Luego de instalar HPLIP 3.30.6 en ubuntu 1804 la impresora no imprime, la pantalla solo muestra el mensaje "imprimiendo documento". El registro hp-check arroja "no errors or warnings". Al ejecutar hp-doctor, lo unico que muestra de raro al final es: Checking for HP Properitery Plugin's.... No plug-in printers are configured. ++++++++++++++++++++++++++++++++++++ Este es el registro de hp-check: hernan@hernan:~$ hp-check Saving output in log file: /home/hernan/hp-check.log HP Linux Imaging and Printing System (ver. 3.20.6) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version |Gtk-Message: 14:56:47.481: Failed to load module "canberra-gtk-module" /Gtk-Message: 14:56:47.511: Failed to load module "canberra-gtk-module" --------------- | SYSTEM INFO | --------------- Kernel: 4.15.0-109-generic #110-Ubuntu SMP Tue Jun 23 02:39:32 UTC 2020 GNU/Linux Host: hernan Proc: 4.15.0-109-generic #110-Ubuntu SMP Tue Jun 23 02:39:32 UTC 2020 GNU/Linux Distribution: 12 18.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.20.6 HPLIP-Home: /usr/share/hplip HPLIP-Installation: Auto installation is supported for ubuntu distro 18.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.6 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP ppdbase=/usr/share/ppd doc=/usr/share/doc/hplip-3.20.6 html=/usr/share/doc/hplip-3.20.6 icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv/hp bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=no foomatic-drv-install=no foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.6 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes qt5=no policy-kit=no lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=yes class-driver=no Current contents of '/var/lib/hp/hplip.state' file: [plugin] installed = 1 eula = 1 version = 3.17.10 Current contents of '~/.hplip/hplip.conf' file: [upgrade] notify_upgrade = true last_upgraded_time = 1594402979 pending_upgrade_time = 0 latest_available_version = 3.17.10 [installation] date_time = 17/07/20 14:56:48 version = 3.20.6 [settings] systray_visible = 0 systray_messages = 0 [last_used] device_uri = "hp:/usb/HP_LaserJet_Pro_MFP_M127fn?serial=CNB9H23HX9" printer_name = HP_LaserJet_Pro_MFP_M127fn working_dir = . [commands] scan = /usr/bin/xsane -V %SANE_URI% [refresh] rate = 30 enable = false type = 1 [polling] enable = false interval = 5 device_list = [fax] voice_phone = email_address =

-------------- | COMPILEDEP | -------------- gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.5.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK - libtool libtool - Library building support services REQUIRED - 2.4.6 OK - ------------------------ | General Dependencies | ------------------------ libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK - python-xml Python XML libraries REQUIRED - 2.2.5 OK - libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK - sane-devel SANE - Scanning library development files REQUIRED - - OK - pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 5.1.0 OK - pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.12.1 OK - libpthread libpthread - POSIX threads library REQUIRED - 2.27 OK - python-devel Python devel - Python development files REQUIRED 2.2 2.7.17 OK - cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK - python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK - cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK - reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK - pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.12.1 OK - libusb libusb - USB library REQUIRED - 1.0 OK - cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK - python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.17 OK - python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - libjpeg libjpeg - JPEG library REQUIRED - - OK - sane SANE - Scanning library REQUIRED - - OK - ---------------------- | Scan Configuration | ---------------------- scanext Scan-SANE-Extension REQUIRED - 3.20.6 OK - hpaio HPLIP-SANE-Backend REQUIRED - 3.20.6 OK 'hpaio found in /etc/sane.d/dll.conf' ------------------------- | External Dependencies | ------------------------- gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK - cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK 'CUPS Scheduler is running' network network -wget OPTIONAL - 1.19.4 OK - policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - Gtk-Message: 14:56:52.051: Failed to load module "canberra-gtk-module" Gtk-Message: 14:56:52.081: Failed to load module "canberra-gtk-module" xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - dbus DBus - Message bus system REQUIRED - 1.12.2 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - --------------------- | Python Extentions | --------------------- hpmudext IO-Extension REQUIRED - 3.20.6 OK - cupsext CUPS-Extension REQUIRED - 3.20.6 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/HP_LaserJet_Pro_MFP_M127fn?serial=CNB9H23HX9' is a Hewlett-Packard HP_LaserJet_Pro_MFP_M127fn all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model -------------------------------- -------------------------- hp:/usb/HP_LaserJet_Pro_MFP_M127 HP LaserJet Pro MFP M127fn fn?serial=CNB9H23HX9 --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP_LaserJet_Pro_MFP_M127fn -------------------------- Type: Printer Device URI: hp:/usb/HP_LaserJet_Pro_MFP_M127fn?serial=CNB9H23HX9 PPD: /etc/cups/ppd/HP_LaserJet_Pro_MFP_M127fn.ppd PPD Description: HP LaserJet Pro MFP m127fn, hpcups 3.20.6 Printer status: la impresora HP_LaserJet_Pro_MFP_M127fn está ahora imprimiendo HP_LaserJProcessing page 1.... activada desde vie 17 jul 2020 14:56:05 -05 Communication status: Good -------------- | PERMISSION | -------------- USB HP_LaserJet_Pro_MFP_M127fn Required - - OK Node:'/dev/bus/usb/001/009' Perm:' root lp rw- rw- rw- rw- r--' No errors or warnings. Done. hernan@hernan:~$ +++++++++++++++++++++++++++++++++++++ Y este el el registro de hp-doctor: hernan@hernan:~$ hp-doctor HP Linux Imaging and Printing System (ver. 3.20.6) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. HP Linux Imaging and Printing System (ver. 3.20.6) Self Diagnse Utility and Healing Utility ver. 1.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. |Gtk-Message: 14:59:43.072: Failed to load module "canberra-gtk-module" /Gtk-Message: 14:59:43.110: Failed to load module "canberra-gtk-module" Checking for Deprecated items.... No Deprecated items are found Checking for HPLIP updates.... HP Linux Imaging and Printing System (ver. 3.20.6) HPLIP upgrade latest version ver. 1.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Latest version of HPLIP is already installed. Checking for Dependencies.... --------------- | SYSTEM INFO | --------------- Kernel: 4.15.0-109-generic #110-Ubuntu SMP Tue Jun 23 02:39:32 UTC 2020 GNU/Linux Host: hernan Proc: 4.15.0-109-generic #110-Ubuntu SMP Tue Jun 23 02:39:32 UTC 2020 GNU/Linux Distribution: 12 18.04 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.20.6 HPLIP-Home: /usr/share/hplip HPLIP-Installation: Auto installation is supported for ubuntu distro 18.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.6 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP ppdbase=/usr/share/ppd doc=/usr/share/doc/hplip-3.20.6 html=/usr/share/doc/hplip-3.20.6 icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv/hp bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=no foomatic-drv-install=no foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.6 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes qt5=no policy-kit=no lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=yes class-driver=no Current contents of '/var/lib/hp/hplip.state' file: [plugin] installed = 1 eula = 1 version = 3.17.10 Current contents of '~/.hplip/hplip.conf' file: [upgrade] notify_upgrade = true last_upgraded_time = 1594402979 pending_upgrade_time = 0 latest_available_version = 3.17.10 [installation] date_time = 17/07/20 14:59:44 version = 3.20.6 [settings] systray_visible = 0 systray_messages = 0 [last_used] device_uri = "hp:/usb/HP_LaserJet_Pro_MFP_M127fn?serial=CNB9H23HX9" printer_name = HP_LaserJet_Pro_MFP_M127fn working_dir = . [commands] scan = /usr/bin/xsane -V %SANE_URI% [refresh] rate = 30 enable = false type = 1 [polling] enable = false interval = 5 device_list = [fax] voice_phone = email_address =

Ubuntuhplip package

History of question #691929

Ubuntu
hplip package