HP LaserJet 1000 not working after upgrading to Ubuntu 15.04 -> using hplip drivers
This is a problem I have had before. Refer question 238859 from 2013. Last week I upgraded Ubuntu to version 15.4, also upgraded HPLIP to version 3.15.4. The printer (HP LaserJet 1000) worked for one day then stopped. hp-check responds 'no errors or warnings.' I ran the commands you gave me back in 2013 as I assumed you would ask me to repeat this exercise. For some reason I am unable to paste in output from these commands here. I have tried CTRL V, CTRL SHIFT V and SHIFT INSERT to paste in the output, but can't get it to work. I have saved the output in a LibreOffice Writer file. Your advice please!
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- Ubuntu hplip Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Please run these instructions:
In the instructions, replace the command
./getweb 1020 # Get HP LaserJet 1020 firmware file
with the following command:
./getweb 1000 # Get HP LaserJet 1000 firmware file
That should get your HP Laserjet 1000 working...
The HPLIP drivers are buggy...
|
Revision history for this message
|
#2 |
I entered the first half of the commands but then ran into error messages which I reproduce below:
barry@barry-
rm: cannot remove 'foo*': No such file or directory.
barry@barry-
make: *** No targets specified and no makefile found. stop.
barry@barry-
bash: ./getweb: No such file or directory.
barry@barry-
make: ***No rule to make target 'install'. Stop.
|
Revision history for this message
|
#3 |
Please send the output from ALL the commands, not only the second half.
Thanks.
|
Revision history for this message
|
#4 |
Hi Mark,
Somewhat mysteriously, the printer is now working. I copy hereunder the
output in case you spy something untoward.
barry@
[sudo] password for barry:
Ign http://
Ign http://
Ign http://
Hit http://
Get:1 http://
Hit http://
Hit http://
Get:2 http://
Hit http://
Ign http://
Ign http://
Get:3 http://
Ign http://
Ign http://
Ign http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Ign http://
Get:8 http://
Hit http://
Get:9 http://
[33.7 kB]
Get:10 http://
Packages [28 B]
Ign http://
Get:11 http://
Packages [12.7 kB]
Get:12 http://
Packages [28 B]
Get:13 http://
[33.3 kB]
Get:14 http://
Packages [28 B]
Hit http://
Get:15 http://
[12.8 kB]
Hit http://
Get:16 http://
Packages [28 B]
Get:17 http://
[17.1 kB]
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:18 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:19 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:20 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Get:26 http://
Get:27 http://
Get:28 http://
[26.3 kB]
Get:29 http://
Packages [28 B]
Get:30 http://
Get:31 http://
[10.9 kB]
Get:32 http://
Get:33 http://
Packages [28 B]
Get:34 http://
[26.0 kB]
Get:35 http://
Packages [28 B]
Get:36 http://
[10.9 kB]
Get:37 http://
Packages [28 B]
Ign http://
Get:38 http://
[13.7 kB]
Ign http://
Get:39 http://
Translation-en [14 B]
Get:40 http://
Translation-en [14 B]
Get:41 http://
[7,111 B]
Err http://
404 Not Found
Err http://
404 Not Found
Err http://
404 Not Found
Ign http://
Ign http://
Fetched 385 kB in 9s (40.3 kB/s)
W: Failed to fetch
http://
Found
W: Failed to fetch
http://
404 Not Found
W: Failed to fetch
http://
404 Not Found
E: Some index files failed to download. They have been ignored, or old
ones used instead.
barry@barry-
hplip-data system-
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'hplip' is not installed, so not removed
Package 'hplip-data' is not installed, so not removed
Package 'system-
The following packages were automatically installed and are no longer
required:
alien at debugedit g++-4.8 graphicsmagick lib32z1 libappindicator1
libc6-i386 libcapi20-3 libdirac-encoder0 libfreeimage3 libgraphicsmagick3
libhpmud0 libindicator7 libjavascriptco
librpmbuild3
librpmsign1 libsane-hpaio libsoprano4 libstdc++-4.8-dev libtar0
libwebkitgtk
printer-
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
foomatic-filters
The following packages will be REMOVED:
cups cups-filters printer-
The following NEW packages will be installed:
foomatic-filters
0 upgraded, 1 newly installed, 4 to remove and 8 not upgraded.
Need to get 0 B/93.5 kB of archives.
After this operation, 2,824 kB disk space will be freed.
Do you want to continue? [Y/n] y
Preconfiguring packages ...
(Reading database ... 202727 files and directories currently installed.)
Removing printer-
Removing cups (2.0.2-1ubuntu3) ...
Removing printer-
Removing cups-filters (1.0.67-0ubuntu2) ...
Processing triggers for man-db (2.7.0.2-5) ...
Selecting previously unselected package foomatic-filters.
(Reading database ... 202576 files and directories currently installed.)
Preparing to unpack .../foomatic-
Unpacking foomatic-filters (4.0.17-6) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up foomatic-filters (4.0.17-6) ...
W: Duplicate sources.list entry http://
vivid/partner amd64 Packages
(/var/lib/
W: Duplicate sources.list entry http://
vivid/partner i386 Packages
(/var/lib/
W: You may want to run apt-get update to correct these problems
barry@barry-
axel cups
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version.
dc is already the newest version.
groff is already the newest version.
axel is already the newest version.
tix is already the newest version.
The following packages were automatically installed and are no longer
required:
alien at debugedit g++-4.8 graphicsmagick lib32z1 libappindicator1
libc6-i386 libcapi20-3 libdirac-encoder0 libfreeimage3 libgraphicsmagick3
libhpmud0 libindicator7 libjavascriptco
librpmbuild3
librpmsign1 libsane-hpaio libsoprano4 libstdc++-4.8-dev libtar0
libwebkitgtk
printer-
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
cups-filters printer-
Suggested packages:
printer-
The following packages will be REMOVED:
foomatic-filters
The following NEW packages will be installed:
cups cups-filters printer-
0 upgraded, 3 newly installed, 1 to remove and 8 not upgraded.
Need to get 0 B/976 kB of archives.
After this operation, 2,707 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Preconfiguring packages ...
(Reading database ... 202604 files and directories currently installed.)
Removing foomatic-filters (4.0.17-6) ...
Processing triggers for man-db (2.7.0.2-5) ...
Selecting previously unselected package cups-filters.
(Reading database ... 202576 files and directories currently installed.)
Preparing to unpack .../cups-
Unpacking cups-filters (1.0.67-0ubuntu2) ...
Selecting previously unselected package cups.
Preparing to unpack .../cups_
Unpacking cups (2.0.2-1ubuntu3) ...
Selecting previously unselected package printer-
Preparing to unpack
.../printer-
Unpacking printer-
Processing triggers for man-db (2.7.0.2-5) ...
Setting up cups-filters (1.0.67-0ubuntu2) ...
Setting up cups (2.0.2-1ubuntu3) ...
Updating PPD files for cups ...
Setting up printer-
barry@barry-
system-
Reading package lists... Done
Building dependency tree
Reading state information... Done
cups-filters is already the newest version.
cups-filters set to manually installed.
system-
unp is already the newest version.
The following packages were automatically installed and are no longer
required:
alien at debugedit g++-4.8 graphicsmagick lib32z1 libappindicator1
libc6-i386 libcapi20-3 libdirac-encoder0 libfreeimage3 libgraphicsmagick3
libhpmud0 libindicator7 libjavascriptco
librpmbuild3 librpmsign1 libsane-hpaio libsoprano4 libstdc++-4.8-dev
libtar0
libwebkitgtk
printer-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 8 not upgraded.
barry@barry-
barry@barry-
barry@barry-
rm: cannot remove ‘foo*’: No such file or directory
barry@barry-
Initializing download: http://
Opening output file foo2zjs.tar.gz
Server unsupported, starting from scratch with one connection.
Starting download
[ 0%] .......... .......... .......... .......... .......... [ 265.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 429.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 548.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 635.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 703.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 757.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 800.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 836.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 867.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 893.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 915.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 935.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 951.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 967.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 980.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 992.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1004.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1013.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1023.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1030.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1038.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1045.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1052.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1058.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1064.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1069.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1074.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1079.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1083.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1087.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1074.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1070.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1065.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1067.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1071.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1075.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1078.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1081.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1085.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1088.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1091.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1094.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1096.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1099.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1101.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1104.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1106.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1108.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1110.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1112.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1114.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1116.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1118.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1117.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1109.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1069.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1065.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1068.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1070.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1072.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1075.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1077.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1079.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1081.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1083.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1085.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1086.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1088.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1090.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1091.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1093.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1095.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1096.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1098.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1099.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1100.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1102.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1103.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1105.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1106.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1107.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1108.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1110.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1111.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1112.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1113.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1113.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1114.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1116.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1117.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1118.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1119.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1120.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1121.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1122.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1123.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1124.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1124.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1125.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1126.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1127.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1128.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1129.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1130.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1130.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1131.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1132.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1133.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1133.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1134.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1135.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1136.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1136.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1137.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1138.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1138.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1139.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1140.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1140.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1141.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1142.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1142.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1143.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1143.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1144.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1145.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1145.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1146.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1146.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1147.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1147.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1148.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1148.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1149.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1149.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1150.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1150.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1151.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1151.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1152.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1152.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1153.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1153.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1154.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1154.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1154.9KB/s]
[ 0%] .......... .......... .......... .......... .......... [1155.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1155.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1156.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1156.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1157.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1157.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1157.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1158.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1158.6KB/s]
[ 0%] .......... .......... .......... .......... .......... [1159.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1159.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [1159.7KB/s]
[ 0%] .......... .......... .......... .......... .......... [1160.0KB/s]
[ 0%] .......... .......... .......... .......... .......... [1160.4KB/s]
[ 0%] .......... .......... .......... .......... .......... [1160.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1161.1KB/s]
[ 0%] .......... .......... .......... .......... .......... [1161.5KB/s]
[ 0%] .......... .......... .......... .......... .......... [1161.8KB/s]
[ 0%] .......... .......... .......... .......... .......... [1162.2KB/s]
[ 0%] .......... .......... .......... .......... .......... [1162.5KB/s]
[ 0%] ..........
Connection 0 finished
Downloaded 8310.0 kilobytes in 7 seconds. (1162.56 KB/s)
barry@barry-
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
gzip: foo2zjs.tar.gz: not in gzip format
gzip: foo2zjs.tar.gz: not in gzip format
foo2zjs/COPYING
foo2zjs/ChangeLog
foo2zjs/INSTALL
foo2zjs/INSTALL.in
foo2zjs/INSTALL.osx
foo2zjs/INSTALL.usb
foo2zjs/Makefile
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/README
foo2zjs/README.in
foo2zjs/align.ps
foo2zjs/
foo2zjs/arm2hpdl.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/cups.h
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2hbpl2.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2hp.1in
foo2zjs/foo2hp.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2lava.c
foo2zjs/
foo2zjs/
foo2zjs/foo2oak.1in
foo2zjs/foo2oak.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2qpdl.c
foo2zjs/
foo2zjs/
foo2zjs/foo2slx.1in
foo2zjs/foo2slx.c
foo2zjs/
foo2zjs/
foo2zjs/foo2xqx.1in
foo2zjs/foo2xqx.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2zjs.1in
foo2zjs/foo2zjs.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/gamma.ps
foo2zjs/getweb.in
foo2zjs/
foo2zjs/
foo2zjs/hbpl.h
foo2zjs/
foo2zjs/
foo2zjs/hiperc.h
foo2zjs/
foo2zjs/
foo2zjs/hplj1000
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/jbig.c
foo2zjs/jbig.h
foo2zjs/jbig_ar.c
foo2zjs/jbig_ar.h
foo2zjs/
foo2zjs/
foo2zjs/macros.man
foo2zjs/modify-ppd
foo2zjs/msexpand
foo2zjs/oak.h
foo2zjs/
foo2zjs/oakdecode.c
foo2zjs/
foo2zjs/opldecode.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/ppd-adjust
foo2zjs/
foo2zjs/
foo2zjs/qpdl.h
foo2zjs/
foo2zjs/
foo2zjs/regress.txt
foo2zjs/slx.h
foo2zjs/
foo2zjs/slxdecode.c
foo2zjs/testpage.ps
foo2zjs/
foo2zjs/
foo2zjs/xqx.h
foo2zjs/
foo2zjs/xqxdecode.c
foo2zjs/zjs.h
foo2zjs/
foo2zjs/zjsdecode.c
WARNING: There were errors while processing files!
barry@barry-
barry@barry-
#
# Dependencies...
#
# ... OK!
#
cc -O2 -Wall -c -o foo2zjs.o foo2zjs.c
cc -O2 -Wall -c -o jbig.o jbig.c
cc -O2 -Wall -c -o jbig_ar.o jbig_ar.c
cc -O2 -Wall -o foo2zjs foo2zjs.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o zjsdecode.o zjsdecode.c
cc -O2 -Wall zjsdecode.o jbig.o jbig_ar.o -o zjsdecode
cc -O2 -Wall arm2hpdl.c -o arm2hpdl
cc -O2 -Wall -c -o foo2hp.o foo2hp.c
# cc -O2 -Wall -o foo2hp foo2hp.o jbig.o jbig_ar.o
/usr/local/
cc -O2 -Wall -o foo2hp foo2hp.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o foo2xqx.o foo2xqx.c
cc -O2 -Wall -o foo2xqx foo2xqx.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o xqxdecode.o xqxdecode.c
cc -O2 -Wall xqxdecode.o jbig.o jbig_ar.o -o xqxdecode
cc -O2 -Wall -c -o foo2lava.o foo2lava.c
cc -O2 -Wall -o foo2lava foo2lava.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o lavadecode.o lavadecode.c
cc -O2 -Wall lavadecode.o jbig.o jbig_ar.o -o lavadecode
cc -O2 -Wall -c -o foo2qpdl.o foo2qpdl.c
cc -O2 -Wall -o foo2qpdl foo2qpdl.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o qpdldecode.o qpdldecode.c
cc -O2 -Wall qpdldecode.o jbig.o jbig_ar.o -o qpdldecode
cc -O2 -Wall -c -o opldecode.o opldecode.c
cc -O2 -Wall -g opldecode.o jbig.o jbig_ar.o -o opldecode
cc -O2 -Wall -c -o foo2oak.o foo2oak.c
cc -O2 -Wall -o foo2oak foo2oak.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o oakdecode.o oakdecode.c
cc -O2 -Wall -g oakdecode.o jbig.o jbig_ar.o -o oakdecode
cc -O2 -Wall -c -o foo2slx.o foo2slx.c
cc -O2 -Wall -o foo2slx foo2slx.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o slxdecode.o slxdecode.c
cc -O2 -Wall slxdecode.o jbig.o jbig_ar.o -o slxdecode
cc -O2 -Wall -c -o foo2hiperc.o foo2hiperc.c
cc -O2 -Wall -o foo2hiperc foo2hiperc.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o hipercdecode.o hipercdecode.c
cc -O2 -Wall hipercdecode.o jbig.o jbig_ar.o -o hipercdecode
cc -O2 -Wall -c -o foo2hbpl2.o foo2hbpl2.c
cc -O2 -Wall -o foo2hbpl2 foo2hbpl2.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o hbpldecode.o hbpldecode.c
cc -O2 -Wall hbpldecode.o jbig.o jbig_ar.o -o hbpldecode
cc -O2 -Wall -c -o gipddecode.o gipddecode.c
cc -O2 -Wall gipddecode.o jbig.o jbig_ar.o -o gipddecode
cc -O2 -Wall -I/usr/
cc -O2 -Wall -L/usr/local/lib command2foo2lav
command2foo2lav
cc -O2 -Wall usb_printerid.c -o usb_printerid
[ ! -f foo2zjs-wrapper ] || chmod +w foo2zjs-wrapper
sed < foo2zjs-wrapper.in > foo2zjs-wrapper \
-e 's@^PREFIX=
chmod 555 foo2zjs-wrapper
[ ! -f foo2oak-wrapper ] || chmod +w foo2oak-wrapper
sed < foo2oak-wrapper.in > foo2oak-wrapper \
-e 's@^PREFIX=
chmod 555 foo2oak-wrapper
[ ! -f foo2hp2600-wrapper ] || chmod +w foo2hp2600-wrapper
sed < foo2hp2600-
-e 's@^PREFIX=
chmod 555 foo2hp2600-wrapper
[ ! -f foo2xqx-wrapper ] || chmod +w foo2xqx-wrapper
sed < foo2xqx-wrapper.in > foo2xqx-wrapper \
-e 's@^PREFIX=
chmod 555 foo2xqx-wrapper
[ ! -f foo2lava-wrapper ] || chmod +w foo2lava-wrapper
sed < foo2lava-wrapper.in > foo2lava-wrapper \
-e 's@^PREFIX=
chmod 555 foo2lava-wrapper
[ ! -f foo2qpdl-wrapper ] || chmod +w foo2qpdl-wrapper
sed < foo2qpdl-wrapper.in > foo2qpdl-wrapper \
-e 's@^PREFIX=
chmod 555 foo2qpdl-wrapper
[ ! -f foo2slx-wrapper ] || chmod +w foo2slx-wrapper
sed < foo2slx-wrapper.in > foo2slx-wrapper \
-e 's@^PREFIX=
chmod 555 foo2slx-wrapper
[ ! -f foo2hiperc-wrapper ] || chmod +w foo2hiperc-wrapper
sed < foo2hiperc-
-e 's@^PREFIX=
chmod 555 foo2hiperc-wrapper
[ ! -f foo2hbpl2-wrapper ] || chmod +w foo2hbpl2-wrapper
sed < foo2hbpl2-
-e 's@^PREFIX=
chmod 555 foo2hbpl2-wrapper
cat foo2zjs-pstops.sh >foo2zjs-pstops
chmod a+x foo2zjs-pstops
cat printer-profile.sh >printer-profile
chmod a+x printer-profile
[ ! -f getweb ] || chmod +w getweb
sed < getweb.in > getweb \
-e "s@\${URLZJS}@http://
-e 's@^PREFIX=
chmod 555 getweb
cd icc2ps; make all
make[1]: Entering directory '/tmp/foo2zjs/
cc -O3 icc2ps.c xgetopt.c cmscam97.c cmscnvrt.c cmserr.c cmsgamma.c
cmsgmt.c cmsintrp.c cmsio1.c cmslut.c cmsmatsh.c cmsmtrx.c cmsnamed.c
cmspack.c cmspcs.c cmsps2.c cmssamp.c cmswtpnt.c cmsxform.c cmsio0.c
cmsvirt.c -lm -o foo2zjs-icc2ps
rm -f foo2zjs-icc2ps.1
MODver=; \
../includer-man -v DEF1= foo2zjs-icc2ps.1in | sed > foo2zjs-icc2ps.1 \
-e "s@\${URLOAK}@@" \
-e "s@\${URLZJS}@@" \
-e "s@\${URLHP}@@" \
-e "s@\${URLXQX}@@" \
-e "s@\${URLLAVA}@@" \
-e "s@\${URLQPDL}@@" \
-e "s@\${URLSLX}@@" \
-e "s@\${URLHC}@@" \
-e "s/\${MODver}
chmod -w foo2zjs-icc2ps.1
make[1]: Leaving directory '/tmp/foo2zjs/
rm -f foo2zjs-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2zjs-
MODver=0.0; \
./includer-man -v DEF1= foo2zjs-wrapper.1in | sed > foo2zjs-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2zjs-wrapper.1
rm -f foo2zjs.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2zjs.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2zjs.1in | sed > foo2zjs.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2zjs.1
rm -f zjsdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime zjsdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= zjsdecode.1in | sed > zjsdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w zjsdecode.1
rm -f foo2oak-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2oak-
MODver=0.0; \
./includer-man -v DEF1= foo2oak-wrapper.1in | sed > foo2oak-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2oak-wrapper.1
rm -f foo2oak.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2oak.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2oak.1in | sed > foo2oak.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2oak.1
rm -f oakdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime oakdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= oakdecode.1in | sed > oakdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w oakdecode.1
rm -f foo2hp2600-
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hp2600-
MODver=0.0; \
./includer-man -v DEF1= foo2hp2600-
foo2hp2600-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hp2600-
rm -f foo2hp.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hp.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2hp.1in | sed > foo2hp.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hp.1
rm -f foo2xqx-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2xqx-
MODver=0.0; \
./includer-man -v DEF1= foo2xqx-wrapper.1in | sed > foo2xqx-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2xqx-wrapper.1
rm -f foo2xqx.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2xqx.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2xqx.1in | sed > foo2xqx.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2xqx.1
rm -f xqxdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime xqxdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= xqxdecode.1in | sed > xqxdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w xqxdecode.1
rm -f foo2lava-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2lava-
MODver=0.0; \
./includer-man -v DEF1= foo2lava-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2lava-wrapper.1
rm -f foo2lava.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2lava.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2lava.1in | sed > foo2lava.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2lava.1
rm -f lavadecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime lavadecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= lavadecode.1in | sed > lavadecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w lavadecode.1
rm -f opldecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime opldecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= opldecode.1in | sed > opldecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w opldecode.1
rm -f foo2qpdl-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2qpdl-
MODver=0.0; \
./includer-man -v DEF1= foo2qpdl-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2qpdl-wrapper.1
rm -f foo2qpdl.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2qpdl.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2qpdl.1in | sed > foo2qpdl.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2qpdl.1
rm -f qpdldecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime qpdldecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= qpdldecode.1in | sed > qpdldecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w qpdldecode.1
rm -f foo2slx-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2slx-
MODver=0.0; \
./includer-man -v DEF1= foo2slx-wrapper.1in | sed > foo2slx-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2slx-wrapper.1
rm -f foo2slx.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2slx.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2slx.1in | sed > foo2slx.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2slx.1
rm -f slxdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime slxdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= slxdecode.1in | sed > slxdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w slxdecode.1
rm -f foo2hiperc-
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hiperc-
MODver=0.0; \
./includer-man -v DEF1= foo2hiperc-
foo2hiperc-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hiperc-
rm -f foo2hiperc.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hiperc.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2hiperc.1in | sed > foo2hiperc.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hiperc.1
rm -f hipercdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime hipercdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= hipercdecode.1in | sed > hipercdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w hipercdecode.1
rm -f foo2hbpl2-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hbpl2-
MODver=0.0; \
./includer-man -v DEF1= foo2hbpl2-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hbpl2-wrapper.1
rm -f foo2hbpl2.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hbpl2.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2hbpl2.1in | sed > foo2hbpl2.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hbpl2.1
rm -f hbpldecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime hbpldecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= hbpldecode.1in | sed > hbpldecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w hbpldecode.1
rm -f gipddecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime gipddecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= gipddecode.1in | sed > gipddecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w gipddecode.1
rm -f foo2zjs-pstops.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2zjs-
MODver=0.0; \
./includer-man -v DEF1= foo2zjs-pstops.1in | sed > foo2zjs-pstops.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2zjs-pstops.1
rm -f arm2hpdl.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime arm2hpdl.1in`; \
MODver=0.0; \
./includer-man -v DEF1= arm2hpdl.1in | sed > arm2hpdl.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w arm2hpdl.1
rm -f usb_printerid.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime usb_printerid.1in`; \
MODver=0.0; \
./includer-man -v DEF1= usb_printerid.1in | sed > usb_printerid.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w usb_printerid.1
rm -f printer-profile.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime printer-
MODver=0.0; \
./includer-man -v DEF1= printer-profile.1in | sed > printer-profile.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w printer-profile.1
cd icc2ps; make man
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'man'.
make[1]: Leaving directory '/tmp/foo2zjs/
cd osx-hotplug; make man
make[1]: Entering directory '/tmp/foo2zjs/
rm -f osx-hplj-hotplug.1
MODver=; \
../includer-man -v DEF1= osx-hplj-
-e "s@\${URLOAK}@@" \
-e "s@\${URLZJS}@@" \
-e "s@\${URLHP}@@" \
-e "s@\${URLXQX}@@" \
-e "s@\${URLLAVA}@@" \
-e "s@\${URLQPDL}@@" \
-e "s@\${URLSLX}@@" \
-e "s@\${URLHC}@@" \
-e "s/\${MODver}
chmod -w osx-hplj-hotplug.1
make[1]: Leaving directory '/tmp/foo2zjs/
groff -t -man \
`ls foo2zjs-wrapper.1 foo2zjs.1 zjsdecode.1 foo2oak-wrapper.1
foo2oak.1 oakdecode.1 foo2hp2600-
foo2xqx.1 xqxdecode.1 foo2lava-wrapper.1 foo2lava.1 lavadecode.1
opldecode.1 foo2qpdl-wrapper.1 foo2qpdl.1 qpdldecode.1 foo2slx-wrapper.1
foo2slx.1 slxdecode.1 foo2hiperc-
foo2hbpl2-wrapper.1 foo2hbpl2.1 hbpldecode.1 gipddecode.1
foo2zjs-pstops.1 arm2hpdl.1 usb_printerid.1 printer-profile.1 \
icc2ps/
osx-
| sort` \
| ps2pdf - manual.pdf
It is possible that certain products which can be built using this
software module might form inventions protected by patent rights in
some countries (e.g., by patents about arithmetic coding algorithms
owned by IBM and AT&T in the USA). Provision of this software by the
author does NOT include any licences for any patents. In those
countries where a patent licence is required for certain applications
of this software module, you will have to obtain such a licence
yourself.
barry@barry-
firmware file
sihp1000.img
(c) Copyright Hewlett-Packard 2001
barry@barry-
#
# Dependencies...
#
# ... OK!
#
cd icc2ps; make all
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/tmp/foo2zjs/
cd icc2ps; make man
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'man'.
make[1]: Leaving directory '/tmp/foo2zjs/
cd osx-hotplug; make man
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'man'.
make[1]: Leaving directory '/tmp/foo2zjs/
It is possible that certain products which can be built using this
software module might form inventions protected by patent rights in
some countries (e.g., by patents about arithmetic coding algorithms
owned by IBM and AT&T in the USA). Provision of this software by the
author does NOT include any licences for any patents. In those
countries where a patent licence is required for certain applications
of this software module, you will have to obtain such a licence
yourself.
#
# Installation Dependencies...
#
# ... OK!
#
#
# Install driver, wrapper, and development tools
#
install -d /usr/bin
install -c foo2zjs zjsdecode arm2hpdl foo2hp foo2xqx xqxdecode foo2lava
lavadecode foo2qpdl qpdldecode opldecode foo2oak oakdecode foo2slx
slxdecode foo2hiperc hipercdecode foo2hbpl2 hbpldecode gipddecode
command2foo2lav
foo2xqx-wrapper foo2lava-wrapper foo2qpdl-wrapper foo2slx-wrapper
foo2hiperc-wrapper foo2hbpl2-wrapper foo2zjs-pstops printer-profile
/usr/bin/
if [ " usb_printerid" != "" ]; then \
install -d /bin/; \
install -c usb_printerid /bin/; \
fi
#
# Install gamma correction files. These are just templates,
# and don't actually do anything right now. If anybody wants
# to tune them or point me at a process for doing that, please...
#
install -d /usr/share/foo2zjs/
install -c -m 644 gamma.ps /usr/share/foo2zjs/
install -c -m 644 gamma-lookup.ps /usr/share/foo2zjs/
install -d /usr/share/foo2oak/
install -d /usr/share/foo2hp/
install -d /usr/share/foo2xqx/
install -d /usr/share/
install -d /usr/share/
#
# Install ICM to Postscript file conversion utility
#
cd icc2ps; make PREFIX=/usr install
make[1]: Entering directory '/tmp/foo2zjs/
install -c foo2zjs-icc2ps /usr/bin
make[1]: Leaving directory '/tmp/foo2zjs/
#
# Install extra files (ICM and firmware), if any exist here.
#
# Get files from the printer manufacturer, i.e. www.minolta-
# or use the "./getweb" convenience script.
#
install -d /usr/share/foo2zjs/
# foo2zjs ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in DL*.icm CP*.icm km2430*.icm hp-cp1025*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2zjs Firmware files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in sihp1*.img; do \
if [ -f $i ]; then \
base=`basename $i .img`; \
./arm2hpdl $i >$base.dl; \
install -c -m 644 $base.dl /usr/share/
fi; \
done
# foo2xqx Firmware files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in sihpP*.img; do \
if [ -f $i ]; then \
base=`basename $i .img`; \
./arm2hpdl $i >$base.dl; \
install -c -m 644 $base.dl /usr/share/
fi; \
done
# foo2oak ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in hpclj2[56]*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2hp ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in hpclj26*.icm km2430*.icm hp1215*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2lava ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in km-1600*.icm km2530*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2qpdl ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in samclp*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2slx ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in lex*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2hiperc ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in OK*.icm C3400*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2hbpl ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in hbpl*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
#
# Install prebuilt CRD files (from m2300w project)
#
install -d /usr/share/foo2zjs/
install -oroot -glp -m 775 -d /usr/share/
for i in crd/zjs/*.*; do \
install -c -m 644 $i /usr/share/
done
#
# Install prebuilt CRD files for CLP-300/CLP-600
#
install -d /usr/share/
install -oroot -glp -m 775 -d /usr/share/
for i in crd/qpdl/*cms* crd/qpdl/*.ps; do \
install -c -m 644 $i /usr/share/
done
#
# Remove obsolete foomatic database files from previous versions
#
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
#
# Install current database files
#
***
*** WARNING! You don't have directory /usr/share/
*** If you want support for foomatic printer configuration,
*** then you will have to manually install these files...
***
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
***
*** ... wherever foomatic is stashed on your machine.
***
#
# Clear foomatic cache and rebuild database if needed
#
rm -rf /var/cache/
rm -f /var/cache/
if [ -d /var/cache/
cd /var/cache/
foomatic-
fi
#
# Install PPD files for CUPS
#
export PATH=$PATH:`pwd`:; \
if [ -x /usr/sbin/ppdmgr -a -s /var/lp/
install -glp -d /var/lp/ppd/user; \
cd PPD; \
for ppd in *.ppd; do \
manuf=`echo "$ppd" | sed 's/-.*//'`; \
install -glp -d /var/lp/
modify-ppd <$ppd | gzip > /var/lp/
chmod 664 /var/lp/
done; \
ppdmgr -u; \
elif [ -d /usr/share/ppd ]; then \
find /usr/share/ppd -name '*foo2zjs*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2hp*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2xqx*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2lava*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2qpdl*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2slx*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2hiperc*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2hbpl*' | xargs rm -rf; \
[ -d /usr/share/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip > /usr/share/
chmod 664 /usr/share/
done; \
fi
#
export PATH=$PATH:`pwd`:; \
if [ -d /usr/share/
rm -f /usr/share/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip > /usr/share/
chmod 664 /usr/share/
done; \
elif [ -d /usr/local/
rm -f /usr/local/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip > /usr/local/
chmod 664 /usr/local/
done; \
elif [ -d /Library/
rm -f /Library/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip >
/Library/
chmod 664 /Library/
done; \
fi
#
# Install GUI
#
install -c -m 644 hplj1020_icon.gif /usr/share/foo2zjs
install -c -m 755 hplj10xx_gui.tcl /usr/share/foo2zjs
#
# Install GNOME desktop
#
if [ -d /usr/share/
install -c -m 644 hplj1020.desktop /usr/share/
fi
if [ -d /usr/share/
install -c -m 644 hplj1020.desktop /usr/share/
fi
if [ -d /usr/share/pixmaps ]; then \
install -c -m 644 hplj1020_icon.png /usr/share/pixmaps; \
fi
if [ "/usr/lib/cups" != "" ]; then \
ln -sf /usr/bin/
fi
#
# Install manual pages
#
install -d -m 755 /usr/share/man
install -d -m 755 /usr/share/
install -c -m 644 foo2zjs.1 /usr/share/
install -c -m 644 foo2zjs-wrapper.1 /usr/share/
install -c -m 644 zjsdecode.1 /usr/share/
install -c -m 644 foo2oak.1 /usr/share/
install -c -m 644 foo2oak-wrapper.1 /usr/share/
install -c -m 644 oakdecode.1 /usr/share/
install -c -m 644 foo2hp.1 /usr/share/
install -c -m 644 foo2hp2600-
install -c -m 644 foo2xqx.1 /usr/share/
install -c -m 644 foo2xqx-wrapper.1 /usr/share/
install -c -m 644 xqxdecode.1 /usr/share/
install -c -m 644 foo2lava.1 /usr/share/
install -c -m 644 foo2lava-wrapper.1 /usr/share/
install -c -m 644 lavadecode.1 /usr/share/
install -c -m 644 opldecode.1 /usr/share/
install -c -m 644 foo2qpdl.1 /usr/share/
install -c -m 644 foo2qpdl-wrapper.1 /usr/share/
install -c -m 644 qpdldecode.1 /usr/share/
install -c -m 644 foo2slx.1 /usr/share/
install -c -m 644 foo2slx-wrapper.1 /usr/share/
install -c -m 644 slxdecode.1 /usr/share/
install -c -m 644 foo2hiperc.1 /usr/share/
install -c -m 644 foo2hiperc-
install -c -m 644 hipercdecode.1 /usr/share/
install -c -m 644 foo2hbpl2.1 /usr/share/
install -c -m 644 foo2hbpl2-wrapper.1 /usr/share/
install -c -m 644 hbpldecode.1 /usr/share/
install -c -m 644 gipddecode.1 /usr/share/
install -c -m 644 foo2zjs-pstops.1 /usr/share/
install -c -m 644 arm2hpdl.1 /usr/share/
install -c -m 644 usb_printerid.1 /usr/share/
install -c -m 644 printer-profile.1 /usr/share/
cd icc2ps; make install-man
make[1]: Entering directory '/tmp/foo2zjs/
install -d -m 755 /usr/share/man
install -d -m 755 /usr/share/
install -c -m 644 foo2zjs-icc2ps.1 /usr/share/
make[1]: Leaving directory '/tmp/foo2zjs/
#
# Install documentation
#
install -d -m 755 /usr/share/
install -c -m 644 manual.pdf /usr/share/
install -c -m 644 COPYING /usr/share/
install -c -m 644 INSTALL /usr/share/
install -c -m 644 INSTALL.osx /usr/share/
install -c -m 644 README /usr/share/
install -c -m 644 ChangeLog /usr/share/
#
# If you use CUPS, then restart the spooler:
# make cups
#
# Now use your printer configuration GUI to create a new printer.
#
# On Redhat 7.2/7.3/8.0/9.0 and Fedora Core 1-5, run "printconf-gui".
# On Fedora 6/7/8/9/10/11/12, run "system-
# On Mandrake, run "printerdrake"
# On Suse 9.x/10.x/11.x, run "yast"
# On Ubuntu 5.10/6.
# On Ubuntu 7.10/8.x/9.x, run "system-
barry@barry-
#
# Hotplug Installation Dependencies...
#
# ... OK!
#
#
# remove HPLIP (proprietary) files and install our version
#
if [ -d /etc/udev/rules.d ]; then \
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /lib/udev/
rm -f /lib/udev/
rm -f /lib/udev/
if [ -x /sbin/udevd ]; then \
version=
elif [ -x /usr/lib/udev/udevd ]; then \
version=
elif [ -x /usr/lib/
version=
fi; \
if [ "$version" = "" ]; then version=0; fi; \
echo "*** udev version $version"; \
if [ "$version" -lt 148 ]; then \
install -c -m 644 hplj10xx.rules.old
/etc/udev/
else \
install -c -m 644 hplj10xx.rules /etc/udev/
fi \
fi
*** udev version 219
if [ -d /etc/devd ]; then \
install -c -m 644 hplj10xx.conf /etc/devd/; \
fi
[ -d /etc/hotplug/usb ] || install -d -m 755 /etc/hotplug/usb/
install -c -m 755 hplj1000 /etc/hotplug/usb/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
# modprobe usblp
/etc/hotplug/
barry@barry-
Unknown value for media-col: (unknown IPP value tag 0x34)
Choices: ['media-
'media-
'media-type']
Selecting from choices: media-bottom-margin
Unknown value for media-col: (unknown IPP value tag 0x34)
Choices: ['media-
'media-
'media-type']
Selecting from choices: media-bottom-margin
barry@barry-
May 6 10:17:00 barry-desktop colord[1556]: (colord:1556): Cd-WARNING
**: failed to get session [pid 5545]: Unknown error -2
May 6 10:17:01 barry-desktop CRON[7936]: (root) CMD ( cd / &&
run-parts --report /etc/cron.hourly)
May 6 10:17:03 barry-desktop kernel: [ 781.694196] usblp1: removed
May 6 10:17:03 barry-desktop foo2zjs-wrapper: foo2zjs-wrapper -P
-r600x600 -p9 -m1 -s7 -n1
May 6 10:17:04 barry-desktop foo2zjs-wrapper: gs -sPAPERSIZE=a4
-g4960x7016 -r600x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=
May 6 10:17:04 barry-desktop foo2zjs-wrapper: foo2zjs -r600x600
-g4960x7016 -p9 -m1 -n1 -d1 -s7 -z0 -u 112x100 -l 112x100 -T3 -P
May 6 10:17:04 barry-desktop kernel: [ 782.954176] usblp 7-2:1.0:
usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0
pid 0x0517
May 6 10:17:07 barry-desktop /etc/hotplug/
LaserJet 1000 firmware already loaded into /dev/usb/lp1
May 6 10:16:54 barry-desktop org.freedesktop
DEBUG:Updating last_timestamp
May 6 10:17:25 barry-desktop org.freedesktop
DEBUG:Checking for inactivity (30s)
barry@barry-
Thanks for your help.
Regards
BM.
_______
On 05/05/15 19:31, Mark Rijckenberg wrote:
> Your question #266394 on Ubuntu changed:
> https:/
>
> Status: Open => Needs information
>
> Mark Rijckenberg requested more information:
> Please send the output from ALL the commands, not only the second half.
>
> Thanks.
>
|
Revision history for this message
|
#5 |
Hi Mark,
Further to reply of a couple of minutes ago. The printer did print one
news article, but then stopped. So I am now back to the printer not working.
BM.
_______
On 05/05/15 19:31, Mark Rijckenberg wrote:
> Your question #266394 on Ubuntu changed:
> https:/
>
> Status: Open => Needs information
>
> Mark Rijckenberg requested more information:
> Please send the output from ALL the commands, not only the second half.
>
> Thanks.
>
|
Revision history for this message
|
#6 |
Your Terminal output shows this error:
[ 0%] .......... .......... .......... .......... .......... [1162.5KB/s]
[ 0%] ..........
Connection 0 finished
Downloaded 8310.0 kilobytes in 7 seconds. (1162.56 KB/s)
barry@barry-
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
gzip: foo2zjs.tar.gz: not in gzip format
So the printer driver package foo2zjs.tar.gz was not fully downloaded, it seems....
Maybe retry the whole driver installation procedure again?
|
Revision history for this message
|
#7 |
I ran the whole procedure again - no joy. What does "power cycle both
the PC and HP printer" mean?.
Here is the output from this morning's attempt:
barry@barry-
[sudo] password for barry:
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Get:1 http://
Ign http://
Ign http://
Hit http://
Hit http://
Get:2 http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:3 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:4 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:5 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:6 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:7 http://
Get:8 http://
Hit http://
Get:9 http://
Get:10 http://
Get:11 http://
[26.4 kB]
Get:12 http://
Get:13 http://
Packages [28 B]
Get:14 http://
Get:15 http://
[10.9 kB]
Get:16 http://
Get:17 http://
Packages [28 B]
Get:18 http://
Get:19 http://
[26.0 kB]
Get:20 http://
Get:21 http://
Packages [28 B]
Get:22 http://
Get:23 http://
[10.9 kB]
Get:24 http://
Packages [28 B]
Get:25 http://
[13.7 kB]
Get:26 http://
Translation-en [14 B]
Get:27 http://
Translation-en [14 B]
Err http://
404 Not Found
Get:28 http://
[7,111 B]
Err http://
404 Not Found
Err http://
404 Not Found
Ign http://
Ign http://
Fetched 198 kB in 9s (20.5 kB/s)
W: Failed to fetch
http://
Found
W: Failed to fetch
http://
404 Not Found
W: Failed to fetch
http://
404 Not Found
E: Some index files failed to download. They have been ignored, or old
ones used instead.
barry@barry-
hplip-data system-
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'hplip' is not installed, so not removed
Package 'hplip-data' is not installed, so not removed
Package 'system-
The following packages were automatically installed and are no longer
required:
alien at debugedit g++-4.8 graphicsmagick lib32z1 libappindicator1
libc6-i386 libcapi20-3 libdirac-encoder0 libfreeimage3 libgraphicsmagick3
libhpmud0 libindicator7 libjavascriptco
librpmbuild3 librpmsign1 libsane-hpaio libsoprano4 libstdc++-4.8-dev
libtar0
libwebkitgtk
printer-
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
cups cups-filters printer-
0 upgraded, 0 newly installed, 3 to remove and 2 not upgraded.
After this operation, 3,219 kB disk space will be freed.
Do you want to continue? [Y/n] y
(Reading database ... 232888 files and directories currently installed.)
Removing printer-
Removing cups (2.0.2-1ubuntu3) ...
Removing cups-filters (1.0.67-0ubuntu2) ...
Processing triggers for man-db (2.7.0.2-5) ...
W: Duplicate sources.list entry http://
vivid/partner amd64 Packages
(/var/lib/
W: Duplicate sources.list entry http://
vivid/partner i386 Packages
(/var/lib/
W: You may want to run apt-get update to correct these problems
barry@barry-
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:1 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:2 http://
Hit http://
Hit http://
Get:3 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:4 http://
Hit http://
Hit http://
Hit http://
Get:5 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:6 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:7 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:8 http://
Hit http://
Get:9 http://
[26.4 kB]
Get:10 http://
Get:11 http://
Packages [28 B]
Get:12 http://
Get:13 http://
[10.9 kB]
Get:14 http://
Packages [28 B]
Get:15 http://
[26.0 kB]
Get:16 http://
Get:17 http://
Packages [28 B]
Get:18 http://
[10.9 kB]
Get:19 http://
Get:20 http://
Packages [28 B]
Get:21 http://
[13.7 kB]
Get:22 http://
Translation-en [14 B]
Get:23 http://
Translation-en [14 B]
Get:24 http://
[7,111 B]
Ign http://
Ign http://
Err http://
404 Not Found
Err http://
404 Not Found
Err http://
404 Not Found
Ign http://
Ign http://
Fetched 130 kB in 9s (13.5 kB/s)
W: Failed to fetch
http://
Found
W: Failed to fetch
http://
404 Not Found
W: Failed to fetch
http://
404 Not Found
E: Some index files failed to download. They have been ignored, or old
ones used instead.
barry@barry-
axel cups
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version.
dc is already the newest version.
groff is already the newest version.
axel is already the newest version.
tix is already the newest version.
The following packages were automatically installed and are no longer
required:
alien at debugedit g++-4.8 graphicsmagick lib32z1 libappindicator1
libc6-i386 libcapi20-3 libdirac-encoder0 libfreeimage3 libgraphicsmagick3
libhpmud0 libindicator7 libjavascriptco
librpmbuild3 librpmsign1 libsane-hpaio libsoprano4 libstdc++-4.8-dev
libtar0
libwebkitgtk
printer-
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
cups-filters printer-
Suggested packages:
printer-
The following NEW packages will be installed:
cups cups-filters printer-
0 upgraded, 3 newly installed, 0 to remove and 2 not upgraded.
Need to get 0 B/976 kB of archives.
After this operation, 3,219 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Preconfiguring packages ...
Selecting previously unselected package cups-filters.
(Reading database ... 232749 files and directories currently installed.)
Preparing to unpack .../cups-
Unpacking cups-filters (1.0.67-0ubuntu2) ...
Selecting previously unselected package cups.
Preparing to unpack .../cups_
Unpacking cups (2.0.2-1ubuntu3) ...
Selecting previously unselected package printer-
Preparing to unpack
.../printer-
Unpacking printer-
Processing triggers for man-db (2.7.0.2-5) ...
Setting up cups-filters (1.0.67-0ubuntu2) ...
Setting up cups (2.0.2-1ubuntu3) ...
Updating PPD files for cups ...
Setting up printer-
W: Duplicate sources.list entry http://
vivid/partner amd64 Packages
(/var/lib/
W: Duplicate sources.list entry http://
vivid/partner i386 Packages
(/var/lib/
W: You may want to run apt-get update to correct these problems
barry@barry-
system-
Reading package lists... Done
Building dependency tree
Reading state information... Done
cups-filters is already the newest version.
cups-filters set to manually installed.
system-
unp is already the newest version.
The following packages were automatically installed and are no longer
required:
alien at debugedit g++-4.8 graphicsmagick lib32z1 libappindicator1
libc6-i386 libcapi20-3 libdirac-encoder0 libfreeimage3 libgraphicsmagick3
libhpmud0 libindicator7 libjavascriptco
librpmbuild3 librpmsign1 libsane-hpaio libsoprano4 libstdc++-4.8-dev
libtar0
libwebkitgtk
printer-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
barry@barry-
barry@barry-
barry@barry-
rm: cannot remove ‘foo’: No such file or directory
barry@barry-
Initializing download: http://
File size: 8509440 bytes
Opening output file foo2zjs.tar.gz
Starting download
[ 0%] .......... .......... .......... .......... .......... [ 142.3KB/s]
[ 0%] .......... .......... .......... .......... .......... [ 252.3KB/s]
[ 1%] .......... .......... .......... .......... .......... [ 313.1KB/s]
[ 1%] .......... .......... .......... .......... .......... [ 258.2KB/s]
[ 2%] .......... .......... .......... .......... .......... [ 302.4KB/s]
[ 3%] .......... .......... .......... .......... .......... [ 352.4KB/s]
[ 3%] .......... .......... .......... .......... .......... [ 407.6KB/s]
[ 4%] .......... .......... .......... .......... .......... [ 444.1KB/s]
[ 4%] .......... .......... .......... .......... .......... [ 482.1KB/s]
[ 5%] .......... .......... .......... .......... .......... [ 494.2KB/s]
[ 6%] .......... .......... .......... .......... .......... [ 539.7KB/s]
[ 6%] .......... .......... .......... .......... .......... [ 528.6KB/s]
[ 7%] .......... .......... .......... .......... .......... [ 552.5KB/s]
[ 7%] .......... .......... .......... .......... .......... [ 575.2KB/s]
[ 8%] .......... .......... .......... .......... .......... [ 596.0KB/s]
[ 9%] .......... .......... .......... .......... .......... [ 615.9KB/s]
[ 9%] .......... .......... .......... .......... .......... [ 617.4KB/s]
[ 10%] .......... .......... .......... .......... .......... [ 650.5KB/s]
[ 10%] .......... .......... .......... .......... .......... [ 662.5KB/s]
[ 11%] .......... .......... .......... .......... .......... [ 677.7KB/s]
[ 12%] .......... .......... .......... .......... .......... [ 693.2KB/s]
[ 12%] .......... .......... .......... .......... .......... [ 709.6KB/s]
[ 13%] .......... .......... .......... .......... .......... [ 706.7KB/s]
[ 13%] .......... .......... .......... .......... .......... [ 732.2KB/s]
[ 14%] .......... .......... .......... .......... .......... [ 752.6KB/s]
[ 15%] .......... .......... .......... .......... .......... [ 763.9KB/s]
[ 15%] .......... .......... .......... .......... .......... [ 774.7KB/s]
[ 16%] .......... .......... .......... .......... .......... [ 779.8KB/s]
[ 16%] .......... .......... .......... .......... .......... [ 784.7KB/s]
[ 17%] .......... .......... .......... .......... .......... [ 803.4KB/s]
[ 18%] .......... .......... .......... .......... .......... [ 812.1KB/s]
[ 18%] .......... .......... .......... .......... .......... [ 820.6KB/s]
[ 19%] .......... .......... .......... .......... .......... [ 828.6KB/s]
[ 19%] .......... .......... .......... .......... .......... [ 835.4KB/s]
[ 20%] .......... .......... .......... .......... .......... [ 839.0KB/s]
[ 21%] .......... .......... .......... .......... .......... [ 851.0KB/s]
[ 21%] .......... .......... .......... .......... .......... [ 858.2KB/s]
[ 22%] .......... .......... .......... .......... .......... [ 864.7KB/s]
[ 22%] .......... .......... .......... .......... .......... [ 867.7KB/s]
[ 23%] .......... .......... .......... .......... .......... [ 870.6KB/s]
[ 24%] .......... .......... .......... .......... .......... [ 879.7KB/s]
[ 24%] .......... .......... .......... .......... .......... [ 889.4KB/s]
[ 25%] .......... .......... .......... .......... .......... [ 895.1KB/s]
[ 25%] .......... .......... .......... .......... .......... [ 887.5KB/s]
[ 26%] .......... .......... .......... .......... .......... [ 900.8KB/s]
[ 27%] .......... .......... .......... .......... .......... [ 910.4KB/s]
[ 27%] .......... .......... .......... .......... .......... [ 915.2KB/s]
[ 28%] .......... .......... .......... .......... .......... [ 919.8KB/s]
[ 28%] .......... .......... .......... .......... .......... [ 924.3KB/s]
[ 29%] .......... .......... .......... .......... .......... [ 928.6KB/s]
[ 30%] .......... .......... .......... .......... .......... [ 933.0KB/s]
[ 30%] .......... .......... .......... .......... .......... [ 937.2KB/s]
[ 31%] .......... .......... .......... .......... .......... [ 941.2KB/s]
[ 31%] .......... .......... .......... .......... .......... [ 938.0KB/s]
[ 32%] .......... .......... .......... .......... .......... [ 940.2KB/s]
[ 33%] .......... .......... .......... .......... .......... [ 952.1KB/s]
[ 33%] .......... .......... .......... .......... .......... [ 956.6KB/s]
[ 34%] .......... .......... .......... .......... .......... [ 960.1KB/s]
[ 34%] .......... .......... .......... .......... .......... [ 963.5KB/s]
[ 35%] .......... .......... .......... .......... .......... [ 966.7KB/s]
[ 36%] .......... .......... .......... .......... .......... [ 970.0KB/s]
[ 36%] .......... .......... .......... .......... .......... [ 972.9KB/s]
[ 37%] .......... .......... .......... .......... .......... [ 976.1KB/s]
[ 37%] .......... .......... .......... .......... .......... [ 974.5KB/s]
[ 38%] .......... .......... .......... .......... .......... [ 981.5KB/s]
[ 39%] .......... .......... .......... .......... .......... [ 985.2KB/s]
[ 39%] .......... .......... .......... .......... .......... [ 987.9KB/s]
[ 40%] .......... .......... .......... .......... .......... [ 990.5KB/s]
[ 40%] .......... .......... .......... .......... .......... [ 991.4KB/s]
[ 41%] .......... .......... .......... .......... .......... [ 990.2KB/s]
[ 42%] .......... .......... .......... .......... .......... [ 995.5KB/s]
[ 42%] .......... .......... .......... .......... .......... [1000.8KB/s]
[ 43%] .......... .......... .......... .......... .......... [1003.2KB/s]
[ 43%] .......... .......... .......... .......... .......... [1005.5KB/s]
[ 44%] .......... .......... .......... .......... .......... [1004.0KB/s]
[ 45%] .......... .......... .......... .......... .......... [1007.5KB/s]
[ 45%] .......... .......... .......... .......... .......... [1012.0KB/s]
[ 46%] .......... .......... .......... .......... .......... [1014.7KB/s]
[ 46%] .......... .......... .......... .......... .......... [1016.8KB/s]
[ 47%] .......... .......... .......... .......... .......... [1018.8KB/s]
[ 48%] .......... .......... .......... .......... .......... [1020.8KB/s]
[ 48%] .......... .......... .......... .......... .......... [1016.6KB/s]
[ 49%] .......... .......... .......... .......... .......... [1022.3KB/s]
[ 49%] .......... .......... .......... .......... .......... [1026.7KB/s]
[ 50%] .......... .......... .......... .......... .......... [1028.6KB/s]
[ 51%] .......... .......... .......... .......... .......... [1030.4KB/s]
[ 51%] .......... .......... .......... .......... .......... [1032.1KB/s]
[ 52%] .......... .......... .......... .......... .......... [1033.9KB/s]
[ 52%] .......... .......... .......... .......... .......... [1026.5KB/s]
[ 53%] .......... .......... .......... .......... .......... [1033.1KB/s]
[ 54%] .......... .......... .......... .......... .......... [1039.1KB/s]
[ 54%] .......... .......... .......... .......... .......... [1040.6KB/s]
[ 55%] .......... .......... .......... .......... .......... [1042.2KB/s]
[ 55%] .......... .......... .......... .......... .......... [1043.8KB/s]
[ 56%] .......... .......... .......... .......... .......... [1045.3KB/s]
[ 57%] .......... .......... .......... .......... .......... [1046.9KB/s]
[ 57%] .......... .......... .......... .......... .......... [1048.4KB/s]
[ 58%] .......... .......... .......... .......... .......... [1046.0KB/s]
[ 58%] .......... .......... .......... .......... .......... [1048.2KB/s]
[ 59%] .......... .......... .......... .......... .......... [1050.1KB/s]
[ 60%] .......... .......... .......... .......... .......... [1052.8KB/s]
[ 60%] .......... .......... .......... .......... .......... [1055.7KB/s]
[ 61%] .......... .......... .......... .......... .......... [1057.0KB/s]
[ 61%] .......... .......... .......... .......... .......... [1058.4KB/s]
[ 62%] .......... .......... .......... .......... .......... [1059.7KB/s]
[ 63%] .......... .......... .......... .......... .......... [1058.8KB/s]
[ 63%] .......... .......... .......... .......... .......... [1059.5KB/s]
[ 64%] .......... .......... .......... .......... .......... [1059.8KB/s]
[ 64%] .......... .......... .......... .......... .......... [1060.8KB/s]
[ 65%] .......... .......... .......... .......... .......... [1062.1KB/s]
[ 66%] .......... ......
Connection 2 finished
,,,,,,,,,, ,,,,,,.... .......... .......... .......... [1063.4KB/s]
[ 66%] .......... .......... .......... .......... .......... [1064.5KB/s]
[ 67%] .......... .......... .......... .......... .......... [1066.2KB/s]
[ 67%] .......... .......... .......... .......... .......... [1070.5KB/s]
[ 68%] .......... .......... .......... .......... .......... [1071.6KB/s]
[ 69%] .......... .......... .......... .......... .......... [1072.8KB/s]
[ 69%] .......... .......... .......... .......... .......... [1073.8KB/s]
[ 70%] .......... .......... .......... .......... .......... [1075.0KB/s]
[ 70%] .......... .......... .......... .......... .......... [1076.0KB/s]
[ 71%] .......... .......... .......... .......... .......... [1077.0KB/s]
[ 72%] .......... .......... .......... .......... .......... [1078.1KB/s]
[ 72%] .......... .......... .......... .......... .......... [1073.5KB/s]
[ 73%] .......... .......... .......... .......... .......... [1078.0KB/s]
[ 74%] .......... .......... .......... .......... .......... [1081.0KB/s]
[ 74%] .......... .......... .......... .......... .......... [1081.9KB/s]
[ 75%] .......... .......... .......... .......... .......... [1082.7KB/s]
[ 75%] .......... .......... .......... .......... .......... [1083.7KB/s]
[ 76%] .......... .......... .......... .......... .......... [1081.0KB/s]
[ 77%] .......... .......... .......... .......... .......... [1085.5KB/s]
[ 77%] .......... .......... .......... .......... .......... [1086.5KB/s]
[ 78%] .......... .......... .......... .......... .......... [1087.2KB/s]
[ 78%] .......... .......... .......... .......... .......... [1088.0KB/s]
[ 79%] .......... .......... .......... .......... .......... [1088.8KB/s]
[ 80%] .......... .......... .......... .......... .......... [1089.6KB/s]
[ 80%] .......... .......... .......... .......... .......... [1090.5KB/s]
[ 81%] .......... .......... .......... .......... .......... [1091.3KB/s]
[ 81%] .......... .......... .......... .......... .......... [1092.1KB/s]
[ 82%] .......... .......... .......... .......... .......... [1093.0KB/s]
[ 83%] .......... .......... .......... .......... .......... [1093.8KB/s]
[ 83%] .......... .......... .......... .......... .......... [1094.6KB/s]
[ 84%] .......... .......... .......... .......... .......... [1089.5KB/s]
[ 84%] .......... .......... .......... .......... .......... [1093.6KB/s]
[ 85%] .......... .......... .......... .......... .......... [1096.9KB/s]
[ 86%] .......... .......... .......... .......... .......... [1097.6KB/s]
[ 86%] .......... .......... .......... .......... .......... [1098.2KB/s]
[ 87%] .......... .......... .......... .......... .......... [1098.9KB/s]
[ 87%] .......... .......... .......... .......... .......... [1099.7KB/s]
[ 88%] .......... .......... .......... .......... .......... [1100.3KB/s]
[ 89%] .......... .......... .......... .......... .......... [1101.1KB/s]
[ 89%] .......... .......... .......... .......... .......... [1101.7KB/s]
[ 90%] .......... .......... .......... .......... .......... [1097.7KB/s]
[ 90%] .......... .......... .......... .......... .......... [1101.8KB/s]
[ 91%] .......... .......... .......... .......... .......... [1102.7KB/s]
[ 92%] .......... .......... .......... .......... .......... [1103.4KB/s]
[ 92%] .......... .......... .......... .......... .......... [1104.0KB/s]
[ 93%] .......... .......... .......... .......... .......... [1104.5KB/s]
[ 93%] .......... .......... .......... .......... .......... [1105.2KB/s]
[ 94%] .......... .......... .......... .......... .......... [1105.9KB/s]
[ 95%] .......... .......... .......... .......... .......... [1106.5KB/s]
[ 95%] ..........
Connection 3 finished
,,,,,,,,,, .......... .......... .......... .......... [1107.1KB/s]
[ 96%] .......... .......... .......... .......... .......... [1107.7KB/s]
[ 96%] .......... .......... .......... .......... .......... [1108.3KB/s]
[ 97%] .......... .......... .......... .......... .......... [1109.0KB/s]
[ 98%] .......... .......... .......... .......... .......... [1109.6KB/s]
[ 98%] .......... .......... .......... .......... .......... [1110.3KB/s]
[ 99%] ..........
Connection 1 finished
,,,,,,,,,, .......... .......... .......... .......... [1108.9KB/s]
[ 99%] ..........
Connection 0 finished
Downloaded 8310.0 kilobytes in 7 seconds. (1107.77 KB/s)
barry@barry-
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
gzip: foo2zjs.tar.gz: not in gzip format
gzip: foo2zjs.tar.gz: not in gzip format
foo2zjs/COPYING
foo2zjs/ChangeLog
foo2zjs/INSTALL
foo2zjs/INSTALL.in
foo2zjs/INSTALL.osx
foo2zjs/INSTALL.usb
foo2zjs/Makefile
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/README
foo2zjs/README.in
foo2zjs/align.ps
foo2zjs/
foo2zjs/arm2hpdl.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/cups.h
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2hbpl2.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2hp.1in
foo2zjs/foo2hp.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2lava.c
foo2zjs/
foo2zjs/
foo2zjs/foo2oak.1in
foo2zjs/foo2oak.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2qpdl.c
foo2zjs/
foo2zjs/
foo2zjs/foo2slx.1in
foo2zjs/foo2slx.c
foo2zjs/
foo2zjs/
foo2zjs/foo2xqx.1in
foo2zjs/foo2xqx.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/foo2zjs.1in
foo2zjs/foo2zjs.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/gamma.ps
foo2zjs/getweb.in
foo2zjs/
foo2zjs/
foo2zjs/hbpl.h
foo2zjs/
foo2zjs/
foo2zjs/hiperc.h
foo2zjs/
foo2zjs/
foo2zjs/hplj1000
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/jbig.c
foo2zjs/jbig.h
foo2zjs/jbig_ar.c
foo2zjs/jbig_ar.h
foo2zjs/
foo2zjs/
foo2zjs/macros.man
foo2zjs/modify-ppd
foo2zjs/msexpand
foo2zjs/oak.h
foo2zjs/
foo2zjs/oakdecode.c
foo2zjs/
foo2zjs/opldecode.c
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/
foo2zjs/ppd-adjust
foo2zjs/
foo2zjs/
foo2zjs/qpdl.h
foo2zjs/
foo2zjs/
foo2zjs/regress.txt
foo2zjs/slx.h
foo2zjs/
foo2zjs/slxdecode.c
foo2zjs/testpage.ps
foo2zjs/
foo2zjs/
foo2zjs/xqx.h
foo2zjs/
foo2zjs/xqxdecode.c
foo2zjs/zjs.h
foo2zjs/
foo2zjs/zjsdecode.c
WARNING: There were errors while processing files!
barry@barry-
barry@barry-
#
# Dependencies...
#
# ... OK!
#
cc -O2 -Wall -c -o foo2zjs.o foo2zjs.c
cc -O2 -Wall -c -o jbig.o jbig.c
cc -O2 -Wall -c -o jbig_ar.o jbig_ar.c
cc -O2 -Wall -o foo2zjs foo2zjs.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o zjsdecode.o zjsdecode.c
cc -O2 -Wall zjsdecode.o jbig.o jbig_ar.o -o zjsdecode
cc -O2 -Wall arm2hpdl.c -o arm2hpdl
cc -O2 -Wall -c -o foo2hp.o foo2hp.c
# cc -O2 -Wall -o foo2hp foo2hp.o jbig.o jbig_ar.o
/usr/local/
cc -O2 -Wall -o foo2hp foo2hp.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o foo2xqx.o foo2xqx.c
cc -O2 -Wall -o foo2xqx foo2xqx.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o xqxdecode.o xqxdecode.c
cc -O2 -Wall xqxdecode.o jbig.o jbig_ar.o -o xqxdecode
cc -O2 -Wall -c -o foo2lava.o foo2lava.c
cc -O2 -Wall -o foo2lava foo2lava.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o lavadecode.o lavadecode.c
cc -O2 -Wall lavadecode.o jbig.o jbig_ar.o -o lavadecode
cc -O2 -Wall -c -o foo2qpdl.o foo2qpdl.c
cc -O2 -Wall -o foo2qpdl foo2qpdl.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o qpdldecode.o qpdldecode.c
cc -O2 -Wall qpdldecode.o jbig.o jbig_ar.o -o qpdldecode
cc -O2 -Wall -c -o opldecode.o opldecode.c
cc -O2 -Wall -g opldecode.o jbig.o jbig_ar.o -o opldecode
cc -O2 -Wall -c -o foo2oak.o foo2oak.c
cc -O2 -Wall -o foo2oak foo2oak.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o oakdecode.o oakdecode.c
cc -O2 -Wall -g oakdecode.o jbig.o jbig_ar.o -o oakdecode
cc -O2 -Wall -c -o foo2slx.o foo2slx.c
cc -O2 -Wall -o foo2slx foo2slx.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o slxdecode.o slxdecode.c
cc -O2 -Wall slxdecode.o jbig.o jbig_ar.o -o slxdecode
cc -O2 -Wall -c -o foo2hiperc.o foo2hiperc.c
cc -O2 -Wall -o foo2hiperc foo2hiperc.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o hipercdecode.o hipercdecode.c
cc -O2 -Wall hipercdecode.o jbig.o jbig_ar.o -o hipercdecode
cc -O2 -Wall -c -o foo2hbpl2.o foo2hbpl2.c
cc -O2 -Wall -o foo2hbpl2 foo2hbpl2.o jbig.o jbig_ar.o
cc -O2 -Wall -c -o hbpldecode.o hbpldecode.c
cc -O2 -Wall hbpldecode.o jbig.o jbig_ar.o -o hbpldecode
cc -O2 -Wall -c -o gipddecode.o gipddecode.c
cc -O2 -Wall gipddecode.o jbig.o jbig_ar.o -o gipddecode
cc -O2 -Wall -I/usr/
cc -O2 -Wall -L/usr/local/lib command2foo2lav
command2foo2lav
cc -O2 -Wall usb_printerid.c -o usb_printerid
[ ! -f foo2zjs-wrapper ] || chmod +w foo2zjs-wrapper
sed < foo2zjs-wrapper.in > foo2zjs-wrapper \
-e 's@^PREFIX=
chmod 555 foo2zjs-wrapper
[ ! -f foo2oak-wrapper ] || chmod +w foo2oak-wrapper
sed < foo2oak-wrapper.in > foo2oak-wrapper \
-e 's@^PREFIX=
chmod 555 foo2oak-wrapper
[ ! -f foo2hp2600-wrapper ] || chmod +w foo2hp2600-wrapper
sed < foo2hp2600-
-e 's@^PREFIX=
chmod 555 foo2hp2600-wrapper
[ ! -f foo2xqx-wrapper ] || chmod +w foo2xqx-wrapper
sed < foo2xqx-wrapper.in > foo2xqx-wrapper \
-e 's@^PREFIX=
chmod 555 foo2xqx-wrapper
[ ! -f foo2lava-wrapper ] || chmod +w foo2lava-wrapper
sed < foo2lava-wrapper.in > foo2lava-wrapper \
-e 's@^PREFIX=
chmod 555 foo2lava-wrapper
[ ! -f foo2qpdl-wrapper ] || chmod +w foo2qpdl-wrapper
sed < foo2qpdl-wrapper.in > foo2qpdl-wrapper \
-e 's@^PREFIX=
chmod 555 foo2qpdl-wrapper
[ ! -f foo2slx-wrapper ] || chmod +w foo2slx-wrapper
sed < foo2slx-wrapper.in > foo2slx-wrapper \
-e 's@^PREFIX=
chmod 555 foo2slx-wrapper
[ ! -f foo2hiperc-wrapper ] || chmod +w foo2hiperc-wrapper
sed < foo2hiperc-
-e 's@^PREFIX=
chmod 555 foo2hiperc-wrapper
[ ! -f foo2hbpl2-wrapper ] || chmod +w foo2hbpl2-wrapper
sed < foo2hbpl2-
-e 's@^PREFIX=
chmod 555 foo2hbpl2-wrapper
cat foo2zjs-pstops.sh >foo2zjs-pstops
chmod a+x foo2zjs-pstops
cat printer-profile.sh >printer-profile
chmod a+x printer-profile
[ ! -f getweb ] || chmod +w getweb
sed < getweb.in > getweb \
-e "s@\${URLZJS}@http://
-e 's@^PREFIX=
chmod 555 getweb
cd icc2ps; make all
make[1]: Entering directory '/tmp/foo2zjs/
cc -O3 icc2ps.c xgetopt.c cmscam97.c cmscnvrt.c cmserr.c cmsgamma.c
cmsgmt.c cmsintrp.c cmsio1.c cmslut.c cmsmatsh.c cmsmtrx.c cmsnamed.c
cmspack.c cmspcs.c cmsps2.c cmssamp.c cmswtpnt.c cmsxform.c cmsio0.c
cmsvirt.c -lm -o foo2zjs-icc2ps
rm -f foo2zjs-icc2ps.1
MODver=; \
../includer-man -v DEF1= foo2zjs-icc2ps.1in | sed > foo2zjs-icc2ps.1 \
-e "s@\${URLOAK}@@" \
-e "s@\${URLZJS}@@" \
-e "s@\${URLHP}@@" \
-e "s@\${URLXQX}@@" \
-e "s@\${URLLAVA}@@" \
-e "s@\${URLQPDL}@@" \
-e "s@\${URLSLX}@@" \
-e "s@\${URLHC}@@" \
-e "s/\${MODver}
chmod -w foo2zjs-icc2ps.1
make[1]: Leaving directory '/tmp/foo2zjs/
rm -f foo2zjs-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2zjs-
MODver=0.0; \
./includer-man -v DEF1= foo2zjs-wrapper.1in | sed > foo2zjs-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2zjs-wrapper.1
rm -f foo2zjs.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2zjs.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2zjs.1in | sed > foo2zjs.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2zjs.1
rm -f zjsdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime zjsdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= zjsdecode.1in | sed > zjsdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w zjsdecode.1
rm -f foo2oak-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2oak-
MODver=0.0; \
./includer-man -v DEF1= foo2oak-wrapper.1in | sed > foo2oak-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2oak-wrapper.1
rm -f foo2oak.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2oak.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2oak.1in | sed > foo2oak.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2oak.1
rm -f oakdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime oakdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= oakdecode.1in | sed > oakdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w oakdecode.1
rm -f foo2hp2600-
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hp2600-
MODver=0.0; \
./includer-man -v DEF1= foo2hp2600-
foo2hp2600-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hp2600-
rm -f foo2hp.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hp.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2hp.1in | sed > foo2hp.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hp.1
rm -f foo2xqx-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2xqx-
MODver=0.0; \
./includer-man -v DEF1= foo2xqx-wrapper.1in | sed > foo2xqx-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2xqx-wrapper.1
rm -f foo2xqx.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2xqx.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2xqx.1in | sed > foo2xqx.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2xqx.1
rm -f xqxdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime xqxdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= xqxdecode.1in | sed > xqxdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w xqxdecode.1
rm -f foo2lava-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2lava-
MODver=0.0; \
./includer-man -v DEF1= foo2lava-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2lava-wrapper.1
rm -f foo2lava.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2lava.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2lava.1in | sed > foo2lava.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2lava.1
rm -f lavadecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime lavadecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= lavadecode.1in | sed > lavadecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w lavadecode.1
rm -f opldecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime opldecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= opldecode.1in | sed > opldecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w opldecode.1
rm -f foo2qpdl-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2qpdl-
MODver=0.0; \
./includer-man -v DEF1= foo2qpdl-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2qpdl-wrapper.1
rm -f foo2qpdl.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2qpdl.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2qpdl.1in | sed > foo2qpdl.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2qpdl.1
rm -f qpdldecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime qpdldecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= qpdldecode.1in | sed > qpdldecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w qpdldecode.1
rm -f foo2slx-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2slx-
MODver=0.0; \
./includer-man -v DEF1= foo2slx-wrapper.1in | sed > foo2slx-wrapper.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2slx-wrapper.1
rm -f foo2slx.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2slx.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2slx.1in | sed > foo2slx.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2slx.1
rm -f slxdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime slxdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= slxdecode.1in | sed > slxdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w slxdecode.1
rm -f foo2hiperc-
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hiperc-
MODver=0.0; \
./includer-man -v DEF1= foo2hiperc-
foo2hiperc-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hiperc-
rm -f foo2hiperc.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hiperc.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2hiperc.1in | sed > foo2hiperc.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hiperc.1
rm -f hipercdecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime hipercdecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= hipercdecode.1in | sed > hipercdecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w hipercdecode.1
rm -f foo2hbpl2-wrapper.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hbpl2-
MODver=0.0; \
./includer-man -v DEF1= foo2hbpl2-
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hbpl2-wrapper.1
rm -f foo2hbpl2.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2hbpl2.1in`; \
MODver=0.0; \
./includer-man -v DEF1= foo2hbpl2.1in | sed > foo2hbpl2.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2hbpl2.1
rm -f hbpldecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime hbpldecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= hbpldecode.1in | sed > hbpldecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w hbpldecode.1
rm -f gipddecode.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime gipddecode.1in`; \
MODver=0.0; \
./includer-man -v DEF1= gipddecode.1in | sed > gipddecode.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w gipddecode.1
rm -f foo2zjs-pstops.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime foo2zjs-
MODver=0.0; \
./includer-man -v DEF1= foo2zjs-pstops.1in | sed > foo2zjs-pstops.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w foo2zjs-pstops.1
rm -f arm2hpdl.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime arm2hpdl.1in`; \
MODver=0.0; \
./includer-man -v DEF1= arm2hpdl.1in | sed > arm2hpdl.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w arm2hpdl.1
rm -f usb_printerid.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime usb_printerid.1in`; \
MODver=0.0; \
./includer-man -v DEF1= usb_printerid.1in | sed > usb_printerid.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w usb_printerid.1
rm -f printer-profile.1
modtime() { date -d "1/1/1970 utc + `stat -t $1 | cut -f14 -d' '`
seconds" "+%a %b %d %T %Y"; }; \
MODpage=`modtime printer-
MODver=0.0; \
./includer-man -v DEF1= printer-profile.1in | sed > printer-profile.1 \
-e "s@\${URLOAK}@http://
-e "s@\${URLZJS}@http://
-e "s@\${URLHP}@http://
-e "s@\${URLXQX}@http://
-e "s@\${URLLAVA}@http://
-e "s@\${URLQPDL}@http://
-e "s@\${URLSLX}@http://
-e "s@\${URLHC}@http://
-e "s@\${URLHBPL}@http://
-e "s/\${MODpage}
-e "s/\${MODver}
chmod -w printer-profile.1
cd icc2ps; make man
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'man'.
make[1]: Leaving directory '/tmp/foo2zjs/
cd osx-hotplug; make man
make[1]: Entering directory '/tmp/foo2zjs/
rm -f osx-hplj-hotplug.1
MODver=; \
../includer-man -v DEF1= osx-hplj-
-e "s@\${URLOAK}@@" \
-e "s@\${URLZJS}@@" \
-e "s@\${URLHP}@@" \
-e "s@\${URLXQX}@@" \
-e "s@\${URLLAVA}@@" \
-e "s@\${URLQPDL}@@" \
-e "s@\${URLSLX}@@" \
-e "s@\${URLHC}@@" \
-e "s/\${MODver}
chmod -w osx-hplj-hotplug.1
make[1]: Leaving directory '/tmp/foo2zjs/
groff -t -man \
`ls foo2zjs-wrapper.1 foo2zjs.1 zjsdecode.1 foo2oak-wrapper.1
foo2oak.1 oakdecode.1 foo2hp2600-
foo2xqx.1 xqxdecode.1 foo2lava-wrapper.1 foo2lava.1 lavadecode.1
opldecode.1 foo2qpdl-wrapper.1 foo2qpdl.1 qpdldecode.1 foo2slx-wrapper.1
foo2slx.1 slxdecode.1 foo2hiperc-
foo2hbpl2-wrapper.1 foo2hbpl2.1 hbpldecode.1 gipddecode.1
foo2zjs-pstops.1 arm2hpdl.1 usb_printerid.1 printer-profile.1 \
icc2ps/
osx-
| sort` \
| ps2pdf - manual.pdf
It is possible that certain products which can be built using this
software module might form inventions protected by patent rights in
some countries (e.g., by patents about arithmetic coding algorithms
owned by IBM and AT&T in the USA). Provision of this software by the
author does NOT include any licences for any patents. In those
countries where a patent licence is required for certain applications
of this software module, you will have to obtain such a licence
yourself.
barry@barry-
firmware file
gzip: stdin: not in gzip format
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors
(c) Copyright Hewlett-Packard 2001
barry@barry-
#
# Dependencies...
#
# ... OK!
#
cd icc2ps; make all
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/tmp/foo2zjs/
cd icc2ps; make man
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'man'.
make[1]: Leaving directory '/tmp/foo2zjs/
cd osx-hotplug; make man
make[1]: Entering directory '/tmp/foo2zjs/
make[1]: Nothing to be done for 'man'.
make[1]: Leaving directory '/tmp/foo2zjs/
It is possible that certain products which can be built using this
software module might form inventions protected by patent rights in
some countries (e.g., by patents about arithmetic coding algorithms
owned by IBM and AT&T in the USA). Provision of this software by the
author does NOT include any licences for any patents. In those
countries where a patent licence is required for certain applications
of this software module, you will have to obtain such a licence
yourself.
#
# Installation Dependencies...
#
# ... OK!
#
#
# Install driver, wrapper, and development tools
#
install -d /usr/bin
install -c foo2zjs zjsdecode arm2hpdl foo2hp foo2xqx xqxdecode foo2lava
lavadecode foo2qpdl qpdldecode opldecode foo2oak oakdecode foo2slx
slxdecode foo2hiperc hipercdecode foo2hbpl2 hbpldecode gipddecode
command2foo2lav
foo2xqx-wrapper foo2lava-wrapper foo2qpdl-wrapper foo2slx-wrapper
foo2hiperc-wrapper foo2hbpl2-wrapper foo2zjs-pstops printer-profile
/usr/bin/
if [ " usb_printerid" != "" ]; then \
install -d /bin/; \
install -c usb_printerid /bin/; \
fi
#
# Install gamma correction files. These are just templates,
# and don't actually do anything right now. If anybody wants
# to tune them or point me at a process for doing that, please...
#
install -d /usr/share/foo2zjs/
install -c -m 644 gamma.ps /usr/share/foo2zjs/
install -c -m 644 gamma-lookup.ps /usr/share/foo2zjs/
install -d /usr/share/foo2oak/
install -d /usr/share/foo2hp/
install -d /usr/share/foo2xqx/
install -d /usr/share/
install -d /usr/share/
#
# Install ICM to Postscript file conversion utility
#
cd icc2ps; make PREFIX=/usr install
make[1]: Entering directory '/tmp/foo2zjs/
install -c foo2zjs-icc2ps /usr/bin
make[1]: Leaving directory '/tmp/foo2zjs/
#
# Install extra files (ICM and firmware), if any exist here.
#
# Get files from the printer manufacturer, i.e. www.minolta-
# or use the "./getweb" convenience script.
#
install -d /usr/share/foo2zjs/
# foo2zjs ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in DL*.icm CP*.icm km2430*.icm hp-cp1025*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2zjs Firmware files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in sihp1*.img; do \
if [ -f $i ]; then \
base=`basename $i .img`; \
./arm2hpdl $i >$base.dl; \
install -c -m 644 $base.dl /usr/share/
fi; \
done
# foo2xqx Firmware files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in sihpP*.img; do \
if [ -f $i ]; then \
base=`basename $i .img`; \
./arm2hpdl $i >$base.dl; \
install -c -m 644 $base.dl /usr/share/
fi; \
done
# foo2oak ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in hpclj2[56]*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2hp ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in hpclj26*.icm km2430*.icm hp1215*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2lava ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in km-1600*.icm km2530*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2qpdl ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in samclp*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2slx ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in lex*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2hiperc ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in OK*.icm C3400*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
# foo2hbpl ICM files (if any)
install -oroot -glp -m 775 -d /usr/share/
for i in hbpl*.icm; do \
if [ -f $i ]; then \
install -c -m 644 $i /usr/share/
fi; \
done
#
# Install prebuilt CRD files (from m2300w project)
#
install -d /usr/share/foo2zjs/
install -oroot -glp -m 775 -d /usr/share/
for i in crd/zjs/*.*; do \
install -c -m 644 $i /usr/share/
done
#
# Install prebuilt CRD files for CLP-300/CLP-600
#
install -d /usr/share/
install -oroot -glp -m 775 -d /usr/share/
for i in crd/qpdl/*cms* crd/qpdl/*.ps; do \
install -c -m 644 $i /usr/share/
done
#
# Remove obsolete foomatic database files from previous versions
#
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
rm -f /usr/share/
#
# Install current database files
#
***
*** WARNING! You don't have directory /usr/share/
*** If you want support for foomatic printer configuration,
*** then you will have to manually install these files...
***
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
foomatic-
***
*** ... wherever foomatic is stashed on your machine.
***
#
# Clear foomatic cache and rebuild database if needed
#
rm -rf /var/cache/
rm -f /var/cache/
if [ -d /var/cache/
cd /var/cache/
foomatic-
fi
#
# Install PPD files for CUPS
#
export PATH=$PATH:`pwd`:; \
if [ -x /usr/sbin/ppdmgr -a -s /var/lp/
install -glp -d /var/lp/ppd/user; \
cd PPD; \
for ppd in *.ppd; do \
manuf=`echo "$ppd" | sed 's/-.*//'`; \
install -glp -d /var/lp/
modify-ppd <$ppd | gzip > /var/lp/
chmod 664 /var/lp/
done; \
ppdmgr -u; \
elif [ -d /usr/share/ppd ]; then \
find /usr/share/ppd -name '*foo2zjs*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2hp*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2xqx*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2lava*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2qpdl*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2slx*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2hiperc*' | xargs rm -rf; \
find /usr/share/ppd -name '*foo2hbpl*' | xargs rm -rf; \
[ -d /usr/share/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip > /usr/share/
chmod 664 /usr/share/
done; \
fi
#
export PATH=$PATH:`pwd`:; \
if [ -d /usr/share/
rm -f /usr/share/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip > /usr/share/
chmod 664 /usr/share/
done; \
elif [ -d /usr/local/
rm -f /usr/local/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip > /usr/local/
chmod 664 /usr/local/
done; \
elif [ -d /Library/
rm -f /Library/
cd PPD; \
for ppd in *.ppd; do \
modify-ppd <$ppd | gzip >
/Library/
chmod 664 /Library/
done; \
fi
#
# Install GUI
#
install -c -m 644 hplj1020_icon.gif /usr/share/foo2zjs
install -c -m 755 hplj10xx_gui.tcl /usr/share/foo2zjs
#
# Install GNOME desktop
#
if [ -d /usr/share/
install -c -m 644 hplj1020.desktop /usr/share/
fi
if [ -d /usr/share/
install -c -m 644 hplj1020.desktop /usr/share/
fi
if [ -d /usr/share/pixmaps ]; then \
install -c -m 644 hplj1020_icon.png /usr/share/pixmaps; \
fi
if [ "/usr/lib/cups" != "" ]; then \
ln -sf /usr/bin/
fi
#
# Install manual pages
#
install -d -m 755 /usr/share/man
install -d -m 755 /usr/share/
install -c -m 644 foo2zjs.1 /usr/share/
install -c -m 644 foo2zjs-wrapper.1 /usr/share/
install -c -m 644 zjsdecode.1 /usr/share/
install -c -m 644 foo2oak.1 /usr/share/
install -c -m 644 foo2oak-wrapper.1 /usr/share/
install -c -m 644 oakdecode.1 /usr/share/
install -c -m 644 foo2hp.1 /usr/share/
install -c -m 644 foo2hp2600-
install -c -m 644 foo2xqx.1 /usr/share/
install -c -m 644 foo2xqx-wrapper.1 /usr/share/
install -c -m 644 xqxdecode.1 /usr/share/
install -c -m 644 foo2lava.1 /usr/share/
install -c -m 644 foo2lava-wrapper.1 /usr/share/
install -c -m 644 lavadecode.1 /usr/share/
install -c -m 644 opldecode.1 /usr/share/
install -c -m 644 foo2qpdl.1 /usr/share/
install -c -m 644 foo2qpdl-wrapper.1 /usr/share/
install -c -m 644 qpdldecode.1 /usr/share/
install -c -m 644 foo2slx.1 /usr/share/
install -c -m 644 foo2slx-wrapper.1 /usr/share/
install -c -m 644 slxdecode.1 /usr/share/
install -c -m 644 foo2hiperc.1 /usr/share/
install -c -m 644 foo2hiperc-
install -c -m 644 hipercdecode.1 /usr/share/
install -c -m 644 foo2hbpl2.1 /usr/share/
install -c -m 644 foo2hbpl2-wrapper.1 /usr/share/
install -c -m 644 hbpldecode.1 /usr/share/
install -c -m 644 gipddecode.1 /usr/share/
install -c -m 644 foo2zjs-pstops.1 /usr/share/
install -c -m 644 arm2hpdl.1 /usr/share/
install -c -m 644 usb_printerid.1 /usr/share/
install -c -m 644 printer-profile.1 /usr/share/
cd icc2ps; make install-man
make[1]: Entering directory '/tmp/foo2zjs/
install -d -m 755 /usr/share/man
install -d -m 755 /usr/share/
install -c -m 644 foo2zjs-icc2ps.1 /usr/share/
make[1]: Leaving directory '/tmp/foo2zjs/
#
# Install documentation
#
install -d -m 755 /usr/share/
install -c -m 644 manual.pdf /usr/share/
install -c -m 644 COPYING /usr/share/
install -c -m 644 INSTALL /usr/share/
install -c -m 644 INSTALL.osx /usr/share/
install -c -m 644 README /usr/share/
install -c -m 644 ChangeLog /usr/share/
#
# If you use CUPS, then restart the spooler:
# make cups
#
# Now use your printer configuration GUI to create a new printer.
#
# On Redhat 7.2/7.3/8.0/9.0 and Fedora Core 1-5, run "printconf-gui".
# On Fedora 6/7/8/9/10/11/12, run "system-
# On Mandrake, run "printerdrake"
# On Suse 9.x/10.x/11.x, run "yast"
# On Ubuntu 5.10/6.
# On Ubuntu 7.10/8.x/9.x, run "system-
barry@barry-
#
# Hotplug Installation Dependencies...
#
# ... OK!
#
#
# remove HPLIP (proprietary) files and install our version
#
if [ -d /etc/udev/rules.d ]; then \
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /etc/udev/
rm -f /lib/udev/
rm -f /lib/udev/
rm -f /lib/udev/
if [ -x /sbin/udevd ]; then \
version=
elif [ -x /usr/lib/udev/udevd ]; then \
version=
elif [ -x /usr/lib/
version=
fi; \
if [ "$version" = "" ]; then version=0; fi; \
echo "*** udev version $version"; \
if [ "$version" -lt 148 ]; then \
install -c -m 644 hplj10xx.rules.old
/etc/udev/
else \
install -c -m 644 hplj10xx.rules /etc/udev/
fi \
fi
*** udev version 219
if [ -d /etc/devd ]; then \
install -c -m 644 hplj10xx.conf /etc/devd/; \
fi
[ -d /etc/hotplug/usb ] || install -d -m 755 /etc/hotplug/usb/
install -c -m 755 hplj1000 /etc/hotplug/usb/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
ln -sf /etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
/etc/hotplug/
# modprobe usblp
/etc/hotplug/
barry@barry-
barry@barry-
May 7 09:29:04 barry-desktop /etc/hotplug/
loading HP LaserJet 1000 firmware
/usr/share/
May 7 09:29:05 barry-desktop /etc/hotplug/
download successful.
May 7 09:29:26 barry-desktop AptDaemon: INFO: Quitting due to inactivity
May 7 09:29:26 barry-desktop AptDaemon: INFO: Quitting was requested
May 7 09:29:26 barry-desktop org.debian.
[INFO]: Quitting due to inactivity
May 7 09:29:26 barry-desktop org.debian.
[INFO]: Quitting was requested
May 7 09:29:42 barry-desktop dbus[715]: [system] Activating via
systemd: service name='org.
unit='dbus-
May 7 09:29:42 barry-desktop systemd[1]: Starting Hostname Service...
May 7 09:29:42 barry-desktop dbus[715]: [system] Successfully activated
service 'org.freedeskto
May 7 09:29:42 barry-desktop systemd[1]: Started Hostname Service.
barry@barry-
BM
_______
On 06/05/15 20:13, Mark Rijckenberg wrote:
> Your question #266394 on Ubuntu changed:
> https:/
>
> Status: Open => Answered
>
> Mark Rijckenberg proposed the following answer:
> Your Terminal output shows this error:
>
> [ 0%] .......... .......... .......... .......... .......... [1162.5KB/s]
> [ 0%] ..........
> Connection 0 finished
>
> Downloaded 8310.0 kilobytes in 7 seconds. (1162.56 KB/s)
> barry@barry-
>
> gzip: stdin: not in gzip format
> tar: Child returned status 1
> tar: Error is not recoverable: exiting now
>
> gzip: foo2zjs.tar.gz: not in gzip format
>
> So the printer driver package foo2zjs.tar.gz was not fully downloaded,
> it seems....
>
> Maybe retry the whole driver installation procedure again?
>
|
Revision history for this message
|
#8 |
Have booted up Ubuntu, six hours after last message to you, printer is
now working (?). Lets hope it doesn't stop working again.
Barry
_______
On 06/05/15 20:13, Mark Rijckenberg wrote:
> Your question #266394 on Ubuntu changed:
> https:/
>
> Status: Open => Answered
>
> Mark Rijckenberg proposed the following answer:
> Your Terminal output shows this error:
>
> [ 0%] .......... .......... .......... .......... .......... [1162.5KB/s]
> [ 0%] ..........
> Connection 0 finished
>
> Downloaded 8310.0 kilobytes in 7 seconds. (1162.56 KB/s)
> barry@barry-
>
> gzip: stdin: not in gzip format
> tar: Child returned status 1
> tar: Error is not recoverable: exiting now
>
> gzip: foo2zjs.tar.gz: not in gzip format
>
> So the printer driver package foo2zjs.tar.gz was not fully downloaded,
> it seems....
>
> Maybe retry the whole driver installation procedure again?
>
|
Revision history for this message
|
#9 |
Please set the thread status to "solved", if the issue is now solved.
Thanks.
|
Revision history for this message
|
#10 |
Thanks Mark Rijckenberg, that solved my question.
