RUN: /usr/share/launchpad-buildd/slavebin/slave-prep ['slave-prep'] Forking launchpad-buildd slave process... Kernel version: Linux magic 3.8.0-mustang_sw_1.07.04-Alpha #1 SMP Sat Sep 14 09:50:58 MDT 2013 aarch64 Buildd toolchain package versions: launchpad-buildd_119~APM.12.04.2 python-lpbuildd_119~APM.12.04.2. Syncing the system clock with the buildd NTP service... 19 Oct 09:26:03 ntpdate[22321]: adjust time server 10.211.37.1 offset -0.009236 sec RUN: /usr/share/launchpad-buildd/slavebin/unpack-chroot ['unpack-chroot', 'PACKAGEBUILD-5122546', '/home/buildd/filecache-default/dce386487a5f44370afebb182ff0656ba929e12f'] Unpacking chroot for build PACKAGEBUILD-5122546 RUN: /usr/share/launchpad-buildd/slavebin/mount-chroot ['mount-chroot', 'PACKAGEBUILD-5122546'] Mounting chroot for build PACKAGEBUILD-5122546 RUN: /usr/share/launchpad-buildd/slavebin/override-sources-list ['override-sources-list', 'PACKAGEBUILD-5122546', 'deb http://ftpmaster.internal/ubuntu trusty main universe'] Overriding sources.list in build-PACKAGEBUILD-5122546 RUN: /usr/share/launchpad-buildd/slavebin/update-debian-chroot ['update-debian-chroot', 'PACKAGEBUILD-5122546', 'arm64'] Updating debian chroot for build PACKAGEBUILD-5122546 Ign http://ftpmaster.internal trusty InRelease Ign http://archive-team.internal trusty InRelease Get:1 http://ftpmaster.internal trusty Release.gpg [933 B] Ign http://archive-team.internal trusty Release.gpg Get:2 http://ftpmaster.internal trusty Release [49.6 kB] Get:3 http://archive-team.internal trusty Release [730 B] Get:4 http://ftpmaster.internal trusty/main arm64 Packages [1143 kB] Get:5 http://archive-team.internal trusty/main arm64 Packages Ign http://archive-team.internal trusty/main Translation-en Get:6 http://ftpmaster.internal trusty/universe arm64 Packages [3568 kB] Get:7 http://ftpmaster.internal trusty/main Translation-en [711 kB] Get:8 http://ftpmaster.internal trusty/universe Translation-en [3885 kB] Fetched 9358 kB in 20s (467 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: libprocps0 libudev1 procps udev 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 1297 kB of archives. After this operation, 0 B of additional disk space will be used. WARNING: The following packages cannot be authenticated! libprocps0 udev libudev1 procps Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ trusty/main libprocps0 arm64 1:3.3.3-2ubuntu8 [31.4 kB] Get:2 http://ftpmaster.internal/ubuntu/ trusty/main udev arm64 204-0ubuntu19 [1014 kB] Get:3 http://ftpmaster.internal/ubuntu/ trusty/main libudev1 arm64 204-0ubuntu19 [30.9 kB] Get:4 http://ftpmaster.internal/ubuntu/ trusty/main procps arm64 1:3.3.3-2ubuntu8 [220 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1297 kB in 2s (484 kB/s) (Reading database ... 11933 files and directories currently installed.) Preparing to replace libprocps0:arm64 1:3.3.3-2ubuntu7 (using .../libprocps0_1%3a3.3.3-2ubuntu8_arm64.deb) ... Unpacking replacement libprocps0:arm64 ... Preparing to replace udev 204-0ubuntu18 (using .../udev_204-0ubuntu19_arm64.deb) ... Adding 'diversion of /bin/udevadm to /bin/udevadm.upgrade by fake-udev' Unpacking replacement udev ... Preparing to replace libudev1:arm64 204-0ubuntu18 (using .../libudev1_204-0ubuntu19_arm64.deb) ... Unpacking replacement libudev1:arm64 ... Preparing to replace procps 1:3.3.3-2ubuntu7 (using .../procps_1%3a3.3.3-2ubuntu8_arm64.deb) ... invoke-rc.d: policy-rc.d denied execution of stop. Unpacking replacement procps ... Setting up libprocps0:arm64 (1:3.3.3-2ubuntu8) ... Setting up libudev1:arm64 (204-0ubuntu19) ... Setting up udev (204-0ubuntu19) ... invoke-rc.d: policy-rc.d denied execution of restart. Removing 'diversion of /bin/udevadm to /bin/udevadm.upgrade by fake-udev' update-initramfs: deferring update (trigger activated) Setting up procps (1:3.3.3-2ubuntu8) ... invoke-rc.d: policy-rc.d denied execution of start. Processing triggers for libc-bin ... Processing triggers for initramfs-tools ... RUN: /usr/share/launchpad-buildd/slavebin/sbuild-package ['sbuild-package', 'PACKAGEBUILD-5122546', 'arm64', 'trusty', '--nolog', '--batch', '--archive=ubuntu', '--dist=trusty', '--purpose=PRIMARY', '--architecture=arm64', '--comp=universe', 'libpam-blue_0.9.0-3.dsc'] Initiating build PACKAGEBUILD-5122546 with 8 jobs across 8 processor cores. Kernel reported to sbuild: 3.8.0-mustang_sw_1.07.04-Alpha #1 SMP Sat Sep 14 09:50:58 MDT 2013 aarch64 Automatic build of libpam-blue_0.9.0-3 on magic by sbuild/arm64 1.170.5 Build started at 20131019-0926 ****************************************************************************** libpam-blue_0.9.0-3.dsc exists in cwd ** Using build dependencies supplied by package: Build-Depends: debhelper (>= 5), autotools-dev, automake, autoconf, libbluetooth-dev, libpam0g-dev, libtool Checking for already installed source dependencies... debhelper: missing autotools-dev: missing automake: missing autoconf: missing libbluetooth-dev: missing libpam0g-dev: missing libtool: missing Checking for source dependency conflicts... /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper autotools-dev automake autoconf libbluetooth-dev libpam0g-dev libtool Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: apparmor-easyprof bsdmainutils dh-apparmor dh-python file gettext gettext-base groff-base intltool-debian libasprintf-dev libasprintf0c2 libbluetooth3 libcroco3 libexpat1 libffi6 libgettextpo-dev libgettextpo0 libglib2.0-0 libmagic1 libpipeline1 libpython3-stdlib libpython3.3-minimal libpython3.3-stdlib libsigsegv2 libssl1.0.0 libunistring0 libxml2 m4 man-db mime-support po-debconf python3 python3-minimal python3.3 python3.3-minimal Suggested packages: autoconf2.13 autoconf-archive gnu-standards autoconf-doc wamerican wordlist whois vacation dh-make gettext-doc groff pkg-config libtool-doc automaken gfortran fortran95-compiler gcj less www-browser libmail-box-perl python3-doc python3-tk python3.3-doc binfmt-support Recommended packages: curl wget lynx-cur libglib2.0-data shared-mime-info libltdl-dev xml-core libmail-sendmail-perl The following NEW packages will be installed: apparmor-easyprof autoconf automake autotools-dev bsdmainutils debhelper dh-apparmor dh-python file gettext gettext-base groff-base intltool-debian libasprintf-dev libasprintf0c2 libbluetooth-dev libbluetooth3 libcroco3 libexpat1 libffi6 libgettextpo-dev libgettextpo0 libglib2.0-0 libmagic1 libpam0g-dev libpipeline1 libpython3-stdlib libpython3.3-minimal libpython3.3-stdlib libsigsegv2 libssl1.0.0 libtool libunistring0 libxml2 m4 man-db mime-support po-debconf python3 python3-minimal python3.3 python3.3-minimal 0 upgraded, 42 newly installed, 0 to remove and 0 not upgraded. Need to get 13.7 MB of archives. After this operation, 48.2 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libexpat1 libffi6 libmagic1 libssl1.0.0 libpython3.3-minimal mime-support libpython3.3-stdlib python3.3-minimal libasprintf0c2 libglib2.0-0 libpipeline1 libxml2 groff-base bsdmainutils man-db libbluetooth3 libcroco3 libunistring0 libgettextpo0 libsigsegv2 python3.3 python3-minimal libpython3-stdlib python3 dh-python file gettext-base m4 autoconf autotools-dev automake libasprintf-dev libgettextpo-dev gettext intltool-debian po-debconf apparmor-easyprof dh-apparmor debhelper libpam0g-dev libtool libbluetooth-dev Authentication warning overridden. Get:1 http://ftpmaster.internal/ubuntu/ trusty/main libexpat1 arm64 2.1.0-4 [114 kB] Get:2 http://ftpmaster.internal/ubuntu/ trusty/main libffi6 arm64 3.0.13-4 [19.0 kB] Get:3 http://ftpmaster.internal/ubuntu/ trusty/main libmagic1 arm64 5.11-2ubuntu4 [163 kB] Get:4 http://ftpmaster.internal/ubuntu/ trusty/main libssl1.0.0 arm64 1.0.1e-3ubuntu1 [860 kB] Get:5 http://ftpmaster.internal/ubuntu/ trusty/main libpython3.3-minimal arm64 3.3.2-7ubuntu3 [609 kB] Get:6 http://ftpmaster.internal/ubuntu/ trusty/main mime-support all 3.54ubuntu1 [31.7 kB] Get:7 http://ftpmaster.internal/ubuntu/ trusty/main libpython3.3-stdlib arm64 3.3.2-7ubuntu3 [2568 kB] Get:8 http://ftpmaster.internal/ubuntu/ trusty/main python3.3-minimal arm64 3.3.2-7ubuntu3 [1431 kB] Get:9 http://ftpmaster.internal/ubuntu/ trusty/main libasprintf0c2 arm64 0.18.1.1-10ubuntu3 [6816 B] Get:10 http://ftpmaster.internal/ubuntu/ trusty/main libglib2.0-0 arm64 2.38.0-1ubuntu1 [824 kB] Get:11 http://ftpmaster.internal/ubuntu/ trusty/main libpipeline1 arm64 1.2.4-1 [24.5 kB] Get:12 http://ftpmaster.internal/ubuntu/ trusty/main libxml2 arm64 2.9.1+dfsg1-3ubuntu2 [588 kB] Get:13 http://ftpmaster.internal/ubuntu/ trusty/main groff-base arm64 1.22.2-3 [688 kB] Get:14 http://ftpmaster.internal/ubuntu/ trusty/main bsdmainutils arm64 9.0.5ubuntu1 [199 kB] Get:15 http://ftpmaster.internal/ubuntu/ trusty/main man-db arm64 2.6.5-2 [678 kB] Get:16 http://ftpmaster.internal/ubuntu/ trusty/main libbluetooth3 arm64 4.101-0ubuntu8b1 [55.1 kB] Get:17 http://ftpmaster.internal/ubuntu/ trusty/main libcroco3 arm64 0.6.8-2 [64.9 kB] Get:18 http://ftpmaster.internal/ubuntu/ trusty/main libunistring0 arm64 0.9.3-5ubuntu1 [403 kB] Get:19 http://ftpmaster.internal/ubuntu/ trusty/main libgettextpo0 arm64 0.18.1.1-10ubuntu3 [106 kB] Get:20 http://ftpmaster.internal/ubuntu/ trusty/main libsigsegv2 arm64 2.10-2 [14.0 kB] Get:21 http://ftpmaster.internal/ubuntu/ trusty/main python3.3 arm64 3.3.2-7ubuntu3 [129 kB] Get:22 http://ftpmaster.internal/ubuntu/ trusty/main python3-minimal arm64 3.3.2-14ubuntu1 [26.4 kB] Get:23 http://ftpmaster.internal/ubuntu/ trusty/main libpython3-stdlib arm64 3.3.2-14ubuntu1 [8144 B] Get:24 http://ftpmaster.internal/ubuntu/ trusty/main python3 arm64 3.3.2-14ubuntu1 [9144 B] Get:25 http://ftpmaster.internal/ubuntu/ trusty/main dh-python all 1.20131003-1 [61.7 kB] Get:26 http://ftpmaster.internal/ubuntu/ trusty/main file arm64 5.11-2ubuntu4 [18.2 kB] Get:27 http://ftpmaster.internal/ubuntu/ trusty/main gettext-base arm64 0.18.1.1-10ubuntu3 [54.7 kB] Get:28 http://ftpmaster.internal/ubuntu/ trusty/main m4 arm64 1.4.16-5 [193 kB] Get:29 http://ftpmaster.internal/ubuntu/ trusty/main autoconf all 2.69-1.1 [573 kB] Get:30 http://ftpmaster.internal/ubuntu/ trusty/main autotools-dev all 20130810.1 [44.3 kB] Get:31 http://ftpmaster.internal/ubuntu/ trusty/main automake all 1:1.13.3-1.1ubuntu2 [573 kB] Get:32 http://ftpmaster.internal/ubuntu/ trusty/main libasprintf-dev arm64 0.18.1.1-10ubuntu3 [4586 B] Get:33 http://ftpmaster.internal/ubuntu/ trusty/main libgettextpo-dev arm64 0.18.1.1-10ubuntu3 [147 kB] Get:34 http://ftpmaster.internal/ubuntu/ trusty/main gettext arm64 0.18.1.1-10ubuntu3 [994 kB] Get:35 http://ftpmaster.internal/ubuntu/ trusty/main intltool-debian all 0.35.0+20060710.1 [31.6 kB] Get:36 http://ftpmaster.internal/ubuntu/ trusty/main po-debconf all 1.0.16+nmu2ubuntu1 [210 kB] Get:37 http://ftpmaster.internal/ubuntu/ trusty/main apparmor-easyprof all 2.8.0-0ubuntu31 [23.8 kB] Get:38 http://ftpmaster.internal/ubuntu/ trusty/main dh-apparmor all 2.8.0-0ubuntu31 [7720 B] Get:39 http://ftpmaster.internal/ubuntu/ trusty/main debhelper all 9.20130630ubuntu1 [629 kB] Get:40 http://ftpmaster.internal/ubuntu/ trusty/main libpam0g-dev arm64 1.1.3-8ubuntu3 [118 kB] Get:41 http://ftpmaster.internal/ubuntu/ trusty/main libtool arm64 2.4.2-1.3ubuntu1 [305 kB] Get:42 http://ftpmaster.internal/ubuntu/ trusty/main libbluetooth-dev arm64 4.101-0ubuntu8b1 [77.8 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 13.7 MB in 17s (799 kB/s) Selecting previously unselected package libexpat1:arm64. (Reading database ... 11933 files and directories currently installed.) Unpacking libexpat1:arm64 (from .../libexpat1_2.1.0-4_arm64.deb) ... Selecting previously unselected package libffi6:arm64. Unpacking libffi6:arm64 (from .../libffi6_3.0.13-4_arm64.deb) ... Selecting previously unselected package libmagic1:arm64. Unpacking libmagic1:arm64 (from .../libmagic1_5.11-2ubuntu4_arm64.deb) ... Selecting previously unselected package libssl1.0.0:arm64. Unpacking libssl1.0.0:arm64 (from .../libssl1.0.0_1.0.1e-3ubuntu1_arm64.deb) ... Selecting previously unselected package libpython3.3-minimal:arm64. Unpacking libpython3.3-minimal:arm64 (from .../libpython3.3-minimal_3.3.2-7ubuntu3_arm64.deb) ... Selecting previously unselected package mime-support. Unpacking mime-support (from .../mime-support_3.54ubuntu1_all.deb) ... Selecting previously unselected package libpython3.3-stdlib:arm64. Unpacking libpython3.3-stdlib:arm64 (from .../libpython3.3-stdlib_3.3.2-7ubuntu3_arm64.deb) ... Selecting previously unselected package python3.3-minimal. Unpacking python3.3-minimal (from .../python3.3-minimal_3.3.2-7ubuntu3_arm64.deb) ... Selecting previously unselected package libasprintf0c2:arm64. Unpacking libasprintf0c2:arm64 (from .../libasprintf0c2_0.18.1.1-10ubuntu3_arm64.deb) ... Selecting previously unselected package libglib2.0-0:arm64. Unpacking libglib2.0-0:arm64 (from .../libglib2.0-0_2.38.0-1ubuntu1_arm64.deb) ... Selecting previously unselected package libpipeline1:arm64. Unpacking libpipeline1:arm64 (from .../libpipeline1_1.2.4-1_arm64.deb) ... Selecting previously unselected package libxml2:arm64. Unpacking libxml2:arm64 (from .../libxml2_2.9.1+dfsg1-3ubuntu2_arm64.deb) ... Selecting previously unselected package groff-base. Unpacking groff-base (from .../groff-base_1.22.2-3_arm64.deb) ... Selecting previously unselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_9.0.5ubuntu1_arm64.deb) ... Selecting previously unselected package man-db. Unpacking man-db (from .../man-db_2.6.5-2_arm64.deb) ... Selecting previously unselected package libbluetooth3:arm64. Unpacking libbluetooth3:arm64 (from .../libbluetooth3_4.101-0ubuntu8b1_arm64.deb) ... Selecting previously unselected package libcroco3:arm64. Unpacking libcroco3:arm64 (from .../libcroco3_0.6.8-2_arm64.deb) ... Selecting previously unselected package libunistring0:arm64. Unpacking libunistring0:arm64 (from .../libunistring0_0.9.3-5ubuntu1_arm64.deb) ... Selecting previously unselected package libgettextpo0:arm64. Unpacking libgettextpo0:arm64 (from .../libgettextpo0_0.18.1.1-10ubuntu3_arm64.deb) ... Selecting previously unselected package libsigsegv2:arm64. Unpacking libsigsegv2:arm64 (from .../libsigsegv2_2.10-2_arm64.deb) ... Selecting previously unselected package python3.3. Unpacking python3.3 (from .../python3.3_3.3.2-7ubuntu3_arm64.deb) ... Selecting previously unselected package python3-minimal. Unpacking python3-minimal (from .../python3-minimal_3.3.2-14ubuntu1_arm64.deb) ... Selecting previously unselected package libpython3-stdlib:arm64. Unpacking libpython3-stdlib:arm64 (from .../libpython3-stdlib_3.3.2-14ubuntu1_arm64.deb) ... Selecting previously unselected package python3. Unpacking python3 (from .../python3_3.3.2-14ubuntu1_arm64.deb) ... Selecting previously unselected package dh-python. Unpacking dh-python (from .../dh-python_1.20131003-1_all.deb) ... Selecting previously unselected package file. Unpacking file (from .../file_5.11-2ubuntu4_arm64.deb) ... Selecting previously unselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.18.1.1-10ubuntu3_arm64.deb) ... Selecting previously unselected package m4. Unpacking m4 (from .../archives/m4_1.4.16-5_arm64.deb) ... Selecting previously unselected package autoconf. Unpacking autoconf (from .../autoconf_2.69-1.1_all.deb) ... Selecting previously unselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20130810.1_all.deb) ... Selecting previously unselected package automake. Unpacking automake (from .../automake_1%3a1.13.3-1.1ubuntu2_all.deb) ... Selecting previously unselected package libasprintf-dev:arm64. Unpacking libasprintf-dev:arm64 (from .../libasprintf-dev_0.18.1.1-10ubuntu3_arm64.deb) ... Selecting previously unselected package libgettextpo-dev:arm64. Unpacking libgettextpo-dev:arm64 (from .../libgettextpo-dev_0.18.1.1-10ubuntu3_arm64.deb) ... Selecting previously unselected package gettext. Unpacking gettext (from .../gettext_0.18.1.1-10ubuntu3_arm64.deb) ... Selecting previously unselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously unselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2ubuntu1_all.deb) ... Selecting previously unselected package apparmor-easyprof. Unpacking apparmor-easyprof (from .../apparmor-easyprof_2.8.0-0ubuntu31_all.deb) ... Selecting previously unselected package dh-apparmor. Unpacking dh-apparmor (from .../dh-apparmor_2.8.0-0ubuntu31_all.deb) ... Selecting previously unselected package debhelper. Unpacking debhelper (from .../debhelper_9.20130630ubuntu1_all.deb) ... Selecting previously unselected package libpam0g-dev:arm64. Unpacking libpam0g-dev:arm64 (from .../libpam0g-dev_1.1.3-8ubuntu3_arm64.deb) ... Selecting previously unselected package libtool. Unpacking libtool (from .../libtool_2.4.2-1.3ubuntu1_arm64.deb) ... Selecting previously unselected package libbluetooth-dev. Unpacking libbluetooth-dev (from .../libbluetooth-dev_4.101-0ubuntu8b1_arm64.deb) ... Setting up libexpat1:arm64 (2.1.0-4) ... Setting up libffi6:arm64 (3.0.13-4) ... Setting up libmagic1:arm64 (5.11-2ubuntu4) ... Setting up libssl1.0.0:arm64 (1.0.1e-3ubuntu1) ... Setting up libpython3.3-minimal:arm64 (3.3.2-7ubuntu3) ... Setting up mime-support (3.54ubuntu1) ... update-alternatives: using /usr/bin/see to provide /usr/bin/view (view) in auto mode Setting up libpython3.3-stdlib:arm64 (3.3.2-7ubuntu3) ... Setting up python3.3-minimal (3.3.2-7ubuntu3) ... Setting up libasprintf0c2:arm64 (0.18.1.1-10ubuntu3) ... Setting up libglib2.0-0:arm64 (2.38.0-1ubuntu1) ... No schema files found: doing nothing. Setting up libpipeline1:arm64 (1.2.4-1) ... Setting up libxml2:arm64 (2.9.1+dfsg1-3ubuntu2) ... Setting up groff-base (1.22.2-3) ... Setting up bsdmainutils (9.0.5ubuntu1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up man-db (2.6.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libbluetooth3:arm64 (4.101-0ubuntu8b1) ... Setting up libcroco3:arm64 (0.6.8-2) ... Setting up libunistring0:arm64 (0.9.3-5ubuntu1) ... Setting up libgettextpo0:arm64 (0.18.1.1-10ubuntu3) ... Setting up libsigsegv2:arm64 (2.10-2) ... Setting up python3.3 (3.3.2-7ubuntu3) ... Setting up python3-minimal (3.3.2-14ubuntu1) ... Setting up libpython3-stdlib:arm64 (3.3.2-14ubuntu1) ... Setting up file (5.11-2ubuntu4) ... Setting up gettext-base (0.18.1.1-10ubuntu3) ... Setting up m4 (1.4.16-5) ... Setting up autoconf (2.69-1.1) ... Setting up autotools-dev (20130810.1) ... Setting up automake (1:1.13.3-1.1ubuntu2) ... update-alternatives: using /usr/bin/automake-1.13 to provide /usr/bin/automake (automake) in auto mode Setting up libasprintf-dev:arm64 (0.18.1.1-10ubuntu3) ... Setting up libgettextpo-dev:arm64 (0.18.1.1-10ubuntu3) ... Setting up gettext (0.18.1.1-10ubuntu3) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16+nmu2ubuntu1) ... Setting up libpam0g-dev:arm64 (1.1.3-8ubuntu3) ... Setting up libtool (2.4.2-1.3ubuntu1) ... Setting up libbluetooth-dev (4.101-0ubuntu8b1) ... Setting up python3 (3.3.2-14ubuntu1) ... running python rtupdate hooks for python3.3... running python post-rtupdate hooks for python3.3... Setting up dh-python (1.20131003-1) ... Setting up apparmor-easyprof (2.8.0-0ubuntu31) ... Setting up dh-apparmor (2.8.0-0ubuntu31) ... Setting up debhelper (9.20130630ubuntu1) ... Processing triggers for libc-bin ... Checking correctness of source dependencies... Toolchain package versions: libc6-dev_2.17-93ubuntu4 make_3.81-8.2ubuntu3 dpkg-dev_1.16.12ubuntu1 gcc-4.8_4.8.1-10ubuntu8 g++-4.8_4.8.1-10ubuntu8 binutils_2.23.52.20130913-0ubuntu1 libstdc++-4.8-dev_4.8.1-10ubuntu8 libstdc++6_4.8.1-10ubuntu8 ------------------------------------------------------------------------------ dpkg-source: warning: -sn is not a valid option for Dpkg::Source::Package::V3::quilt gpgv: Signature made Mon May 31 15:13:30 2010 UTC using RSA key ID B495450A gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./libpam-blue_0.9.0-3.dsc dpkg-source: info: extracting libpam-blue in libpam-blue-0.9.0 dpkg-source: info: unpacking libpam-blue_0.9.0.orig.tar.gz dpkg-source: info: unpacking libpam-blue_0.9.0-3.debian.tar.gz dpkg-source: info: applying debian-changes-0.9.0-3 dpkg-buildpackage: source package libpam-blue dpkg-buildpackage: source version 0.9.0-3 dpkg-source --before-build libpam-blue-0.9.0 dpkg-buildpackage: host architecture arm64 /usr/bin/fakeroot debian/rules clean dh_testdir dh_testroot [ ! -f Makefile ] || /usr/bin/make distclean rm -f build-stamp rm -f configure aclocal.m4 config.guess install-sh ltmain.sh rm -f ylwrap dh_clean dpkg-buildpackage: warning: debian/rules must be updated to support the 'build-arch' and 'build-indep' targets (at least 'build-arch' seems to be missing) debian/rules build autoreconf -i aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' libtoolize: putting auxiliary files in `.'. libtoolize: copying file `./ltmain.sh' libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.in:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation configure.in:51: installing './config.guess' configure.in:17: installing './install-sh' automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in: installing './ylwrap' dh_testdir cp -f /usr/share/misc/config.sub config.sub cp -f /usr/share/misc/config.guess config.guess ./configure --prefix=/usr --mandir=\${prefix}/share/man checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes /build/buildd/libpam-blue-0.9.0/missing: Unknown `--is-lightweight' option Try `/build/buildd/libpam-blue-0.9.0/missing --help' for more information configure: WARNING: 'missing' script is too old or missing checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for bluetooth/bluetooth.h... yes checking for hci_open_dev in -lbluetooth... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 3458764513820540925 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for ANSI C header files... (cached) yes checking for unistd.h... (cached) yes checking for string.h... (cached) yes checking security/pam_modules.h usability... yes checking security/pam_modules.h presence... yes checking for security/pam_modules.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking io.h usability... no checking io.h presence... no checking for io.h... no checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for bzero... yes checking size of unsigned int... 4 checking size of unsigned long... 8 checking for int... yes checking for pid_t... yes checking for size_t... (cached) yes checking for flex... no checking for lex... no checking for bison... no checking for byacc... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating data/Makefile config.status: creating doc/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands dh_testdir /usr/bin/make make[1]: Entering directory `/build/buildd/libpam-blue-0.9.0' (CDPATH="${ZSH_VERSION+.}:" && cd . && autoheader) rm -f stamp-h1 touch config.h.in cd . && /bin/bash ./config.status config.h config.status: creating config.h config.status: config.h is unchanged /usr/bin/make all-recursive make[2]: Entering directory `/build/buildd/libpam-blue-0.9.0' Making all in src make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0/src' /usr/bin/make all-am make[4]: Entering directory `/build/buildd/libpam-blue-0.9.0/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c -o utils.lo utils.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c utils.c -fPIC -DPIC -o .libs/utils.o mv -f .deps/utils.Tpo .deps/utils.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT bluepmain.lo -MD -MP -MF .deps/bluepmain.Tpo -c -o bluepmain.lo bluepmain.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT bluepmain.lo -MD -MP -MF .deps/bluepmain.Tpo -c bluepmain.c -fPIC -DPIC -o .libs/bluepmain.o mv -f .deps/bluepmain.Tpo .deps/bluepmain.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT bluescan.lo -MD -MP -MF .deps/bluescan.Tpo -c -o bluescan.lo bluescan.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT bluescan.lo -MD -MP -MF .deps/bluescan.Tpo -c bluescan.c -fPIC -DPIC -o .libs/bluescan.o mv -f .deps/bluescan.Tpo .deps/bluescan.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT parser.lo -MD -MP -MF .deps/parser.Tpo -c -o parser.lo parser.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT parser.lo -MD -MP -MF .deps/parser.Tpo -c parser.c -fPIC -DPIC -o .libs/parser.o mv -f .deps/parser.Tpo .deps/parser.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT lexer.lo -MD -MP -MF .deps/lexer.Tpo -c -o lexer.lo lexer.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT lexer.lo -MD -MP -MF .deps/lexer.Tpo -c lexer.c -fPIC -DPIC -o .libs/lexer.o mv -f .deps/lexer.Tpo .deps/lexer.Plo /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -avoid-version -module -rpath='/lib/security' -lbluetooth -o pam_blue.la -rpath /usr/lib utils.lo bluepmain.lo bluescan.lo parser.lo lexer.lo -lbluetooth libtool: link: gcc -shared -fPIC -DPIC .libs/utils.o .libs/bluepmain.o .libs/bluescan.o .libs/parser.o .libs/lexer.o -lbluetooth -O2 -Wl,-soname -Wl,pam_blue.so -o .libs/pam_blue.so libtool: link: ( cd ".libs" && rm -f "pam_blue.la" && ln -s "../pam_blue.la" "pam_blue.la" ) make[4]: Leaving directory `/build/buildd/libpam-blue-0.9.0/src' make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0/src' Making all in data make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0/data' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0/data' Making all in doc make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0/doc' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0/doc' make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0' make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0' make[2]: Leaving directory `/build/buildd/libpam-blue-0.9.0' make[1]: Leaving directory `/build/buildd/libpam-blue-0.9.0' touch build-stamp /usr/bin/fakeroot debian/rules binary-arch dh_testdir dh_testroot dh_clean -k dh_clean: dh_clean -k is deprecated; use dh_prep instead dh_installdirs /usr/bin/make DESTDIR=/build/buildd/libpam-blue-0.9.0/debian/libpam-blue install make[1]: Entering directory `/build/buildd/libpam-blue-0.9.0' Making install in src make[2]: Entering directory `/build/buildd/libpam-blue-0.9.0/src' /usr/bin/make install-am make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0/src' make[4]: Entering directory `/build/buildd/libpam-blue-0.9.0/src' /bin/mkdir -p '/build/buildd/libpam-blue-0.9.0/debian/libpam-blue/usr/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c pam_blue.la '/build/buildd/libpam-blue-0.9.0/debian/libpam-blue/usr/lib' libtool: install: /usr/bin/install -c .libs/pam_blue.so /build/buildd/libpam-blue-0.9.0/debian/libpam-blue/usr/lib/pam_blue.so libtool: install: /usr/bin/install -c .libs/pam_blue.lai /build/buildd/libpam-blue-0.9.0/debian/libpam-blue/usr/lib/pam_blue.la libtool: install: warning: remember to run `libtool --finish /usr/lib' make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/build/buildd/libpam-blue-0.9.0/src' make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0/src' make[2]: Leaving directory `/build/buildd/libpam-blue-0.9.0/src' Making install in data make[2]: Entering directory `/build/buildd/libpam-blue-0.9.0/data' make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0/data' make[3]: Nothing to be done for `install-exec-am'. /bin/bash /build/buildd/libpam-blue-0.9.0/install-sh -d /build/buildd/libpam-blue-0.9.0/debian/libpam-blue/usr/etc/security /usr/bin/install -c -m600 ./sample.conf /build/buildd/libpam-blue-0.9.0/debian/libpam-blue//usr/etc/security/bluescan.conf make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0/data' make[2]: Leaving directory `/build/buildd/libpam-blue-0.9.0/data' Making install in doc make[2]: Entering directory `/build/buildd/libpam-blue-0.9.0/doc' make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0/doc' make[3]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/build/buildd/libpam-blue-0.9.0/debian/libpam-blue/usr/share/man/man7' /usr/bin/install -c -m 644 pam_blue.7 '/build/buildd/libpam-blue-0.9.0/debian/libpam-blue/usr/share/man/man7' make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0/doc' make[2]: Leaving directory `/build/buildd/libpam-blue-0.9.0/doc' make[2]: Entering directory `/build/buildd/libpam-blue-0.9.0' make[3]: Entering directory `/build/buildd/libpam-blue-0.9.0' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/build/buildd/libpam-blue-0.9.0' make[2]: Leaving directory `/build/buildd/libpam-blue-0.9.0' make[1]: Leaving directory `/build/buildd/libpam-blue-0.9.0' install -o root -g root -m 644 debian/bluesscan.conf /build/buildd/libpam-blue-0.9.0/debian/libpam-blue/etc/security/bluesscan.conf mv debian/libpam-blue/usr/lib/*.so debian/libpam-blue/lib/security rm -rf debian/libpam-blue/usr dh_testdir dh_testroot dh_installchangelogs ChangeLog dh_installdocs dh_installexamples dh_install dh_installman dh_compress dh_strip dh_strip debug symbol extraction: all non-arch-all packages for this build platform arm64: libpam-blue dh_strip debug symbol extraction: packages to act on: libpam-blue dh_strip debug symbol extraction: ignored packages: dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dpkg-deb: building package `libpam-blue-dbgsym' in `../libpam-blue-dbgsym_0.9.0-3_arm64.ddeb'. dh_fixperms dh_installdeb dh_shlibdeps dpkg-shlibdeps: warning: debian/libpam-blue/lib/security/pam_blue.so contains an unresolvable reference to symbol pam_get_item: it's probably a plugin dpkg-shlibdeps: warning: 2 other similar warnings have been skipped (use -v to see them all) dh_gencontrol dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe dh_md5sums dh_builddeb INFO: pkgstriptranslations version 118 pkgstriptranslations: processing libpam-blue (in debian/libpam-blue); do_strip: , oemstrip: pkgmaintainermangler: Maintainer field overridden to "Ubuntu Developers " pkgstripfiles: processing control file: debian/libpam-blue/DEBIAN/control, package libpam-blue, directory debian/libpam-blue .. removing usr/share/doc/libpam-blue/changelog.gz pkgstripfiles: PNG optimization for package libpam-blue took 0 s dpkg-deb: warning: 'debian/libpam-blue/DEBIAN/control' contains user-defined field 'Original-Maintainer' dpkg-deb: warning: ignoring 1 warning about the control file(s) dpkg-deb: building package `libpam-blue' in `../libpam-blue_0.9.0-3_arm64.deb'. dpkg-genchanges -B -mUbuntu Build Daemon >../libpam-blue_0.9.0-3_arm64.changes dpkg-genchanges: arch-specific upload - not including arch-independent packages dpkg-genchanges: binary-only upload - not including any source code dpkg-source --after-build libpam-blue-0.9.0 dpkg-buildpackage: binary only upload (no source included) ****************************************************************************** Build finished at 20131019-0927 Publishing debug debs. chroot-autobuild/build/buildd/libpam-blue_0.9.0-3_arm64.deb: new debian package, version 2.0. size 14824 bytes: control archive=975 bytes. 29 bytes, 1 lines conffiles 899 bytes, 19 lines control 418 bytes, 6 lines md5sums Package: libpam-blue Version: 0.9.0-3 Architecture: arm64 Maintainer: Ubuntu Developers Original-Maintainer: Ulises Vitulli Installed-Size: 71 Depends: libbluetooth3 (>= 4.91), libc6 (>= 2.17), bluez Section: admin Priority: extra Homepage: http://pam.0xdef.net/ Description: PAM module for local authenticaction with bluetooth devices pam_blue is a dynamically loadable binary object for the PAM security framework in Linux. It is presented as an extension for the common PAM modules, gives the user the ability for authenticate via a Bluetooth-compatible device like a cell phone or other bluetooth dongles (e.g. epox-presenter). Due to the fact that a whole part of the Bluetooth stack is implemented in hardware-side it is relatively difficult to change the Bluetooth hardware MAC address which makes this module more secure. chroot-autobuild/build/buildd/libpam-blue_0.9.0-3_arm64.deb: drwxr-xr-x root/root 0 2013-10-19 09:27 ./ drwxr-xr-x root/root 0 2013-10-19 09:27 ./usr/ drwxr-xr-x root/root 0 2013-10-19 09:27 ./usr/share/ drwxr-xr-x root/root 0 2013-10-19 09:27 ./usr/share/doc/ drwxr-xr-x root/root 0 2013-10-19 09:27 ./usr/share/doc/libpam-blue/ -rw-r--r-- root/root 427 2007-05-18 10:23 ./usr/share/doc/libpam-blue/NEWS.gz -rw-r--r-- root/root 395 2010-05-07 15:28 ./usr/share/doc/libpam-blue/README.Debian -rw-r--r-- root/root 805 2010-05-07 19:13 ./usr/share/doc/libpam-blue/changelog.Debian.gz -rw-r--r-- root/root 326 2007-05-18 10:23 ./usr/share/doc/libpam-blue/README -rw-r--r-- root/root 1254 2010-05-07 16:31 ./usr/share/doc/libpam-blue/copyright drwxr-xr-x root/root 0 2013-10-19 09:27 ./lib/ drwxr-xr-x root/root 0 2013-10-19 09:27 ./lib/security/ -rw-r--r-- root/root 26960 2013-10-19 09:27 ./lib/security/pam_blue.so drwxr-xr-x root/root 0 2013-10-19 09:27 ./etc/ drwxr-xr-x root/root 0 2013-10-19 09:27 ./etc/security/ -rw-r--r-- root/root 820 2013-10-19 09:27 ./etc/security/bluesscan.conf libpam-blue_0.9.0-3_arm64.changes: Format: 1.8 Date: Fri, 07 May 2010 13:18:08 -0300 Source: libpam-blue Binary: libpam-blue Architecture: arm64 Version: 0.9.0-3 Distribution: trusty Urgency: low Maintainer: Ubuntu Build Daemon Changed-By: Ulises Vitulli Description: libpam-blue - PAM module for local authenticaction with bluetooth devices Closes: 580313 Changes: libpam-blue (0.9.0-3) unstable; urgency=low . * New maintainer (Closes: #580313). * Bump Debian Policy up to 3.8.4 (no changes needed). * Stick to dpkg-source 3.0 (quilt) format. * Few minor package modifications: - Better handler of errors on cleaning targets. - Point to correct GPL-2 license file. - Switched to UTF8 copyright symbol. - Fix on watch file (Notice: upstream download page seems offline). Checksums-Sha1: 2cb5fa2538f7db38ab99611398ea900e8dff0056 14824 libpam-blue_0.9.0-3_arm64.deb Checksums-Sha256: 3623a82a826dee2f572c88f17f0112a8ca45fe53698f4147ed195113ba9e7512 14824 libpam-blue_0.9.0-3_arm64.deb Files: 75152dc0287361e0c25db3b4fbbdcc03 14824 admin extra libpam-blue_0.9.0-3_arm64.deb ****************************************************************************** Built successfully ****************************************************************************** Finished at 20131019-0927 Build needed 00:00:35, 3040k disk space RUN: /usr/share/launchpad-buildd/slavebin/scan-for-processes ['scan-for-processes', 'PACKAGEBUILD-5122546'] Scanning for processes to kill in build /home/buildd/build-PACKAGEBUILD-5122546/chroot-autobuild... RUN: /usr/share/launchpad-buildd/slavebin/umount-chroot ['umount-chroot', 'PACKAGEBUILD-5122546'] Unmounting chroot for build PACKAGEBUILD-5122546... RUN: /usr/share/launchpad-buildd/slavebin/remove-build ['remove-build', 'PACKAGEBUILD-5122546'] Removing build PACKAGEBUILD-5122546