problema teclado mouse inalambrico

Asked by gabriel dzul on 2010-06-26

ya he instalado el nuevo ubuntu 10.4, me logueo y despues de un momento el teclado y el mouse no responden. no se si se deba a que ambos son inalambricos y responden a un receptor que se conecta via usb. no se si se necesiten instalar controladores o algo, el caso es que no puedo hacerlo ya que pasan unos 10 minutos y se me conjela el ordenador.este problema lo tuve incluso durante la instalacion, de hecho tuve que reiniciar el ordenador como 10 veces para poder instalar el ubuntu. tengo windows xp y me funciona perfectamente, no se a que se deba mi problema.
 gracias de antemano por su ayuda.

Question information

Language:
Spanish Edit question
Status:
Answered
For:
Ubuntu hal Edit question
Assignee:
No assignee Edit question
Last query:
2010-07-02
Last reply:
2010-07-03
Jorge Suárez de Lis (ys) said : #1

Seguramente se deba a algún problema de algún controlador. Dinos el modelo exacto (no la serie, que puede haber variaciones) de ordenador que tienes.

gabriel dzul (pegaso-181) said : #2

es una HP PAVILION SLIMLINE S7640LA

gabriel dzul (pegaso-181) said : #3

es una HP PAVILION SLIMLINE S7640LA

Jorge Suárez de Lis (ys) said : #4

Vale, se me ocurren dos cosas:

- Que sea del driver de la tarjeta gráfica, una ATI RADEON X200 MOBILE.
- Que sea del driver del adaptador wifi, que no dicen cuál es.

Para descartar (o confirmar) que sea del wifi, apaga el adaptador si tienes un interruptor para ello, o haz clic derecho sobre el icono de la wifi y desmarca la opción "Red inalámbrica". Trabaja un rato. ¿Se sigue atascando?

Para descartar (o confirmar) que sea de la gráfica, inicia en modo recuperación eligiendo la opción "failsafeX". Puede que obtengas una resolución de pantalla incorrecta y notes que el vídeo va más lento. Aún así, utiliza la wifi sin miedo e intenta trabajar normal. ¿Se sigue atascando?

En función de los resultados que obtengas ya vemos qué podemos hacer al respecto, si es que llegamos a alguna conclusión claro.

gabriel dzul (pegaso-181) said : #5

cuando entro a modo recuperacion y la opcion failsafex se deja de atorar, de hecho no da ningun problema.Trabaje cerca de 2 horas sin que se congelara el teclado.pero cuando intento entrar normalmente se aora a las 5 minutos.

Jorge Suárez de Lis (ys) said : #6

Vale, entonces podemos echarle la culpa al driver de la tarjeta gráfica. Supongo que estás utilizando el driver libre de ATI, que viene instalado por defecto. Vete a Sistema > Administración > Controladores de hardware, y comprueba si te sugiere la instalación de un driver privativo para tu tarjeta de vídeo. Si es así, instálalo. Sino, avisa y miramos las opciones que tienes.

gabriel dzul (pegaso-181) said : #7

no, no me da la opcion de istalar el controlador.no me da ninguna opcion.
 gracias por su paciencia y ayuda, espero que se pueda soluciona el problema

Jorge Suárez de Lis (ys) said : #8

Vale, he mirado en la web de AMD y parece que ya no da soporte a este chip integrado en el chipset de la placa, así que la única opción es quedarte con los drivers que vienen (con esa versión exacta o no) e intentar arreglar el problema.

He encontrado una serie de problemas con este chip. Para descartar algunas cosas, vete a sistema » administración » visor de archivos de sucesos. Selecciona el dmesg y copia y pega todo aquí para que pueda echarle un vistazo.

Mientras no te contesto, actualiza el sistema (arrancando con el failsafeX para que no se quede atascado a medias claro). A mucha gente parece solucionarle los problemas. A otros no, pero bueno.

gabriel dzul (pegaso-181) said : #9

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3bef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-F7FFF uncachable
[ 0.000000] F8000-FBFFF write-protect
[ 0.000000] FC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03C000000 mask FFC000000 write-combining
[ 0.000000] 2 base 03BF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] modified: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[ 0.000000] modified: 000000003bef3000 - 000000003bf00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 2c2ec000 - 2cf736b0
[ 0.000000] ACPI: RSDP 000f7900 00014 (v00 HP-CPC)
[ 0.000000] ACPI: RSDT 3bef3040 00038 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3bef30c0 00074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3bef3180 0458B (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3bef0000 00040
[ 0.000000] ACPI: MCFG 3bef7840 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 3bef7780 00068 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 3bef78c0 001E0 (v01 HP-CPC Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 3bef7d50 00167 (v01 HP-CPC CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 70MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [002c2ec000 - 002cf736b0] RAMDISK ==> [002c2ec000 - 002cf736b0]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd1bc] BRK ==> [00008da000 - 00008dd1bc]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f5d50] f5d50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003bef0
[ 0.000000] On node 0 totalpages: 245375
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 142 pages used for memmap
[ 0.000000] HighMem zone: 18020 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x83
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3bf00000 (gap: 3bf00000:a4100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243457
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=bb50a72b-63e8-43fe-a1ef-2c2d3208f04d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4909440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003bef0)
[ 0.000000] Memory: 946748k/981952k available (4673k kernel code, 34312k reserved, 2122k data, 656k init, 72648k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.923 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.84 BogoMIPS (lpj=6399692)
[ 0.004028] Security Framework initialized
[ 0.004055] AppArmor: AppArmor initialized
[ 0.004064] Mount-cache hash table entries: 512
[ 0.004219] Initializing cgroup subsys ns
[ 0.004224] Initializing cgroup subsys cpuacct
[ 0.004229] Initializing cgroup subsys memory
[ 0.004239] Initializing cgroup subsys devices
[ 0.004242] Initializing cgroup subsys freezer
[ 0.004246] Initializing cgroup subsys net_cls
[ 0.004272] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004275] CPU: L2 cache: 2048K
[ 0.004279] CPU: Physical Processor ID: 0
[ 0.004282] CPU: Processor Core ID: 0
[ 0.004287] mce: CPU supports 6 MCE banks
[ 0.004300] CPU0: Thermal monitoring enabled (TM1)
[ 0.004305] using mwait in idle threads.
[ 0.004313] Performance Events: no PMU driver, software events only.
[ 0.004320] Checking 'hlt' instruction... OK.
[ 0.024065] ACPI: Core revision 20090903
[ 0.036011] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036019] ftrace: allocating 21771 entries in 43 pages
[ 0.040088] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040451] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.081081] CPU0: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.168136] CPU1: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 0.168154] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172026] Brought up 2 CPUs
[ 0.172030] Total of 2 processors activated (6400.22 BogoMIPS).
[ 0.172657] CPU0 attaching sched-domain:
[ 0.172662] domain 0: span 0-1 level MC
[ 0.172666] groups: 0 1
[ 0.172675] CPU1 attaching sched-domain:
[ 0.172677] domain 0: span 0-1 level MC
[ 0.172681] groups: 1 0
[ 0.172832] devtmpfs: initialized
[ 0.172832] regulator: core version 0.5
[ 0.172832] Time: 8:34:13 Date: 06/28/10
[ 0.172832] NET: Registered protocol family 16
[ 0.172832] Trying to unpack rootfs image as initramfs...
[ 0.172832] EISA bus registered
[ 0.172832] ACPI: bus type pci registered
[ 0.172832] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.172832] PCI: MCFG area at e0000000 reserved in E820
[ 0.172832] PCI: Using MMCONFIG for extended config space
[ 0.172832] PCI: Using configuration type 1 for base access
[ 0.172832] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.172832] mtrr: probably your BIOS does not setup all CPUs.
[ 0.172832] mtrr: corrected configuration.
[ 0.176139] bio: create slab <bio-0> at 0
[ 0.177122] ACPI: EC: Look up EC in DSDT
[ 0.184888] ACPI: Interpreter enabled
[ 0.184902] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.184938] ACPI: Using IOAPIC for interrupt routing
[ 0.190309] ACPI: No dock devices found.
[ 0.190460] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.190543] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.190702] pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
[ 0.190714] pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.190726] pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.190737] pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.190748] pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.190760] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
[ 0.190772] pci 0000:00:12.0: reg 30 32bit mmio pref: [0xfdf80000-0xfdffffff]
[ 0.190815] pci 0000:00:12.0: supports D1 D2
[ 0.190880] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[ 0.191025] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.191175] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.191274] pci 0000:00:13.2: supports D1 D2
[ 0.191277] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.191284] pci 0000:00:13.2: PME# disabled
[ 0.191337] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[ 0.191349] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02b000-0xfe02b3ff]
[ 0.191396] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.191455] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.191467] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.191478] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.191489] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.191501] pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
[ 0.191640] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.191722] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.191729] pci 0000:00:14.2: PME# disabled
[ 0.191954] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.191961] pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff]
[ 0.191968] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.191998] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.192027] pci 0000:01:05.0: supports D1 D2
[ 0.192062] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.192067] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.192073] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.192148] pci 0000:02:02.0: reg 10 io port: [0xde00-0xdeff]
[ 0.192161] pci 0000:02:02.0: reg 14 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.192248] pci 0000:02:02.0: supports D1 D2
[ 0.192251] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.192259] pci 0000:02:02.0: PME# disabled
[ 0.192337] pci 0000:02:06.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.192432] pci 0000:02:06.0: supports D1 D2
[ 0.192435] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.192445] pci 0000:02:06.0: PME# disabled
[ 0.192526] pci 0000:00:14.4: transparent bridge
[ 0.192538] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.192545] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.192553] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.192570] pci_bus 0000:00: on NUMA node 0
[ 0.192577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.192945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.193124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.207041] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.207191] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.207334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.207476] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.207625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
[ 0.207766] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.207921] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11), disabled.
[ 0.208071] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.208248] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208253] vgaarb: loaded
[ 0.208456] SCSI subsystem initialized
[ 0.208617] libata version 3.00 loaded.
[ 0.208721] usbcore: registered new interface driver usbfs
[ 0.208739] usbcore: registered new interface driver hub
[ 0.208776] usbcore: registered new device driver usb
[ 0.209000] ACPI: WMI: Mapper loaded
[ 0.209003] PCI: Using ACPI for IRQ routing
[ 0.209018] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.209022] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.209230] NetLabel: Initializing
[ 0.209233] NetLabel: domain hash size = 128
[ 0.209235] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.209255] NetLabel: unlabeled traffic allowed by default
[ 0.209299] Switching to clocksource tsc
[ 0.211088] AppArmor: AppArmor Filesystem Enabled
[ 0.211112] pnp: PnP ACPI init
[ 0.211136] ACPI: bus type pnp registered
[ 0.213776] pnp 00:08: mem resource (0xcc000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.213782] pnp 00:08: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.213787] pnp 00:08: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.213792] pnp 00:08: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.213797] pnp 00:08: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.213802] pnp 00:08: mem resource (0x100000-0x3beeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.213887] pnp: PnP ACPI: found 9 devices
[ 0.213890] ACPI: ACPI bus type pnp unregistered
[ 0.213896] PnPBIOS: Disabled by ACPI PNP
[ 0.213922] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.213926] system 00:01: ioport range 0x40b-0x40b has been reserved
[ 0.213930] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.213935] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.213939] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.213943] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.213947] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.213951] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.213955] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.213959] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.213963] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.213974] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.213978] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.213982] system 00:06: ioport range 0x880-0x88f has been reserved
[ 0.213990] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.213999] system 00:08: iomem range 0x3bf00000-0x3bffffff could not be reserved
[ 0.214003] system 00:08: iomem range 0x3bef0000-0x3befffff could not be reserved
[ 0.214008] system 00:08: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.214012] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.214017] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.214021] system 00:08: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.248869] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.248876] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.248883] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff
[ 0.248888] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.248896] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.248902] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.248911] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff
[ 0.248918] pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff
[ 0.248952] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.248956] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.248960] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.248963] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.248967] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.248971] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.248975] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.248979] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.248982] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.248986] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.249051] NET: Registered protocol family 2
[ 0.249214] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.249834] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.251654] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.252767] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.252773] TCP reno registered
[ 0.252973] NET: Registered protocol family 1
[ 0.253004] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.338667] pci 0000:01:05.0: Boot video device
[ 0.339000] cpufreq-nforce2: No nForce2 chipset.
[ 0.339041] Scanning for low memory corruption every 60 seconds
[ 0.339217] audit: initializing netlink socket (disabled)
[ 0.339238] type=2000 audit(1277714050.338:1): initialized
[ 0.352392] highmem bounce pool size: 64 pages
[ 0.352400] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.354686] VFS: Disk quotas dquot_6.5.2
[ 0.354772] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.355641] fuse init (API version 7.13)
[ 0.355770] msgmni has been set to 1708
[ 0.356118] alg: No test for stdrng (krng)
[ 0.356205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.356209] io scheduler noop registered
[ 0.356212] io scheduler anticipatory registered
[ 0.356215] io scheduler deadline registered
[ 0.356270] io scheduler cfq registered (default)
[ 0.356423] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.356454] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.356617] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.356623] ACPI: Power Button [PWRB]
[ 0.356703] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.356707] ACPI: Power Button [PWRF]
[ 0.356773] fan PNP0C0B:00: registered as cooling_device0
[ 0.356781] ACPI: Fan [FAN] (on)
[ 0.357176] processor LNXCPU:00: registered as cooling_device1
[ 0.357455] ACPI: SSDT 3bef7cc0 00087 (v01 HP-CPC Cpu1Ist 00003000 INTL 20040311)
[ 0.357988] processor LNXCPU:01: registered as cooling_device2
[ 0.362009] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.362020] ACPI: Thermal Zone [THRM] (40 C)
[ 0.364126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.366013] brd: module loaded
[ 0.366689] loop: module loaded
[ 0.366813] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.367037] alloc irq_desc for 22 on node -1
[ 0.367040] alloc kstat_irqs on node -1
[ 0.367052] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.367165] alloc irq_desc for 16 on node -1
[ 0.367168] alloc kstat_irqs on node -1
[ 0.367173] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.367618] Fixed MDIO Bus: probed
[ 0.367679] PPP generic driver version 2.4.2
[ 0.367735] tun: Universal TUN/TAP device driver, 1.6
[ 0.367738] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.367857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.367881] alloc irq_desc for 19 on node -1
[ 0.367884] alloc kstat_irqs on node -1
[ 0.367889] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.367911] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.367959] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.368041] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
[ 0.368101] isapnp: Scanning for PnP cards...
[ 0.417372] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.417623] usb usb1: configuration #1 chosen from 1 choice
[ 0.417670] hub 1-0:1.0: USB hub found
[ 0.417697] hub 1-0:1.0: 8 ports detected
[ 0.417815] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.417856] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.417885] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.417940] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.417978] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
[ 0.509678] usb usb2: configuration #1 chosen from 1 choice
[ 0.509724] hub 2-0:1.0: USB hub found
[ 0.509748] hub 2-0:1.0: 4 ports detected
[ 0.509853] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.509882] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.509945] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.509986] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
[ 0.601693] usb usb3: configuration #1 chosen from 1 choice
[ 0.601741] hub 3-0:1.0: USB hub found
[ 0.601768] hub 3-0:1.0: 4 ports detected
[ 0.601874] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.602035] PNP: No PS/2 controller found. Probing ports directly.
[ 0.648015] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.648036] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.648281] mice: PS/2 mouse device common for all mice
[ 0.648442] rtc_cmos 00:03: RTC can wake from S4
[ 0.648518] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.648553] rtc0: alarms up to one month, 242 bytes nvram
[ 0.648749] device-mapper: uevent: version 1.0.3
[ 0.683571] Freeing initrd memory: 12829k freed
[ 0.712776] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 0.712955] device-mapper: multipath: version 1.1.0 loaded
[ 0.712960] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.713175] EISA: Probing bus 0 at eisa.0
[ 0.713203] Cannot allocate resource for EISA slot 4
[ 0.713227] EISA: Detected 0 cards.
[ 0.713358] cpuidle: using governor ladder
[ 0.713361] cpuidle: using governor menu
[ 0.714022] TCP cubic registered
[ 0.714258] NET: Registered protocol family 10
[ 0.714958] lo: Disabled Privacy Extensions
[ 0.715404] NET: Registered protocol family 17
[ 0.716666] Using IPI No-Shortcut mode
[ 0.716781] PM: Resume from disk failed.
[ 0.716803] registered taskstats version 1
[ 0.717162] Magic number: 14:978:574
[ 0.717329] rtc_cmos 00:03: setting system clock to 2010-06-28 08:34:13 UTC (1277714053)
[ 0.717334] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.717336] EDD information not available.
[ 0.737230] isapnp: No Plug & Play device found
[ 0.737316] Freeing unused kernel memory: 656k freed
[ 0.738282] Write protecting the kernel text: 4676k
[ 0.738342] Write protecting the kernel read-only data: 1840k
[ 0.760808] udev: starting version 151
[ 0.890577] Linux agpgart interface v0.103
[ 0.894763] sata_sil 0000:00:12.0: version 2.4
[ 0.894944] scsi0 : sata_sil
[ 0.895181] scsi1 : sata_sil
[ 0.895440] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
[ 0.895446] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
[ 0.896928] scsi2 : pata_atiixp
[ 0.897131] scsi3 : pata_atiixp
[ 0.898416] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.898420] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.970885] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 1.063394] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-H20L, S742, max UDMA/33
[ 1.079563] ata3.00: configured for UDMA/33
[ 1.214743] ata1: SATA link down (SStatus 0 SControl 310)
[ 1.297292] usb 1-5: configuration #1 chosen from 1 choice
[ 1.408018] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 1.488052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.496329] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-49, max UDMA7
[ 1.496333] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.536353] ata2.00: configured for UDMA/100
[ 1.536527] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 1.536760] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.536771] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.537061] sd 1:0:0:0: [sda] Write Protect is off
[ 1.537066] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.537102] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.537300] sda:
[ 1.538589] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H20L S742 PQ: 0 ANSI: 5
[ 1.542297] usb 1-8: configuration #1 chosen from 1 choice
[ 1.544052] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.544058] Uniform CD-ROM driver Revision: 3.20
[ 1.544208] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.544284] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.546049] sda1 sda2 <
[ 1.553109] Initializing USB Mass Storage driver...
[ 1.553263] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.553390] usbcore: registered new interface driver usb-storage
[ 1.553394] USB Mass Storage support registered.
[ 1.553401] usb-storage: device found at 5
[ 1.553403] usb-storage: waiting for device to settle before scanning
[ 1.565750] sda5 >
[ 1.566153] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.704021] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.704052] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.709372] 8139too Fast Ethernet driver 0.9.28
[ 1.709433] alloc irq_desc for 20 on node -1
[ 1.709436] alloc kstat_irqs on node -1
[ 1.709446] 8139too 0000:02:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.711794] eth0: RealTek RTL8139 at 0xde00, 00:18:f3:d2:5c:27, IRQ 20
[ 1.712990] alloc irq_desc for 21 on node -1
[ 1.712994] alloc kstat_irqs on node -1
[ 1.713000] ohci1394 0000:02:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.745751] [drm] Initialized drm 1.1.0 20060810
[ 1.771464] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fddfe000-fddfe7ff] Max Packet=[1024] IR/IT contexts=[7/8]
[ 1.804362] [drm] radeon defaulting to kernel modesetting.
[ 1.804367] [drm] radeon kernel modesetting enabled.
[ 1.804558] alloc irq_desc for 17 on node -1
[ 1.804562] alloc kstat_irqs on node -1
[ 1.804573] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.808154] [drm] radeon: Initializing kernel modesetting.
[ 1.808343] [drm] register mmio base: 0xFDEF0000
[ 1.808346] [drm] register mmio size: 65536
[ 1.808708] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 1.808726] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[ 1.808731] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.808735] [drm] radeon: VRAM 64M
[ 1.808738] [drm] radeon: VRAM from 0x3C000000 to 0x3FFFFFFF
[ 1.808740] [drm] radeon: GTT 32M
[ 1.808743] [drm] radeon: GTT from 0x40000000 to 0x41FFFFFF
[ 1.808789] [drm] radeon: irq initialized.
[ 1.810956] [drm] Detected VRAM RAM=64M, BAR=128M
[ 1.810962] [drm] RAM width 128bits DDR
[ 1.811092] [TTM] Zone kernel: Available graphics memory: 444014 kiB.
[ 1.811095] [TTM] Zone highmem: Available graphics memory: 480338 kiB.
[ 1.811120] [drm] radeon: 64M of VRAM memory ready
[ 1.811123] [drm] radeon: 32M of GTT memory ready.
[ 1.811147] [drm] GART: num cpu pages 8192, num gpu pages 8192
[ 1.811944] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 1.811963] [drm] radeon: cp idle (0x10000C03)
[ 1.812048] [drm] Loading R300 Microcode
[ 1.812053] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 1.814174] [drm] radeon: ring at 0x0000000040000000
[ 1.814200] [drm] ring test succeeded in 1 usecs
[ 1.814380] [drm] radeon: ib pool ready.
[ 1.814478] [drm] ib test succeeded in 0 usecs
[ 1.814521] [drm] Default TV standard: NTSC
[ 1.814524] [drm] 14.318180000 MHz TV ref clk
[ 1.814758] [drm] Default TV standard: NTSC
[ 1.814762] [drm] 14.318180000 MHz TV ref clk
[ 1.814797] [drm] Radeon Display Connectors
[ 1.814800] [drm] Connector 0:
[ 1.814802] [drm] VGA
[ 1.814805] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 1.814808] [drm] Encoders:
[ 1.814810] [drm] CRT1: INTERNAL_DAC2
[ 1.814813] [drm] Connector 1:
[ 1.814815] [drm] S-video
[ 1.814817] [drm] Encoders:
[ 1.814819] [drm] TV1: INTERNAL_DAC2
[ 1.832030] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 1.927978] [drm] fb mappable at 0xF0040000
[ 1.927982] [drm] vram apper at 0xF0000000
[ 1.927984] [drm] size 5184000
[ 1.927986] [drm] fb depth is 24
[ 1.927988] [drm] pitch is 5760
[ 1.928098] fb0: radeondrmfb frame buffer device
[ 1.928100] registered panic notifier
[ 1.928108] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 1.931037] vga16fb: initializing
[ 1.931042] vga16fb: mapped to 0xc00a0000
[ 1.931046] vga16fb: not registering due to another framebuffer present
[ 1.997070] Console: switching to colour frame buffer device 180x56
[ 2.050754] usb 2-1: configuration #1 chosen from 1 choice
[ 2.356054] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 2.412793] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 2.412801] EXT4-fs (sda5): write access will be enabled during recovery
[ 2.566824] usb 2-2: configuration #1 chosen from 1 choice
[ 2.587889] usbcore: registered new interface driver hiddev
[ 2.592044] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3
[ 2.592176] generic-usb 0003:03F0:0B0C.0001: input,hidraw0: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:13.0-2/input0
[ 2.604712] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input4
[ 2.604884] generic-usb 0003:03F0:0B0C.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:13.0-2/input1
[ 2.604919] usbcore: registered new interface driver usbhid
[ 2.604988] usbhid: v2.6:USB HID core driver
[ 2.692504] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 2.692518] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1837540
[ 2.692641] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1835397
[ 2.692663] EXT4-fs (sda5): 2 orphan inodes deleted
[ 2.692667] EXT4-fs (sda5): recovery complete
[ 3.007381] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 3.048409] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000fd40e4]
[ 6.552241] usb-storage: device scan complete
[ 6.553092] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.553834] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6.554466] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6.555215] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.556012] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.556230] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 6.556427] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 6.556636] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 6.559570] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.560195] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 6.560937] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 6.561820] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 12.549516] udev: starting version 151
[ 12.843208] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
[ 12.843246] usbcore: registered new interface driver usblp
[ 12.971759] cfg80211: Calling CRDA to update world regulatory domain
[ 12.977258] lp: driver loaded but no devices found
[ 13.064836] cfg80211: World regulatory domain updated:
[ 13.064843] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.064847] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.064851] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.064855] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.064858] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.064862] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.110810] type=1505 audit(1277732065.890:2): operation="profile_load" pid=703 name="/sbin/dhclient3"
[ 13.111592] type=1505 audit(1277732065.890:3): operation="profile_load" pid=703 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.112045] type=1505 audit(1277732065.894:4): operation="profile_load" pid=703 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.119369] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.132397] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SM00 [0xb00-0xb07]
[ 13.132403] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.171269] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 13.235092] type=1505 audit(1277732066.014:5): operation="profile_load" pid=857 name="/usr/share/gdm/guest-session/Xsession"
[ 13.237470] type=1505 audit(1277732066.018:6): operation="profile_replace" pid=858 name="/sbin/dhclient3"
[ 13.238245] type=1505 audit(1277732066.018:7): operation="profile_replace" pid=858 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.238684] type=1505 audit(1277732066.018:8): operation="profile_replace" pid=858 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.244242] type=1505 audit(1277732066.026:9): operation="profile_load" pid=859 name="/usr/bin/evince"
[ 13.254763] type=1505 audit(1277732066.034:10): operation="profile_load" pid=859 name="/usr/bin/evince-previewer"
[ 13.261049] type=1505 audit(1277732066.042:11):

Jorge Suárez de Lis (ys) said : #10

Probemos a deshabilitar el kernel modesetting. Para hacerlo:

 - Abre una terminal (aplicaciones » accesorios » terminal).
 - Pon lo siguiente:
    echo options radeon modeset=0 | sudo tee /etc/modprobe.d/radeon-kms.conf

Entonces reinicia e intenta trabajar normal. Si sigue bloqueándose, vuelve a enviarnos la salida de dmesg como hiciste anteriormente.

gabriel dzul (pegaso-181) said : #11

se sigue atorando.no da resultados. a ver si se puede, por lo pronto aquí te dejo de nuevo lo que me pidió. gracias.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3bef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-F7FFF uncachable
[ 0.000000] F8000-FBFFF write-protect
[ 0.000000] FC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03C000000 mask FFC000000 write-combining
[ 0.000000] 2 base 03BF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] modified: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[ 0.000000] modified: 000000003bef3000 - 000000003bf00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 2c2ec000 - 2cf73a0b
[ 0.000000] ACPI: RSDP 000f7900 00014 (v00 HP-CPC)
[ 0.000000] ACPI: RSDT 3bef3040 00038 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3bef30c0 00074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3bef3180 0458B (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3bef0000 00040
[ 0.000000] ACPI: MCFG 3bef7840 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 3bef7780 00068 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 3bef78c0 001E0 (v01 HP-CPC Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 3bef7d50 00167 (v01 HP-CPC CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 70MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [002c2ec000 - 002cf73a0b] RAMDISK ==> [002c2ec000 - 002cf73a0b]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd1bc] BRK ==> [00008da000 - 00008dd1bc]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f5d50] f5d50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003bef0
[ 0.000000] On node 0 totalpages: 245375
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 142 pages used for memmap
[ 0.000000] HighMem zone: 18020 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x83
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3bf00000 (gap: 3bf00000:a4100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243457
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=bb50a72b-63e8-43fe-a1ef-2c2d3208f04d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4909440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003bef0)
[ 0.000000] Memory: 946748k/981952k available (4673k kernel code, 34312k reserved, 2121k data, 656k init, 72648k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.049 MHz processor.
[ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.09 BogoMIPS (lpj=6400196)
[ 0.008029] Security Framework initialized
[ 0.008056] AppArmor: AppArmor initialized
[ 0.008066] Mount-cache hash table entries: 512
[ 0.008220] Initializing cgroup subsys ns
[ 0.008225] Initializing cgroup subsys cpuacct
[ 0.008231] Initializing cgroup subsys memory
[ 0.008240] Initializing cgroup subsys devices
[ 0.008244] Initializing cgroup subsys freezer
[ 0.008247] Initializing cgroup subsys net_cls
[ 0.008273] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008276] CPU: L2 cache: 2048K
[ 0.008280] CPU: Physical Processor ID: 0
[ 0.008283] CPU: Processor Core ID: 0
[ 0.008288] mce: CPU supports 6 MCE banks
[ 0.008301] CPU0: Thermal monitoring enabled (TM1)
[ 0.008307] using mwait in idle threads.
[ 0.008315] Performance Events: no PMU driver, software events only.
[ 0.008322] Checking 'hlt' instruction... OK.
[ 0.028065] ACPI: Core revision 20090903
[ 0.040010] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040019] ftrace: allocating 21771 entries in 43 pages
[ 0.044088] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044452] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.084546] CPU0: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012000] CPU: L2 cache: 2048K
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.012000] CPU1: Thermal monitoring enabled (TM1)
[ 0.172056] CPU1: Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 0.172075] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176026] Brought up 2 CPUs
[ 0.176031] Total of 2 processors activated (6400.49 BogoMIPS).
[ 0.176656] CPU0 attaching sched-domain:
[ 0.176661] domain 0: span 0-1 level MC
[ 0.176665] groups: 0 1
[ 0.176674] CPU1 attaching sched-domain:
[ 0.176677] domain 0: span 0-1 level MC
[ 0.176680] groups: 1 0
[ 0.176831] devtmpfs: initialized
[ 0.176831] regulator: core version 0.5
[ 0.176831] Time: 23:43:30 Date: 07/01/10
[ 0.176831] NET: Registered protocol family 16
[ 0.176831] Trying to unpack rootfs image as initramfs...
[ 0.176831] EISA bus registered
[ 0.176831] ACPI: bus type pci registered
[ 0.176831] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.176831] PCI: MCFG area at e0000000 reserved in E820
[ 0.176831] PCI: Using MMCONFIG for extended config space
[ 0.176831] PCI: Using configuration type 1 for base access
[ 0.176831] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.176831] mtrr: probably your BIOS does not setup all CPUs.
[ 0.176831] mtrr: corrected configuration.
[ 0.180141] bio: create slab <bio-0> at 0
[ 0.181120] ACPI: EC: Look up EC in DSDT
[ 0.188877] ACPI: Interpreter enabled
[ 0.188891] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.188929] ACPI: Using IOAPIC for interrupt routing
[ 0.194273] ACPI: No dock devices found.
[ 0.194425] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.194509] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.194667] pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
[ 0.194679] pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.194690] pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.194701] pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.194713] pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.194725] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
[ 0.194736] pci 0000:00:12.0: reg 30 32bit mmio pref: [0xfdf80000-0xfdffffff]
[ 0.194780] pci 0000:00:12.0: supports D1 D2
[ 0.194854] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[ 0.194991] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.195142] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.195244] pci 0000:00:13.2: supports D1 D2
[ 0.195247] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.195254] pci 0000:00:13.2: PME# disabled
[ 0.195307] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[ 0.195318] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02b000-0xfe02b3ff]
[ 0.195365] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.195425] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.195436] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.195448] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.195462] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.195477] pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
[ 0.195607] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.195690] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.195697] pci 0000:00:14.2: PME# disabled
[ 0.195932] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.195941] pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff]
[ 0.195951] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.195969] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.195989] pci 0000:01:05.0: supports D1 D2
[ 0.196037] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.196042] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.196048] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.196123] pci 0000:02:02.0: reg 10 io port: [0xde00-0xdeff]
[ 0.196137] pci 0000:02:02.0: reg 14 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.196223] pci 0000:02:02.0: supports D1 D2
[ 0.196226] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.196234] pci 0000:02:02.0: PME# disabled
[ 0.196311] pci 0000:02:06.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.196413] pci 0000:02:06.0: supports D1 D2
[ 0.196417] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.196424] pci 0000:02:06.0: PME# disabled
[ 0.196499] pci 0000:00:14.4: transparent bridge
[ 0.196511] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.196518] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.196526] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.196543] pci_bus 0000:00: on NUMA node 0
[ 0.196550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.196919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.197097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.210896] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.211048] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.211189] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.211329] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.211483] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
[ 0.211622] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.211761] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11), disabled.
[ 0.211905] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.212094] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212099] vgaarb: loaded
[ 0.212295] SCSI subsystem initialized
[ 0.212457] libata version 3.00 loaded.
[ 0.212561] usbcore: registered new interface driver usbfs
[ 0.212578] usbcore: registered new interface driver hub
[ 0.212614] usbcore: registered new device driver usb
[ 0.212816] ACPI: WMI: Mapper loaded
[ 0.212819] PCI: Using ACPI for IRQ routing
[ 0.212837] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.212841] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.213055] NetLabel: Initializing
[ 0.213058] NetLabel: domain hash size = 128
[ 0.213061] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.213081] NetLabel: unlabeled traffic allowed by default
[ 0.213124] Switching to clocksource tsc
[ 0.215088] AppArmor: AppArmor Filesystem Enabled
[ 0.215112] pnp: PnP ACPI init
[ 0.215136] ACPI: bus type pnp registered
[ 0.217769] pnp 00:08: mem resource (0xcc000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.217775] pnp 00:08: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.217780] pnp 00:08: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.217785] pnp 00:08: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.217791] pnp 00:08: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.217796] pnp 00:08: mem resource (0x100000-0x3beeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.217880] pnp: PnP ACPI: found 9 devices
[ 0.217883] ACPI: ACPI bus type pnp unregistered
[ 0.217890] PnPBIOS: Disabled by ACPI PNP
[ 0.217913] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.217917] system 00:01: ioport range 0x40b-0x40b has been reserved
[ 0.217921] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.217925] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.217929] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.217933] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.217937] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.217941] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.217945] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.217949] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.217953] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.217963] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.217967] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.217971] system 00:06: ioport range 0x880-0x88f has been reserved
[ 0.217980] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.217989] system 00:08: iomem range 0x3bf00000-0x3bffffff could not be reserved
[ 0.217993] system 00:08: iomem range 0x3bef0000-0x3befffff could not be reserved
[ 0.217997] system 00:08: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.218002] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.218006] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.218010] system 00:08: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.252846] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.252853] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.252860] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff
[ 0.252865] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.252873] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.252878] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.252887] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff
[ 0.252895] pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff
[ 0.252929] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.252932] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.252938] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.252941] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.252945] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.252949] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.252953] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.252956] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.252960] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.252964] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.253039] NET: Registered protocol family 2
[ 0.253197] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.253793] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.255625] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.256683] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.256689] TCP reno registered
[ 0.256920] NET: Registered protocol family 1
[ 0.256954] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.342711] pci 0000:01:05.0: Boot video device
[ 0.343045] cpufreq-nforce2: No nForce2 chipset.
[ 0.343086] Scanning for low memory corruption every 60 seconds
[ 0.343266] audit: initializing netlink socket (disabled)
[ 0.343288] type=2000 audit(1278027807.342:1): initialized
[ 0.356431] highmem bounce pool size: 64 pages
[ 0.356440] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.358730] VFS: Disk quotas dquot_6.5.2
[ 0.358822] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.359686] fuse init (API version 7.13)
[ 0.359814] msgmni has been set to 1708
[ 0.360149] alg: No test for stdrng (krng)
[ 0.360248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.360255] io scheduler noop registered
[ 0.360257] io scheduler anticipatory registered
[ 0.360260] io scheduler deadline registered
[ 0.360315] io scheduler cfq registered (default)
[ 0.360469] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.360500] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.360653] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.360659] ACPI: Power Button [PWRB]
[ 0.360742] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.360746] ACPI: Power Button [PWRF]
[ 0.360813] fan PNP0C0B:00: registered as cooling_device0
[ 0.360821] ACPI: Fan [FAN] (on)
[ 0.361231] processor LNXCPU:00: registered as cooling_device1
[ 0.361509] ACPI: SSDT 3bef7cc0 00087 (v01 HP-CPC Cpu1Ist 00003000 INTL 20040311)
[ 0.362115] processor LNXCPU:01: registered as cooling_device2
[ 0.366186] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.366198] ACPI: Thermal Zone [THRM] (40 C)
[ 0.368207] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.370080] brd: module loaded
[ 0.370771] loop: module loaded
[ 0.370886] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.371109] alloc irq_desc for 22 on node -1
[ 0.371113] alloc kstat_irqs on node -1
[ 0.371124] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.371237] alloc irq_desc for 16 on node -1
[ 0.371239] alloc kstat_irqs on node -1
[ 0.371245] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.371689] Fixed MDIO Bus: probed
[ 0.371750] PPP generic driver version 2.4.2
[ 0.371804] tun: Universal TUN/TAP device driver, 1.6
[ 0.371807] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.371926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.371951] alloc irq_desc for 19 on node -1
[ 0.371953] alloc kstat_irqs on node -1
[ 0.371959] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.371981] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.372028] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.372112] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
[ 0.372188] isapnp: Scanning for PnP cards...
[ 0.421448] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.421683] usb usb1: configuration #1 chosen from 1 choice
[ 0.421736] hub 1-0:1.0: USB hub found
[ 0.421763] hub 1-0:1.0: 8 ports detected
[ 0.421880] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.421923] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.421951] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.422010] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.422043] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
[ 0.513751] usb usb2: configuration #1 chosen from 1 choice
[ 0.513799] hub 2-0:1.0: USB hub found
[ 0.513822] hub 2-0:1.0: 4 ports detected
[ 0.513929] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.513960] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.514017] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.514058] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
[ 0.605775] usb usb3: configuration #1 chosen from 1 choice
[ 0.605827] hub 3-0:1.0: USB hub found
[ 0.605855] hub 3-0:1.0: 4 ports detected
[ 0.605954] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.606115] PNP: No PS/2 controller found. Probing ports directly.
[ 0.652736] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.652758] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.652987] mice: PS/2 mouse device common for all mice
[ 0.653147] rtc_cmos 00:03: RTC can wake from S4
[ 0.653221] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.653256] rtc0: alarms up to one month, 242 bytes nvram
[ 0.653446] device-mapper: uevent: version 1.0.3
[ 0.687638] Freeing initrd memory: 12830k freed
[ 0.716844] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 0.717024] device-mapper: multipath: version 1.1.0 loaded
[ 0.717029] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.717242] EISA: Probing bus 0 at eisa.0
[ 0.717271] Cannot allocate resource for EISA slot 4
[ 0.717295] EISA: Detected 0 cards.
[ 0.717429] cpuidle: using governor ladder
[ 0.717432] cpuidle: using governor menu
[ 0.718086] TCP cubic registered
[ 0.718321] NET: Registered protocol family 10
[ 0.719026] lo: Disabled Privacy Extensions
[ 0.719472] NET: Registered protocol family 17
[ 0.720726] Using IPI No-Shortcut mode
[ 0.720842] PM: Resume from disk failed.
[ 0.720863] registered taskstats version 1
[ 0.721221] Magic number: 2:206:756
[ 0.721387] rtc_cmos 00:03: setting system clock to 2010-07-01 23:43:30 UTC (1278027810)
[ 0.721393] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.721395] EDD information not available.
[ 0.741790] isapnp: No Plug & Play device found
[ 0.741880] Freeing unused kernel memory: 656k freed
[ 0.742857] Write protecting the kernel text: 4676k
[ 0.742916] Write protecting the kernel read-only data: 1840k
[ 0.765640] udev: starting version 151
[ 0.842865] Linux agpgart interface v0.103
[ 0.887098] sata_sil 0000:00:12.0: version 2.4
[ 0.894464] scsi0 : sata_sil
[ 0.896386] scsi1 : sata_sil
[ 0.896724] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
[ 0.896730] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
[ 0.897155] scsi2 : pata_atiixp
[ 0.897304] scsi3 : pata_atiixp
[ 0.898474] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.898479] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.925268] [drm] Initialized drm 1.1.0 20060810
[ 0.974798] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 1.063384] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-H20L, S742, max UDMA/33
[ 1.079338] ata3.00: configured for UDMA/33
[ 1.214716] ata1: SATA link down (SStatus 0 SControl 310)
[ 1.301296] usb 1-5: configuration #1 chosen from 1 choice
[ 1.412018] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 1.488050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.496327] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-49, max UDMA7
[ 1.496331] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.536353] ata2.00: configured for UDMA/100
[ 1.536520] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 1.536753] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.536812] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.536945] sd 1:0:0:0: [sda] Write Protect is off
[ 1.536949] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.536985] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.537196] sda:
[ 1.538496] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H20L S742 PQ: 0 ANSI: 5
[ 1.543923] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.543928] Uniform CD-ROM driver Revision: 3.20
[ 1.544076] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.544143] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.545805] sda1 sda2 <
[ 1.546279] usb 1-8: configuration #1 chosen from 1 choice
[ 1.557184] Initializing USB Mass Storage driver...
[ 1.557345] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.557468] usbcore: registered new interface driver usb-storage
[ 1.557472] USB Mass Storage support registered.
[ 1.557480] usb-storage: device found at 5
[ 1.557482] usb-storage: waiting for device to settle before scanning
[ 1.565536] sda5 >
[ 1.565955] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.704132] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.704178] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.708553] alloc irq_desc for 21 on node -1
[ 1.708557] alloc kstat_irqs on node -1
[ 1.708568] ohci1394 0000:02:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.735306] 8139too Fast Ethernet driver 0.9.28
[ 1.769313] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fddfe000-fddfe7ff] Max Packet=[1024] IR/IT contexts=[7/8]
[ 1.773508] [drm] radeon defaulting to kernel modesetting.
[ 1.773511] [drm] radeon kernel modesetting enabled.
[ 1.773586] alloc irq_desc for 17 on node -1
[ 1.773589] alloc kstat_irqs on node -1
[ 1.773599] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.776712] [drm] radeon: Initializing kernel modesetting.
[ 1.776934] [drm] register mmio base: 0xFDEF0000
[ 1.776937] [drm] register mmio size: 65536
[ 1.777385] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 1.777414] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[ 1.777421] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.777425] [drm] radeon: VRAM 64M
[ 1.777428] [drm] radeon: VRAM from 0x3C000000 to 0x3FFFFFFF
[ 1.777431] [drm] radeon: GTT 32M
[ 1.777433] [drm] radeon: GTT from 0x40000000 to 0x41FFFFFF
[ 1.777496] [drm] radeon: irq initialized.
[ 1.779542] [drm] Detected VRAM RAM=64M, BAR=128M
[ 1.779547] [drm] RAM width 128bits DDR
[ 1.779656] alloc irq_desc for 20 on node -1
[ 1.779659] alloc kstat_irqs on node -1
[ 1.779669] 8139too 0000:02:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.780102] [TTM] Zone kernel: Available graphics memory: 444014 kiB.
[ 1.780106] [TTM] Zone highmem: Available graphics memory: 480338 kiB.
[ 1.780160] [drm] radeon: 64M of VRAM memory ready
[ 1.780163] [drm] radeon: 32M of GTT memory ready.
[ 1.780188] [drm] GART: num cpu pages 8192, num gpu pages 8192
[ 1.780981] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 1.781008] [drm] radeon: cp idle (0x10000C03)
[ 1.781048] [drm] Loading R300 Microcode
[ 1.781053] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 1.781608] eth0: RealTek RTL8139 at 0xde00, 00:18:f3:d2:5c:27, IRQ 20
[ 1.783676] [drm] radeon: ring at 0x0000000040000000
[ 1.783705] [drm] ring test succeeded in 1 usecs
[ 1.783891] [drm] radeon: ib pool ready.
[ 1.783986] [drm] ib test succeeded in 0 usecs
[ 1.784055] [drm] Default TV standard: NTSC
[ 1.784057] [drm] 14.318180000 MHz TV ref clk
[ 1.784153] [drm] Default TV standard: NTSC
[ 1.784156] [drm] 14.318180000 MHz TV ref clk
[ 1.784194] [drm] Radeon Display Connectors
[ 1.784196] [drm] Connector 0:
[ 1.784198] [drm] VGA
[ 1.784202] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 1.784204] [drm] Encoders:
[ 1.784207] [drm] CRT1: INTERNAL_DAC2
[ 1.784209] [drm] Connector 1:
[ 1.784211] [drm] S-video
[ 1.784213] [drm] Encoders:
[ 1.784215] [drm] TV1: INTERNAL_DAC2
[ 1.849027] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 1.897728] [drm] fb mappable at 0xF0040000
[ 1.897731] [drm] vram apper at 0xF0000000
[ 1.897734] [drm] size 5184000
[ 1.897736] [drm] fb depth is 24
[ 1.897738] [drm] pitch is 5760
[ 1.897856] fb0: radeondrmfb frame buffer device
[ 1.897859] registered panic notifier
[ 1.897867] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 1.900679] vga16fb: initializing
[ 1.900684] vga16fb: mapped to 0xc00a0000
[ 1.900688] vga16fb: not registering due to another framebuffer present
[ 1.966127] Console: switching to colour frame buffer device 180x56
[ 2.066681] usb 2-1: configuration #1 chosen from 1 choice
[ 2.372071] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 2.413217] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.573730] usb 2-2: configuration #1 chosen from 1 choice
[ 3.052189] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000fd40e4]
[ 6.556187] usb-storage: device scan complete
[ 6.556927] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.557676] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6.558297] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6.559046] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.559835] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.560050] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 6.560259] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 6.560606] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 6.562524] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.563772] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 6.564402] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 6.565026] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 12.319041] udev: starting version 151
[ 12.430635] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.435982] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SM00 [0xb00-0xb07]
[ 12.435988] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.484334] lp: driver loaded but no devices found
[ 12.734866] cfg80211: Calling CRDA to update world regulatory domain
[ 12.735742] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04
[ 12.735771] usbcore: registered new interface driver usblp
[ 12.788635] usbcore: registered new interface driver hiddev
[ 12.792096] type=1505 audit(1278045822.570:2): operation="profile_load" pid=651 name="/sbin/dhclient3"
[ 12.792941] type=1505 audit(1278045822.570:3): operation="profile_load" pid=651 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.793256] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3
[ 12.793373] type=1505 audit(1278045822.570:4): operation="profile_load" pid=651 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.793409] generic-usb 0003:03F0:0B0C.0001: input,hidraw0: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:13.0-2/input0
[ 12.806048] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input4
[ 12.806264] generic-usb 0003:03F0:0B0C.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:13.0-2/input1
[ 12.806307] usbcore: registered new interface driver usbhid
[ 12.806311] usbhid: v2.6:USB HID core driver
[ 12.822859] cfg80211: World regulatory domain updated:
[ 12.822865] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.822869] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.822873] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.822877] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.822881] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.822884] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.956530] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.048782] hda_codec: ALC883: BIOS auto-probing.
[ 13.050145] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 13.192178] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 13.203783] phy0: Selected rate control algorithm 'minstrel'
[ 13.205132] Registered led device: rt73usb-phy0::radio
[ 13.205158] Registered led device: rt73usb-phy0::assoc
[ 13.205182] Registered led device: rt73usb-phy0::quality
[ 13.205865] usbcore: registered new interface driver rt73usb
[ 13.232892] type=1505 audit(1278045823.010:5): operation="profile_load" pid=881 name="/usr/share/gdm/guest-session/Xsession"
[ 13.241227] type=1505 audit(1278045823.018:6): operation="profile_replace" pid=891 name="/sbin/dhclient3"
[ 13.243644] rt73usb 1-5:1.0: firmware: requesting rt73.bin
[ 13.250855] type=1505 audit(1278045823.026:7): operation="profile_replace" pid=891 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.251303] type=1505 audit(1278045823.026:8): operation="profile_replace" pid=891 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.258561] type=1505 audit(1278045823.034:9): operation="profile_load" pid=897 name="/usr/bin/evince"
[ 13.268882] type=1505 audit(1278045823.046:10): operation="profile_load" pid=897 name="/usr/bin/evince-previewer"
[ 13.276793] type=1505 audit(1278045823.054:11): operation="profile_load" pid=897 name="/usr/bin/evince-thumbnailer"
[ 13.377240] ADDRCONF(NETDEV_UP): wlan0: link is not ready

Jorge Suárez de Lis (ys) said : #12

Puedes probar a actualizar al kernel 2.6.35, que a algunos pone que les soluciona el problema. Puedes instalarlo utilizando este PPA:

Desde una terminal:

  sudo add-apt-repository ppa:kernel-ppa/ppa
  sudo apt-get update
  sudo apt-get install linux-image-2.6.35-6-generic

Cuando se instale, tras reiniciar, podrás seleccionar esta versión en el menú de arranque. Si te da más problemas de los que soluciona, siempre puedes arrancar utilizando el kernel viejo seleccionándolo en el menú.

Can you help with this problem?

Provide an answer of your own, or ask gabriel dzul for more information if necessary.

To post a message you must log in.