Ubuntu
knetworkmanager package

scheda pcmcia e connessione gprs

Asked by diegodi

Ho una PCMCIA card GT Fusion che uso per connettermi sia in gprs che wifi.

Dal terminale se uso il comando lspci -vp la scheda risulta essere conosciuta ma se accedo alle impostazioni di rete dal menu sistema non è visualizzato tale hardware.

Come posso fare ad utilizzarla soprattutto per la connessione gprs?

Grazie!
Diego

Question information

Language:
Italian Edit question
Status:
Answered
For:
Ubuntu knetworkmanager Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:

This question was reopened

Revision history for this message
Massimo Forti (slackwarelife) said : 		#1

Hai provato a guardare questa guida:

http://wiki.ubuntu-it.org/ConnessioneUmtsGprsConSchedaPcmcia

Occhio che oggi il wiki italiano è molto lento.

Ciao

Revision history for this message
diegodi (diegodi) said : 		#2

Ti ringrazio.

Seguo la guida, riconosce la scheda, configuro come indicato, ma quando inserisco il comando pon
poi non succede nulla!

cosa o dove sbaglio?

Revision history for this message
diegodi (diegodi) said : 		#3

No, non ho risolto.

Revision history for this message
Massimo Forti (slackwarelife) said : 		#4

Ma hai provato ad aprire firefox e vedere se apre la pagina di google

Fammi sapere

Revision history for this message
diegodi (diegodi) said : 		#5

Si provato non funziona.

Cosa devo fare?

Revision history for this message
Massimo Forti (slackwarelife) said : 		#6

Ma della guida che ti ho postati prima cosa non ha funzionato esattamente ???

Grazie

Revision history for this message
diegodi (diegodi) said : 		#7

quando inserisco il comando pon non funziona nulla

Revision history for this message
Massimo Forti (slackwarelife) said : 		#8

Postami il messaggio che ti restituisce il seguente comando dopo che hai inserito la card:

sudo tail -f /var/log/messages

Ciao

Revision history for this message
diegodi (diegodi) said : 		#9

diegodi@Beta:~$ sudo tail -f /var/log/messages
Password:
Apr 24 14:38:11 Beta kernel: [ 48.324000] Bluetooth: L2CAP socket layer initialized
Apr 24 14:38:11 Beta kernel: [ 48.448000] Bluetooth: RFCOMM socket layer initialized
Apr 24 14:38:11 Beta kernel: [ 48.448000] Bluetooth: RFCOMM TTY layer initialized
Apr 24 14:38:11 Beta kernel: [ 48.448000] Bluetooth: RFCOMM ver 1.8
Apr 24 14:39:14 Beta dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Apr 24 14:39:14 Beta kernel: [ 111.388000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Apr 24 14:39:18 Beta dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.host_name
Apr 24 14:39:18 Beta dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.domain_name
Apr 24 14:39:18 Beta dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_domain
Apr 24 14:39:18 Beta dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_servers

Revision history for this message
diegodi (diegodi) said : 		#10

egodi@Beta:~$ lsmod
Module Size Used by
rfcomm 40856 0
l2cap 25728 5 rfcomm
bluetooth 55908 4 rfcomm,l2cap
radeon 124576 2
drm 81044 3 radeon
ppdev 10116 0
speedstep_ich 6288 0
speedstep_lib 6148 1 speedstep_ich
cpufreq_userspace 5408 0
cpufreq_stats 7360 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9228 1
freq_table 5792 3 speedstep_ich,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 8200 0
tc1100_wmi 8068 0
pcc_acpi 13184 0
dev_acpi 12292 0
sony_acpi 6284 0
video 16388 0
sbs 15652 0
i2c_ec 5888 1 sbs
i2c_core 22784 1 i2c_ec
dock 10268 0
button 8720 0
battery 10756 0
container 5248 0
ac 6020 0
asus_acpi 17308 0
backlight 7040 1 asus_acpi
ipv6 268704 8
nls_iso8859_1 5120 1
nls_cp437 6784 1
vfat 14208 1
fat 53916 1 vfat
nls_utf8 3072 1
ntfs 107764 1
option 9216 0
usbserial 32488 1 option
sbp2 23812 0
parport_pc 36388 0
lp 12452 0
parport 36936 3 ppdev,parport_pc,lp
ohci_hcd 22532 0
joydev 10816 0
pcmcia 39212 0
snd_intel8x0 34204 2
snd_ac97_codec 98336 1 snd_intel8x0
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_pcm 79876 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
ipw2200 148040 0
ieee80211 34760 1 ipw2200
ieee80211_crypt 7040 1 ieee80211
snd_seq_midi 9600 0
snd_rawmidi 25472 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 23684 2 snd_pcm,snd_seq
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
yenta_socket 27532 2
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 40852 3 pcmcia,yenta_socket,rsrc_nonstatic
iTCO_wdt 11812 0
iTCO_vendor_support 4868 1 iTCO_wdt
pcspkr 4224 0
snd 54020 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8672 1 snd
psmouse 38920 0
serio_raw 7940 0
intel_agp 25116 1
snd_page_alloc 10888 2 snd_intel8x0,snd_pcm
agpgart 35400 2 drm,intel_agp
shpchp 34324 0
pci_hotplug 32576 1 shpchp
af_packet 23816 8
tsdev 8768 0
evdev 11008 4
ext3 133128 1
jbd 59816 1 ext3
mbcache 9604 1 ext3
sg 36252 0
sd_mod 23428 5
sr_mod 17060 0
cdrom 37664 1 sr_mod
ata_piix 15492 4
ata_generic 9092 0
libata 125720 2 ata_piix,ata_generic
scsi_mod 142348 5 sbp2,sg,sd_mod,sr_mod,libata
ehci_hcd 34188 0
ohci1394 36528 0
ieee1394 299448 2 sbp2,ohci1394
b44 28044 0
mii 6528 1 b44
generic 5124 0 [permanent]
uhci_hcd 25360 0
usbcore 134280 6 option,usbserial,ohci_hcd,ehci_hcd,uhci_hcd
thermal 14856 0
processor 31048 1 thermal
fan 5636 0
fbcon 42656 0
tileblit 3584 1 fbcon
font 9216 1 fbcon
bitblit 6912 1 fbcon
softcursor 3200 1 bitblit
vesafb 9220 0
capability 5896 0
commoncap 8192 1 capability
diegodi@Beta:~$

Revision history for this message
diegodi (diegodi) said : 		#11

diegodi@Beta:~$ sudo tail -f /var/log/messages
Password:
Apr 24 14:45:28 Beta kernel: [ 487.064000] usb 5-1: new full speed USB device using ohci_hcd and address 2
Apr 24 14:45:28 Beta kernel: [ 487.280000] usb 5-1: configuration #1 chosen from 1 choice
Apr 24 14:45:28 Beta kernel: [ 487.284000] option 5-1:1.0: GSM modem (1-port) converter detected
Apr 24 14:45:28 Beta kernel: [ 487.284000] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0
Apr 24 14:45:28 Beta kernel: [ 487.284000] option 5-1:1.1: GSM modem (1-port) converter detected
Apr 24 14:45:28 Beta kernel: [ 487.288000] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1
Apr 24 14:45:28 Beta kernel: [ 487.288000] option 5-1:1.2: GSM modem (1-port) converter detected
Apr 24 14:45:28 Beta kernel: [ 487.288000] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB2
Apr 24 14:45:28 Beta kernel: [ 487.292000] option 5-1:1.3: GSM modem (1-port) converter detected
Apr 24 14:45:28 Beta kernel: [ 487.292000] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB3

Revision history for this message
Massimo Forti (slackwarelife) said : 		#12

Adesso postami:

sudo cat /proc/bus/usb/devices

Grazie

Revision history for this message
diegodi (diegodi) said : 		#13

egodi@Beta:~$ sudo cat /proc/bus/usb/devices
Password:

T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:03:00.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0af0 ProdID=6000 Rev= 0.00
S: Manufacturer=Option N.V.
S: Product=Fusion UMTS GPRS WLAN
S: SerialNumber=Serial Number
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(

Revision history for this message
diegodi (diegodi) said : 		#14

diegodi@Beta:~$ sudo cat /proc/bus/usb/devices

T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:03:00.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0af0 ProdID=6000 Rev= 0.00
S: Manufacturer=Option N.V.
S: Product=Fusion UMTS GPRS WLAN
S: SerialNumber=Serial Number
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

Revision history for this message
Massimo Forti (slackwarelife) said : 		#15

Se tu fai così cosa ottieni ???

sudo modprobe serial_cs

sudo modprobe usbserial vendor=0x0af0 product=0x6000

Revision history for this message
diegodi (diegodi) said : 		#16

ore te lo scrivo pazienta un attimo

Revision history for this message
diegodi (diegodi) said : 		#17

non ottengo niente

Revision history for this message
diegodi (diegodi) said : 		#18

non ottengo niente

Revision history for this message
diegodi (diegodi) said : 		#19

diegodi@Beta:~$ sudo modprobe serial_cs
Password:
diegodi@Beta:~$ sudo modprobe usbserial vendor=0x0af0 product=0x6000
diegodi@Beta:~$

Revision history for this message
Massimo Forti (slackwarelife) said : 		#20

Riprova a fare la connessione con la procedura che stavi seguendo, voglio vedere cosa ti restituisce.

Ciao e grazie

Revision history for this message
diegodi (diegodi) said : 		#21

sempre niente

Revision history for this message
Massimo Forti (slackwarelife) said : 		#22

Proviamo così:

PPP
Questa configurazione è operativa su una 2.6.11.10 con udev (http://www.gentoo.org/doc/en/udev-guide.xml).
Per i singoli valori dei parametri di configurazione fare riferimento alla parte iniziale di questo documento.

I files di configurazione necessari sono:

File: /etc/ppp/chat-UMTS
 # /etc/ppp/chat-UMTS:
  'ABORT' 'BUSY'
  'ABORT' 'ERROR'
  'ABORT' 'NO ANSWER'
  'ABORT' 'NO CARRIER'
  'ABORT' 'NO DIALTONE'
  'ABORT' 'Invalid Login'
  'ABORT' 'Login incorrect'
  '' 'ATZ'
  'OK' 'ATH'
  'OK' 'ATE1'
  'OK' 'AT+CGDCONT=1,"IP","web.omnitel.it","",0,0'
  'OK' 'at_opsys=3,2'
  'OK' 'ATDT*99***1#'
  'CONNECT' ''
  'TIMEOUT' '30'
  '~--' ''

e

File: /etc/ppp/peers/UMTS
 # /etc/ppp/peers/UMTS:
 debug
 /dev/modem2
 460800
 noauth
 novj
 crtscts
 usepeerdns
 local
 defaultroute
 noipdefault
 connect '/usr/sbin/chat -f /etc/ppp/chat-UMTS'
 remotename UMTS

Secondo la mia esperienza, se non configurate nell'autoload il caricamento del modulo
(come precedentemente suggerito) potreste avere problemi con la creazione dei device USBx
se caricate il modulo dopo aver inserito la scheda.

Code: dopo aver inserito la scheda:
 ls -la /dev/tts

per controllare che siano stati creati i device

Code: se tutto ok:
 ln -sf /dev/tts/USB0 /dev/modem2

Code: attivare la connessione:
 pon UMTS

Code: disattivare la connessione:
 poff UMTS

Sinceramente non capisco, riesci a fare tutto, ma non va.

Ciao

Revision history for this message
diegodi (diegodi) said : 		#23

Questi comandi non mi vanno mi puoi guidare passo per passo?

Revision history for this message
diegodi (diegodi) said : 		#24

magari sbaglio qualcosa nella configurazione...mi guidi passo per passo?

Revision history for this message
Massimo Forti (slackwarelife) said : 		#25

Sto anch'io cercando di capire, in effetti prima abbiamo fatto tutti i passi descritti nelle varie guide che ho trovato, ma nulla, sembra che ci sia qualche altro parametro che ci sfugge.
Tu hai creato i due file di cui sopra inserendo i tuoi dati come richiesti dal tuo operatore.

Revision history for this message
diegodi (diegodi) said : 		#26

si tutto

Revision history for this message
Massimo Forti (slackwarelife) said : 		#27

Benissimo, con i files configurati proviamo:

sudo ls -la /dev/tts

sudo ln -sf /dev/tts/USB0 /dev/modem2

sudo pon UMTS

E vediamo cosa succede.

Ciao

Revision history for this message
diegodi (diegodi) said : 		#28

Allora:

ho configurato come indicato in questa guida e creato la connessione "WIND" come indicato nella guida.

http://wiki.ubuntu-it.org/ConnessioneUmtsGprsConSchedaPcmcia

lancio il comando pon WIND e non succede nulla.

ora cosa devo fare?

Revision history for this message
Massimo Forti (slackwarelife) said : 		#29

Prova a vedere i file di log, tipo /var/log/message, oppure /var/log/syslog. Probabilmente qualcosa succede, ma non davanti a te, ma nel sistema. Per visualizzare il tutto gedit e la path prima specificata.
Vorrei xerò capire se il dispositivo ti viene generato, cioè se apri nautilus e vai nella dir /dev vedi il dispositivo ttyUSBx (x = 0,1,2,..,n)

Grazie e scusa il ritardo.

Revision history for this message
diegodi (diegodi) said : 		#30

grazie a te!
domani sera provo e posto!
dove trovo nautilus?

devi sempre mettere sudo innanzi?
scusa ma sono nuovo di kubuntu

Revision history for this message
Massimo Forti (slackwarelife) said : 		#31

No scusa se usi Kubuntu devi utilizzare knoqueror. Pensavo usassi Ubuntu (nautilus è il braowser di Gnome).

Scusa ancora ed a presto.

Revision history for this message
diegodi (diegodi) said : 		#32

scusa hai una email? non riesco a postare il syslog

Revision history for this message
Massimo Forti (slackwarelife) said : 		#33

Scusami il ritardo, non mi serve tutto il syslog, ma solo quello che avviene dopo aver inserito la scheda e tentato di avviarla, per fare questo puoi semplicemente inserire il dispositivo avviarlo e poi anadre nel syslog e copiare le ultime righe (10/15).
Grazie a presto

Revision history for this message
diegodi (diegodi) said : 		#34

Apr 26 18:47:18 Beta dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Apr 26 18:47:26 Beta dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
Apr 26 18:47:43 Beta dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
Apr 26 18:47:49 Beta dhclient: No DHCPOFFERS received.
Apr 26 18:47:49 Beta dhclient: No working leases in persistent database - sleeping.
Apr 26 18:48:06 Beta kernel: [ 342.568000] PPP generic driver version 2.4.2
Apr 26 18:48:06 Beta pppd[6346]: pppd 2.4.4 started by diegodi, uid 1000
Apr 26 18:48:07 Beta chat[6349]: abort on (BUSY)
Apr 26 18:48:07 Beta chat[6349]: abort on (NO CARRIER)
Apr 26 18:48:07 Beta chat[6349]: abort on (VOICE)
Apr 26 18:48:07 Beta chat[6349]: abort on (NO DIALTONE)
Apr 26 18:48:07 Beta chat[6349]: abort on (NO DIAL TONE)
Apr 26 18:48:07 Beta chat[6349]: abort on (NO ANSWER)
Apr 26 18:48:07 Beta chat[6349]: abort on (DELAYED)
Apr 26 18:48:07 Beta chat[6349]: send (ATZ^M)
Apr 26 18:48:07 Beta chat[6349]: expect (OK)
Apr 26 18:48:07 Beta chat[6349]: ATZ^M^M
Apr 26 18:48:07 Beta chat[6349]: OK
Apr 26 18:48:07 Beta chat[6349]: -- got it
Apr 26 18:48:07 Beta chat[6349]: send (ATDT*99***1#^M)
Apr 26 18:48:08 Beta chat[6349]: expect (CONNECT)
Apr 26 18:48:08 Beta chat[6349]: ^M
Apr 26 18:48:08 Beta chat[6349]: ATDT*99***1#^M^M
Apr 26 18:48:08 Beta chat[6349]: CONNECT
Apr 26 18:48:08 Beta chat[6349]: -- got it
Apr 26 18:48:08 Beta chat[6349]: send (\d)
Apr 26 18:48:09 Beta pppd[6346]: Serial connection established.
Apr 26 18:48:09 Beta pppd[6346]: using channel 1
Apr 26 18:48:09 Beta pppd[6346]: Using interface ppp0
Apr 26 18:48:09 Beta pppd[6346]: Connect: ppp0 <--> /dev/ttyUSB0
Apr 26 18:48:10 Beta pppd[6346]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x405cf436> <pcomp> <accomp>]
Apr 26 18:48:10 Beta pppd[6346]: rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <auth chap MD5> <magic 0x804e16b> <pcomp> <accomp>]
Apr 26 18:48:10 Beta pppd[6346]: sent [LCP ConfNak id=0x0 <auth pap>]
Apr 26 18:48:10 Beta pppd[6346]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x405cf436> <pcomp> <accomp>]
Apr 26 18:48:10 Beta pppd[6346]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x804e16b> <pcomp> <accomp>]
Apr 26 18:48:10 Beta pppd[6346]: sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth pap> <magic 0x804e16b> <pcomp> <accomp>]
Apr 26 18:48:10 Beta pppd[6346]: sent [LCP EchoReq id=0x0 magic=0x405cf436]
Apr 26 18:48:10 Beta pppd[6346]: sent [PAP AuthReq id=0x1 user="8939880385002121203" password=<hidden>]
Apr 26 18:48:10 Beta pppd[6346]: rcvd [LCP DiscReq id=0x2 magic=0x804e16b]
Apr 26 18:48:10 Beta pppd[6346]: rcvd [LCP EchoRep id=0x0 magic=0x804e16b 40 5c f4 36]
Apr 26 18:48:10 Beta pppd[6346]: rcvd [PAP AuthAck id=0x1 ""]
Apr 26 18:48:10 Beta pppd[6346]: PAP authentication succeeded
Apr 26 18:48:10 Beta pppd[6346]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Apr 26 18:48:10 Beta pppd[6346]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Apr 26 18:48:10 Beta pppd[6346]: rcvd [LCP ProtRej id=0x3 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Apr 26 18:48:10 Beta pppd[6346]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
Apr 26 18:48:10 Beta kernel: [ 346.296000] PPP BSD Compression module registered
Apr 26 18:48:10 Beta pppd[6346]: Hangup (SIGHUP)
Apr 26 18:48:10 Beta pppd[6346]: Modem hangup
Apr 26 18:48:10 Beta pppd[6346]: Connection terminated.
Apr 26 18:48:10 Beta kernel: [ 346.392000] PPP Deflate Compression module registered
Apr 26 18:48:11 Beta pppd[6346]: Exit.

Revision history for this message
Massimo Forti (slackwarelife) said : 		#35

Innanzitutto accertati che in `/etc/ppp/options' sia presente o decommentata la riga `noauth'.

Configurare il nr. di telefono su `*99#' ;
configurare la velocita' su `460800' ;
eliminare la stringa di inizializzazione `AT+CGDCONT=1,"IP","web.omnitel.it";' ;
configurare "User" immettendo uno spazio vuoto o almeno 1 carattere a piacere;
configurare "Password" immettendo uno spazio vuoto o almeno 1 carattere a piacere.
questo dovrebbe essere sufficiente.

ciao

Revision history for this message
diegodi (diegodi) said : 		#36

scusa ma come devo fare? mi aiuti passo per passo?

Revision history for this message
Massimo Forti (slackwarelife) said : 		#37

scusa il ritardo, i dati come devono essere:

File: /etc/ppp/chat-UMTS
 # /etc/ppp/chat-UMTS:
  'ABORT' 'BUSY'
  'ABORT' 'ERROR'
  'ABORT' 'NO ANSWER'
  'ABORT' 'NO CARRIER'
  'ABORT' 'NO DIALTONE'
  'ABORT' 'Invalid Login'
  'ABORT' 'Login incorrect'
  '' 'ATZ'
  'OK' 'ATH'
  'OK' 'ATE1'
  #'OK' 'AT+CGDCONT=1,"IP","web.omnitel.it","",0,0'
  'OK' 'at_opsys=3,2'
  'OK' 'ATDT*99#'
  'CONNECT' ''
  'TIMEOUT' '30'
  '~--' ''

File: /etc/ppp/peers/UMTS
 # /etc/ppp/peers/UMTS:
 debug
 /dev/ttyUSB0
 460800
 noauth
 novj
 crtscts
 usepeerdns
 local
 defaultroute
 noipdefault
 connect '/usr/sbin/chat -f /etc/ppp/chat-UMTS'
 remotename UMTS

I due file devono essere così, ciao

Revision history for this message
diegodi (diegodi) said : 		#38

Ho capito.

Ma come li faccio diventare così? guidami passo per passo sono un novizio

Revision history for this message
Massimo Forti (slackwarelife) said : 		#39

Ciao, scusami. Per fare quello che ti ho detto, apri un terminale e digiti:

$: sudo gedit /etc/ppp/chat-UMTS

questo comando aprirà il file chat-UMTS, poi lo modifichi come da me descritto prima. Poi fai la stessa cosa anche con l'altro file:

$: sudo gedit /etc/ppp/peers/UMTS

e modifichi come da me descritto. Salvi e riavvia il tutto. Poi prova a conneterti. Ciao e grazie

Can you help with this problem?

Provide an answer of your own, or ask diegodi for more information if necessary.

To post a message you must log in.