dmesg [ 11.164431] pnp: 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 11.164434] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 11.164438] pnp: 00:0c: iomem range 0x100000-0x1fffffff could not be reserved [ 11.167079] Time: tsc clocksource has been installed. [ 11.194791] PCI: Bridge: 0000:00:01.0 [ 11.194793] IO window: disabled. [ 11.194799] MEM window: fa100000-fe1fffff [ 11.194804] PREFETCH window: b9e00000-d9efffff [ 11.194810] PCI: Bridge: 0000:00:1e.0 [ 11.194813] IO window: d000-dfff [ 11.194819] MEM window: fe200000-feafffff [ 11.194824] PREFETCH window: d9f00000-d9ffffff [ 11.194842] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.194856] NET: Registered protocol family 2 [ 11.231039] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 11.231093] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 11.231236] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 11.231337] TCP: Hash tables configured (established 16384 bind 16384) [ 11.231340] TCP reno registered [ 11.243123] checking if image is initramfs... it is [ 11.694318] Switched to high resolution mode on CPU 0 [ 11.902612] Freeing initrd memory: 7116k freed [ 11.903043] audit: initializing netlink socket (disabled) [ 11.903061] audit(1204655994.016:1): initialized [ 11.905462] VFS: Disk quotas dquot_6.5.1 [ 11.905533] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.905643] io scheduler noop registered [ 11.905645] io scheduler anticipatory registered [ 11.905648] io scheduler deadline registered [ 11.905666] io scheduler cfq registered (default) [ 11.905741] Boot video device is 0000:01:00.0 [ 11.905923] isapnp: Scanning for PnP cards... [ 12.259494] isapnp: No Plug & Play device found [ 12.290477] Real Time Clock Driver v1.12ac [ 12.290591] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.290689] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.291612] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 12.292507] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.292770] input: Macintosh mouse button emulation as /class/input/input0 [ 12.292865] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 12.292868] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 12.296481] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.296489] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 12.296718] mice: PS/2 mouse device common for all mice [ 12.296858] EISA: Probing bus 0 at eisa.0 [ 12.296896] EISA: Detected 0 cards. [ 12.297011] TCP cubic registered [ 12.297026] NET: Registered protocol family 1 [ 12.297052] Using IPI No-Shortcut mode [ 12.297237] Magic number: 0:323:695 [ 12.297445] hash matches device 0000:00:00.0 [ 12.297892] Freeing unused kernel memory: 364k freed [ 12.337361] input: AT Translated Set 2 keyboard as /class/input/input1 [ 13.528155] AppArmor: AppArmor initialized<5>audit(1204655995.516:2): type=1505 info="AppArmor initialized" pid=1186 [ 13.537735] fuse init (API version 7.8) [ 13.543204] Failure registering capabilities with primary security module. [ 13.560462] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.560476] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 14.172442] usbcore: registered new interface driver usbfs [ 14.172472] usbcore: registered new interface driver hub [ 14.172498] usbcore: registered new device driver usb [ 14.173513] USB Universal Host Controller Interface driver v3.0 [ 14.173592] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.173605] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.173609] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.173780] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.173810] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800 [ 14.173940] usb usb1: configuration #1 chosen from 1 choice [ 14.173970] hub 1-0:1.0: USB hub found [ 14.173978] hub 1-0:1.0: 2 ports detected [ 14.274488] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 14.274508] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.274512] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.274542] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.274571] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e880 [ 14.274689] usb usb2: configuration #1 chosen from 1 choice [ 14.274719] hub 2-0:1.0: USB hub found [ 14.274729] hub 2-0:1.0: 2 ports detected [ 14.286513] SCSI subsystem initialized [ 14.292702] libata version 2.21 loaded. [ 14.378335] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.378349] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.378353] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.378381] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.378410] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 14.378531] usb usb3: configuration #1 chosen from 1 choice [ 14.378567] hub 3-0:1.0: USB hub found [ 14.378578] hub 3-0:1.0: 2 ports detected [ 14.429671] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 14.429675] e100: Copyright(c) 1999-2006 Intel Corporation [ 14.450243] Floppy drive(s): fd0 is 1.44M [ 14.482723] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 14.482740] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 14.482745] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.482791] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 14.482833] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.482841] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 14.482853] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00 [ 14.507153] FDC 0 is a post-1991 82077 [ 14.514010] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 14.514030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.514199] usb usb4: configuration #1 chosen from 1 choice [ 14.514231] hub 4-0:1.0: USB hub found [ 14.514242] hub 4-0:1.0: 6 ports detected [ 14.618989] ata_piix 0000:00:1f.1: version 2.11 [ 14.619009] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 14.619018] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 14.619074] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 14.619185] scsi0 : ata_piix [ 14.634675] scsi1 : ata_piix [ 14.634832] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 14.634836] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 14.805907] ata1.00: ATA-6: IC35L120AVV207-0, V24OA63A, max UDMA/100 [ 14.805912] ata1.00: 241254720 sectors, multi 16: LBA48 [ 14.829862] ata1.00: configured for UDMA/100 [ 15.312971] ata2.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.06, max UDMA/66 [ 15.312977] ata2.01: ATAPI: TOSHIBA DVD-ROM SD-R5002, 1030, max UDMA/33 [ 15.312982] ata2.00: limited to UDMA/33 due to 40-wire cable [ 15.484765] ata2.00: configured for UDMA/33 [ 15.656494] ata2.01: configured for UDMA/33 [ 15.656631] scsi 0:0:0:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI: 5 [ 15.663105] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.06 PQ: 0 ANSI: 5 [ 15.669000] scsi 1:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-R5002 1030 PQ: 0 ANSI: 5 [ 15.672083] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 15.672093] 3c59x: Donald Becker and others. [ 15.672101] 0000:02:02.0: 3Com PCI 3c905C Tornado at e083ac00. [ 15.695742] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 20 [ 15.745802] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[feaff000-feaff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 15.745994] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 15.769424] e100: eth1: e100_probe: addr 0xfeafe000, irq 21, MAC addr 00:07:E9:89:50:C8 [ 15.789295] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors (123522 MB) [ 15.790263] sd 0:0:0:0: [sda] Write Protect is off [ 15.790267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.790309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.790384] sd 0:0:0:0: [sda] 241254720 512-byte hardware sectors (123522 MB) [ 15.790396] sd 0:0:0:0: [sda] Write Protect is off [ 15.790399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.790419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.790424] sda: sda1 sda2 sda3 sda4 [ 15.819733] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.824344] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.824378] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 15.824400] scsi 1:0:1:0: Attached scsi generic sg2 type 5 [ 15.878311] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 15.878318] Uniform CD-ROM driver Revision: 3.20 [ 15.878605] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 15.889917] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 15.890117] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 16.071582] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 16.142523] Attempting manual resume [ 16.142528] swsusp: Resume From Partition 8:3 [ 16.142530] PM: Checking swsusp image. [ 16.142732] PM: Resume from disk failed. [ 16.172090] kjournald starting. Commit interval 5 seconds [ 16.172104] EXT3-fs: mounted filesystem with ordered data mode. [ 16.248416] usb 3-1: configuration #1 chosen from 1 choice [ 16.490916] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 16.667685] usb 3-2: configuration #1 chosen from 1 choice [ 16.910279] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 17.014244] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00010800300031c6] [ 17.078039] usb 1-1: configuration #1 chosen from 1 choice [ 17.317641] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 17.499299] usb 1-2: configuration #1 chosen from 1 choice [ 24.311393] Linux agpgart interface v0.102 (c) Dave Jones [ 24.375006] agpgart: Detected an Intel 830M Chipset. [ 24.386433] agpgart: AGP aperture is 256M @ 0xe0000000 [ 24.430682] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 24.432877] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.659173] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or [ 24.659176] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if [ 24.659178] you are certain that your <4>intel_rng: system has a functional [ 24.659179] RNG, try<4>intel_rng: using the 'no_fwh_detect' option. [ 25.284054] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 25.284076] usbcore: registered new interface driver usblp [ 25.284079] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 25.558406] iTCO_vendor_support: vendor-support=0 [ 25.631891] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 25.631992] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) [ 25.632042] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 25.690936] usbcore: registered new interface driver hiddev [ 25.711896] input: PC Speaker as /class/input/input2 [ 25.715547] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 [ 25.715623] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1 [ 25.751329] input: Jess Tech GGE909 PC Recoil Pad as /class/input/input4 [ 25.751372] input: USB HID v1.10 Joystick [Jess Tech GGE909 PC Recoil Pad] on usb-0000:00:1d.2-2 [ 25.751393] usbcore: registered new interface driver usbhid [ 25.751397] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.751412] usbcore: registered new interface driver xpad [ 25.751416] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 25.760663] Linux video capture interface: v2.00 [ 25.939086] parport_pc 00:09: reported by Plug and Play ACPI [ 25.939112] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 25.982232] nvidia: module license 'NVIDIA' taints kernel. [ 26.259294] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5xx camera found. (TV8532) [ 26.304510] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.304864] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 26.345447] usbcore: registered new interface driver gspca [ 26.345453] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered [ 26.667704] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20 [ 26.667727] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 27.086637] intel8x0_measure_ac97_clock: measured 54972 usecs [ 27.086641] intel8x0: clocking to 48000 [ 27.304323] lp0: using parport0 (interrupt-driven). [ 27.377093] Adding 1253060k swap on /dev/sda3. Priority:-1 extents:1 across:1253060k [ 27.698650] EXT3 FS on sda2, internal journal [ 28.298585] kjournald starting. Commit interval 5 seconds [ 28.298774] EXT3 FS on sda4, internal journal [ 28.298780] EXT3-fs: mounted filesystem with ordered data mode. [ 29.382215] input: Power Button (FF) as /class/input/input5 [ 29.387184] ACPI: Power Button (FF) [PWRF] [ 29.427078] input: Sleep Button (CM) as /class/input/input6 [ 29.431948] ACPI: Sleep Button (CM) [SLPB] [ 29.625821] No dock devices found. [ 31.243957] eth0: setting full-duplex. [ 33.396905] ppdev: user-space parallel port driver [ 34.371692] audit(1204681216.953:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4932 profile="/usr/sbin/cupsd" [ 34.460785] apm: BIOS not found. [ 34.722607] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 34.722628] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 34.722663] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 37.200425] Failure registering capabilities with primary security module. [ 37.495759] Bluetooth: Core ver 2.11 [ 37.495904] NET: Registered protocol family 31 [ 37.495907] Bluetooth: HCI device and connection manager initialized [ 37.495911] Bluetooth: HCI socket layer initialized [ 37.522542] Bluetooth: L2CAP ver 2.8 [ 37.522548] Bluetooth: L2CAP socket layer initialized [ 37.613175] Bluetooth: RFCOMM socket layer initialized [ 37.613292] Bluetooth: RFCOMM TTY layer initialized [ 37.613296] Bluetooth: RFCOMM ver 1.8 [ 42.494060] NET: Registered protocol family 17 [ 45.458456] NET: Registered protocol family 10 [ 45.458651] lo: Disabled Privacy Extensions [ 45.458861] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 56.354567] eth0: no IPv6 routers present [ 337.115721] usb 4-4: new high speed USB device using ehci_hcd and address 6 [ 337.250211] usb 4-4: configuration #1 chosen from 1 choice [ 337.359133] usbcore: registered new interface driver libusual [ 337.458708] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 337.459018] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 337.463811] Initializing USB Mass Storage driver... [ 337.464182] scsi2 : SCSI emulation for USB Mass Storage devices [ 337.464438] usb-storage: device found at 6 [ 337.464442] usb-storage: waiting for device to settle before scanning [ 337.464785] usbcore: registered new interface driver usb-storage [ 337.464963] USB Mass Storage support registered. [ 342.455674] usb-storage: device scan complete [ 342.456299] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 342.693497] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 342.694121] sd 2:0:0:0: [sdb] Write Protect is off [ 342.694126] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 342.694128] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 342.696363] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 342.696988] sd 2:0:0:0: [sdb] Write Protect is off [ 342.696992] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 342.696995] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 342.696999] sdb: sdb1 [ 342.697822] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 342.697872] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 668.127345] usb 4-4: USB disconnect, address 6 [ 679.450009] usb 4-4: new high speed USB device using ehci_hcd and address 7 [ 679.584391] usb 4-4: configuration #1 chosen from 1 choice [ 679.584640] scsi3 : SCSI emulation for USB Mass Storage devices [ 679.584786] usb-storage: device found at 7 [ 679.584788] usb-storage: waiting for device to settle before scanning [ 684.574346] usb-storage: device scan complete [ 684.575118] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 684.812668] sd 3:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 684.813293] sd 3:0:0:0: [sdb] Write Protect is off [ 684.813297] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 684.813300] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 684.815411] sd 3:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 684.816036] sd 3:0:0:0: [sdb] Write Protect is off [ 684.816040] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 684.816042] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 684.816047] sdb: sdb1 [ 684.816870] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 684.816920] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 692.204529] usb 4-4: USB disconnect, address 7 [ 1145.558219] usb 4-4: new high speed USB device using ehci_hcd and address 8 [ 1145.692591] usb 4-4: configuration #1 chosen from 1 choice [ 1145.692841] scsi4 : SCSI emulation for USB Mass Storage devices [ 1145.692985] usb-storage: device found at 8 [ 1145.692988] usb-storage: waiting for device to settle before scanning [ 1150.682545] usb-storage: device scan complete [ 1150.683223] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 1150.920369] sd 4:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 1150.920993] sd 4:0:0:0: [sdb] Write Protect is off [ 1150.920998] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1150.921000] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1150.923360] sd 4:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 1150.923986] sd 4:0:0:0: [sdb] Write Protect is off [ 1150.923990] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1150.923992] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1150.923997] sdb: sdb1 [ 1150.924818] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1150.924871] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1159.611149] usb 4-4: USB disconnect, address 8 [ 1752.442245] usb 4-4: new high speed USB device using ehci_hcd and address 9 [ 1752.576572] usb 4-4: configuration #1 chosen from 1 choice [ 1752.576811] scsi5 : SCSI emulation for USB Mass Storage devices [ 1752.576958] usb-storage: device found at 9 [ 1752.576961] usb-storage: waiting for device to settle before scanning [ 1757.566540] usb-storage: device scan complete [ 1757.567341] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 1757.804348] sd 5:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 1757.804971] sd 5:0:0:0: [sdb] Write Protect is off [ 1757.804976] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1757.804978] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1757.807215] sd 5:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 1757.807839] sd 5:0:0:0: [sdb] Write Protect is off [ 1757.807842] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1757.807845] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1757.807849] sdb: sdb1 [ 1757.808768] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 1757.808818] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1763.084168] usb 4-4: USB disconnect, address 9 [ 1885.022643] usb 4-4: new high speed USB device using ehci_hcd and address 10 [ 1885.157127] usb 4-4: configuration #1 chosen from 1 choice [ 1885.157377] scsi6 : SCSI emulation for USB Mass Storage devices [ 1885.157531] usb-storage: device found at 10 [ 1885.157534] usb-storage: waiting for device to settle before scanning [ 1890.146954] usb-storage: device scan complete [ 1890.147831] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 1890.384779] sd 6:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 1890.385403] sd 6:0:0:0: [sdb] Write Protect is off [ 1890.385408] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1890.385410] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1890.387521] sd 6:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 1890.388145] sd 6:0:0:0: [sdb] Write Protect is off [ 1890.388149] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1890.388151] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1890.388155] sdb: sdb1 [ 1890.388977] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 1890.389033] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 1894.594291] usb 4-4: USB disconnect, address 10 [ 2011.021161] usb 4-4: new high speed USB device using ehci_hcd and address 11 [ 2011.155639] usb 4-4: configuration #1 chosen from 1 choice [ 2011.155887] scsi7 : SCSI emulation for USB Mass Storage devices [ 2011.156032] usb-storage: device found at 11 [ 2011.156035] usb-storage: waiting for device to settle before scanning [ 2016.145467] usb-storage: device scan complete [ 2016.146153] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 2016.383292] sd 7:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 2016.383915] sd 7:0:0:0: [sdb] Write Protect is off [ 2016.383920] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2016.383922] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 2016.386283] sd 7:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 2016.386908] sd 7:0:0:0: [sdb] Write Protect is off [ 2016.386912] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2016.386914] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 2016.386919] sdb: sdb1 [ 2016.387739] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 2016.387795] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 2088.022916] end_request: I/O error, dev fd0, sector 0 [ 2088.046885] end_request: I/O error, dev fd0, sector 0 [ 2797.086032] end_request: I/O error, dev fd0, sector 0 [ 2797.109994] end_request: I/O error, dev fd0, sector 0 [ 2834.484604] end_request: I/O error, dev fd0, sector 0 [ 2834.508567] end_request: I/O error, dev fd0, sector 0 [ 2888.450142] usb 4-4: USB disconnect, address 11 [ 2893.418079] usb 4-4: new high speed USB device using ehci_hcd and address 12 [ 2893.552467] usb 4-4: configuration #1 chosen from 1 choice [ 2893.552712] scsi8 : SCSI emulation for USB Mass Storage devices [ 2893.552859] usb-storage: device found at 12 [ 2893.552862] usb-storage: waiting for device to settle before scanning [ 2898.542420] usb-storage: device scan complete [ 2898.543203] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 2899.176694] sd 8:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 2899.177319] sd 8:0:0:0: [sdb] Write Protect is off [ 2899.177324] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2899.177326] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 2899.179561] sd 8:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 2899.180186] sd 8:0:0:0: [sdb] Write Protect is off [ 2899.180190] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2899.180192] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 2899.180196] sdb: [ 2899.180998] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 2899.181051] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3150.538099] usb 4-4: USB disconnect, address 12 [ 3157.264911] usb 4-4: new high speed USB device using ehci_hcd and address 13 [ 3157.399323] usb 4-4: configuration #1 chosen from 1 choice [ 3157.399570] scsi9 : SCSI emulation for USB Mass Storage devices [ 3157.399717] usb-storage: device found at 13 [ 3157.399720] usb-storage: waiting for device to settle before scanning [ 3162.389153] usb-storage: device scan complete [ 3162.389915] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 3162.627475] sd 9:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 3162.628101] sd 9:0:0:0: [sdb] Write Protect is off [ 3162.628106] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3162.628108] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 3162.630219] sd 9:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 3162.630843] sd 9:0:0:0: [sdb] Write Protect is off [ 3162.630847] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3162.630849] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 3162.630853] sdb: [ 3162.631651] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 3162.631705] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 3229.714299] usb 4-4: USB disconnect, address 13 [ 3232.888764] usb 4-4: new high speed USB device using ehci_hcd and address 14 [ 3233.023275] usb 4-4: configuration #1 chosen from 1 choice [ 3233.023524] scsi10 : SCSI emulation for USB Mass Storage devices [ 3233.023677] usb-storage: device found at 14 [ 3233.023679] usb-storage: waiting for device to settle before scanning [ 3238.013106] usb-storage: device scan complete [ 3238.013730] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 3238.251427] sd 10:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 3238.252051] sd 10:0:0:0: [sdb] Write Protect is off [ 3238.252055] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3238.252058] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 3238.254168] sd 10:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 3238.254793] sd 10:0:0:0: [sdb] Write Protect is off [ 3238.254797] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3238.254800] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 3238.254804] sdb: [ 3238.255607] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 3238.255658] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 3449.308718] usb 4-4: USB disconnect, address 14 [ 4333.155116] usb 4-4: new high speed USB device using ehci_hcd and address 15 [ 4333.289516] usb 4-4: configuration #1 chosen from 1 choice [ 4333.289758] scsi11 : SCSI emulation for USB Mass Storage devices [ 4333.289922] hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling... [ 4333.289927] usb 3-2: USB disconnect, address 3 [ 4333.290301] usb-storage: device found at 15 [ 4333.290304] usb-storage: waiting for device to settle before scanning [ 4333.398752] usb 3-2: new low speed USB device using uhci_hcd and address 4 [ 4333.573996] usb 3-2: configuration #1 chosen from 1 choice [ 4333.602923] input: Jess Tech GGE909 PC Recoil Pad as /class/input/input7 [ 4333.602978] input: USB HID v1.10 Joystick [Jess Tech GGE909 PC Recoil Pad] on usb-0000:00:1d.2-2 [ 4338.279461] usb-storage: device scan complete [ 4338.280110] scsi 11:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 4338.517409] sd 11:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 4338.518032] sd 11:0:0:0: [sdb] Write Protect is off [ 4338.518037] sd 11:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 4338.518039] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 4338.520401] sd 11:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB) [ 4338.521025] sd 11:0:0:0: [sdb] Write Protect is off [ 4338.521029] sd 11:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 4338.521032] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 4338.521036] sdb: [ 4338.521841] sd 11:0:0:0: [sdb] Attached SCSI removable disk [ 4338.521894] sd 11:0:0:0: Attached scsi generic sg3 type 0 karl@jemoftheplain:~$