RUN: /usr/share/launchpad-buildd/slavebin/slave-prep ['slave-prep'] Forking launchpad-buildd slave process... Kernel version: Linux z13-005 4.3.0-0-generic #9 SMP Tue Dec 1 18:12:15 CET 2015 s390x Buildd toolchain package versions: launchpad-buildd_136 python-lpbuildd_136 sbuild_0.66.0-5ubuntu1 dpkg-dev_1.18.3ubuntu1 python-debian_0.1.27ubuntu1. Syncing the system clock with the buildd NTP service... 3 Dec 23:23:51 ntpdate[54541]: adjust time server 10.211.37.1 offset 0.000078 sec RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'PACKAGEBUILD-8377771', '/home/buildd/filecache-default/3df25f02b9d734d9681420795f05ccdedf9e2f58'] Unpacking chroot for build PACKAGEBUILD-8377771 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'PACKAGEBUILD-8377771'] Mounting chroot for build PACKAGEBUILD-8377771 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'PACKAGEBUILD-8377771', 'deb http://ftpmaster.internal/ubuntu xenial main'] Overriding sources.list in build-PACKAGEBUILD-8377771 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'PACKAGEBUILD-8377771', 's390x'] Updating debian chroot for build PACKAGEBUILD-8377771 Get:1 http://ftpmaster.internal xenial InRelease [227 kB] Ign http://archive-team.internal xenial InRelease Ign http://archive-team.internal xenial Release.gpg Hit http://archive-team.internal xenial Release Ign http://archive-team.internal xenial/main s390x Packages/DiffIndex Hit http://archive-team.internal xenial/main Translation-en Hit http://archive-team.internal xenial/main s390x Packages Get:2 http://ftpmaster.internal xenial/main s390x Packages [772 kB] Get:3 http://ftpmaster.internal xenial/main Translation-en [844 kB] Fetched 1842 kB in 1s (1274 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages have been kept back: libc6-dev The following packages will be upgraded: coreutils cpp dpkg g++ gcc gnupg gpgv libc6 libcurl3-gnutls libdb5.3 libsasl2-2 11 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. Need to get 9345 kB of archives. After this operation, 10.9 MB disk space will be freed. Get:1 http://ftpmaster.internal/ubuntu/ xenial/main coreutils s390x 8.23-4ubuntu2 [1159 kB] Get:2 http://ftpmaster.internal/ubuntu/ xenial/main dpkg s390x 1.18.3ubuntu1 [2109 kB] Get:3 http://ftpmaster.internal/ubuntu/ xenial/main libc6 s390x 2.21-0ubuntu4 [4436 kB] Get:4 http://ftpmaster.internal/ubuntu/ xenial/main gpgv s390x 1.4.19-6ubuntu1 [160 kB] Get:5 http://ftpmaster.internal/ubuntu/ xenial/main gnupg s390x 1.4.19-6ubuntu1 [610 kB] Get:6 http://ftpmaster.internal/ubuntu/ xenial/main libdb5.3 s390x 5.3.28-11 [617 kB] Get:7 http://ftpmaster.internal/ubuntu/ xenial/main libcurl3-gnutls s390x 7.45.0-1ubuntu1 [173 kB] Get:8 http://ftpmaster.internal/ubuntu/ xenial/main libsasl2-2 s390x 2.1.26.dfsg1-14 [46.8 kB] Get:9 http://ftpmaster.internal/ubuntu/ xenial/main cpp s390x 4:5.2.1-16ubuntu2 [27.6 kB] Get:10 http://ftpmaster.internal/ubuntu/ xenial/main gcc s390x 4:5.2.1-16ubuntu2 [5214 B] Get:11 http://ftpmaster.internal/ubuntu/ xenial/main g++ s390x 4:5.2.1-16ubuntu2 [1494 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 9345 kB in 4s (2018 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11805 files and directories currently installed.) Preparing to unpack .../coreutils_8.23-4ubuntu2_s390x.deb ... Unpacking coreutils (8.23-4ubuntu2) over (8.23-4ubuntu2) ... Setting up coreutils (8.23-4ubuntu2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11761 files and directories currently installed.) Preparing to unpack .../dpkg_1.18.3ubuntu1_s390x.deb ... Unpacking dpkg (1.18.3ubuntu1) over (1.18.3ubuntu1) ... Setting up dpkg (1.18.3ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11761 files and directories currently installed.) Preparing to unpack .../libc6_2.21-0ubuntu4_s390x.deb ... Unpacking libc6:s390x (2.21-0ubuntu4) over (2.21-0ubuntu4) ... Setting up libc6:s390x (2.21-0ubuntu4) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11761 files and directories currently installed.) Preparing to unpack .../gpgv_1.4.19-6ubuntu1_s390x.deb ... Unpacking gpgv (1.4.19-6ubuntu1) over (1.4.19-6ubuntu1) ... Setting up gpgv (1.4.19-6ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11761 files and directories currently installed.) Preparing to unpack .../gnupg_1.4.19-6ubuntu1_s390x.deb ... Unpacking gnupg (1.4.19-6ubuntu1) over (1.4.19-6ubuntu1) ... Setting up gnupg (1.4.19-6ubuntu1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11726 files and directories currently installed.) Preparing to unpack .../libdb5.3_5.3.28-11_s390x.deb ... Unpacking libdb5.3:s390x (5.3.28-11) over (5.3.28-11) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... Setting up libdb5.3:s390x (5.3.28-11) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11726 files and directories currently installed.) Preparing to unpack .../libcurl3-gnutls_7.45.0-1ubuntu1_s390x.deb ... Unpacking libcurl3-gnutls:s390x (7.45.0-1ubuntu1) over (7.45.0-1ubuntu1) ... Preparing to unpack .../libsasl2-2_2.1.26.dfsg1-14_s390x.deb ... Unpacking libsasl2-2:s390x (2.1.26.dfsg1-14) over (2.1.26.dfsg1-14) ... Preparing to unpack .../cpp_4%3a5.2.1-16ubuntu2_s390x.deb ... Unpacking cpp (4:5.2.1-16ubuntu2) over (4:5.2.1-13ubuntu8) ... Preparing to unpack .../gcc_4%3a5.2.1-16ubuntu2_s390x.deb ... Removing old gcc doc directory. Unpacking gcc (4:5.2.1-16ubuntu2) over (4:5.2.1-13ubuntu8) ... Preparing to unpack .../g++_4%3a5.2.1-16ubuntu2_s390x.deb ... Unpacking g++ (4:5.2.1-16ubuntu2) over (4:5.2.1-13ubuntu8) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... Setting up libcurl3-gnutls:s390x (7.45.0-1ubuntu1) ... Setting up libsasl2-2:s390x (2.1.26.dfsg1-14) ... Setting up cpp (4:5.2.1-16ubuntu2) ... Setting up gcc (4:5.2.1-16ubuntu2) ... Setting up g++ (4:5.2.1-16ubuntu2) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'PACKAGEBUILD-8377771', 's390x', 'xenial', '-c', 'chroot:autobuild', '--arch=s390x', '--dist=xenial', '--purge=never', '--nolog', 'libperlio-gzip-perl_0.19-1.dsc'] Initiating build PACKAGEBUILD-8377771 with 4 jobs across 4 processor cores. Kernel reported to sbuild: 4.3.0-0-generic #9 SMP Tue Dec 1 18:12:15 CET 2015 s390x sbuild (Debian sbuild) 0.66.0 (04 Oct 2015) on z13-005.buildd +==============================================================================+ | libperlio-gzip-perl 0.19-1 (s390x) 03 Dec 2015 23:24 | +==============================================================================+ Package: libperlio-gzip-perl Version: 0.19-1 Source Version: 0.19-1 Distribution: xenial Machine Architecture: s390x Host Architecture: s390x Build Architecture: s390x I: NOTICE: Log filtering will replace 'build/libperlio-gzip-perl-q2oMwx/libperlio-gzip-perl-0.19' with '<>' I: NOTICE: Log filtering will replace 'build/libperlio-gzip-perl-q2oMwx' with '<>' I: NOTICE: Log filtering will replace 'home/buildd/build-PACKAGEBUILD-8377771/chroot-autobuild' with '<>' +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- libperlio-gzip-perl_0.19-1.dsc exists in .; copying to chroot Check architectures ------------------- Check dependencies ------------------ Merged Build-Depends: build-essential, fakeroot Filtered Build-Depends: build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-core-dummy' in '/<>/resolver-cs4rGL/apt_archive/sbuild-build-depends-core-dummy.deb'. Ign file: ./ InRelease Ign file: ./ Release.gpg Get:1 file: ./ Release [2119 B] Ign file: ./ Translation-en Reading package lists... Reading package lists... +------------------------------------------------------------------------------+ | Install core build dependencies (apt-based resolver) | +------------------------------------------------------------------------------+ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: sbuild-build-depends-core-dummy 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded. Need to get 0 B/772 B of archives. After this operation, 0 B of additional disk space will be used. WARNING: The following packages cannot be authenticated! sbuild-build-depends-core-dummy debconf: delaying package configuration, since apt-utils is not installed Authentication warning overridden. Selecting previously unselected package sbuild-build-depends-core-dummy. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11730 files and directories currently installed.) Preparing to unpack .../sbuild-build-depends-core-dummy.deb ... Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ... Setting up sbuild-build-depends-core-dummy (0.invalid.0) ... Merged Build-Depends: perl, debhelper (>= 9.20120312~), zlib1g-dev Filtered Build-Depends: perl, debhelper (>= 9.20120312~), zlib1g-dev dpkg-deb: building package 'sbuild-build-depends-libperlio-gzip-perl-dummy' in '/<>/resolver-mIIQ4t/apt_archive/sbuild-build-depends-libperlio-gzip-perl-dummy.deb'. Ign file: ./ InRelease Ign file: ./ Release.gpg Get:1 file: ./ Release [2119 B] Ign file: ./ Translation-en Reading package lists... Reading package lists... +------------------------------------------------------------------------------+ | Install libperlio-gzip-perl build dependencies (apt-based resolver) | +------------------------------------------------------------------------------+ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils debhelper dh-strip-nondeterminism file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasprintf0v5 libcroco3 libfile-stripnondeterminism-perl libglib2.0-0 libicu55 libmagic1 libpipeline1 libtimedate-perl libunistring0 libxml2 man-db po-debconf zlib1g-dev Suggested packages: wamerican wordlist whois vacation dh-make gettext-doc groff less www-browser libmail-box-perl Recommended packages: curl wget lynx-cur libasprintf-dev libgettextpo-dev libglib2.0-data shared-mime-info xdg-user-dirs xml-core libmail-sendmail-perl The following NEW packages will be installed: bsdmainutils debhelper dh-strip-nondeterminism file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasprintf0v5 libcroco3 libfile-stripnondeterminism-perl libglib2.0-0 libicu55 libmagic1 libpipeline1 libtimedate-perl libunistring0 libxml2 man-db po-debconf sbuild-build-depends-libperlio-gzip-perl-dummy zlib1g-dev 0 upgraded, 23 newly installed, 0 to remove and 1 not upgraded. Need to get 14.2 MB/14.2 MB of archives. After this operation, 57.9 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libasprintf0v5 groff-base file libfile-stripnondeterminism-perl dh-strip-nondeterminism sbuild-build-depends-libperlio-gzip-perl-dummy Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ xenial/main libasprintf0v5 s390x 0.19.4-1ubuntu3 [6638 B] Get:2 http://ftpmaster.internal/ubuntu/ xenial/main groff-base s390x 1.22.3-4 [1199 kB] Get:3 http://ftpmaster.internal/ubuntu/ xenial/main bsdmainutils s390x 9.0.6ubuntu1 [178 kB] Get:4 http://ftpmaster.internal/ubuntu/ xenial/main libpipeline1 s390x 1.4.1-1 [24.7 kB] Get:5 http://ftpmaster.internal/ubuntu/ xenial/main man-db s390x 2.7.5-1 [850 kB] Get:6 http://ftpmaster.internal/ubuntu/ xenial/main libmagic1 s390x 1:5.25-2ubuntu1 [214 kB] Get:7 http://ftpmaster.internal/ubuntu/ xenial/main file s390x 1:5.25-2ubuntu1 [21.5 kB] Get:8 http://ftpmaster.internal/ubuntu/ xenial/main gettext-base s390x 0.19.4-1ubuntu3 [48.3 kB] Get:9 http://ftpmaster.internal/ubuntu/ xenial/main libglib2.0-0 s390x 2.47.3-3 [1041 kB] Get:10 http://ftpmaster.internal/ubuntu/ xenial/main libicu55 s390x 55.1-6ubuntu1 [7478 kB] Get:11 http://ftpmaster.internal/ubuntu/ xenial/main libxml2 s390x 2.9.2+zdfsg1-4ubuntu1 [640 kB] Get:12 http://ftpmaster.internal/ubuntu/ xenial/main libcroco3 s390x 0.6.9-1 [77.2 kB] Get:13 http://ftpmaster.internal/ubuntu/ xenial/main libunistring0 s390x 0.9.3-5.2ubuntu1 [262 kB] Get:14 http://ftpmaster.internal/ubuntu/ xenial/main gettext s390x 0.19.4-1ubuntu3 [838 kB] Get:15 http://ftpmaster.internal/ubuntu/ xenial/main intltool-debian all 0.35.0+20060710.4 [24.9 kB] Get:16 http://ftpmaster.internal/ubuntu/ xenial/main po-debconf all 1.0.18 [234 kB] Get:17 http://ftpmaster.internal/ubuntu/ xenial/main libarchive-zip-perl all 1.53-1 [87.0 kB] Get:18 http://ftpmaster.internal/ubuntu/ xenial/main libfile-stripnondeterminism-perl all 0.014-1 [10.1 kB] Get:19 http://ftpmaster.internal/ubuntu/ xenial/main libtimedate-perl all 2.3000-2 [37.5 kB] Get:20 http://ftpmaster.internal/ubuntu/ xenial/main dh-strip-nondeterminism all 0.014-1 [5596 B] Get:21 http://ftpmaster.internal/ubuntu/ xenial/main debhelper all 9.20151126ubuntu1 [741 kB] Get:22 http://ftpmaster.internal/ubuntu/ xenial/main zlib1g-dev s390x 1:1.2.8.dfsg-2ubuntu4 [168 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 14.2 MB in 7s (1952 kB/s) Selecting previously unselected package libasprintf0v5:s390x. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11730 files and directories currently installed.) Preparing to unpack .../libasprintf0v5_0.19.4-1ubuntu3_s390x.deb ... Unpacking libasprintf0v5:s390x (0.19.4-1ubuntu3) ... Selecting previously unselected package groff-base. Preparing to unpack .../groff-base_1.22.3-4_s390x.deb ... Unpacking groff-base (1.22.3-4) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../bsdmainutils_9.0.6ubuntu1_s390x.deb ... Unpacking bsdmainutils (9.0.6ubuntu1) ... Selecting previously unselected package libpipeline1:s390x. Preparing to unpack .../libpipeline1_1.4.1-1_s390x.deb ... Unpacking libpipeline1:s390x (1.4.1-1) ... Selecting previously unselected package man-db. Preparing to unpack .../man-db_2.7.5-1_s390x.deb ... Unpacking man-db (2.7.5-1) ... Selecting previously unselected package libmagic1:s390x. Preparing to unpack .../libmagic1_1%3a5.25-2ubuntu1_s390x.deb ... Unpacking libmagic1:s390x (1:5.25-2ubuntu1) ... Selecting previously unselected package file. Preparing to unpack .../file_1%3a5.25-2ubuntu1_s390x.deb ... Unpacking file (1:5.25-2ubuntu1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../gettext-base_0.19.4-1ubuntu3_s390x.deb ... Unpacking gettext-base (0.19.4-1ubuntu3) ... Selecting previously unselected package libglib2.0-0:s390x. Preparing to unpack .../libglib2.0-0_2.47.3-3_s390x.deb ... Unpacking libglib2.0-0:s390x (2.47.3-3) ... Selecting previously unselected package libicu55:s390x. Preparing to unpack .../libicu55_55.1-6ubuntu1_s390x.deb ... Unpacking libicu55:s390x (55.1-6ubuntu1) ... Selecting previously unselected package libxml2:s390x. Preparing to unpack .../libxml2_2.9.2+zdfsg1-4ubuntu1_s390x.deb ... Unpacking libxml2:s390x (2.9.2+zdfsg1-4ubuntu1) ... Selecting previously unselected package libcroco3:s390x. Preparing to unpack .../libcroco3_0.6.9-1_s390x.deb ... Unpacking libcroco3:s390x (0.6.9-1) ... Selecting previously unselected package libunistring0:s390x. Preparing to unpack .../libunistring0_0.9.3-5.2ubuntu1_s390x.deb ... Unpacking libunistring0:s390x (0.9.3-5.2ubuntu1) ... Selecting previously unselected package gettext. Preparing to unpack .../gettext_0.19.4-1ubuntu3_s390x.deb ... Unpacking gettext (0.19.4-1ubuntu3) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../intltool-debian_0.35.0+20060710.4_all.deb ... Unpacking intltool-debian (0.35.0+20060710.4) ... Selecting previously unselected package po-debconf. Preparing to unpack .../po-debconf_1.0.18_all.deb ... Unpacking po-debconf (1.0.18) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../libarchive-zip-perl_1.53-1_all.deb ... Unpacking libarchive-zip-perl (1.53-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../libfile-stripnondeterminism-perl_0.014-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (0.014-1) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../libtimedate-perl_2.3000-2_all.deb ... Unpacking libtimedate-perl (2.3000-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../dh-strip-nondeterminism_0.014-1_all.deb ... Unpacking dh-strip-nondeterminism (0.014-1) ... Selecting previously unselected package debhelper. Preparing to unpack .../debhelper_9.20151126ubuntu1_all.deb ... Unpacking debhelper (9.20151126ubuntu1) ... Selecting previously unselected package zlib1g-dev:s390x. Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-2ubuntu4_s390x.deb ... Unpacking zlib1g-dev:s390x (1:1.2.8.dfsg-2ubuntu4) ... Selecting previously unselected package sbuild-build-depends-libperlio-gzip-perl-dummy. Preparing to unpack .../sbuild-build-depends-libperlio-gzip-perl-dummy.deb ... Unpacking sbuild-build-depends-libperlio-gzip-perl-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... Setting up libasprintf0v5:s390x (0.19.4-1ubuntu3) ... Setting up groff-base (1.22.3-4) ... Setting up bsdmainutils (9.0.6ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libpipeline1:s390x (1.4.1-1) ... Setting up man-db (2.7.5-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libmagic1:s390x (1:5.25-2ubuntu1) ... Setting up file (1:5.25-2ubuntu1) ... Setting up gettext-base (0.19.4-1ubuntu3) ... Setting up libglib2.0-0:s390x (2.47.3-3) ... No schema files found: doing nothing. Setting up libicu55:s390x (55.1-6ubuntu1) ... Setting up libxml2:s390x (2.9.2+zdfsg1-4ubuntu1) ... Setting up libcroco3:s390x (0.6.9-1) ... Setting up libunistring0:s390x (0.9.3-5.2ubuntu1) ... Setting up gettext (0.19.4-1ubuntu3) ... Setting up intltool-debian (0.35.0+20060710.4) ... Setting up po-debconf (1.0.18) ... Setting up libarchive-zip-perl (1.53-1) ... Setting up libfile-stripnondeterminism-perl (0.014-1) ... Setting up libtimedate-perl (2.3000-2) ... Setting up zlib1g-dev:s390x (1:1.2.8.dfsg-2ubuntu4) ... Setting up debhelper (9.20151126ubuntu1) ... Setting up sbuild-build-depends-libperlio-gzip-perl-dummy (0.invalid.0) ... Setting up dh-strip-nondeterminism (0.014-1) ... Processing triggers for libc-bin (2.21-0ubuntu4) ... +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 4.3.0-0-generic s390x (s390x) Toolchain package versions: binutils_2.25.90.20151125-2ubuntu1 dpkg-dev_1.18.3ubuntu1 g++-5_5.2.1-27ubuntu1 gcc-5_5.2.1-27ubuntu1 libc6-dev_2.21-0ubuntu4 libstdc++-5-dev_5.2.1-27ubuntu1 libstdc++6_5.2.1-27ubuntu1 linux-libc-dev_4.3.0-0.9 Package versions: adduser_3.113+nmu3ubuntu4 advancecomp_1.20-1 apt_1.0.10.2ubuntu1 apt-transport-https_1.0.10.2ubuntu1 base-files_9.4ubuntu3 base-passwd_3.5.38 bash_4.3-14ubuntu1 binutils_2.25.90.20151125-2ubuntu1 bsdmainutils_9.0.6ubuntu1 bsdutils_1:2.27.1-1ubuntu3 build-essential_12.1ubuntu2 bzip2_1.0.6-8 ca-certificates_20150426ubuntu1 coreutils_8.23-4ubuntu2 cpp_4:5.2.1-16ubuntu2 cpp-5_5.2.1-27ubuntu1 dash_0.5.7-4ubuntu2 debconf_1.5.58ubuntu1 debhelper_9.20151126ubuntu1 debianutils_4.5.1 dh-strip-nondeterminism_0.014-1 diffutils_1:3.3-2 dmsetup_2:1.02.99-1ubuntu1 dpkg_1.18.3ubuntu1 dpkg-dev_1.18.3ubuntu1 e2fslibs_1.42.13-1ubuntu1 e2fsprogs_1.42.13-1ubuntu1 fakeroot_1.20.2-1ubuntu1 file_1:5.25-2ubuntu1 findutils_4.4.2-10 g++_4:5.2.1-16ubuntu2 g++-5_5.2.1-27ubuntu1 gcc_4:5.2.1-16ubuntu2 gcc-5_5.2.1-27ubuntu1 gcc-5-base_5.2.1-27ubuntu1 gettext_0.19.4-1ubuntu3 gettext-base_0.19.4-1ubuntu3 gnupg_1.4.19-6ubuntu1 gpgv_1.4.19-6ubuntu1 grep_2.21-2 groff-base_1.22.3-4 gzip_1.6-4ubuntu1 hostname_3.16ubuntu2 init_1.24ubuntu2 initscripts_2.88dsf-59.2ubuntu3 insserv_1.14.0-5ubuntu3 intltool-debian_0.35.0+20060710.4 libacl1_2.2.52-2 libapparmor1_2.10-0ubuntu8 libapt-pkg4.16_1.0.10.2ubuntu1 libarchive-zip-perl_1.53-1 libasn1-8-heimdal_1.6~rc2+dfsg-10ubuntu1 libasprintf0v5_0.19.4-1ubuntu3 libatomic1_5.2.1-27ubuntu1 libattr1_1:2.4.47-2 libaudit-common_1:2.4.4-4ubuntu1 libaudit1_1:2.4.4-4ubuntu1 libblkid1_2.27.1-1ubuntu3 libbz2-1.0_1.0.6-8 libc-bin_2.21-0ubuntu4 libc-dev-bin_2.21-0ubuntu4 libc6_2.21-0ubuntu4 libc6-dev_2.21-0ubuntu4 libcap2_1:2.24-12 libcap2-bin_1:2.24-12 libcc1-0_5.2.1-27ubuntu1 libcomerr2_1.42.13-1ubuntu1 libcroco3_0.6.9-1 libcryptsetup4_2:1.6.6-5ubuntu2 libcurl3-gnutls_7.45.0-1ubuntu1 libdb5.3_5.3.28-11 libdebconfclient0_0.198ubuntu1 libdevmapper1.02.1_2:1.02.99-1ubuntu1 libdpkg-perl_1.18.3ubuntu1 libfakeroot_1.20.2-1ubuntu1 libfdisk1_2.27.1-1ubuntu3 libffi6_3.2.1-3 libfile-stripnondeterminism-perl_0.014-1 libgcc-5-dev_5.2.1-27ubuntu1 libgcc1_1:5.2.1-27ubuntu1 libgcrypt20_1.6.4-3 libgdbm3_1.8.3-13.1 libglib2.0-0_2.47.3-3 libgmp10_2:6.1.0+dfsg-2 libgnutls-deb0-28_3.3.18-1ubuntu1 libgomp1_5.2.1-27ubuntu1 libgpg-error0_1.20-1 libgssapi-krb5-2_1.13.2+dfsg-4 libgssapi3-heimdal_1.6~rc2+dfsg-10ubuntu1 libhcrypto4-heimdal_1.6~rc2+dfsg-10ubuntu1 libheimbase1-heimdal_1.6~rc2+dfsg-10ubuntu1 libheimntlm0-heimdal_1.6~rc2+dfsg-10ubuntu1 libhogweed4_3.1.1-4 libhx509-5-heimdal_1.6~rc2+dfsg-10ubuntu1 libicu55_55.1-6ubuntu1 libidn11_1.32-3ubuntu1 libisl15_0.15-3 libk5crypto3_1.13.2+dfsg-4 libkeyutils1_1.5.9-5ubuntu1 libkmod2_21-1ubuntu1 libkrb5-26-heimdal_1.6~rc2+dfsg-10ubuntu1 libkrb5-3_1.13.2+dfsg-4 libkrb5support0_1.13.2+dfsg-4 libldap-2.4-2_2.4.41+dfsg-1ubuntu2 liblockfile-bin_1.09-6ubuntu1 liblockfile1_1.09-6ubuntu1 liblzma5_5.1.1alpha+20120614-2ubuntu2 libmagic1_1:5.25-2ubuntu1 libmount1_2.27.1-1ubuntu3 libmpc3_1.0.3-1 libmpfr4_3.1.3-1 libncurses5_5.9+20150516-2ubuntu1 libncursesw5_5.9+20150516-2ubuntu1 libnettle6_3.1.1-4 libp11-kit0_0.23.1-3 libpam-modules_1.1.8-3.1ubuntu3 libpam-modules-bin_1.1.8-3.1ubuntu3 libpam-runtime_1.1.8-3.1ubuntu3 libpam0g_1.1.8-3.1ubuntu3 libpcre3_2:8.35-7.1ubuntu1 libpipeline1_1.4.1-1 libpng12-0_1.2.54-1 libprocps3_1:3.3.9-1ubuntu8 libreadline6_6.3-8ubuntu1 libroken18-heimdal_1.6~rc2+dfsg-10ubuntu1 librtmp1_2.4+20150115.gita107cef-1build1 libsasl2-2_2.1.26.dfsg1-14 libsasl2-modules-db_2.1.26.dfsg1-14 libseccomp2_2.2.3-2ubuntu1 libselinux1_2.3-2build1 libsemanage-common_2.3-1build2 libsemanage1_2.3-1build2 libsepol1_2.4-2 libslang2_2.3.0-2ubuntu1 libsmartcols1_2.27.1-1ubuntu3 libsqlite3-0_3.9.1-2 libss2_1.42.13-1ubuntu1 libssl1.0.0_1.0.2d-0ubuntu2 libstdc++-5-dev_5.2.1-27ubuntu1 libstdc++6_5.2.1-27ubuntu1 libsystemd0_228-2ubuntu1 libtasn1-6_4.7-2 libtimedate-perl_2.3000-2 libtinfo5_5.9+20150516-2ubuntu1 libudev1_228-2ubuntu1 libunistring0_0.9.3-5.2ubuntu1 libusb-0.1-4_2:0.1.12-27 libustr-1.0-1_1.0.4-5 libuuid1_2.27.1-1ubuntu3 libwind0-heimdal_1.6~rc2+dfsg-10ubuntu1 libxml2_2.9.2+zdfsg1-4ubuntu1 linux-libc-dev_4.3.0-0.9 lockfile-progs_0.1.17 login_1:4.1.5.1-1.1ubuntu7 lsb-base_9.20150917ubuntu1 make_4.0-8.2 man-db_2.7.5-1 mawk_1.3.3-17ubuntu2 mount_2.27.1-1ubuntu3 multiarch-support_2.21-0ubuntu4 ncurses-base_5.9+20150516-2ubuntu1 ncurses-bin_5.9+20150516-2ubuntu1 openssl_1.0.2d-0ubuntu2 optipng_0.7.5-1 passwd_1:4.1.5.1-1.1ubuntu7 patch_2.7.5-1 perl_5.20.2-6 perl-base_5.20.2-6 perl-modules_5.20.2-6 pkg-create-dbgsym_0.70 pkgbinarymangler_122 po-debconf_1.0.18 policyrcd-script-zg2_0.1-2 procps_1:3.3.9-1ubuntu8 readline-common_6.3-8ubuntu1 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libperlio-gzip-perl-dummy_0.invalid.0 sed_4.2.2-6.1 sensible-utils_0.0.9 systemd_228-2ubuntu1 systemd-sysv_228-2ubuntu1 sysv-rc_2.88dsf-59.2ubuntu3 sysvinit-utils_2.88dsf-59.2ubuntu3 tar_1.28-2.1 tzdata_2015g-1 ubuntu-keyring_2012.05.19 udev_228-2ubuntu1 util-linux_2.27.1-1ubuntu3 xz-utils_5.1.1alpha+20120614-2ubuntu2 zlib1g_1:1.2.8.dfsg-2ubuntu4 zlib1g-dev_1:1.2.8.dfsg-2ubuntu4 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- gpgv: Signature made Mon Nov 9 20:30:59 2015 UTC using RSA key ID 8649AA06 gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./libperlio-gzip-perl_0.19-1.dsc dpkg-source: info: extracting libperlio-gzip-perl in libperlio-gzip-perl-0.19 dpkg-source: info: unpacking libperlio-gzip-perl_0.19.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.19-1.debian.tar.xz Check disc space ---------------- Sufficient free space for build User Environment ---------------- DEB_BUILD_OPTIONS=parallel=4 HOME=/home/buildd LANG=C LOGNAME=buildd MAIL=/var/mail/buildd OLDPWD=/ PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games PWD=/<> SHELL=/bin/sh SUDO_COMMAND=/usr/sbin/chroot /<> su buildd -s /bin/sh -c cd '/<>' && 'env' SUDO_GID=2501 SUDO_UID=2001 SUDO_USER=buildd TERM=unknown USER=buildd USERNAME=root dpkg-buildpackage ----------------- dpkg-buildpackage: source package libperlio-gzip-perl dpkg-buildpackage: source version 0.19-1 dpkg-buildpackage: source distribution unstable dpkg-source --before-build libperlio-gzip-perl-0.19 dpkg-buildpackage: host architecture s390x fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean dh_clean debian/rules build-arch dh build-arch dh_testdir -a dh_auto_configure -a perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2" "LD=cc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build -a make -j1 make[1]: Entering directory '/<>' cp gzip.pm blib/lib/PerlIO/gzip.pm Running Mkbootstrap for PerlIO::gzip () chmod 644 gzip.bs /usr/bin/perl /usr/share/perl/5.20/ExtUtils/xsubpp -typemap /usr/share/perl/5.20/ExtUtils/typemap gzip.xs > gzip.xsc && mv gzip.xsc gzip.c cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"0.19\" -DXS_VERSION=\"0.19\" -fPIC "-I/usr/lib/s390x-linux-gnu/perl/5.20/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so cc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so /usr/bin/perl -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying blib/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/<>' dh_auto_test -a make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' Running Mkbootstrap for PerlIO::gzip () chmod 644 gzip.bs PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 141720 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 141720 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 141720 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 141720 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.21 cusr 0.00 csys = 0.25 CPU) Result: PASS make[1]: Leaving directory '/<>' fakeroot debian/rules binary-arch dh binary-arch dh_testroot -a dh_prep -a dh_auto_install -a make -j1 install DESTDIR=/<>/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /<>/debian/libperlio-gzip-perl/usr/lib/s390x-linux-gnu/perl5/5.20/auto/PerlIO/gzip/gzip.so Installing /<>/debian/libperlio-gzip-perl/usr/lib/s390x-linux-gnu/perl5/5.20/PerlIO/gzip.pm Installing /<>/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/<>' dh_installdocs -a dh_installchangelogs -a dh_installman -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_strip -a dh_strip debug symbol extraction: enabling -a due to Build-Debug-Symbols: yes in /CurrentlyBuilding dh_strip debug symbol extraction: all non-arch-all packages for this build platform s390x: libperlio-gzip-perl dh_strip debug symbol extraction: packages to act on: libperlio-gzip-perl dh_strip debug symbol extraction: ignored packages: Using buildid for compat level >= 9 dpkg-gencontrol: warning: -is is deprecated; it is without effect dpkg-gencontrol: warning: -ip is deprecated; it is without effect dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-gencontrol: warning: package libperlio-gzip-perl: unused substitution variable ${perl:Depends} /usr/bin/pkg_create_dbgsym: deferring build of .ddeb to dh_gencontrol dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_gencontrol debug symbol wrapper: all non-arch-all packages for this build platform s390x: libperlio-gzip-perl dh_gencontrol debug symbol wrapper: packages to act on: libperlio-gzip-perl dh_gencontrol debug symbol wrapper: ignored packages: dh_gencontrol debug symbol wrapper: processing package libperlio-gzip-perl (pkgdir debian/libperlio-gzip-perl, ddeb package dir debian/libperlio-gzip-perl-dbgsym) dh_gencontrol debug symbol wrapper: building libperlio-gzip-perl-dbgsym_0.19-1_s390x.ddeb dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.19-1_s390x.ddeb'. dh_gencontrol debug symbol wrapper: dpkg-distaddfile libperlio-gzip-perl-dbgsym_0.19-1_s390x.ddeb perl extra dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_md5sums -a dh_builddeb -a INFO: pkgstriptranslations version 122 pkgstriptranslations: processing libperlio-gzip-perl (in debian/libperlio-gzip-perl); do_strip: 1, oemstrip: pkgstriptranslations: libperlio-gzip-perl does not contain translations, skipping pkgstriptranslations: no translation files, not creating tarball pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libperlio-gzip-perl/DEBIAN/control, package libperlio-gzip-perl, directory debian/libperlio-gzip-perl pkgstripfiles: PNG optimization for package libperlio-gzip-perl took 0 s dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.19-1_s390x.deb'. dpkg-genchanges -B -mLaunchpad Build Daemon >../libperlio-gzip-perl_0.19-1_s390x.changes dpkg-genchanges: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build libperlio-gzip-perl-0.19 dpkg-buildpackage: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 20151203-2324 Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Post Build Chroot | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libperlio-gzip-perl_0.19-1_s390x.changes: ----------------------------------------- Format: 1.8 Date: Mon, 09 Nov 2015 21:29:41 +0100 Source: libperlio-gzip-perl Binary: libperlio-gzip-perl Architecture: s390x Version: 0.19-1 Distribution: xenial Urgency: medium Maintainer: Launchpad Build Daemon Changed-By: gregor herrmann Description: libperlio-gzip-perl - module providing a PerlIO layer to gzip/gunzip Changes: libperlio-gzip-perl (0.19-1) unstable; urgency=medium . * Team upload. . [ Salvatore Bonaccorso ] * Update Vcs-Browser URL to cgit web frontend . [ gregor herrmann ] * New upstream release. * Drop PerlIO-gzip-0.18-RT92412.patch which was taken from CPAN RT and is included now. * Mark package as autopkgtest-able. * Declare compliance with Debian Policy 3.9.6. Checksums-Sha1: 772ae6e0971a88a7fe063f6d9104a8757c4ddffb 25832 libperlio-gzip-perl-dbgsym_0.19-1_s390x.ddeb ba2f1bfb63ee92efd0cd64312785e6d489d8e092 14678 libperlio-gzip-perl_0.19-1_s390x.deb Checksums-Sha256: c8d87940f44963a7be83d8a6e5ef4cf16670dd4145c9cf2e5c76a2b467d944f1 25832 libperlio-gzip-perl-dbgsym_0.19-1_s390x.ddeb 2de91af24364cd7232fc318464b30f9155cd114dd0c69732bb6a2cbe0baff692 14678 libperlio-gzip-perl_0.19-1_s390x.deb Files: 050220fa9e30bd9879a8ec2cc2d15f7d 25832 perl extra libperlio-gzip-perl-dbgsym_0.19-1_s390x.ddeb b579df451c8671526c2e460caa94d16c 14678 perl optional libperlio-gzip-perl_0.19-1_s390x.deb +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libperlio-gzip-perl_0.19-1_s390x.deb ------------------------------------ new debian package, version 2.0. size 14678 bytes: control archive=862 bytes. 737 bytes, 15 lines control 492 bytes, 6 lines md5sums Package: libperlio-gzip-perl Version: 0.19-1 Architecture: s390x Maintainer: Ubuntu Developers Original-Maintainer: Debian Perl Group Installed-Size: 48 Depends: perl (>= 5.20.2-6), perlapi-5.20.2, libc6 (>= 2.4), zlib1g (>= 1:1.1.4) Section: perl Priority: optional Homepage: https://metacpan.org/release/PerlIO-gzip Description: module providing a PerlIO layer to gzip/gunzip PerlIO::gzip is a Perl module that provides a PerlIO layer for manipulating files in the format used by the gzip program. Compression and decompression are both implemented, but cannot be used simultaneously (i.e. files cannot be opened for both reading and writing). drwxr-xr-x root/root 0 2015-12-03 23:24 ./ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/perl5/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/perl5/5.20/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/perl5/5.20/PerlIO/ -rw-r--r-- root/root 3286 2015-02-28 10:36 ./usr/lib/s390x-linux-gnu/perl5/5.20/PerlIO/gzip.pm drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/perl5/5.20/auto/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/perl5/5.20/auto/PerlIO/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/perl5/5.20/auto/PerlIO/gzip/ -rw-r--r-- root/root 18936 2015-12-03 23:24 ./usr/lib/s390x-linux-gnu/perl5/5.20/auto/PerlIO/gzip/gzip.so drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/share/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/share/doc/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/share/doc/libperlio-gzip-perl/ -rw-r--r-- root/root 1695 2015-02-28 10:36 ./usr/share/doc/libperlio-gzip-perl/README -rw-r--r-- root/root 853 2015-11-09 20:29 ./usr/share/doc/libperlio-gzip-perl/changelog.Debian.gz -rw-r--r-- root/root 1095 2015-11-09 20:29 ./usr/share/doc/libperlio-gzip-perl/copyright drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/share/man/ drwxr-xr-x root/root 0 2015-12-03 23:24 ./usr/share/man/man3/ -rw-r--r-- root/root 3231 2015-12-03 23:24 ./usr/share/man/man3/PerlIO::gzip.3pm.gz +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Not removing build depends: as requested Keeping session: +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: s390x Build-Space: 764 Build-Time: 4 Distribution: xenial Host Architecture: s390x Install-Time: 11 Job: libperlio-gzip-perl_0.19-1.dsc Machine Architecture: s390x Package: libperlio-gzip-perl Package-Time: 15 Source-Version: 0.19-1 Space: 764 Status: successful Version: 0.19-1 -------------------------------------------------------------------------------- Finished at 20151203-2324 Build needed 00:00:15, 764k disc space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['scan-for-processes', 'PACKAGEBUILD-8377771'] Scanning for processes to kill in build /home/buildd/build-PACKAGEBUILD-8377771/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'PACKAGEBUILD-8377771'] Unmounting chroot for build PACKAGEBUILD-8377771... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'PACKAGEBUILD-8377771'] Removing build PACKAGEBUILD-8377771