usblp0: removed HP Deskjet 1660

Asked by Félix on 2011-04-06

CUPS adds the printer but cannot print.

running hp-check -r, I get

HP Linux Imaging and Printing System (ver. 3.10.6)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball
(.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm,
etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above
cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux home-desktop 2.6.35-28-generic #50-Ubuntu SMP Fri Mar 18 19:00:26 UTC 2011 i686 GNU/Linux

Distribution:
ubuntu 10.10

Checking Python version...
OK, version 2.6.6 installed

Checking PyQt 4.x version...
OK, version 4.7.4 installed.

Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------
| RUNTIME DEPENDENCIES |
------------------------

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.10.6 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.6.15
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = Deskjet-D1600-series
working_dir = .
device_uri = "hp:/usb/Deskjet_D1600_series?serial=CN9AD3B0DV05CT"

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[installation]
version = 3.10.6.15
date_time = 04/06/2011 11:47:38

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  ------------------------------------------ -----------------------
  hp:/usb/Deskjet_D1600_series?serial=CN9AD3 HP Deskjet D1600 series
  B0DV05CT

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Deskjet-D1600-series
--------------------
Type: Printer
Device URI: hp:/usb/Deskjet_D1600_series?serial=CN9AD3B0DV05CT
PPD: /etc/cups/ppd/Deskjet-D1600-series.ppd
PPD Description: HP Deskjet d1600 Series hpijs, 3.10.6
Printer ready to printr Deskjet-D1600-series is idle. enabled since Wed 06 Apr 2011 11:46:07 AM VET
Communication status: Good

HP-Officejet-j6400
------------------
Type: Unknown
Device URI: socket://192.168.2.14:9100
PPD: /etc/cups/ppd/HP-Officejet-j6400.ppd
PPD Description: HP Officejet j6400 Series hpijs, 3.10.6
Printer status: printer HP-Officejet-j6400 is idle. enabled since Tue 05 Apr 2011 03:28:07 PM VET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x7f11 at 001:004:
    Device URI: hp:/usb/Deskjet_D1600_series?serial=CN9AD3B0DV05CT
    Device node: /dev/bus/usb/001/004
    Mode: 0664

---------------
| USER GROUPS |
---------------

vboxusers adm dialout fax cdrom floppy tape audio dip video plugdev scanner fuse lpadmin admin netdev powerdev sambashare usbuser hamachi

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 2 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

lsusb --vv

Bus 001 Device 004: ID 03f0:7f11 Hewlett-Packard
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  idVendor 0x03f0 Hewlett-Packard
  idProduct 0x7f11
  bcdDevice 1.00
  iManufacturer 1 HP
  iProduct 2 Deskjet D1600 series
  iSerial 3 CN9AD3B0DV05CT
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 78
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
      Self Powered
    MaxPower 2mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 7 Printer
      bInterfaceSubClass 1 Printer
      bInterfaceProtocol 2 Bidirectional
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x08 EP 8 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x89 EP 9 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x06 EP 6 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x87 EP 7 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 1
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 212
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x06 EP 6 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x87 EP 7 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0200 1x 512 bytes
        bInterval 0
Device Qualifier (for other device speed):
  bLength 10
  bDescriptorType 6
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  bNumConfigurations 1
Device Status: 0x0001
  Self Powered

lpstat -a
Deskjet-D1600-series accepting requests since Wed 06 Apr 2011 11:46:07 AM VET

lpstat -v
device for Deskjet-D1600-series: hp:/usb/Deskjet_D1600_series?serial=CN9AD3B0DV05CT

I'm using

Linux home-desktop 2.6.35-28-generic #50-Ubuntu SMP Fri Mar 18 19:00:26 UTC 2011 i686 GNU/Linux

ubuntu 10.10

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu hplip Edit question
Assignee:
No assignee Edit question
Solved by:
Félix
Solved:
2011-04-06
Last query:
2011-04-06
Last reply:
Félix (felixcriv) said : #1

This is what I get from dmesg when I turn the printer on:

Apr 6 11:59:23 home-desktop kernel: [ 3785.644704] usb 1-7: new high speed USB device using ehci_hcd and address 38
Apr 6 11:59:23 home-desktop kernel: [ 3785.780558] usblp0: USB Bidirectional printer dev 38 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7F11
Apr 6 11:59:24 home-desktop kernel: [ 3786.857018] usb 1-7: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
Apr 6 11:59:41 home-desktop kernel: [ 3804.211612] usblp0: removed

Félix (felixcriv) said : #2

I've resolved installing hplip 3.11.3a

VINODREDDY (vinod-reddy) said : #3

I want to unsubscribe it, but I am not able to see unsubscribe field in the screen. Please help me, don't know why my name is in the list.

Thanks and Regards
Vinod Reddy
FinAcct Process Mgmt-GBS
email:<email address hidden>|Mobile:404-409-3455