perl_0.19-1build5_riscv64.buildinfo 80024f6a7a798726c5aef4258c9a04288bf22a2855d50147a021087a5d1a7a79 13564 libperlio-gzip-perl_0.19-1build5_riscv64.deb Files: 9e6897f11d82d84bbfdc04f4bddeef6c 38896 debug optional libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.ddeb ca894492ff2051e4ea056b1fc6db838d 5213 perl optional libperlio-gzip-perl_0.19-1build5_riscv64.buildinfo 4addf2911427816daf0f4ce26277bc21 13564 perl optional libperlio-gzip-perl_0.19-1build5_riscv64.deb /<>/libperlio-gzip-perl_0.19-1build5_riscv64.changes.new could not be renamed to /<>/libperlio-gzip-perl_0.19-1build5_riscv64.changes: Illegal seek Distribution field may be wrong!!! +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libperlio-gzip-perl Binary: libperlio-gzip-perl Architecture: riscv64 Version: 0.19-1build5 Checksums-Md5: 9e6897f11d82d84bbfdc04f4bddeef6c 38896 libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.ddeb 4addf2911427816daf0f4ce26277bc21 13564 libperlio-gzip-perl_0.19-1build5_riscv64.deb Checksums-Sha1: 789308f6f28241a7faf63541e6f3c7db8ad40092 38896 libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.ddeb b30859d60d19bd72236b1a73f661fef55d2661f4 13564 libperlio-gzip-perl_0.19-1build5_riscv64.deb Checksums-Sha256: 88b73fd1711605855debd1baa1d908a87a6e68fedf1a5af653a7271f4ac5aa8d 38896 libperlio-gzip-perl-dbgsym_0.19-1build5_riscv64.ddeb 80024f6a7a798726c5aef4258c9a04288bf22a2855d50147a021087a5d1a7a79 13564 libperlio-gzip-perl_0.19-1build5_riscv64.deb Build-Origin: Ubuntu Build-Architecture: riscv64 Build-Date: Thu, 02 Apr 2020 15:47:51 +0000 Build-Path: /<> Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: autoconf (= 2.69-11.1), automake (= 1:1.16.1-4ubuntu6), autopoint (= 0.19.8.1-10build1), autotools-dev (= 20180224.1), base-files (= 11ubuntu4), base-passwd (= 3.5.47), bash (= 5.0-6ubuntu1), binutils (= 2.34-5ubuntu1), binutils-common (= 2.34-5ubuntu1), binutils-riscv64-linux-gnu (= 2.34-5ubuntu1), bsdmainutils (= 11.1.2ubuntu3), bsdutils (= 1:2.34-0.1ubuntu8), build-essential (= 12.8ubuntu1), bzip2 (= 1.0.8-2), coreutils (= 8.30-3ubuntu2), cpp (= 4:9.3.0-1ubuntu2), cpp-9 (= 9.3.0-8ubuntu1), dash (= 0.5.10.2-6), debconf (= 1.5.73), debhelper (= 12.10ubuntu1), debianutils (= 4.9.1), dh-autoreconf (= 19), dh-strip-nondeterminism (= 1.6.3-2), diffutils (= 1:3.7-3), dpkg (= 1.19.7ubuntu3), dpkg-dev (= 1.19.7ubuntu3), dwz (= 0.13-5), file (= 1:5.38-4), findutils (= 4.7.0-1ubuntu1), g++ (= 4:9.3.0-1ubuntu2), g++-9 (= 9.3.0-8ubuntu1), gcc (= 4:9.3.0-1ubuntu2), gcc-10-base (= 10-20200324-1ubuntu1), gcc-9 (= 9.3.0-8ubuntu1), gcc-9-base (= 9.3.0-8ubuntu1), gettext (= 0.19.8.1-10build1), gettext-base (= 0.19.8.1-10build1), grep (= 3.4-1), groff-base (= 1.22.4-4build1), gzip (= 1.10-0ubuntu4), hostname (= 3.23), init-system-helpers (= 1.57), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.53-6), libarchive-zip-perl (= 1.67-2), libatomic1 (= 10-20200324-1ubuntu1), libattr1 (= 1:2.4.48-5), libaudit-common (= 1:2.8.5-2ubuntu6), libaudit1 (= 1:2.8.5-2ubuntu6), libbinutils (= 2.34-5ubuntu1), libblkid1 (= 2.34-0.1ubuntu8), libbsd0 (= 0.10.0-1), libbz2-1.0 (= 1.0.8-2), libc-bin (= 2.31-0ubuntu6~riscv64.1), libc-dev-bin (= 2.31-0ubuntu6~riscv64.1), libc6 (= 2.31-0ubuntu6~riscv64.1), libc6-dev (= 2.31-0ubuntu6~riscv64.1), libcap-ng0 (= 0.7.9-2.1build1), libcc1-0 (= 10-20200324-1ubuntu1), libcroco3 (= 0.6.13-1), libcrypt-dev (= 1:4.4.10-10ubuntu4), libcrypt1 (= 1:4.4.10-10ubuntu4), libctf-nobfd0 (= 2.34-5ubuntu1), libctf0 (= 2.34-5ubuntu1), libdb5.3 (= 5.3.28+dfsg1-0.6ubuntu2), libdebconfclient0 (= 0.251ubuntu1), libdebhelper-perl (= 12.10ubuntu1), libdpkg-perl (= 1.19.7ubuntu3), libelf1 (= 0.176-1.1build1), libffi7 (= 3.3-4), libfile-stripnondeterminism-perl (= 1.6.3-2), libgcc-9-dev (= 9.3.0-8ubuntu1), libgcc-s1 (= 10-20200324-1ubuntu1), libgcc1 (= 1:10-20200324-1ubuntu1), libgcrypt20 (= 1.8.5-5ubuntu1), libgdbm-compat4 (= 1.18.1-5), libgdbm6 (= 1.18.1-5), libglib2.0-0 (= 2.64.1-1), libgmp10 (= 2:6.2.0+dfsg-4), libgomp1 (= 10-20200324-1ubuntu1), libgpg-error0 (= 1.37-1), libicu66 (= 66.1-2ubuntu2), libisl22 (= 0.22.1-1), liblz4-1 (= 1.9.2-2), liblzma5 (= 5.2.4-1), libmagic-mgc (= 1:5.38-4), libmagic1 (= 1:5.38-4), libmount1 (= 2.34-0.1ubuntu8), libmpc3 (= 1.1.0-1), libmpfr6 (= 4.0.2-1), libpam-modules (= 1.3.1-5ubuntu4), libpam-modules-bin (= 1.3.1-5ubuntu4), libpam-runtime (= 1.3.1-5ubuntu4), libpam0g (= 1.3.1-5ubuntu4), libpcre2-8-0 (= 10.34-7), libpcre3 (= 2:8.39-12build1), libperl5.30 (= 5.30.0-9build1), libpipeline1 (= 1.5.2-2build1), libselinux1 (= 3.0-1build2), libsigsegv2 (= 2.12-2), libsmartcols1 (= 2.34-0.1ubuntu8), libstdc++-9-dev (= 9.3.0-8ubuntu1), libstdc++6 (= 10-20200324-1ubuntu1), libsub-override-perl (= 0.09-2), libsystemd0 (= 244.3-1ubuntu1), libtinfo6 (= 6.2-0ubuntu2), libtool (= 2.4.6-13), libuchardet0 (= 0.0.6-3build1), libudev1 (= 244.3-1ubuntu1), libunistring2 (= 0.9.10-2), libuuid1 (= 2.34-0.1ubuntu8), libxml2 (= 2.9.10+dfsg-4build1), libzstd1 (= 1.4.4+dfsg-3), linux-libc-dev (= 5.4.0-21.25), login (= 1:4.8.1-1ubuntu3), lsb-base (= 11.1.0ubuntu2), m4 (= 1.4.18-4), make (= 4.2.1-1.2), man-db (= 2.9.1-1), mawk (= 1.3.4.20200120-2), ncurses-base (= 6.2-0ubuntu2), ncurses-bin (= 6.2-0ubuntu2), patch (= 2.7.6-6), perl (= 5.30.0-9build1), perl-base (= 5.30.0-9build1), perl-modules-5.30 (= 5.30.0-9build1), po-debconf (= 1.0.21), sed (= 4.7-1), sensible-utils (= 0.0.12+nmu1), sysvinit-utils (= 2.96-2.1ubuntu1), tar (= 1.30+dfsg-7), tzdata (= 2019c-3ubuntu1), util-linux (= 2.34-0.1ubuntu8), xz-utils (= 5.2.4-1), zlib1g (= 1:1.2.11.dfsg-2ubuntu1), zlib1g-dev (= 1:1.2.11.dfsg-2ubuntu1) Environment: DEB_BUILD_OPTIONS="parallel=4" LANG="C.UTF-8" LC_ALL="C.UTF-8" SOURCE_DATE_EPOCH="1571427246" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libperlio-gzip-perl_0.19-1build5_riscv64.deb -------------------------------------------- new Debian package, version 2.0. size 13564 bytes: control archive=952 bytes. 752 bytes, 15 lines control 496 bytes, 6 lines md5sums Package: libperlio-gzip-perl Version: 0.19-1build5 Architecture: riscv64 Maintainer: Ubuntu Developers Original-Maintainer: Debian Perl Group Installed-Size: 44 Depends: perl (>= 5.30.0-9build1), perlapi-5.30.0, libc6 (>= 2.27), zlib1g (>= 1:1.1.4) Section: perl Priority: optional Homepage: https://metacpan.org/release/PerlIO-gzip Description: module providing a PerlIO layer to gzip/gunzip PerlIO::gzip is a Perl module that provides a PerlIO layer for manipulating files in the format used by the gzip program. Compression and decompression are both implemented, but cannot be used simultaneously (i.e. files cannot be opened for both reading and writing). drwxr-xr-x root/root 0 2019-10-18 19:34 ./ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/perl5/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/perl5/5.30/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/perl5/5.30/PerlIO/ -rw-r--r-- root/root 3286 2015-02-28 10:36 ./usr/lib/riscv64-linux-gnu/perl5/5.30/PerlIO/gzip.pm drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/perl5/5.30/auto/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/perl5/5.30/auto/PerlIO/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/perl5/5.30/auto/PerlIO/gzip/ -rw-r--r-- root/root 14536 2019-10-18 19:34 ./usr/lib/riscv64-linux-gnu/perl5/5.30/auto/PerlIO/gzip/gzip.so drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/share/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/share/doc/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/share/doc/libperlio-gzip-perl/ -rw-r--r-- root/root 1695 2015-02-28 10:36 ./usr/share/doc/libperlio-gzip-perl/README -rw-r--r-- root/root 1124 2019-10-18 19:34 ./usr/share/doc/libperlio-gzip-perl/changelog.Debian.gz -rw-r--r-- root/root 1095 2015-11-09 20:29 ./usr/share/doc/libperlio-gzip-perl/copyright drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/share/man/ drwxr-xr-x root/root 0 2019-10-18 19:34 ./usr/share/man/man3/ -rw-r--r-- root/root 2532 2019-10-18 19:34 ./usr/share/man/man3/PerlIO::gzip.3pm.gz +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not removing build depends: as requested +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: riscv64 Build Type: any Build-Space: 1132 Build-Time: 134 Distribution: focal Host Architecture: riscv64 Install-Time: 100 Job: libperlio-gzip-perl_0.19-1build5.dsc Machine Architecture: riscv64 Package: libperlio-gzip-perl Package-Time: 264 Source-Version: 0.19-1build5 Space: 1132 Status: successful Version: 0.19-1build5 -------------------------------------------------------------------------------- Finished at 2020-04-02T15:47:57Z Build needed 00:04:24, 1132k disk space RUN: /usr/share/launchpad-buildd/bin/in-target scan-for-processes --backend=chroot --series=focal --arch=riscv64 PACKAGEBUILD-19106460 Scanning for processes to kill in build PACKAGEBUILD-19106460 RUN: /usr/share/launchpad-buildd/bin/in-target umount-chroot --backend=chroot --series=focal --arch=riscv64 PACKAGEBUILD-19106460 Stopping target for build PACKAGEBUILD-19106460 RUN: /usr/share/launchpad-buildd/bin/in-target remove-build --backend=chroot --series=focal --arch=riscv64 PACKAGEBUILD-19106460 Removing build PACKAGEBUILD-19106460